Cep70 contributes to angiogenesis by modulating microtubule rearrangement and stimulating cell polarization and migration

Centrosomal proteins intricately regulate diverse microtubule-mediated cellular activities, including cell polarization and migration. However, the direct participation of these proteins in angiogenesis, which involves vascular endothelial cell migration from preexisting blood vessels, remains elusive. Here we show that the centrosomal protein Cep70 is necessary for angiogenic response in mice. This protein is also required for tube formation and capillary sprouting in vitro from vascular endothelial cells. Wound healing and transwell assays reveal that Cep70 plays a significant role in endothelial cell migration. Depletion of Cep70 results in severe defects in membrane ruffling and centrosome reorientation, indicating a requirement for this protein in cell polarization. In addition, Cep70 is critically involved in microtubule rearrangement in response to the migratory stimulus. Our data further demonstrate that Cep70 is important for Cdc42 and Rac1 activation to promote angiogenesis. These findings thus establish Cep70 as a crucial regulator of the angiogenic process and emphasize the significance of microtubule rearrangement and cell polarization and migration in angiogenesis.     

The assembly of microtubule protein in vitro. The kinetic role in microtubule elongation of oligomeric fragments containing microtubule-associated proteins.

The kinetics of assembly were studied for bovine and pig microtubule protein in vitro over a range of conditions of pH, temperature, nucleotide and protein concentration. The kinetics are in general biphasic with two major processes of similar amplitude but separated in rate by one order of magnitude. Rates and amplitudes are complex functions of solution conditions. The rates of the fast phase and the slow phase attain limiting values as a function of increasing protein concentration, and are more stringently limited at pH 6.5 than pH 6.95. Such behaviour indicates that mechanisms other than the condensation polymerization of tubulin dimer become rate-limiting at higher protein concentration. The constancy of the wavelength-dependence of light-scattering and ultrastructural criteria indicate that microtubules of normal morphology are formed in both phases of the assembly process. Electrophoretic analysis of assembling microtubule protein shows that MAP- (microtubule-associated-protein-)rich microtubules are formed during the fast phase. The rate of dissociation of oligomeric species on dilution of microtubule protein closely parallels the fast-phase rate in magnitude and temperature-dependence. We propose that the rate of this process constitutes an upper limit to the rate of the fast phase of assembly. The kinetics of redistribution of MAPs from MAP-rich microtubules may be a factor limiting the slow-phase rate. A working model is derived for the self-assembly of microtubule protein incorporating the dissociation and redistribution mechanisms that impose upper limits to the rates of assembly attainable by bimolecular addition reactions. Key roles are assigned to MAP-containing fragments in both phases of microtubule elongation. Variations in kinetic behaviour with solution conditions are inferred to derive from the nature and properties of fragments formed from oligomeric species after the rapid temperature jump. The model accounts for the limiting rate behaviour and indicates experimental criteria to be applied in evaluating the relative contributions of alternative pathways.     

Nucleotide specificity in microtubule assembly in vitro

A procedure is described for removing most of the GDP bound at the exchangeable GTP binding site (E site) of tubulin. Microtubule protein containing substoichiometric amounts of GDP at the E site is found to polymerize in response to: (a) two nonhydrolyzable ATP analogues, adenylyl imidodiphosphate (AMP-PNP) and adenylyl beta, gamma-methylenediphosphonate (AMP-PCP); and (b) substoichiometric levels of GTP or dGTP. The results are interpreted as suggesting that: (1) when GDP is removed from tubulin, the E site shows broad specificity for nucleoside triphosphates: (2) microtubule assembly can be induced by the binding of substoichiometric amounts of nucleoside triphosphate to the E site.     

