3D Graphene‐Based H2‐Production Photocatalyst and Electrocatalyst

Hydrogen (H₂) has been deemed as the most promising and valuable alternative to nonrenewable fossil fuels. Photocatalytic and electrocatalytic water splitting are considered to be the most efficient and environmentally friendly approaches for the sustainable H₂ evolution reaction (HER). Graphene with a 3D framework has been utilized for the HER due to its unique structure and properties, including its hierarchical network, large specific surface area, diverse pore distribution, outstanding light absorption ability, and excellent electrical conductivity. The large specific surface area and hierarchically porous structure of 3D graphene can not only maximize the exposure of active sites but also promote electron transfer and gas product diffusion. In addition, the free‐standing 3D graphene monolith is easily recycled compared with powder phase support, which can prevent the loss of active catalysts. By making full use of the aforementioned merits, 3D graphene‐based composite materials show great promise as high‐performance catalysts toward photocatalytic and electrocatalytic HER. In this review, recent advances in fabricating 3D graphene‐based composite materials and their applications in both photocatalytic and electrocatalytic HER are summarized and discussed. Furthermore, the current challenges and future vision associated with the design, fabrication, and integration of 3D graphene‐based composite materials toward HER are put forward.     

3D Hierarchical Porous α‐Fe2O3 Nanosheets for High‐Performance Lithium‐Ion Batteries

To develop a long cycle life and good rate capability electrode, 3D hierarchical porous α‐Fe₂O₃ nanosheets are fabricated on copper foil and directly used as binder‐free anode for lithium‐ion batteries. This electrode exhibits a high reversible capacity and excellent rate capability. A reversible capacity up to 877.7 mAh g^?1 is maintained at 2 C (2.01 A g^?1) after 1000 cycles, and even when the current is increased to 20 C (20.1 A g^?1), a capacity of 433 mA h g^?1 is retained. The unique porous 3D hierarchical nanostructure improves electronic–ionic transport, mitigates the internal mechanical stress induced by the volume variations of the electrode upon cycling, and forms a 3D conductive network during cycling. No addition of any electrochemically inactive conductive agents or polymer binders is required. Therefore, binder‐free electrodes further avoid the uneven distribution of conductive carbon on the current collector due to physical mixing and the addition of an insulator (binder), which has benefits leading to outstanding electrochemical performance.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

High Efficiency Photocatalytic Water Splitting Using 2D α‐Fe2O3/g‐C3N4 Z‐Scheme Catalysts

Photocatalysis is the most promising method for achieving artificial photosynthesis, but a bottleneck is encountered in finding materials that could efficiently promote the water splitting reaction. The nontoxicity, low cost, and versatility of photocatalysts make them especially attractive for this application. This study demonstrates that small amounts of α‐Fe₂O₃ nanosheets can actively promote exfoliation of g‐C₃N₄, producing 2D hybrid that exhibits tight interfaces and an all‐solid‐state Z‐scheme junction. These nanostructured hybrids present a high H₂ evolution rate >3 × 10⁴ µmol g^‐1 h^‐1 and external quantum efficiency of 44.35% at λ = 420 nm, the highest value so far reported among the family of g‐C₃N₄ photocatalysts. Besides effectively suppressing the recombination of electron–hole pairs, this Z‐scheme junction also exhibits activity toward overall water splitting without any sacrificial donor. The proposed synthetic route for controlled production of 2D g‐C₃N₄‐based structures provides a scalable alternative toward the development of highly efficient and active photocatalysts.     

