Effects of Surfactants on the Improvement of Sludge Dewaterability Using Cationic Flocculants

The effects of the cationic surfactant (cationic cetyl trimethyl ammonium bromide, CTAB) on the improvement of the sludge dewaterability using the cationic flocculant (cationic polyacrylamide, CPAM) were analyzed. Residual turbidity of supernatant, dry solid (DS) content, extracellular polymeric substances (EPS), specific resistance to filtration (SRF), zeta potential, floc size, and settling rate were investigated, respectively. The result showed that the CTAB positively affected the sludge conditioning and dewatering. Compared to not using surfactant, the DS and the settling rate increased by 8%–21.2% and 9.2%–15.1%, respectively, at 40 mg·L⁻¹ CPAM, 10×10⁻³ mg·L⁻¹ CTAB, and pH 3. The residual turbidities of the supernatant and SRF were reduced by 14.6%–31.1% and 6.9%–7.8% compared with turbidities and SRF without surfactant. Furthermore, the release of sludge EPS, the increases in size of the sludge flocs, and the sludge settling rate were found to be the main reasons for the CTAB improvement of sludge dewatering performance.     

Binding of cationic surfactants to DNA, protein and DNA-protein mixtures

Extent of binding (gamma 2(1)) of cationic surfactants cetyltrimethyl ammonium bromide (CTAB), myristyltrimethyl ammonium bromide (MTAB) and dodecyl trimethyl ammonium bromide (DTAB) to calf-thymus DNA, bovine serum albumin (BSA) and to their binary mixture respectively have been measured as function of bulk concentration of the surfactant by using equilibrium dialysis technique. Binding of CTAB has been studied at different pH, ionic strength (mu), temperature and biopolymer composition and with native and denatured states of the biopolymers. The chain-length of different long chain amines plays a significant role in the extent of binding under identical solution condition. The binding ratios for CTAB to collagen, gelatin, DNA-collagen and DNA-gelatin mixtures respectively have also been determined. The conformational structures of different biopolymers are observed to play significant role in macromolecular interactions between protein and DNA in the presence of CTAB. From the experimental values of the maximum binding ratio (gamma 2m) at the saturation level for each individual biopolymer, ideal values (gamma 2m)id have been theoretically calculated for binary mixtures of biopolymers using additivity rule. The protein-DNA-CTAB interaction in mixture has been explained in terms of the deviation (delta) of (gamma 2m) from (gamma 2m)id in the presence of a surfactant in bulk. The binding of surfactants to biopolymers and to their binary mixtures are compared more precisely in terms of the Gibbs' free energy decrease (-delta G degree) for the saturation of the binding sites in the biopolymers or biopolymer mixtures with the change of the bulk surfactant activity from zero to unity in the rational mole fraction scale.     

Hydrophobic tail length plays a pivotal role in amyloid beta (25–35) fibril–surfactant interactions

The amyloid β‐peptide fragment comprising residues 25–35 (Aβ_25‐35) is known to be the most toxic fragment of the full length Aβ peptide which undergoes fibrillation very rapidly. In the present work, we have investigated the effects of the micellar environment (cationic, anionic, and nonionic) on preformed Aβ_25‐35 fibrils. The amyloid fibrils have been prepared and characterized by several biophysical and microscopic techniques. Effects of cationic dodecyl trimethyl ammonium bromide (DTAB), cetyl trimethylammonium bromide (CTAB), anionic sodium dodecyl sulfate (SDS), and nonionic polyoxyethyleneoctyl phenyl ether (Triton X‐100 or TX) on fibrils have been studied by Thioflavin T fluorescence, UV–vis spectroscopy based turbidity assay and microscopic analyses. Interestingly, DTAB and SDS micelles were observed to disintegrate prepared fibrils to some extent irrespective of their charges. CTAB micelles were found to break down the fibrillar assembly to a greater extent. On the other hand, the nonionic surfactant TX was found to trigger the fibrillation process. The presence of a longer hydrophobic tail in case of CTAB is assumed to be a reason for its higher fibril disaggregating efficacy, the premise of their formation being largely attributed to hydrophobic interactions. Proteins 2016; 84:1213–1223. © 2016 Wiley Periodicals, Inc.     

