Immobilization of histidine-tagged proteins on gold surfaces using chelator thioalkanes

The reversible, oriented immobilization of proteins on solid surfaces is a prerequisite for the investigation of molecular interactions and the controlled formation of supramolecular assemblies. This paper describes a generally applicable method using a synthetic chelator thioalkane that can be self-assembled on gold surfaces. The reversible binding of an anti-lysozyme F(ab) fragment modified with a C-terminal hexahistidine extension was monitored and the apparent dissociation constants determined using surface plasmon resonance. Infra-red spectroscopy demonstrated that the secondary structure of the protein was unaffected by the immobilization process. The retention of functionality of the immobilized protein was also successfully demonstrated. Given the mild reaction conditions and reversibility, this method of oriented immobilization of proteins opens possibilities for the development of biosensors.     

Comparison of multiplexed techniques for detection of bacterial and viral proteins

Immobilized antibody microarrays were compared to the Luminex flow cytometry system that utilizes suspensions of polystyrene microbeads covalently coupled with capture antibodies. The two immunoassays were performed for comparison of reproducibility, limits of detection and dynamic range. The Luminex system showed lower limits of detection and increased dynamic range among samples whereas the protein microarrays could be more amenable to miniaturization. Both technologies were capable of sensitive multiplexed detection.     

Development of a new and simple method for the detection of histidine-tagged proteins

To develop a general method for the detection of histidine-tagged proteins, the interactions of the histidine epitope tag of MutH and MutL proteins with the epitope specific monoclonal anti-His6 antibody were monitored by a label-free direct method using impedance spectroscopy. The immunosensor was fabricated by covalent coupling of the antibody on a conducting polymer coated electrode surface. The impedance of the antibody modified electrode was decreased after binding to the histidine-tagged proteins. The specificity of the sensor was demonstrated by showing that no impedance change was occurred when the sensor was exposed to both of non-tagged MutH and MutL proteins. The specific interaction was further characterized using quartz crystal microbalance studies. Based on impedance measurements, the linear ranges were obtained from 50.0 to 125.0 and 50.0 to 250.0 micorg/ml, for His-tag MutH and His-tag MutL proteins, respectively. The detection limits were determined to be 37.8 and 59.1 microg/ml, for His-tag MutH and His-tag MutL proteins, respectively.     

A novel microfluidic immunoassay system based on electrochemical immunosensors: an application for the detection of NT-proBNP in whole blood

Electrochemical immunosensors have attracted great interest in the search for a selective, simple and reliable system for molecular recognition. Presently, electrochemical immunosensors have been widely studied for biomedical molecular's detection, but the regeneration of these immunosensors has restricted their wide application. To prepare a regeneration-free immunosensor, which may be more suitable for clinical determination, a repeatable immunoassay system was developed based on an electrochemical immunosensor with magnetic nanoparticles, biotin-avidin system (BAS) and Fab antibodies for the heart failure markers aminoterminal pro-brain natriuretic peptides (NT-proBNP). At the same time, a microfluidic system was combined into the proposed system, which enabled continuous determination. Using NT-proBNP as a model system, the proposed immunosensor exhibited rapid and sensitive amperometric response to NT-proBNP with good selectivity, stability, and a wide linear range (0.005-1.67 ng/mL and 1.67-4 ng/mL with a detection limit of 0.003 ng/mL under optimal conditions). Importantly, the proposed immunosensor was also suitable for the detection of other proteins and provided new opportunities for disease diagnosis.     

Trace detection of picloram using an electrochemical immunosensor based on three-dimensional gold nanoclusters

Picloram, a herbicide widely used for broadleaf weed control, is persistent and mobile in soil and water with adverse health and environmental effects. It is important to develop a sensitive method for accurate detection of trace picloram in the environment. In this article, a type of ordered three-dimensional (3D) gold (Au) nanoclusters obtained by two-step electrodeposition using the spatial obstruction/direction of the polycarbonate membrane is reported. Bovine serum albumin (BSA)-picloram was immobilized on the 3D Au nanoclusters by self-assembly, and then competitive immunoreaction with picloram antibody and target picloram was executed. The horseradish peroxidase (HRP)-labeled secondary antibody was applied for enzyme-amplified amperometric measurement. The electrodeposited Au nanoclusters built direct electrical contact and immobilization interface with protein molecules without postmodification and positioning. Under the optimal conditions, the linear range for picloram determination was 0.001-10 μg/ml with a correlation coefficient of 0.996. The detection and quantification limits were 5.0 × 10⁻⁴ and 0.0021 μg/ml, respectively. Picloram concentrations in peach and excess sludge supernatant extracts were tested by the proposed immunosensor, which exhibited good precision, sensitivity, selectivity, and storage stability.     

