New Nonnucleoside Substrates for Terminal Deoxynucleotidyl Transferase: Synthesis and Dependence of Substrate Properties on Structure

N-(9-Fluorenylmethoxycarbonyl)-ω-aminoalkyl-, N-(9-fluorenylmethoxycarbonyl)-8-amino-3,6-dioxaoctyl, and N-[(9-fluorenylmethoxycarbonyl)-6-aminohexanoyl]-2-aminoethyl triphosphates were synthesized. All of them were shown to be the substrates of the calf thymus terminal deoxynucleotidyl transferase. Their substrate properties depend on the length and structure of the linker between the 9-fluorenylmethoxycarbonyl and triphosphate moieties.__________Translated from Bioorganicheskaya Khimiya, Vol. 31, No. 4, 2005, pp. 394–398.Original Russian Text Copyright © 2005 by Khandazhinskaya, Kukhanova, Jasko.     

High-level expression of murine terminal deoxynucleotidyl transferase inEscherichia coli grown at low temperature and overexpressingargU tRNA

Terminal deoxynucleotidyl transferase (TdT) is a highly conserved vertebrate enzyme that possesses the unique ability to catalyze the random addition of deoxynucleoside 5′-triphosphates onto the 3′-hydroxyl group of a single-stranded DNA. It plays an important role in the generation of immunoglobin and T-cell receptor diversity. TdT is usually obtained from animal thymus gland or produced in a baculovirus system, but both procedures are rather tedious, and proteolysis occurs during purification. Attempts to overexpress TdT in bacteria have been unsuccessful or have yielded an enzyme with a lower specific activity. A dearth of TdT has thus hampered detailed structural and functional studies. In the present study, we report that by lowering growth temperature and overexpressing a rare arginyl tRNA, it is possible to boost the production inEscherichia coli of murine TdT with minimal proteolysis and high specific activity.     

Synthesis of non-nucleoside triphosphate analogues, a new type of substrates for terminal deoxynucleotidyl transferase

A series of non-nucleoside triphosphate analogues were synthesized. In place of the nucleoside fragment, substituents bearing aromatic groups were introduced; the triphosphate component was replaced at alpha, beta, or gamma-positions by phosphonates. Alpha-[2-N-(9-Fluorenylmethoxycarbonyl)aminoethylphosphonyl]-beta,gamma-difluoromethylenediphosphonate (IIc) revealed the best substrate properties toward terminal deoxynucleotidyl transferase.     

Design of reactive-end DNA oligomers via incorporation of oxanine into oligonucleotides using terminal deoxynucleotidyl transferase

Oxanine (Oxa, O), a modified nucleobase, has a novel O-acylisourea structure. Oxa-incorporated oligodeoxynucleotides (ODNs) are reactive DNA oligomers that permit conjugation with various nucleophilic molecules in an activation-free manner. In this study, we developed a new procedure for enzymatic preparation of reactive-end DNA oligomers, using terminal deoxynucleotidyl transferase (TdT), in which a reactive Oxa base is incorporated into the 3′-end of ODNs. One limitation of TdT, an enzyme widely used for end labeling of DNA oligomers, is that it is difficult to control the number of incorporated labels, because it shows template-independent extension with random nucleotides. Notably, TdT showed a rate and efficiency of incorporation of the modified nucleobase, Oxa, different from that of natural bases. We investigated the conditions of TdT-mediated DNA incorporation of Oxa and achieved incorporation of Oxa at the 3′-end of ODNs by optimizing reaction parameters such as temperature and enzyme, cofactor, and substrate concentrations. We also confirmed the reactive functionality of Oxa after incorporation into ODNs by amide bonding conjugation with a polyamine (spermine) under physiological conditions, without need for an additional activation step.     

Synthesis of spin labelled deoxynucleotide analogues and their incorporation with terminal deoxynucleotidyl transferase into DNA

The synthesis of novel spin labelled deoxynucleoside-5′-triphosphates and their enzymatic incorporation with terminal deoxynucleotidyl transferase into DNA are described.     

The semi-quantitative comparison of oxidative stress mediated DNA single and double strand breaks using terminal deoxynucleotidyl transferase mediated end labeling combined with a slot blot technique

The accumulation of DNA damages by environmental stresses is represented by the steady state level of single strand breaks (SSBs) and double strand breaks (DSBs). Terminal deoxynucleotidyl transferase (TdT) mediated end labeling is suitable in detecting DSBs, but is unsuitable for SSBs due to its catalyzing characteristics. However, the sensitivity of TdT to detect SSBs may be significantly improved by first denaturing the double strands and expose all the DNA nicks as potential substrates for TdT. By coupling DNA denaturation to slot blot southern hybridization, the authors demonstrate the sensitive detection of SSBs as well as DSBs in 20 ng DNA samples derived from a retinal pigment epithelial cell line treated with tert-butyl hydroperoxide. The signal intensity of denatured and TdT-treated DNA in slot blot hybridization correlated to the amount of SSBs calculated in an S1 nuclease digestion assay. The signal ratio between denatured and non-denatured DNA likely approximates the SSBs/DSBs ratio in genomic DNA. The combination of DNA denaturing, TdT treatment and slot blot hybridization could be a useful method to assess oxidative stress-induced DNA strand damages.     

