gammaepsilon Sub-complex of thermophilic ATP synthase has the ability to bind ATP

The isolated epsilon subunit of F(1)-ATPase from thermophilic Bacillus PS3 (TF(1)) binds ATP [Y. Kato-Yamada, M. Yoshida, J. Biol. Chem. 278 (2003) 36013]. The obvious question is whether the ATP binding concern with the regulation of ATP synthase activity or not. If so, the epsilon subunit even in the ATP synthase complex should have the ability to bind ATP. To check if the ATP binding to the epsilon subunit within the ATP synthase complex may occur, the gammaepsilon sub-complex of TF(1) was prepared and ATP binding was examined. The results clearly showed that the gammaepsilon sub-complex can bind ATP.     

Probing conformations of the beta subunit of F0F1-ATP synthase in catalysis

A subcomplex of F0F1-ATP synthase (F0F1), alpha3beta3gamma, was shown to undergo the conformation(s) during ATP hydrolysis in which two of the three beta subunits have the "Closed" conformation simultaneously (CC conformation) [S.P. Tsunoda, E. Muneyuki, T. Amano, M. Yoshida, H. Noji, Cross-linking of two beta subunits in the closed conformation in F1-ATPase, J. Biol. Chem. 274 (1999) 5701-5706]. This was examined by the inter-subunit disulfide cross-linking between two mutant beta(I386C)s that was formed readily only when the enzyme was in the CC conformation. Here, we adopted the same method for the holoenzyme F0F1 from Bacillus PS3 and found that the CC conformation was generated during ATP hydrolysis but barely during ATP synthesis. The experiments using F0F1 with the epsilon subunit lacking C-terminal helices further suggest that this difference is related to dynamic nature of the epsilon subunit and that ATP synthesis is accelerated when it takes the pathway involving the CC conformation.     

Proton ATPase of rat liver mitochondria: A rapid procedure for purification of a stable, reconstitutively active F1 preparation using a modified chloroform method

A method is described for the purification of rat liver F1-ATPase by a modification of the chloroform extraction procedure originally described by Beechey et al. (Biochem. J. (1975) 148, 533). Purified liver membrane vesicles are extracted with chloroform in the presence of ATP and EDTA. The procedure yields pure F1 in only 2-3 h without the necessity of ion-exchange chromatography. The enzyme exhibits the alpha, beta, gamma, delta, and epsilon bands characteristic of F1-ATPase. It has a high ATPase specific activity, and is reconstitutively active, catalyzing high rates of ATP synthesis. Significantly, it can be readily crystallized. If desired, the enzyme can be passed over a gel filtration column to place it in a stabilizing phosphate-EDTA buffer, lyophilized and stored indefinitely at -20 degrees C.     

The structure of bovine F1-ATPase inhibited by ADP and beryllium fluoride

The structure of bovine F1-ATPase inhibited with ADP and beryllium fluoride at 2.0 angstroms resolution contains two ADP.BeF3- complexes mimicking ATP, bound in the catalytic sites of the beta(TP) and beta(DP) subunits. Except for a 1 angstrom shift in the guanidinium of alphaArg373, the conformations of catalytic side chains are very similar in both sites. However, the ordered water molecule that carries out nucleophilic attack on the gamma-phosphate of ATP during hydrolysis is 2.6 angstroms from the beryllium in the beta(DP) subunit and 3.8 angstroms away in the beta(TP) subunit, strongly indicating that the beta(DP) subunit is the catalytically active conformation. In the structure of F1-ATPase with five bound ADP molecules (three in alpha-subunits, one each in the beta(TP) and beta(DP) subunits), which has also been determined, the conformation of alphaArg373 suggests that it senses the presence (or absence) of the gamma-phosphate of ATP. Two catalytic schemes are discussed concerning the various structures of bovine F1-ATPase.     