Protein kinase C activation promotes microtubule advance in neuronal growth cones by increasing average microtubule growth lifetimes

We describe a novel mechanism for protein kinase C regulation of axonal microtubule invasion of growth cones. Activation of PKC by phorbol esters resulted in a rapid, robust advance of distal microtubules (MTs) into the F-actin rich peripheral domain of growth cones, where they are normally excluded. In contrast, inhibition of PKC activity by bisindolylmaleimide and related compounds had no perceptible effect on growth cone motility, but completely blocked phorbol ester effects. Significantly, MT advance occurred despite continued retrograde F-actin flow-a process that normally inhibits MT advance. Polymer assembly was necessary for PKC-mediated MT advance since it was highly sensitive to a range of antagonists at concentrations that specifically interfere with microtubule dynamics. Biochemical evidence is presented that PKC activation promotes formation of a highly dynamic MT pool. Direct assessment of microtubule dynamics and translocation using the fluorescent speckle microscopy microtubule marking technique indicates PKC activation results in a nearly twofold increase in the typical lifetime of a MT growth episode, accompanied by a 1.7-fold increase and twofold decrease in rescue and catastrophe frequencies, respectively. No significant effects on instantaneous microtubule growth, shortening, or sliding rates (in either anterograde or retrograde directions) were observed. MTs also spent a greater percentage of time undergoing retrograde transport after PKC activation, despite overall MT advance. These results suggest that regulation of MT assembly by PKC may be an important factor in determining neurite outgrowth and regrowth rates and may play a role in other cellular processes dependent on directed MT advance.     

Inhibition of microtubule assembly in vitro by anti-tubulin monoclonal antibodies

Five monoclonal antibodies against N-terminal domains of alpha- or beta-tubulin were tested for their ability to interfere with the in vitro formation of microtubules. Although all the antibodies exhibited similar association constants for immobilized tubulin, they differed in their inhibitory effect on microtubule assembly. For the most potent antibody, TU-13, the antibody/tubulin molar ratio of about 1:320 was sufficient for a 50% inhibition. The data indicate that the surface regions of N-terminal domains of tubulin are involved in the formation of microtubules.     

Effect of gamma-irradiation on microtubule assembly in vitro

Microtubular protein was exposed to gamma-radiation from 500 to 1000 Gy, Within that dose range its polymerization ability was decreased by 20-60 per cent when samples were irradiated in assembled state, and by 40-75 per cent when irradiated in unassembled state. Microtubules assembled from irradiated subunits were shorter and of more uniform lengths than control microtubules. For the dose of 1000 Gy the mean length and its standard deviation were reduced to about one-half of the values of the control.     

The Ncd tail domain promotes microtubule assembly and stability

Non-claret disjunctional (Ncd) is a Drosophila kinesin-like motor required for spindle assembly and maintenance in oocytes and early embryos. Ncd has an ATP-independent microtubule binding site in the N-terminal tail domain as well as an ATP-dependent microtubule binding site in the C-terminal motor domain. The Ncd tail domain shares many properties with the microtubule-associated proteins that regulate microtubule assembly, including microtubule binding and bundling activity and an abundance of basic and proline residues. Given these similarities, we examined the ability of Ncd tail domain proteins to promote MT assembly and stability. The results indicate that the Ncd tail domain can promote MT assembly and stabilize MTs against conditions that induce MT disassembly, and suggest that Ncd may influence MT dynamics within the spindle.     

Cep70 and Cep131 contribute to ciliogenesis in zebrafish embryos

Background  

The centrosome is the cell's microtubule organising centre, an organelle with important roles in cell division, migration and polarity. However, cells can divide and flies can, for a large part of development, develop without them. Many centrosome proteins have been identified but the roles of most are still poorly understood. The centrioles of the centrosome are similar to the basal bodies of cilia, hair-like extensions of many cells that have important roles in cell signalling and development. In a number of human diseases, such Bardet-Biedl syndrome, centrosome/cilium proteins are mutated, leading to polycystic kidney disease, situs inversus, and neurological problems, amongst other symptoms.     

Parvulin 17 promotes microtubule assembly by its peptidyl-prolyl cis/trans isomerase activity

The parvulin-type peptidyl-prolyl cis/trans isomerases (PPIases) have been shown to be involved in tumor progression and the pathogenesis of Alzheimer's disease and were therefore a subject of intense research. Here, we describe a role for parvulin 17 in microtubule assembly. Co-precipitation experiments and sedimentation assays demonstrated that parvulin 17 interacts with tubulin in a GTP-dependent manner and thereby promotes the formation of microtubules, as shown by transmission electron microscopy and a microtubule polymerization assay. The microtubule-assembly-promoting properties of parvulin 17 seem to depend on its PPIase activity. Thus, catalytic deficient variants of parvulin 17 were not able to promote microtubule formation. Accordingly, inhibitors of parvulin 17 activity also prevent parvulin-catalyzed tubulin polymerization. The analysis of tubulin interaction sites on parvulin using peptide microarrays revealed that tubulin interacts with the substrate binding pocket of parvulin. Additionally, β-tubulin peptide scan on microarrays demonstrates interaction of parvulin 17 with an Arg-Pro-Asp motif corresponding to proline residue 87 of β-tubulin. Confocal laser scanning microscopy points to a function of parvulin 17 in microtubule dynamics as well. Parvulin 17 is predominantly found in the cytosol and colocalizes with microtubules.     

