共查询到20条相似文献,搜索用时 15 毫秒
1.
Mrinal Pahwa Matthew Kusner Carl D. Hacker David T. Bundy Kilian Q. Weinberger Eric C. Leuthardt 《PloS one》2015,10(11)
Previous studies suggest stable and robust control of a brain-computer interface (BCI) can be achieved using electrocorticography (ECoG). Translation of this technology from the laboratory to the real world requires additional methods that allow users operate their ECoG-based BCI autonomously. In such an environment, users must be able to perform all tasks currently performed by the experimenter, including manually switching the BCI system on/off. Although a simple task, it can be challenging for target users (e.g., individuals with tetraplegia) due to severe motor disability. In this study, we present an automated and practical strategy to switch a BCI system on or off based on the cognitive state of the user. Using a logistic regression, we built probabilistic models that utilized sub-dural ECoG signals from humans to estimate in pseudo real-time whether a person is awake or in a sleep-like state, and subsequently, whether to turn a BCI system on or off. Furthermore, we constrained these models to identify the optimal anatomical and spectral parameters for delineating states. Other methods exist to differentiate wake and sleep states using ECoG, but none account for practical requirements of BCI application, such as minimizing the size of an ECoG implant and predicting states in real time. Our results demonstrate that, across 4 individuals, wakeful and sleep-like states can be classified with over 80% accuracy (up to 92%) in pseudo real-time using high gamma (70–110 Hz) band limited power from only 5 electrodes (platinum discs with a diameter of 2.3 mm) located above the precentral and posterior superior temporal gyrus. 相似文献
2.
This work describes a generalized method for classifying motor-related neural signals for a brain-computer interface (BCI), based on a stochastic machine learning method. The method differs from the various feature extraction and selection techniques employed in many other BCI systems. The classifier does not use extensive a-priori information, resulting in reduced reliance on highly specific domain knowledge. Instead of pre-defining features, the time-domain signal is input to a population of multi-layer perceptrons (MLPs) in order to perform a stochastic search for the best structure. The results showed that the average performance of the new algorithm outperformed other published methods using the Berlin BCI IV (2008) competition dataset and was comparable to the best results in the Berlin BCI II (2002–3) competition dataset. The new method was also applied to electroencephalography (EEG) data recorded from five subjects undertaking a hand squeeze task and demonstrated high levels of accuracy with a mean classification accuracy of 78.9% after five-fold cross-validation. Our new approach has been shown to give accurate results across different motor tasks and signal types as well as between subjects. 相似文献
3.
《IRBM》2019,40(5):297-305
BackgroundBrain Computer Interface (BCI) systems have been widely used to develop sustainable assistive technology for people suffering from neurological impairments. A major limitation of current BCI systems is that they are based on Subject-dependent (SD) concept. The SD based BCI system is time consuming and inconvenient for physical or mental disables people and also not suitable for limited computer resources. In order to overcome these problems, recently subject-independent (SI) based BCI concept has been introduced to identify mental states of motor disabled people but the expected outcome of the SI based BCI has not been achieved yet. Hence this paper intends to present an efficient scheme for SI based BCI system. The goal of this research is to develop a method for classifying mental states which can be used by any user. For attaining this target, this study employs a supervised spatial filtering method with four types of feature extraction methods including Katz Fractal Dimension, Sub band Energy, Log Variance and Root Mean Square (RMS) and finally the obtained features are used as input to Linear Discriminant Analysis (LDA) classification model for identifying mental states for SI BCI system.ResultsThe performance of the proposed design is evaluated in several ways such as considering different time window length; different frequency bands; different number of channels. The mean classification accuracy using Katz feature is 84.35% which is the maximum output compare to other features that outperforms the existing methods.ConclusionsOur proposed design will help to make a new technology for development of real-time SI based BCI systems that can be more supportive for the motor disabled patients. 相似文献
4.
