Control of biofilm formation by poly-ethylene-co-vinyl acetate films incorporating nisin

The aim of this study was to evaluate the effect of poly-ethylene-co-vinyl acetate (EVA) films incorporating different concentrations (0.1%, 0.5% and 1%) of nisin on the biofilm-forming ability of Listeria monocytogenes ATCC 7644, Staphylococcus aureus 815 and Staphylococcus epidermidis ATCC 35984. Nisin was incorporated into two grades of EVA (EVA14 and EVA28) in the melt during a common film-blowing operation. The efficacy of EVA/nisin films was evaluated by biofilm biomass measurements and Live/Dead staining in combination with fluorescence microscopy. In order to evaluate whether the nisin incorporation could modify the film surface properties, contact angle measurements and scanning electron microscopy were performed. The results revealed the efficacy of EVA14/nisin films in reducing biofilm formation on their surfaces with more evident effect for S. epidermidis than L. monocytogenes and S. aureus strains. In contrast, EVA28/nisin films showed unsatisfactory activity. Fluorescence microscopy confirmed poor biofilm formation on EVA14/nisin films, also characterised by the presence of dead cells. The data presented in this study offer new potential applications for developing strategies aimed to improve the effect of antimicrobial agents.     

Post-translational modification of nisin. The involvement of NisB in the dehydration process.

The lantibiotic nisin is an antimicrobial peptide produced by Lactococcus lactis. As with all lantibiotics, nisin contains a number of dehydro-residues and thioether amino acids that introduce five lanthionine rings into the target peptide. These atypical amino acids are introduced by post-translational modification of a ribosomally synthesized precursor peptide. In certain cases, the serine residue, at position 33 of nisin, does not undergo dehydration to Dha33. With native nisin this partially processed form represents about 10% of the total peptide, whereas with the engineered variants, [Trp30]nisin A and [Lys27,Lys31]nisin A, the proportion of peptide that escapes full processing was found to be to approximately 50%. This feature of nisin biosynthesis was exploited in an investigation of the role of the NisB protein in pre-nisin maturation. Manipulation of the level of NisB was achieved by cloning and overexpressing the plasmid-encoded nisB gene in a range of different nisin-producing strains. The resulting fourfold increase in the level of NisB significantly increased the efficiency of the dehydration reaction at Ser33. The final secreted product of biosynthesis by these strains was the homogenous form of the fully processed nisin (or nisin variant) molecule. The results presented represent the first experimental evidence for the direct involvement of the NisB protein in the maturation process of nisin.     

Online recovery of nisin during fermentation and its effect on nisin production in biofilm reactor

An online removal of nisin by silicic acid coupled with a micro-filter module was proposed as an alternative to reduce detrimental effects caused by adsorption of nisin onto producer, enzymatic degradation by protease, and product inhibition during fermentation. In this study, silicic acid was successfully used to recover nisin from the fermentation broth of Lactococcus lactis subsp. lactis NIZO 22186. The effect of pH (at 6.8 and 3.0) during adsorption process and several eluents (deionized water, 20% ethanol, 1 M NaCl, and 1 M NaCl + 20% ethanol) for desorption were evaluated in a small batch scale. Higher nisin adsorption onto silicic acid was achieved when the adsorption was carried out at pH 6.8 (67% adsorption) than at pH 3.0 (54% adsorption). The maximum recovery was achieved (47% of nisin was harvested) when the adsorption was carried out at pH 6.8 and 1 M NaCl + 20% ethanol was used as an eluent for desorption. Most importantly, nisin production was significantly enhanced (7,445 IU/ml) when compared with the batch fermentation without the online recovery (1,897 IU/ml). This may possibly be attributed to preventing the loss of nisin due the detrimental effects and a higher biomass density achieved during online recovery process, which stimulated production of nisin during fermentation.     

The effect of nisin-sodium chloride interactions on the outgrowth of Bacillus licheniformis spores

The effect of salt (NaCl) on the efficacy of nisin in preventing outgrowth of Bacillus licheniformis spores was determined in Plate Count Agar (PCA). An equivalent liquid medium was used for heat activation. Nisin and salt were added to the heat-activation medium, the PCA, or both. The spores were extremely sensitive to nisin; outgrowth were completely inhibited in salt-free media when 10 iu/ml of nisin was present in both the heat-activation and the growth media or when 100 iu/ml nisin was present in either the heat-activation and the growth medium. In media supplemented with 1% salt, outgrowth occurred from 1% of spores exposed to 100 iu/ml nisin in either the heat-activation or the growth medium. A 3% salt supplement was necessary before detectable outgrowth occurred when both the heat-activation and the growth media contained 100 iu/ml nisin. Salt appears to antagonize the sporicidal action of nisin by interfering with nisin adsorption onto the spore.     

