Viability of free and encapsulated Escherichia coli overexpressing cyclopentanone monooxygenase monitored during model Baeyer–Villiger biooxidation by confocal laser scanning microscopy

Baeyer–Villiger biooxidation of 4-methylcyclohexanone–5-methyloxepane-2-one catalysed by recombinant Escherichia coli overexpressing cyclopentanone monooxygenase encapsulated in polyelectrolyte complex capsules was used to investigate effect of substrate conversion on the viability of cells. Confocal laser scanning microscopy (CLSM) was used to assess cell viability using propidium iodide fluorescence marker for necrosis, and flavin autofluorescence to identify living bacteria. Viability of encapsulated cells decreased with increasing substrate concentration from 99 ± 1 to 83 ± 4%, while substrate conversions from decreased 100 to 6 ± 1%. Storage stabilization of encapsulated cells was observed by increased substrate conversion form 68 ± 2 to 96 ± 3%. Measurements by CLSM with standard deviations up to 5% may be regarded as powerful tool for recombinant cell viability determination during Baeyer–Villiger biooxidations.     

Direct insertion of proteins into a living cell using an atomic force microscope with a nanoneedle

We have developed a tool for directly inserting proteins into living cells by using atomic force microscopy (AFM) and an ultrathin needle, termed a nanoneedle. The surface of the nanoneedle was modified with His-tagged proteins using nickel chelating nitrilotriaceticacid (NTA). The fluorescent proteins, DsRed2-His₆ and EGFP-His₆, could be attached to and detached from the surface of the nanoneedle. These results suggest that the Ni-NTA modified nanoneedle can successfully be used for specific delivery of proteins. The nanoneedle modified with DsRed2-His₆ was able to penetrate the surface of a living HeLa cell, as confirmed by laser scanning fluorescence microscopy and monitoring an exerting force on the nanoneedle using AFM. Force curves using the nanoneedle indicated that the needle was able to penetrate at displacement speeds of 0.10–10 μm/s. These results suggest that this technique can be used to directly insert proteins into living cells and is applicable for modulation or regulation of single cell activity.     

Combining multiple fluorescence imaging techniques in biology: when one microscope is not enough

While fluorescence microscopy has proven to be an exceedingly useful tool in bioscience, it is difficult to offer simultaneous high resolution, fast speed, large volume, and good biocompatibility in a single imaging technique. Thus, when determining the image data required to quantitatively test a complex biological hypothesis, it often becomes evident that multiple imaging techniques are necessary. Recent years have seen an explosion in development of novel fluorescence microscopy techniques, each of which features a unique suite of capabilities. In this Technical Perspective, we highlight recent studies to illustrate the benefits, and often the necessity, of combining multiple fluorescence microscopy modalities. We provide guidance in choosing optimal technique combinations to effectively address a biological question. Ultimately, we aim to promote a more well-rounded approach in designing fluorescence microscopy experiments, leading to more robust quantitative insight.     

<Emphasis Type="Italic">Escherichia coli,Pseudomonas aeruginosa</Emphasis>, and<Emphasis Type="Italic"> Staphylococcus aureus</Emphasis> Attachment Patterns on Glass Surfaces with Nanoscale Roughness

Attachment tendencies of Escherichia coli K12, Pseudomonas aeruginosa ATCC 9027, and Staphylococcus aureus CIP 68.5 onto glass surfaces of different degrees of nanometer-scale roughness have been studied. Contact-angle and surface-charge measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM) were employed to characterize substrata and bacterial surfaces. Modification of the glass surface resulted in nanometer-scale changes in the surface topography, whereas the physicochemical characteristics of the surfaces remained almost constant. AFM analysis indicated that the overall surface roughness parameters were reduced by 60–70%. SEM, CLSM, and AFM analysis clearly demonstrates that although E. coli, P. aeruginosa and S. aureus present significantly different patterns of attachment, all of the species exhibited a greater propensity for adhesion to the “nano-smooth” surface. The bacteria responded to the surface modification with a remarkable change in cellular metabolic activity, as shown by the characteristic cell morphologies, production of extracellular polymeric substances, and an increase in the number of bacterial cells undergoing attachment.     

