Nickel-content of urease from Bacillus pasteurii

Urease from Bacillus pasteurii DSM 33 was purified 34-fold to a maximum specific activity of 996.5 mol urea min^-1 mg^-1 at 30°C. Homogeneity was demonstrated by isoelectric focussing which showed a single protein zone corresponding to a pI of about 4.6. The native enzyme was demonstrated to have a molecular mass of 230000 and to consist of identical subunits of 65 500, as measured by SDS electrophoresis. Radioactive ⁶³Ni-nickel co-chromatographed with urease through gel filtration, ion-exchange, and affinity chromatography. Measuring specific radioactivity, the nickel content was found to be 1.00 (±0.1) g-atom Ni per mol of subunit, and 0.82 g-atom Ni per mol as measured by atomic absorption spectrometry. This indicates that 1 atom of nickel is present in each of four subunits of the enzyme.Non-standard abbreviations SDS sodium dodecyl sulfate     

Purification of lipase from Cunninghamella verticillata and optimization of enzyme activity using response surface methodology

The fungus Cunninghamella verticillata was selected from isolates of oil-mill waste as a potent lipase producer as determined by the Rhodamine-B plate method. The lipase was purified from C. verticillata by ammonium sulphate fractionation, ion exchange chromatography and gel filtration. The purified enzyme was formed from a monomeric protein with molecular masses of 49 and 42 kDa by SDS–PAGE and gel filtration, respectively. The optimum pH at 40 °C was 7.5 and the optimum temperature at pH 7.5 was 40 °C. The enzyme was stable between a pH range of 7.5 and 9.0 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, CdCl₂ and EDTA. However, the presence of Ca²⁺, Mn²⁺ and Ba²⁺ ions enhanced the activity of the enzyme. The activity of purified lipase with respect to pH, temperature and salt concentration was optimized using a Box–Behnken design experiment. A polynomial regression model used in analysing this data, showed a significant lack of fitness. Therefore, quadratic terms were incorporated in the regression model through variables. Maximum lipase activity (100%) was observed with 2 mM CaCl₂, (pH 7.5) at a temperature of 40 °C. Regression co-efficient correlation was calculated as 0.9956.     

Purification and properties of an intracellular leucine aminopeptidase from the fungus,Penicillium citrinum strain IFO 6352

An intracellular leucine aminopeptidase (LAP) fromPenicillium citrinum (IFO 6352) was purified to homogeneity using three successive purification steps. The enzyme has a native molecular mass of 63 kDa using HPLC gel filtration analysis and a molecular mass of 65 kDa when using SDS-polyacrylamide gel electrophoresis. This monomeric aminopeptidase showed maximum enzyme activity at pH 8.5. An optimum temperature was 45–50°C whenl-Leu-p-nitroanilide (pNA) was the substrate, and enzyme activity drastically decreased above 60°C. The Michaelis-Menten constants forl-Leu-pNA andl-Met-pNA were 2.7 mM and 1.8 mM, respectively. When the enzyme reacted with biosynthetic methionyl human growth hormone, it showed high specificity for N-terminal methionine residue and recognized a stop sequence (Xaa-Pro). The aminopeptidase was inactivated by EDTA or 1,10-phenanthroline, indicating that it is a metallo-exoprotease. Enzyme activity was restored to 90% of maximal activity by addition of Co²⁺ ions. The activity of EDTA-treated enzyme was restored by addition of Zn²⁺, but reconstitution with Ca²⁺, Mg²⁺ or Mn²⁺ restored some enzyme activity. It is likely that Co²⁺ ions play an important role in the catalysis or stability of thePenicillium citrinum aminopeptidase, as zinc plays a similar function in other leucine aminopeptidases.     

A novel fibrinolytic enzyme from <Emphasis Type="Italic">Cordyceps militaris</Emphasis>, a Chinese traditional medicinal mushroom

A novel fibrinolytic enzyme from Cordyceps militaris was purified and partially characterized for the first time, which was designated C. militaris fibrinolytic enzyme (CMase). This extracellular enzyme from C. militaris was isolated by ammonium sulphate fraction, and purified to electrophoretic homogeneity using gel filtration chromatography. The apparent molecular mass of the purified enzyme was estimated to be 27.3 kDa by SDS-PAGE. The optimum pH and temperature for the enzyme activity were pH 6.0 and 25 °C, respectively. In the presence of metal ions such as Mg²⁺ and Fe²⁺ ions the activity of the enzyme increased, whereas EDTA and Cu²⁺ ion inhibited the enzyme activity. Interestingly the N-terminal amino acid sequences of the enzyme is extremely similar to those of the trypsin proteinases from insects, and has no significant homology with those of the fibrinolytic enzyme from other medicinal mushroom. In conclusion, C. militaris produces a strong fibrinolytic enzyme CMase and may be considered as a new source for thrombolytic agents.     

