Allometric relations of teeth and jaws in man

Static adult intraspecific allometry of jaws and teeth was investigated in a sample of 100 Negro crania. The relations between tooth area, postcanine surface, incisor surface, and four viscerocranial measures were examined separately for males and females. Our results indicate a marked lack of morphological integration between P-sets within the orofacial subregion and a similar lack of correspondence between jaw size and tooth size. Allometric analyses indicate that mandibular length scales negatively allometric to maxilloalveolar length and to bigonial width, that canine base area scales positively to upper and lower jaw length, and that all the other teeth scale negatively to jaw length. The postcanine surface area was found to be negatively allometric to the canine base area, which in turn scaled isometrically to incisor surface. Hence, any lengthening of the mandible will tend to be associated with a relative shortening of the maxilla, with relatively larger canines and a relative reduction of the cheek teeth.     

Static intraspecific maxillofacial allometry in the chacma baboon

Adult static intraspecific allometry of jaw size and tooth area was evaluated in a sample of 104 Papio ursinus crania (52 male, 52 female). Tooth areas were calculated from mesiodistal and buccolingual measurements of all the teeth in both arcades and were scaled to four viscerocranial measurements: bimaxillary width, maxillo-alveolar length, mandibular length and bigonial width. Craniodental allometric analyses indicate that larger animals will tend to have proportionately shorter and narrower lower jaws. From the log-transformed interspecific analyses between P. ursinus and C. aethiops we conclude that males and females within each species share a common exponential value for jaw length. Hence increased sexual dimorphism for muzzle length in P. ursinus is attributable to increased divergence between the male and female slopes. Post-canine area was found to be significantly correlated to maxillary length and to canine size only in females, with exponential values similar to those reported for the same bivariate regressions in C. aethiops. A hypothesis of nutritional equivalence is advanced to account for these observations. Canine base area and the area of P3 were the only tooth areas that scaled in a positively allometric fashion to jaw size--but only in males. Hence the existence of a canine complex is confirmed in the male Chacma baboon, the size of which is related to jaw length.     

Static intraspecific allometry of the dentition in Otoletnur crassicaudatus

Adult static intraspecific allometry of tooth size was evaluated in a sample of 66 Otolemur crassicaudatus (34 male, 32 female). Tooth areas were calculated from mesiodistal and buccolingual measurements of canines and postcanine teeth of both arcades and were scaled to four viscerocranial measurements: bimaxillary width; maxillo-alveolar length; mandibular length and bigonial width. Individual tooth crown areas were also scaled to total skull length, body length and body weight. From the log-transformed analyses it is concluded that postcanine tooth size was unrelated to body length or weight, and poorly correlated to skull length or jaw size. Although viscerocranial size appears to be independent of body size, these measures are well correlated to skull length. It is shown that the longer the skull, the shorter and narrower the maxilla, and the longer and broader the mandible. Canines are shown to scale negatively allometric to skull length, hence, large animals will have relatively small canines.     

An analysis of cercopithecoid odontometrics. I. The scaling of the maxillary dentition.

The relations between two tooth indices, post-canine area and incisor width in the upper jaw, and three variables, diet, body weight and body weight dimorphism, were examined separately for the males and females of 29 cercopithecoid species. Each species was assigned to one of three diet classes (folivore, frugivore, omnivore). Data on the other variable consisted of species means (log-transformed) obtained from published sources. The analytic techniques used were bivariate and multiple regression, the tooth indices being the dependent variables. All tooth indices scaled isometrically within diet classes, and all except female incisor width scaled with positive allometry across diet classes. In both sexes, the body weight adjusted mean incisor width of folivores was significantly smaller than that of either frugivores or omnivores. In the females, the body weight adjusted mean post-canine areas did not differ significantly across diet classes, while in the males the omnivores had a larger body weight adjusted mean post-canine area than either the folivores or frugivores. Female post-canine area was the only tooth index for which body weight dimorphism was a significant predictor. Extrapolations of these findings to other extant and to fossil primate species are discussed.     