Jinyi Long Zhenghui Gu Yuanqing Li Tianyou Yu Feng Li Ming Fu 《Cognitive neurodynamics》2011,5(4):387-398
In this paper, we address the important problem of feature selection for a P300-based brain computer interface (BCI) speller
system in several aspects. Firstly, time segment selection and electroencephalogram channel selection are jointly performed
for better discriminability of P300 and background signals. Secondly, in view of the situation that training data with labels
are insufficient, we propose an iterative semi-supervised support vector machine for joint spatio-temporal feature selection
as well as classification, in which both labeled training data and unlabeled test data are utilized. More importantly, the
semi-supervised learning enables the adaptivity of the system. The performance of our algorithm has been evaluated through
the analysis of a P300 dataset provided by BCI Competition 2005 and another dataset collected from an in-house P300 speller
system. The results show that our algorithm for joint feature selection and classification achieves satisfactory performance,
meanwhile it can significantly reduce the training effort of the system. Furthermore, this algorithm is implemented online
and the corresponding results demonstrate that our algorithm can improve the adaptiveness of the P300-based BCI speller. 相似文献
5.
A major barrier for a broad applicability of brain-computer interfaces (BCIs) based on electroencephalography (EEG) is the large number of EEG sensor electrodes typically used. The necessity for this results from the fact that the relevant information for the BCI is often spread over the scalp in complex patterns that differ depending on subjects and application scenarios. Recently, a number of methods have been proposed to determine an individual optimal sensor selection. These methods have, however, rarely been compared against each other or against any type of baseline. In this paper, we review several selection approaches and propose one additional selection criterion based on the evaluation of the performance of a BCI system using a reduced set of sensors. We evaluate the methods in the context of a passive BCI system that is designed to detect a P300 event-related potential and compare the performance of the methods against randomly generated sensor constellations. For a realistic estimation of the reduced system''s performance we transfer sensor constellations found on one experimental session to a different session for evaluation. We identified notable (and unanticipated) differences among the methods and could demonstrate that the best method in our setup is able to reduce the required number of sensors considerably. Though our application focuses on EEG data, all presented algorithms and evaluation schemes can be transferred to any binary classification task on sensor arrays. 相似文献
6.
Brain-computer interface (BCI) systems are a promising means for restoring communication to patients suffering from “locked-in” syndrome. Research to improve system performance primarily focuses on means to overcome the low signal to noise ratio of electroencephalogric (EEG) recordings. However, the literature and methods are difficult to compare due to the array of evaluation metrics and assumptions underlying them, including that: 1) all characters are equally probable, 2) character selection is memoryless, and 3) errors occur completely at random. The standardization of evaluation metrics that more accurately reflect the amount of information contained in BCI language output is critical to make progress. We present a mutual information-based metric that incorporates prior information and a model of systematic errors. The parameters of a system used in one study were re-optimized, showing that the metric used in optimization significantly affects the parameter values chosen and the resulting system performance. The results of 11 BCI communication studies were then evaluated using different metrics, including those previously used in BCI literature and the newly advocated metric. Six studies'' results varied based on the metric used for evaluation and the proposed metric produced results that differed from those originally published in two of the studies. Standardizing metrics to accurately reflect the rate of information transmission is critical to properly evaluate and compare BCI communication systems and advance the field in an unbiased manner. 相似文献
7.
Brain-computer interaction (BCI) and physiological computing are terms that refer to using processed neural or physiological signals to influence human interaction with computers, environment, and each other. A major challenge in developing these systems arises from the large individual differences typically seen in the neural/physiological responses. As a result, many researchers use individually-trained recognition algorithms to process this data. In order to minimize time, cost, and barriers to use, there is a need to minimize the amount of individual training data required, or equivalently, to increase the recognition accuracy without increasing the number of user-specific training samples. One promising method for achieving this is collaborative filtering, which combines training data from the individual subject with additional training data from other, similar subjects. This paper describes a successful application of a collaborative filtering approach intended for a BCI system. This approach is based on transfer learning (TL), active class selection (ACS), and a mean squared difference user-similarity heuristic. The resulting BCI system uses neural and physiological signals for automatic task difficulty recognition. TL improves the learning performance by combining a small number of user-specific training samples with a large number of auxiliary training samples from other similar subjects. ACS optimally selects the classes to generate user-specific training samples. Experimental results on 18 subjects, using both nearest neighbors and support vector machine classifiers, demonstrate that the proposed approach can significantly reduce the number of user-specific training data samples. This collaborative filtering approach will also be generalizable to handling individual differences in many other applications that involve human neural or physiological data, such as affective computing. 相似文献
8.