New non-nucleoside substrates for terminal deoxynucleotidyl transferase: the synthesis and the dependence of substrate properties on structure

N-(9-Fluorenylmethoxycarbonyl)-omega-aminoalkyl, N-(9-fluorenylmethoxycarbonyl)-8-amino-3,6-dioxaoctyl, and N-(9-fluorenylmethoxycarbonyl)-6-aminohexanoyl]-2-aminoethyl triphosphates were synthesized. All of them were shown to be the substrates of the calf thymus terminal deoxynucleotidyl transferase. Their substrate properties depend on the length and structure of linker between the 9-fluorenylmethoxycarbonyl and triphosphate moieties.     

Characterization of a new fluorogenic substrate for microsomal glutathione transferase 1

A new thiol-reactive electrophilic, disubstituted rhodamine-based fluorogenic probe (bis-2,4-dinitrobenzenesulfonyl rhodamine [BDR]) with very high quantum yield was synthesized and described recently [A. Shibata et al., Bioorg. Med. Chem. Lett. 18 (2008) 2246-2249]. Because hydrophobic electrophiles are often conjugated by glutathione transferases, the BDR or monosubstituted rhodamine derivatives (2,4-dinitrobenzenesulfonyl rhodamine [DR]) were tested with microsomal glutathione transferase 1 (MGST1) and shown to function as substrates. The kinetic parameters for purified enzyme and DR were k_cat = 0.075 ± 0.005 s⁻¹ and K_m = 21 ± 3 μM (k_cat/K_m = 3.6 × 10³ ± 5.6 × 10² M⁻¹ s⁻¹), giving a rate enhancement of 10⁶ compared with the nonenzymatic reaction. In cells overexpressing MGST1, the addition of BDR caused a time-dependent increase of fluorescence compared with control cells. Preincubating the cells with a thiol reagent (N-ethylmaleimide) abolished the fluorescent signal. By using DR, we could determine the MGST1 activity in whole cell extracts with high sensitivity. In addition, the activity could be increased by thiol reagents (a hallmark of MGST1). Thus, we have identified a new fluorogenic substrate for MGST1 that will be a useful tool in the study of this enzyme and related enzymes.     

Substrate size selectivity of 20S proteasomes: analysis with variable-sized synthetic substrates

Proteasomes are tubular complexes with proteolytic activities on their lumenal surfaces so that large substrates should be sterically hindered from reaching the catalytic sites. Here we examine effects of substrate size on rates of cleavage by 20S proteasomes of Methanosarcina thermophila. Synthetic chromogenic substrates of variable size were prepared by linking a constant substrate group (Ala-Ala-Phe-p-nitroanilide) to a linear polymer (methoxypolyethylene glycol) with variable chain length. The smallest macromolecular substrates were cleaved more efficiently than free tripeptide substrate, and cleavage of macromolecular substrates was saturable, whereas cleavage of free tripeptide substrate was not, indicating mechanistic differences between the cleavage of large and small substrates. Rates of macromolecular substrate cleavage decreased progressively up to 10-fold as the size of the polymeric component of substrates increased. Macromolecular synthetic substrates appear to be better models of proteasome action on natural protein substrates and demonstrate substrate size selectivity of proteasomes.     

Photoaffinity labeling of terminal deoxynucleotidyl transferase. 1. Active site directed interactions with 8-azido-2'-deoxyadenosine 5'-triphosphate