Studies on heme release from normal and metal ion reconstituted hemoglobin mediated through ionic surfactant

The interaction of metal-substituted hemoglobin (MHb), where M = Ni and Cu (T-state with no O2 and CO binding capability) and Fe (R-state when CO is bound), with cationic cityl trimethyl ammonium bromide (CTAB) and anionic (sodium dodecyl sulfate-SDS) surfactants has been studied using spectroscopic techniques-UV-visible, electron paramagnetic resonance (EPR), and Fourier transform-Raman-with additional supportive evidence coming from conductivity measurements. We observed the loss of 5-coordination in all three hemoglobins below the critical micelle concentration (CMC) of surfactant, with noticeable differences, suggesting differing mechanisms involved in this process. In addition, above the CMC, Ni- and Cu-hemes were found to leave their proteins more easily than Fe-heme, presumably due to weaker or no bond with the proximal histidine in the former. The released heme is stabilized by micellar media through a hydrophobic interaction process. Of the two surfactants, CTAB seems to be capable of releasing the heme better than SDS and it is attributed to the greater hydrophobicity of CTAB though the charge of the surfactant plays an important role.     

Spontaneous formation of DPPC monolayers at aqueous/vapor interfaces and the impact of charged surfactants

Surface tensiometry and vibrational sum-frequency spectroscopy were used to examine the structure and organization in phospholipid monolayers at the aqueous/vapor interface in the absence and in the presence of simple, charged surfactants. 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) was the phospholipid employed in these studies and surfactants included sodium dodecyl sulfate (SDS) and dodecyl trimethyl ammonium bromide (DTAB). DPPC spontaneously spreads on a pure water (pH = 5.5) surface to form monolayers as evidenced by an equilibrium spreading pressure (ESP) of 7.9 ± 2.3 mN/m and a clearly resolved vibrational spectrum. Low concentrations of surfactants inhibit the spreading of DPPC and result in significantly lower ESP values. Anionic and cationic surfactants at higher concentrations have opposite effects on monolayer organization; SDS creates well-organized monolayers while DTAB leads to poor organization of lipid molecules. Surface-specific vibrational spectra showed that high concentrations of charged surfactants (≥ 100 µM) lead to accumulation of net surface charges as evidenced by destructive and constructive interferences. Selectively deuterating surfactants results in changes in vibrational band intensities and phases enabling assignment of relative orientations of equivalent functional groups belonging to the lipid and surfactant.     

Effect of various surfactants (cationic,anionic and non-ionic) on the growth of <Emphasis Type="Italic">Aspergillus parasiticus</Emphasis> (NRRL 2999) in relation to aflatoxin production

The effect of surfactants (two cationic, one anionic and three non-ionic) at 0.001, 0.01, 0.1 and 1.0 % concentrations on aflatoxin production, ergosterol content and sugar consumption by Aspergillus parasiticus (NRRL 2999) in YES liquid culture medium is reported. At 0.01% concentration, the cationic surfactants, cetyl dimethyl ammonium bromide (CDAB) and dodecyl trimethyl ammonium bromide (DTAB), and the anionic surfactant, sodium dodecyl sulfate (SDS), completely inhibited spore germination, while DTAB also inhibited the production of ergosterol and toxin (p < 0.05). At a concentration of 0.001%, CDAB was found to enhance toxin production, while SDS was found to inhibit it when compared with other surfactants. Non-ionic surfactants, polyoxyethylene sorbitan monolaurate (Tween-20), polyoxyethylene lauryl ether (Brij-35) and ethoxylated p-tert-octylphenol (Triton X-100) delayed the spore germination up to day 5 at all concentrations and inhibited toxin and ergosterol production at 0.001% concentration. The affect was found to be dose-dependent from 0.001% to 1%, for Triton X-100 only. Positive correlation between ergosterol content and toxin production in the presence of different surfactants at various time periods (3, 5, 7, 9 and 12 days) was found. Tween-20 was most effective in inhibiting toxin production on day 7, when aflatoxin production was found to be maximal in control group. Sugar consumption was directly proportional to the ergosterol content, showing a significant correlation with aflatoxin production.     