《IRBM》2022,43(4):317-324
Brain-computer interface (BCI) speller is a system that provides an alternative communication for the disable people. The brain wave is translated into machine command through a BCI speller which can be used as a communication medium for the patients to express their thought without any motor movement. A BCI speller aims to spell characters by using the electroencephalogram (EEG) signal. Several types of BCI spellers are available based on the EEG signal. A standard BCI speller system consists of the following elements: BCI speller paradigm, data acquisition system and signal processing algorithms. In this work, a systematic review is provided on the BCI speller system and it includes speller paradigms, feature extraction, feature optimization and classification techniques for BCI speller. The advantages and limitations of different speller paradigm and machine learning algorithms are discussed in this article. Also, the future research directions are discussed which can overcome the limitations of present state-of-the-art techniques for BCI speller. 相似文献
9.
In this work, mechanical vibrotactile stimulation was applied to subjects’ left and right wrist skins with equal intensity, and a selective sensation perception task was performed to achieve two types of selections similar to motor imagery Brain-Computer Interface. The proposed system was based on event-related desynchronization/synchronization (ERD/ERS), which had a correlation with processing of afferent inflow in human somatosensory system, and attentional effect which modulated the ERD/ERS. The experiments were carried out on nine subjects (without experience in selective sensation), and six of them showed a discrimination accuracy above 80%, three of them above 95%. Comparative experiments with motor imagery (with and without presence of stimulation) were also carried out, which further showed the feasibility of selective sensation as an alternative BCI task complementary to motor imagery. Specifically there was significant improvement () from near 65% in motor imagery (with and without presence of stimulation) to above 80% in selective sensation on some subjects. The proposed BCI modality might well cooperate with existing BCI modalities in the literature in enlarging the widespread usage of BCI system. 相似文献
10.
Rafa? Ku? Anna Duszyk Piotr Milanowski Maciej ?ab?cki Maria Bierzyńska Zofia Radzikowska Magdalena Michalska Jaros?aw ?ygierewicz Piotr Suffczyński Piotr Jerzy Durka 《PloS one》2013,8(10)
This article concerns one of the most important problems of brain-computer interfaces (BCI) based on Steady State Visual Evoked Potentials (SSVEP), that is the selection of the a-priori most suitable frequencies for stimulation. Previous works related to this problem were done either with measuring systems that have little in common with actual BCI systems (e.g., single flashing LED) or were presented on a small number of subjects, or the tested frequency range did not cover a broad spectrum. Their results indicate a strong SSVEP response around 10 Hz, in the range 13–25 Hz, and at high frequencies in the band of 40–60 Hz. In the case of BCI interfaces, stimulation with frequencies from various ranges are used. The frequencies are often adapted for each user separately. The selection of these frequencies, however, was not yet justified in quantitative group-level study with proper statistical account for inter-subject variability. The aim of this study is to determine the SSVEP response curve, that is, the magnitude of the evoked signal as a function of frequency. The SSVEP response was induced in conditions as close as possible to the actual BCI system, using a wide range of frequencies (5–30 Hz, in step of 1 Hz). The data were obtained for 10 subjects. SSVEP curves for individual subjects and the population curve was determined. Statistical analysis were conducted both on the level of individual subjects and for the group. The main result of the study is the identification of the optimal range of frequencies, which is 12–18 Hz, for the registration of SSVEP phenomena. The applied criterion of optimality was: to find the largest contiguous range of frequencies yielding the strong and constant-level SSVEP response. 相似文献
11.
Electroencephalogram (EEG) based brain-computer interfaces (BCI) have been studied since the 1970s. Currently, the main focus of BCI research lies on the clinical use, which aims to provide a new communication channel to patients with motor disabilities to improve their quality of life. However, the BCI technology can also be used to improve human performance for normal healthy users. Although this application has been proposed for a long time, little progress has been made in real-world practices due to technical limits of EEG. To overcome the bottleneck of low single-user BCI performance, this study proposes a collaborative paradigm to improve overall BCI performance by integrating information from multiple users. To test the feasibility of a collaborative BCI, this study quantitatively compares the classification accuracies of collaborative and single-user BCI applied to the EEG data collected from 20 subjects in a movement-planning experiment. This study also explores three different methods for fusing and analyzing EEG data from multiple subjects: (1) Event-related potentials (ERP) averaging, (2) Feature concatenating, and (3) Voting. In a demonstration system using the Voting method, the classification accuracy of predicting movement directions (reaching left vs. reaching right) was enhanced substantially from 66% to 80%, 88%, 93%, and 95% as the numbers of subjects increased from 1 to 5, 10, 15, and 20, respectively. Furthermore, the decision of reaching direction could be made around 100-250 ms earlier than the subject's actual motor response by decoding the ERP activities arising mainly from the posterior parietal cortex (PPC), which are related to the processing of visuomotor transmission. Taken together, these results suggest that a collaborative BCI can effectively fuse brain activities of a group of people to improve the overall performance of natural human behavior. 相似文献
12.
