Cloning of a gene from Bacillus cereus with homology to the mreB gene from Escherichia coli.

We have cloned and sequenced a gene coding for a putative shape-determining protein (MreB) highly homologous to the mreB gene product of Escherichia coli. The amino acid (aa) identity was 53% and the similarity 72%. The gene is expressed early in the logarithmic phase. The aa sequence comparison showed that the protein, like the E. coli MreB, has structural similarity to actin and heat-shock protein Hsc70 encoded by a new super-gene family.     

Esterases from Bacillus subtilis and B. stearothermophilus share high sequence homology but differ substantially in their properties

A novel esterase from Bacillus subtilis (BsubE) was cloned, functionally expressed in Escherichia coli and biochemically characterized. BsubE shows high homology (74% identity, >95% homology) to an esterase from the thermophilic B. stearothermophilus (BsteE). Both enzymes were efficiently expressed in E. coli, using a L-rhamnose-expression system [11,500 units/l (BsteE), 3,400 units/l (BsubE)] and were purified by Ni-nitrilotriacetic acid chromatography, yielding specific activities of 70 units/mg (BsteE) and 40 units/mg (BsubE), as determined by the hydrolysis of p-nitrophenyl acetate. Despite the high homology, both esterases revealed remarkable differences in their properties. As expected, the esterase from the thermophilic organism showed significantly higher temperature stability. Whereas BsteE showed highest activity at 65-70 degrees C, BsubE was almost inactivated at 50 degrees C. Moreover, both enzymes showed quite different substrate patterns in the hydrolysis of various esters. Whilst the B. subtilis esterase accepted esters with a branched alcohol moiety well, the B. stearothermophilus esterase was more useful in the hydrolysis of substrates with a sterically demanding carboxylic acid group. BsteE showed excellent enantioselectivity ( E>100) in the kinetic resolution of menthyl acetate and even accepted the bulky menthyl benzoate as substrate ( E=19). In contrast, BsubE converted 1-phenethylacetate with higher selectivity ( E>150 vs E=8).     

A neutral proteinase produced by Bacillus cereus with high sequence homology to thermolysin: Production,isolation and characterization

Summary Extracellular neutral proteinase was produced in 10 l and 240 l batch cultivations of Bacillus isolate X-3, identified as B. cereus and deposited as DSM 3101. The enzyme concentration was about 37–47 mg/l in the fermentation broth. The enzyme was extracted from the medium by adsorption chromatography with Amberlite XAD-7-resin, and further purified by acetone precipitation and affinity chromatography. The mol. wt. is 35 000 Da. The enzyme is thermostabilized by calcium, inhibited by EDTA and o-phenanthrolin and has its pH-optimum at pH 6.8. The specific activity is 4.36·10^-4 kat·mg^-1 at 35°C and the k _cat/K _m on FAGLA (furylacryloyl-glyleu-NH₂) is 2.25·10⁴ M^-1 s^-1 at 30°C, pH 6.8. The proteinase is stable up to 60°C. The N-terminal amino acid sequence exhibits a high sequence homology (63%) to thermolysin and a low homology (18%) to B. subtilis neutral protease A. The enzyme may therefore be suitable for structural comparison with thermolysin in order to study factors affecting thermostability.     

C-terminal domains of Listeria monocytogenes bacteriophage murein hydrolases determine specific recognition and high-affinity binding to bacterial cell wall carbohydrates

Listeria monocytogenes phage endolysins Ply118 and Ply500 share a unique enzymatic activity and specifically hydrolyse Listeria cells at the completion of virus multiplication in order to release progeny phage. With the aim of determining the molecular basis for the lytic specificity of these enzymes, we have elucidated their domain structure and examined the function of their unrelated and unique C-terminal cell wall binding domains (CBDs). Analysis of deletion mutants showed that both domains are needed for lytic activity. Fusions of CBDs with green fluorescent protein (GFP) demonstrated that the C-terminal 140 amino acids of Ply500 and the C-terminal 182 residues of Ply118 are necessary and sufficient to direct the murein hydrolases to the bacterial cell wall. CBD500 was able to target GFP to the surface of Listeria cells belonging to serovar groups 4, 5 and 6, resulting in an even staining of the entire cell surface. In contrast, the CBD118 hybrid bound to a ligand predominantly present at septal regions and cell poles, but only on cells of serovars 1/2, 3 and 7. Non-covalent binding to surface carbohydrate ligands occurred in a rapid, saturation-dependent manner. We measured 4 x 104 and 8 x 104 binding sites for CBD118 and CBD500 respectively. Surface plasmon resonance analysis revealed unexpected high molecular affinity constants for the CBD-ligand interactions, corresponding to nanomolar affinities. In conclusion, we show that the CBDs are responsible for targeting the phage endolysins to their substrates and function to confer recognition specificity on the proteins. As the CBD sequences contain no repeats and lack all known sequence motifs for anchoring of proteins to the bacterial cell, we conclude that they use unique structural motifs for specific association with the surface of Gram-positive bacteria.     