Comparative evaluation of gene delivery devices in primary cultures of rat hepatic stellate cells and rat myofibroblasts

Background  

The cell surface undergoes continuous change during cell movement. This is characterized by transient protrusion and partial or complete retraction of microspikes, filopodia, and lamellipodia. This requires a dynamic actin cytoskeleton, moesin, components of Rho-mediated signal pathways, rearrangement of membrane constituents and the formation of focal adhesion sites. While the immunofluorescence distribution of endogenous moesin is that of a membrane-bound molecule with marked enhancement in some but not all microextensions, the C-terminal fragment of moesin co-distributes with filamentous actin consistent with its actin-binding activity. By taking advantage of this property we studied the spontaneous protrusive activity of live NIH3T3 cells, expressing a fusion of GFP and the C-terminal domain of moesin.     

Life Cycle-Dependent Cytoskeletal Modifications in Plasmodium falciparum Infected Erythrocytes

Plasmodium falciparum infection of human erythrocytes is known to result in the modification of the host cell cytoskeleton by parasite-coded proteins. However, such modifications and corresponding implications in malaria pathogenesis have not been fully explored. Here, we probed the gradual modification of infected erythrocyte cytoskeleton with advancing stages of infection using atomic force microscopy (AFM). We reported a novel strategy to derive accurate and quantitative information on the knob structures and their connections with the spectrin network by performing AFM–based imaging analysis of the cytoplasmic surface of infected erythrocytes. Significant changes on the red cell cytoskeleton were observed from the expansion of spectrin network mesh size, extension of spectrin tetramers and the decrease of spectrin abundance with advancing stages of infection. The spectrin network appeared to aggregate around knobs but also appeared sparser at non-knob areas as the parasite matured. This dramatic modification of the erythrocyte skeleton during the advancing stage of malaria infection could contribute to the loss of deformability of the infected erythrocyte.     

HuC–eGFP mosaic labelling of neurons in zebrafish enables in vivo live cell imaging of growth cones

The field of axon guidance is taking advantage of the powerful genetic and imaging tools that are now available to visualise growth behaviour in living cells, both in vivo and in real time. We have developed a method to visualise individual neurons within the living zebrafish embryo which provides exceptional cellular resolution of growth cones and their filopodia. We generated a DNA construct in which the HuC promoter drives expression of eGFP. Injection of the plasmid into single cell fertilised zebrafish egg resulted in mosaic expression of eGFP in neurons throughout the developing embryo. By manipulating the concentration of injected plasmid, it was possible to optimise the numbers of neurons that expressed the construct so that individual growth cones could be easily visualised. We then used time-lapse high magnification widefield epifluorescence microscopy to visualise the growth cones as they were exploring their environment. Growth cones both near the surface of the embryo as well as deep within the developing brain of embryos at 20?h post fertilisation were clearly imaged. With time-lapse sequence imaging with intervals between frames as frequent as 1?s there was minimal loss of fluorescence intensity and the dynamic nature of the growth cones became evident. This method therefore provides high magnification, high resolution time-lapse imaging of living neurons in vivo and by use of widefield epifluorescence rather than confocal it is a relatively inexpensive microscopy method.     

Cellular imaging assay for early evaluation of an apoptosis inducer

The objective of this study was to propose a feasibility of a cellular imaging assay as an alternative to the conventional cytotoxicity assay, such as MTS assay, for apoptosis monitoring. As an apoptosis monitoring parameter, affinity interaction between phosphatidylserine (PS) and annexin V was chosen. First, the specific binding affinity between annexin V and PS in phospholipid bilayers consisting of various molar (0–15%) composition of PS was measured using a surface plasmon resonance biosensor. As PS composition increased, the binding level of annexin V increased proportionally. Second, various concentrations (0.1–10 μM) of staurosporine were used as to induce apoptosis and introduced to MCF-7 breast carcinoma cells. The cellular fluorescence images from annexin V-FITC conjugate were obtained by confocal microscopy, and their fluorescence intensities were quantified by image scanning. Dose–apoptosis (or cell death) relationships were very similar to those from MTS and FACS assays. In summary, our cellular imaging method could serve as a quicker and simpler alternative to MTS (end point assay) and FACS (flow cytometry) to screen potential apoptosis inducers.     

