Cobalt(IV) corroles as catalysts for the electroreduction of O2: reactions of heterobimetallic dyads containing a face-to-face linked Fe(III) or Mn(III) porphyrin

A series of heterobinuclear cofacial porphyrin-corrole dyads containing a Co(IV) corrole linked by one of four different spacers in a face-to-face arrangement with an Fe(III) or Mn(III) porphyrin have been examined as catalysts for the electroreduction of O(2) to H(2)O and/or H(2)O(2) when adsorbed on the surface of a graphite electrode in air-saturated aqueous solutions containing 1M HClO(4). The examined compounds are represented as (PCY)M(III)ClCo(IV)Cl where P is a porphyrin dianion, C is a corrole trianion and Y is a biphenylene (B), 9,9-dimethylxanthene (X), dibenzofuran (O) or anthracene (A) spacer. The catalytic behavior of the seven investigated dyads in the two heterobimetallic (PCY)MClCoCl series of catalysts is compared on one hand to what was previously reported for related dyads with a single Co(III) corrole macrocycle linked to a free-base porphyrin with the same set of linking bridges, (PCY)H(2)Co, and on the other hand to dicobalt porphyrin-corrole dyads of the form (PCY)Co(2) which were shown to efficiently electrocatalyze the four electron reduction of O(2) at a graphite electrode in acid media. Comparisons between the four series of porphyrin-corrole dyads, (PCY)Co(2), (PCY)H(2)Co, (PCY)FeClCoCl and (PCY)MnClCoCl, show that in all cases the biscobalt dyads catalyze O(2) electroreduction at potentials more positive by an average 110mV as compared to the related series of compounds containing a Co(III) or Co(IV) corrole macrocycle linked to a free-base metalloporphyrin or a metalloporphyrin with an Fe(III) or Mn(III) central metal ion. The data indicates that the E(1/2) values where electrocatalysis is initiated is related to the initial site of electron transfer, which is the Co(III)/Co(II) porphyrin reduction process in the case of (PCY)Co(2) and the Co(IV)/Co(III) corrole reduction in the case of (PCY)MnClCoCl, (PCY)FeClCoCl and (PCY)H(2)Co. The overall data also suggests that the catalytically active form of the biscobalt dyad in (PCY)Co(2) contains a Co(II) porphyrin and a Co(IV) corrole.     

Bio-mimetic hydrogen production from polysaccharide using the visible light sensitization of zinc porphyrin

A biohydrogen production system coupling the polysaccharide such as sucrose and maltose degradation with invertase and glucose dehydrognase (GDH) and hydrogen production with colloidal platinum as hydrogen-evolved catalyst using the visible light-induced photosensitization of water-soluble zinc porphyrin, zinc tetraphenylporphyrin tetrasulfonate (ZnTPPS) has been investigated. Continuous hydrogen gas production was observed when the sample solution containing polysaccharide, invertase, GDH, nicotinamide adenine dinucreotide (NAD(+)), ZnTPPS, methylviologen (an electron relay reagent), and colloidal platinum was irradiated by visible light. After 240-min irradiation, the amount of hydrogen production in the system using sucrose and maltose was estimated to be 3.1 and 0.35 micromol, respectively.     

Trinary Layered Double Hydroxides as High‐Performance Bifunctional Materials for Oxygen Electrocatalysis

Layered double hydroxides (LDHs) are a family of high‐profile layer materials with tunable metal species and interlayer spacing, and herein the LDHs are first investigated as bifunctional electrocatalysts. It is found that trinary LDH containing nickel, cobalt, and iron (NiCoFe‐LDH) shows a reasonable bifunctional performance, while exploiting a preoxidation treatment can significantly enhance both oxygen reduction reaction and oxygen evolution reaction activity. This phenomenon is attributed to the partial conversion of Co²⁺ to Co³⁺ state in the preoxidation step, which stimulates the charge transfer to the catalyst surface. The practical application of the optimized material is demonstrated with a small potential hysteresis (800 mV for a reversible current density of 20 mA cm^?2) as well as a high stability, exceeding the performances of noble metal catalysts (commercial Pt/C and Ir/C). The combination of the electrochemical metrics and the facile and cost‐effective synthesis endows the trinary LDH as a promising bifunctional catalyst for a variety of applications, such as next‐generation regenerative fuel cells or metal–air batteries.     

