Structural analysis of viral nucleocapsids by subtraction of partial projections

The nucleocapsid of flavivirus particles does not have a recognizable capsid structure when using icosahedral averaging for cryo-electron microscopy structure determinations. The apparent absence of a definitive capsid structure could be due to a lack of synchronization of the symmetry elements of the external glycoprotein layer with those of the core or because the nucleocapsid does not have the same structure within each particle. A technique has been developed to determine the structure of the capsid, and possibly also of the genome, for icosahedral viruses, such as flaviviruses, using cryo-electron microscopy. The method is applicable not only to the analyses of viral cores, but also to the missing structure of multi-component complexes due to symmetry mismatches. The density contributed by external glycoprotein and membrane layers, derived from previously determined three-dimensional icosahedrally averaged reconstructions, was subtracted from the raw images of the virus particles. The resultant difference images were then used for a three-dimensional reconstruction. After appropriate test data sets were constructed and tested, the procedure was applied to examine the nucleocapsids of flaviviruses, which showed that there is no distinct protein density surrounding the genome. Furthermore, there was no evidence of any icosahedral symmetry within the nucleocapsid core.     

Nucleic acid-dependent cross-linking of the nucleocapsid protein of Sindbis virus

The assembly of the alphavirus nucleocapsid core is a multistep event requiring the association of the nucleocapsid protein with nucleic acid and the subsequent oligomerization of capsid proteins into an assembled core particle. Although the mechanism of assembly has been investigated extensively both in vivo and in vitro, no intermediates in the core assembly pathway have been identified. Through the use of both truncated and mutant Sindbis virus nucleocapsid proteins and a variety of cross-linking reagents, a possible nucleic acid-protein assembly intermediate has been detected. The cross-linked species, a covalent dimer, has been detected only in the presence of nucleic acid and with capsid proteins capable of binding nucleic acid. Optimum nucleic acid-dependent cross-linking was seen at a protein-to-nucleic-acid ratio identical to that required for maximum binding of the capsid protein to nucleic acid. Identical results were observed when cross-linking in vitro assembled core particles of both Sindbis and Ross River viruses. Purified cross-linked dimers of truncated proteins and of mutant proteins that failed to assemble were found to incorporate into assembled core particles when present as minor components in assembly reactions, suggesting that the cross-linking traps an authentic intermediate in nucleocapsid core assembly. Endoproteinase Lys-C mapping of the position of the cross-link indicated that lysine 250 of one capsid protein was cross-linked to lysine 250 of an adjacent capsid protein. Examination of the position of the cross-link in relation to the existing model of the nucleocapsid core suggests that the cross-linked species is a cross-capsomere contact between a pentamer and hexamer at the quasi-threefold axis or is a cross-capsomere contact between hexamers at the threefold axis of the icosahedral core particle and suggests several possible assembly models involving a nucleic acid-bound dimer of capsid protein as an early step in the assembly pathway.     

Packaging of up to 240 subunits of a 17 kDa nuclease into the interior of recombinant hepatitis B virus capsids

The icosahedral nucleocapsid of hepatitis B virus (HBV) consists of multiple subunits of a single 183 amino acids (aa) core protein encasing the viral genome. However, recombinant core protein alone also forms capsid-like particles. We have recently shown that a 238 aa protein centrally inserted into the core protein can be displayed on the particle surface. Here we demonstrate that replacement of the C-terminal basic domain by the 17 kDa Staphylococcus aureus nuclease also yields particles but that in these the foreign domains are located in the interior. The packaged nuclease is enzymatically active, and the chimeric protein forms mosaic particles with the wild-type core protein. Hence the HBV capsid is useful as a molecular platform which, dependent on the fusion site, allows foreign protein domains to either be packaged into or be exposed on the exterior of the particle. These results are of relevance for the use of the HBV capsid as a vaccine carrier, and as a target for antiviral therapy.     