Evaluation of different methods to discriminate Bacillus anthracis from other bacteria of the Bacillus cereus group

Aims:  To evaluate different methods that are useful for rapid and definitive discrimination of Bacillus anthracis from other bacteria of the Bacillus cereus group in environmental samples like letters claimed to contain anthrax spores.
Methods and Results:  Characterized strains and bacteria from environmental samples were analysed by microbiological and molecular methods (PCR and restriction analysis). Environmental isolates often shared several microbiological features with B. anthracis , e.g. lack of β -haemolysis and phospholipase C activity, and only the gamma phage assay was specific for B. anthracis . PCR assays targeting markers from the virulence plasmids exclusively detected B. anthracis , but other PCR targets were also detected in nonanthrax isolates. Additionally, the restriction pattern in an Alu I restriction analysis of the SG-749 fragment is not 100% specific. The loci used for multiple-locus variable-number tandem repeat analysis of B. anthracis are also present in other members of the B. cereus group, but amplicon sizes are usually different.
Conclusions:  Environmental samples often contain borderline isolates closely related to B. anthracis both on microbiological and genetic levels. Real-time PCR targeting plasmidal and chromosomal markers should be used for rapid and definitive exclusion of a virulent strain of B. anthracis in such samples.
Significance and Impact of the Study:  This study gives an overview of the current microbiological and molecular methods used for identification of B. anthracis and shows that most assays have limits when borderline isolates present in environmental samples are analysed.     

Structural elucidation of the nonclassical secondary cell wall polysaccharide from Bacillus cereus ATCC 10987. Comparison with the polysaccharides from Bacillus anthracis and B. cereus type strain ATCC 14579 reveals both unique and common structural features

Nonclassical secondary cell wall polysaccharides constitute a major cell wall structure in the Bacillus cereus group of bacteria. The structure of the secondary cell wall polysaccharide from Bacillus cereus ATCC 10987, a strain that is closely related to Bacillus anthracis, was determined. This polysaccharide was released from the cell wall with aqueous hydrogen fluoride (HF) and purified by gel filtration chromatography. The purified polysaccharide, HF-PS, was characterized by glycosyl composition and linkage analyses, mass spectrometry, and one- and two-dimensional NMR analysis. The results showed that the B. cereus ATCC 10987 HF-PS has a repeating oligosaccharide consisting of a -->6)-alpha-GalNAc-(1-->4)-beta-ManNAc-(1-->4)-beta-GlcNAc-(1--> trisaccharide that is substituted with beta-Gal at O3 of the alpha-GalNAc residue and nonstoichiometrically acetylated at O3 of the N-acetylmannosamine (ManNAc) residue. Comparison of this structure with that of the B. anthracis HF-PS and with structural data obtained for the HF-PS from B. cereus type strain ATCC 14579 revealed that each HF-PS had the same general structural theme consisting of three HexNAc and one Hex residues. A common structural feature in the HF-PSs from B. cereus ATCC 10987 and B. anthracis was the presence of a repeating unit consisting of a HexNAc(3) trisaccharide backbone in which two of the three HexNAc residues are GlcNAc and ManNAc and the third can be either GlcNAc or GalNAc. The implications of these results with regard to the possible functions of the HF-PSs are discussed.     

Two different aa3-type cytochromes can be purified from the bacterium Bacillus cereus.

