Enhanced molecular recognition signal in allosteric biosensing by proper substrate selection

Among protein biosensors, those based on enzymatic responses to specific analytes offer convenient instruments for fast and ultra-fast molecular diagnosis, through the comparative analysis of the product formed in presence and in absence of the effector. We have explored here the performance of five beta-galactosidase substrates during the activation of a beta-galactosidase sensor by antibodies against the human immunodeficiency virus (HIV). Interestingly, the employed substrate determines the dynamic range of the allosteric signal and significantly influences the sensitivity of the senso-enzymatic reaction. While ortho-nitrophenyl beta-D-galactopyranoside allows the detection of a model anti-gp41 monoclonal antibody below 0.024 ng/microL, phenol red beta-D-galactopyranoside offers the most dynamic response with signal/background ratios higher than 12-fold and a detection limit around 0.071 ng/microL. The hydrolysis of both chromogenic substrates generates linear sensing responses to immune human sera and parallel time-course topologies of the allosteric reaction. Therefore, the obtained results stress the potential of chromogenic substrates versus those rendering quimioluminescent, amperometric, or fluorescent signals, for the further automatization, miniaturization, or adaptation of beta-galactosidase-based biosensing to high-throughput applications.     

Direct selection of RNA beacon aptamers

A method for the direct selection of RNA molecules that can be easily converted into beacon aptamers is presented. Beacon aptamers are fluorescently labeled nucleic acids that signal the presence of a specific ligand through changes in fluorescence intensity. Typically, ligand binding causes an increase in fluorescence intensity by inducing a conformational change that separates a fluorophore/quencher pair. The method presented here simultaneously selects for ligand binding and induction of an appropriate conformational change. The method was tested by selecting RNA molecules that can detect the aminoglycoside antibiotic tobramycin. After 14 rounds of selection, two sequence families emerged. Upon conversion into beacon aptamers, representatives of the two selected sequence families specifically detected tobramycin, while a negative control RNA that did not survive the selection protocol did not function as a tobramycin beacon aptamer.     

In silico selection of RNA aptamers

In vitro selection of RNA aptamers that bind to a specific ligand usually begins with a random pool of RNA sequences. We propose a computational approach for designing a starting pool of RNA sequences for the selection of RNA aptamers for specific analyte binding. Our approach consists of three steps: (i) selection of RNA sequences based on their secondary structure, (ii) generating a library of three-dimensional (3D) structures of RNA molecules and (iii) high-throughput virtual screening of this library to select aptamers with binding affinity to a desired small molecule. We developed a set of criteria that allows one to select a sequence with potential binding affinity from a pool of random sequences and developed a protocol for RNA 3D structure prediction. As verification, we tested the performance of in silico selection on a set of six known aptamer–ligand complexes. The structures of the native sequences for the ligands in the testing set were among the top 5% of the selected structures. The proposed approach reduces the RNA sequences search space by four to five orders of magnitude—significantly accelerating the experimental screening and selection of high-affinity aptamers.     

Structural basis for recognition of Co2+ by RNA aptamers

Co(2+) binding RNA aptamers were chosen as research models to reveal the structural basis underlying the recognition of Co(2+) by RNA, with the application of two distinct methods. Using the nucleotide analog interference mapping assay, we found strong interference effects after incorporation of the 7-deaza guanosine phosphorotioate analog into the RNA chain at equivalent positions G27 and G28 in aptamer no. 18 and G25 and G26 in aptamer no. 20. The results obtained by nucleotide analog interference mapping suggest that these guanine bases are crucial for the creation of Co(2+) binding sites and that they appear to be involved in the coordination of the ion to the exposed N7 atom of the tandem guanines. Additionally, most 7-deaza guanosine phosphorotioate and 7-deaza adenosine phosphorotioate interferences were located in the common motifs: loop E-like in aptamer no. 18 and kissing dimer in aptamer no. 20. We also found that purine-rich stretches containing guanines with the highest interference values were the targets for hybridization of 6-mers, which are members of the semi-random oligodeoxyribonucleotide library in both aptamers. It transpired that DNA oligomer directed RNase H digestions are sensitive to Co(2+) and, at an elevated metal ion concentration, the hybridization of oligomers to aptamer targets is inhibited, probably due to higher stability and complexity of the RNA structure.     