A photoaffinity analogue of dATP, 8-azido-2'-deoxyadenosine 5'-triphosphate (8-azido-dATP), was used to probe the nucleotide binding site of the non-template-directed DNA polymerase terminal deoxynucleotidyl transferase (EC 2.7.7.31). The Mg2+ form of 8-azido-dATP was shown to be an efficient enzyme substrate with a Km of 53 microM. Loss of enzyme activity occurred during UV photolysis only in the presence of 8-azido-dATP. At saturation (120 microM 8-azido-dATP), 54% of the protein molecules were modified as determined by inhibition of enzyme activity. Kinetic analysis of enzyme inhibition induced by photoincorporation of 8-azido-dATP indicated an apparent Kd of approximately 38 microM. Addition of 2 mM dATP to 120 microM 8-azido-dATP resulted in greater than 90% protection from photoinduced loss of enzyme activity. In contrast, no protection was observed with the addition of 2 mM dAMP. Enzyme inactivation was directly correlated with incorporation of radiolabeled 8-azido-dATP into the protein and UV-induced destruction of the azido group. Photoincorporation of 8-azido-dATP into terminal transferase was reduced by all purine and pyrimidine deoxynucleoside triphosphates of which dGTP was the most effective. The alpha and beta polypeptides of calf terminal transferase were specifically photolabeled by [gamma-32P]-8-azido-dATP, and both polypeptides were equally protected by all four deoxynucleoside triphosphates. This suggests that the nucleotide binding domain involves components from both polypeptides.     

Terminal deoxynucleotidyl transferase: The story of a misguided DNA polymerase

Nearly every DNA polymerase characterized to date exclusively catalyzes the incorporation of mononucleotides into a growing primer using a DNA or RNA template as a guide to direct each incorporation event. There is, however, one unique DNA polymerase designated terminal deoxynucleotidyl transferase that performs DNA synthesis using only single-stranded DNA as the nucleic acid substrate. In this chapter, we review the biological role of this enigmatic DNA polymerase and the biochemical mechanism for its ability to perform DNA synthesis in the absence of a templating strand. We compare and contrast the molecular events for template-independent DNA synthesis catalyzed by terminal deoxynucleotidyl transferase with other well-characterized DNA polymerases that perform template-dependent synthesis. This includes a quantitative inspection of how terminal deoxynucleotidyl transferase binds DNA and dNTP substrates, the possible involvement of a conformational change that precedes phosphoryl transfer, and kinetic steps that are associated with the release of products. These enzymatic steps are discussed within the context of the available structures of terminal deoxynucleotidyl transferase in the presence of DNA or nucleotide substrate. In addition, we discuss the ability of proteins involved in replication and recombination to regulate the activity of the terminal deoxynucleotidyl transferase. Finally, the biomedical role of this specialized DNA polymerase is discussed focusing on its involvement in cancer development and its use in biomedical applications such as labeling DNA for detecting apoptosis.     

Controlled ribonucleotide tailing of cDNA ends (CRTC) by terminal deoxynucleotidyl transferase: a new approach in PCR-mediated analysis of mRNA sequences.

Controlled ribonucleotide tailing of cDNA ends (CRTC) by terminal deoxynucleotidyl transferase is a polymerase chain reaction (PCR)-mediated technique that was developed to facilitate cloning and direct sequence analysis of complete 5'-terminal unknown coding regions of rare RNA molecules. In contrast with standard tailing protocols using dNTPs as the substrate, ribo-tailing of cDNA ends is easily controllable, self-limited (from two to four rNMP incorporations) and highly efficient (>98%). By virtue of the homopolymeric ribo-tail, the modified cDNA is anchored to the 3' overhang of a double-stranded DNA-adaptor in a T4 DNA ligase-dependent ligation. PCR amplification, mediated by two sequence-specific primers, yields the desired unique product suitable for cloning and dideoxy-sequencing.     

Engineering a new C-terminal tail in the H-site of human glutathione transferase P1-1: structural and functional consequences

We have sought the structural basis for the differing substrate specificities of human glutathione transferase P1-1 (class Pi) and human glutathione transferase A1-1 (class Alpha) by adding an extra helix (helix 9), found in the electrophilic substrate-binding site (H-site) of the human class Alpha enzyme, at the C terminus of the human class Pi enzyme. This class Pi-chimera (CODA) was expressed in Escherichia coli, purified and characterized by kinetic and crystallographic approaches. The presence of the newly engineered tail in the H-site of the human Pi enzyme alters its catalytic properties towards those exhibited by the human Alpha enzyme, as assessed using cumene hydroperoxide (diagnostic for class Alpha enzymes) and ethacrynic acid (diagnostic for class Pi) as co-substrates. There is a change of substrate selectivity in the latter case, as the k(cat)/K(m)(EA) value decreases about 70-fold, compared to that of class Pi. With 1-chloro-2,4-dinitrobenzene as co-substrate there is a loss of catalytic activity to about 2% with respect to that of the Pi enzyme. Crystallographic and kinetic studies of the class Pi-chimera provide important clues to explain these altered catalytic properties. The new helix forms many complimentary interactions with the rest of the protein and re-models the original electrophilic substrate-binding site towards one that is more enclosed, albeit flexible. Of particular note are the interactions between Glu205 of the new tail and the catalytic residues, Tyr7 and Tyr108, and the thiol moiety of glutathione (GSH). These interactions may provide an explanation of the more than one unit increase in the pK(a) value of the GSH thiolate and affect both the turnover number and GSH binding, using 1-chloro-2,4-dinitrobenzene as co-substrate. The data presented are consistent with the engineered tail adopting a highly mobile or disordered state in the apo form of the enzyme.     