Characterization of urease from Sporosarcina ureae

Alkaline stable (pH 7.75–12.5) urease from Sporosarcina ureae was purified over 400-fold by ion exchange and hydrophobic interaction chromatography. The cytoplasmic enzyme was remarkably active with a specific activity of greater than 9300 μmol urea degraded min^-1 mg protein^-1 at pH 7.5, where it has optimal activity. Although S. ureae is closely related to Bacillus pasteurii, known to posses a homopolymeric urease containing 1 nickel per subunit [M _r=65000], the S. ureae enzyme is comprised of three subunits [apparent M _r=63100 (α), 14500 (β), and 8500 (γ)] in an estimated ∝βγ stoichiometry and contains 2.1±0.6 nickel ions per ∝βγ unit as measured by atomic absorption spectrometry. Stationary phase cultures sometimes possessed low levels of urease activity, but the specific activity of cell extracts of partially purified urease preparations from such cultures could be elevated by heat treatment, dilution, or dialysis to values comparable to those observed in samples from exponentially grown cells.     

Purification and properties of extracellular phytase from Bacillus sp. KHU-10

Bacillus species producing a thermostable phytase was isolated from soil, boiled rice, and mezu (Korean traditinal koji). The activity of phytase increased markedly at the late stationary phase. An extracellular phytase from Bacillus sp. KHU-10 was purified to homogeneity by acetone precipitation and DEAE-Sepharose and phenyl-Sepharose column chromatographies. Its molecular weight was estimated to be 46 kDa on gel filtration and 44 kDa on SDS-polyacrylamide gel elctrophoresis. Its optimum pH and temperature for phytase activity were pH 6.5-8.5 and 40°C without 10 mM CaCl₂ and pH 6.0-9.5 and 60°C with 10 mM CaCl₂. About 50% of its original activity remained after incubation at 80°C or 10 min in the presence of 10 mM CaCl₂. The enzyme activity was fairly stable from pH 6.5 to 10.0. The enzyme had an isoelectric point of 6.8. As for substrate specificity, it was very specific for sodium phytate and showed no activity on other phosphate esters. The K _m value for sodium phytate was 50 M. Its activity was inhibited by EDTA and metal ions such as Ba²⁺, Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Hg²⁺, and Mn²⁺ ions.     

Nickel requirement for the formation of active urease in purple sulfur bacteria (Chromatiaceae)

Nickel was found to be required for expression of urease activity in batch cultures of Thiocapsa roseopersicina strain 6311, Chromatium vinosum strain 1611 and Thiocystis violacea strain 2311, grown photolithotrophically with NH₄Cl as nitrogen source. In a growth medium originally free of added nickel and EDTA, the addition of 0.1–10 M nickel chloride caused an increase in urease activity, while addition of EDTA (0.01–2 mM) caused a strong reduction. Variation of the nitrogen source had no pronounced influence on the level of urease activity in T. roseopersicina grown with 0.1 M nickel in the absence of EDTA. Only nickel, of several heavy metal ions tested, could reverse suppression of urease activity by EDTA. Nickel, however, did not stimulate and EDTA did not inhibit the enzyme in vitro. When nickel was added to cultures already growing in a nickel-deficient, EDTA-containing medium, urease activity showed a rapid increase which was not inhibited by chloramphenicol. It is concluded that the (inactive) urease apoprotein may be synthesized in the absence of nickel and can be activated in vivo without de novo protein synthesis by insertion of nickel into the pre-formed enzyme protein.     

