Solid-phase extraction of liquiritin and glycyrrhizin from licorice using porous alkyl-pyridinium polymer sorbent

Introduction – Liquiritin and glycyrrhizin are valuable components of licorice. An effective separation and determination procedure is needed to separate the liquiritin and glycyrrhizin from the licorice extract. Methodology – A polymer‐confined, ionic liquid sorbent was developed using a process involving polymerisation and modification. The obtained porous particles were used as a sorbent in a solid‐phase extraction process to isolate liquiritin and glycyrrhizin from licorice with different washing and elution solvents. The porous alkyl‐pyridinium polymer sorbent was compared with the C₁₈ sorbent. Results – A simple and convenient method was established to the selectively separate and determinate of liquiritin and glycyrrhizin using a porous ionic liquid‐based polymer coupled with HPLC. Additionally, this study evaluated the application of this sorbent for the detection of these two compounds in commercial medicines. Conclusion – This method was a viable tool that was compatible with the existing HPLC methods and was used to separate and analyse the content of liquiritin and glycyrrhizin in licorice. Copyright © 2010 John Wiley & Sons, Ltd.     

β-Carotene extraction from Dunaliella salina by supercritical CO2

This paper reports the results of supercritical carbon dioxide (scCO₂) extraction of β-carotene from Dunaliella salina as potential alternative to conventional organic solvent extraction. In pilot-scale scCO₂ experiments, the pressure, temperature, and co-solvent concentration were varied. The supercritical extraction at 500 bar, 70 °C, and 10 wt% ethanol as co-solvent yielded in the highly efficient pigment recovery of over 90%. Techno-economic assessment demonstrated higher energy consumption for the scCO₂ extraction that was compensated by lower solvent costs. Thus, comparable pigment production costs to the reference extraction with n-hexane were estimated for the scCO₂ process. Due to the green solvent properties of scCO₂ and ethanol, this approach is highly promising for extraction of algal biomass in industrial scale.

     

Development of a protocol for supercritical carbon dioxide extraction of ubiquinone-10 from dried biomass of <Emphasis Type="Italic">Pseudomonas diminuta</Emphasis>

Ubiquinone (Coenzyme Q10, CoQ10), a yellow-to-orange-colored lipophilic substance having nutraceutical value, was extracted from dried biomass of Pseudomonas diminuta using supercritical carbon dioxide (SC-CO₂). The effect of different operational parameters (temperature, pressure, and extraction time) and addition of co-solvent on SC-CO₂ extraction of CoQ10 was studied in detail. The solubility parameter of CoQ10, CO₂, and CO₂ with ethanol and methanol as co-solvents was calculated and validated with experimental results. Theoretically, ethanol and methanol had significant effect as co-solvent, and the difference between the two was only marginal. A maximum recovery of 22.33% was obtained using pure SC-CO₂ at 40 °C, 150 bar, and run time of 60 min. Ethanol as co-solvent at 3 mL/g of dried biomass at 40 °C and 150 bar increased the recovery from 22.33 to 68.57%. Further optimization of the extraction conditions by Box–Behnken design effectively increased the recovery to 96.2%. The optimized conditions were a temperature of 38 °C, pressure of 215 bar, and run time of 58 min.     

Omega-3 fatty acids concentrate production by enzyme-catalyzed ethanolysis of supercritical CO<Subscript>2</Subscript> extracted oyster oil