Biorefining of platinum group metals from model waste solutions into catalytically active bimetallic nanoparticles

Bacteria can fabricate platinum group metal (PGM) catalysts cheaply, a key consideration of industrial processes and waste decontaminations. Biorecovery of PGMs from wastes is promising but PGM leachates made from metallic scraps are acidic. A two‐step biosynthesis ‘pre‐seeds’ metallic deposits onto bacterial cells benignly; chemical reduction of subsequent metal from acidic solution via the seeds makes bioscaffolded nanoparticles (NPs). Cells of Escherichia coli were seeded using Pd(II) or Pt(IV) and exposed to a mixed Pd(II)/Pt(IV) model solution under H₂ to make bimetallic catalyst. Its catalytic activity was assessed in the reduction of Cr(VI), with 2 wt% or 5 wt% preloading of Pd giving the best catalytic activity, while 1 wt% seeds gave a poorer catalyst. Use of Pt seeds gave less effective catalyst in the final bimetallic catalyst, attributed to fewer and larger initial seeds as shown by electron microscopy, which also showed a different pattern of Pd and Pt deposition. Bimetallic catalyst (using cells preloaded with 2 wt% Pd) was used in the hydrogenation of soybean oil which was enhanced by ~fourfold using the bimetallic catalyst made from a model waste solution as compared to 2 wt% Pd preloaded cells alone, with a similar selectivity to cis C18:1 product as found using a Pd‐Al₂O₃ commercial catalyst.     

Tailored Electron Transfer Pathways in Aucore/Ptshell–Graphene Nanocatalysts for Fuel Cells

Au_core/Pt_shell–graphene catalysts (G‐Cys‐Au@Pt) are prepared through chemical and surface chemical reactions. Au–Pt core–shell nanoparticles (Au@Pt NPs) covalently immobilized on graphene (G) are efficient electrocatalysts in low‐temperature polymer electrolyte membrane fuel cells. The 9.5 ± 2 nm Au@Pt NPs with atomically thin Pt shells are attached on graphene via l ‐cysteine (Cys), which serves as linkers controlling NP loading and dispersion, enhancing the Au@Pt NP stability, and facilitating interfacial electron transfer. The increased activity of G‐Cys‐Au@Pt, compared to non‐chemically immobilized G‐Au@Pt and commercial platinum NPs catalyst (C‐Pt), is a result of (1) the tailored electron transfer pathways of covalent bonds integrating Au@Pt NPs into the graphene framework, and (2) synergetic electronic effects of atomically thin Pt shells on Au cores. Enhanced electrocatalytic oxidation of formic acid, methanol, and ethanol is observed as higher specific currents and increased stability of G‐Cys‐Au@Pt compared to G‐Au@Pt and C–Pt. Oxygen reduction on G‐Cys‐Au@Pt occurs at 25 mV lower potential and 43 A g_Pt^?1 higher current (at 0.9 V vs reversible hydrogen electrode) than for C–Pt. Functional tests in direct fomic acid, methanol and ethanol fuel cells exhibit 95%, 53%, and 107% increased power densities for G‐Cys‐Au@Pt over C–Pt, respectively.     

Enhanced Cathodic Oxygen Reduction and Power Production of Microbial Fuel Cell Based on Noble‐Metal‐Free Electrocatalyst Derived from Metal‐Organic Frameworks