Purification of lipase from Geotrichum candidum: conditions optimized for enzyme production using Box–Behnken design

The fungus Geotrichum candidum was selected from isolates of oil-mill waste as a potent lipase producer. Factors affecting lipase production by the fungus G. candidum in yeast-extract-peptone medium have been optimized by using a Box–Behnken design with seven variables to identify the significant correlation between effects of these variables in the production of the enzyme lipase. The experimental values were found to be in accordance with the predicted values, the correlation coefficient is 0.9957. It was observed that the variables days (6), pH (7.0), temperature (30 °C), carbon (1.25%), nitrogen (2.0%), Tween (1.0%) and salt concentrations (0.5 mM) were the optimum conditions for maximum lipase production (87.7 LU/ml). The enzyme was purified to homogeneity with an apparent molecular mass of 32 kDa by SDS-PAGE. The optimum pH at 40 °C was 7.0 and the optimum temperature at pH 7.0 was 40 °C. The enzyme was stable within a pH range of 6.5 to 8.5 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, and EDTA. However, the presence of Ca²⁺ and Ba²⁺ ions enhanced the activity of the enzyme.     

Evidence for carrier-mediated,energy-dependent uptake of urea in some bacteria

Evidence for the existence of an energy-dependent urea permease was found for Alcaligenes eutrophus H16 and Klebsiella pneumoniae M5a1 by studying uptake of ¹⁴C-urea. Since intracellular urea was metabolized immediately, uptake did not result in formation of an urea pool. Evidence is based on observations that the in vivo urea uptake and in vitro urease activity differ significantly with respect to kinetic parameters, temperature optimum, pH optimum, response towards inhibitors and regulation. The K _m for urea uptake was 15–20 times lower (38 M and 13 M urea for A. eutrophus and K. pneumoniae, respectively) than the K _m of urease for urea (650 M and 280 M urea), the activity optimum for A. eutrophus was at pH 6.0 and 35°C for the uptake and pH 9.0 and 65°C for urease. Uptake but not urease activity in both organisms strongly decreased upon addition of inhibitors of energy metabolism, while in K. pneumoniae, potent inhibitors of urease (thiourea and hydroxyurea) did not affect the uptake process. Significant differences in the uptake rates were observed during growth with different nitrogen sources (ammonia, nitrate, urea) or in the absence of a nitrogen source; this suggested that a carrier is involved which is subject to nitrogen control. Some evidence for the presence of an energy-dependent uptake of urea was also obtained in Pseudomonas aeruginosa DSM 50071 and Providencia rettgeri DSM 1131, but not in Proteus vulgaris DSM 30118 and Bacillus pasteurii DSM 33.Non-standard abbreviations CCCP Carbonylcyanide-m-chlorphenylhydrazone - DCCD dicyclohexylcarbodiimide - DNP 2,4-dinitrophenole     

Energieabhängige 63Ni-Aufnahme bei Alcaligenes eutrophus Stamm H 1 und H 16

Zusammenfassung Die Kinetik der Aufnahme von ⁶³Ni wurde an zwei Stämmen von Alcaligenes eutrophus untersucht, die Nickelionen für das chemolithotrophe Wachstum benötigen. Mit Kohlendioxid als einziger Kohlenstoffquelle wird das Wachstum durch niedrige Konzentrationen von Nickel gefördert, wobei das Optimum der Wachstumsförderung bei 0,3 M Nickel lag. Höhere Nickelkonzentrationen wirkten hemmend. Das heterotrophe Wachstum mit Fructose wurde durch Nickelionen nicht gefördert. — Übertragen in Phosphatpuffer, der von Schwermetallionen befreit worden war, zeigten autotroph gewachsene Zellen eine rasche Aufnahme von ⁶³Ni, sofern Wasserstoff, Sauerstoff und Kohlendioxid zugegen waren. Dabei wurde Nickel innerhalb von 60 min aus dem umgebenden Medium bis zur 280 fachen Konzentration in den Zellen angehäuft. Die beobachtete Ni-Aufnahme zeigte ein Temperaturoptimum bei etwa 29° C und wurde durch Hemmstoffe wie Arsenit, Jodacetat, Methylenblau, Natriumazid und Natriumcyanid stark beeinträchtigt. Andere Schwermetallionen (Zn, Co, Mn und Cu) verminderten die Nickelaufnahme nur geringfügig. Durch ⁵⁸NiCl₂ und Toluol wurde der Efflux von ⁶³Ni aus den Zellen gefördert. Die Beobachtungen lassen darauf schließen, daß Nickelionen durch einen energieabhängigen Prozeß in chemolithotroph gewachsenen Zellen dieser Stämme angehäuft werden.