Imaging lipid lateral organization in membranes with C-laurdan in a confocal microscope

Lateral organization of biological membranes is frequently studied using fluorescence microscopy. One of the most widely used probes for these studies is 2-dimethylamino-6-lauroylnaphthalene (laurdan). The fluorescence of this probe is sensitive to the environment polarity, and thus laurdan reports the local penetration of water when inserted in membranes. Unfortunately, this probe can only be used under two-photon excitation due to its low photostability. This is a very important limitation, because there are not too many laboratories with capability for two-photon microscopy. In this work, we explored the performance of 6-dodecanoyl-2-[N-methyl-N-(carboxymethyl)amino]naphthalene (C-laurdan), a carboxyl-modified version of laurdan, for imaging biological membranes using a conventional confocal microscopy setup. We acquired generalized polarization (GP) images of C-laurdan inserted in giant unillamelar vesicles composed of binary mixtures of lipids and verified that the probe allows observing the coexistence of different phases. We also tested the performance of the probe for measurement with living cells and registered GP images of melanophore cells labeled with C-laurdan in which we could observe highly ordered regions such as filopodia. These findings show that C-laurdan can be successfully employed for studies of membrane lateral organization using a conventional confocal microscope and can open the possibility of studying a wide variety of membrane-related processes.     

Ultrastructural features of the adult hermaphrodite gonad of Caenorhabditis elegans: relations between the germ line and soma.

Genetic and embryological experiments have established the Caenorhabditis elegans adult hermaphrodite gonad as a paradigm for studying the control of germline development and the role of soma-germline interactions. We describe ultrastructural features relating to essential germline events and the soma-germline interactions upon which they depend, as revealed by electron and fluorescence microscopy. Gap junctions were observed between oocytes and proximal gonadal sheath cells that contract to ovulate the oocyte. These gap junctions must be evanescent since individual oocytes lose contact with sheath cells when they are ovulated. In addition, proximal sheath cells are coupled to each other by gap junctions. Within proximal sheath cells, actin/myosin bundles are anchored to the plasma membrane at plaque-like structures we have termed hemi-adherens junctions, which in turn are closely associated with the gonadal basal lamina. Gap junctions and hemi-adherens junctions are likely to function in the coordinated series of contractions required to ovulate the mature oocyte. Proximal sheath cells are fenestrated with multiple small pores forming conduits from the gonadal basal lamina to the surface of the oocyte, passing through the sheath cell. In most instances where pores occur, extracellular yolk particles penetrate the gonadal basal lamina to directly touch the underlying oocytes. Membrane-bounded yolk granules were generally not found in the sheath cytoplasm by either electron microscopy or fluorescence microscopy. Electron microscopic immunocytochemistry was used to confirm and characterize the appearance of yolk protein in cytoplasmic organelles within the oocyte and in free particles in the pseudocoelom. The primary route of yolk transport apparently proceeds from the intestine into the pseudocoelom, then through sheath pores to the surface of the oocyte, where endocytosis occurs. Scanning electron microscopy was used to directly visualize the distal tip cell which extends tentacle-like processes that directly contact distal germ cells. These distal tip cell processes are likely to play a critical role in promoting germline mitosis. Scanning electron microscopy also revealed thin filopodia extending from the distal sheath cells. Distal sheath filopodia were also visualized using a green fluorescent protein reporter gene fusion and confocal microscopy. Distal sheath filopodia may function to stretch the sheath over the distal arm.     

