Dendritic cell uptake of iron-based magnetic nanoparticles

We have investigated the internalization of magnetic nanoparticles (NPs) into dendritic cells (DCs) in order to assess both the final location of the particles and the viability of the cultured cells. The particles, consisting of a metallic iron core covered with carbon, showed no toxic effects on the DCs and had no effect in their viability. We found that mature DCs are able to incorporate magnetic nanoparticles in a range of size from 10 nm to ca. 200 nm, after 24 h of incubation. We describe a method to separate cells loaded with NPs, and analyze the resulting material by electron microscopy and magnetic measurements. It is found that NPs are internalized in lysosomes, providing a large magnetic signal. Our results suggest that loading DCs with properly functionalized magnetic NPs could be a promising strategy for improved vectorization in cancer diagnosis and treatment.     

Agar-based magnetic affinity support for protein adsorption

Magnetic colloidal particles were prepared by a coprecipitation method. The particles were composed of nanometer-sized superparamagnetic Fe(3)O(4) particles stabilized by lauric acid. Then, magnetic agar gel beads were produced by a water-in-oil emulsification method using a mixture of agar solution and the magnetic colloidal particles as the aqueous phase. A reactive triazine dye, Cibacron blue 3GA (CB), was coupled to the gel to prepare an agar-based magnetic affinity support (MAS) for protein adsorption. The support showed good magnetic responsiveness in a magnetic field. Bovine serum albumin (BSA) was used as a model protein to test adsorption equilibrium and kinetic behavior of the MAS. The adsorption equilibrium of BSA to the MAS was described by the Langmuir-type isotherm. Adsorption capacity of the MAS for BSA was up to 25 mg/mL at a CB coupling density of 1.6 micromol/mL. The effect of ionic strength on BSA adsorption was complex, exhibiting a maximum capacity at an ionic strength of 0.06 mol/L. The adsorption of BSA to the MAS was also influenced by pH. Uptake rate of BSA to the MAS was analyzed using a pore diffusion model. The pore diffusion coefficient was estimated to be 1.75 x 10(-11) m(2)/s. Finally, recycled use of the MAS demonstrated the stability of the MAS in protein adsorption and magnetic responsiveness.     

Non-porous magnetic supports for cell immobilization

A new method for covering magnetic particles with a stable non-porous layer of a material like zeolite or activated carbon was used for the preparation of support materials with good properties for the immobilization of yeast Saccharomyces cerevisiae cells. The immobilized cells can be used in batch and continuous alcoholic fermentation. A productivity of 35.6 g ethanol/l · h was reached. The adsorption isotherms of the immobilized yeast cells were determined. Yeast cell immobilization on non-porous magnetic supports obeyed the Langmuir isotherm equation. Satisfactory results were obtained also from repeated batch fermentations with fixed cells on supports additionally treated with glutaraldehyde or by simple adsorption.     

A novel magnetic affinity support for protein adsorption and purification

A novel magnetic support was prepared by an oxidization-precipitation method with poly(vinyl alcohol) (PVA) as the entrapment material. Transmission electron microscopy indicated that the magnetic particles had a core-shell structure, containing many nanometer-sized magnetic cores stabilized by the cross-linked PVA. The particles showed a high magnetic responsiveness in magnetic field, and no aggregation of the particles was observed after the particles had been treated in the magnetic field. These facts indicated that the particles were superparamagnetic. Cibacron blue 3GA (CB) was coupled to the particles to prepare a magnetic affinity support (MAS) for protein adsorption. Lysozyme was used as a model protein to test the adsorption properties of the MAS. The adsorption equilibrium of lysozyme to the MAS was described by the Langmuir-type isotherm. The capacity for lysozyme adsorption was more than 70 mg/g MAS (wet weight) at a relatively low CB coupling density (3-5 micromol/g). In addition, 1.0 M NaCl solution could be used to dissociate the adsorbed lysozyme. Finally, the MAS was recycled for the purification of alcohol dehydrogenase (ADH) from clarified yeast homogenates. Under proper conditions, the magnetic separation yielded over 5-fold purification of the enzyme with 60% recovery of the enzyme activity.     

