Controlled syntheses of natural and disulfide-mispaired regioisomers of alpha-conotoxin SI.

Methods are reported for the unambiguous syntheses of all three possible disulfide regioisomers with the sequence of alpha-conotoxin SI, a tridecapeptide amide from marine cone snail venom that binds selectively to the muscle subtype of nicotinic acetylcholine receptors. The naturally occurring peptide has two 'interlocking' disulfide bridges connecting Cys2-Cys7 and Cys3-Cys13 (2/7&3/13), while in the two mispaired isomers the disulfide bridges connect Cys2-Cys13 and Cys3-Cys7 (2/13 & 3/7, 'nested') and Cys2-Cys3 and Cys7-Cys13 (2/3 & 7/13, 'discrete'), respectively. Alignment of disulfide bridges was controlled at the level of orthogonal protection schemes for the linear precursors, assembled by Fmoc solid-phase peptide synthesis on acidolyzable tris(alkoxy)benzylamide (PAL) supports. Side-chain protection of cysteine was provided by suitable pairwise combination of the S-9H-xanthen-9-yl (Xan) and S-acetamidomethyl (Acm) protecting groups. The first disulfide bridge was formed from the corresponding bis(thiol) precursor obtained by selective deprotection of S-Xan, and the second disulfide bridge was formed by orthogonal co-oxidation of S-Acm groups on the remaining two Cys residues. It was possible to achieve the desired alignments with either order of loop formation (smaller loop before larger, or vice versa). The highest overall yields were obtained when both disulfides were formed in solution, while experiments where either the first or both bridges were formed while the peptide was on the solid support revealed lower overall yields and poorer selectivities towards the desired isomers.     

Binding of phlorizin to the C-terminal loop 13 of the Na(+)/glucose cotransporter does not depend on the [560-608] disulfide bond

The disulfide bonds of the Na(+)/glucose cotransporter (SGLT1) are believed to participate in the binding of the transport inhibitor phlorizin. Here, we investigated the role of the [560-608] disulfide bond on the phlorizin-binding function of the C-terminal loop 13 of SGLT1 using 3-iodoacetamidophlorizin (3-IAP) as a probe. The reactivity of 3-IAP to the fully reduced loop 13 was competitively inhibited by phlorizin, as evident from the MALDI mass spectra. It indicates that the disulfide bond is not mandatory for phlorizin binding. CD and equilibrium unfolding studies showed that the secondary structure and conformation stability of loop 13 were not affected by removing the disulfide bond. Furthermore, we generated a series of loop 13 mutants to assess the contribution of the disulfide bond to phlorizin binding. A positive correlation between the stability and phlorizin affinity of the mutant proteins was observed, implying that the protein stability, rather than the disulfide bond, is relevant to the phlorizin-binding function of loop 13.     

Evidence for a Partially Structured State of the Amylin Monomer

Islet amyloid polypeptide (amylin) is the main component in amyloid deposits formed in type II diabetes. We used triplet quenching to probe the dynamics of contact formation between the N-terminal disulfide loop and a C-terminal tryptophan in monomeric amylins from human and rat. Quenching rates measured in the absence of denaturant are four times larger than those in 6 M guanidinium chloride, indicating a decrease in the average end-to-end distance (collapse) at low denaturant concentrations. We were surprised to find an even greater (sevenfold) increase in quenching rates on removal of denaturant for a hydrophilic control peptide containing the disulfide loop compared to the same peptide without the loop (twofold change). These results suggest that collapse is driven by backbone-backbone and backbone-side chain interactions involving the disulfide loop portion of the chain rather than by the formation of side-chain hydrophobic contacts. Molecular dynamics simulations of the control peptide show that the collapse results from hydrogen-bonding interactions between the central residues of the chain and the disulfide loop. The quenching experiments also indicate that the monomer of the human, amyloidogenic form of amylin is more compact than the rat form, which does not form amyloid. We discuss these newly observed differences between human and rat amylin in solution and their possible relation to aggregation and to the physiological function of amylin binding to the calcitonin receptor.     