The selection of aptamers specific for membrane molecular targets

A growing number of RNA aptamers have been selected experimentally using the SELEX combinatorial approach, and these aptamers have several advantages over monoclonal protein antibodies or peptides with respect to their applications in medicine and nanobiotechnology. Relatively few successful selections have been reported for membrane molecular targets, in contrast to the situation with non-membrane molecular targets. This review compares the procedures and techniques used in selections against membrane proteins and membrane lipids. In the case of membrane proteins, the selections were performed against soluble protein fragments, detergent-membrane protein mixed micelles, whole cells, vesicles derived from cellular membranes, and enveloped viruses. Liposomes were used as an experimental system for the selection of aptamers against membrane lipids. RNA structure-dependent aptamer binding for rafts in lipid vesicles was reported. Based on the selected aptamers against DOPC and the amino acid tryptophan, a specific passive membrane transporter composed of RNA was constructed. The determination of the selectivity of aptamers appears to be a crucial step in a selection, but has rarely been fully investigated. The selections, which use whole cells or vesicles derived from membranes, can yield aptamers not only against proteins but also against membrane lipids.     

The tyranny of adenosine recognition among RNA aptamers to coenzyme A

Background  

Understanding the diversity of interactions between RNA aptamers and nucleotide cofactors promises both to facilitate the design of new RNA enzymes that utilize these cofactors and to constrain models of RNA World evolution. In previous work, we isolated six pools of high affinity RNA aptamers to coenzyme A (CoA), the principle cofactor in biological acyltransfer reactions. Interpretation of the evolutionary significance of those results was made difficult by the fact that the affinity resin attachment strongly influenced the outcome of those selections. Here we describe the selection of four new pools isolated on a disulfide-linked CoA affinity matrix to minimize context-dependent recognition imposed by the attachment to the solid support.     

In vitro selection of RNA aptamers that block CCL1 chemokine function

CCL1, the CCR8 ligand, is a CC chemokine secreted by activated monocytes and lymphocytes and is a potent chemoattractant for these cell types. The in vivo role of the CCL1/CCR8 axis in Th2-mediated inflammation is far from clear. Ligand neutralisation studies reported discrepancies in the effect of CCL1/CCR8 and CCR8 knockout studies showed very different insights into the functional role of the CCR8. To further study the biological function of CCL1, we focused on the generation and characterisation of RNA aptamers. We report here the in vitro isolation of the first nuclease resistant and selective RNA aptamer (T48) with high-binding affinity for human and mouse CCL1. The T48 aptamer but not a random control aptamer antagonises CCL1 function in a dose-dependent fashion in both heparin binding and chemotaxis assays. To our knowledge, the T48 aptamer constitutes one of the most potent CCL1 antagonists reported to date and is an excellent tool to dissect CCL1-specific function in vivo. The T48 aptamer may also have potential as new generation of therapeutic tools.     

In vitro selection and characterization of cellulose-binding RNA aptamers using isothermal amplification

We sought to create new cellulose-binding RNA aptamers for use as modular components in the engineering of complex functional nucleic acids. We designed our in vitro selection strategy to incorporate self-sustained sequence replication (3SR), which is an isothermal nucleic acid amplification protocol that allows for the rapid amplification of RNAs with little manipulation. The best performing aptamer representative was chosen for reselection and further optimization. The aptamer exhibits robust binding of cellulose in both the powdered and paper form, but did not show any significant binding of closely related polysaccharides. The minimal cellulose-binding RNA aptamer also can be grafted onto other RNAs to permit the isolation of RNAs from complex biochemical mixtures via cellulose affinity chromatography. This was demonstrated by fusing the aptamer to a glmS ribozyme sequence, and selectively eluting ribozyme cleavage products from cellulose using glucosamine 6-phosphate to activate glmS ribozyme function.     