DeGusta D Everett MA Milton K 《Proceedings. Biological sciences / The Royal Society》2003,270(Z1):S15-S17
Dental traits have long been assumed to be under selection in mammals, based on the macroevolutionary correlation between dental morphology and feeding behaviour. However, natural selection acting on dental morphology has rarely, if ever, been documented in wild populations. We investigated the possibility of microevolutionary selection on dental traits by measuring molar breadth in a sample of Alouatta palliata (mantled howler monkey) crania from Barro Colorado Island (BCI), Panama. The age at death of the monkeys is an indicator of their fitness, since they were all found dead of natural causes. Howlers with small molars have significantly decreased fitness as they die, on average, at an earlier age (well before sexual maturity) than those with larger molars. This documents the existence of phenotypic viability selection on molar tooth size in the BCI howlers, regardless of causality or heritability. The selection is further shown to occur during the weaning phase of A. palliata life history, establishing a link between this period of increased mortality and selection on a specific morphological feature. These results provide initial empirical support for the long-held assumption that primate molar size is under natural selection. 相似文献
13.
Hsu WY 《International journal of neural systems》2011,21(4):335-350
In this study, we propose a two-stage recognition system for continuous analysis of electroencephalogram (EEG) signals. An independent component analysis (ICA) and correlation coefficient are used to automatically eliminate the electrooculography (EOG) artifacts. Based on the continuous wavelet transform (CWT) and Student's two-sample t-statistics, active segment selection then detects the location of active segment in the time-frequency domain. Next, multiresolution fractal feature vectors (MFFVs) are extracted with the proposed modified fractal dimension from wavelet data. Finally, the support vector machine (SVM) is adopted for the robust classification of MFFVs. The EEG signals are continuously analyzed in 1-s segments, and every 0.5 second moves forward to simulate asynchronous BCI works in the two-stage recognition architecture. The segment is first recognized as lifted or not in the first stage, and then is classified as left or right finger lifting at stage two if the segment is recognized as lifting in the first stage. Several statistical analyses are used to evaluate the performance of the proposed system. The results indicate that it is a promising system in the applications of asynchronous BCI work. 相似文献
14.
R. K. Grigoryan E. U. Krysanova D. A. Kirjanov A. Ya. Kaplan 《Moscow University Biological Sciences Bulletin》2018,73(2):92-96
The purpose of this study was to identify the impact of different discriminative features of stimuli in a P300 brain-computer interface paradigm on overall performance and evoked potentials. It has been shown that stimuli sets with a greater number of discriminative features yield better target selection accuracy. Target selection accuracy was significantly higher for the stimuli that differ from each other by color, shape, and semantics. Highest performance was achieved with the stimuli set containing the largest number of discriminative features, namely a set of nine different-colored letters. This result is mainly due to higher mean P300 peak amplitude for stimuli sets that contain more discriminative features. The results of the study can be used for designing a better user experience in brain-computer interfacing (BCI). Motion of the stimuli presentation point and characteristics of this motion (linear or pseudorandom) did not have any impact on BCI performance. This result is promising for future BCI designs with rapid serial visual presentation using mobile robots or augmented reality as stimuli presentation environment. 相似文献
15.
The goal of a Brain-Computer Interface (BCI) is to control a computer by pure brain activity. Recently, BCIs based on code-modulated visual evoked potentials (c-VEPs) have shown great potential to establish high-performance communication. In this paper we present a c-VEP BCI that uses online adaptation of the classifier to reduce calibration time and increase performance. We compare two different approaches for online adaptation of the system: an unsupervised method and a method that uses the detection of error-related potentials. Both approaches were tested in an online study, in which an average accuracy of 96% was achieved with adaptation based on error-related potentials. This accuracy corresponds to an average information transfer rate of 144 bit/min, which is the highest bitrate reported so far for a non-invasive BCI. In a free-spelling mode, the subjects were able to write with an average of 21.3 error-free letters per minute, which shows the feasibility of the BCI system in a normal-use scenario. In addition we show that a calibration of the BCI system solely based on the detection of error-related potentials is possible, without knowing the true class labels. 相似文献
16.