Size and shape of the mandibular condyle in primates

The relationships between the size of the articular surface of the mandibular condyle and masticatory muscle size, tooth size, diet, and biomechanical variables associated with mastication were studied by taking 12 measurements on skulls of 253 adult female anthropoid primates, including three to ten specimens from each of 32 species. In regressions of condylar length, width, or area against body weight, logarithmic transformations substantially improve the fit of the equations compared with untransformed data. There is a strong relationship between condylar measurements and body weight, with all correlations being .94 or higher. The slopes of the allometric regressions of length, width, and area of the condylar head indicate slight positive allometry with body size. Folivorous primates have smaller condyles than frugivorous primates, and colobines have smaller condyles than cebids, cercopithecines, or hominoids. When colobines are eliminated, the differences between frugivores and folivores are not significant. However, the two species with the relatively largest condyles are Pongo pygmaeus and Cercocebus torquatus, suggesting that there may be a relationship between unusually large condylar dimensions and the ability to crack hard nuts between the teeth. Cranial features having strong positive correlations with condylar dimensions include facial prognathism, maxillary incisor size, maxillary postcanine area, mandibular ramus breadth, and temporal fossa area. These data are interpreted as indicating that relatively large condyles are associated with relatively large masticatory muscles, relatively inefficient mandibular biomechanics, and a large dentition. These relationships support the growing evidence that the temporomandibular joint is a stress-bearing joint in normal function.     

Craniodental features in male Mandrillus may signal size and fitness: an allometric approach

According to a hypothesis in the broader mammalian literature, secondary sexual characteristics that have evolved to signal fitness and size to other conspecifics should exhibit positive allometry across adult males within a species. Here this hypothesis is tested in the genus Mandrillus. The overbuilding of bony features in larger individuals necessitates a functional explanation as bone is metabolically expensive to produce and maintain. Canine size and size of the maxillary ridge are scaled against a body size surrogate in intraspecific samples of male Mandrillus sphinx (mandrills) and Mandrillus leucophaeus (drills). Areal dimensions are weighted more heavily as they represent the size of a feature as it is viewed by individuals. Measures of the maxillary ridge and canine tooth are significantly correlated with the size surrogate and scale with positive allometry in both samples supporting the hypothesis that these features function to advertise a male's body size and fitness to other males competing for mates and potential discerning females. This is the first study in primates to test for intraspecific positive allometric scaling of bony facial features in adult males based on a theory of fitness signaling and sexual selection.     

Data on morphometric analysis of anterior teeth from Hazaribag College of Dental Sciences and Hospital,jharkhand

It is of interest to document data on morphometric (measurement of external form) analysis of maxillary and mandibular anterior teeth collected from a dental set up using mesio-distal (MD) dimension. The mesiodistal dimensions of all permanent anterior teeth (central incisor, lateral incisor and canine) of 25 males and 25 females patients were recorded using digital vernier calipers. Data were charted and statistical analysis was done using Mann Whitney U test. Data shows sexual dimorphism for every tooth between males and females. However, dimorphism was exhibited only in maxillary and mandibular canine, mandibular central incisors, and lateral incisor. Hence,odontometric parameters offer simple, reliable and cost-effective in forensic investigation for recording gender discrimination.     

Sexual dimorphism of tooth size in anthropoids

We have examined the size of the canine and postcanine teeth of cebid and catarrhine primates in relation to each other, to jaw size and to body weight. We have found that the canine size of males is large enough to be limited by jaw shape and size. A large contribution of P4 to the postcanine row is associated with smaller canines in males. Neither factor seems to limit canine size in females. The females of a small number of species possess enlarged canines. Much of the variation of the postcanine row can be described by the ratio of the (nominal) crown areas of M1 to M3. This ratio is monomorphic which conforms with the general lack of dietary dimorphism in primates. A brief discussion of the evolution of canine size is offered with a new suggestion to account for canine reduction in male hominids.     

Interspecific allometry of the mandible,dental arch,and molar area in anthropoid primates: Functional morphology of masticatory components

Allometric equations relating the lengths and widths of the mandible and dental arch, and of molar area, were obtained in a wide range of anthropoid primates grouped into four subsets, pongids, cercopithecids, nonmarmoset platyrrhines, and marmosets. Mandibular width is negatively allometric against length across anthropoids but cercopithecids had relatively wider mandibles than nonmarmosets of the same size class. Mandibular length relative to dental arch length was isometric within and between the four groups but dental arch width scaled negatively against all the other dimensions examined in this study, indicating a functional dissociation between the dental arcade and the bony mandible. Molar area showed various scaling patterns relative to mandibular length (isometry) and width (positive). There were no parameters that scaled positively against body weight across groups, except for molar area in cercopithecids (strongly) and nonmarmoset (moderately). Notable functional specializations include relatively long dental arches in cercopithecoids, related to large, elongate bilophodont molars, and the tendency to increase relative jaw length across the range of anthropoid sizes, reflecting negative allometry of the brain (cranial bicondylar width). We caution that various allometry and functional patterns may be masked by generalizing from broad taxonomic comparison involving a large sweep of adaptative patterns.     