In vitro selection of RNA aptamers that selectively bind danofloxacin

Danofloxacin is a synthetic fluoroquinolone with broad spectrum antibacterial activity that is used for the treatment of respiratory diseases in animal husbandry. However, danofloxacin has many adverse reactions and is toxic to humans. Especially, it detrimentally affects muscle, central nerve system, peripheral nerve system, liver, and skin in those who ingest foods in which danofloxacin has accumulated. Prescreening and determination of the level of danofloxacin in foods or food products is necessary for human health. Aptamers are composing of oligonucleotides that specifically interact with target molecules. They are emerging as detection/diagnostic ligands. Here, we used the SELEX in vitro selection technology to identify specific and high-affinity RNA aptamers with 2′-fluoro-2′-deoxyribonucleotide modified pyrimidine nucleotides against danofloxacin. Selected RNA aptamers bound specifically to danofloxacin, but not to tetracycline. Truncation of RNA aptamer up to 36 mer did not comprise specificity and affinity. The truncated RNA aptamer specifically bound to target chemical, allowing the discrimination of danofloxacin from other fluoroquinolones. The isolated specific aptamer could be a potential agent used for the rapid and cost-effective detection and sensing of danofloxacin, replacing instrumental methods including the more expensive and time-consuming methods of high performance liquid chromatography and liquid chromatography/mass spectrometry.     

In vitro selection of RNA aptamers against a composite small molecule-protein surface

A particularly challenging problem in chemical biology entails developing systems for modulating the activity of RNA using small molecules. One promising new approach towards this problem exploits the phenomenon of ‘surface borrowing,’ in which the small molecule is presented to the RNA in complex with a protein, thereby expanding the overall surface area available for interaction with RNA. To extend the utility of surface borrowing to include potential applications in synthetic biology, we set out to create an ‘orthogonal’ RNA-targeting system, one in which all components are foreign to the cell. Here we report the identification of small RNA modules selected in vitro to bind a surface-engineered protein, but only when the two macromolecules are bound to a synthetic bifunctional small molecule.     

Molecular recognition of amino acids by RNA aptamers: the evolution into an L-tyrosine binder of a dopamine-binding RNA motif

We report the evolution of an RNA aptamer to change its binding specificity. RNA aptamers that bind the free amino acid tyrosine were in vitro selected from a degenerate pool derived from a previously selected dopamine aptamer. Three independent sequences bind tyrosine in solution, the winner of the selection binding with a dissociation constant of 35 microM. Competitive affinity chromatography with tyrosine-related ligands indicated that the selected aptamers are highly L-stereo selective and also recognize L-tryptophan and L-dopa with similar affinity. The binding site was localized by sequence comparison, analysis of minimal boundaries, and structural probing upon ligand binding. Tyrosine-binding sites are characterized by the presence of both tyrosine (UAU and UAC) and termination (UAG and UAA) triplets.     

Study of the molecular recognition of aptamers selected through ovarian cancer cell-SELEX

Background

Ovarian cancer is the most lethal gynecological malignancy, and the ovarian clear cell carcinoma subtype (OCCA) demonstrates a particularly poor response to standard treatment. Improvements in ovarian cancer outcomes, especially for OCCA, could be expected from a clearer understanding of the molecular pathology that might guide strategies for earlier diagnosis and more effective treatment.

Methodology/Principal Findings

Cell-SELEX technology was employed to develop new molecular probes for ovarian cancer cell surface markers. A total of thirteen aptamers with K_d''s to ovarian cancer cells in the pico- to nanomolar range were obtained. Preliminary investigation of the targets of these aptamers and their binding characteristics was also performed.

Conclusions/Significance

We have selected a series of aptamers that bind to different types of ovarian cancer, but not cervical cancer. Though binding to other cancer cell lines was observed, these aptamers could lead to identification of biomarkers that are related to cancer.     

