Conformational changes of a viral capsid protein. Thermodynamic rationale for proteolytic regulation of bacteriophage T4 capsid expansion, co-operativity, and super-stabilization by soc binding.

We have used differential scanning calorimetry in conjunction with cryo-electron microscopy to investigate the conformational transitions undergone by the maturing capsid of phage T4. Its precursor shell is composed primarily of gp23 (521 residues): cleavage of gp23 to gp23* (residues 66 to 521) facilitates a concerted conformational change in which the particle expands substantially, and is greatly stabilized. We have now characterized the intermediate states of capsid maturation; namely, the cleaved/unexpanded, state, which denatures at tm = 60 degrees C, and the uncleaved/expanded state, for which tm = 70 degrees C. When compared with the precursor uncleaved/unexpanded state (tm = 65 degrees C), and the mature cleaved/expanded state (tm = 83 degrees C, if complete cleavage precedes expansion), it follows that expansion of the cleaved precursor (delta tm approximately +23 degrees C) is the major stabilizing event in capsid maturation. These observations also suggest an advantage conferred by capsid protein cleavage (some other phage capsids expand without cleavage): if the gp23-delta domains (residues 1 to 65) are not removed by proteolysis, they impede formation of the stablest possible bonding arrangement when expansion occurs, most likely by becoming trapped at the interface between neighboring subunits or capsomers. Icosahedral capsids denature at essentially the same temperatures as tubular polymorphic variants (polyheads) for the same state of the surface lattice. However, the thermal transitions of capsids are considerably sharper, i.e. more co-operative, than those of polyheads, which we attribute to capsids being closed, not open-ended. In both cases, binding of the accessory protein soc around the threefold sites on the outer surface of the expanded surface lattice results in a substantial further stabilization (delta tm = +5 degrees C). The interfaces between capsomers appear to be relatively weak points that are reinforced by clamp-like binding of soc. These results imply that the "triplex" proteins of other viruses (their structural counterparts of soc) are likely also to be involved in capsid stabilization. Cryo-electron microscopy was used to make conclusive interpretations of endotherms in terms of denaturation events. These data also revealed that the cleaved/unexpanded capsid has an angular polyhedral morphology and has a pronounced relief on its outer surface. Moreover, it is 14% smaller in linear dimensions than the cleaved/expanded capsid, and its shell is commensurately thicker.     

The maturation-dependent conformational change of the major capsid protein of bacteriophage T4 involves a substantial change in secondary structure

We have investigated the conformational basis of the expansion transformation that occurs upon maturation of the bacteriophage T4 prohead, by using laser Raman spectroscopy to determine the secondary structure of the major capsid protein in both the precursor and the mature states of the surface lattice. This transformation involves major changes in the physical, chemical, and immunological properties of the capsid and is preceded in vivo by processing of its major protein, gp23 (56 kDa), to gp23* (49 kDa), by proteolysis of its N-terminal gp23-delta domain. The respective secondary structures of gp23 in the unexpanded state, and of gp23* in the expanded state, were determined from the laser Raman spectra of polyheads, tubular polymorphic variants of the capsid. Similar measurements were also made on uncleaved polyheads that had been expanded in vitro and, for reference, on thermally denatured polyheads. We find that, with or without cleavage of gp23, expansion is accompanied by substantial changes in secondary structure, involving a major reduction in alpha-helix content and an increase in beta-sheet. The beta-sheet contents of gp23* or gp23 in the expanded state of the surface lattice, and even of gp23 in the unexpanded state, are sufficient for a domain with the "jellyroll" fold of antiparallel beta-sheets, previously detected in the capsid proteins of other icosahedral viruses.(ABSTRACT TRUNCATED AT 250 WORDS)     

The maturation-dependent conformational change of phage T4 capsid involves the translocation of specific epitopes between the inner and the outer capsid surfaces