Cyclin D1 Gene Silencing Promotes IL‐1β‐Induced Apoptosis in Rat Chondrocytes

This study investigated the effects of cyclin D1 gene silencing on cell proliferation and apoptosis of interleukin‐1β (IL‐1β)‐induced osteoarthritis (OA) chondrocytes. Chondrocytes from healthy sprague‐dawley rats were divided into blank, OA model (chondrocytes underwent IL‐1β inducement), OA trial (chondrocytes underwent IL‐1β inducement with cyclin D1‐shRNA treatment), and negative control (NC; chondrocytes underwent IL‐1β inducement and control‐shRNA treatment) groups. Cell proliferation was assessed by CCK‐8 assay, and cell cycle and apoptosis by flow cytometry. qRT‐PCR and Western blotting were performed to detect cyclin D1 and apoptosis‐related factors expression levels. Chondrocyte proliferation increased after 72–96 h after incubation. The OA trial group exhibited reduced cell proliferation at 48, 72, and 96 h after treatment. The OA model, OA trial, and NC groups all contained more cells arrested in G1 phase and had higher apoptosis rates than the blank group. Additionally, the OA trial group contained more cells arrested in G1 phase, with increased apoptosis rates compared to the OA model and NC groups. The OA model group had lowest expression of cyclin D1 whereas the blank group contained the highest among the four groups. qRT‐PCR also showed that the OA model, OA trial, and NC groups all had increased expression levels of Bax and reduced expression levels of Bcl‐2 and P53 compared to the blank group, whereby by the OA group had the most significant change. The combined evidence in our study shows that cyclin D1 gene silencing suppresses proliferation and induces apoptosis of rat chondrocytes in IL‐1β‐induced OA. J. Cell. Biochem. 119: 290–299, 2018. © 2017 Wiley Periodicals, Inc.     

2‐D PAGE and MS analysis of proteins from formalin‐fixed,paraffin‐embedded tissues

In the past decade, encouraging results have been obtained in extraction and analysis of proteins from formalin‐fixed, paraffin‐embedded (FFPE) tissues. However, 2‐D PAGE protein maps with satisfactory proteomic information and comparability to fresh tissues have never been described to date. In the present study, we report 2‐D PAGE separation and MS identification of full‐length proteins extracted from FFPE skeletal muscle tissue. The 2‐D protein profiles obtained from FFPE tissues could be matched to those achieved from frozen tissues replicates. Up to 250 spots were clearly detected in 2‐D maps of proteins from FFPE tissue following standard mass‐compatible silver staining. Protein spots from both FFPE and frozen tissue 2‐D gels were excised, subjected to in situ hydrolysis, and identified by MS analysis. Matched spots produced matched protein identifications. Moreover, 2‐D protein maps from FFPE tissues were successfully subjected to Western immunoblotting, producing comparable results to fresh‐frozen tissues. In conclusion, this study provides evidence that, when adequately extracted, full‐length proteins from FFPE tissues might be suitable to 2‐D PAGE‐MS analysis, allowing differential proteomic studies on the vast existing archives of healthy and pathological‐fixed tissues.     

Ruddlesden–Popper 2D Component to Stabilize γ‐CsPbI3 Perovskite Phase for Stable and Efficient Photovoltaics

The highest certified power conversion efficiency (PCE) of black phase based CsPbI₃ perovskite solar cells has exceeded 18%, and become a hotspot in recent progress. However, the black phase of CsPbI₃ rapidly transforms to yellow phase in ambient conditions due to its thermodynamic instability. Here, a Ruddlesden–Popper 2D structure is introduced into γ‐CsPbI₃ film to stabilize the black phase via reducing dimensionality. It is found that a judicious amount of phenylethylammonium iodide can adjust the dimensionality of γ‐CsPbI₃ film from 2D to quasi‐2D and 3D phase. Comprehensive consideration to obtain both the stability and high PCE, quasi‐2D (n = 40) γ‐CsPbI₃ delivers a reproducible PCE of 13.65% with negligible hysteresis. By utilizing femtosecond transient absorption and time‐resolved PL decay, similar carrier kinetics in n = 40 and ∞ samples are observed, meaning an efficient charge extraction. More importantly, when the device is placed at 80 °C in N₂ condition or in air with RH of 25–30%, its PCE keeps ≈88% and ≈89% of its initial PCE after 12 days, respectively. Such results are better than the 3D one (≈69% and ≈16%, respectively).     

2‐D DIGE analysis implicates cytoskeletal abnormalities in psychiatric disease

The mechanisms underlying white matter changes in psychiatric disease are not known. We aimed to characterise the differential protein expression in deep white matter from the dorsolateral prefrontal cortex from 35 schizophrenia, 35 bipolar disorder, and 35 control subjects, from the Stanley Array Collection. We used 2‐D DIGE to profile for protein expression changes in the brain. We found 70 protein spots to be significantly differentially expressed between disease and control subjects (ANCOVA, p<0.05), 46 of which were subsequently identified by LC‐MS/MS. The proteins identified included novel disease candidates as well as proteins that have previously been reported as abnormal in schizophrenia, thus reinforcing their association with the disease. Furthermore, we confirmed the direction of change for three proteins using ELISA, namely neurofilament‐light, amphiphysin II, and Rab‐GDP‐α, in a subset of the Stanley Array Collection. In addition, altered expression of neurofilament‐light, amphiphysin II, and Rab‐GDP‐α was not observed in the cortex of mice chronically treated with haloperidol, making it less likely that these alterations are a consequence of neuroleptic medication. The data presented here strongly suggest disruption of the cytoskeleton and its associated signal transduction proteins in schizophrenia, and to a lesser extent in bipolar disorder.     