Two aa3-type cytochromes were purified from membranes of sporulating Bacillus cereus. One of them, an aa3 complex, was found to be composed of two subunits (51 and 31 kDa), two a hemes and three copper atoms, thus being similar to the cytochrome aa3 previously purified from vegetative B. cereus [García-Horsman, J. A., Barquera, B., González-Halphen, D. & Escamilla, J. E. (1991) Mol. Microbiol. 5, 197-205]. The second isoform, a caa3 complex, was expressed in sporulating cells only, and was found to be composed of two subunits (51 and 37 kDa). The 37-kDa subunit (subunit II) is a heme-c-containing polypeptide as shown by its peroxidase activity in SDS/PAGE gels and by its spectral features. Both subunits of the caa3 complex immunologically cross-reacted with antiserum raised against B. cereus cytochrome aa3, suggesting homology between the two enzymes. Also, the heme-c-containing subunit of the caa3 complex was reactive with anti-(bovine cytochrome c) antiserum, but not with anti-(bovine cytochrome c1) antiserum. In addition to one heme c and two hemes a, the caa3 complex contained three copper atoms. Kinetic comparison of aa3 and caa3 complexes revealed that the latter is slightly more active (k = 150 s-1) and has a lower affinity to yeast cytochrome c (Km = 76 microM) and to oxygen (Km = 2 microM) as compared with cytochrome aa3 (100 s-1, 10 microM, and 5 microM, respectively).     

The three S-layer-like homology motifs of the S-layer protein SbpA of Bacillus sphaericus CCM 2177 are not sufficient for binding to the pyruvylated secondary cell wall polymer

The S-layer protein SbpA of Bacillus sphaericus CCM 2177 recognizes a pyruvylated secondary cell wall polymer (SCWP) as anchoring structure to the peptidoglycan-containing layer. Data analysis from surface plasmon resonance (SPR) spectroscopy revealed the existence of three different binding sites with high, medium and low affinity for rSbpA on SCWP immobilized to the sensor chip. The shortest C-terminal truncation with specific affinity to SCWP was rSbpA(31-318). Surprisingly, rSbpA(31-202) comprising the three S-layer-like homology (SLH) motifs did not bind at all. Analysis of the SbpA sequence revealed a 58-amino-acid-long SLH-like motif starting 11 amino acids after the third SLH motif. The importance of this motif for reconstituting the functional SCWP-binding domain was further demonstrated by construction of a chimaeric protein consisting of the SLH domain of SbsB, the S-layer protein of Geobacillus stearothermophilus PV72/p2 and the C-terminal part of SbpA. In contrast to SbsB or its SLH domain which did not recognize SCWP of B. sphaericus CCM 2177 as binding site, the chimaeric protein showed specific affinity. Deletion of 213 C-terminal amino acids of SbpA had no impact on the square (p4) lattice structure, whereas deletion of 350 amino acids was linked to a change in lattice type from square to oblique (p1).     

Two additional carbohydrate-binding sites of beta-amylase from Bacillus cereus var. mycoides are involved in hydrolysis and raw starch-binding

In the previous X-ray crystallographic study, it was found that beta-amylase from Bacillus cereus var. mycoides has three carbohydrate-binding sites aside from the active site: two (Site2 and Site3) in domain B and one (Site1) in domain C. To investigate the roles of these sites in the catalytic reaction and raw starch-binding, Site1 and Site2 were mutated. From analyses of the raw starch-binding of wild-type and mutant enzymes, it was found that Site1 contributes to the binding affinity to raw-starch more than Site2, and that the binding capacity is maintained when either Site1 or Site2 exists. The raw starch-digesting ability of this enzyme was poor. From inhibition studies by maltitol, GGX and alpha-CD for hydrolyses of maltopentaose (G5) and amylose ( (n) = 16) catalyzed by wild-type and mutant enzymes, it was found that alpha-CD is a competitive inhibitor, while, maltitol behaves as a mixed-type or competitive inhibitor depending on the chain length of the substrate and the mutant enzyme. From the analysis of the inhibition mechanism, we conclude that the bindings of maltitol and GGX to Site2 in domain B form an abortive ESI complex when amylose ( (n) = 16) is used as a substrate.     

Mechanism of silicate binding to the bacterial cell wall in Bacillus subtilis.

To investigate the chemical mechanism of silicate binding to the surface of Bacillus subtilis, we chemically modified cell wall carboxylates to reverse their charge by the addition of an ethylenediamine ligand. For up to 9 weeks, mixtures of Si, Al-Fe-Si, and Al-Fe-Si plus toxic heavy metals were reacted with these cells for comparison with control cells and abiotic solutions. In general, more Si and less metal were bound to the chemically modified surfaces, thereby showing the importance of an electropositive charge in cell walls for fine-grain silicate mineral development. The predominant reaction for this development was the initial silicate-to-amine complexation in the peptidoglycan of ethylenediamine-modified and control cell walls, although metal ion bridging between electronegative sites and silicate had an additive effect. The binding of silicate to these bacterial surfaces can thus be described as outer sphere complex formation because it occurs through electrostatic interaction.     