After polymerization of the phage T4 prohead is complete, its capsid expands by approximately 16%, is greatly stabilized, and acquires the capacity to bind accessory proteins. These effects are manifestations of a large-scale, irreversible, conformational change undergone by the major capsid protein, gp23 (521 residues) which is cleaved to gp23* (residues 66-521) during this maturation process. In order to explore its structural basis, we have performed immunoelectron microscopy with antibodies raised against synthetic peptides that correspond to precisely defined segments of the amino acid sequence of gp23. These antibodies were used to label purified polyheads (tubular polymorphic variants of the normal icosahedral capsid), in experiments designed to impose constraints on the possible foldings of the gp23/gp23* polypeptide chains in their successive conformational states. Peptide 1 (residues 48-57), part of the gp23-delta domain that is excised when gp23 is converted to gp23*, resides on the inner surface of the precursor surface lattice, but--if not proteolyzed--is found on the outer surface of the mature surface lattice. Peptide 2 (residues 65-73), immediately distal to the cleavage site, is located on the inside of the precursor surface lattice, and remains there subsequent to expansion. Peptide 3 (residues 139-146) is translocated in the opposite direction from peptide 1, i.e., from the outer to the inner surface upon expansion; moreover, expansion greatly increases the polyheads' affinity for these antibodies. Peptide 5 (residues 301-308) is located on the inside in both the precursor and the mature states. Taking into account data from other sources, these observations imply that the conformational change that underlies capsid expansion involves a radical reorganization of the proteins' structure, in which at least three distinct epitopes, situated in widely differing parts of the polypeptide chain, are translocated from one side to the other. Moreover, the amino-terminal portion of gp23/gp23*, around the cleavage site, is particularly affected.     

Specific labeling of protein domains with antibody fragments

Monovalent antibody Fab fragments, prepared from antisera raised against two different types of crystalline arrays made of either intact, or a proteolytic fragment of bacteriophage T4 major capsid protein, gp23*, were employed to stoichiometrically label different gp23* protein domains on the outer surface of a tubular variant (i.e., "polyheads") of bacteriophage T4 capsids. Computer filtrations of both negatively stained and freeze-dried/metal-shadowed specimens permitted approximate mapping of the Fab binding sites within the capsomere of the polyheads.     

Proteolysis of the major capsid protein T4 bacteriophage polyheads limited by quaternary structure.

Bacteriophage T4 carrying an amber mutation in gene 22 plus an amber mutation in gene 21 form aberrant, tubular structures termed rough polyheads, instead of complete phage when they infect Escherichia coli B. These rough polyheads consist almost entirely of the major capsid protein in its uncleaved form (gp23). When rough polyheads are treated under mild conditions with any of the five proteases, trypsin, chymotrypsin, thermolysin, pronase, or the protease from Staphylococcus aureus V8, the gp23 is rapidly hydrolyzed at a limited number of peptide bonds. In contrast, cleaved capsid protein (gp23) in mature phage capsids is completely resistant to proteolysis under the same conditions. A major project in this laboratory requires determining the primary structure of gp23, a large protein (Mr = 58,000) quite rich in those amino acids at which cleavages are achieved by conventional means. Recovery of peptides from the complex mixtures resulting from such cleavages proved to be extremely difficult. The limited proteolysis of gp23 in rough polyheads had yielded a set of large, easily purified fragments which are greatly simplifying the task of determining the primary structure of this protein.     

Structure of T4 polyheads: II. A pathway of polyhead transformations as a model for T4 capsid maturation

We have studied the aberrant tubular polyheads of bacteriophages T4D and T2L as a model system for capsid maturation. Six different types of polyhead surface lattice morphology, and the corresponding protein compositions are reported and discussed. Using in vitro systems to induce transformations between particular polyhead types, we have deduced that the structural classes represent successive points in a transitional pathway. In the first step, coarse polyheads (analogous to the prohead τ-particle) are proteolytically cleaved by a phagecoded protease, a fragment of the gene 21 product. This cleavage of P23 to P23¹ induces a co-operative lattice transformation in the protein of the surface shell, to a conformation equivalent to that of T2L giant phage capsids. These polyheads (derived either from T4 or T2L lysates) can accept further T4-coded proteins. In doing so, they pass through intermediate structural states, eventually reaching an end point whose unit cell morphology is indistinguishable from that of the giant T4 capsids. At least one protein (called soc (Ishii & Yanagida, 1975)) is bound stoichiometrically to P23¹ in the end-state conformation. The simulation of several aspects of capsid maturation (cleavage of P23 to P23¹, stabilization, and lattice expansion) in the polyhead pathway suggest that it parallels the major events of phage T-even capsid maturation, decoupled from any involvement of DNA packaging.     

Phage display of intact domains at high copy number: a system based on SOC, the small outer capsid protein of bacteriophage T4.