Application of magnetic agarose support in liquid magnetically stabilized fluidized bed for protein adsorption

A novel magnetic agarose support (MAS) was fabricated for application in a liquid magnetically stabilized fluidized bed (MSFB). It was produced by water-in-oil emulsification method using a mixture of agarose solution and nanometer-sized superparamagnetic Fe(3)O(4) particles as the aqueous phase. The MAS showed good superparamagnetic responsiveness in a magnetic field. A reactive triazine dye, Cibacron blue 3GA (CB), was coupled to the gel to prepare a CB-modified magnetic agarose support (CB-MAS) for protein adsorption. Lysozyme was used as a model protein to test the adsorption equilibrium and kinetic behavior of the CB-MAS. The dependence of bed expansion in the MSFB with a transverse magnetic field on liquid velocity and magnetic field intensity was investigated. Liquid-phase dispersion behavior in the MSFB was examined by measurements of residence time distributions and compared with that obtained in packed and expanded beds. Dynamic lysozyme adsorption in the MSFB was also compared with those in packed and expanded beds. The dynamic binding capacity at 10% breakthrough was estimated at 55.8 mg/mL in the MSFB, higher than that in the expanded bed (31.1 mg/mL) at a liquid velocity of 45 cm/h. The results indicate that the CB-MAS is promising for use in liquid MSFB for protein adsorption.     

In vitro and in vivo accumulation of magnetic nanoporous silica nanoparticles on implant materials with different magnetic properties

Background

In orthopedic surgery, implant-associated infections are still a major problem. For the improvement of the selective therapy in the infection area, magnetic nanoparticles as drug carriers are promising when used in combination with magnetizable implants and an externally applied magnetic field. These implants principally increase the strength of the magnetic field resulting in an enhanced accumulation of the drug loaded particles in the target area and therewith a reduction of the needed amount and the risk of undesirable side effects. In the present study magnetic nanoporous silica core–shell nanoparticles, modified with fluorophores (fluorescein isothiocyanate/FITC or rhodamine B isothiocyanate/RITC) and poly(ethylene glycol) (PEG), were used in combination with metallic plates of different magnetic properties and with a magnetic field. In vitro and in vivo experiments were performed to investigate particle accumulation and retention and their biocompatibility.

Results

Spherical magnetic silica core–shell nanoparticles with reproducible superparamagnetic behavior and high porosity were synthesized. Based on in vitro proliferation and viability tests the modification with organic fluorophores and PEG led to highly biocompatible fluorescent particles, and good dispersibility. In a circular tube system martensitic steel 1.4112 showed superior accumulation and retention of the magnetic particles in comparison to ferritic steel 1.4521 and a Ti90Al6V4 control. In vivo tests in a mouse model where the nanoparticles were injected subcutaneously showed the good biocompatibility of the magnetic silica nanoparticles and their accumulation on the surface of a metallic plate, which had been implanted before, and in the surrounding tissue.

Conclusion

With their superparamagnetic properties and their high porosity, multifunctional magnetic nanoporous silica nanoparticles are ideal candidates as drug carriers. In combination with their good biocompatibility in vitro, they have ideal properties for an implant directed magnetic drug targeting. Missing adverse clinical and histological effects proved the good biocompatibility in vivo. Accumulation and retention of the nanoparticles could be influenced by the magnetic properties of the implanted plates; a remanent martensitic steel plate significantly improved both values in vitro. Therefore, the use of magnetizable implant materials in combination with the magnetic nanoparticles has promising potential for the selective treatment of implant-associated infections.