The separation of oil by a suitable technique from the Pacific oyster muscle is important for the utilization of the oil as a ω-3 polyunsaturated fatty acids (ω-3 PUFAs) source and production of bio-functional peptides/ oligosaccharides from oil-free residue. This study was conducted to prepare ω-3 PUFAs concentrate from supercritical carbon dioxide (SC-CO₂) extracted Pacific oyster oil by enzyme-catalyzed ethanolysis reactions. SC-CO₂ extractions were done at different temperatures and pressures to optimize suitable extraction conditions and extracted oils were compared with Soxhlet (n-hexane) extracted oil to evaluate the yield and quality. Oil extracted by SC-CO₂ at optimized conditions was used for ethanolysis reaction catalyzed by immobilized sn-1,3 specific lipases, namely Novozymes-435, Lipozyme TLIM, and Lipozyme RMIM to produce 2-monoacylglycerols (2-MAG) rich in ω-3 PUFAs. The optimum temperature and pressure for SC-CO₂ extractions of oyster oil was 50°C and 30 MPa. In this condition, the yield of oil was 5.96% and the acid, peroxide, free fatty acid, and p-anisidine values were 4.49 mg KOH/g, 4.72 meq/kg, 3.42%, and 10.03, respectively. The ω-3 PUFAs content significantly increased in 2-MAG obtained from Novozymes 435, Lipozyme TLIM, and Lipozyme RMIM to 43.03 ± 0.36, 45.95 ± 0.29, and 40.50 ± 0.77%, respectively (p < 0.05). A thin layer chromatography (TLC) analysis confirmed the production and separation of 2-MAG in the ethanolysis process. The ratio of total ω-3 to ω-6 fatty acids was almost twice in 2-MAG of SC-CO₂ extracted oyster oil. SC-CO₂ extracted Pacific oyster oil can be used for sn-1,3 specific lipases catalyzed ethanolysis to produce ω-3 PUFAs rich in 2-MAG.     

Simultaneous extraction and separation of liquiritin,glycyrrhizic acid,and glabridin from licorice root with analytical and preparative chromatography

Simultaneous extraction and separation of liquiritin, glycyrrhizic acid, and glabridin from licorice were developed by liquidliquid extraction with liquid chromatography separation. By utilizing different extraction solvents, procedures, and times, the optimum extraction conditions were established. The extracts of licorice were separated and determined using a C₁₈ column with a mobile phase consisting of acetonitrile-water (containing 1.0% acetic acid) with a gradient elution of 0∼10 min from 20:80 to 60:40 (v/v). Preparative columns with different packing sizes were investigated to isolate the three compounds from the extracts of licorice. The 12 μm chromatographic column showed better separation for the three compounds from licorice. 0.29 mg/g for liquiritin, 1.43 mg/g for glycyrrhizic acid, and 0.07 mg/g for glabridin were obtained and the recoveries were 80.8, 89.7, and 72.5%, respectively.     

Application of modified supercritical carbon dioxide extraction to microbial quinone analysis

Supercritical carbon dioxide (scCO₂) was applied to extract microbial quinones from activated sludge. Identification and analysis was then performed using high-performance liquid chromatography (HPLC) equipped with ultraviolet–visible (UV–Vis) detector and photodiode array detector (PDA). Extracted microbial quinones were trapped and separated as menaquinones (MK) and ubiquinones (Q) species using two Sep-Pak Plus Silica cartridges joined in series. Four ubiquinones and 12 menaquinones species were identified in 0.1 g dried activated sludge based on retention time and spectrum analysis. Among the tested various polar solvents, methanol showed to be the best modifier, based on the highest total quinone content extracted and the lowest dissimilarity index. The diversity index of quinone and the number of quinone species using methanol-modified scCO₂ were similar to that of the conventional method (organic solvent extraction).     

Microwave-assisted extraction of glycyrrhizic acid from licorice root

In the present study, a microwave-assisted extraction (MAE) technique has been developed for the extraction of glycyrrhizic acid (GA) from licorice root. Various experimental conditions, such as extraction time, different ethanol and ammonia concentration, liquid/solid ratios, pre-leaching time before MAE and material size for the MAE procedure were investigated to optimize the efficiency of the extraction. Under appropriate MAE conditions, such as extraction times of 4-5min, ethanol concentrations of 50-60% (v/v), ammonia concentrations of 1-2% (v/v) and liquid/solid ratios of 10:1(ml/g), the recovery of GA from licorice root with MAE was equivalent with conventional extraction methods. Those methods include extraction at room temperature (ERT), the traditional Soxhlet extraction, heat reflux extraction and ultrasonic extraction. Due to the considerable savings in time and solvent, MAE was more effective than the conventional methods. This novel method is suitable for fast extraction of GA from licorice root.     