Enhanced adsorption of congo red from aqueous solutions by chitosan hydrogel beads impregnated with cetyl trimethyl ammonium bromide

The adsorption of congo red (CR) onto chitosan (CS) beads impregnated by a cationic surfactant (CTAB, cetyl trimethyl ammonium bromide) was investigated. Chitosan beads impregnated at a ratio of 1/20 of CTAB to CS (0.05% of CTAB and 1% of CS) increased the CR adsorption capacity by 2.2 times from 162.3 mg/g (0% CTAB) to 352.5 mg/g (0.05% CTAB). The CR adsorption decreased with an increase in pH of the CR solution from 4.0 to 9.0. The Sips isotherm model showed a good fit with the equilibrium experimental data and the values of the heterogeneity factor (n) indicated heterogeneous adsorption of CR onto CS/CTAB beads, as well as CS beads. The kinetic data showed better fit to the pseudo second-order rate model than to the pseudo first-order rate model. The impregnation of CS beads by cationic surfactants showed the highest adsorption capacities of CR compared to any other adsorbents and would be a good method to increase adsorption efficiency for the removal of anionic dyes in a wastewater treatment process.     

The effect of beta-tubulin-specific antisense oligonucleotide encapsulated in different cationic liposomes on the suppression [correction of supression] of intracellular L. donovani parasites in vitro

An antisense oligonucleotide (20 mer) targeted to the parasite beta-tubulin gene and encapsulated in cationic liposomes, was used to test its antileishmanial activity in vitro. Cationic liposomes containing dioleyl trimethyl ammonium propane (DOTAP) were found to have higher antileishmanial activity (88% at 4 microM oligonucleotide) compared to two other liposomes with stearyl amine (SA) and cetyl trimethyl ammonium bromide (CTAB) as cations. Dot-blot experiments were performed to analyse the expression of beta-tubulin mRNA using beta-tubulin-specific radiolabelled DNA as a probe. When compared with their respective controls, beta-tubulin-specific gene expression was found to be diminished by treatment with a specific antisense oligonucleotide encapsulated in cationic liposomes (CTAB:DOPE) in a concentration-dependent manner. These experiments show that antisense oligonucleotides targeted to the beta-tubulin gene of Leishmania donovani inhibit beta-tubulin synthesis leading to the arrest of multiplication of intracellular parasites.     

Surfactant-induced lipid peroxidation in a tropical euryhaline teleost Oreochromis mossambicus (Tilapia) adapted to fresh water

Exposure to anionic (sodium dodecyl sulfate, SDS), cationic (cetyl trimethyl ammonium bromide CTAB) and non ionic (Triton X-100) surfactants at a sub lethal concentration of 1 ppm resulted in severe oxidative stress in the hepatic, renal and cardiac tissues of fresh water adapted Oreochromis mossambicus. Hepatic catalase showed significant increase (P<0.001) in all the surfactant exposed fish, but the renal enzyme was significantly increased only in CTAB dosed fish (P<0.001) and the cardiac enzyme showed significant increase in Triton (P<0.05) and CTAB dosed fish (P<0.001). SOD levels were significantly increased (P<0.001) in hepatic, renal and cardiac tissues of all the surfactant-treated fish. Glutathione reductase also was significantly increased (P<0.001) in the hepatic and renal tissues of surfactant dosed fish except cardiac tissues of CTAB exposed animals. Glutathione levels in the tissues studied were significantly higher in the surfactant treated animals (P<0.001) whereas malondialdehyde levels were significantly elevated only in the hepatic tissues of animals exposed to Triton (P<0.001). The surfactants based on their charge, antioxidant profile and in vivo metabolism may be arranged in the order of decreasing toxicity as CTAB > Triton > SDS. Thus it may be inferred from the present study that the antioxidant defenses and the in vivo metabolism of the surfactants are key factors in deciding the surfactant toxicity.     