Chemomechanical Coupling in Single-Molecule F-Type ATP Synthase

An extremely small reaction chamber with a volume of a few femtoliters was developed for a highly sensitive detection of biological reaction. By encapsulating a single F(1)-ATPase (F(1)) molecule with ADP and an inorganic phosphate in the chamber, the chemomechanical coupling efficiency of ATP synthesis catalyzed by reversely rotated F(1) was successfully determined (Rondelez et al., 2005a, Nature, 444, 773-777). While the alpha3beta3gamma subcomplex of F(1) generated ATP with a low efficiency (approximately 10%), inclusion of the epsilon subunit into the subcomplex enhanced the efficiency up to 77%. This raises a new question about the mechanism of F(0)F(1)-ATP synthase (F(0)F(1)): How does the epsilon subunit support the highly coupled ATP synthesis of F(1)? To address this question, we measured the conformational dynamics of the epsilon subunit using fluorescence resonance energy transfer (FRET) at the single-molecule level. The experimental data revealed epsilon changes the conformation of its C-terminus helices in a nucleotide-dependent manner. It is plausible that the conformational change of epsilon switches the catalytic mode of F(0)F(1) for highly coupled ATP synthesis.     

Modulation of nucleotide binding to the catalytic sites of thermophilic F1-ATPase by the ε subunit: Implication for the role of the ε subunit in ATP synthesis

Effect of ε subunit on the nucleotide binding to the catalytic sites of F₁-ATPase from the thermophilic Bacillus PS3 (TF₁) has been tested by using α₃β₃γ and α₃β₃γε complexes of TF₁ containing βTyr341 to Trp substitution. The nucleotide binding was assessed with fluorescence quenching of the introduced Trp. The presence of the ε subunit weakened ADP binding to each catalytic site, especially to the highest affinity site. This effect was also observed when GDP or IDP was used. The ratio of the affinity of the lowest to the highest nucleotide binding sites had changed two orders of magnitude by the ε subunit. The differences may relate to the energy required for the binding change in the ATP synthesis reaction and contribute to the efficient ATP synthesis.     

Characterization of the relationship between ADP- and epsilon-induced inhibition in cyanobacterial F1-ATPase

The ATPase activity of chloroplast and bacterial F(1)-ATPase is strongly inhibited by both the endogenous inhibitor ε and tightly bound ADP. Although the physiological significance of these inhibitory mechanisms is not very well known for the membrane-bound F(0)F(1), these are very likely to be important in avoiding the futile ATP hydrolysis reaction and ensuring efficient ATP synthesis in vivo. In a previous study using the α(3)β(3)γ complex of F(1) obtained from the thermophilic cyanobacteria, Thermosynechococcus elongatus BP-1, we succeeded in determining the discrete stop position, ～80° forward from the pause position for ATP binding, caused by ε-induced inhibition (ε-inhibition) during γ rotation (Konno, H., Murakami-Fuse, T., Fujii, F., Koyama, F., Ueoka-Nakanishi, H., Pack, C. G., Kinjo, M., and Hisabori, T. (2006) EMBO J. 25, 4596-4604). Because γ in ADP-inhibited F(1) also pauses at the same position, ADP-induced inhibition (ADP-inhibition) was assumed to be linked to ε-inhibition. However, ADP-inhibition and ε-inhibition should be independent phenomena from each other because the ATPase core complex, α(3)β(3)γ, also lapses into the ADP-inhibition state. By way of thorough biophysical and biochemical analyses, we determined that the ε subunit inhibition mechanism does not directly correlate with ADP-inhibition. We suggest here that the cyanobacterial ATP synthase ε subunit carries out an important regulatory role in acting as an independent "braking system" for the physiologically unfavorable ATP hydrolysis reaction.     

Mechanically driven proton conduction in single delta-free F0F1-ATPase

In order to observe mechanically driven proton flux in F(0)F(1)-ATPase coupled with artificial driven rotation on F(1) simultaneously, a double channel observation system was established. An artificial delta-free F(0)F(1)-ATPase was constructed with alpha(3), beta(3), epsilon, gamma, and c(n) subunits as rotator and a, b(2) as stator. The chromatophore was immobilized on the glass surface through biotin-streptavidin-biotin system, and the magnetic bead was attached to the beta subunit of delta-free F(0)F(1)-ATPase. The mechanically driven proton flux was indicated by the fluorescence intensity change of fluorescein reference standard (F1300) and recorded by a cooled digital CCD camera. The mechanochemical coupling stoichiometry between F(0) and F(1) is about 4.15 +/- 0.2H(+)/rev when the magnetic field rotated at 0.33 Hz (rps).     