Peptides fused to the coat proteins of filamentous phages have found widespread applications in antigen display, the construction of antibody libraries, and biopanning. However, such systems are limited in terms of the size and number of the peptides that may be incorporated without compromising the fusion proteins' capacity to self-assemble. We describe here a system in which the molecules to be displayed are bound to pre-assembled polymers. The polymers are T4 capsids and polyheads (tubular capsid variants) and the display molecules are derivatives of the dispensable capsid protein SOC. In one implementation, SOC and its fusion derivatives are expressed at high levels in Escherichia coli, purified in high yield, and then bound in vitro to separately isolated polyheads. In the other, a positive selection vector forces integration of the modified soc gene into a soc-deleted T4 genome, leading to in vivo binding of the display protein to progeny virions. The system is demonstrated as applied to C-terminal fusions to SOC of (1) a tetrapeptide; (2) the 43-residue V3 loop domain of gp120, the human immunodeficiency virus type-1 (HIV-1) envelope glycoprotein; and (3) poliovirus VP1 capsid protein (312 residues). SOC-V3 displaying phage were highly antigenic in mice and produced antibodies reactive with native gp120. That the fusion protein binds correctly to the surface lattice was attested in averaged electron micrographs of polyheads. The SOC display system is capable of presenting up to approximately 10(3) copies per capsid and > 10(4) copies per polyhead of V3-sized domains. Phage displaying SOC-VP1 were isolated from a 1:10(6) mixture by two cycles of a simple biopanning procedure, indicating that proteins of at least 35 kDa may be accommodated.     

Repetitive versus monomeric antigen presentation: direct visualization of antibody affinity and specificity

The concept of presenting antigens in a repetitive array to obtain high titers of specific antibodies is increasingly applied by using surface-engineered viruses or bacterial envelopes as novel vaccines. A case for this concept was made 25 years ago, when producing high-titer antisera against ordered arrays of gp23, the major capsid protein of bacteriophage T4 (Aebi et al., Proc. Natl. Acad. Sci. USA, 74 (1977) 5514-5518). In view of the current interest in this concept we thought it useful to employ this system to directly visualize the dependence of antibody affinity and specificity on antigen presentation. We compared antibodies raised against T4 polyheads, a tubular variant of the bacteriophage T4 capsid, which have gp23 hexamers arranged in a crystalline lattice (gp23(repetitive)), with those raised against the hexameric gp23 subunits (gp23(monomeric)). The labeling patterns of Fab-fragments prepared from these antibodies when bound to polyheads were determined by electron microscopy and image enhancement. Anti-gp23(repetitive) bound in a monospecific, stoichiometric fashion to the gp23 units constituting the polyhead surface. In contrast, anti-gp23(monomeric) decorated the polyhead surface randomly and with a 40-fold lower occupancy. These results concur with the difference in titers established by ELISA for the antisera against the repetitively displayed form of antigen (anti-gp23(repetitive)) and the randomly presented antigen (gp23(monomeric)), and they constitute a compelling visual documentation of the concept of repetitive antigen presentation to elicite a serotype-like immune response.     

Correlation between structural transformation and cleavage of the major head protein of T4 bacteriophage

We have studied the maturation of T4 polyheads, the aberrant tubular structures related to the capsid of T4 bacteriophage. Conditions have been found under which more than 95% of the major head protein (P23) undergoes the same cleavage that occurs during development of the normal capsid. The concomitant structural changes in the polyheads have been followed using electron microscope image filtering techniques. As a result of the cleavage, a radical transformation of the hexagonal lattice occurs, Involving a 10–15% expansion in the lattice dimensions. However, a metastable intermediate state similar to the uncleaved structure has been observed immediately after cleavage of the protein subunits. Some kind of additional physical stimulus seems to be required to trigger the major structural change, which appears to be highly cooperative.     

Chaperonin-mediated folding of bacteriophage T4 major capsid protein. II. Production of gene product 23 deletion mutants

Folding of bacteriophage T4 major capsid protein, gene product 23 (534 a.a.), is aided by two proteins: E. coli GroEL chaperonin and viral gp31 co-chaperonin. In the present work a set of mutants with extensive deletions inside gene 23 using controlled digestion with Bal31 nuclease has been constructed. Proteins with deletions were co-expressed from plasmid vectors with phage gp31 co-chaperonin. Deletions from 8 to 33 a.a. in the N-terminal region of the gp23 molecule covering the protein proteolytic cleavage site during capsid maturation have no influence on the mutants' ability to produce in E. coli cells proteins which form regular structures—polyheads. Deletions in other regions of the polypeptide chain (187-203 and 367-476 a.a.) disturb the correct folding and subsequent assembly of gp23 into polyheads.     