Record Open‐Circuit Voltage Wide‐Bandgap Perovskite Solar Cells Utilizing 2D/3D Perovskite Heterostructure

In this work, the authors realize stable and highly efficient wide‐bandgap perovskite solar cells that promise high power conversion efficiencies (PCE) and are likely to play a key role in next generation multi‐junction photovoltaics (PV). This work reports on wide‐bandgap (≈1.72 eV) perovskite solar cells exhibiting stable PCEs of up to 19.4% and a remarkably high open‐circuit voltage (V_OC) of 1.31 V. The V_OC‐to‐bandgap ratio is the highest reported for wide‐bandgap organic?inorganic hybrid perovskite solar cells and the V_OC also exceeds 90% of the theoretical maximum, defined by the Shockley–Queisser limit. This advance is based on creating a hybrid 2D/3D perovskite heterostructure. By spin coating n‐butylammonium bromide on the double‐cation perovskite absorber layer, a thin 2D Ruddlesden–Popper perovskite layer of intermediate phases is formed, which mitigates nonradiative recombination in the perovskite absorber layer. As a result, V_OC is enhanced by 80 mV.     

Characterization of [3H]LS‐3‐134, a novel arylamide phenylpiperazine D3 dopamine receptor selective radioligand

LS‐3‐134 is a substituted N‐phenylpiperazine derivative that has been reported to exhibit: (i) high‐affinity binding (K_i value 0.2 nM) at human D3 dopamine receptors, (ii) > 100‐fold D3 versus D2 dopamine receptor subtype binding selectivity, and (iii) low‐affinity binding (K_i > 5000 nM) at sigma 1 and sigma 2 receptors. Based upon a forskolin‐dependent activation of the adenylyl cyclase inhibition assay, LS‐3‐134 is a weak partial agonist at both D2 and D3 dopamine receptor subtypes (29% and 35% of full agonist activity, respectively). In this study, [³H]‐labeled LS‐3‐134 was prepared and evaluated to further characterize its use as a D3 dopamine receptor selective radioligand. Kinetic and equilibrium radioligand binding studies were performed. This radioligand rapidly reaches equilibrium (10–15 min at 37°C) and binds with high affinity to both human (K_d = 0.06 ± 0.01 nM) and rat (K_d = 0.2 ± 0.02 nM) D3 receptors expressed in HEK293 cells. Direct and competitive radioligand binding studies using rat caudate and nucleus accumbens tissue indicate that [³H]LS‐3‐134 selectively binds a homogeneous population of binding sites with a dopamine D3 receptor pharmacological profile. Based upon these studies, we propose that [³H]LS‐3‐134 represents a novel D3 dopamine receptor selective radioligand that can be used for studying the expression and regulation of the D3 dopamine receptor subtype.     

2-(3′-Hydroxypropylidene)-1α-hydroxy-19-norvitamin D compounds with truncated side chains

Our recent studies with 2-(3′-hydroxypropylidene) analogs of 1α,25-dihydroxy-19-norvitamin D₃ showed that this 2-substituent creates compounds with very potent biological activity. In the continuing search for vitamin D compounds with selective activity profiles, we prepared a series of 1α-hydroxy-19-norvitamin D analogs characterized by the presence of a 3′-hydroxypropylidene substituent at C-2 and a truncated side chain. These vitamin D compounds were efficiently prepared using convergent syntheses. The C,D-fragments, namely the Grundmann ketones 19, 20, 27, 36 and 37 were synthesized from the known 8β-benzoyloxy-22-aldehydes 12 and 29. These hydrindanones were subjected to Lythgoe type Wittig–Horner coupling with phosphine oxide 21, prepared by us previously, and after hydroxyl deprotection the set of 19-norvitamins 7–11 was successfully obtained. According to our expectations, all analogs (with an exception of the 20R-compound 7) have pronounced in vitro activity. When compared to the natural hormone 1α,25-(OH)₂D₃ (1), they show the same or only slightly reduced affinity for the vitamin D receptor while being similarly effective as 1 in differentiation of HL-60 cells into monocytes.