Craniometric allometry in the thicktailed bushbabyOtolemur Crassicaudatus

Static adult craniometric allometry was evaluated in a sample of 66Otolemur crassicaudatus skulls (34 males, 32 females). Although cranial measures were equally well correlated to skull length in males and females, there were noteworthy differences in the exponential values between the sexes. These results underlined the need for caution when allometric analyses are based on pooled data. From the cranial allometric analyses it is concluded that the longer the skull, the shorter and the narrower the maxilla, and the broader the bizygomatic distance. Although cranial length increased proportionately to the increase in skull length, the cranial width in females was positively allometric whilst in males it was negatively allometric. Allometric analyses of mandibular dimensions suggest that larger animals will have proportionately longer mandibulae, which will, in turn, be relatively wider across the gonia, yet shallower behind the first molars. It is postulated that the disproportionate widening of the zygomata might be related to the widening across the gonia.     

Tooth size and arcadal length correlates in man

Intra-arcadal mesiodistal and buccolingual tooth size correlations were evaluated in a sample of 125 caucasoids with ideal occlusion. Dental dimensions were corrected for arcade mength (as a measure of jaw size) by a series of regression analyses of each mesiodistal dimension on the sum of the mesiodistal dimensions within each arcade. Regression coefficients of tooth dimension on arcade length were calculated to gain an insight into the dimensional sensitivity of individual teeth to arcade length variation. The data presented here suggest a strong association between arcadal length (jaw size) dependence, and the dimensional stability of individual teeth. When corrected for arcade length, a definite pattern of tooth size correlation emerges: postcanine maxillary and mandibular teeth are negatively correlated to the anterior teeth and are positively correlated to one another. The hypothesis is developed that anterior and postcanine teeth should be viewed as two separate and negatively size-correlated units, beyond the boundaries of the four morphological tooth classes. Recognition of this basic dichotomous size arrangement within each jaw allows for a reassessment of some of the problems associated with hominid dental evolution.     

Interspecific and intraspecific relationships between tooth size and jaw size in primates

The association between mandibular robusticity, postcanine megadontia, and canine reduction in hominins has led to speculation that large and robust jaws might be required to spatially accommodate large canine and molar teeth in hominins and other primates. If so, then variations in mandibular form that are generally regarded as biomechanical adaptations to masticatory demands might instead be incidental effects of functional requirements of tooth support. While the association between large teeth and deep, robust jaws in hominins is well known, the relationship between tooth size and jaw size has not been systematically evaluated in a comparative sample of primates. We evaluate the relationships between molar tooth size, canine tooth size, and mandibular corpus and symphyseal dimensions in a sample of adult anthropoids in interspecific (n=84 species) and intraspecific (n=36 species) contexts. For intraspecific comparisons, tooth size and jaw size are correlated, but for a majority of species this is a function of sexual size dimorphism. Interspecific comparisons lend little direct support to the hypothesis that jaw breadth directly covaries with molar tooth breadth, but they do support the hypothesis that mandibular depth is associated with canine tooth size in males. The latter observation suggests that if there is a causal association between canine size and mandibular depth, it is subject to a threshold effect. In contrast, neither corpus nor symphyseal robusticity, measured as a shape index of breadth/height, are correlated with tooth size. Our results suggest that further studies of the relationship between tooth size and corpus morphology should focus on tooth root size and corpus bony architecture, and that species-specific factors should have a strong impact on such relationships.     

On the definition of variables in studies of primate dental allometry

Cranial and dental measurements are taken on 253 adult female primates from 32 species. Regression equations are calculated to determine allometric relationships between anterior tooth size, posterior tooth size, and body size. When cranial length or skull length is used as the measure of general size, the results of the equations differ from when body weight is the reference dimension. Similarly, using different definitions of posterior tooth size (such as mandibular second molar length and maxillary postcanine area) alters results substantially. The same occurs with different definitions of anterior tooth size. It has been common in studies of primate dental allometry to generalize from the specific variables measured to broad functional interpretations. However, highly correlated variables cannot be substituted one for another in allometric analyses without important changes in the results of the equation. Interpretation of allometric data is more highly restricted to the precise variables measured in a particular study than has been generally recognized.     