Microbial fuel cell (MFC) can generate electricity from organic substances based on anodic electrochemically active microorganisms and cathodic oxygen reduction reaction (ORR), thus exhibiting promising potential for harvesting electric energy from organic wastewater. The ORR performance is crucial to both power production efficiency and overall cost of MFC. A new type of metal‐organic‐framework‐derived electrocatalysts containing cobalt and nitrogen‐doped carbon (CoNC) is developed, which is effective to enhance activity, selectivity, and stability toward four‐electron ORR in pH‐neutral electrolyte. When glucose is used as the substrate, the maximum power density of 1665 mW m^?2 is achieved for the optimized CoNC pyrolyzed at 900 °C, which is 39.8% higher than that of 1191 mW m^?2 for commercial Pt/C catalyst in the single‐chamber MFC. The improved performance of CoNC catalyst can be attributed to large surface area, microporous nature, and the involvement of nitrogen‐coordinated cobalt species. These properties enable the efficient ORR by increasing the active sites and enhancing mass transfer of oxygen and protons at “water‐flooding” three‐phase boundary where ORR occurs. This work provides a proof‐of‐concept demonstration of a noble‐metal‐free high‐efficiency and cost‐effective ORR electrocatalyst for effective recovery of electricity from biomass materials and organic wastewater in MFC.     

Electrochemically Modifying the Electronic Structure of IrO2 Nanoparticles for Overall Electrochemical Water Splitting with Extensive Adaptability

Designing the electrocatalysts that are stable and active for extensively adaptable water splitting is highly desirable for developing hydrogen based energy. IrO₂ is a promising and widely used catalyst for the oxygen evolution reaction in commercial applications, but is rarely used for the hydrogen evolution reaction (HER), due to the high Gibbs free energy for hydrogen adsorption (ΔG_H*). Herein, an approach to modify the electronic structure of IrO₂ via cyclic voltammetry is proposed. In this process, Ir(+4) is partially reduced and trace Pt is simultaneously deposited on IrO₂, which greatly lowers the ΔG_H* and thus accelerates the reaction kinetics. The as‐prepared Pt–IrO₂/CC with low noble metal loading (36.6 µg cm^?2_(Ir+Pt)) exhibits excellent HER activity with overpotentials of 5, 22, and 26 mV at 10 mA cm^?2 in 0.5 m H₂SO₄, 1 m KOH, and 1 m phosphate buffer solution, respectively, making it possible to organize an all‐IrO₂ based water electrolyzer. The Pt–IrO₂/CC||IrO₂/CC couple exhibits a promising activity and stability in pH‐universal conditions as well as natural seawater for H₂ production. Density function theory calculations reveal that the optimized electronic structure of IrO₂ balances the ΔG_H*, resulting in a much enhanced HER performance.     

The one-electron reduction of uroporphyrin I by rat hepatic microsomes

Uroporphyrin I, which accumulates in body tissues of congenital erythropoietic porphyria patients, can undergo an enzymatic one-electron reduction to the porphyrin anion radical when a suitable reducing cofactor is present. We have demonstrated, in the absence of light, that anaerobic microsomal incubations containing NADPH and uroporphyrin I give an electron spin resonance spectrum consistent with the enzymatic formation of a porphyrin anion free radical. This radical undergoes a second-order decay (k2 approximately 10(5) M-1 s-1) due to nonenzymatic disproportionation of the radical. Aerobic microsomal incubations were also investigated for the reduction of oxygen to superoxide by monitoring oxygen consumption and the spin-trapping of superoxide. These experiments demonstrate that electron transfer from the porphyrin radical to molecular oxygen does occur, but due to the slow formation of the radical anion, no oxygen consumption above the basal level could be detected in the microsomal incubations. The photoreduction of uroporphyrin I in aerobic and anaerobic incubations was also investigated.     

Electrocatalytic reduction of protons and oxygen at glassy carbon electrodes coated with a cobalt(II)/platinum(II) porphyrin