Supercritical fluid extraction of lipids from the heterotrophic microalga Crypthecodinium cohnii

Microalgae biomass can be a feasible source of ω‐3 fatty acids due to its stable and reliable composition. In the present study, the Crypthecodinium cohnii growth and docosahexaenoic acid (DHA, 22:6ω3) production in a 100 L glucose‐fed batch fermentation was evaluated. The lipid compounds were extracted by supercritical carbon dioxide (SC‐CO₂) from C. cohnii CCMP 316 biomas, was and their fatty acid composition was analysed. Supercritical fluid extraction runs were performed at temperatures of 313 and 323 K and pressures of 20.0, 25.0 and 30.0 MPa. The optimum extraction conditions were found to be 30.0 MPa and 323 K. Under those conditions, almost 50% of the total oil contained in the raw material was extracted after 3 h and the DHA composition attained 72% w/w of total fatty acids. The high DHA percentage of total fatty acids obtained by SC‐CO₂ suggested that this extraction method may be suitable for the production of C. cohnii value added products directed towards pharmaceutical purposes. Furthermore, the fatty acid composition of the remaining lipid fraction from the residual biomass with lower content in polyunsaturated fatty acids could be adequate for further uses as feedstock for biodiesel, contributing to the economy of the overall process suggesting an integrated biorefinery approach.     

Application of a new amidophosphite ligand to Rh‐catalyzed asymmetric hydrogenation of β‐dehydroamino acid derivatives in supercritical carbon dioxide: Activation effect of protic co‐solvents

New chiral amidophosphite ligand was synthesized and tested in the Rh‐catalyzed asymmetric hydrogenation of (Z)‐β‐(acylamino)acrylates in protic solvents and supercritical carbon dioxide (scCO₂) The catalytic performance is affected greatly by the acidity of the solvents. Better enantioselectivity (up to 88% ee) was achieved in scCO₂ containing 1,1,1,3,3,3‐hexafluoro‐2‐propanol, compared to neat protic solvents. Chirality, 2011. © 2011 Wiley‐Liss, Inc.     

Supercritical fluid extraction of selected pharmaceuticals from water and serum

Selected drugs from benzodiazepine, anabolic agent and non-steroidal anti-inflammatory drug (NSAID) therapeutic classes were extracted from water and serum using a supercritical CO₂ mobile phase. The samples were extracted at a pump pressure of 329 MPa, an extraction chamber temperature of 45°C, and a restrictor temperature of 60°C. The static extraction time for all samples was 2.5 min and the dynamic extraction time ranged from 5 to 20 min. The analytes were collected in appropriate solvent traps and assayed by modified literature HPLC procedures. Analyte recoveries were calculated based on peak height measurements of extracted vs. unextracted analyte. The recovery of the benzodiazepines ranged from 80 to 98% in water and from 75 to 94% in serum. Anabolic drug recoveries from water and serum ranged from 67 to 100% and 70 to 100%, respectively. The NSAIDs were recovered from water in the 76 to 97% range and in the 76 to 100% range from serum. Accuracy, precision and endogenous peak interference, if any, were determined for blank and spiked serum extractions and compared with classical sample preparation techniques of liquid-liquid and solid-phase extraction reported in the literature. For the benzodiazepines, accuracy and precision for supercritical fluid extraction (SFE) ranged from 1.95 to 3.31 and 0.57 to 1.25%, respectively (n=3). The SFE accuracy and precision data for the anabolic agents ranged from 4.03 to 7.84 and 0.66 to 2.78%, respectively (n=3). The accuracy and precision data reported for the SFE of the NSAIDs ranged from 2.79 to 3.79 and 0.33 to 1.27%, respectively (n=3). The precision of the SFE method from serum was shown to be comparable to the precision obtained with other classical preparation techniques.     