Glycoprotein hormone assembly in the endoplasmic reticulum: II. Multiple roles of a redox sensitive beta-subunit disulfide switch

All three human glycoprotein hormone heterodimers are assembled in the endoplasmic reticulum by threading the glycosylated end of alpha-subunit loop two (alpha2) beneath a disulfide "latched" strand of the beta-subunit known as the "seatbelt." This remarkable event occurs efficiently even though the seatbelt effectively blocks the reverse process, thereby stabilizing each heterodimer. Studies described here show that assembly is facilitated by the formation, disruption, and reformation of a loop within the seatbelt that is stabilized by the most easily reduced disulfide in the free beta-subunit. We refer to this disulfide as the "tensor" because it shortens the seatbelt, thereby securing the heterodimer. Formation of the tensor disulfide appears to precede and facilitate seatbelt latching in most human choriogonadotropin beta-subunit molecules. Subsequent disruption of the tensor disulfide elongates the seatbelt, thereby increasing the space beneath the seatbelt and the beta-subunit core. This permits the formation of hydrogen bonds between backbone atoms of the beta-subunit cystine knot and the tensor loop with backbone atoms in loop alpha2, a process that causes the glycosylated end of loop alpha2 to be threaded between the seatbelt and the beta-subunit core. Contacts between the tensor loop and loop alpha2 promote reformation of the tensor disulfide, which explains why it is more stable in the heterodimer than in the uncombined beta-subunit. These findings unravel the puzzling nature of how a threading mechanism can be used in the endoplasmic reticulum to assemble glycoprotein hormones that have essential roles in vertebrate reproduction and thyroid function.     

Selective Removal of Individual Disulfide Bonds within a Potato Type II Serine Proteinase Inhibitor from Nicotiana alata Reveals Differential Stabilization of the Reactive-Site Loop

The 53-amino-acid trypsin inhibitor 1 from Nicotiana alata (T1) belongs to the potato type II family also known as the PinII family of proteinase inhibitors, one of the major families of canonical proteinase inhibitors. T1 contains four disulfide bonds, two of which (C4-C41 and C8-C37) stabilize the reactive-site loop. To investigate the influence of these two disulfide bonds on the structure and function of potato II inhibitors, we constructed two variants of T1, C4A/C41A-T1 and C8A/C37A-T1, in which these two disulfide bonds were individually removed and replaced by alanine residues. Trypsin inhibition assays show that wild-type T1 has a K_i of < 5 nM, C4A/C41A-T1 has a weaker K_i of ∼ 350 nM, and the potency of the C8A/C37A variant is further decreased to a K_i of ∼ 1.8 μM. To assess the influence of the disulfide bonds on the structure of T1, we determined the structure and dynamics of both disulfide variants by NMR spectroscopy. The structure of C4A/C41A-T1 and the amplitude of intrinsic flexibility in the reactive-site loop resemble that of the wild-type protein closely, despite the lack of the C4-C41 disulfide bond, whereas the timescale of motions is markedly decreased. The rescue of the structure despite loss of a disulfide bond is due to a previously unrecognized network of interactions, which stabilizes the structure of the reactive-site loop in the region of the missing disulfide bond, while allowing intrinsic motions on a fast (picosecond-nanosecond) timescale. In contrast, no comparable interactions are present around the C8-C37 disulfide bond. Consequently, the reactive-site loop becomes disordered and highly flexible in the structure of C8A/C37A-T1, making it unable to bind to trypsin. Thus, the reactive-site loop of T1 is stabilized differently by the C8-C37 and C4-C41 disulfide bonds. The C8-C37 disulfide bond is essential for the inhibitory activity of T1, whereas the C4-C41 disulfide bond is not as critical for maintaining the three-dimensional structure and function of the molecule but is responsible for maintaining flexibility of the reactive-site loop on a microsecond-nanosecond timescale.     

