Chitosan microcapsules loaded with either miconazole nitrate or clotrimazole,prepared via emulsion technique

In this paper, a simple and versatile coacervation technique has been developed by using an ultrasound-assisted oil/water emulsion method for the preparation of antifungal agent-loaded microcapsules. Two types of chitosan microcapsules are successfully prepared. The mean particle size of the chitosan/miconazole nitrate microcapsules is 2.6 μm and that of the chitosan/clotrimazole microcapsules is 4.1 μm. The encapsulation efficiency of the chitosan/miconazole nitrate microcapsules (77.58–96.81%) is relatively higher than that of the chitosan/clotrimazole microcapsules (56.66–93.82%). The in vitro drug release performance of the microcapsules shows that the chitosan/miconazole nitrate microcapsules release about 49.5% of the drug while chitosan/clotrimazole microcapsules release more than 66.1% of the drug after 12 h under a pressure of 5 kg at pH 5.5, which is similar to the pH of human skin. The prepared drug-loaded microcapsules could be applied onto bandages or socks, and will continuously release antifungal drugs in a controlled manner under pressure.     

Hyaluronic acid interaction with chitosan-conjugated magnetite particles and its purification

The polyelectrolyte complex (PEC) effect between hyaluronic acid (HA) and chitosan was explored to recover HA from fermentation broth. Chitosan was conjugated with the magnetic nanoparticles by co-precipitation method to facilitate its recovery. The magnetic chitosan particles (chitosan–magnetite) have an average size about 5 μm and point of zero charge (PZC) around 6.5. pH lower than PZC favored the HA capture. About 39 mg of HA was captured per gram of particles at pH 6. Nearly quantitative release of captured HA was achieved at pH 8. Although HA could not be directly isolated from Streptococcus zoopedemics fermentation broth by manipulating pH between 6 and 8, HA free of contaminant protein could be purified from the crude ethanol precipitate using chitosan–magnetite.     

Particle retention in suspension-feeding fish after removal of filtration structures

The suspension-feeding cichlids Oreochromis aureus (blue tilapia) and Oreochromis esculentus (ngege tilapia) are able to selectively retain small food particles. The gill rakers and microbranchiospines of these species have been assumed to function as filters. However, surgical removal of these oral structures, which also removed associated mucus, did not significantly affect the total number of 11–200 μm particles ingested by the fish. This result supports the hypothesis that the branchial arch surfaces themselves play an important role in crossflow filtration. Both species selectively retained microspheres greater than 50 μm with gill rakers and microbranchiospines intact as well as removed, demonstrating that neither these structures nor mucus are necessary for size selectivity to occur during biological crossflow filtration. After removal of the gill rakers and microbranchiospines, O. esculentus retained significantly more microspheres 51–70 μm in diameter and fewer 91–130 μm microspheres compared to retention with intact structures, but the particle size selectivity of O. aureus was not affected significantly. These results support conclusions from previous computational fluid dynamics simulations indicating that particle size can have marked effects on particle trajectory and retention inside the fish oropharyngeal cavity during crossflow filtration. The substantial inter-individual variability in particle retention by suspension-feeding fish is an unexplored area of research with the potential to increase our understanding of the factors influencing particle retention during biological filtration.     

Recycling wasted biomaterial,crab shells,as an adsorbent for the removal of high concentration of phosphate

In this study, crab shells were recycled as an adsorbent for the removal of phosphate. The effects of shell particle size, temperature, pH and phosphate concentration on phosphate removal were investigated. Shell particles less than 1000 μm in diameter removed more than 85% of 500 mg/L phosphate in 24 h while particles 3350 μm in diameter exhibited only 50% removal efficiency. Temperature showed negligible effect on phosphate removal in the range of 15–45 °C. Although removal efficiency was highest at pH 2.0, the efficiency remained 50–60% at pH of 4.0–10.0. The maximum removal capacity was calculated as 108.9 mg/g through Langmuir isotherm plotting, which was 17.0 and 4.7 times higher than those of coal fly ash and scallop shells, respectively. Although calcium carbonate played an active role in the removal of phosphate, both proteins composing 12.5% of crab shells and cellulose-like backbone of the crab shells also played an important role in phosphate removal.     