The electrocatalytic reduction of protons in 1.0 M perchloric acid at glassy carbon electrodes anodically modified with a Co(II)/Pt(II) porphyrin show shifts of 400 mV versus Ag/AgCl when compared to the same electrodes which have not been anodically modified. Anodic cycling of glassy carbon electrodes coated with the Co(II)/Pt(II) porphyrin in this study form stable electroactive films capable of improving both electroreduction of protons to hydrogen and oxygen to both peroxide and water. Electrooxidation of glassy carbon electrodes coated with the free base porphyrin show no improvement in catalytic ability for the reduction of protons in acidic solution or the reduction of molecular oxygen in basic solution. Glassy carbon electrodes coated with the Co(II)/Pt(II) porphyrin indicate, by rotating disk electrochemistry, that the electrocatalysis of oxygen is a two electron process leading to the formation of hydrogen peroxide. Koutecky-Levich plots of the data obtained from the reduction of oxygen at electrode surfaces coated with the Co(II)/Pt(II) porphyrin after oxidation of the surface indicate that 25% of the oxygen is reduced by four electrons directly to water while 75% of the oxygen is reduced by two electrons to hydrogen peroxide.     

Activity Restoration of Pt–Ni Octahedron via Phase Recovery for Anion Exchange Membrane-Unitized Regenerative Fuel Cells

Unitized regenerative fuel cells (URFCs) offer a cost-effective solution for energy conversion by functioning as both fuel cells and electrolyzers. Anion-exchange membrane-based URFCs (AEM-URFCs) require bifunctional electrocatalysts, such as Pt–Ir alloys, for the oxygen evolution reaction (water electrolysis mode) and oxygen reduction reaction (fuel cell mode). However, the low stability of Pt in alkaline media and the high cost of Ir remain challenges for the widespread application of these URFCs. In this study, a Pt–Ni octahedral alloy is synthesized to replace Ir with Ni as the oxygen evolution reaction catalyst. The alloying effect of Pt–Ni inhibits the dissolution of Pt and transforms PtOx to metallic Pt via a recovery process, thereby providing a new operational strategy for improving the durability of AEM-URFCs. Remarkably, the performance of the AEM-URFC single cell is maintained over ten cycles after the recovery process, demonstrating the viability of this approach for long-term operations. These findings pave the way for broader applications and advancements of AEM-URFCs.     

A chemiluminescent metalloimmunoassay based on silver deposition on colloidal gold labels

A sensitive chemiluminescent (CL) immunoassay of human immunoglobulin (IgG) which combined the inherent high sensitivity of CL analysis with the dramatic signal amplification of silver precipitation on colloidal gold tags was developed. First, the sandwich-type complex was formed in this protocol by the primary antibody immobilized on the polystyrene wells, the analyte in the sample, and the secondary antibody labeled with colloidal gold. Second, the colloidal gold was treated by an Ag(+) reduction solution, which resulted in the catalytic precipitation of silver on the surface of colloidal gold. Third, a large number of Ag(+) were oxidatively released in HNO(3) solution from the silver metal anchored on the sandwich-type complexes and then the human IgG was indirectly determined by a sensitive combined CL reaction of Ag(+)-K(2)S(2)O(8)-Mn(2+)- H(3)PO(4)-luminol. The chemiluminescence intensity depends linearly on the logarithm of the concentration of human IgG over the range of 0.02-50ngml(-1) and detection limit (3sigma) is 0.005ngml(-1) (i.e., approximately 3x10(-14)M, 3amol in 100-mul sample). This assay has been successfully applied to the determination of human IgG in human serum samples and showed great potential for numerous applications in immunoassay.     

Synthesis of bioethanol from biomass-derived syngas over carbon nanotube/silica supported catalyst

Multi-walled carbon nanotubes (MWNTs) were functionalized with pyrogallol and used in a composite with silica as a support for a Cu-Co based catalyst. The catalysts were characterized using X-ray diffraction, transmission electron microscopy, and H(2) temperature programmed reduction. The effects of pyrogallol and the weight ratio of silica to MWNTs on the performance of the catalyst were studied in a fixed bed reactor. The increase of the amount of MWNTs in the catalyst support was found to favor decreased methanol production and increased production of C2+ alcohols. Using pyrogallol in catalyst preparation was also found to increase the production of C2+ alcohols. It was concluded that pyrogallol improves the distribution and uniformity of metal particles on the support, decreases the size of metal particles and increasing the rate of catalytic reduction.     