Clarke AM Drennan MJ McGee M Kenny DA Evans RD Berry DP 《Animal : an international journal of animal bioscience》2009,3(6):791-801
Validation of economic indexes under a controlled experimental environment, can aid in their acceptance and use as breeding tools to increase herd profitability. The objective of this study was to compare intake, growth and carcass traits in bull and steer progeny of high and low ranking sires, for genetic merit in an economic index. The Beef Carcass Index (BCI; expressed in euro (€) and based on weaning weight, feed intake, carcass weight, carcass conformation and fat scores) was generated by the Irish Cattle Breeding Federation as a tool to compare animals on genetic merit for the expected profitability of their progeny at slaughter. A total of 107 male suckler herd progeny, from 22 late-maturing 'continental' beef sires of high (n = 11) or low (n = 11) BCI were compared under either a bull or steer production system, and slaughtered at approximately 16 and 24 months of age, respectively. All progeny were purchased after weaning at approximately 6 to 8 months of age. Dry matter (DM) intake and live-weight gain in steer progeny offered grazed grass or grass silage alone, did not differ between the two genetic groups. Similarly, DM intake and feed efficiency did not differ between genetic groups during an ad libitum concentrate-finishing period on either production system. Carcasses of progeny of high BCI sires were 14 kg heavier (P < 0.05) than those of low BCI sires. In a series of regression analyses, increasing sire BCI resulted in increases in carcass weight (P < 0.01) and carcass conformation (P = 0.051) scores, and decreases in carcass fat (P < 0.001) scores, but had no effect on weaning weight or DM intake of the progeny. Each unit increase in sire expected progeny difference led to an increase in progeny weaning weight, DM intake, carcass weight, carcass conformation score and carcass fat score of 1.0 (s.e. = 0.53) kg, 1.1 (s.e. = 0.32) kg, 1.3 (s.e. = 0.31) kg, 0.9 (s.e. = 0.32; scale 1 to 15) and 1.0 (s.e. = 0.25; scale 1 to 15), respectively, none of which differed from the theoretical expectation of unity. The expected difference in profitability at slaughter between progeny of the high and low BCI sires was €42, whereas the observed phenotypic profit differential of the progeny was €53 in favour of the high BCI sires. Results from this study indicate that the BCI is a useful tool in the selection of genetically superior sires, and that actual progeny performance under the conditions of this study is within expectations for both bull and steer beef production systems. 相似文献
17.
BackgroundSkin problems cause significant sickness in communities with poor living conditions, but they have received less attention in national or global health studies because of their low mortality rates. In many developing regions, the prevalence of parasitic skin diseases among schoolchildren is not reported. Previous studies thus have attempted to identify risk factors for these conditions using the frequentist approach. This study aimed to assess the occurrence and risk factors of skin infections among rural schoolchildren in southern Ethiopia by combining a frequentist and a Bayesian approach.Methodology/Principal findingsUsing three-stage random sampling, we assessed 864 schoolchildren aged 7–14 years from the Wonago district in southern Ethiopia. We detected potential risk factors for scabies, tungiasis, and tinea infections and recorded their hygienic practices and socio-demographic information. The frequentist model revealed a clustering effect of 8.8% at the classroom level and an insignificant effect at the school level. The Bayesian model revealed a clustering effect of 16% at the classroom level and 5.3% at the school level. Almost three-fourths of the sample had at least one type of skin problem, and boys were at higher overall risk than girls (adjusted odds ratio [aOR] 1.55 [95% Bayesian credible interval [BCI] 1.01, 2.28). Risk factors included unclean fingernails (aOR 1.85 [95% BCI 1.08, 2.97]); not washing the body (aOR 1.90 [95% BCI 1.21, 2.85]) and hair (aOR 3.07 [95% BCI 1.98, 4.57]) with soap every week; sharing a bed (aOR 1.97 [95% BCI 1.27, 2.89]), clothes (aOR 5.65 [95% BCI 3.31, 9.21]), or combs (aOR 3.65 [95% BCI 2.28, 5.53]); and living in a poor household (aOR 1.76 [95% BCI 1.03, 2.83]). Washing legs and feet with soap daily was identified as a protective factor for each of the three skin diseases (aOR 0.23 [95% BCI 0.15, 0.33]).Conclusions/SignificanceWe observed high variation in skin problems at the classroom level, indicating the presence of shared risk factors in these locations. The findings suggest the need to improve children’s personal hygiene via health education by schoolteachers and health workers. 相似文献
18.