Structural changes during the transformation of bacteriophage T4 polyheads: II. Evidence that a conformational change in the major capsid protein precedes the expansion

The shell of the bacteriophage T4 prehead is transformed after the maturation cleavages from a fragile to a highly chemically resistant structure. A “cleaved but anchored” shell, in which the capsid protein has been cleaved but expansion to the mature structure has not yet occurred, is thought to be an intermediate in the transformation. We have compared native, trypsinized, temperature-sensitive mutant, and cleaved but anchored polyheads for differences and similarities in their capsomeres. Our results show that the altered capsomeres of the cleaved but anchored state must be attributed to a conformational change in the subunits, and not simply to the loss of the amino-terminal peptide by proteolysis.     

Head maturation pathway of bacteriophages T4 and T2. IV. In vitro transformation of T4 head-related particles produced by mutants in gene 17 to capsid-like structures

T4 mutants in gene 17 accumulate particles which contain the main head protein in the cleaved form (gp23*) arranged in an unexpanded lattice (empty small particles), together with other expanded capsids (empty large particles). The isolated empty small particles can be transformed in vitro, by lowering the ionic strength, to capsid-like structures. This structural transformaton is not coupled to chemical modification of the structural proteins of the empty small particles. In contrast to unexpanded particles that are easily dissociated, the transformed structures are as resistant to dissociation as other T-even head-related particles with expanded lattice. Furthermore, the transformed particles are able to bind in vitro hoc and soc proteins, rendering capsids indistinguishable from the normal T4 capsids both morphologically and by their stability against denaturing agents. Our results indicate that the in vitro transformation of the empty small particles might mimic important and characteristic aspects of the in vivo maturation of T4 heads, thus suggesting a possible role of the "cleaved but unexpanded" particle in the maturation pathway of the T4 shell.     

Cryo-EM structure of a bacteriophage T4 gp24 bypass mutant: the evolution of pentameric vertex proteins in icosahedral viruses

Many large viral capsids require special pentameric proteins at their fivefold vertices. Nevertheless, deletion of the special vertex protein gene product 24 (gp24) in bacteriophage T4 can be compensated by mutations in the homologous major capsid protein gp23. The structure of such a mutant virus, determined by cryo-electron microscopy to 26 angstroms, shows that the gp24 pentamers are replaced by mutant major capsid protein (gp23) pentamers at the vertices, thus re-creating a viral capsid prior to the evolution of specialized major capsid proteins and vertex proteins. The mutant gp23* pentamer is structurally similar to the wild-type gp24* pentamer but the insertion domain is slightly more distant from the gp23* pentamer center. There are additional SOC molecules around the gp23* pentamers in the mutant virus that were not present around the gp24* pentamers in the wild-type virus.     

Co-expression of gene 31 and 23 products of bacteriophage T4

Folding of the major capsid protein of bacteriophage T4 encoded by gene 23 is aided by Escherichia coli GroEL chaperonin and phage co-chaperonin gp31. In the absence of gene product (gp) 31, aggregates of recombinant gp23 accumulate in the cell similar to inclusion bodies. These aggregates can be solubilized with 6 M urea. However, the protein cannot form regular structures in solution. A system of co-expression of gp31 and gp23 under the control of phage T7 promoter in E. coli cells has been constructed. Folding of entire-length gp23 (534 amino acid residues) in this system results in the correctly folded recombinant gp23, which forms long regular structures (polyheads) in the cell.     