Photo-induced electron transfer between hypocrellins and nano-sized semiconductor CdS-- EPR study on the kinetics of photosensitized reduction in HA-CdS and HB-CdS systems

Both HA-CdS and HB-CdS (Hys-CdS, Hys represents HA, HB) complex systems were established according to the dynamics of heterogeneous electron-transfer process ＜0. In these systems, the electron transferring from 1Hys* to conduction band of CdS is feasible. Determined from the fluorescence quenching, the apparent association constants (Kapp) between Hypocrellin A (HA), Hypocrellin B (HB) and CdS sol. were about 940 (mol/L)-1, 934 (mol/L)-1, respectively. Fluorescence lifetime measurements gave the rate constant for the electron transfer process from 1HA*, 1HB* into conduction band of CdS semiconductor as 5.16×109 s-1, 5.10×109 s-1, respectively. TEMPO (2,2,6,6-tetramethy-1-piperdinyloxy), a stable nitroxide radical, was used in the kinetic study of the reduction reaction taking place on the surface of a CdS colloidal semiconductor, kinetics equation of the reaction was determined with the electron paramagnetic resonance (EPR) method, and the reaction order of TEMPO is zero. When Hys were added, the rate of EPR increased greatly. By comparing rate constants, the Hys-CdS systems were revealed to be about 350 times more efficient than CdS sol. alone in the photoreduction of TEMPO under visi-ble light. It suggests that Hys can be used as efficient sensitizers of a colloidal semiconductor in the application of solar energy.     

Toxic effects of mercury(II), cadmium(II) and lead(II) porphyrins on Trypanosoma brucei brucei growth

The effects of free mercury(II), cadmium(II) and lead(II) ions and their metalloporphyrin-derivatives on Trypanosoma brucei brucei growth in culture were studied. All experiments were conducted in the dark. IC(50) values on growth obtained in 24-h time-course experiments were 1.5 x 10(-7), 2.4 x 10(-6), 4.4 x 10(-6) and 2.6 x 10(-5) M for mercury(II) porphyrin, cadmium(II) porphyrin, lead(II) porphyrin and free base porphyrin, respectively. While the IC50 values for Hg2+, Cd2+ and Pb2+ were 3.6 x 10(-6), 1.5 x 10(-5) and 1.6 x 10(-5) M, respectively. These results clearly indicate that the toxicity of the metalloporphyrin complexes of mercury(II), cadmium(II) and lead(II) to T. b. brucei parasites was much higher compared to their free metal ions and free base porphyrin at low concentrations. It was also observed after 8 h incubation that the metalloporphyrins were effective in inhibiting the division of the parasites at concentrations >1.25 x 10(-7) M for mercury(II) porphyrin, concentrations >1.2 x 10(-6) M for cadmium(II) and lead(II) porphyrins and at concentrations >3.6 x 10(-6) M for Hg2+ ion. These observations were not detected in samples treated with the free metal ions and the free base porphyrin at the same concentrations. Interestingly, trypanosomes treated with metalloporphyrin complexes displayed different morphological features from those cells treated with free base porphyrin or metal ions. The chemotherapeutic potential of the metalloporphyrins of H2TMPyP for treatment of African trypanosomiasis is discussed.     

The coordination of imidazole and substituted pyridines by the hemeoctapeptide N-acetyl-ferromicroperoxidase-8 (FeIINAcMP8)