Ethacrynic acid inhibition of microtubule assembly in vitro.

Ethacrynic acid (ECA) is a sulfhydryl reactive diuretic drug. Recent studies show that ocular administration of ECA may have potential efficacy for treatment of glaucoma. ECA affects cell shape in cultured cells from the eye outflow pathway and the microtubule system is disrupted. We have studied the effect of ECA on microtubule protein (MTP) (tubulin and microtubule-associated proteins) and purified tubulin assembly. Fifty percent inhibition of MTP (1.8 mg/ml) assembly was found at 70 microM ECA in buffer and 410 microM ECA in 30% glycerol in buffer. If all sulfhydryl groups were attributed to tubulin, then approximately two sulfhydryls were blocked at 50% inhibition. Tubulin (2 mg/ml) assembly showed 50% inhibition at 175 microM ECA and approximately 2 sulfhydryl groups were lost. Increasing ECA preincubation times (0-60 min) with tubulin showed that the longer the preincubation time, the longer the lag time, and the slower the rate of assembly and that the percentage of inhibition was proportional to the ECA preincubation time. The number of blocked sulfhydryls also increased with preincubation time. Approximately two sulfhydryls were blocked at 50% inhibition of assembly. The critical concentration for assembly increased twofold when tubulin was preincubated with 0.1 mM ECA, suggesting a loss of active tubulin. Fifty percent inhibition of taxol-induced MTP and tubulin assembly occurred at 190 and 280 microM ECA, respectively, with 3.6 to 3.8 sulfhydryls blocked, respectively. Taxol protects microtubules from disassembly by ECA, suggesting that the ECA binding key sulfhydryls are blocked in the microtubule. These results suggest that ECA reacts slowly with tubulin and blocks sulfhydryl groups important for assembly. Microtubule-associated proteins and glycerol protect the sulfhydryls and so more ECA is necessary to inhibit assembly. Since the number of blocked sulfhydryls is greater at 50% inhibition for taxol-induced microtubules, sulfhydryl blocked tubulin incompetent to assemble under normal conditions may be induced to do so with taxol.     

A thermodynamic model for force integration and microtubule assembly during axonal elongation

We present here a thermodynamic model for tension and compression forces within axons (neurites) of the specific neural-cell line, PC 12, which seems generally applicable to neuronal growth. We suggest that these forces play a crucial role in microtubule assembly during axonal elongation. The Gibbs free energy change for the axonal elongation phase of neuronal growth is modeled as the sum of the extensional work for pulling on a random actin network, work of assembly for compressed microtubules and surface energy terms. This model explains the results of previously published experiments concerning axonal stability and microtubule polymerization and has been used to predict other phenomena.     

Nucleotide binding and phosphorylation in microtubule assembly in vitro.

Two non-hydrolyzable analogs of GTP, guanylyl-β,γ-methylene diphosphonate and guanylyl imidodiphosphate, have been found to induce rapid and efficient microtubule assembly in vitro by binding at the exchangeable site (E-site) on tubulin. Characterization of microtubule polymerization by several criteria, including polymerization kinetics, nucleotide binding to depolymerized and polymerized microtubules, and microtubule stability, reveals strong similarities between microtubule assembly induced by GTP and non-hydrolyzable GTP analogs. Nucleoside triphosphates which bind weakly or not at all to tubulin, such as ATP, UTP and CTP, are shown to induce microtubule assembly by means of a nucleoside diphosphate kinase (NDP-kinase, EC 2.7.4.6.) activity which is not intrinsic to tubulin. The NDP-kinase mediates microtubule polymerization by phosphorylating tubulin-bound GDP in situ at the E-site. Although hydrolysis of exchangeably bound GTP occurs, it is found to be uncoupled from the polymerization reaction. The non-exchangeable nucleotide binding site on tubulin (N-site) is not directly involved in microtubule assembly in vitro. The N-site is shown to contain almost exclusively GTP which is not hydrolyzed during microtubule assembly. A scheme is presented in which GTP acts as an allosteric effector at the E-site during microtubule assembly in vitro.     