Efficient phase separation and product recovery in organic‐aqueous bioprocessing using supercritical carbon dioxide

Biphasic hydrocarbon functionalizations catalyzed by recombinant microorganisms have been shown to be one of the most promising approaches for replacing common chemical synthesis routes on an industrial scale. However, the formation of stable emulsions complicates downstream processing, especially phase separation. This fact has turned out to be a major hurdle for industrial implementation. To overcome this limitation, we used supercritical carbon dioxide (scCO₂) for both phase separation and product purification. The stable emulsion, originating from a stereospecific epoxidation of styrene to (S)‐styrene oxide, a reaction catalyzed by recombinant Escherichia coli, could be destabilized efficiently and irreversibly, enabling complete phase separation within minutes. By further use of scCO₂ as extraction agent, the product (S)‐styrene oxide could be obtained with a purity of 81% (w/w) in one single extraction step. By combining phase separation and product purification using scCO₂, the number of necessary workup steps can be reduced to one. This efficient and easy to use technique is generally applicable for the workup of biphasic biocatalytic hydrocarbon functionalizations and enables a cost effective downstream processing even on a large scale. Biotechnol. Bioeng. 2010;107:642–651. © 2010 Wiley Periodicals, Inc.     

Variations in the chemical profile and biological activities of licorice (Glycyrrhiza glabra L.), as influenced by harvest times

This study investigates the variations in the chemical profile, free radical scavenging, antioxidant and gastroprotective activities of licorice extracts (LE) from plants harvested during the months of February to November. Correlations between biological properties and the chemical composition of LE were also investigated. The results showed that the total contents of phenols, flavonoids and tannins in LE varied at different harvest times. Liquiritin and glycyrrhizin, the major components of LE, varied in the range of 28.65–62.80 and 41.84–114.33 mg g^?1, respectively. The relative proportion of glycyrrhizin derivative (3), glabridin (4), glabrene (5) and liquiritigenin derivative (6), varied in the range of 0.88–11.38 %, 1.86–10.03 %, 1.80–18.40 % and 5.53–16.31 %, respectively. These fluctuations correlated positively with changes in the antioxidant and free radical scavenging activities of licorice. In general, the samples from May and November showed the most favorable free radical scavenging and antioxidant effects, whereas the best gastroprotective effect was in May. Liquiritin and glycyrrhizin, the major constituents in the February and May LE, appeared to contribute to the superoxide radical scavenging and gastroprotective effects. Glabridin and glabrene, the compounds with the highest relative proportion in the November LE, accounted for the antioxidant and DPPH scavenging activities of licorice. It is concluded that the chemical profile of licorice quantitatively varied at different harvest times and these fluctuations determined changes in its bioactivities. These data could pave the way to optimize harvesting protocols for licorice in relation with its health-promoting properties.     

Isolation of off-flavors and odors from tuna fish oil using supercritical carbon dioxide

Off-flavors and unfavorable odors in tuna fish oil were successfully removed and identified using supercritical carbon dioxide extraction, while retaining variable compounds, polyunsaturated fatty acids such as EPA (eicosapentaenoic acid) and DHA (docosahexaenoic acid). Samples of oil were extracted in a 100 mL semi-batch stainless steel vessel under conditions which ranged from 8 to 20 MPa and 20 to 60°C with solvent (CO₂) flows from 10 g/min. GC-MS was used to identify the main volatile components contributing to the off-flavors and odors which included 2-methyl-1-propanol, 2,4-hexadienal, cyclopropane, and octadiene. Analyses of oil extracted at 40°C, 20 MPa showed a 99.8% reduction in dimethyl disulfide. Other significant off-flavors identified were 2-methyl-butene, 3-hydroxy butanal and ethylbenzene.     

Comparison of three different extraction methods and HPLC determination of the anthraquinones aloe‐emodine,emodine, rheine,chrysophanol and physcione in the bark of Rhamnus alpinus L. (Rhamnaceae)