Quantum dots electrochemical aptasensor based on three-dimensionally ordered macroporous gold film for the detection of ATP

A sensitive electrochemical aptasensor was successfully fabricated for the detection of adenosine triphosphate (ATP) by combining three-dimensionally ordered macroporous (3DOM) gold film and quantum dots (QDs). The 3DOM gold film was electrochemically fabricated with an inverted opal template, making the active surface area of the electrode up to 9.52 times larger than that of a classical bare flat one. 5′-thiolated ATP-binding aptamer (ABA) was first assembled onto the 3DOM gold film via sulfur–gold affinity. Then, 5′-biotinated complementary strand (BCS) was immobilized via hybridization reaction to form the DNA/DNA duplex. Since the tertiary structure of the aptamer was stabilized in the presence of target ATP, the duplex can be denatured to liberate BCS. The reaction was monitored by electrochemical stripping analysis of dissolved QDs which were bound to the residual BCS through biotin-streptavidin system. The decrease of peak current was proportional to the amount of ATP. The unique interconnected structure in 3DOM gold film along with the "built-in" preconcentration remarkably improved the sensitivity. ATP detection with high selectivity, wide linear dynamic range of 4 orders of magnitude and high sensitivity down to 0.01 nm were achieved. The results demonstrated that the novel strategy was feasible for sensitive ATP assay and provided a promising model for the detection of small molecules.     

Chemisorption of proteins and their thiol derivatives onto gold surfaces: characterization based on electrochemical nonlinearity

This study was conducted to monitor the electrochemical responses of two proteins (bovine serum albumin (BSA) and gelatin) and their thiol derivatives adsorbed onto gold (Au) electrodes, which were analyzed by a "nonlinear" impedance method. A sinusoidal voltage is applied to a protein-containing aqueous solution and the waveform of the output current is analyzed by fast Fourier transformation (FFT). The intensities of the higher harmonics in the FFT varied with the species of protein and their thiol derivatives, and with time. From the higher harmonics, voltage-dependent capacitance and conductance were quantitatively evaluated to differentiate the state of adsorbed protein. Adsorption and desorption characteristics of BSA and its thiol derivative on the Au surface were continuously measured by a quartz crystal microbalance (QCM) in situ. The microscopic state of thiol-derivatized BSA adsorbed onto the Au surface was imaged by atomic force microscopy (AFM). In general, thiol-derivatized proteins were tightly adsorbed on the Au surface and showed no desorption. The present electrochemical measurements clearly differentiated adsorption characteristics of physically adsorbed (physisorbed) and chemically adsorbed (chemisorbed) proteins on Au surfaces.     

An electrochemical biosensor for fructosyl valine for glycosylated hemoglobin detection based on core-shell magnetic bionanoparticles modified gold electrode

A high-performance amperometric fructosyl valine (FV) biosensor was developed, based on immobilization of fructosyl amino-acid oxidase (FAO) on core-shell magnetic bionanoparticles modified gold electrode. Chitosan was used to introduce amino groups onto the surface of core-shell magnetic bionanoparticles (MNPs). With FAO as an enzyme model, a new fructosyl valine biosensor was fabricated. The biosensor showed optimum response, when operated at 50 mVs(-1) in 0.1M potassium phosphate buffer, pH 7.5 and 35°C. The biosensor exhibited excellent sensitivity [the detection limit is down to 0.1mM for FV], fast response time (less than 4s), wide linear range (from 0 to 2mM). Analytical recovery of added FV was 95.00-98.50%. Within batch and between batch coefficients of variation were <2.58% and <5.63%, respectively. The enzyme electrode was used 250 times over 3 months, when stored at 4°C.     