     

Applications of magnetic surface imprinted materials for solid phase extraction of levofloxacin in serum samples

In this work, molecularly imprinted magnetic carbon nanotubes (MCNTs@MIPs) was prepared with surface imprinting technique for extraction of levofloxacin in serum samples. The preparation of molecularly imprinted polymers (MIPs) used levofloxacin as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross‐linker, and the magnetic carbon nanotubes (MCNTs) was synthesized by solvothermal method. The prepared polymers not only can be separated and collected easily by an external magnetic, but also exhibited high specific surface area and high selectivity to template molecules. Kinetic adsorption and static adsorption capacity investigations indicated that the synthesized MCNTs@MIPs had excellent recognition towards levofloxacin. Furthermore, magnetic solid phase extraction (MSPE) using the prepared MCNTs@MIPs as sorbent was then investigated, and an efficient sample cleanup was obtained with recoveries ranged from 78.7 ± 4.8 % to 83.4 ± 4.1%. In addition, several parameters, including the pH of samples, the amount of MCNTs@MIPs, the adsorption and desorption times, and the eluent, were investigated to obtain optimal extraction efficiency. Under the optimal extraction conditions, the stability of the polymer was also evaluated, and the average recovery reduced less than 7.6% after 5 cycles. MCNTs@MIPs successfully applied in the preconcentration and determination of levofloxacin in serum sample suggested that the MSPE method based on the novel polymers could be a promising alternative for selective and efficient extraction of trace amounts of pharmaceutical substances in bio‐matrix samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and preliminary evaluation of macroporous magnetic agarose particles for bioseparation

Macroporous magnetic agarose particles (MMAPs) were prepared with calcium carbonate as the porogent by the water-in-oil suspension thermal regeneration method. MMAPs with good sphericity and appropriate particle size were obtained. The physical properties of the beads were determined and it was found that the water content (92.1%), porosity (94.4%) and mean pore diameter (120.1 nm) of the MMAPs were higher than those for the normal magnetic particles, indicating successful generation of macropores after calcium carbonate addition. Compared with normal magnetic particles, the mass transfer of biomolecules in MMAPs was remarkably enhanced. Finally, MMAPs were modified with 5-amino-benzimidazol (ABI) ligand and the adsorption capacity of IgG reached 153 mg/mL, higher than that of the normal magnetic particles (126 mg/mL). Moreover, adsorption behavior of MMAPs to IgG was little changed after twenty-five recycled use. Hence, MMAPs prepared herein showed great potential for bioseparation.     

Optimizing a rotor‐stator filter matrix for high‐gradient magnetic separation of functionalized magnetic particles

The processing of wines with enzymes is a process chain in which losses of biocatalyst are unavoidable. A promising technique for the minimization of these losses and for the reduction of processing time is the high‐gradient magnetic separation in combination with enzymes, which are immobilized onto functionalized magnetic particles. When magnetizable particles are used and magnetic separation is applied to separate these particles from nonmagnetizable particles and solutes, the enzymes can be recycled and used for several production batches. The magnetic filter used in this study had a filter matrix with concentrically stacked circular rotor and stator plates which are arranged in an alternating order. Different geometries of the filter plate notches were examined to optimize the reproducibility of particle retention. In computational fluid dynamic studies, the influence of the notch geometries on the shear rate generation was analyzed for the rinsing procedure. Separation experiments with an optimized geometry of the filter plates were carried out in water and white wine suspensions.     

Separation of murine neutrophils and macrophages by thermoresponsive magnetic nanoparticles

Magnetic particles have been used widely in both biotechnological and medical fields, including for immunoassay, enzyme immobilization, drug transport, and immunological diagnosis. Especially particles with bioactive molecules such as antibodies and streptavidin are very useful tools for cell separation. Here we report affinity selection of neutrophils and macrophages from peritoneal inflammatory cells performed by thermoresponsive magnetic nanoparticles conjugated with macrophage-specific anti-F4/80 antibody. The magnetic nanoparticles, which are capped with thermoresponsive polymers, are aggregated by heating the particles over 30 degrees C and show their intrinsic magnetism. The neutrophils are concentrated approximately 90% by these magnetic nanoparticles without any activation, indicating that this novel cell separation method could fulfill a wide range of applications in analysis of the isolation of fragile cells such as neutrophils.     