Effect of surfactants on stability of Acinetobacter johnsonii S35 and Oligotropha carboxidovorans S23 coaggregates

The effect of anionic (sodium dodecyl sulphate or SDS) and cationic (cetyltrimethylammonium bromide or CTAB) surfactants on the stability of binary bacterial coaggregates comprising Acinetobacter johnsonii S35 and Oligotropha carboxidovorans S23 (both sewage sludge isolates) was studied and compared with that on the complex sewage sludge flocs. Both SDS and CTAB enhanced the bacterial coaggregation at their lower concentrations of 0.2 and 0.07 mg ml(-1), respectively. However, complete deflocculation of coaggregates was observed at 1 mg ml(-1) SDS and 0.3 mg l(-1) CTAB concentrations. Further, sewage sludge flocs did not deflocculate in the presence of CTAB, although a concentration-dependent deflocculation was observed in the presence of SDS. A. johnsonii S35 and O. carboxidovorans S23 cells were separately pretreated (prior to coaggregation) with the surfactants. In spite of the partial (complete) loss of viability during SDS (CTAB) pretreatment, washed cells still retained hydrophobic character and displayed significant coaggregation (aggregation index ranging from 84% to 97% in comparison to 96% in the case of non-treated cells), demonstrating reversibility of the surfactant induced deflocculation. Further, when exposed to lower concentration of surfactants (0.2 mg ml(-1) SDS), coaggregates were more resistant (76% viability) as compared to the individual partner (S35: 52%; S23: 39% viability). Since the coaggregates are stable and provide protection from surfactants at lower concentrations (those normally expected in the sewage treatment plants), their presence as well as a sustained role in the sewage sludge bioflocculation is evident.     

Cationic surfactant mediated fibrillogenesis in bovine liver catalase: a biophysical approach

Protein aggregation into oligomers and mature fibrils are associated with more than 20 diseases in humans. The interactions between cationic surfactants dodecyltrimethylammonium bromide (DTAB) and tetradecyltrimethylammonium bromide (TTAB) with varying alkyl chain lengths and bovine liver catalase (BLC) were examined by various biophysical approaches. The delicate coordination of electrostatic and hydrophobic interactions with protein, play imperative role in aggregation. In this article, we have reconnoitered the relation between charge, hydrophobicity and cationic surfactants DTAB and TTAB on BLC at pH 7.4 and 9.4 which are two and four units above pI, respectively. We have used techniques like turbidity, Rayleigh light scattering, far-UV CD, ThT, ANS, Congo red binding assay, DLS, and transmission electron microscopy. The low concentration ranges of DTAB (0–600 μM) and TTAB (0–250 μM) were observed to increase aggregation at pH 9.4. Nevertheless, at pH 7.4 only TTAB was capable of inducing aggregate. DTAB did not produce any significant change in secondary structure at pH 7.4 suggestive of the role of respective charges on surfactants and protein according to the pI and alkyl chain length. The morphology of aggregates was further determined by TEM, which proved the existence of a fibrillar structure. The surfactants interaction with BLC was primarily electrostatic as examined by ITC. Our work demystifies the critical role of charge as well as hydrophobicity in amyloid formation.     

Influences of extracellular polymeric substances (EPS) on the characteristics of activated sludge under non-steady-state conditions

Laboratory experiments were carried out on activated sludge (AS) to investigate the correlations between the content of extracellular polymeric substances (EPS) and the performance of biosolids–water separation, including sludge flocculation, sedimentation, compression, and dewatering, under non-steady-state conditions. On three stabilized AS reactors changes were made in sludge retention time (SRT), substrate composition, and loading rate, respectively, to bring about unstable operation to the reactors. A two-step heating method was used to extract from the sludge the easily extractable EPS, or loosely bound EPS (LB-EPS), and tightly bound EPS (TB-EPS), respectively. The experimental results demonstrate dynamic changes in sludge characteristic and EPS production under the non-steady-state conditions. During the early phase of transition after a change was imposed, the sludge became generally worse in flocculation, compressibility, and dewaterability. With the acclimatization of the biomass to the new process conditions, biosolids–water separation showed a general trend of improvement. Changes in AS process condition also resulted in considerable variations in EPS production. The change of the LB-EPS content appeared to be more significant than that of the TB-EPS. Throughout the non-steady-state operation, the sludge flocculating behavior, settleability, compressibility, and dewaterability had a positive correlation with the LB-EPS content; however, no correlation could be found between these properties and the TB-EPS content. The results suggest that although EPS is essential to biofloc formation, excessive EPS in the form of LB-EPS would weaken cell attachment and deteriorate the AS floc structure, resulting in poor biosolids–water separation.     