Isolated epsilon subunit of thermophilic F1-ATPase binds ATP

F1-ATPase, a soluble part of the F0F1-ATP synthase, has subunit structure alpha3beta3gammadeltaepsilon in which nucleotide-binding sites are located in the alpha and beta subunits and, as believed, in none of the other subunits. However, we report here that the isolated epsilon subunit of F1-ATPase from thermophilic Bacillus strain PS3 can bind ATP. The binding was directly demonstrated by isolating the epsilon subunit-ATP complex with gel filtration chromatography. The binding was not dependent on Mg2+ but was highly specific for ATP; however, ADP, GTP, UTP, and CTP failed to bind. The epsilon subunit lacking the C-terminal helical hairpin was unable to bind ATP. Although ATP binding to the isolated epsilon subunits from other organisms has not been detected under the same conditions, a possibility emerges that the epsilon subunit acts as a built in cellular ATP level sensor of F0F1-ATP synthase.     

Temperature-sensitive reaction intermediate of F1-ATPase

F(1)-ATPase is a rotary molecular motor that makes 120 degrees stepping rotations, with each step being driven by a single-ATP hydrolysis. In this study, a new reaction intermediate of F(1)-ATPase was discovered at a temperature below 4 degrees C, which makes a pause at the same angle in its rotation as when ATP binds. The rate constant of the intermediate reaction was strongly dependent on temperature with a Q(10) factor of 19, implying that the intermediate reaction accompanies a large conformational change. Kinetic analyses showed that the intermediate state does not correspond to ATP binding or hydrolysis. The addition of ADP to the reaction mixture did not alter the angular position of the intermediate state, but specifically lengthened the time constant of this state. Conversely, the addition of inorganic phosphate caused a pause at an angle of +80 degrees from that of the intermediate state. These observations strongly suggest that the newly found reaction intermediate is an ADP-releasing step.     

Significance of the epsilon subunit in the thiol modulation of chloroplast ATP synthase

To understand the regulatory function of the gamma and epsilon subunits of chloroplast ATP synthase in the membrane integrated complex, we constructed a chimeric FoF1 complex of thermophilic bacteria. When a part of the chloroplast F1 gamma subunit was introduced into the bacterial FoF1 complex, the inverted membrane vesicles with this chimeric FoF1 did not exhibit the redox sensitive ATP hydrolysis activity, which is a common property of the chloroplast ATP synthase. However, when the whole part or the C-terminal alpha-helices region of the epsilon subunit was substituted with the corresponding region from CF1-epsilon together with the mutation of gamma, the redox regulation property emerged. In contrast, ATP synthesis activity did not become redox sensitive even if both the regulatory region of CF1-gamma and the entire epsilon subunit from CF1 were introduced. These results provide important features for the regulation of FoF1 by these subunits: (1) the interaction between gamma and epsilon is important for the redox regulation of FoF1 complex by the gamma subunit, and (2) a certain structural matching between these regulatory subunits and the catalytic core of the enzyme must be required to confer the complete redox regulation mechanism to the bacterial FoF1. In addition, a structural requirement for the redox regulation of ATP hydrolysis activity might be different from that for the ATP synthesis activity.     

A normal mode analysis of structural plasticity in the biomolecular motor F(1)-ATPase

Normal modes have been used to explore the inherent flexibility of the alpha, beta and gamma subunits of F(1)-ATPase in isolation and as part of the alpha(3)beta(3)gamma complex. It was found that the structural plasticity of the gamma and beta subunits, in particular, correlates with their functions. The N and C-terminal helices forming the coiled-coil domain of the gamma subunit are highly flexible in the isolated subunit, but more rigid in the alpha(3)beta(3)gamma complex due to interactions with other subunits. The globular domain of the gamma subunit is structurally relatively rigid when isolated and in the alpha(3)beta(3)gamma complex; this is important for its functional role in coupling the F(0) and F(1) complex of ATP synthase and in inducing the conformational changes of the beta subunits in synthesis. Most important, the character of the lowest-frequency modes of the beta(E) subunit is highly correlated with the large beta(E) --> beta(TP) transition. This holds for the C-terminal domain and the nucleotide-binding domain, which undergo significant conformational transitions in the functional cycle of F(1)-ATPase. This is most evident in the ligand-free beta(E) subunit; the flexibility in the nucleotide-binding domain is reduced somewhat in the beta(TP) subunit in the presence of Mg(2+).ATP. The low-frequency modes of the alpha(3)beta(3)gamma complex show that the motions of the globular domain of the gamma subunit and of the C-terminal and nucleotide binding domains of the beta(E) subunits are coupled, in accord with their function. Overall, the normal mode analysis reveals that F(1)-ATPase, like other macromolecular assemblies, has the intrinsic structural flexibility required for its function encoded in its sequence and three-dimensional structure. This inherent plasticity is an essential aspect of assuring a small free energy cost for the large-scale conformational transition that occurs in molecular motors.     