Design of Magnetic Polymeric Particles as a Stimulus-Responsive System for Gastric Antimicrobial Therapy

The treatment of peptic ulcers induced by H. pylori remains challenging due to the deep mucous layer location of bacteria preventing antimicrobial drug access. The present work aimed to design and evaluate in vitro dual responsive (both pH and magnetic field-sensitive) polymeric magnetic particles loaded with amoxicillin as a smart drug carrier for deep mucous layer penetration and in situ drug release. Magnetite particles were produced by the co-precipitation method and subsequently coated with the Eudragit^®S100 and amoxicillin by using the spray-drying technique. The physicochemical characterization of the obtained particles was carried out by optical and scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibrating sample magnetometry. Additionally, drug release tests and antibacterial activity tests were evaluated in vitro. Microparticles presented 17.2?±?0.4 μm in size and their final composition was 4.3?±?1.5% of amoxicillin, 87.0?±?2.3% of Eudragit, and 9.0?±?0.3% of magnetite. They were both pH and magnetic field responsive while presenting antimicrobial activity. On one side, magnetic field responsiveness of particles is expected to prompt them to reach bacterium niche in deep mucous layer by means of magnetic forces. On the other side, pH responsiveness is expected to enable drug release in the neutral pH of the deep mucous layer, preventing undesired delivery in the acidic gastric lumen. Smart microparticles were designed presenting both pH and magnetic field responsiveness as well as antimicrobial activity. These may be promising assets for peptic ulcer treatment.     

Synthesis of novel porous magnetic silica microspheres as adsorbents for isolation of genomic DNA

An improved procedure is described for preparation of novel mesoporous microspheres consisting of magnetic nanoparticles homogeneously dispersed in a silica matrix. The method is based on a three-step process, involving (i) formation of hematite/silica composite microspheres by urea-formaldehyde polymerization, (ii) calcination of the composite particles to remove the organic constituents, and (iii) in situ transformation of the iron oxide in the composites by hydrogen reductive reaction. The as-synthesized magnetite/silica composite microspheres were nearly monodisperse, mesoporous, and magnetizable, with as typical values an average diameter of 3.5 microm, a surface area of 250 m(2)/g, a pore size of 6.03 nm, and a saturation magnetization of 9.82 emu/g. These magnetic particles were tested as adsorbents for isolation of genomic DNA from Saccharomyces cerevisiae cells and maize kernels. The results are quite encouraging as the magnetic particle based protocols lead to the extraction of genomic DNA with satisfactory integrity, yield, and purity. Being hydrophilic in nature, the porous magnetic silica microspheres are considered a good alternative to polystyrene-based magnetic particles for use in biomedical applications where nonspecific adsorption of biomolecules is to be minimized.     

Application of magnetic particle tracking velocimetry to quadrupole magnetic sorting of porcine pancreatic islets

Magnetic isolation is a promising method for separating and concentrating pancreatic islets of Langerhans for transplantation in Type 1 diabetes patients. We are developing a continuous magnetic islet sorter to overcome the restrictions of current purification methods that result in limited yield and viability. In Quadrupole Magnetic Sorting (QMS) islets are magnetized by infusing superparamagnetic microbeads into islets' vasculature via arteries that serve the pancreas. The performance of the islet sorter depends on the resulting speed of the islets in an applied magnetic field, a property known as magnetophoretic mobility. Essential to the design and successful operation of the QMS is a method to measure the magnetophoretic mobilities of magnetically infused islets. We have adapted a Magnetic Particle Tracking Velocimeter (MPTV) to measure the magnetophoretic mobility of particles up to 1,000 μm in diameter. Velocity measurements are performed in a well-characterized uniform magnetic energy gradient using video imaging followed by analysis of the video images with a computer algorithm that produces a histogram of absolute mobilities. MPTV was validated using magnetic agarose beads serving as islet surrogates and subjecting them to QMS. Mobility distributions of labeled porcine islets indicated that magnetized islets have sufficient mobility to be captured by the proposed sorting method, with this result confirmed in test isolations of magnetized islets.     