Enhancement of Nisin Production by <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp. <Emphasis Type="Italic">lactis</Emphasis>

Lactococcus lactis subsp lactis BSA (L. lactis BSA) was isolated from a commercial fermented product (BSA Food Ingredients, Montreal, Canada) containing mixed bacteria that are used as starter for food fermentation. In order to increase the bacteriocin production by L. lactis BSA, different fermentation conditions were conducted. They included different volumetric combinations of two culture media (the Man, Rogosa and Sharpe (MRS) broth and skim milk), agitation level (0 and 100 rpm) and concentration of commercial nisin (0, 0.15, and 0.30 µg/ml) added into culture media as stimulant agent for nisin production. During fermentation, samples were collected and used for antibacterial evaluation against Lactobacillus sakei using agar diffusion assay. Results showed that medium containing 50 % MRS broth and 50 % skim milk gave better antibacterial activity as compared to other medium formulations. Agitation (100 rpm) did not improve nisin production by L. lactis BSA. Adding 0.15 µg/ml of nisin into the medium-containing 50 % MRS broth and 50 % skim milk caused the highest nisin activity of 18,820 AU/ml as compared to other medium formulations. This activity was 4 and ~3 times higher than medium containing 100 % MRS broth without added nisin (~4700 AU/ml) and 100 % MRS broth with 0.15 µg/ml of added nisin (~6650 AU/ml), respectively.     

Improving nisin production by increasing nisin immunity/resistance genes in the producer organism Lactococcus lactis

The effect on nisin production of increasing nisin immunity/resistance genes in Lactococcus lactis subsp. lactis MG1363 was investigated. The 60-kb nisin immunity/resistance plasmid pND300, which was isolated from a non-nisin-producing strain, encodes five genes involved in nisin immunity/resistance, which are very similar to those of the immunity/resistance system encoded by the nisin-production transposon. The introduction of pND300 into MG1363(TnNip) resulted in the construct being able to produce significantly more nisin than the parent MG1363(TnNip). The introduction of pND314, which contains the nisin immunity/resistance genes subcloned into pSA3, into MG1363(TnNip) allowed the strain to grow more rapidly than the parent MG1363(TnNip) with a concomitant increase in the rate of nisin production. This work illustrates that introduction of pND300 and a derivative containing the nisin immunity/resistance system of pND300 into MG1363 (TnNip) can result in significant alterations to the kinetics of nisin production. These observations indicate approaches that may be used successfully to improve the economics of nisin production. Received: 11 February 1998 / Received revision: 25 June 1998 / Accepted: 27 June 1998     

Molecular and Genetic Characterization of a Novel Nisin Variant Produced by Streptococcus uberis

Streptococcus uberis is one of the principal causative agents of bovine mastitis. In this study, we report that S. uberis strain 42 produces a lantibiotic, nisin U, which is 78% identical (82% similar) to nisin A from Lactococcus lactis. The 15.6-kb nisin U locus comprises 11 open reading frames, similar in putative functionality but differing in arrangement from that of the nisin A biosynthetic cluster. The nisin U producer strain exhibits specific resistance (immunity) to nisin U and cross-resistance to nisin A, a finding consistent with the 55% sequence similarity of their respective immunity peptides. Homologues of the nisin U structural gene were identified in several additional S. uberis strains, and in each case cross-protective immunity was expressed to nisin A and to the other producers of nisin U and its variants. To our knowledge, this is the first report both of characterization of a bacteriocin by S. uberis, as well as of a member of the nisin family of peptides in a species other than L. lactis.     