In vitro assembly of Sindbis virus core-like particles from cross-linked dimers of truncated and mutant capsid proteins

A nucleic acid-bound capsid protein dimer was previously identified using a Sindbis virus in vitro nucleocapsid assembly system and cross-linking reagents. Cross-link mapping, in combination with a model of the nucleocapsid core, suggested that this dimer contained one monomer from each of two adjacent capsomeres. This intercapsomere dimer is believed to be the initial intermediate in the nucleocapsid core assembly mechanism. This paper presents the purification of cross-linked dimers of a truncated capsid protein and the partial purification of cross-linked dimers of a full-length assembly-defective mutant. The assembly of core-like particles from these cross-linked capsid protein dimers is demonstrated. Core-like particles generated from cross-linked full-length mutant CP(19-264)L52D were examined by electron microscopy and appeared to have a morphology similar to that of wild-type in vitro-assembled core-like particles, although a slight size difference was often visible. Truncated cross-linked CP(81-264) dimers generated core-like particles as well. These core-like particles could subsequently be disassembled when reversible cross-linking reagents were used to form the dimers. The ability of the covalent intercapsomere cross-link to rescue capsid proteins with assembly defects or truncations in the amino-terminal region of the capsid protein supports the previous model of assembly and suggests a possible role for the amino-terminal region of the protein.     

In Vitro Assembly of Alphavirus Cores by Using Nucleocapsid Protein Expressed in Escherichia coli

The production of the alphavirus virion is a multistep event requiring the assembly of the nucleocapsid core in the cytoplasm and the maturation of the glycoproteins in the endoplasmic reticulum and the Golgi apparatus. These components associate during the budding process to produce the mature virion. The nucleocapsid proteins of Sindbis virus and Ross River virus have been produced in a T7-based Escherichia coli expression system and purified. In the presence of single-stranded but not double-stranded nucleic acid, the proteins oligomerize in vitro into core-like particles which resemble the native viral nucleocapsid cores. Despite their similarities, Sindbis virus and Ross River virus capsid proteins do not form mixed core-like particles. Truncated forms of the Sindbis capsid protein were used to establish amino acid requirements for assembly. A capsid protein starting at residue 19 [CP(19-264)] was fully competent for in vitro assembly, whereas proteins with further N-terminal truncations could not support assembly. However, a capsid protein starting at residue 32 or 81 was able to incorporate into particles in the presence of CP(19-264) or could inhibit assembly if its molar ratio relative to CP(19-264) was greater than 1:1. This system provides a basis for the molecular dissection of alphavirus core assembly.     

Sindbis virus nucleocapsid assembly: RNA folding promotes capsid protein dimerization

In Sindbis virus, initiation of nucleocapsid core assembly begins with recognition of the encapsidation signal of the viral RNA genome by capsid protein. This nucleation event drives the recruitment of additional capsid proteins to fully encapsidate the genome, generating an icosahedral nucleocapsid core. The encapsidation signal of the Sindbis virus genomic RNA has previously been localized to a 132-nucleotide region of the genome within the coding region of the nsP1 protein, and the RNA-binding activity of the capsid was previously mapped to a central region of the capsid protein. It is unknown how capsid protein binding to encapsidation signal leads to ordered oligomerization of capsid protein and nucleocapsid core assembly. To address this question, we have developed a mobility shift assay to study this interaction. We have characterized a 32 amino acid peptide capable of recognizing the Sindbis virus encapsidation signal RNA. Using this peptide, we were able to observe a conformational change in the RNA induced by capsid protein binding. Binding is tight (K(d)(app) = 12 nM), and results in dimerization of the capsid peptide. Mutational analysis reveals that although almost every predicted secondary structure within the encapsidation signal is required for efficient protein binding, the identities of the bases within the helices and hairpin turns of the RNA do not need to be maintained. In contrast, two purine-rich loops are essential for binding. From these data, we have developed a model in which the encapsidation signal RNA adopts a highly folded structure and this folding process directs early events in nucleocapsid assembly.     

Mapping of amino acid side chains on the surface of hepatitis B virus capsids required for envelopment and virion formation

The crystal structure of recombinant hepatitis B virus (HBV) capsids formed by 240 core proteins has recently been published. We wanted to map sites on the surface of the icosahedral 35-nm particle that are important for nucleocapsid envelopment by HBV surface proteins during virion morphogenesis. For this purpose, we individually mutated 52 amino acids (aa) within the N-terminal 140 aa of the 185-aa long core protein displaying their side chains to the external surface of the capsid to alanine residues. The phenotype of the mutations with respect to virion formation was tested by transcomplementation of a core gene-negative HBV genome in transiently cotransfected cells, immunoprecipitation of nucleocapsids from cells and secreted virions from culture media, and detection of the particles by radioactive endogenous polymerase reactions. Thirteen point mutations impeded nucleocapsid detection by endogenous polymerase reactions. Twenty-seven mutations were compatible with virion formation. Among these were all capsid-forming mutations in the upper half of the spike protruding from the particle shell and two additional triple mutations at tip of the spike. Eleven mutations (S17, F18, L60, L95, K96, F122, I126, R127, N136, A137, and I139) allowed nucleocapsid formation but blocked particle envelopment and virion formation to undetectable levels. These mutations map to a ring-like groove around the base of the spike and to a small area at the capsid surface close to the pores in the capsid shell. These residues are candidate sites for the interaction with envelope proteins during virion morphogenesis.     