Erythrocyte microtubule assembly in vitro. Tubulin oligomers limit the rate of microtubule self-assembly

Chicken erythrocyte tubulin containing a unique beta tubulin variant polymerizes with greater efficiency (lower critical concentration) but at a slower rate than chicken brain tubulin. In a previous study we demonstrated that the low net rate of assembly is partly due to the presence of large oligomers and rings which reduce the initial rate of subunit elongation on microtubule seeds (Murphy, D.B., and Wallis, K.T. (1985) J. Biol. Chem. 260, 12293-12301). In this study we show that erythrocyte tubulin oligomers also retard the rate of microtubule nucleation and the net rate of self-assembly. The inhibitory effect is most likely to be due to the increased stability of erythrocyte tubulin oligomers, including a novel polymer of coiled rings that forms during the rapid phase of microtubule polymerization. The slow rate of dissociation of rings and coils into dimers and small oligomers appears to limit both the nucleation and elongation steps in the self-assembly of erythrocyte microtubules.     

Cyclin G-associated kinase promotes microtubule outgrowth from chromosomes during spindle assembly

During mitosis, all chromosomes must attach to microtubules of the mitotic spindle to ensure correct chromosome segregation. Microtubule attachment occurs at specialized structures at the centromeric region of chromosomes, called kinetochores. These kinetochores can generate microtubule attachments through capture of centrosome-derived microtubules, but in addition, they can generate microtubules themselves, which are subsequently integrated with centrosome-derived microtubules to form the mitotic spindle. Here, we have performed a large scale RNAi screen and identify cyclin G-associated kinase (GAK) as a novel regulator of microtubule generation at kinetochores/chromatin. This function of GAK requires its C-terminal J-domain, which is essential for clathrin recycling from endocytic vesicles. Consistently, cells lacking GAK show strongly reduced levels of clathrin on the mitotic spindle, and reduction of clathrin levels also inhibits microtubule generation at kinetochores/chromosomes. Finally, we present evidence that association of clathrin with the spindle is promoted by a signal coming from the chromosomes. These results identify a role for GAK and clathrin in microtubule outgrowth from kinetochores/chromosomes and suggest that GAK acts through clathrin to control microtubule outgrowth around chromosomes.     

Double and single exponential kinetics of microtubule assembly in vitro

The kinetics of the microtubule protein assembly were studied in Mes buffer, pH 6.6, at 28 degrees C. The assembly under above conditions follow a kinetic expression containing two exponential terms. The observed two rate constants depend on protein concentration, and are on the order of 10(-2) sec-1 and 10(-3) sec-1. When CaCl2 is added to the system in low concentration, the kinetic expression becomes single exponential. The observed rate constant is independent of protein concentration and its value is 5 X 10(-3) sec-1. It is concluded that the double exponential kinetics correspond to favorable assembly conditions, probably to a high extent of nucleation, whereas the single exponential kinetics correspond to favorable assembly conditions, probably to a high extent of nucleation, whereas the single exponential kinetics is a slower process which occur under hindered assembly conditions.     

In vitro microtubule assembly on centrioles from mammalian spermatids

In the present study we have shown that the centriolar structures, which form the neck region of the spermatid tail, can act as microtubule-organizing centers.     

Structure-activity study of cytotoxicity and microtubule assembly in vitro by taxol and related taxanes

Fractionation of bovine brain cytosol by DEAE cellulose chromatography revealed the presence of a calcium-dependent protein kinase. This soluble neuronal protein kinase selectively phosphorylated several endogenous substrates. The most prominent substrate was a polypeptide with an apparent M_r of 45,000 which was stimulated 20-fold by addition of both calcium and calmodulin. Activation was dose-dependent, with half-maximal phosphorylation occurring at 0.9 μM free Ca²⁺ and 60nM calmodulin. The effect of calmodulin was competitively inhibited by a variety of calmodulin inhibitors, in a manner characteristic of most calmodulin-dependent enzymes. This calcium- and calmodulin-dependent protein kinase is distinct from any previously described protein kinase.