Efficacy of Iranian diatomaceous earth deposits against Tribolium confusum Jacquelin du Val (Coleoptera: Tenebrionidae)

Laboratory bioassays were carried out to evaluate the insecticidal efficacy of two Iranian deposits of diatomaceous earths (DEs) and a commercial formulation, SilicoSec®, against adult confused flour beetle (Tribolium confusum Jacquelin du Val). The Iranian DEs were dried and sieved to get particle sizes of 0–149, 74–149, 0–74 μm, and 0–37 μm. First, DE samples were applied at the four concentration levels of 500, 1000, 1500 and 2000 ppm and each concentration was replicated four times. Tests were carried out at 27 ± 1 °C and 55 ± 5% r.h. in continuous darkness. The beetle mortality was counted at 2, 7, and 14 days after exposure. Moreover, another experiment was conducted to estimate the LC₅₀ values of the DEs. For the first experiment, adult beetle mortality exceeded 51% when exposed for 2 d to 2000 ppm of SilicoSec®. Complete mortality was recorded at each concentration of SilicoSec® at an exposure longer than 7 days except for 500 ppm; while mortalities of T. confusum at 2000 ppm of Maragheh and Mamaghan samples with the 0–149 μm particle size were 40.62% and 85.41%, respectively. Mortality of T. confusum was influenced by concentration and time of exposure to the DEs. SilicoSec® was the most effective DE followed by Mamaghan samples. The Maragheh samples were the least effective. In addition, in most cases fractions with smaller particles were more effective than larger ones. More experiments are necessary to process natural DEs and make them commercially exploitable.     

Automated metal-free multiple-column nanoLC for improved phosphopeptide analysis sensitivity and throughput

We report on the development and characterization of automated metal-free multiple-column nanoLC instrumentation for sensitive and high-throughput analysis of phosphopeptides with mass spectrometry. The system employs a multiple-column capillary LC fluidic design developed for high-throughput analysis of peptides (Anal. Chem. 2001, 73, 3011–3021), incorporating modifications to achieve broad and sensitive analysis of phosphopeptides. The integrated nanoLC columns (50 μm i.d. × 30 cm containing 5 μm C18 particles) and the on-line solid phase extraction columns (150 μm i.d. × 4 cm containing 5 μm C18 particles) were connected to automatic switching valves with non-metal chromatographic accessories, and other modifications to avoid the exposure of the analyte to any metal surfaces during handling, separation, and electrospray ionization. The nanoLC developed provided a separation peak capacity of ～250 for phosphopeptides (and ～400 for normal peptides). A detection limit of 0.4 fmol was obtained when a linear ion trap tandem mass spectrometer (Finnegan LTQ) was coupled to a 50-μm i.d. column of the nanoLC. The separation power and sensitivity provided by the nanoLC–LTQ enabled identification of ～4600 phosphopeptide candidates from ～60 μg COS-7 cell tryptic digest followed by IMAC enrichment and ～520 tyrosine phosphopeptides from ～2 mg of human T cells digests followed by phosphotyrosine peptide immunoprecipitation.     

Nutritional effects of culture media on mycoplasma cell size and removal by filtration

Careful media filtration prior to use is an important part of a mycoplasma contamination prevention program. This study was conducted to increase our knowledge of factors that influence efficient filtration of mycoplasma. The cell size of Acholeplasma laidlawii was measured after culture in various nutritional conditions using scanning electron microscopy. The maximum cell size changed, but the minimum cell size remained virtually unchanged and all tested nutritional conditions resulted in a population of cells smaller than 0.2 μm. Culture in Tryptic Soy Broth (TSB) resulted in an apparent increase in the percentage of very small cells which was not reflected in increased penetration of non-retentive 0.2 μm rated filters. A. laidlawii cultured in selected media formulations was used to challenge 0.2 μm rated filters using mycoplasma broth base as the carrier fluid. We used 0.2 μm rated filters as an analytical tool because A. laidlawii is known to penetrate 0.2 μm filters and the degrees of penetration can be compared. Culture of A. laidlawii in TSB resulted in cells that did not penetrate 0.2 μm rated filters to the same degree as cells cultured in other media such as mycoplasma broth or in TSB supplemented with 10% horse serum.     