Preliminary characterization of a new exo-β-(1,4)-galactanase with transferase activity

As a prerequisite to the study of the fine chemical structure of the branched region of pectin, an exo-β-(1,4)-galactanase was purified from a commercial preparation (Pectinex AR). Purification was carried out by precipitation with 70% saturated ammonium sulfate, preparative electrofocusing, anion-exchange chromatography and affinity chromatography on cross-linked alginate. Exogalactanase specific activity was 992 nkat mg^-1 and the enzyme was devoid of β-(1,3)- or β-(1,6)-galactanase, arabinanase, β-d-galactosidase and -l-arabinofuranosidade activities. Residual exopolygalacturonase activity represented 2.9% of the galactanase activity. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and isoelectric focusing showed two close bands with molecular weights of 120 000 and 90 000 and pHi of 3.8 and 4.1, respectively. The enzyme acted in an exo manner and its activity was optimum at pH 3.5 and 60°C. When incubated with galacto-oligosaccharides, new oligosaccharides with a higher degree of polymerization appeared, indicating the ability of the enzyme to transfer galactose residues.     

Structural determinants in domain II of human glutathione transferase M2-2 govern the characteristic activities with aminochrome, 2-cyano-1,3-dimethyl-1-nitrosoguanidine, and 1,2-dichloro-4-nitrobenzene

Two human Mu class glutathione transferases, hGST M1-1 and hGST M2-2, with high sequence identity (84%) exhibit a 100-fold difference in activities with the substrates aminochrome, 2-cyano-1,3-dimethyl-1-nitrosoguanidine (cyanoDMNG), and 1,2-dichloro-4-nitrobenzene (DCNB), hGST M2-2 being more efficient. A sequence alignment with the rat Mu class GST M3-3, an enzyme also showing high activities with aminochrome and DCNB, demonstrated an identical structural cluster of residues 164-168 in the alpha6-helices of rGST M3-3 and hGST M2-2, a motif unique among known sequences of human, rat, and mouse Mu class GSTs. A putative electrostatic network Arg107-Asp161-Arg165-Glu164(-Gln167) was identified based on the published three-dimensional structure of hGST M2-2. Corresponding variant residues of hGSTM1-1 (Leu165, Asp164, and Arg167) as well as the active site residue Ser209 were targeted for point mutations, introducing hGST M2-2 residues to the framework of hGST M1-1, to improve the activities with substrates characteristic of hGST M2-2. In addition, chimeric enzymes composed of hGST M1-1 and hGST M2-2 sequences were analyzed. The activity with 1-chloro-2,4-dinitrobenzene (CDNB) was retained in all mutant enzymes, proving that they were catalytically competent, but none of the point mutations improved the activities with hGST M2-2 characteristic substrates. The chimeric enzymes showed that the structural determinants of these activities reside in domain II and that residue Arg165 in hGST M2-2 appears to be important for the reactions with cyanoDMNG and DCNB. A mutant, which contained all the hGST M2-2 residues of the putative electrostatic network, was still lacking one order of magnitude of the activities with the characteristic substrates of wild-type hGST M2-2. It was concluded that a limited set of point mutations is not sufficient, but that indirect secondary structural affects also contribute to the hGST M2-2 characteristic activities with aminochrome, cyanoDMNG, and DCNB.     

Predicting subsite interactions of plasmin with substrates and inhibitors through computational docking analysis

Plasmin plays important roles in various physiological systems. The identification of inhibitors controlling its regulation represents a promising drug-discovery challenge. To develop selective inhibitors of plasmin, structural information of the binding modes is crucial. Here, a computational docking study was conducted to provide structural insight into plasmin subsite interactions with substrates/inhibitors. Predicted binding modes of two peptide-substrates (D/L-Ile-Phe-Lys), and potent and weak inhibitors (YO-2 and PKSI-527) suggested non-prime and prime subsite interactions relevant to recognition by plasmin. Predicted binding modes also correlated well with the experimental structure–activity relationships for plasmin substrates/inhibitors, namely the differences of K_M values between the D- and L-peptide-substrates and inhibitory potencies of YO-2 and PKSI-527. In particular, interaction observed at a hydrophobic pocket near S2 and at a tunnel-shaped hydrophobic S1′ was strongly suggested to be significantly involved in tight binding of inhibitors to plasmin. Our present findings may aid in the design of potent and selective plasmin inhibitors.