---

Energy-dependent ⁶³Ni-uptake by Alcaligenes eutrophus strains H 1 and H 16

Kinetic studies of the uptake of ⁶³Ni were undertaken with two strains of Alcaligenes eutrophus, known to require nickel ions for chemolithotrophic growth. Using carbon dioxide as sole carbon source, growth is stimulated by low concentrations of nickel with optimum concentration for growth stimulation at about 0.3 M nickel. Higher nickel concentrations were inhibitory. Heterotrophic growth on fructose was not stimulated by nickel ions.-Upon transfer into phosphate buffer freed of heavy metal ions, autotrophically grown cells exhibited rapid uptake of ⁶³Ni which was dependent upon th presence of hydrogen, oxygen and carbon dioxide. Within 60 min nickel was accumulated from the medium, reaching 280-fold concentration in the cells. The observed uptake exhibited a temperature optimum at about 29° C and was markedly inhibited by metabolic inhibitors such as arsenite, iodoacetate, methylene-blue, sodium azide and sodium cyanide. Other heavy metal ions (Zn, Co, Mn and Cu) only slightly inhibited ⁶³Ni-uptake. The efflux of ⁶³Ni from the cells was stimulated by ⁵⁸NiCl₂ and by toluene. These data indicate that nickel ions are accumulated by an energy dependent mechanism in chemolithotrophically grown cells of these strains.

     

Immobilization of watermelon (<Emphasis Type="Italic">Citrullus vulgaris</Emphasis>) urease in agarose gel for urea estimation

Urease from dehusked seeds of watermelon was immobilized in 1.5% agarose gel with 53.9% entrapment. There was negligible leaching (<10% at 4°C) and the same gel membrane could repeatedly be used for seven days. The immobilization exhibited no apparent change in the optimum pH but there was a significant decrease in the optimum temperature (50°C as compared to 65°C for soluble urease). The immobilized urease revealed an apparentK _m of 9.3±0.3 mM; 1.2 times lower than the soluble enzyme (11.4±0.2 mM). Unlike soluble enzyme which was inhibited at 200 mM urea, the immobilized urease was inhibited at 600 mM of urea and above, and about 47% activity was retained at 2 M urea. The time-dependent thermal inactivation kinetics at 48 and 52°C was found to be biphasic, in which half of the initial activity was destroyed more rapidly than the remaining half. These gel membranes were also used for estimating the urea content of the blood samples from the University hospital. The results obtained matched well with those obtained by the usual method employed in the clinical pathology laboratory. The significance of these observations is discussed.     

Peroxidase from Bacillus sp. VUS and its role in the decolorization of textile dyes

Peroxidase was purified by an ion exchange chromatography followed by gel filtration chromatography from dye degrading Bacillus sp. strain VUS. The optimum pH and temperature of the enzyme activity was 3.0 and 65°C, respectively. This enzyme showed more activity with n-propanol than other substrates tested viz. xylidine, 3-(3,4-dihydroxy phenyl) Lalanine (L-DOPA), hydroxyquinone, ethanol, indole, and veratrole. Km value of the enzyme was 0.076 mM towards n-propanol under standard assay conditions. Peroxidase was more active in presence of the metal ions like Li²⁺, Co²⁺, K²⁺, Zn²⁺, and Cu²⁺ where as it showed less activity in the presence of Ca²⁺ and Mn²⁺. Inhibitors like ethylenediamine tetraacetic acid (EDTA), glutamine, and phenylalanine inhibited the enzyme partially, while sodium azide (NaN₃) completely. The crude as well as the purified peroxidase was able to decolourize different industrial dyes. This enzyme decolourized various textile dyes and enhanced percent decolourization in the presence of redox mediators. Aniline was the most effective redox mediator than other mediators tested. Gas chromatography-Mass spectrometry (GC-MS) confirmed the formation of 7-Acetylamino-4-hydroxy-naphthalene-2-sulphonic acid as the final product of Reactive Orange 16 indicating asymmetric cleavage of the dye.     

Purification and properties of a collagenolytic protease produced by marine bacteriumVibrio vulnificus CYK279H

A collagenolytic enzyme, produced byVibrio vulnificus CYK279H, was purified by ultrafiltration, dialysis, Q-Sepharose ion exchange and Superdex-200 gel chromatography. The enzyme from the supernatant was purified 13.2 fold, with a yield of 11.4%. The molecular weight of the purified enzyme was estimated by SDS-PAGE to be approximately 35.0 kDa. The N-terminal sequence of the enzyme was determined as Gly-Asp-Pro-Cys-Met-Pro-Ile-Ile-Asn. The optimum temperature and pH for the enzyme activity were 35°C and 7.5, respectively. The enzyme activity was stable within the pH and temperature ranges 6.8∼8.0 and 20∼35°C, respectively. The purified enzyme was strongly activated by Zn²⁺, Li²⁺, and Ca²⁺, but inhibited by Cu²⁺. In addition, the enzyme was strongly inhibited by 1, 10-phenanthroline and EDTA. The purified enzyme was suggested to be a neutral metalloprotease.     