Stimuli-Responsive magnetic nanoparticles for monoclonal antibody purification

Monoclonal antibodies (mAbs) are important therapeutic proteins. One of the challenges facing large-scale production of monoclonal antibodies is the capacity bottleneck in downstream processing, which can be circumvented by using magnetic stimuli-responsive polymer nanoparticles. In this work, stimuli-responsive magnetic particles composed of a magnetic poly(methyl methacrylate) core with a poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AA)) shell cross-linked with N, N'-methylenebisacrylamide were prepared by miniemulsion polymerization. The particles were shown to have an average hydrodynamic diameter of 317 nm at 18°C, which decreased to 277 nm at 41°C due to the collapse of the thermo-responsive shell. The particles were superparamagnetic in behavior and exhibited a saturation magnetization of 12.6 emu/g. Subsequently, we evaluated the potential of these negatively charged stimuli-responsive magnetic particles in the purification of a monoclonal antibody from a diafiltered CHO cell culture supernatant by cation exchange. The adsorption of antibodies onto P(NIPAM-co-AA)-coated nanoparticles was highly selective and allowed for the recovery of approximately 94% of the mAb. Different elution strategies were employed providing highly pure mAb fractions with host cell protein (HCP) removal greater than 98%. By exploring the stimuli-responsive properties of the particles, shorter magnetic separation times were possible without significant differences in product yield and purity.     

Promising approaches in using magnetic nanoparticles in oncology

The development of new and effective drug delivery systems for cancer treatment represents one of the significant challenges facing biomedical technology in the last decade. Among the different methods of drug delivery, magnetic drug targeting, by enabling specific delivery of chemotherapeutic agents through the use of magnetic nanoparticles and magnetic field gradient, could be a promising approach. Recently, magnetic nanoparticles have attracted additional attention because of their potential as contrast agents for magnetic resonance imaging and heat mediators for cancer therapy. This review summarizes these approaches in the use of magnetic nanoparticles in biomedical applications and novel methods for their optimization.     

Fabrication and characterization of rigid magnetic monodisperse microspheres for protein adsorption

This article describes the fabrication of a rigid magnetic monodisperse bead (M-PGMA-TRI, 4.92 microm) with polyglycidyl methacrylate (PGMA) cross-linked by trimethylolpropane trimethacrylate (TRI). This was realized by adding a proper amount (2%, w/w) of TRI after 3 h of the dispersion-polymerization reaction with the monomer of GMA. The mono-sized microspheres were further processed to introduce magnetic granules by sulfonation and penetration-deposition approaches. The monodisperse bead (M-PGMA) without TRI addition was also fabricated for comparison. The morphology, size and magnetic characteristics of the microspheres were extensively characterized. The M-PGMA-TRI microspheres were nonporous, of smooth surface and superparamagnetic with a saturation magnetization of 13.0 emicro/g. Recycled use of the material for protein adsorption exhibited stability of the magnetic properties of the M-PGMA-TRI, as compared to the significant loss of the saturation magnetization of the M-PGMA. The chemical stability of the M-PGMA-TRI was also confirmed by examining its protein adsorption and magnetic properties after incubation in various solutions such as acidic buffer (pH 2.2) for 24 h. The adsorption capacity of gamma-globulin reached 287.2 mg/g and kept stable in the repeated adsorption/desorption/regeneration cycles. The results indicated that the introduction of 2% TRI was promising for producing rigid magnetic mono-sized microspheres for protein adsorption.     