There have been few reports that investigated the effects of the degree and pattern of a spectral smearing of stimuli due to deteriorated hearing ability on the performance of auditory brain–computer interface (BCI) systems. In this study, we assumed that such spectral smearing of stimuli may affect the performance of an auditory steady-state response (ASSR)-based BCI system and performed subjective experiments using 10 normal-hearing subjects to verify this assumption. We constructed smearing-reflected stimuli using an 8-channel vocoder with moderate and severe hearing loss setups and, using these stimuli, performed subjective concentration tests with three symmetric and six asymmetric smearing patterns while recording electroencephalogram signals. Then, 56 ratio features were calculated from the recorded signals, and the accuracies of the BCI selections were calculated and compared. Experimental results demonstrated that (1) applying smearing-reflected stimuli decreases the performance of an ASSR-based auditory BCI system, and (2) such negative effects can be reduced by adjusting the feature settings of the BCI algorithm on the basis of results acquired a posteriori. These results imply that by fine-tuning the feature settings of the BCI algorithm according to the degree and pattern of hearing ability deterioration of the recipient, the clinical benefits of a BCI system can be improved. 相似文献
19.
Parameter setting plays an important role for improving the performance of a brain computer interface (BCI). Currently, parameters
(e.g. channels and frequency band) are often manually selected. It is time-consuming and not easy to obtain an optimal combination
of parameters for a BCI. In this paper, motor imagery-based BCIs are considered, in which channels and frequency band are
key parameters. First, a semi-supervised support vector machine algorithm is proposed for automatically selecting a set of
channels with given frequency band. Next, this algorithm is extended for joint channel-frequency selection. In this approach,
both training data with labels and test data without labels are used for training a classifier. Hence it can be used in small
training data case. Finally, our algorithms are applied to a BCI competition data set. Our data analysis results show that
these algorithms are effective for selection of frequency band and channels when the training data set is small. 相似文献
20.
Josef Faller Reinhold Scherer Ursula Costa Eloy Opisso Josep Medina Gernot R. Müller-Putz 《PloS one》2014,9(7)
Co-adaptive training paradigms for event-related desynchronization (ERD) based brain-computer interfaces (BCI) have proven effective for healthy users. As of yet, it is not clear whether co-adaptive training paradigms can also benefit users with severe motor impairment. The primary goal of our paper was to evaluate a novel cue-guided, co-adaptive BCI training paradigm with severely impaired volunteers. The co-adaptive BCI supports a non-control state, which is an important step toward intuitive, self-paced control. A secondary aim was to have the same participants operate a specifically designed self-paced BCI training paradigm based on the auto-calibrated classifier. The co-adaptive BCI analyzed the electroencephalogram from three bipolar derivations (C3, Cz, and C4) online, while the 22 end users alternately performed right hand movement imagery (MI), left hand MI and relax with eyes open (non-control state). After less than five minutes, the BCI auto-calibrated and proceeded to provide visual feedback for the MI task that could be classified better against the non-control state. The BCI continued to regularly recalibrate. In every calibration step, the system performed trial-based outlier rejection and trained a linear discriminant analysis classifier based on one auto-selected logarithmic band-power feature. In 24 minutes of training, the co-adaptive BCI worked significantly (p = 0.01) better than chance for 18 of 22 end users. The self-paced BCI training paradigm worked significantly (p = 0.01) better than chance in 11 of 20 end users. The presented co-adaptive BCI complements existing approaches in that it supports a non-control state, requires very little setup time, requires no BCI expert and works online based on only two electrodes. The preliminary results from the self-paced BCI paradigm compare favorably to previous studies and the collected data will allow to further improve self-paced BCI systems for disabled users. 相似文献