Purification and characterization of a new type of serine carboxypeptidase from<Emphasis Type="Italic"> Monascus purpureus</Emphasis>

Carboxypeptidase produced by Monascus purpureus IFO 4478 was purified to homogeneity. The purified enzyme is a heterodimer with a molecular mass of 132 kDa and consists of two subunits of 64 and 67 kDa. It is an acidic glycoprotein with an isoelectric point of 3.67 and 17.0% carbohydrate content. The optimum pH and temperature were 4.0 and 40 °C, respectively. The enzyme was stable between pH 2.0 and 8.0 at 37 °C for 1 h, and up to 50 °C at pH 5.0 for 15 min. The enzyme was strongly inhibited by piperastatin A, diisopropylfluoride phosphate (DFP), phenylmethylsulfonylfluoride (PMSF), and chymostatin, suggesting that it is a chymotrypsin-like serine carboxypeptidase. Monascus purpureus carboxypeptidase was also strongly inhibited by p-chloromercuribenzoic acid (PCMB) but not by ethylenediaminetetraacetic acid (EDTA) and 1,10-phenanthroline, indicating that it requires cysteine residue but not metal ions for activity. Benzyloxycarbonyl-l-tyrosyl-l-glutamic acid (Z-Tyr-Glu), among the substrates tested, was the best substrate of the enzyme. The K_m, V_max, K_cat, and K_cat/K_m values of the enzyme for Z-Tyr-Glu at pH 4.0 and 37 °C were 0.86 mM, 0.917 mM min^–1, 291 s^–1, and 339 mM^–1 s^–1, respectively.     

Partial purification and some properties of an alkaline cellulase from an alkalophilic Bacillus sp.

A newly isolated Bacillus species, which grew optimally at 30°C and pH 10, produced a carboxymethylcellulase in a medium containing 10 g CM-cellulose/l. The enzyme, when partially purified by gel filtration, had a mass of about 29 kDa as determined by both SDS-PAGE and gel filtration chromatography. It was optimally active at pH 9.5 and 40°C, and was stable from pH 7 to 11 at 4°C for 24 h. The enzyme was stimulated by Ca²⁺ (1mm) but was completely inhibited by Hg²⁺ (1mm). Neither EDTA nor EGTA (10mm) affected the activity.The author is with the Department of Biological Sciences, University of Jordan. PO Box 2686, Amman 11181, Jordan     

Purification and properties of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis><Emphasis Type="Italic">S</Emphasis>-adenosylmethionine synthetase expressed in recombinant <Emphasis Type="Italic">Pichia pastoris</Emphasis>

An intracellular S-adenosylmethionine synthetase (SAM-s) was purified from the fermentation broth of Pichia pastoris GS115 by a sequence chromatography column. It was purified to apparent homogeneity by (NH₄)₂SO₄ fractionation (30–60%), anion exchange, hydrophobic interaction, anion exchange and gel filtration chromatography. HPLC showed the purity of purified SAM-s was 91.2%. The enzyme was purified up to 49.5-fold with a final yield of 20.3%. The molecular weight of the homogeneous enzyme was 43.6 KDa, as determined by electro-spray ionization mass spectrometry (ESI-MS). Its isoelectric point was approximately 4.7, indicating an acidic character. The optimum pH and temperature for the enzyme reaction were 8.5 and 35 °C, respectively. The enzyme was stable at pH 7.0–9.0 and was easy to inactivate in acid solution (pH ≤ 5.0). The temperature stability was up to 45 °C. Metal ions, such as, Mn²⁺ and K⁺ at the concentration of 5 mM had a slight activation effect on the enzyme activity and the Mg²⁺ activated the enzyme significantly. The enzyme activity was strongly inhibited by heavy metal ions (Cu²⁺ and Ag²⁺) and EDTA. The purified enzyme from the transformed Pichia pastoris synthesized S-adenosylmethionine (SAM) from ATP and l-methionine in vitro with a K _m of 120 and 330 μM and V _max of 8.1 and 23.2 μmol/mg/min for l-methionine and ATP, respectively.     