ATP binding and hydrolysis steps of the uni-site catalysis by the mitochondrial F1-ATPase are affected by inorganic phosphate

The effect of inorganic phosphate (P_i) on uni-site ATP binding and hydrolysis by the nucleotide-depleted F₁-ATPase from beef heart mitochondria (ndMF₁) has been investigated. It is shown for the first time that P_i decreases the apparent rate constant of uni-site ATP binding by ndMF₁ 3-fold with the K_d of 0.38 ± 0.14 mM. During uni-site ATP hydrolysis, P_i also shifts equilibrium between bound ATP and ADP + P_i in the direction of ATP synthesis with the K_d of 0.17 ± 0.03 mM. However, 10 mM P_i does not significantly affect ATP binding during multi-site catalysis.     

Acceleration of the ATP-binding rate of F1-ATPase by forcible forward rotation

F₁-ATPase (F₁) is a reversible ATP-driven rotary motor protein. When its rotary shaft is reversely rotated, F₁ produces ATP against the chemical potential of ATP hydrolysis, suggesting that F₁ modulates the rate constants and equilibriums of catalytic reaction steps depending on the rotary angle of the shaft. Although the chemomechanical coupling scheme of F₁ has been determined, it is unclear how individual catalytic reaction steps depend on its rotary angle. Here, we report direct evidence that the ATP-binding rate of F₁ increases upon the forward rotation of the rotor, and its binding affinity to ATP is enhanced by rotation.     

Modulation of nucleotide specificity of thermophilic F(o)F(1)-ATP Synthase by epsilon-subunit

The C-terminal two α-helices of the ε-subunit of thermophilic Bacillus F(o)F(1)-ATP synthase (TF(o)F(1)) adopt two conformations: an extended long arm ("up-state") and a retracted hairpin ("down-state"). As ATP becomes poor, ε changes the conformation from the down-state to the up-state and suppresses further ATP hydrolysis. Using TF(o)F(1) expressed in Escherichia coli, we compared TF(o)F(1) with up- and down-state ε in the NTP (ATP, GTP, UTP, and CTP) synthesis reactions. TF(o)F(1) with the up-state ε was achieved by inclusion of hexokinase in the assay and TF(o)F(1) with the down-state ε was represented by εΔc-TF(o)F(1), in which ε lacks C-terminal helices and hence cannot adopt the up-state under any conditions. The results indicate that TF(o)F(1) with the down-state ε synthesizes GTP at the same rate of ATP, whereas TF(o)F(1) with the up-state ε synthesizes GTP at a half-rate. Though rates are slow, TF(o)F(1) with the down-state ε even catalyzes UTP and CTP synthesis. Authentic TF(o)F(1) from Bacillus cells also synthesizes ATP and GTP at the same rate in the presence of adenosine 5'-(β,γ-imino)triphosphate (AMP-PNP), an ATP analogue that has been known to stabilize the down-state. NTP hydrolysis and NTP-driven proton pumping activity of εΔc-TF(o)F(1) suggests similar modulation of nucleotide specificity in NTP hydrolysis. Thus, depending on its conformation, ε-subunit modulates substrate specificity of TF(o)F(1).     

Stochastic rotational catalysis of proton pumping F-ATPase

F-ATPases synthesize ATP from ADP and phosphate coupled with an electrochemical proton gradient in bacterial or mitochondrial membranes and can hydrolyse ATP to form the gradient. F-ATPases consist of a catalytic F1 and proton channel F0 formed from the alpha3beta3gammadelta and ab2c10 subunit complexes, respectively. The rotation of gammaepsilonc10 couples catalyses and proton transport. Consistent with the threefold symmetry of the alpha3beta3 catalytic hexamer, 120 degrees stepped revolution has been observed, each step being divided into two substeps. The ATP-dependent revolution exhibited stochastic fluctuation and was driven by conformation transmission of the beta subunit (phosphate-binding P-loop/alpha-helix B/loop/beta-sheet4). Recent results regarding mechanically driven ATP synthesis finally proved the role of rotation in energy coupling.     