Localisation of fungal hyphae in wood using immunofluorescence labelling and confocal laser scanning microscopy

This study explored the feasibility of using immunofluorescence labelling in conjunction with confocal laser scanning microscopy (CLSM) for detection of common fungal colonisers of unseasoned radiata pine in New Zealand. Wood sections infected with Ophiostoma piceae were treated with monoclonal antibody IF3 (1), and then Oregon green 514 goat anti-mouse IgG, a fluorescent secondary antibody. Additional wood sections infected with other Ophiostoma spp., Sphaeropsis sapinea, Leptographium procerum, Trichoderma sp. and Phlebiopsis gigantea were treated similarly to determine whether the antibody was specific to O. piceae or was recognising other fungal species. Sections were examined using phase contrast and fluorescence light microscopy prior to CLSM. Immunolabelled fungal hyphae showed relatively weak fluorescence compared to the strong autofluorescence of wood cell walls and extractives. Labelled hyphae of O. piceae were detected in wood using CLSM but not with ordinary fluorescence microscopy. This is because CLSM has stronger illumination power and superior imaging ability compared with ordinary fluorescence microscopy. The monoclonal antibody did not cross-react with the other Ophiostoma species. However, non-specific antibody binding was observed with L. procerum and Trichoderma species. Furthermore, cell walls of L. procerum showed strong autofluorescence with optical properties similar to wood extractives when examined prior to incubation with the monoclonal and secondary antibody, therefore cross-reactivity tests were inconclusive for Leptographium and Trichoderma species. The current investigation demonstrated that CLSM provides possibilities for future investigations on in situ interactions of common radiata pine fungal colonisers, with one another and with wood.     

Three-dimensional reconstruction by confocal laser scanning microscopy in routine pathologic specimens of benign and malignant lesions of the human breast

 Confocal laser scanning microscopy (CLSM) has become an exciting new instrument because of its increased resolution over conventional wide-field microscopy and its high performance three-dimensional (3D) optical sectioning. Although CLSM has been used extensively in cell biology, few applications have been reported in routine clinical pathology. In this study, 3D reconstruction was performed on routine formalin-fixed, paraffin-embedded tissues of normal mammary duct, simple ductal hyperplasia, intraductal papillary hyperplasia, ductal carcinoma in situ, invasive carcinoma, and lymph node metastatic carcinomas of the human breast by using computer-assisted CLSM in conjunction with a 3D reconstruction software package (microVoxel). The selected specimens were sectioned at 30 μm, mounted on glass slides, and stained with the DNA fluorescent probe, YOYO-1 iodide. The nuclear DNA and chromatin texture were clearly demonstrated after pretreatment with RNAase and hydrolysis with 2 N HCl. High quality 3D images were obtained by processing the optical section stacks with volume render and surface display parameters in microVoxel. 3D morphologic characteristics of different breast lesions were examined in various orientations by angular image rotation. The clearly benign lesions (simple ductal hyperplasia and intraductal papillary hyperplasia) revealed similar 3D morphologic features, including: (1) smooth nuclear surface and homogeneous chromatin fluorescence intensity; (2) hyperplastic cell nuclei showing similar shape and volume; and (3) clear-cut margin of basement membrane defined by spindle-shaped myocytes of the ductal outer layer. In contrast, carcinomas displayed remarkably different features in 3D morphology, including: (1) irregular nuclear surface; (2) marked nuclear pleomorphism (irregular, angulated and indented shape of nuclear volume); (3) irregular and coarse chromatin texture; (4) chaotic arrangement of tumor cell nuclei; and (5) absence of myocytes, indicating no clear margin at the site of infiltration of cancer cells. In conclusion, nuclear structure, specifically demonstrated by CLSM of YOYO-1 iodide fluorescently stained cells, used in tandem with 3D volume morphologic reconstruction, may provide a useful research diagnostic tool in pathology. Accepted: 7 November 1996     

Actin cytoskeletal organization in human osteoblasts grown on different dental titanium implant surfaces