Effects of vitreousness and particle size of maize grain on ruminal and intestinal in sacco degradation of dry matter,starch and nitrogen

We assessed the effects of vitreousness and particle size of maize grain on ruminal and intestinal in sacco degradation of dry matter, starch and nitrogen. Six maize grain (Zea mays) genotypes characterized by differing vitreousness (proportion of vitreous in total endosperm) were ground (3-mm screen; Gr, ground particles, mean particle size (MPS): 526 μm) and cracked with a roller mill using two gap width settings (CS, cracked small particles, MPS: 1360 μm; CL, cracked large particles, MPS: 2380 μm). The ruminal and intestinal in sacco degradation of dry matter, starch and nitrogen was measured on three dry Holstein cows, fitted with rumen, proximal duodenum and terminal ileum cannulas, fed maize silage ad libitum twice daily. The ruminal starch degradability and intestinal digestibility differed among genotypes (P<0.001) and decreased as particle size increased (P<0.001). For the same particle size, starch ruminal degradability decreased (P<0.05) and intestinal digestibility decreased (P<0.002) with vitreousness. Particle size and vitreousness of maize grain are efficient factors for manipulating the amount of starch escaping rumen degradation, but may be limiting for the amount of starch digested in the small intestine.     

Turbulent-flow chromatography coupled on-line to fast high-performance liquid chromatography and mass spectrometry for simultaneous determination of verticine,verticinone and isoverticine in rat plasma

A method based on the on-line turbulent-flow chromatography and fast high-performance liquid chromatography/mass spectrometry (TFC–LC/MS) was developed for sensitive and high throughput pharmacokinetic study of traditional Chinese medicines (TCMs). In this method, an on-line extraction column (Waters Oasis HLB) and a fast HPLC column with sub-2 μm particle size (Agilent Zorbax StableBond-C₁₈, 4.6 mm × 50 mm, 1.8 μm) in a column-switching set-up were utilized. HLB is a reversed-phase extraction column with hydrophilic–lipophilic balanced copolymer (2.1 mm × 20 mm, 25 μm particle size), which will exhibit some turbulent-flow properties at a high-flow rate. The method combines the speed and robustness of turbulent-flow extraction and the sensitivity and separation efficiency of fast HPLC–MS to analyze multiple and trace constituents of TCMs in plasma matrix. This method was successfully applied for pharmacokinetic study of verticine, verticinone and isoverticine, the chemical markers of Fritillaria thunbergii, after oral administration of total steroidal alkaloids extract of F. thunbergii to rats. Each plasma sample was analyzed within 7 min. The method demonstrated good linearity (R > 0.999) ranged from 0.505 to 96.0 ng/mL with satisfactory accuracy and precision, and the lower limit of quantifications of verticine, verticinone and isoverticine were estimated to be 0.120, 0.595 and 0.505 ng/mL, respectively. These results indicate that the proposed method is fast, sensitive, and feasible for pharmacokinetic study of TCMs.     

Changes in the size distribution of goat steroidogenic luteal cells during pregnancy

Experiments were conducted to investigate the size distribution of goat steroidogenic luteal cells throughout pregnancy. Corpora lutea were collected from very early (<6 weeks), early (6–8 weeks), middle (9–14 weeks) or late (15–18 weeks) stages of pregnancy. Luteal tissue was dissociated into single-cell suspension by enzyme treatments. Cells were stained for 3β-hydroxysteroid dehydrogenase (3β-HSD) activity, a marker for steroidogenic cells. The steroidogenic cells covered a wide spectrum of size ranging from 5 to 45 μm in diameter. There was a significant increase in mean cell diameter (P>0.01) as pregnancy progressed. Mean diameter of 3β-HSD positive cells increased from 14.73±0.35 μm in the corpus luteum of very early pregnancy to 24.20±0.45 μm in the corpus luteum of late pregnancy. The ratio of large (>20 μm in diameter) to small (5–20 μm in diameter) luteal cells was 0.28:1.0 in very early pregnancy, with the 7.5–15 μm cell size class being dominant. However, the ratio of large-to-small luteal cells was increased to 1.77:1.0 μm as pregnancy advanced and 25–35 μm cell sizes became predominant. It is likely that small luteal cells could develop into large cells as pregnancy progresses. Development of pregnancy is also associated with an increase in size of steroidogenic luteal cells.     