Introduction – Rhamnus alpinus L. (Rhamnaceae), a traditional plants in the flora of the Abruzzo region, is known to contain active anthraquinone secondary metabolites. However, the content of anthraquinones varies among R. alpinus samples depending on collection season and site. Thus, using simple, reliable and accurate analytical methods for the determination of anthraquinones in R. alpinus extracts allows comparative study of different methods of extraction. Objective – After a partial validation of an HPLC method for the simultaneous determination of five anthraquinones, aloe‐emodine, rheine, emodine, chrysophanol and physcione, in the bark of R. alpinus, we compared three different methods of extraction. Methodology – Anthraquinones were extracted from the bark of R. alpinus using different techniques (methanol maceration, ultrasonic and supercritical CO₂ extraction). Separation and quantification of anthraquinones were accomplished using a reversed‐phase C₁₈ column with the mobile phase of H₂O–methanol (40 : 60, v/v, 1% formic acid) at a wavelength of 254 nm. The qualitative analyses were also achieved at wavelength of 435 nm. Results – All calibration curves were linear over the concentration range tested (10–200 mM) with the determination coefficients ≥0.991. The detection limits (S/N = 3) were 5 mM for each analytes. All five anthraquinones were found in the samples tested at concentrations reported in experimental data. Conclusion – The described HPLC method and optimised extraction procedure are simple, accurate and selective for separation and quantification of anthraquinones in the bark of R. alpinus and allow evaluation of the best extraction procedure between the tested assays. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile biocatalytic synthesis of a macrocyclic lactone in sub- and supercritical solvents

Abstract

High yield and selectivity in the intramolecular synthesis of the macrocyclic lactone oxacyclohexadecan-2-one were achieved via a straightforward biocatalytic synthesis utilising non-conventional solvents: supercritical carbon dioxide (scCO₂), ethane, fluoroform and 1,1,1,2-tetrafluoroethane. Batch and continuous syntheses were demonstrated with a higher yield attained in a continuous synthesis using in-situ product extraction by scCO₂. A remarkably high yield was obtained in 1,1,1,2-tetrafluoroethane at batch conditions.     

Ultrasound-assisted aqueous extraction of total flavonoids and hydroxytyrosol from olive leaves optimized by response surface methodology

Abstract

Olive leaves were often extracted with methanol or ethanol at different proportions. In this study, ultrasound-assisted aqueous extraction was adopted for olive leaf extraction. The yields of total flavonoids (TF) and hydroxytyrosol (HT) were optimized by central composite experimental design. Two second-order polynomial equations were established to quantify the relationship between the responses and the processing parameters. Under the optimal condition of extracting at 60?°C for 60?min with the solvent-to-material ratio of 40, TF and HT amounted to 57.31?±?0.35 and 1.80?±?0.02?mg/g dry leaves (DL), respectively. The scavenging rate of all extracts against α, α-diphenyl-β-picrylhydrazyl (DPPH) and hydroxyl free radicals was screened. The integrated scores, representing both active ingredients and antioxidant capacity of the extracts, were calculated by principle component analysis (PCA). The optimal extract gained the highest score in PCA. In addition, compared to the extracts from 80% methanol to 44% ethanol, the ultrasound-assisted aqueous extract was richer in TF, HT, and polyphenols, while it also presented stronger ferric reducing antioxidant power (FRAP), but poorer strength to quench hydroxyl radicals. The study indicated that the aqueous extract of olive leaves may present broad potential opportunities in health-care sector.     

Estrogenic activities of extracts of Chinese licorice (Glycyrrhiza uralensis) root in MCF-7 breast cancer cells

Despite the wide use of Chinese licorice root (Glycyrrhiza uralensis) for the treatment of menopausal complaints, little is known on its potential estrogenic properties, and available information relative to its effects on cell proliferation is contradictory. In this study, the estrogenic properties of licorice root were evaluated in vitro by use of several assays. The effects of increasing concentrations of a DMSO extract of licorice root on the growth of MCF-7 breast cancer cells were biphasic. The extract showed an ER-dependent growth-promoting effect at low concentrations and an ER-independent anti-proliferative activity at high concentrations. In further experiments, licorice root was sequentially extracted to yield four fractions: hexane, EtOAc, methanol and H₂O. Only the EtOAc extract had effects on cell proliferation similar to the DMSO extract. The hexane extract had no effect on cell growth. In contrast, the methanol and water extracts showed an ER-independent, growth-promoting effect. Similar to its effects on cell proliferation, the EtOAc extract had a biphasic effect on S phase cell cycle distribution and the level of PCNA protein. This extract-induced transactivation of endogenous ERα in MCF-7 cells, supported by inducing down-regulation of ERα protein and mRNA levels, and up-regulation of ERα target genes pS2 and GREB1. These results suggest that the activity of licorice root and the balance between increased risk for cancer and prevention of estrogen-dependent breast cancer may depend on the amount of dietary intake.     