Conductometric immunosensors for the detection of staphylococcal enterotoxin B based bio-electrocalytic reaction on micro-comb electrodes

Staphylococcal enterotoxin B (SEB) is one of many toxins produced by the Gram-positive bacterium Staphylococcal aureus. While SEB is known as the causative agent of certain food poisonings it is also considered abiological select agent. Thus, rapid and accurate identification of SEB during either surveillance or in response to a biothreat is critical to the mitigation of the suspect agent. This report presents a new conductometric immune-biosensor for the detection of SEB based on immobilization of horseradish peroxidase (HRP)-labeled SEB antibody (HRP-anti-SEB) onto nanogold/chitosan-multiwalled carbon nanotube (Au/CTS-MWNT)-functionalized biorecognition interface. The formation of the antibody-antigen complex by a simple one-step immunoreaction between the immobilized HRP-anti-SEB and SEB in sample solution introduced a barrier of electrical communication between the immobilized HRP and the base surface, thus local conductivity variations could be evaluated by the bio-electrocatalytic reaction of HRP in 0.02 M PBS (pH 6.8) containing 0.15 mM H(2)O(2), 0.06 M KI and 0.1 M NaCl. Under optimal conditions, the proposed immune-biosensor exhibited a good conductometric response relative to SEB concentration in a linear range from 0.5 to 83.5 ng/ml with a correlation coefficient of 0.998. The developed immune-biosensor showed an acceptable accuracy, reproducibility and stability. Milk samples spiked with various concentrations of SEB gave an average of 116% recovery of the toxin.     

Comparison of surface plasmon resonance and capacitive immunosensors for cancer antigen 125 detection in human serum samples

This paper presents a comparison between surface plasmon resonance (SPR) and capacitive immunosensors for a flow injection label-free detection of cancer antigen 125 (CA 125) in human serum. Anti-CA 125 was immobilized on gold surface through a self-assembled monolayer. Parameters affecting the responses of each system were optimized. Under optimal conditions, SPR provided a detection limit of 0.1 U ml⁻¹ while 0.05 U ml⁻¹ was obtained for the capacitive system. Linearity for SPR was between 0.1 and 40 U ml⁻¹ and 0.05–40 U ml⁻¹ for capacitive system. These immunosensors were applied to analyze CA 125 concentrations in human serum samples and compared with conventional enzyme linked fluorescent assay (ELFA). Both systems showed good agreement with ELFA (P < 0.05). Moreover, these immunosensors were very stable and provided good reproducible responses after regeneration, up to 32 times for SPR and 48 times for capacitive system with relative standard deviation lower than 4%. The SPR immunosensor provided advantages in term of fast response and real-time monitoring while capacitive immunosensor offered a sensitive and cost-effective method for CA 125 detection.     

Fluorescein-labeled “arch-like” DNA probes for electrochemical detection of DNA on gold nanoparticle-modified gold electrodes

In the present study, a gold nanoparticle-modified gold electrode (nanogold electrode) was used to develop a novel fluorescein electrochemical DNA biosensor based on a target-induced conformational change. The nanogold electrode was obtained by electrodepositing gold nanoparticles onto a bare gold electrode. This modification not only immobilized probe oligonucleotides, but also adsorbed fluorescein onto the surface of the gold nanoparticles to form an “arch-like” structure. This article compares the electrochemical signal changes caused by the hybridization of “arch-like” DNA on nanogold electrode and linear DNA on bare gold electrode. The results showed that the adsorption effect of nanogold can enhance the sensitivity of the sensor. The linear range of target ssDNA is from 2.0 × 10⁻⁹ M to 2.0 × 10⁻⁸ M with a correlation coefficient of 0.9956 and detection limit (3σ) of 7.10 × 10⁻¹⁰ M. Additionally, the specificity and hybridization response of this simple sensor were investigated.     