Role of the hexapeptide disulfide loop in the gamma-carboxyglutamic acid domain of protein C in Ca2+-mediated structural and functional properties

The anticoagulant and immunomodulatory effects of protein C (PC) rely on the presence of the N-terminal gamma-carboxyglutamic acid (Gla) domain. This domain is strongly conserved among vitamin K-dependent blood proteins and, in addition to a high relative content of Gla, contains a hexapeptide disulfide loop between Cys residues 17 and 22. In the present study, the contribution of the hexapeptide loop toward Gla domain structure and function was evaluated using wild-type and Cys17/Cys22-alkylated synthetic peptide analogues of the 47-residue Gla domain/helical stack of PC. Circular dichroism and intrinsic fluorescence measurements revealed significant differences in the metal ion-dependent conformations of the two peptides. Disruption of the disulfide loop slightly altered the capacity of the peptide to interact with acidic phospholipid (PL) vesicles. The affinity of the alkylated peptide for soluble endothelial protein C receptor (EPCR), as demonstrated by surface plasmon resonance studies, was increased compared with the wild-type species, although total binding was compromised. These results suggest that the disulfide loop of PC contributes to the overall Ca(2+)-dependent conformation but is not strictly required for PL membrane binding or EPCR recognition.     

Structural characterization of the two refold dimers of recombinant bovine somatotropin (bST)

Two major dimers are generated during the folding/oxidation of inclusion bodies of recombinant bovine somatotropin (bST). These dimers represent the major part of the inactive high molecular weight species that are formed in this process. The structures of the two dimers are unambiguously determined by peptide mapping using trypsin, thrombin cleavage, and selective DTT reduction experiments. Results indicate that the formation of both dimers involves the large disulfide loop cysteines. The latter-eluting dimer from RP-HPLC, previously reported as a large loop concatenated dimer, was revised to be an antiparallel disulfide-linked dimer. On the other hand, the first eluting dimer is a concatenane in which two monomers are held together by the interlocking of the two large disulfide loops.     

Kinetics of disulfide exchange reactions of monomer and dimer loops of cysteine-valine-cysteine peptides

Rate constants have been determined in 3 M guanidine hydrochloride for disulfide exchange reactions between glutathione and two synthetic peptides containing a cysteine-valine-cysteine region. Equilibrium experiments demonstrate the absence of noncovalent peptide aggregation in this solvent. Procedures are given for separating seven different components in quenched reactions, including the fully reduced cysteine cluster, the monomeric disulfide loop, parallel and antiparallel dimer loops, and the three monomers containing one or two mixed disulfides with glutathione. Intramolecular rate constants for (1) formation of a sterically strained monomer loop, (2) transfer of glutathione between the two cysteines on the same peptide chain, and (3) formation of unstrained dimer loops correspond to a series of processes forming rings of increasing size. In one sequence, these rate constants are 3, 6, and about 21 s-1, respectively. The larger loops are formed more easily. In the other sequence, rate constants for formation and opening of monomer loops are accelerated 180- and 1300-fold, respectively, relative to analogous reactions in a peptide containing eight residues between the two cysteines. This gives a 7-fold smaller equilibrium constant for ring closure in the cysteine cluster. Dimer formation occurs by a mechanism utilizing the accelerated opening of monomer loops. Results provide information assisting efforts to develop strategies for directing disulfide pairing in novel protein structures. Results also help define factors contributing to formation of undesired oligomers during efforts to refold cysteine-containing proteins obtained by bacterial expression of mammalian genes.     

Heterodimer formation between thioredoxin f and fructose 1,6-bisphosphatase from spinach chloroplasts

Chloroplast fructose 1,6-bisphosphatase (FBPase) is activated by reduction of a regulatory disulfide through thioredoxin f (Trx f). In the course of this reduction a transient mixed disulfide is formed linking covalently Trx f with FBPase, which possesses three Cys on a loop structure, two of them forming the redox-active disulfide bridge. The goal of this study was to identify the Cys involved in the transient mixed disulfide. To stabilize this reaction intermediate, mutant proteins with modified active sites were used. We identified Cys-155 of the FBPase as the one engaged in the formation of the mixed disulfide intermediate with Cys-46 of Trx f.     