Extraction of Oils from Wheat Germ with Supercritical Carbon Dioxide

The separation of oil from wheat germ by extracting with supercritical carbon dioxide (C0₂) is described. The solubility of wheat germ oil in supercritical C0₂ at 200 atm and 40°C was about 0.35 weight%. The effect of pressure on the extraction process with liquid or supercritical C0₂ was of great significance. On the other hand, the effect of temperature on the extraction process was small. Oil extracted with supercritical C0₂ was lighter in color and contained less phosphorus than that extracted with hexane. The contents of α- and β-tocopherol in the oil extracted with supercritical CO₂. were comparable to those in the hexane-extracted oil     

Protein extraction by Winsor‐III microemulsion systems

Proteins (bovine serum albumin (BSA), α‐chymotrypsin, cytochrome c, and lysozyme) were extracted from 0.5 to 2.0 g L^?1 aqueous solution by adding an equal volume of isooctane solution that contained a surfactant mixture (Aerosol‐OT, or AOT, and a 1,3‐dioxolane (or cyclic ketal) alkyl ethoxylate, CK‐2,13‐E_5.6), producing a three‐phase (Winsor‐III) microemulsion with a middle, bicontinuous microemulsion, phase highly concentrated in protein (5–13 g L^?1) and small in volume (12–20% of entire volume). Greater than 90% forward extraction was achieved within a few minutes. Robust W‐III microemulsion systems were formulated at 40°C, or at 25°C by including a surfactant with shorter ethoxylate length, CK‐2,13‐E₃, or 1.5% NaCl (aq). Successful forward extraction correlated with high partitioning of AOT in the middle phase (>95%). The driving force for forward extraction was mainly electrostatic attractions imposed by the anionic surfactant AOT, with the exception of BSA at high ionic strength, which interacted via hydrophobic interactions. Through use of aqueous stripping solutions of high ionic strength (5.0 wt %) and/or pH 12.0 (to negate the electrostatic attractive driving force), cytochrome c and α‐chymotrypsin were back extracted from the middle phase at >75% by mass, with the specific activity of recovered α‐chymotrypsin being >90% of its original value. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Simultaneous Measurement of Fluoroquinolones in Eggs by a Combination of Supercritical Fluid Extraction and High Pressure Liquid Chromatography

Simultaneous detection of the fluoroquinolone antibiotics ciprofloxacin, enrofloxacin, ofloxacin, and norfloxacin in eggs by a combination of supercritical fluid extraction (SFE) and high pressure liquid chromatography (HPLC) was studied. Lipid matrices that have been considered to result in poor extraction and isolation of fluoroquinolones in eggs were removed first by SFE with supercritical CO₂ alone, and then the fluoroquinolones were extracted by SFE with supercritical CO₂ containing 20% (v/v) methanol for HPLC analysis. A time-course study of the extraction of lipid matrices of eggs suggested that the SFE method successfully removed the matrices within 20 min. When the fluoroquinolones added to control eggs were extracted by SFE, the extraction efficiency was similar to that by the solvent extraction method, giving the recovery percentages from 83 to 96% in a 40 min-extraction time. The fluoroquinolones extracted from eggs by SFE were analyzed simultaneously by HPLC equipped with a fluorescence detector with detection sensitivity at about 10 ppb for the detection limit. The standard calibration profiles of fluoroquinolones showed linear responses to HPLC, showing more than 0.995 for the mean r ² value. This is the first report of the simultaneous measurement of fluoroquinolones in eggs by a combination of SFE and HPLC. Using the SFE method allowed us to avoid extensive sample preparation such as solvent extraction and chromatographic cleanup that are basically required in extraction of fluoroquinolones.