Evolutionary dental changes.

In the evolution of primates there has been a tendency towards reduction in jaw length and prognathism, mandibular canine size and first molar cusp number, and third molar presence. These oral structures were contrasted, and compared with cranial size, body height and weight, and finger length in 118 males and 102 females of the Burlington Growth Centre. Body weight was significantly related to canine width and to jaw length and prognathism. These relationships were stronger in the males than in the females. The evolutionary reduction in these dental dimensions may result from an evolutionary reduction in genetically determined body size. In the males the number of molar cusps was related to finger length and cranial height. Agenesis of third molars was related to the length of the maxilla in both sexes. In the females, canine width was related to the number of cusps of the first molars, agenesis of third molars, and length of a finger. Simultaneous reductions in dental structures were more frequent in the females.     

Postcanine tooth size in female primates

The results of many allometric studies of postcanine tooth size in mammals have not corresponded to expectations of tooth size based on energy requirements and dental function. The purpose of this study is to investigate the relationship between postcanine occlusal surface area, body size, and the metabolic demands of pregnancy and lactation in female primates. Tooth and body sizes from 38 primate species were taken from the literature to test two hypotheses: 1) females should have relatively larger teeth than males in order to masticate additional food for the energetic costs of reproduction; 2) taxa with the largest neonatal size (a measure of average metabolic costs of pregnancy and lactation) should have females with a greater degree of relative dental enlargement. The results show that relatively large female teeth are not found consistently in primate species. Females have less occlusal surface area than expected on the basis of the male tooth and body size regression in 21% of the species, and there is no correlation between relative female tooth size and relative newborn size across higher primate taxa. The degree of female dental enlargement is most closely related to degree of sexual dimorphism in body weight. The correlation between degree of body weight dimorphism and relatively larger postcanine teeth in females than in males is 0.87 in the 38 species. Species that are monomorphic in weight tend to be monomorphic in tooth size even though females apparently require more food than males.(ABSTRACT TRUNCATED AT 250 WORDS)     

Relationship between canine dimorphism and mandibular morphology in the hamadryas baboon and the Japanese monkey

To examine morphological interrelationships between canine size and mandibular corpus shape, inter-sex comparisons were made in the hamadryas baboon and the Japanese monkey, known to display extreme and moderate canine dimorphism, respectively. Results of adult comparisons showed that all mandibular dimensions were significantly larger in the males than in the females in both species. In the hamadryas baboon, the males also exhibited a higher ratio of anterior to posterior corpus height than the females. This sex difference in corpus shape was not significant in the Japanese monkey, indicating lack of involvement of canine dimorphism. Analysis of mandibular growth patterns in the hamadryas baboon demonstrated that significant sexual size difference did not occur before incisor eruption, and that the anteriorly high corpus of the adult male mandible was associated with a rapidly increasing symphyseal height after incisor eruption. It was also shown that the female canine started to erupt shortly after incisor eruption, while the forming male canine continued to stay near the mandibular base and developed further in size until eruption. The relative positions of the incisors kept shifting upwards even after eruption in the males, while they hardly changed in the females. It is therefore suggested that the prolonged development and size increase of the male canine is accompanied by further enlargement of the symphysis, resulting in the higher anterior corpus of the adult males compared to the adult females. The results thus indicate the importance of understanding the spatial relationships of the developing teeth in interpreting mandibular morphology.     

Sexual dimorphism and allometry in two seed beetles (Coleoptera: Bruchidae)

Male Callosobruchus chinensis (Coleoptera: Bruchidae) have elaborated, pectinate antennae, which are absent from conspecific females and both sexes of a congener, Callosobruchus maculatus. To begin to unravel the mechanisms producing this striking dimorphism, we examined which morphological traits best explain body size variation in bruchid beetles and quantified sexual dimorphism of antenna size through allometric analyses. Using principal component analyses, we found that elytron length and pronotum width were significantly correlated with the first principal component, which was interpreted as explaining variation in body size. Regressions of log‐transformed body size measures on log‐transformed antenna length revealed that males of both species had longer antennae than conspecific females for any given body size, although most of this effect was attributable to higher intercepts, rather than increased allometry, in males. Comparisons among heterospecific males revealed that C. maculatus males have noticeably longer antennae than C. chinensis males at large body sizes. Callosobruchus chinensis males, thus, appear to have increased the receptive area of their antennae by adding to the width of, rather than further elongating, their antennae. Finally, we found evidence for positive allometry between log‐transformed antenna length and log‐transformed antenna width in C. chinensis males. We discuss our results in the context of evidence supporting the presence of an additional, and potentially unique, sex pheromone in C. chinensis females.     