Tissue-specific expression of head-to-tail cyclized miniproteins in Violaceae and structure determination of the root cyclotide Viola hederacea root cyclotide1

The plant cyclotides are a family of 28 to 37 amino acid miniproteins characterized by their head-to-tail cyclized peptide backbone and six absolutely conserved Cys residues arranged in a cystine knot motif: two disulfide bonds and the connecting backbone segments form a loop that is penetrated by the third disulfide bond. This knotted disulfide arrangement, together with the cyclic peptide backbone, renders the cyclotides extremely stable against enzymatic digest as well as thermal degradation, making them interesting targets for both pharmaceutical and agrochemical applications. We have examined the expression patterns of these fascinating peptides in various Viola species (Violaceae). All tissue types examined contained complex mixtures of cyclotides, with individual profiles differing significantly. We provide evidence for at least 57 novel cyclotides present in a single Viola species (Viola hederacea). Furthermore, we have isolated one cyclotide expressed only in underground parts of V. hederacea and characterized its primary and three-dimensional structure. We propose that cyclotides constitute a new family of plant defense peptides, which might constitute an even larger and, in their biological function, more diverse family than the well-known plant defensins.     

Entropic folding pathway of human epidermal growth factor explored by disulfide scrambling and amplified collective motion simulations

Epidermal growth factor (EGF) regulates cell proliferation and differentiation by binding to the EGF receptor (EGFR) extra-cellular domains. Human EGF is a small, single-chain protein comprising three distinct loops (A, B, and C), which are connected by three disulfide bridges (Cys6-Cys20, Cys14-Cys31, and Cys33-Cys42). These disulfide bridges are essential for structural stability and biological activity. EGF was extensively studied by disulfide scrambling, an experimental technique for the conformational entrapment of intermediate states, which allows us to study the folding pathway of proteins containing disulfide bonds. The experimental results showed that there is a major 2-disulfide intermediate (denoted EGF-II) and that the native disulfide bonding pattern is less prevalent in one of the mutants. In this article, we investigated for the first time the solution conformations of wild-type EGF, EGF-II, and the mutant S9C through extensive molecular dynamics (MD) simulations in water using both the standard MD technique and a recently developed amplified-collective-motion (ACM) sampling method. Compared to standard MD simulations, we achieved a much more enhanced sampling by the ACM simulations, and the structures were sufficiently relaxed to estimate configurational entropies. The simulation results suggest a predominantly entropic folding pathway governed by the disorder of three functional loop regions. Although EGF-II exhibits two native disulfide bonds (Cys14-Cys31 and Cys33- Cys42), its large configurational entropy inhibits a direct transition to the native structure in the folding process. When Ser9 is mutated into Cys, a non-native disulfide bridge Cys9- Cys20 is slightly more favorable than the native Cys6-Cys20 because a less constrained N-terminus affords larger entropy. Isomers that are functionally less active also exhibit a more localized dynamics of the functional loop regions, which may suggest a possible mechanism for the modulation of EGF activity.     

Intracellular folding pathway of the cystine knot-containing glycoprotein hormone alpha-subunit

Three of the five disulfide bonds in the glycoprotein hormone alpha-subunit (GPH-alpha) form a cystine knot motif that stabilizes a three-loop antiparallel structure. Previously, we described a mutant (alpha(k)) that contained only the three knot disulfide bonds and demonstrated that the cystine knot was necessary and sufficient for efficient GPH-alpha folding and secretion. In this study, we used alpha(k) as a model to study the intracellular GPH-alpha folding pathway. Cystine knot formation proceeded through a 1-disulfide intermediate that contained the 28-82 disulfide bond. Formation of disulfide bond 10-60, then disulfide bond 32-84, followed the formation of 28-82. Whether the two non-cystine knot bonds 7-31 and 59-87 could form independent of the knot was also tested. Disulfide bond 7-31 formed rapidly, whereas 59-87 did not form when all cysteine residues of the cystine knot were converted to alanine, suggesting that 7-31 forms early in the folding pathway and that 59-87 forms during or after cystine knot formation. Finally, loop 2 of GPH-alpha has been shown to be very flexible, suggesting that loop 2 does not actively drive GPH-alpha folding. To test this, we replaced residues 36-55 in the flexible loop 2 with an artificially flexible glycine chain. Consistent with our hypothesis, folding and secretion were unaffected when loop 2 was replaced with the glycine chain. Based on these findings, we describe a model for the intracellular folding pathway of GPH-alpha and discuss how these findings may provide insight into the folding mechanisms of other cystine knot-containing proteins.     