The understanding of the cellular basis of osteoblastic cell-biomaterial interaction is crucial to the analysis of the mechanism of osseointegration. Cell adhesion is a complex process that is dependent on the cell types and on the surface microtopography and chemistry of the substrate. We have studied the role of microtopography in modulating cell adhesion, in vitro, using a human osteoblastic cell line for the assessment of actin cytoskeletal organization. Through application of CLSM combining reflection and fluorescence, 2D or 3D images of cytoskeleton were obtained. On smooth surfaces, Ti CP machined, predominantly planar bone cells with an axial ratio of 1.1 were randomly oriented, with stress fibers running in all directions, and thin filopodia. On TiCP Osseotite surfaces the osteoblastic cells conformed to the irregular terrain of the sustrate with focal adhesion sites only established on the relative topographical peaks separated for a longer distance than in the machined surface, and defined wide lamellopodia and long filopodia, with enhanced expression of stress fibers, forming large clear focal contacts with the rough surface. The cytoskeletal organization of cells cultured on rough titanium supports an active role for the biomaterial surface in the events that govern osteoblastic cell adhesion. The results enforce the role of the rough sustrate surface in affecting osteoblastic cell adhesion and provide valuable information for the design of material surfaces that are required for the development of an appropriate osteogenic surface for osteoblastic anchorage, compared to machined surface, in dental implants.     

Isolated rat alveolar type II cells protrude intracellular lamellar bodies by forming bubble-like structures during surfactant secretion

Pulmonary surfactant is synthesized and secreted by pulmonary alveolar type II epithelial cells (type II cells). It passes through the alveolar lining fluid and adsorbs to the air-liquid interface. The process from secretion to adsorption is not yet entirely understood. To acquire a detailed understanding of this process, we used multiple observations of type II cells isolated from rat lungs under electron microscopy (EM) and confocal laser scanning microscopy (CLSM). Transmission EM observation demonstrated a loosening process of the intracellular lamellar bodies from the inside to the outside of the cell. Scanning EM observation revealed bubble-like protrusions from the cell surface, and differential interference contrast microscopy illustrated the protrusions expanding with time. CLSM observation with FM 1–43, a fluorescent membrane probe, revealed that the bubble-like protrusions were composed of phospholipids. Thus, we have demonstrated that isolated rat type II cells protrude intracellular lamellar bodies by forming bubble-like structures, possibly enabling them to adsorb to the air-liquid interface directly. These observations suggest a new mechanism for surfactant secretion from type II cells. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Display of adenoregulin with a novel <Emphasis Type="Italic">Pichia pastoris</Emphasis> cell surface display system

Two Pichia pastoris cell surface display vectors were constructed. The vectors consisted of the flocculation functional domain of Flo 1p with its own secretion signal sequence or the α-factor secretion signal sequence, a polyhistidine (6×His) tag for detection, an enterokinase recognition site, and the insertion sites for target proteins. Adenoregulin (ADR) is a 33-amino-acid antimicrobial peptide isolated from Phyllomedusa bicolor skin. The ADR was expressed and displayed on the Pichia pastoris KM71 cell surface with the system reported. The displayed recombinant ADR fusion protein was detected by fluorescence microscopy and confocal laser scanning microscopy (CLSM). The antimicrobial activity of the recombinant adenoregulin was detected after proteolytic cleavage of the fusion protein on cell surface. The validity of the Pichia pastoris cell surface display vectors was proved by the displayed ADR.     

Physical association of moesin and CD46 as a receptor complex for measles virus.

Recently, two cellular membrane proteins, the membrane cofactor protein CD46 and the membrane-organizing external spike protein, moesin, have been identified to be functionally associated with measles virus (MV) infectivity of cells. We investigated the functional consequences of binding of monoclonal antibodies to both molecules individually and combined on MV attachment, fusion, and plaque formation and the putative direct physical interaction of moesin and CD46. We found that antibodies to moesin or CD46 separately inhibited MV-cell interactions to a high percentage in the plaque test, by approximately 85 and 75%, respectively. The inhibition by combinations of antibodies was additive at low concentrations and complete at high concentrations. This indicates that similar sites of interaction were blocked by steric hindrance. Furthermore, antimoesin antibodies blocked the infection of CD46-negative mouse cell lines with MV. Chemical cross-linking of cell surface proteins indicated the close proximity of CD46 and moesin in the membrane of human cells, and coimmunoprecipitation of moesin with CD46 suggested their physical interaction. Immunohistochemically by electron microscopy, CD46 and moesin were found to be localized at sites of the cellular membrane where MV particles adsorbed. These data support a model of direct interaction of CD46 and moesin in the cellular membrane and suggest that this complex is functionally involved in the uptake of MV into cells.     