In vitro selection of specific RNA aptamers for the NFAT DNA binding domain

Nuclear factor of activated T cells (NFAT) plays a central role in the immune response, and the immuno-suppressive drugs, cyclosporin A and FK-506, have been developed to inhibit it. However, due to the toxic effects of these drugs, which derive from their ability to inhibit calcineurin in non-immune tissues, the identification of small compounds that target NFAT directly could be an approach to developing less toxic immunosuppressive therapy. Using an in vitro selection technology termed SELEX on a combinatorial RNA library with 40 nucleotide-long random sequences, we have isolated two RNA aptamers to the NFAT DNA binding domain (DBD). Gel retardation assays and surface plasmon resonance measurements showed that the aptamers have a specific and high affinity (apparent KD~10 to 100 nM) for the NFAT DBD. Enzymatic probing analysis showed that the two RNA aptamers have similar structures and share a sequence that forms an apical loop. Moreover, RNase footprinting analysis showed that the shared sequence (GATATGAAGGA/ TGTG/AGAGAG) is critical for binding to both NFATp DBD and NFATc DBD. These results suggest that short RNAs identified in this study is a specific aptamer to NFAT DBD, and hence could be applied not only for the delineation of NFAT functions but for the development of potent immune modulating lead compounds.     

In vitro selection of DNA aptamers against the HIV-1 TAR RNA hairpin

In vitro selection was performed to identify DNA aptamers against the TAR RNA stem-loop structure of HIV-1. A counterselection step allowed the elimination of kissing complex-forming aptamers previously selected (Boiziau et al. J. Biol. Chem. 1999; 274:12730). This led to the emergence of oligonucleotides, most of which contained two consensus sequences, one targeted to the stem 3'-strand (5'-CCCTAGTTA) and the other complementary to the TAR apical loop (5'-CTCCC). The best aptamer could be shortened to a 19-mer oligonucleotide, characterized by a dissociation constant of 50 nM. A 16-mer oligonucleotide complementary to the TAR stem 3'-strand could also be derived from the identified aptamers, with an equal affinity (Kd = 50 nM). Experiments performed to elucidate the interaction between TAR and the aptamers (UV melting measures, enzymatic and chemical footprints) demonstrated that the TAR stem 5'-strand was not simply displaced as a result of the complex formation but unexpectedly remained associated on contact with the antisense oligonucleotide. We suggest that a multistranded structure could be formed.     

In vitro selection of RNA aptamers against the HCV NS3 helicase domain

Nonstructural protein 3 (NS3) of hepatitis C virus (HCV) has two distinct domains, protease and helicase, that are essential for HCV proliferation. Therefore, NS3 is considered a target for anti-HCV treatment. To study RNA aptamers of the NS3 helicase domain, we carried out in vitro selection against the HCV NS3 helicase domain. RNA aptamers obtained after eight generations possessed 5' extended single-stranded regions and the conserved sequence (5'-GGA(U/C)GGAGCC-3') at stem-loop regions. Aptamer 5 showed strong inhibition of helicase activity in vitro. Deletion and mutagenesis analysis clarified that the conserved stem-loop is important and that the whole structure is needed for helicase inhibition. We compared the inhibition of helicase activity between aptamer 5 and 3'+-UTR of HCV.     

Automated selection of anti-protein aptamers

The in vitro selection of nucleic acid binding species (aptamers) is frequently repetitive, time-consuming, and poorly adapted to high-throughput applications. We have adapted automated workstations to select anti-protein aptamers; as an example, we demonstrated the selection of anti-lysozyme aptamers that function as efficient inhibitors of cell lysis. The increases in throughput brought about by automation should potentiate the application of aptamer technology to the rapidly growing field of proteomics.     

In vitro selection of signaling aptamers

Reagentless biosensors that can directly transduce molecular recognition to optical signals should potentiate the development of sensor arrays for a wide variety of analytes. Nucleic acid aptamers that bind ligands tightly and specifically can be readily selected, but may prove difficult to adapt to biosensor applications. We have therefore attempted to develop selection methods that couple the broad molecular recognition properties of aptamers with signal transduction. Anti-adenosine aptamers were selected from a pool that was skewed to contain very few fluoresceinated uridines. The primary family of aptamers showed a doubling of relative fluorescence intensity at saturating concentrations of a cognate analyte, ATP, and could sense ATP concentrations as low as 25 microM. A single uridine was present in the best signaling aptamer. Surprisingly, other dyes could substitute for fluorescein and still specifically signal the presence of ATP, indicating that the single uridine functioned as a general "switch" for transducing molecular recognition to optical signals.