Conversion of bovine growth hormone cysteine residues to serine affects secretion by cultured cells and growth rates in transgenic mice.

GHs have been found to possess two disulfide bonds. We set out to determine the importance of bovine (b) GH's disulfide bonds relative to the ability of the hormone to be secreted by cultured cells in vitro and to promote growth in transgenic mice. We have generated six mutated bGH genes that encode serine (Ser) substitutions for cysteines (Cys). These mutated genes were used to generate bGH analogs in which either one or both disulfide bonds are destroyed. When the small loop of bGH was destroyed (Cys181-Ser or Cys189-Ser), the bGH analogs were found to be secreted by mouse L-cells at levels comparable to those of wild-type bGH. However, secretion was drastically reduced when the large loop was abolished (Cys53-Ser or Cys164-Ser). An immunofluorescence study of these bGH analogs revealed two distinct patterns of subcellular localization. Bovine GH analogs with mutations in the small loop demonstrated a perinuclear distribution similar to that of wild-type bGH, but analogs containing a disrupted large loop revealed a uniform cytoplasmic distribution pattern. When these mutated bGH genes were individually introduced into transgenic mice, only those animals that expressed bGH analogs with the large loop intact demonstrated a growth-enhanced phenotype. Transgenic mice that expressed bGH analogs lacking the large loop showed growth rates similar to those of nontransgenic mice. These results suggest that the integrity of the large loop, but not that of the small loop, is essential for the growth-enhancing activity of bGH in transgenic mice.     

The refined crystal structure of alpha-cobratoxin from Naja naja siamensis at 2.4-A resolution

The crystal structure of the "long" alpha-neurotoxin alpha-cobratoxin was refined to an R-factor of 19.5% using 3271 x-ray data to 2.4-A resolution. The polypeptide chain forms three loops, I, II, III, knotted together by four disulfide bridges, with the most prominent, loop II, containing another disulfide close to its lower tip. Loop I is stabilized by one beta-turn and two beta-sheet hydrogen bonds; loop II by eight beta-sheet hydrogen bonds, with the tip folded into two distorted right-handed helical turns stabilized by two alpha-helical and two beta-turn hydrogen bonds; and loop III by hydrophobic interactions and one beta-turn. Loop II and one strand of loop III form an antiparallel triple-pleated beta-sheet, and tight anchoring of the Asn63 side chain fixes the tail segment. In the crystal lattice, the alpha-cobratoxin molecules dimerize by beta-sheet formation between strands 53 and 57 of symmetry-related molecules. Because such interactions are found also in a cardiotoxin and alpha-bungarotoxin, this could be of importance for interaction with acetylcholine receptor.     

Thrombin inhibition by cyclic peptides from thrombomodulin.

Peptides corresponding to the loop regions of the fourth, fifth, and sixth epidermal growth factor (EGF)-like domains of thrombomodulin (TM) have been synthesized and assayed for thrombin inhibition, as indicated by both inhibition of thrombin-mediated fibrinogen clotting and inhibition of the association of thrombin with TM that results in protein C activation. Peptides from the fifth EGF-like domain showed significant inhibition of fibrinogen clotting and protein C activation, whereas peptides from the fourth and sixth EGF-like domains were weak inhibitors in both assays. Two structural features were important for inhibitory potency of the peptides from the fifth EGF-like domain: cyclization by a disulfide bond and attachment of the "tail" amino acids C-terminal to the disulfide loop. Linear control peptides did not significantly inhibit clotting or protein C activation. The C-terminal loop alone, the "tail" peptide, or a mixture of the two were at least 10-fold less potent inhibitors of clotting or protein C activation. A more constrained peptide analog was designed by deletion of an isoleucine within the C5-C6 disulfide loop, TM52-1 + 5C. This analog was a better inhibitor in both assay systems, having a Ki for protein C activation of 26 microM.     