Software controlling algorithms for the system performance optimization of confocal laser scanning microscope

The relative slow scanning speed of a galvanometer commonly used in a confocal laser scanning microscopy system can dramatically limit the system performance in scanning speed and image quality, if the data collection is simply synchronized with the galvanometric scanning. Several algorithms for the optimization of the galvanometric CLSM system performance are discussed in this work, with various hardware controlling techniques for the image distortion correction such as pixel delay and interlace line switching; increasing signal-to-noise ratio with data binning; or enhancing the imaging speed with region of interest imaging. Moreover, the pixel number can be effectively increased with Acquire-On-Fly scan, which can be used for the imaging of a large field-of-view with a high resolution.     

Accumulation of FlAsH/Lumio Green in active mitochondria can be reversed by β-mercaptoethanol for specific staining of tetracysteine-tagged proteins

Recent advances in the field of small molecule labels for live cell imaging promise to overcome some of the limitations set by the size of fluorescent proteins. We tested the tetracysteine–biarsenical labeling system in live cell fluorescence microscopy of reggie-1/flotillin-2 in HeLa and N2a cells. In both cell types, the biarsenical staining reagent FlAsH/Lumio Green accumulated in active mitochondria and led to mitochondrial swelling. This is indicative of toxic side effects caused by arsenic, which should be considered when this labeling system is to be used in live cell imaging. Mitochondrial accumulation of FlAsH/Lumio Green was reversed by addition of low concentrations of thiol-containing reagents during labeling and a subsequent high stringency thiol wash. Both ethanedithiol and β-mercaptoethanol proved to be effective. We therefore established a staining protocol using β-mercaptoethanol as thiol binding site competitor resulting in a specific staining of tetracysteine-tagged reggie-1/flotillin-2 of adequate signal to noise ratio, so that the more toxic and inconvenient ethanedithiol could be avoided. Furthermore, we show that staining efficiency was greatly enhanced by introducing a second tetracysteine sequence in tandem.M.F. Langhorst and S. Genisyuerek contributed equally to this work.     

The use of microscopy and three-dimensional visualization to evaluate the structure of microbial biofilms cultivated in the calgary biofilm device

Microbes frequently live within multicellular, solid surface-attached assemblages termed biofilms. These microbial communities have architectural features that contribute to population heterogeneity and consequently to emergent cell functions. Therefore, three-dimensional (3D) features of biofilm structure are important for understanding the physiology and ecology of these microbial systems. This paper details several protocols for scanning electron microscopy and confocal laser scanning microscopy (CLSM) of biofilms grown on polystyrene pegs in the Calgary Biofilm Device (CBD). Furthermore, a procedure is described for image processing of CLSM data stacks using amira™, a virtual reality tool, to create surface and/or volume rendered 3D visualizations of biofilm microorganisms. The combination of microscopy with microbial cultivation in the CBD — an apparatus that was designed for highthroughput susceptibility testing — allows for structure-function analysis of biofilms under multivariate growth and exposure conditions.     

Imaging single virus particles on the surface of cell membranes by high-resolution scanning surface confocal microscopy

We have developed a high-resolution scanning surface confocal microscopy technique capable of imaging single virus-like particles (VLPs) on the surfaces of cells topographically and by fluorescence. The technique combines recently published single-molecule-resolution ion-conductance microscopy that acquires topographical data with confocal microscopy providing simultaneous fluorescent imaging. In our experiments we have demonstrated that the cell membrane exhibits numerous submicrometer-sized surface structures that could be topographically confused with virus particles. However, simultaneous acquisition of confocal images allows the positions of fluorescently tagged particles to be identified. Using this technique, we have, for the first time, visualized single polyoma VLPs adsorbed onto the cell membrane. Observed VLPs had a mean width of 108 ± 16 nm. The particles were randomly distributed across the cell membrane, and no specific interactions were seen with cell membrane structures such as microvilli. These experiments demonstrate the utility of this new microscope for imaging the interactions of nanoparticles with the cell surface to provide novel insights into the earliest interactions of viruses and other nanoparticles such as gene therapy vectors with the cell.