Thin-plate spline analysis of allometry and sexual dimorphism in the human craniofacial complex

The relationship between allometry and sexual dimorphism in the human craniofacial complex was analyzed using geometric morphometric methods. Thin-plate splines (TPS) analysis has been applied to investigate the lateral profile of complete adult skulls of known sex. Twenty-nine three-dimensional (3D) craniofacial and mandibular landmark coordinates were recorded from a sample of 52 adult females and 52 adult males of known age and sex. No difference in the influence of size on shape was detected between sexes. Both size and sex had significant influences on shape. As expected, the influence of centroid size on shape (allometry) revealed a shift in the proportions of the neurocranium and the viscerocranium, with a marked allometric variation of the lower face. Adjusted for centroid size, males presented a relatively larger size of the nasopharyngeal space than females. A mean-male TPS transformation revealed a larger piriform aperture, achieved by an increase of the angulation of the nasal bones and a downward rotation of the anterior nasal floor. Male pharynx expansion was also reflected by larger choanae and a more posteriorly inclined basilar part of the occipital clivus. Male muscle attachment sites appeared more pronounced. In contrast, the mean-female TPS transformation was characterized by a relatively small nasal aperture. The occipital clivus inclined anteriorly, and muscle insertion areas became smoothed. Besides these variations, both maxillary and mandibular alveolar regions became prognathic. The sex-specific TPS deformation patterns are hypothesized to be associated with sexual differences in body composition and energetic requirements.     

Estimating age of harbor seals (Phoca vitulina) with incisor teeth and morphometrics

We compared annuli counts from sets of canine, postcanine, and incisor teeth from 450 subsistence-harvested harbor seals, submitted blind to a laboratory. Postcanine and incisor ages were highly correlated with canine age estimates ( r = 0.985 and r = 0.984, respectively), as were postcanine and incisor teeth ( r = 0.984). Age estimates from teeth of 23 known-aged seals were highly correlated; canine teeth r = 0.987; postcanine r = 0.996; incisor r = 0.992, although age for all tooth-types was underestimated for a 29-yr-old seal. Incisor estimates were variable; comparison of age estimates from two incisors/individual ( n = 42) was r = 0.992 if only high-quality age estimates were used and r = 0.705 if lower-quality estimates were used. Morphometrics and incisor-based ages of 164 live-captured seals were explored to derive a method of estimating ages of harbor seals when age estimates are needed immediately; 39 seals were of known age. Curvilinear length, mass, and axial girth were most predictive of age for females, and curvilinear length and mass for males (equations for morphometrically calculating ages are given). Morphometric-based age estimates were highly correlated with known ages ( r = 0.896) and incisor-based estimates ( r = 0.904) and discrepancies between known and morphometric-based ages were small for younger seals. Morphometric-based age estimates also accurately distinguished between young and mature individuals.     

Metrical dental analysis on golden monkey (Rhinopithecus roxellana)

Dental variation in the Chinese golden monkey (Rhinopithecus roxellana) is here evaluated by univariate, bivariate, and multivariate analyses. Allometric analyses indicate that canines and P3s are positively, but other dimensions negatively scaled to mandible and maxilla, and to body size. With the exception of the mesiodistal dimensions of I₁ and M₃, and the buccolingual dimension of P₄, mandibular dental variables show similar scaling relative to body size. Analysis of residuals shows that males have significantly larger canine, P³ and buccolingual dimensions of the postcanine teeth (M² and M³) than females. A significant difference in shape between the sexes is found in the buccolingual dimension of the upper teeth, but not in the mandible. Unlike the situation in some other species, female golden monkeys do not exhibit relatively larger postcanine teeth than males. In fact, the reverse is true, expecially for M²s and M³s. The fact that most of the dental variables show low negative allometry to body size might be related a cold environment that has led to the development of larger body size with reduced energy loss. When the raw data are examined by Discriminant Function Analysis the sexes are clearly distinguishable.