Membrane proteins organize a symmetrical virus

Alphaviruses are enveloped icosahedral viruses that mature by budding at the plasma membrane. According to a prevailing model maturation is driven by binding of membrane protein spikes to a preformed nucleocapsid (NC). The T = 4 geometry of the membrane is thought to be imposed by the NC through one-to-one interactions between spike protomers and capsid proteins (CPs). This model is challenged here by a Semliki Forest virus capsid gene mutant. Its CPs cannot assemble into NCs, or its intermediate structures, due to defective CP-CP interactions. Nevertheless, it can use its horizontal spike-spike interactions on membrane surface and vertical spike-CP interactions to make a particle with correct geometry and protein stoichiometry. Thus, our results highlight the direct role of membrane proteins in organizing the icosahedral conformation of alphaviruses.     

Generation of filamentous instead of icosahedral particles by repression of African swine fever virus structural protein pB438L

The mechanisms involved in the construction of the icosahedral capsid of the African swine fever virus (ASFV) particle are not well understood at present. Capsid formation requires protein p72, the major capsid component, but other viral proteins are likely to play also a role in this process. We have examined the function of the ASFV structural protein pB438L, encoded by gene B438L, in virus morphogenesis. We show that protein pB438L associates with membranes during the infection, behaving as an integral membrane protein. Using a recombinant ASFV that inducibly expresses protein pB438L, we have determined that this structural protein is essential for the formation of infectious virus particles. In the absence of the protein, the virus assembly sites contain, instead of icosahedral particles, large aberrant tubular structures of viral origin as well as bilobulate forms that present morphological similarities with the tubules. The filamentous particles, which possess an aberrant core shell domain and an inner envelope, are covered by a capsid-like layer that, although containing the major capsid protein p72, does not acquire icosahedral morphology. This capsid, however, is to some extent functional, as the filamentous particles can move from the virus assembly sites to the plasma membrane and exit the cell by budding. The finding that, in the absence of protein pB438L, the viral particles formed have a tubular structure in which the icosahedral symmetry is lost supports a role for this protein in the construction or stabilization of the icosahedral vertices of the virus particle.     

Native hepatitis B virions and capsids visualized by electron cryomicroscopy

Hepatitis B virus (HBV) infects more than 350 million people, of which one million will die every year. The infectious virion is an enveloped capsid containing the viral polymerase and double-stranded DNA genome. The structure of the capsid assembled in vitro from expressed core protein has been studied intensively. However, little is known about the structure and assembly of native capsids present in infected cells, and even less is known about the structure of mature virions. We used electron cryomicroscopy (cryo-EM) and image analysis to examine HBV virions (Dane particles) isolated from patient serum and capsids positive and negative for HBV DNA isolated from the livers of transgenic mice. Both types of capsids assembled as icosahedral particles indistinguishable from previous image reconstructions of capsids. Likewise, the virions contained capsids with either T = 3 or T = 4 icosahedral symmetry. Projections extending from the lipid envelope were attributed to surface glycoproteins. Their packing was unexpectedly nonicosahedral but conformed to an ordered lattice. These structural features distinguish HBV from other enveloped viruses.     