Identification and function of disulfide bridges in the extracellular domains of the angiotensin II type 2 receptor.

The angiotensin II (AngII) receptor family is comprised of two subtypes, type 1 (AT(1)) and type 2 (AT(2)). Although sharing low homology (only 34%), mutagenesis has identified some key residues that are conserved between both subtypes, including four extracellular cysteines. Previous AT(1) mutagenesis demonstrated that the cysteines form two disulfide bonds, one linking the first and second extracellular loops and another connecting the amino terminus to the third extracellular loop. The importance of these AT(1) disulfides in ligand binding is supported by the effect of dithiothreitol (DTT). DTT breaks disulfide bonds, thereby strongly inhibiting ligand binding in AT(1) receptors. Despite retaining the same cysteines, AT(2) receptor ligand binding is paradoxically enhanced by DTT. Thus, we constructed a series of AT(2) cysteine mutations, either individually or paired, to establish the role of the cysteines and the source of DTT's effects. The AT(2) cysteine mutants surprisingly confirmed that the cysteines form disulfide bonds in the same manner as in the AT(1) subtype. However, breaking the AT(2) disulfide bridges yielded two responses. As in AT(1) receptors, mutations disrupting the disulfide bond between the first and second extracellular loops reduced AT(2) binding by 4-fold. In contrast, mutations breaking the disulfide bridge between the amino terminus and the third extracellular loop increased AT(2) binding, mimicking DTT's effect on this subtype. Further analysis of AT(1)/AT(2) chimeric exchange mutants of these domains suggested that the AT(2) amino terminus and third extracellular loop may possess latent binding epitopes that are only uncovered after DTT exposure.     

Disulfide bond tethering of extracellular loops does not affect the closure of OmpF porin at acidic pH

The permeability of the outer membrane of gram‐negative bacteria is essentially controlled by pore‐forming proteins of the porin family. The trimeric E. coli porin OmpF is assembled as a triple β‐barrel, where each monomer contains a central pore and extracellular loops. Electrophysiological analysis of the behavior of OmpF at acidic pH reveals that the protein undergoes a conformational change leading to the sequential step‐wise closure of the three monomers. A previous atomic force microscopy study suggested that the conformational change might be due to a bending of extracellular loops over the pore opening, and loop deletion experiments suggested that loops L1, L7, and L8 are involved. In order to test the hypothesis for loop movement, we engineered a series of double cysteine mutants in loops L1, L6, L7 and L8 in order to create disulfide bonds linking two loops to each other, or the two branches of a loop, or a loop to the β‐barrel. Five out of the six mutants showed the formation of the disulfide bond. However, none of these had an altered response to acidic pH relative to the wildtype channel. Although we cannot dismiss the possibility that the mobility restriction introduced by each disulfide bond was too localized to impact a more global conformational change of the three loops, the fact that all of the different types of disulfide bond tethering were similarly ineffective suggests that the extracellular loops L1, L7, and L8 may not undergo a major acidic‐pH induced conformational change leading to channel closure. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Domain swapping of CD4 upon dimerization

It has recently been shown that disulfide bond Cys130-Cys159 in domain 2 of monomeric CD4 is involved in the formation of CD4 disulfide-bonded dimers on cell surfaces and that it can influence the permissiveness of cells to HIV infection. Because this disulfide bond is buried in the monomer, a large conformational change must take place in order to allow for such disulfide exchange. Using standard optimization techniques, whose efficiency was first checked in the well-documented CD2 case, we have shown that 3D domain swapping is a likely candidate for the conformational change, the hinge loop, or linker, being loop E-F. Indeed, as a consequence of domain swapping, because Cys130 and Cys159 belong to beta-strands C and F, respectively, two disulfide bonds become established between Cys130 in one monomer and Cys159 in the other one. Such a disulfide exchange has already been observed when the nuclear magnetic resonance (NMR) structure of the prion protein was compared to the crystallographic, dimeric one. In both cases, domain swapping implies disulfide exchange because the linker is located in the sequence between two disulfide-bonded cysteines. As in the CD2 case, the proposed configuration of the CD4 dimer is found as a pair of neighboring monomers in the crystallographic unit cell. Moreover, because in this configuration the epitope of monoclonal antibody MT151, which does not compete with Gp120 for CD4 binding, is in the cleft between the pair of CD4 monomers, it is suggested that MT151 achieves its HIV-blocking activity by interfering with the formation of CD4 domain-swapped dimers on cell surface.     