The N-terminus acetylated ferric hemeoctapeptide from cytochrome c, N-acetylmicroperoxidase-8 (Fe(III)-NAcMP8) can be reduced by dithionite in aqueous solution to produce Fe(II)-NAcMP8. The UV-Vis spectrum has a broad Soret band and relatively poorly defined Q bands which is consistent with a mixture of a five-coordinate high spin species with His as the axial ligand and a six-coordinate, predominantly high spin species with His/H(2)O as axial ligands. There are two spectroscopically observable pK(a)s at 8.7+/-0.1 and 10.9+/-0.2 which are attributed to ionization of a heme propionic acid group and coordinated H(2)O, respectively; a pK(a) > or = 14 is due to ionization of the proximal His ligand. Equilibrium constants were determined by UV-Vis spectrophotometry at 25.0+/-0.2 degrees C and 0.5 M ionic strength (NaClO(4)) for the coordination of imidazole and a number of substituted pyridines, and complement available data for the ferric hemepeptide, allowing a comparison to be made of the affinity of an iron porphyrin with Fe in the +2 and +3 oxidation states towards these ligands. Imidazole is coordinated more strongly by the ferric porphyrin (log K=4.08) than by the ferrous porphyrin (log K=3.40). The equilibrium constants for coordination of pyridines by the ferric and ferrous porphyrins increase and decrease, respectively, with increasing ligand basicity. Values determined by cyclic voltammetry show the same dependence on the identity of the ligand. In the ferric porphyrin, the stability of the complex increases with the basicity of the ligand and hence its ability to donate electron density onto the metal. In the case of the more electron rich ferrous porphyrin, greater stability occurs with pyridine ligands that have an electron withdrawing group and hence can accept electron density from the metal. This is consistent with the midpoint reduction potentials E(1/2) of the pyridine complexes determined by cyclic voltammetry; E(1/2) is linearly dependent on, and becomes more negative with an increase in, ligand basicity. Log K for coordination of pyridines by the ferrous hemepeptide correlates well with the energy of the ligand frontier orbital with pi symmetry, suggesting that pi-bonding effects are significant in determining the strength of binding of pyridines by a ferrous porphyrin.     

Reduction kinetics of Fe(III), Co(III), U(VI), Cr(VI), and Tc(VII) in cultures of dissimilatory metal-reducing bacteria

The reduction kinetics of Fe(III)citrate, Fe(III)NTA, Co(III)EDTA-, U(VI)O(2) (2+), Cr(VI)O(4) (2-), and Tc(VII)O(4) (-) were studied in cultures of dissimilatory metal reducing bacteria (DMRB): Shewanella alga strain BrY, Shewanella putrefaciens strain CN32, Shewanella oneidensis strain MR-1, and Geobacter metallireducens strain GS-15. Reduction rates were metal specific with the following rate trend: Fe(III)citrate > or = Fe(III)NTA > Co(III)EDTA- > UO(2)(2+) > CrO(4)(2-) > TcO(4)(-), except for CrO(4) (2-) when H(2) was used as electron donor. The metal reduction rates were also electron donor dependent with faster rates observed for H(2) than lactate- for all Shewanella species despite higher initial lactate (10 mM) than H2 (0.48 mM). The bioreduction of CrO(4) (2-) was anomalously slower compared to the other metals with H(2) as an electron donor relative to lactate and reduction ceased before all the CrO(4)(2-) had been reduced. Transmission electron microscopic (TEM) and energy-dispersive spectroscopic (EDS) analyses performed on selected solids at experiment termination found precipitates of reduced U and Tc in association with the outer cell membrane and in the periplasm of the bacteria. The kinetic rates of metal reduction were correlated with the precipitation of reduced metal phases and their causal relationship discussed. The experimental rate data were well described by a Monod kinetic expression with respect to the electron acceptor for all metals except CrO(4)(2-), for which the Monod model had to be modified to account for incomplete reduction. However, the Monod models became statistically over-parameterized, resulting in large uncertainties of their parameters. A first-order approximation to the Monod model also effectively described the experimental results, but the rate coefficients exhibited far less uncertainty. The more precise rate coefficients of the first-order model provided a better means than the Monod parameters, to quantitatively compare the reduction rates between metals, electron donors, and DMRB species.     

Reaction profile of the last step in cytochrome P-450 catalysis revealed by studies of model complexes