Development of immunosensors for direct detection of three wound infection biomarkers at point of care using electrochemical impedance spectroscopy

A method for label-free, electrochemical impedance immunosensing for the detection and quantification of three infection biomarkers in both buffer and directly in the defined model matrix of mock wound fluid is demonstrated. Triggering Receptor-1 Expressed on Myeloid cells (TREM-1) and Matrix MetalloPeptidase 9 (MMP-9) are detected via direct assay and N-3-oxo-dodecanoyl-l-HomoSerineLactone (HSL), relevant in bacterial quorum sensing, is detected using a competition assay. Detection is performed with gold screen-printed electrodes modified with a specific thiolated antibody. Detection is achieved in less than 1h straight from mock wound fluid without any extensive sample preparation steps. The limits of detection of 3.3 pM for TREM-1, 1.1 nM for MMP-9 and 1.4 nM for HSL are either near or below the threshold required to indicate infection. A relatively large dynamic range for sensor response is also found, consistent with interaction between neighbouring antibody-antigen complexes in the close-packed surface layer. Together, these three novel electrochemical immunosensors demonstrate viable multi-parameter sensing with the required sensitivity for rapid wound infection detection directly from a clinically relevant specimen.     

Comparison of culture, ELISA and PCR techniques for salmonella detection in faecal samples for cattle, pig and poultry

Background

Performances of different salmonella detection methods were evaluated by applying them to of artificially contaminated faecal specimens from cattle, pigs and poultry. The NMKL71 method, being the standard reference method for detection of salmonella in the official Swedish control program, was compared with the proposed ISO method using MSRV-selective enrichment for culturing, and also with three commercial ELISA- based systems, Bioline Selecta, Bioline Optima and Vidas, a commercial PCR-based method, BAX^® system, and three different strategies using PCR detection using a non-commercial PCR system.

Results

Altogether, 391 samples were tested, and the overall results clearly indicate that, when faeces from all animal species and all serotypes were included, the MSRV performed best, with a calculated accuracy of 99% and a calculated sensitivity of 98%. The second most sensitive and specific method was the BAX^® system, using the modified enrichment protocol as recommended by the manufacturer for faecal samples. However, this protocol includes one additional day of work, as compared with the standard procedure for food sample analysis by the same method. The different strategies for salmonella detection using non-commercial PCR showed a sensitivity and specificity in the same range as the BAX^® method; furthermore, results were obtained more quickly. The various commercial ELISA methods and the NMKL method showed the poorest performance of the methods included in the study, and were closely dependent on the origin of the faeces used and on which salmonella strain was to be detected.

Conclusion

The study showed that the sensitivity of the different methods depended to a great extent on the origin of the faecal matrices and the salmonella strains used to "spike" the samples.     

Comparison of silver, gold and modified platinum electrodes for the electrochemical detection of iodide in urine samples following ion chromatography

The electrochemical (EC) detection of iodide at gold, silver and platinum electrodes under similar experimental conditions was evaluated. To achieve optimal amperometric detection, the electrode sensitivity, selectivity, and stability was compared. Isocratic separation of iodide was attained by ion chromatography (IC) using an anion-exchange column with nitrate as an eluent ion (25 mM HNO(3) + 50 mM NaNO(3)). Although the Ag electrode showed the highest selectivity due to the relatively low applied potential (+0.10 V versus Ag|AgCl), it requires continuous surface polishing upon injection of standard solutions or real samples; in addition, the chromatographic peak of iodide exhibited a pronounced dip-tailing. The limit of detection (LoD) of iodide was estimated to be 3.5 microg/L (S/N=3) with an injection volume of 50 microL. Likewise, pulsed electrochemical detection at the silver electrode did not demonstrate the expected results in terms of peak shape and low detection limit. Using the same chromatographic conditions, iodide detection at the Au electrode (E(app)= +0.80 V versus Ag|AgCl) exhibited a regular peak shape accompanied by a sensitivity comparable to the silver one. Yet, upon continuous injections the signal intensity displayed a progressive lowering up to ca. 40% in 6h. Best results in terms of signal stability, peak shape and analytical response were obtained with a modified platinum electrode which allowed to achieve a LoD of 0.5 microg/L (S/N=3). The present IC-EC detection method using a modified Pt electrode (E(app)= +0.85 V versus Ag|AgCl) was successfully applied to determine low contents of iodide in human urine with solid phase extraction as pretreatment. Such a developed method correlated very well with the reference colorimetric method in urine (r=0.95273), and it is specifically suggested when the iodide content is relatively low, i.e., <20 microg/L.     