Surfactant-mediated amyloidogenesis behavior of stem bromelain; a biophysical insight

Neurodegenerative disorders are mainly associated with amyloid fibril formation of different proteins. Stem bromelain (SB), a cysteine protease, is known to exist as a molten globule state at pH 10.0. It passes through the identical surrounding (pH 10.0) in the gut epithelium of intestine upon oral administration. Protein–surfactant complexes are widely employed as drug carriers, so the nature of surfactant toward protein is of great interest. The present work describes the effect of cationic surfactants (CTAB & DTAB) and their hydrophobic behavior toward amyloidogenesis behavior of SB at pH 10.0. Multiple approaches including light scattering, far UV-CD, turbidity measurements, and dye binding assay (ThT, Congo red and ANS) were performed to measure the aggregation propensity of SB. Further, we monitored the hydrodynamic radii of aggregates formed using dynamic light scattering technique. Structure of fibrils was also visualized through fluorescence microscopy as well as TEM. At pH 10.0, low concentration of CTAB (0–200 μM) induced amyloid formation in SB as evident from a prominent increase in turbidity and light scattering, gain in β-sheet content, and enhanced ThT fluorescence intensity. However, further increase in CTAB concentration suppressed the fibrillation phenomenon. In contrast, DTAB did not induce fibril formation at any concentration used (0–500 μM) due to lower hydrophobicity. Net negative charge developed on protein at high pH (10.0) might have facilitated amyloid formation at low concentration of cationic surfactant (CTAB) due to electrostatic and hydrophobic interactions.     

Dependence of buffer acidity and surfactant chain-length on electro-osmotic mobility in thermoplastic microchannels

In this paper, we report the dependence of buffer pH and coating surfactant chain-length on electro-osmotic (EO) mobility in co-polyester microchannels. Thermoplastics co-polyester hydrolyzes to anionic functionality to create electrical double layer on the micro-channel walls. These negatively charged sites are partially or completely screened when long-chain surfactants are added into the buffer. This ancillary technique to modify surface charge polarity to avoid analyte adsorption is known as dynamic coating. We develop a theory to predict the EO mobility tendency on buffer acidity considering the combination of pH-dependent surfactant aggregation and surface dissociation. Our findings of pH-dependent EO mobility in coated channels, using three types of quaternary ammonium surfactants, lauryltrimethyammonium bromide (LTAB), trimethyl (tetradecyl) ammonium bromide (TTAB), and cetyltrimethyammonium bromide (CTAB), agree with our theoretical prediction. We also explain the chain-length dependence of mobility with a collaborative adsorption mechanism of surfactant aggregates.     

Dewaterability of waste activated sludge with ultrasound conditioning

This study investigated the potential benefits of ultrasound-conditioned sludge dewatering treatments with specific energy dosages from 0 to 35,000 kJ/kg total solids (TS). Capillary suction time (CST) and specific resistance of filtration (SRF) were used to evaluate sludge dewaterability. Sludge water distribution was measured by the drying test and mechanical separation methods. Both extracellular polymeric substance (EPS) content and sludge particle size were determined in an attempt to explain the observed changes in sludge dewaterability. The results indicated that application of low specific energy dosages (<4400 kJ/kg TS) slightly enhanced sludge dewaterability, but larger specific energy dosages (>4400 kJ/kg TS) significantly deteriorated sludge dewaterability. The optimal specific energy to give maximal dewaterability characteristics was found to be 800 kJ/kg TS, which generated sludge with optimal EPS concentration (400-500 mg/l) and particle size distribution (80-90 microm diameter). Subjecting sludge to a combination of cationic polymer and ultrasound pretreatments did not present any clear advantages over polymeric conditioning alone for improving sludge dewaterability. The effects of cationic polymer treatment predominated over those of ultrasound pretreatment when both were used together.     