生物合成乳链菌肽及其螯合物的研究

从酸奶中筛选到一株乳链菌肽产生菌A1-06,研究了各种条件因素对其合成能力的影响。通过发酵培养基的优化,在以质量分数2.0%的蔗糖为唯一碳源、0.25%的酵母膏为唯一氮源条件下,A1-06合成乳链菌肽的产率为0.3 g.L-1,效价为1.018×106U.L-1,比在基础培养基中合成的活性提高17%。Mn2+对A1-06的合成能力有抑制作用,而吐温-80则有促进作用。对乳链菌肽及其Zn2+和Fe2+的螯合物的抑菌效果进行了比较,结果表明,乳链菌肽螯合Fe(Ⅱ)对G-菌有抑制作用,6 h的抑菌率为50.3%,而乳链菌肽、乳链菌肽螯合Zn(Ⅱ)对G-菌无明显的抑制作用。     

A Nisin Bioassay Based on Bioluminescence

A Lactococcus lactis subsp. lactis strain that can sense the bacteriocin nisin and transduce the signal into bioluminescence was constructed. By using this strain, a bioassay based on bioluminescence was developed for quantification of nisin, for detection of nisin in milk, and for identification of nisin-producing strains. As little as 0.0125 ng of nisin per ml was detected within 3 h by this bioluminescence assay. This detection limit was lower than in previously described methods.     

Improved antimicrobial activity of nisin-incorporated polymer films by formulation change and addition of food grade chelator

AIMS: The following polymers were developed: polyethylene (PE), a PE and polyethylene oxide (70% PE and 30% PEO; PE + PEO) blend, PE and nisin (PE + nisin), PE, nisin, and EDTA (PE + nisin + EDTA), and PE + PEO with nisin (PE + PEO + nisin). METHODS AND RESULTS: Of the polymers tested, PE and PE + PEO did not exhibit any antimicrobial activity against Brochothrix thermosphacta (BT); however, PE + nisin, PE + nisin + EDTA, and PE + PEO + nisin did. Beef surfaces were experimentally inoculated with 3.50 log10 cfu/cm2 of BT, vacuum packaged with each of the five polymers, and held at 4 degrees C for 21 d. After 3 d at 4 degrees C, BT was reduced > 1.70 log(10) by PE + nisin and > 3.50 log(10) with PE + nisin + EDTA or PE + PEO + nisin. By 21 d at 4 degrees C, BT was reduced to 0.30 log(10) cfu/cm(2) when treated with PE + PEO + nisin. CONCLUSION: It appears that PE + PEO + nisin or PE + nisin + EDTA were more effective for reducing BT, as compared to polymers composed of PE + nisin. SIGNIFICANCE AND IMPACT OF THE STUDY: Nisin-incorporated polymers may control the growth of undesirable bacteria, thereby extending the shelf life and possibly enhancing the microbial safety of meats.     

Promoting acid resistance and nisin yield of <Emphasis Type="Italic">Lactococcus lactis</Emphasis> F44 by genetically increasing D-Asp amidation level inside cell wall

Nisin fermentation by Lactococcus lactis requires a low pH to maintain a relatively higher nisin activity. However, the acidic environment will result in cell arrest, and eventually decrease the relative nisin production. Hence, constructing an acid-resistant L. lactis is crucial for nisin harvest in acidic nisin fermentation. In this paper, the first discovery of the relationship between D-Asp amidation-associated gene (asnH) and acid resistance was reported. Overexpression of asnH in L. lactis F44 (F44A) resulted in a sevenfold increase in survival capacity during acid shift (pH 3) and enhanced nisin desorption capacity compared to F44 (wild type), which subsequently contributed to higher nisin production, reaching 5346 IU/mL, 57.0% more than that of F44 in the fed-batch fermentation. Furthermore, the engineered F44A showed a moderate increase in D-Asp amidation level (from 82 to 92%) compared to F44. The concomitant decrease of the negative charge inside the cell wall was detected by a newly developed method based on the nisin adsorption amount onto cell surface. Meanwhile, peptidoglycan cross-linkage increased from 36.8% (F44) to 41.9% (F44A), and intracellular pH can be better maintained by blocking extracellular H⁺ due to the maintenance of peptidoglycan integrity, which probably resulted from the action of inhibiting hydrolases activity. The inference was further supported by the acmC-overexpression strain F44C, which was characterized by uncontrolled peptidoglycan hydrolase activity. Our results provided a novel strategy for enhancing nisin yield through cell wall remodeling, which contributed to both continuous nisin synthesis and less nisin adsorption in acidic fermentation (dual enhancement).     