A biocompatible magnetic film: synthesis and characterization

BACKGROUND: Biotechnology applications of magnetic gels include biosensors, targeted drug delivery, artificial muscles and magnetic buckles. These gels are produced by incorporating magnetic materials in the polymer composites. METHODS: A biocompatible magnetic gel film has been synthesized using polyvinyl alcohol. The magnetic gel was dried to generate a biocompatible magnetic film. Nanosized iron oxide particles (gamma-Fe2O3, ~7 nm) have been used to produce the magnetic gel. RESULTS: The surface morphology and magnetic properties of the gel films were studied. The iron oxide particles are superparamagnetic and the gel film also showed superparamagnetic behavior. CONCLUSION: Magnetic gel made out of crosslinked magnetic nanoparticles in the polymer network was found to be stable and possess the magnetic properties of the nanoparticles.     

Carbon nanotube clusters as universal bacterial adsorbents and magnetic separation agents

The magnetic susceptibility and high bacterial affinity of carbon nanotube (CNT) clusters highlight their great potential as a magnetic bio‐separation agent. This article reports the CNT clusters' capability as “universal” bacterial adsorbents and magnetic separation agents by designing and testing a multiwalled carbon nanotube (MWNT) cluster‐based process for bacterial capturing and separation. The reaction system consisted of large clusters of MWNTs for bacterial capture and an external magnet for bio‐separation. The designed system was tested and optimized using Escherichia coli as a model bacterium, and further generalized by testing the process with other representative strains of both gram‐positive and gram‐negative bacteria. For all strains tested, bacterial adsorption to MWNT clusters occurred spontaneously, and the estimated MWNT clusters' adsorption capacities were nearly the same regardless of the types of strains. The bacteria‐bound MWNT clusters also responded almost instantaneously to the magnetic field by a rare‐earth magnet (0.68 Tesla), and completely separated from the bulk aqueous phase and retained in the system. The results clearly demonstrate their excellent potential as highly effective “universal” bacterial adsorbents for the spontaneous adsorption of any types of bacteria to the clusters and as paramagnetic complexes for the rapid and highly effective magnetic separations. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Reversible immobilization of glucoamylase onto magnetic polystyrene beads with multifunctional groups

A novel and simple process for the surface functionalization of micron-sized monodisperse magnetic polystyrene (PS) microbeads was reported. The polystyrene seed particles were prepared prior to the dispersion polymerization method. Afterwards, series of surface chemical modifications on polystyrene microspheres were conducted, and three end-functional microspheres with carboxyl, imidazolyl and sulphydryl groups were obtained. The functional magnetic polystyrene microspheres were prepared by impregnation and subsequent precipitation of ferric and ferrous ions into the polystyrene particles. Finally, the functional magnetic polystyrene was used for the reversible immobilization of glucoamylase via metal-affinity adsorption. The results indicated that the obtained immobilized glucoamylase presented excellent reusability, applicability, magnetic response and regeneration of supports. The magnetic PS microspheres retained >65% of its initial activity at 65 °C over 6 h; and the lowest residual activity of immobilized glucoamylase prepared by regenerated supports still remained about 50% of the initial activity after the 10th cycles.     

First comprehensive view on a magnetic separation based protein purification processes: From process development to cleaning validation of a GMP‐ready magnetic separator

Magnetic separation processes are known as integrated bioanalytical protein purification method since decades and are well described. However, use of magnetic separation processes in a regulated industrial production environment has been prevented by the lack of suitable process equipment and prejudice against the productivity of the process and its qualification for cleaning‐in‐place operation. With the aim of overcoming this prejudice, a comprehensive process development approach is presented, based on a GMP‐compliant magnetic separator, including an optimization of the batch adsorption process, implementation into a technical‐scale, and the development and validation of cleaning routines for the device. By the implementation of a two‐step counter‐current binding process, it was possible to raise the yields of the magnetic separation process even for very low concentrated targets in a vast surplus of competing proteins, like the hormone equine chorionic gonadotropin in serum, from 74% to over 95%. For the validation of the cleaning process, a direct surface swabbing method combined with a total organic carbon analysis was established for the determination of two model contaminants. The cleanability of the process equipment was proven for both model contaminants by reliably meeting the 10 ppm criteria.