 A series of oxoiron(IV) porphyrin cation radical complexes was investigated as compound I analogs of cytochrome P-450. Both the spectroscopic features and the reactivities of the complexes in oxygen atom transfer to olefins were examined as a function of only one variable, the axial ligand trans to the oxoiron(IV) bond. The results disclosed two important kinetic steps – electron transfer from olefin to oxoiron(IV) and intramolecular electron transfer from metal to porphyrin radical – which are affected differently by the axial ligands. The large kinetic barrier of the latter step in the reaction of olefins with the perchlorato-bound oxoiron(IV) porphyrin cation radical complex enabled the trapping of a reaction intermediate in which the metal, but not the porphyrin radical, is reduced. The first electron transfer step is probably followed by σ-bond formation, which readily accounts for formation of isomerized organic products at low temperatures. It is finally postulated that part of the enhanced oxygenation activities of cytochrome P-450 monooxygenases and chloroperoxidases is due to a lowering of the energy barrier for the second electron transfer step via participation of their redox-active cysteinate ligand. Received: 16 January 1997 / Accepted: 24 May 1997     

One-electron photooxidation of porphyrins at low temperature

The π-cation radicals of the metalloporphyrins magnesium octaethylporphyrin (MgOEP), magnesium tetraphenylporphyrin (MgTPP), and zinc tetraphenylporphyrin (ZnTPP), as well as the free base porphyrins of tetratolylporphyrin (H₂TTP) and tetraphenylporphyrin (H₂TPP) have been formed at liquid nitrogen temperatures in a rigid matrix of alkyl chloride glasses containing CCl₄ or 1,1,2,2-tetrachloroethane (TCE), following photolysis of the porphyrins with visible light. The reaction proceeds via electron transfer from the photoexcited porphyrin to the solvent molecules; the efficiency of thie electron transfer may be qualitatively evaluated in terms of electron tunneling in the solid matrices. This is the first report of the photochemical formation of a free base porphyrin π-cation radical species.     

Synthesis and selective tumor targeting properties of water soluble porphyrin-Pt(II) conjugates

We have designed and synthesized a series of novel water soluble porphyrins and their platinum(II) conjugates, cis-[(Por)Pt(dmso)X], where Por=5-(4-pyridyl)-10,15,20-tris(4-sulfonatophenyl)porphyrin) (PyTPPS) or 5-[4-(3-aminopropyl)pyridiniumyl]-10,15,20-tris(4-sulphonatophenyl)porphyrin (PyTPPS-NPn), X=2Cl, 1,1-cyclobutanedicarboxylic acid, oxalate, or malonate. Their biodistribution in tumor bearing mouse was examined along with their antitumor activity against murine leukemia L1210 cell line. The representative complex 1 exhibited a significant accumulation in tumor tissue with a tumor/muscle ratio of 7 after 24 h post injection. The antitumor activity of the title compounds was marginal (T/C: 95-117%), but it was found that platinum(II) coordination to the porphyrin periphery did not affect the tumor accumulating properties of the porphyrin permitting further derivatization for efficient delivery of the Pt(II) antitumor agent.     

Superb Alkaline Hydrogen Evolution and Simultaneous Electricity Generation by Pt‐Decorated Ni3N Nanosheets

The development of efficient hydrogen evolution reaction electrocatalysts is critical to the realization of clean hydrogen fuel production, while the sluggish kinetics of the Volmer‐step substantially restricts the catalyst performances in alkali electrolyzers, even for noble metal catalysts such as Pt. Here, a Pt‐decorated Ni₃N nanosheet electrocatalyst is developed to achieve a top performance of hydrogen evolution in alkaline conditions. Possessing a high metallic conductivity and an atomic‐thin semiconducting hydroxide surface, the Ni₃N nanosheets serve as not only an efficient electron pathway without the hindrance of Schottky barriers, but also provide abundant active sites for water dissociation and generation of hydrogen intermediates, which are further adsorbed on the Pt surface to recombine to H₂. The Pt‐decorated Ni₃N nanosheet catalyst exhibits a hydrogen evolution current density of 200 mA cm^?2 at an overpotential of 160 mV versus reversible hydrogen electrode, a Tafel slope of ≈36.5 mV dec^?1, and excellent stability of 82.5% current retention after 24 h of operation. Moreover, a hybrid cell consisting of a Pt‐decorated Ni₃N nanosheet cathode and a Li‐metal anode is assembled to achieve simultaneous hydrogen evolution and electricity generation, exhibiting >60 h long‐term hydrogen evolution reaction stability and an output voltage ranging from 1.3 to 2.2 V.