Efficacies of Nisin A and Nisin V Semipurified Preparations Alone and in Combination with Plant Essential Oils for Controlling Listeria monocytogenes

The food-borne pathogenic bacterium Listeria is known for relatively low morbidity and high mortality rates, reaching up to 25 to 30%. Listeria is a hardy organism, and its control in foods represents a significant challenge. Many naturally occurring compounds, including the bacteriocin nisin and a number of plant essential oils, have been widely studied and are reported to be effective as antimicrobial agents against spoilage and pathogenic microorganisms. The aim of this study was to investigate the ability of semipurified preparations (SPP) containing either nisin A or an enhanced bioengineered derivative, nisin V, alone and in combination with low concentrations of the essential oils thymol, carvacrol, and trans-cinnamaldehyde, to control Listeria monocytogenes in both laboratory media and model food systems. Combinations of nisin V-containing SPP (25 μg/ml) with thymol (0.02%), carvacrol (0.02%), or cinnamaldehyde (0.02%) produced a significantly longer lag phase than any of the essential oil-nisin A combinations. In addition, the log reduction in cell counts achieved by the nisin V-carvacrol or nisin V-cinnamaldehyde combinations was twice that of the equivalent nisin A-essential oil treatment. Significantly, this enhanced activity was validated in model food systems against L. monocytogenes strains of food origin. We conclude that the fermentate form of nisin V in combination with carvacrol and cinnamaldehyde offers significant advantages as a novel, natural, and effective means to enhance food safety by inhibiting food-borne pathogens such as L. monocytogenes.     

Microplate Bioassay for Nisin in Foods, Based on Nisin-Induced Green Fluorescent Protein Fluorescence

A plasmid coding for the nisin two-component regulatory proteins, NisK and NisR, was constructed; in this plasmid a gfp gene (encoding the green fluorescent protein) was placed under control of the nisin-inducible nisF promoter. The plasmid was transformed into non-nisin-producing Lactococcus lactis strain MG1614. The new strain could sense extracellular nisin and transduce it to green fluorescent protein fluorescence. The amount of fluorescence was dependent on the nisin concentration, and it could be measured easily. By using this strain, an assay for quantification of nisin was developed. With this method it was possible to measure as little as 2.5 ng of pure nisin per ml in culture supernatant, 45 ng of nisin per ml in milk, 0.9 μg of nisin in cheese, and 1 μg of nisin per ml in salad dressings.     

Inhibition of Listeria innocua in Cheddar Cheese by Addition of Nisin Z in Liposomes or by In Situ Production in Mixed Culture

The effect of addition of purified nisin Z in liposomes to cheese milk and of in situ production of nisin Z by Lactococcus lactis subsp. lactis biovar diacetylactis UL719 in the mixed starter on the inhibition of Listeria innocua in cheddar cheese was evaluated during 6 months of ripening. A cheese mixed starter culture containing Lactococcus lactis subsp. lactis biovar diacetylactis UL719 was selected for high-level nisin Z and acid production. Experimental cheddar cheeses were produced on a pilot scale, using the selected starter culture, from milk with added L. innocua (10⁵ to 10⁶ CFU/ml). Liposomes with purified nisin Z were prepared from proliposome H and added to cheese milk prior to renneting to give a final concentration of 300 IU/g of cheese. The nisin Z-producing strain and nisin Z-containing liposomes did not significantly affect cheese production and gross chemical composition of the cheeses. Immediately after cheese production, 3- and 1.5-log-unit reductions in viable counts of L. innocua were obtained in cheeses with encapsulated nisin and the nisinogenic starter, respectively. After 6 months, cheeses made with encapsulated nisin contained less than 10 CFU of L. innocua per g and 90% of the initial nisin activity, compared with 10⁴ CFU/g and only 12% of initial activity in cheeses made with the nisinogenic starter. This study showed that encapsulation of nisin Z in liposomes can provide a powerful tool to improve nisin stability and inhibitory action in the cheese matrix while protecting the cheese starter from the detrimental action of nisin during cheese production.     

Antibacterial Activities of Nisin Z Encapsulated in Liposomes or Produced In Situ by Mixed Culture during Cheddar Cheese Ripening