Purification and Properties of a Phytate-degrading Enzyme from <Emphasis Type="Italic">Pantoea agglomerans</Emphasis>

A periplasmatic phytate-degrading enzyme from Pantoea agglomerans isolated from soil was purified about 470-fold to apparent homogeneity with a recovery of 16% referred to the phytate-degrading activity in the crude extract. It behaved as a monomeric protein with a molecular mass of about 42 kDa. The purified enzyme exhibited a single pH optimum at 4.5. Optimum temperature for the degradation of phytate was 60°C. The kinetic parameters for the hydrolysis of sodium phytate were determined to be K_M = 0.34 mmol/l and k_cat = 21 s^-1 at pH 4.5 and 37°C. The enzyme exhibited a narrow substrate selectivity. Only phytate and glucose-1-phosphate were identified as good substrates. Since this Pantoea enzyme has a strong preference for glucose-1-phosphate over phytate, under physiological conditions glucose-1-phosphate is its most likely substrate. The maximum amount of phosphate released from phytate by the purified enzyme suggests myo-inositol pentakisphosphate as the final product of enzymatic phytate degradation.     

Purification and some properties of glyceraldehyde 3-phosphate dehydrogenase fromSynechococcus sp.

Glyceraldehyde 3-phosphate dehydrogenase (EC 1.2.1.13) was purified 386 fold to apparent homogeneity from the thermophilic cyanobacteriumSynechococcus sp. grown at optimum light intensities in batch cultures. The molecular mass of the tetrameric form of the enzyme was 160 kDa as determined by gel filtration and sucrose gradient centrifugation in a phosphate buffer containing DTT. The pH optimum for the oxidation of NADPH was broad (6–8) and the enzyme had a pI of 4.5. The turnover number was 36,000 min^–1 at 40° C. The activation energy was 12.4 Kcal for t>29° C and 20.6 Kcal for t<29° C. The specific absorption coefficient, A _{280 mm} ^{1% 1cm} of the pure enzyme in phosphate buffer at pH 6.8 was 15.2.By SDS gel electrophoresis molecular masses of 78 kDa and 39 kDa were found, indicating that the purified enzyme is a tetramer, probably a homotetramer.When Tris was used as buffer in the homogenization and phosphate and DTT were omitted, a high molecular form with a molecular mass above 500 kDa was found. This form was less active than the purified tetrameric form. Acetone and other organic solvents stimulated the native enzyme several fold.     

Purification and characterization of an aminopeptidase fromStreptococcus mitis ATCC 903

An aminopeptidase isolated from the cytoplasmic fraction of a cell extract ofStreptococcus mitis ATCC 903 was purified 330-fold by ion-exchange chromatography, gel filtration, and hydroxyapatite chromatography. The partially purified enzyme had a broad substrate specificity. Twelve aminoacyl-ß-naphthylamide substrates were hydrolyzed and also several di-, tri-, tetra-, and pentapeptides and bradykinin. The enzyme hydrolyzed arginine-ß-naphthylamide at the highest rate. Optimal conditions for activity were at pH 7.0–7.2 and at 37–40°C. The molecular weight of the enzyme was estimated to be 93,000. The enzyme was activated by Co²⁺ ions. Hg²⁺ inhibited the activity completely. SDS, EDTA, urea, and pCMB also inhibited activity. Inhibition by EDTA could be completely reversed by dialysis and addition of Co²⁺ ions. Reducing agents, sodium fluoride, and PMSF had no effect on the activity of the enzyme. The isoelectric point of the enzyme was at pH 4.3. High substrate concentrations inhibited activity. Substrate inhibition increased in the presence of high concentrations of Co²⁺ ions.     

The role of nickel in urea assimilation by algae

Nickel is required for urease synthesis by Phaeodactylum tricornutum and Tetraselmis subcordiformis and for growth on urea by Phaeodactylum. There is no requirement for nickel for urea amidolyase synthesis by Chlorella fusca var. vacuolata. Neither copper nor palladium can substitute for nickel but cobalt partially restored urease activity in Phaeodactylum. The addition of nickel to nickel-deficient cultures of Phaeodactylum or Tetraselmis resulted in a rapid increase of urease activity to 7–30 times the normal level; this increase was not inhibited by cycloheximide. It is concluded that nickel-deficient cells over-produce a non-functional urease protein and that either nickel or the functional urease enzyme participates in the regulation of the production of urease protein.Abbreviation UALase ATP; urea amidolyase