The covalent structure of the elastase inhibitor from Anemonia sulcata--a "non-classical" Kazal-type protein

The amino-acid sequence of the proteinase inhibitor specific for elastases from the sea anemone Anemonia sulcata was determined from performic-acid oxidized inhibitor and from three cyanogen bromide fragments of reduced and carboxymethylated inhibitor. The molecule consists of a single polypeptide chain formed from 48 amino-acid residues and is stabilized by three intramolecular disulfide bridges. After cyanogen bromide cleavage of the native protein at methionines 10 and 28 followed by chymotryptic cleavage two fragments each containing a single disulfide bridge were isolated. These indicated the location of three intramolecular disulfide linkages between Cys4 and Cys34 (part of A-loop), Cys8 and Cys27 (B-loop) and Cys16 and Cys48 (C-loop). The sequential homology and the disulfide pattern identified the elastase inhibitor as a Kazal-type inhibitor in which, however, not only the CysI-CysII segment is rather short but interestingly the Cys4-Cys34 disulfide anchoring point (i.e. CysI-CysV) in the C-loop is shifted by one turn in the alpha-helical segment towards the C-terminus. Thus, the elastase inhibitor is a non-classical Kazal-type inhibitor with respect to the positioning of the half-cystines. The inhibitor molecule was modelled based on the known three-dimensional structure of the silver pheasant ovomucoid third domain. The shortened amino-terminal segment was arranged in such a manner to allow disulfide bridge formation between the first cysteine Cys4 and the replaced Cys34 under maintenance of a suitable binding loop conformation. The characteristic ovomucoid scaffold consisting of a central alpha-helix, an adjacent three-stranded beta-sheet and the proteinase-binding loop cross-connected through disulfide bridges CysI-CysV and CysIII-CysVI was conserved.     

Homologous proteins with different folds: the three-dimensional structures of domains 1 and 6 of the multiple Kazal-type inhibitor LEKTI

We have determined the solution structures of recombinant domain 1 and native domain 6 of the multi-domain Kazal-type serine proteinase inhibitor LEKTI using multi-dimensional NMR spectroscopy. While two of the 15 potential inhibitory LEKTI domains contain three disulfide bonds typical of Kazal-type inhibitors, the remaining 13 domains have only two of these disulfide bridges. Therefore, they may represent a novel type of serine proteinase inhibitor. The first and the sixth LEKTI domain, which have been isolated from human blood ultrafiltrate, belong to this group. In spite of sharing the same disulfide pattern and a sequence identity of about 35% from the first to the fourth cysteine, the two proteins show different structures in this region. The three-dimensional structure of domain 6 consists of two helices and a beta-hairpin structure, and closely resembles the three-dimensional fold of classical Kazal-type serine proteinase inhibitors including the inhibitory binding loop. Domain 6 has been shown to be an efficient, but non-permanent serine proteinase inhibitor. The backbone geometry of its canonical loop is not as well defined as the remaining structural elements, providing a possible explanation for its non-permanent inhibitory activity. We conclude that domain 6 belongs to a subfamily of classical Kazal-type inhibitors, as the third disulfide bond and a third beta-strand are missing. The three-dimensional structure of domain 1 shows three helices and a beta-hairpin, but the central part of the structure differs remarkably from that of domain 6. The sequence adopting hairpin structure in domain 6 exhibits helical conformation in domain 1, and none of the residues within the putative P3 to P3' stretch features backbone angles that resemble those of the canonical loop of known proteinase inhibitors. No proteinase has been found to be inhibited by domain 1. We conclude that domain 1 adopts a new protein fold and is no canonical serine proteinase inhibitor.