This study investigated both the activity of nisin Z, either encapsulated in liposomes or produced in situ by a mixed starter, against Listeria innocua, Lactococcus spp., and Lactobacillus casei subsp. casei and the distribution of nisin Z in a Cheddar cheese matrix. Nisin Z molecules were visualized using gold-labeled anti-nisin Z monoclonal antibodies and transmission electron microscopy (immune-TEM). Experimental Cheddar cheeses were made using a nisinogenic mixed starter culture, containing Lactococcus lactis subsp. lactis biovar diacetylactis UL 719 as the nisin producer and two nisin-tolerant lactococcal strains and L. casei subsp. casei as secondary flora, and ripened at 7°C for 6 months. In some trials, L. innocua was added to cheese milk at 10⁵ to 10⁶ CFU/ml. In 6-month-old cheeses, 90% of the initial activity of encapsulated nisin (280 ± 14 IU/g) was recovered, in contrast to only 12% for initial nisin activity produced in situ by the nisinogenic starter (300 ± 15 IU/g). During ripening, immune-TEM observations showed that encapsulated nisin was located mainly at the fat/casein interface and/or embedded in whey pockets while nisin produced by biovar diacetylactis UL 719 was uniformly distributed in the fresh cheese matrix but concentrated in the fat area as the cheeses aged. Cell membrane in lactococci appeared to be the main nisin target, while in L. casei subsp. casei and L. innocua, nisin was more commonly observed in the cytoplasm. Cell wall disruption and digestion and lysis vesicle formation were common observations among strains exposed to nisin. Immune-TEM observations suggest several modes of action for nisin Z, which may be genus and/or species specific and may include intracellular target-specific activity. It was concluded that nisin-containing liposomes can provide a powerful tool to improve nisin stability and availability in the cheese matrix.     

Biosynthetic characterization and biochemical features of the third natural nisin variant,nisin Q,produced by Lactococcus lactis 61‐14

Aims: To characterize the genetic and biochemical features of nisin Q. Methods and Results: The nisin Q gene cluster was sequenced, and 11 putative orfs having 82% homology with the nisin A biosynthesis gene cluster were identified. Nisin Q production was confirmed from the nisQ‐introduced nisin Z producer. In the reporter assay, nisin Q exhibited an induction level that was threefold lower than that of nisin A. Nisin Q demonstrated an antimicrobial spectrum similar to those of the other nisins. Under oxidizing conditions, nisin Q retained a higher level of activity than nisin A. This higher oxidative tolerance could be attributed to the presence of only one methionine residue in nisin Q, in contrast to other nisins that contain two. Conclusions: The 11 orfs of the nisin producers were identical with regard to their functions. The antimicrobial spectra of the three natural nisins were similar. Nisin Q demonstrated higher oxidative tolerance than nisin A. Significance and Impact of the Study:  Genetic and biochemical features of nisin Q are similar to those of other variants. Moreover, owing to its higher oxidative tolerance, nisin Q is a potential alternative for nisin A.     

Nisin F-loaded brushite bone cement prevented the growth of Staphylococcus aureus in vivo

Aims: To determine if nisin F‐loaded self‐setting brushite cement could control the growth of Staphylococcus aureus in vivo. Methods and Results: Brushite cement was prepared by mixing equimolar concentrations of β‐tricalcium phosphate and monocalcium phosphate monohydrate. Nisin F was added at 5·0, 2·5 and 1·0% (w/w) and the cement moulded into cylinders. In vitro antibacterial activity was determined using a delayed agar diffusion assay. Release of nisin F from the cement was determined using BCA protein assays. Based on scanning electron microscopy and X‐ray diffraction analysis, nisin F did not cause significant changes in cement structure or chemistry. Cement containing 5·0% (w/w) nisin F yielded the most promising in vitro results. Nisin F‐loaded cement was implanted into a subcutaneous pocket on the back of mice and then infected with S. aureus Xen 36. Infection was monitored for 7 days, using an in vivo imaging system. Nisin F prevented S. aureus infection for 7 days and no viable cells were isolated from the implants. Conclusions: Nisin F‐loaded brushite cement successfully prevented in vivo growth of S. aureus. Significance and Impact of the Study: Nisin F incorporated into bone cement may be used to control S. aureus infection in vivo.     

Identification of Nisin-Producing Strains by Nisin-Controlled Gene Expression System

A specific method to identify nisin-producing strains was developed based on Nisin-Controlled gene Expression (NICE) vector pSec:Nuc. The plasmid pSec:Nuc was transformed into non-nisin-producing strain Lactococcus lactis NZ9000, a host commonly used for the NICE system. The generating strain L. lactis NZ9000/pSec:Nuc could sense extracellular inducer nisin and efficiently secrete a reporter protein Nuc, the staphylococcal nuclease (Nuc) into the medium. Instead of using purified nisin, the culture supernatants of nisin-producing strains were also used as inducers. Therefore, the NICE system could be used to identify nisin-producing strains. With this principle, 4 among 56 lactococci strains isolated from raw milk were identified as nisin producers. The results were further confirmed by polymerase chain reaction amplification with their genomic DNA as templates, and nucleotide sequencing revealed that three of them produced nisin A, and the others produced nisin Z. Those results made it possible to isolate and identify nisin-producing strains specifically and rapidly using NICE system.