Major proteins released by a protein-producing bacterium, Bacillus brevis 47, are derived from cell wall protein

B. brevis 47 secretes a vast amount of protein consisting mainly of two kinds with approximate molecular weights of 130,000 and 150,000. The two major extracellular proteins were indistinguishable from those of cell wall protein by SDS-polyacrylamide gel electrophoresis. Based on the results of analysis of amino acid composition, limited proteolysis followed by electrophoresis, and the cross-reactivity of antisera, we conclude that the 130K and 150K extracellular proteins are derived from the respective cell wall proteins. Furthermore, the NH2-terminal amino acid analysis suggests that the two major extracellular proteins are released from the cell wall without any modification of the NH2-terminal portion.     

Secondary cell wall polysaccharides from Bacillus cereus strains G9241, 03BB87 and 03BB102 causing fatal pneumonia share similar glycosyl structures with the polysaccharides from Bacillus anthracis

Secondary cell wall polysaccharides (SCWPs) are important structural components of the Bacillus cell wall and contribute to the array of antigens presented by these organisms in both spore and vegetative forms. We previously found that antisera raised to Bacillus anthracis spore preparations cross-reacted with SCWPs isolated from several strains of pathogenic B. cereus, but did not react with other phylogenetically related but nonpathogenic Bacilli, suggesting that the SCWP from B. anthracis and pathogenic B. cereus strains share specific structural features. In this study, SCWPs from three strains of B. cereus causing severe or fatal pneumonia (G9241, 03BB87 and 03BB102) were isolated and subjected to structural analysis and their structures were compared to SCWPs from B. anthracis. Complete structural analysis was performed for the B. cereus G9241 SCWP using NMR spectroscopy, mass spectrometry and derivatization methods. The analyses show that SCWPs from B. cereus G9241 has a glycosyl backbone identical to that of B. anthracis SCWP, consisting of multiple trisaccharide repeats of: →6)-α-d-GlcpNAc-(1?→?4)-β-d-ManpNAc-(1?→?4)-β-d-GlcpNAc-(1→. Both the B. anthracis and pathogenic B. cereus SCWPs are highly substituted at all GlcNAc residues with α- and β-Gal residues, however, only the SCWPs from B. cereus G9241 and 03BB87 carry an additional α-Gal substitution at O-3 of ManNAc residues, a feature lacking in the B. anthracis SCWPs. Both the B. anthracis and B. cereus SCWPs are pyruvylated, with an approximate molecular mass of ≈12,000?Da. The implications of these findings regarding pathogenicity and cell wall structure are discussed.     

Localization of the vegetative cell wall hydrolases LytC, LytE, and LytF on the Bacillus subtilis cell surface and stability of these enzymes to cell wall-bound or extracellular proteases

LytF, LytE, and LytC are vegetative cell wall hydrolases in Bacillus subtilis. Immunofluorescence microscopy showed that an epitope-tagged LytF fusion protein (LytF-3xFLAG) in the wild-type background strain was localized at cell separation sites and one of the cell poles of rod-shaped cells during vegetative growth. However, in a mutant lacking both the cell surface protease WprA and the extracellular protease Epr, the fusion protein was observed at both cell poles in addition to cell separation sites. This suggests that LytF is potentially localized at cell separation sites and both cell poles during vegetative growth and that WprA and Epr are involved in LytF degradation. The localization pattern of LytE-3xFLAG was very similar to that of LytF-3xFLAG during vegetative growth. However, especially in the early vegetative growth phase, there was a remarkable difference between the shape of cells expressing LytE-3xFLAG and the shape of cells expressing LytF-3xFLAG. In the case of LytF-3xFLAG, it seemed that the signals in normal rod-shaped cells were stronger than those in long-chain cells. In contrast, the reverse was found in the case of LytE-3xFLAG. This difference may reflect the dependence on different sigma factors for gene expression. The results support and extend the previous finding that LytF and LytE are cell-separating enzymes. On the other hand, we observed that cells producing LytC-3xFLAG are uniformly coated with the fusion protein after the middle of the exponential growth phase, which supports the suggestion that LytC is a major autolysin that is not associated with cell separation.