Improving reactive ink jet printing via cationization of cellulosic linen fabric

Cellulose linen fabric samples subjected to cationization using different cationizing agents: dodecyl trimethyl ammonium bromide (DTAB), tetra methyl ammonium hydroxide (TMAH), and Quat-188, via pad batch technique, followed by ink jet printing with reactive dyes.     

Sensitization of surfactants on the chemiluminescence reaction of fluorescein isothiocyanate labeled proteins

The effect of surfactants on fluorescein isothiocyanate (FITC)–bovine serum albumin (BSA)–hypochlorite (ClO⁻), FITC–human serum albumin (HSA)–ClO⁻, FITC–ovoconalbumin (OVA)–ClO⁻, FITC–hemoglobin (Hb)–ClO⁻ systems were investigated with chemiluminescence method by the reversed phase flow injection. It was found that the chemiluminescence (CL) intensity of each system was increased greatly in the presence of cationic surfactants. Cethyltrimethylammonium bromide (CTAB) is the optimal surfactant of these systems. The optimal conditions of the CL reaction and the optimal concentration of CTAB were examined and the function of cationic surfactant CTAB on the CL reaction was also discussed.     

Study of inclusion complexes of cycloamylose with surfactants by isothermal titration calorimetry

Useful materials can be made from cycloamylose (CA) and the functional properties of CA could be improved by complexation with surfactants. Isothermal titration calorimetry (ITC) was used to investigate interactions between CA and surfactants in buffered solutions. Three surfactants with C₁₂ non-polar tail groups and charged [anionic: sodium dodecyl sulfate (SDS); cationic: dodecyl trimethylammonium bromide (DTAB)] or non-charged headgroups [non-ionic: polyoxyethylene 23 lauryl ether (Brij35)] were used in this study. The effects of temperature, pH, and salt concentration were also studied. All three surfactants bound to CA; however, Brij35 binding to CA was negligible. Enthalpy changes associated with binding of surfactants to CA were exothermic except for interactions measured at 50 °C. There was no effect of pH on surfactant demicellization or CA binding. Salt concentration affected surfactant demicellization, but the amount of SDS bound to CA at saturation was unaffected by salt. When the titration curves obtained for CA with SDS and DTAB were fitted, it could be analyzed using a model based on a single set of identical sites.     

Polyclonal antibodies mediated immobilization of a peroxidase from ammonium sulphate fractionated bitter gourd (Momordica charantia) proteins

Polyclonal antibody bound Sepharose 4B support has been exploited for the immobilization of bitter gourd peroxidase directly from ammonium sulphate precipitated proteins. Immunoaffinity immobilized bitter gourd peroxidase exhibited high yield of immobilization. IgG-Sepharose 4B bound bitter gourd peroxidase showed a higher stability against heat, chaotropic agents (urea and guanidinium chloride), detergents (cetyl trimethyl ammonium bromide and Surf Excel), proteolytic enzyme (trypsin) and water-miscible organic solvents (propanol, THF and dioxane). The activity of immobilized bitter gourd peroxidase was significantly enhanced in the presence of cetyl trimethyl ammonium bromide and after treatment with trypsin as compared to soluble enzyme.     

Pluronic Triblock Copolymer Encapsulated Gold Nanorods as Biocompatible Localized Plasmon Resonance-Enhanced Scattering Probes for Dark-Field Imaging of Cancer Cells

Gold nanorods (GNR) are synthesized using cetylmethylammonium bromide (CTAB) surfactants which function as structure-directing agents. However, CTAB forms a tightly bound cationic bilayer on GNR surface with the cationic trimethylammonium head group exposed to the aqueous media, which is known to be highly toxic in vitro and in vivo. Pluronic is a non-ionic triblock polymer, which can associate with CTAB and form stable CTAB?Cpolymer complexes due to hydrophobic interactions. In this work, two types of Pluronic triblock copolymers were used to encapsulate GNR to reduce their cytotoxicity and improve colloidal and optical stability for biological applications. These formulations were characterized by UV?Cvis absorption spectra analysis, transmission electron microscopy, cell viability studies, differential interference contrast microscopy and dark-field imaging.