The Collagen-like Protein gp12 Is a Temperature-dependent Reversible Binder of SPP1 Viral Capsids

Icosahedral capsids of viruses are lattices of defined geometry and homogeneous size. The (quasi-)equivalent organization of their protein building blocks provides, in numerous systems, the binding sites to assemble arrays of viral polypeptides organized with nanometer precision that protrude from the capsid surface. The capsid of bacterial virus (bacteriophage) SPP1 exposes, at its surface, the 6.6-kDa viral polypeptide gp12 that binds to the center of hexamers of the major capsid protein. Gp12 forms an elongated trimer with collagen-like properties. This is consistent with the fold of eight internal GXY repeats of gp12 to build a stable intersubunit triple helix in a prokaryotic setting. The trimer dissociates and unfolds at near physiological temperatures, as reported for eukaryotic collagen. Its structural organization is reacquired within seconds upon cooling. Interaction with the SPP1 capsid hexamers strongly stabilizes gp12, increasing its T_m to 54 °C. Above this temperature, gp12 dissociates from its binding sites and unfolds reversibly. Multivalent binding of gp12 trimers to the capsid is highly cooperative. The capsid lattice also provides a platform to assist folding and association of unfolded gp12 polypeptides. The original physicochemical properties of gp12 offer a thermoswitchable system for multivalent binding of the polypeptide to the SPP1 capsid surface.     

Membrane binding induces lipid-specific changes in the denaturation profile of bovine prothrombin. A scanning calorimetry study.

Prothrombin denaturation was examined in the presence of Na2EDTA, 5mM CaCl2, and CaCl2 plus membranes containing 1-palmitoyl-2-oleoyl-3-sn-phosphatidylcholine (POPC) in combination with either bovine brain phosphatidylserine (PS) or 1,2-dioleoyl-phosphatidylglycerol (DOPG). Heating denaturation of prothrombin produced thermograms showing two peaks, a minor one at approximately 59 degrees C previously reported to correspond to denaturation of the fragment 1 region (Ploplis, V. A., D. K. Strickland, and F. J. Castellino 1981. Biochemistry. 20:15-21), and a main one at approximately 57-58 degrees C, reportedly due to denaturation of the rest of the molecule (prethrombin 1). The main peak was insensitive to the presence of 5mM Ca2+ whereas the minor peak was shifted to higher temperature (Tm approximately 65 degrees C) by Ca2+. Sufficient concentrations of POPC/bovPS (75/25) large unilamellar vesicles to guarantee binding of 95% of prothrombin resulted in an enthalpy loss in the main endotherm and a comparable enthalpy gain in the minor endotherm accompanying an upward shift in peak temperature (Tm approximately 73 degrees C). Peak deconvolution analysis on the prothrombin denaturation profile and comparison with isolated prothrombin fragment 1 denaturation endotherms suggested that the change caused by POPC/PS vesicles reflected a shift of a portion of the enthalpy of the prethrombin 1 domain to higher temperature (Tm approximately 77 degrees C). The enthalpy associated with this high-temperature endotherm increased in proportion to the surface concentration of PS. By contrast, POPC/DOPG (50/50) membranes shifted the prethrombin 1 peak by 4 degrees C to a lower temperature and the fragment 1 peak by 5 degrees C to a higher temperature. The data lead to a hypothesis that the fragment 1 and prethrombin 1 domains of prothrombin do not denature quite independently and that binding of prothrombin to acidic-lipid membranes disrupts the interaction between these domains. It is further hypothesized that PS containing membranes exert the additional specific effect of decoupling the denaturation of two subdomains of the prethrombin 1 domain of prothrombin.     

Head maturation pathway of bacteriophages T4 and T2. V. Maturable epsilon-particle accumulating an acridine-treated bacteriophage T4-infected cells.

A maturable head-related particle of bacteriophage T4 has been identified and characterized. This epsilon-particle has the same size as the prehead, but its shell is made of the cleaved product of gene 23 (gp23*). It contains internal matter, most likely the processed core proteins, which is lost or modified by experimental manipulations. It accumulates, together with partially filled ("grizzled") heads, in T4 infected cells that are treated with 9-aminoacridine. On sections of "well-preserved" cells the epsilon-particles are not identifiable with certainty; a more or less empty breakdown product of them becomes visible when cytoplasmic leakage is induced. The number of particles per cell is then in agreement with the biochemically and with the number of particles counted in lysates. Morphologically and biochemically, the isolated epsilon-particles closely resemble the empty small particles of 17- -infected cells described in previous papers of this series. Both are composed of gp23* and are still unexpanded, so that they are not yet able to bind the minor head proteins soc and hoc. We discuss the possibility of the epsilon-particle being an intermediate on the normal T4 wild-type head maturation pathway.     

Thermal denaturation of whole cells and cell components of Escherichia coli examined by differential scanning calorimetry.