Characterization and evaluation of hydrophobically modified chitosan scaffolds: Towards design of enzyme immobilized flow-through electrodes

Chitosan scaffolds were fabricated by application of thermally induced phase separation from aqueous solutions of unmodified chitosan and hydrophobically modified chitosan polymer. The final pore structure, in terms of diameter and geometry, were correlated to freezing temperature and freezing time for both the unmodified and hydrophobically modified chitosan polymer. Results showed that the resulting pore structure is strongly dependent upon the freezing temperature and less dependant upon the freezing time. For scaffolds produced from unmodified chitosan, the pore size decreased as expected with decreasing freezing temperature from ?5 °C to ?10 °C. However, an inconsistency in this trend was observed as the freezing temperature was decreased to ?20 °C. Combined analysis of pore size distribution and average pore diameter suggested that the freezing process was mainly mass transfer dominated at ?5 °C and ?10 °C, but principally heat transfer dominated at ?20 °C. In comparison, the scaffolds produced from hydrophobically modified chitosan (butyl-chitosan) followed the expected trend of decreasing mean pore diameter with decreased freezing temperatures throughout the entire temperature range. The scaffolds produced from the unmodified chitosan were more stable and rigid, and possessed average pore diameters that were generally smaller than those fabricated from the hydrophobically modified chitosan. The generally larger pores in the butyl-modified chitosan scaffolds might be explained by increased phase separation rates due to the introduced hydrophobicity of the chitosan polymer. Among the scaffolds fabricated from the butyl-modified chitosan, those produced at ?20 °C yielded the most uniform pore structure, the smallest average pore diameters, and the least temporal broadening of pore size distribution.     

Rapid harvesting of freshwater microalgae using chitosan

In this study, chitosan was used as a flocculant to harvest freshwater microalgae Chlorella vulgaris. The recovery efficiency of C. vulgaris was tested at various chitosan concentrations. 120 mg/L of chitosan showed the highest efficiency (92 ± 0.4%) within 3 min. The maximum concentration factor of 10 was also achieved at this dose of chitosan. The harvesting efficiency was pH dependent. pH 6.0 showed the highest harvesting efficiency (99 ± 0.5%). Measurement of zeta-potential confirmed that the flocculation was induced by charge neutralization. This study showed that a biopolymer, chitosan, can be a promising flocculant due to its high efficacy, low dose requirements, and short settling time.     

Polydimethylsiloxane modified chitosan. Part III: Preparation and characterization of hybrid membranes

The paper deals with the synthesis of organic–inorganic hybrid membranes, Hy, obtained by simultaneous grafting and crosslinking of chitosan with epoxy-terminated polydimethylsiloxane and γ-glycidoxypropyltrimethoxysilane. Porous membranes, HyP, were also obtained by acid decomposition, at different temperatures (25 and 50 °C), of calcium carbonate porogenic agent trapped inside the material. As proved by electron and atomic force microscopy, the non-porous membrane is a phase segregated material with spherical domains (10–40 μm) of silica core covered by hydrophobic siloxane in a hydrophilic chitosan matrix. The porous membranes showed different morphologies with irregular circular pores of 10–30 μm diameters for the membranes obtained at lower temperature, while the membranes prepared at 50 °C tend to adopt a plan-parallel porosity. The water contact angles of hybrid membranes (78°) and pure chitosan membranes (72°) indicated a lower hydrophilic character of modified chitosan. As a result of the crosslinking and of increased hydrophobicity, the hybrid membranes were characterized by a smaller water swelling degree (about 30%) as compared to pure chitosan membrane (700%). However, the presence of the pores in HyP membranes determined an increase of the water adsorption (maximum swelling degree, about 100%). The hybrid membranes possess a slightly higher thermal stability as compared to chitosan (first initial decomposition temperature, 147 and 175 °C for chitosan and hybrid membranes, respectively), but a lower one as compared to pure polydimethylsiloxane. The high storage modulus of chitosan (about 5.1 × 10⁹ Pa at 20 °C) is decreased by about one order of magnitude by the introduction of the highly flexible polysiloxane and the hybrid membranes are more flexible.     