Biochemical and electron microscopic characterization of the F1F0 ATP synthase from the hyperthermophilic eubacterium Aquifex aeolicus

The F(1)F(0) ATP synthase has been purified from the hyperthermophilic eubacterium Aquifex aeolicus and characterized. Its subunits have been identified by MALDI-mass spectrometry through peptide mass fingerprinting and MS/MS. It contains the canonical subunits alpha, beta, gamma, delta and epsilon of F(1) and subunits a and c of F(0). Two versions of the b subunit were found, which show a low sequence homology to each other. Most likely they form a heterodimer. An electron microscopic single particle analysis revealed clear structural details, including two stalks connecting F(1) and F(0). In several orientations the central stalk appears to be tilted and/or kinked. It is unclear whether there is a direct connection between the peripheral stalk and the delta subunit.     

Epsilon subunit, an endogenous inhibitor of bacterial F(1)-ATPase, also inhibits F(0)F(1)-ATPase

Since the report by Sternweis and Smith (Sternweis, P. C., and Smith, J. B. (1980) Biochemistry 19, 526-531), the epsilon subunit, an endogenous inhibitor of bacterial F(1)-ATPase, has long been thought not to inhibit activity of the holo-enzyme, F(0)F(1)-ATPase. However, we report here that the epsilon subunit is exerting inhibition in F(0)F(1)-ATPase. We prepared a C-terminal half-truncated epsilon subunit (epsilon(DeltaC)) of the thermophilic Bacillus PS3 F(0)F(1)-ATPase and reconstituted F(1)- and F(0)F(1)-ATPase containing epsilon(DeltaC). Compared with F(1)- and F(0)F(1)-ATPase containing intact epsilon, those containing epsilon(DeltaC) showed uninhibited activity; severalfold higher rate of ATP hydrolysis at low ATP concentration and the start of ATP hydrolysis without an initial lag at high ATP concentration. The F(0)F(1)-ATPase containing epsilon(DeltaC) was capable of ATP-driven H(+) pumping. The time-course of pumping at low ATP concentration was faster than that by the F(0)F(1)-ATPase containing intact epsilon. Thus, the comparison with noninhibitory epsilon(DeltaC) mutant shed light on the inhibitory role of the intact epsilon subunit in F(0)F(1)-ATPase.     

Role of the epsilon subunit of thermophilic F1-ATPase as a sensor for ATP

The epsilon subunit of F(1)-ATPase from the thermophilic Bacillus PS3 (TF(1)) has been shown to bind ATP. The precise nature of the regulatory role of ATP binding to the epsilon subunit remains to be determined. To address this question, 11 mutants of the epsilon subunit were prepared, in which one of the basic or acidic residues was substituted with alanine. ATP binding to these mutants was tested by gel-filtration chromatography. Among them, four mutants that showed no ATP binding were selected and reconstituted with the alpha(3)beta(3)gamma complex of TF(1). The ATPase activity of the resulting alpha(3)beta(3)gammaepsilon complexes was measured, and the extent of inhibition by the mutant epsilon subunits was compared in each case. With one exception, weaker binding of ATP correlated with greater inhibition of ATPase activity. These results clearly indicate that ATP binding to the epsilon subunit plays a regulatory role and that ATP binding may stabilize the ATPase-active form of TF(1) by fixing the epsilon subunit into the folded conformation.     

Regulatory proteins of F1F0-ATPase: Role of ATPase inhibitor

An intrinsic ATPase inhibitor inhibits the ATP-hydrolyzing activity of mitochondrial F₁F₀-ATPase and is released from its binding site on the enzyme upon energization of mitochondrial membranes to allow phosphorylation of ADP. The mitochondrial activity to synthesize ATP is not influenced by the absence of the inhibitor protein. The enzyme activity to hydrolyze ATP is induced by dissipation of the membrane potential in the absence of the inhibitor. Thus, the inhibitor is not responsible for oxidative phosphorylation, but acts only to inhibit ATP hydrolysis by F₁F₀-ATPase upon deenergization of mitochondrial membranes. The inhibitor protein forms a regulatory complex with two stabilizing factors, 9K and 15K proteins, which facilitate the binding of the inhibitor to F₁F₀-ATPase and stabilize the resultant inactivated enzyme. The 9K protein, having a sequence very similar to the inhibitor, binds directly to F₁ in a manner similar to the inhibitor. The 15K protein binds to the F₀ part and holds the inhibitor and the 9K protein on F₁F₀-ATPase even when one of them is detached from the F₁ part.