Comparison of culture and insemination techniques for equine oocyte transfer

This study was designed to test 3 approaches for insemination and transfer of oocytes to recipient mares. Oocytes were recovered transvaginally from naturally cycling donor mares 24 to 26 h after an intravenous injection of 2500 IU of hCG when follicles reached 35 mm in diameter. Multiple oocytes (1 to 4) were transferred surgically into the oviducts of 4 or 5 recipient mares per group. Three groups of transfers were compared: 1) transfer of oocytes cultured in vitro for 12 to 14 h postcollection with insemination of the recipient 2 h postsurgery; 2) transfer of oocytes into the oviduct within 1 h of collection, with completion of oocyte maturation occurring within the oviduct, and insemination of the recipient 14 to 16 h postsurgery; and 3) transfer of spermatozoa and oocytes (cultured 12 to 14 h in vitro) into the oviduct. Numbers of embryos detected by Day 16 of gestation were not different (P>0. 1) for groups 1, 2, and 3 (57%, 43% and 27%). Therefore, equine oocytes successfully completed the final stages of maturation within the oviduct, and sperm deposited within the oviduct were capable of fertilizing oocytes.     

Optimization of DNA immobilization on gold electrodes for label-free detection by electrochemical impedance spectroscopy

The ability to immobilize DNA probes onto gold substrates at an optimum surface density is key in the development of a wide range of DNA biosensors. We present a method to accurately control probe DNA surface density by the simultaneous co-immobilization of thiol modified probes and mercaptohexanol. Probe surface density is controlled by the thiol molar ratio in solution, with a linear relationship between thiol molar ratio and probe density spanning (1-9) x10(12)/cm2. The probe surface density per microscopic surface area was determined using chronocoulometry, and a detailed analysis of the method presented. Using this sample preparation method, the effect of probe density and hybridization on the charge transfer resistance with the negatively charged ferri/ferrocyanide redox couple was determined. Above a threshold probe surface density of 2.5 x 10(12)/cm2, electrostatic repulsion from the negatively charged DNA modulates the charge transfer resistance, allowing hybridization to be detected. Below the threshold density no change in charge transfer resistance with probe density or with hybridization occurs. The probe surface density was optimized to obtain the maximum percentage change in charge transfer resistance with hybridization.     

Comparison of methods of liquid medium culture for banana micropropagation

Five different liquid medium culture methods for meristem propagation of bananas were investigated and compared with solid medium culture. Treatments studied were: gelled culture medium (treatment 1); liquid medium with immersion of the plants (treatment 2); liquid medium with cellulose culture support (treatment 3); liquid medium with partial immersion of the plants (treatment 4); liquid medium aerated by bubbling (treatment 5); liquid medium with temporary immersion of the explants for 20 min every 2h (treatment 6). After 20 days of culture, three culture groups with statistically different multiplication rates were observed:

-shoots in simple liquid medium and those on cellulose substrate proliferated little or not at all,

-shoots on gelled medium, those subjected to partial immersion and those in aerated medium displayed multiplication rates of 2.2 to 3.1, and

-the highest multiplication rate (>5) was observed in explants subjected to temporary immersion in the medium.

Two groups of treatments differed in the accumulation of dry matter: the smallest weight (around 0.5 g) was observed in treatment 1, 2, 3 and 4, and accumulation was 2 to 5 times greater in the explants in aerated liquid medium and those subjected to temporary immersion. The highest multiplication rates and weight gains were observed in aerated treatments (treatments 4 and 5). Shoots in liquid medium continuously aerated by bubbling displayed hyperhydricity of the outer leaf sheaths. This was not observed with temporary immersion of explants.     