Characterization of lactase-conjugated magnetic nanoparticles

Conjugation of lactase to magnetic nanoparticles is of interest in biosensor and ingredient processing applications that require high enzyme concentration and catalyst separation from the reaction stream. However, little is known about the effects of these materials on the physicochemical attributes of conjugated lactase. Lactase (Aspergillus oryzae) was covalently attached by carbodiimide chemistry to carboxylic-acid functionalized magnetic particles having a hydrodynamic radius of 18 nm. The resulting enzyme–nanoparticle conjugates were characterized with regard to particle size, zeta potential, enzyme kinetics, temperature and pH stability, catalyst recovery, and secondary structure changes. Following attachment, the materials retained colloidal stability and individual particle characteristics with a zeta potential of ?33 mV compared to ?46 mV for the native particle. The conjugated enzyme showed no changes in secondary structure and exhibited significant catalytic activity with a catalytic efficiency of 2.8 × 10³ M^?1 s^?1 compared to 2.5 × 10³ M^?1 s^?1 for the native enzyme. Relative to the free enzyme, the conjugated enzyme was recovered for repeated use with 78% activity retained after five cycles. This work demonstrates that carboxylic-acid functionalized magnetic nanoparticles can be utilized as a means of producing a simple and effective conjugated-lactase system that achieves both particle and enzyme stability.     

Preparation and pharmacodynamics of low-molecular-weight chitosan nanoparticles containing insulin

Low-molecular-weight chitosan (LMWC) was obtained by enzymatic degradation and ultrafiltration separation. LMWC nanoparticles with LMWC having 20 kDa weight average molecular weight (M_w) were then prepared by solvent evaporation method. The resultant nanoparticles were spherical with a narrow particle size distribution. LMWC nanoparticles loaded with insulin as a model drug were prepared. The average entrapment efficiency of insulin could reach up to 95.54%. The in vitro drug release profiles from the nanoparticles showed an initial burst of release in the first 2 h, followed by zero order release kinetics. In vivo pharmacodynamics of chitosan nanoparticles containing insulin showed that the nanoparticles showed some hypoglycemic activity. Compared with an insulin solution, a relative bioavailability of 0.737 was observed for four times the dosage of insulin in the chitosan nanoparticles after pulmonary administration.     

Evaluation of techniques to detach particle-associated microorganisms from rumen contents

Effects of the most commonly used treatments to detach particle-associated microorganisms from rumen contents were investigated using rumen particles of different sizes. Particles were obtained before feeding from ruminally cannulated sheep. The extent of microorganism dissociation was determined using ¹⁵N as an external marker. The first experiment studied the effect of anaerobiosis on efficiency of 1 g/l methylcellulose, pH 8, and chilling (4 °C). Due to poor detachment, the anaerobic procedure was discarded. The following factors, separately or in combination, were then examined in aerobic conditions on two classes of particles obtained from whole ruminal contents (large: >400 μm; small: 100–400 μm) being: (a) stomacher pummelling (5 min); (b) Waring blender homogenisation (3×1 min); (c) chilling (4 °C); (d) pH 8; (e) 1 g/l methylcellulose; (f) 10 ml/l methanol and 10 ml/l tertiary butanol. Samples were incubated for 5 h, except for treatments (a) and (b), and washed after treatment for 2 min under running tap water in a 25 μm gauze. Blending proved to be the most effective treatment (from 50 to 57% removal). Combinations of treatments did not improve detachment. N losses from treated samples were linearly related to ¹⁵N removal. The percentage of particles removed was calculated using incubated and/or washed particles as the control, according to treatments. Results suggest that caution is needed when evaluating the effectiveness of treatments, because results are dependent on the type of particles chosen as the control.     

Sexual and vegetative phases in the planktonic diatom Pseudo-nitzschia multistriata

The planktonic diatom Pseudo-nitzschia multistriata (Takano) Takano is known to produce the toxin domoic acid and it is recorded during late summer and autumn in the Gulf of Naples (Tyrrhenian Sea, Italy). We describe the sexual cycle of this species and report information on the variability of growth and cell size reduction rates at different experimental conditions. We induced sexual reproduction by crossing monoclonal cultures of opposite mating type. P. multistriata has a heterothallic life cycle that follows the general pattern reported for other congeneric species. Sexual stages were detected in cultures with an average apical length between 55 and 39 μm. The size of the initial cells produced at the end of the sexual phase was comprised between 72 and 82 μm and the lower cell size detected in culture was 26 μm. Sexual reproduction was thus recorded within a size window corresponding to 39–71% of the maximum cell apical length. Both growth performances and cell size reduction rates depend on cell size. The largest cells showed slower growth rates and larger size reduction rates at each division, while the relationship was opposite for cells smaller then 60% of the maximum size.     