Thermograms of whole cells of Escherichia coli obtained by differential scanning calorimetry contained ten main peaks (denoted f, l, m1, m2, m3, n, p, q, r and s) occurring at temperatures of approximately 25, 54, 61, 71, 76, 81, 95, 105, 118 and 124 degrees C, respectively. After cooling to 5 degrees C and reheating, peaks denoted fr, mr and pr were observed at 23, 73 and 94 degrees C, respectively. By examining thermograms of different cell fractions we have identified the following thermal denaturation events. During primary heating there is a broad endotherm (f) beginning below 20 degrees C and extending to just above 40 degrees C that is caused by melting of membrane lipids. Superimposed on this is an exothermic process associated with a change of state of the peptidoglycan. The first irreversible denaturation event occurs just above 47 degrees C, associated with the onset of denaturation of the 30S ribosomal subunit and soluble cytoplasmic proteins. Ribosome melting is a complex process occurring between 47 and 85 degrees C and is characterized by peaks m1, m2 and n. Peak m3 at 75-76 degrees C is of unknown identity but may possibly represent melting of tRNA. Peak p at 95 degrees C results from melting of a portion of the cellular DNA combined with denaturation of a cell wall component. Peak q at 105 degrees C is multicomponent and may be caused by melting of a different region of DNA together with denaturation of another cell wall component. The complex events denoted r and s at 118 and 125 degrees C, respectively, are associated with denaturation of a component of the cell envelope, and possibly also of DNA. Following cooling and reheating there is a broad endotherm with a maximum at 23 degrees C caused by remelting of membrane lipid and a very broad endotherm extending between 40 and 100 degrees C caused by the remelting of ribosomal RNA. Peak pr at 94 degrees C is caused by the melting of reannealed DNA. Additional features not appearing in whole cells were evident in some cell fractions. These observations should allow us to distinguish events that may lead to loss of viability from those that do not.     

Role of the major capsid protein of phage T4 in DNA packaging from structure-function and site-directed mutagenesis studies

Heat cleavage of asp-pro peptide bonds was used to probe the primary structures of the Phage T4 major capsid protein precursor, gp23, its mature capsid form gp23*, and a DNA-dependent ATPase, called capsizyme. This analysis suggests that capsizyme is a gp23** resulting from the N-terminal processing found in gp23* as well as shortening at the C-terminus. Photoaffinity labeling with Azido-ATP and BrU-DNA, followed by heat cleavage, suggests binding sites for these compounds toward the C-terminus of gp23**, suggesting localization of functions within the gp23 primary sequence. Site-directed mutagenesis experiments were targeted therefore to the C-terminal end of g23 as well as to its processing sites. N-terminal processing site modification supports the consensus gp21 proteinase cleavage rule, whereas mutagenesis at the C-terminus suggests that the C-terminal alteration is unlikely to result from a gp21-morphogenesis proteinase cleavage. Amino acid replacements in gp23 at newly introduced amber sites reveal a new g23 mutant phenotype, defective partially DNA-filled heads, in support of the hypothesis that gp23 and its products function directly in the DNA packaging mechanism.     

Structural changes during the transformation of bacteriophage T4 polyheads: characterization of the initial and final states by freeze-drying and shadowing Fab-fragment-labelled preparations.

The maturation of the head of bacteriophage T4 requires a cleavage of the major capsid protein subunit, P23, and results in a transformation of the unstable prehead shell to the chemically resistant shell of the mature virion. We have studied this transformation by comparing class I and class III polyheads, which have P23 lattices which correspond to the prehead and mature head, respectively. The inner and outer surface topographies of these structures were determined from optically filtered images of freeze-dried and shadowed preparations. Individual antigenic sites were localized on the polyhead surfaces by labelling them with Fab fragments obtained from antisera raised against polyheads and against sheets composed of a fragment of the P23 molecule. We find that the transformation involves a structural change in the surface lattice which eliminates protrusions on the inside surface and produces new protrusions on the outer surface. Changes in antigenicity include at least one site which disappears from the outer surface, the unmasking of a site which appears on the outer surface, and the movement of at least one site from the inside surface to the outside during the transformation. We discuss the mechanism of the transformation in terms of the changes in tertiary and quaternary structure of the subunits required to account for the observed changes in the polyhead structure and antigenicity.