Screening of boldenone and methylboldenone in bovine urine using disposable electrochemical immunosensors

Electrochemical based immunosensors for the detection of boldenone and methylboldenone in bovine urine were described in this paper. The immunosensors were fabricated by immobilizing boldenone-bovine serum albumin conjugate on the surface of screen-printed electrodes (SPEs), and followed by the competition between the free analyte and coating conjugate with corresponding antibodies. The use of anti-species IgG-horseradish peroxidase conjugate determined the degree of competition. The electrochemical technique chosen was chronoamperometry, performed at a potential of +100 mV whereby the product of the catalysis of 3,3′,5,5′-tetramethylbenzidine undergoes reduction produced by the enzyme label. The limits of detection of assay were 30.9 ± 4.3 pg ml⁻¹ for boldenone and 120.2 ± 8.2 pg ml⁻¹ for methylboldenone, respectively. Results of repeated analysis of each androgen carried out using three different batches of electrodes indicate suitable repeatability (EC₅₀ = 1.0 ± 0.3 ng ml⁻¹ (n = 3, N = 3), R² = 0.969, R.S.D. = 9.6% for boldenone and 1.5 ± 0.3 ng ml⁻¹, 0.971, 10.5% for methylboldenone, respectively). Urine samples were determined directly after a single dilution step, omitting extraction and hydrolysis. This method offers the advantage to pick up both boldenone and its major metabolites in an efficient manner due to the high cross-reactivity pattern of α-boldenone with this antibody. The concentration of methylboldenone in urine detected by developed methods does indicate methylboldenone administration to heifers. Gas chromatography coupled to mass spectrometry analysis was performed to quantitate the individual metabolites present in urine samples, and results were validated with both ELISA and immunosensor data.     

Highly sensitive electrochemical detection of immunospecies based on combination of Fc label and PPD film/gold nanoparticle amplification

A highly sensitive electrochemical immunoassay strategy based on the combination of ferrocene (Fc) label and poly(o-phenylenediamine) (PPD) film/gold nanoparticle (GNP) amplification for the detection of immunospecies is proposed using human IgG as the model analyte. A gold electrode is firstly modified with an electropolymerized film of poly(o-phenylenediamine), which provides a stable matrix with abundant amino-groups for the fabrication of sensing interface. Using glutaraldehyde as a cross-linker, cystamine is coupled onto the modified electrode. Subsequently, gold nanoparticle monolayer is assembled onto the resulting surface. Making use of the unique properties of gold nanoparticles, antibodies can be self-assembled onto the surface-confined gold nanoparticles via amine-Au affinity with a high loading amount and reserve high immunological activity. After the introduction of model analyte, the ferrocene (Fc)-labeled antibody is immobilized on the sensing interface by antibody-antigen specific reaction, resulting in a redox current signal. The peak current is proportional to the amount of the analyte. Under the optimized experimental conditions, the proposed sensing strategy provides a wide linear dynamic range from 25 to 1000pg/mL with a low detection limit of 10pg/mL. In addition, good reproducibility, high selectivity and stability are achieved. In particular, the extremely high stability of both poly(o-phenylenediamine) and gold nanoparticle monolayer allows the designed biosensing interface to withstand harsh regeneration treatment, making it reusable.     

Comparison between two techniques for endometrial swab culture and between biopsy and culture in barren mares

The endometria of 77 barren mares was swabbed simultaneously using a swab guarded with a single cannula and distal, gelatin capsule (completely guarded swab - CGS) and a partially guarded swab (PGS) with an open cannula. Sheep blood (5%) agar plates were inoculated with each swab, while MacConkey's agar plates were inoculated with the swabs from 44 mares. The presence of bacterial or fungal growth was determined after 24 and 48 hours of aerobic incubation at 37 C. Organisms present were identified, counted, and categorized as saprophytic or pathogenic flora. The endometria of all mares were biopsied immediately following swabbing. Histologic evidence of inflammation in biopsy specimens was classified as (1) none, (2) slight, discrete, focal, and (3) slight or moderate, diffuse, widespread infiltration of inflammatory cells. The number of inflammatory cells migrating through the luminal epithelium was counted and averaged. There were significantly fewer CGS than PGS cultures that yielded growth at 24 and 48 hours of incubation after being streaked on blood agar and MacConkey's agar plates. There were fewer pathogenic bacterial or fungal colonies present at 48 hours of incubation on blood agar plates after being streaked with CGS as compared to PGS. There were no differences in the number of pathogenic bacterial or fungal colonies present at 24 hours of incubation on blood agar or at 24 and 48 hours of incubation on MacConkey's agar plates. There was no correlation between CGS or PGS culture of pathogens and severity of histologic inflammation. There was a positive correlation between culture of pathogens and number of inflammatory cells migrating through the luminal epithelium.