Morphological characteristics of phytoliths from representative conifers in China

Coniferous phytoliths in sediments are an effective tool for detecting the historical appearance of conifers. However, at the timberline in mountainous areas, such coniferous phytoliths are easily confused with grass phytoliths. This study analyses modern phytoliths from 17 conifer plants. Six common types and six rare types were identified. The conifers studied produce abundant blocky polyhedral and cubic (in the average 30–40 μm size range), blocky scrobiculate (average 30–40 μm), tabular elongate unsculpted (length 50–100 μm, width 10–20 μm), tabular elongate cavate (length 50–150 μm, width ∼10 μm), tabular elongate dendritic (50–100 μm × 10–20 μm), and irregular oblong (20–40 μm) phytoliths. This paper aims to show morphological characteristics of coniferous phytoliths in China, and to show how the common coniferous phytoliths differ from similar grass phytolith types, such as blocky polyhedral coniferous phytoliths from silicified parallelepipedal bulliform cells produced by grass. Blocky polyhedral and cubic phytoliths are the commonest coniferous phytoliths found in the sediments, but need to be carefully distinguished from grass parallelepipedal bulliform cells. This study indicates that clearly protruding ridges and irregular inward edges are essential features of cubic and polyhedral morphotypes produced by conifers. Results of this paper might provide important material for the study of paleovegetation and paleoecology of mountainous areas, especially at the timberline.     

Suitable sediment fraction for paleoenvironmental reconstruction and assessment of contaminated coastal areas based on benthic foraminifera: A case study from Augusta Harbour (Eastern Sicily,Italy)

Since the 1990s several studies noticed that, along coastal marine areas, the mean size of benthic foraminifera may be reduced due to heavy metal pollution, even if no biometric studies were carried out to quantify this aspect. The Augusta harbour (Sicily, Italy), is characterized by a strong contamination due to several anthropogenic activities, the most important of which are a petrochemical pole and an important industrial harbour. Taking into account the previous studies carried out in the area, which recorded small-sized foraminifera, the present study compared assemblage composition and faunal parameters in the >125 μm and >63 μm fractions of a sediment core collected in the most polluted sector of Augusta harbour. The aim was to understand if the two fractions have comparable environmental significance providing reliable information on the environmental status. In order to quantify the amount of smaller foraminifera in a community and to determine species loss between size fractions, two new indices are used: the Foraminiferal Size Index (FSI) and the Lost Species Index (LSI). Species richness, diversity and composition of the two assemblages were determined to characterize their structure. The results highlighted great depletion and different composition of the >125 μm assemblage with respect to the >63 μm one, showing a selective loss of particular ecological groups (stress-tolerant infaunal taxa). Also the better correlation of Foraminiferal Number (FN) and H’ index of >63 μm fraction with Polychlorobiphenyls (PCBs), Polycyclic Aromatic Hydrocarbons (PAHs), Barium (Ba) and Mercury (Hg), demonstrated the higher reliability of this size fraction for environmental assessment purposes.     

Separation and determination of Se-compounds by liquid chromatography coupled with electrospray mass spectrometry

A method for Selenocystine and Selenomethionine determination by LC–ES–MS was developed in this work. The mass spectrometer was used in a positive mode and the m/z used for the identification of Selenomethionine and Selenocystine were 198.35 and 337.15, respectively.The selenium species were separated using a LC system. A silica chromatographic column (ZORBAX Eclipse XDB-C₈ of 50 mm length and 2.1 mm internal diameter (particle size 3.5 μm)) was used. The separation was realised in isocratic mode, using methanol:water (1:1) with 1% of acetic acid and a flow rate of 200 μL min⁻¹. The developed method was precise (RSD of 4.5% and 3.9% for Selenomethionine and Selenocystine, respectively) and sensible (limit of detection (LOD) 0.06 and 0.99 mg L⁻¹ for selenomethionine and selenocystine, respectively).