Intracellular hepadnavirus nucleocapsids are selected for secretion by envelope protein-independent membrane binding

Hepadnaviruses are DNA viruses but, as pararetroviruses, their morphogenesis initiates with the encapsidation of an RNA pregenome, and these viruses have therefore evolved mechanisms to exclude nucleocapsids that contain incompletely matured genomes from participating in budding and secretion. We provide here evidence that binding of hepadnavirus core particles from the cytosol to their target membranes is a distinct step in morphogenesis, discriminating among different populations of intracellular capsids. Using the duck hepatitis B virus (DHBV) and a flotation assay, we found about half of the intracellular capsids to be membrane associated due to an intrinsic membrane-binding affinity. In contrast to free cytosolic capsids, this subpopulation contained largely mature, double-stranded DNA genomes and lacked core protein hyperphosphorylation, both features characteristic for secreted virions. Against expectation, however, the selective membrane attachment observed did not require the presence of the large DHBV envelope protein, which has been considered to be crucial for nucleocapsid-membrane interaction. Furthermore, removal of surface-exposed phosphate residues from nonfloating capsids by itself did not suffice to confer membrane affinity and, finally, hyperphosphorylation was absent from nonenveloped nucleocapsids that were released from DHBV-transfected cells. Collectively, these observations argue for a model in which nucleocapsid maturation, involving the viral genome, capsid structure, and capsid dephosphorylation, leads to the exposure of a membrane-binding signal as a step crucial for selecting the matured nucleocapsid to be incorporated into the capsid-independent budding of virus particles.     

Role of sindbis virus capsid protein region II in nucleocapsid core assembly and encapsidation of genomic RNA

Sindbis virus is an enveloped positive-sense RNA virus in the alphavirus genus. The nucleocapsid core contains the genomic RNA surrounded by 240 copies of a single capsid protein. The capsid protein is multifunctional, and its roles include acting as a protease, controlling the specificity of RNA that is encapsidated into nucleocapsid cores, and interacting with viral glycoproteins to promote the budding of mature virus and the release of the genomic RNA into the newly infected cell. The region comprising amino acids 81 to 113 was previously implicated in two processes, the encapsidation of the viral genomic RNA and the stable accumulation of nucleocapsid cores in the cytoplasm of infected cells. In the present study, specific amino acids within this region responsible for the encapsidation of the genomic RNA have been identified. The region that is responsible for nucleocapsid core accumulation has considerable overlap with the region that controls encapsidation specificity.     

Effect of nucleocapsid on multimerization of gypsy structural protein Gag

The structural protein (Gag) of the gypsy Drosophila retrovirus lacks matrix, but contains capsid and nucleocapsid domains. The Gag forms virus-like particles in a bacterial cell; besides, its capsid alone is able to form aggregates. However, aggregates assembled from the capsid were variable in size and displayed much less organization than particles formed by the whole Gag. The nucleocapsid exerts influence on the organization and structure of particles, and this function is directed by sequence of amino acid residues at its N-terminus (a nucleocapsid proximal part). The particle assembling occurs in the presence of any RNAs or single stranded DNA oligonucleotides.     

Effect of nucleocapsid on multimerization of <Emphasis Type="Italic">gypsy</Emphasis> structural protein GAG

The structural protein (Gag) of Drosophila retrovirus gypsy contains capsid and nucleocapsid domains. Gag forms virus-like particles in a bacterial cell; furthermore, its capsid alone is able to form aggregates. However, aggregates assembled from the capsid vary in size and are less organized than particles formed by a full-length Gag. The nucleocapsid determines the organization and structure of the particles, which is ensured by the amino acid residues at its N-terminal (a nucleocapsid proximal part). The assembly of the particle occurs in the presence of any RNAs or single-stranded DNA oligonucleotides.     

Transcapsidation and the conserved interactions of two major structural proteins of a pair of phytoreoviruses confirm the mechanism of assembly of the outer capsid layer

The strongly conserved amino acid sequences of the P8 outer capsid proteins of Rice dwarf virus (RDV) and Rice gall dwarf virus (RGDV) and the distribution of electrostatic potential on the proteins at the interfaces between structural proteins suggested the possibility that P8-trimers of RGDV might bind to the 3-fold symmetrical axes of RDV core particles, with vertical interaction between heterologous P3 and P8 proteins and lateral binding of homologous P8 proteins, thereby allowing formation of the double-layered capsids that are characteristic of viruses that belong to the family Reoviridae. We proved this hypothesis using chimeric virus-like particles composed of the P3 core capsid protein of RDV and the P8 outer capsid protein of RGDV, which were co-expressed in a baculovirus expression system. This is the first report on the molecular biological proof of the mechanism of the assembly of the double-layered capsids with disparate icosahedral lattices.     

Assembly of retrovirus capsid-nucleocapsid proteins in the presence of membranes or RNA

Retrovirus Gag precursor (PrGag) proteins direct the assembly of roughly spherical immature virus particles, while after proteolytic processing events, the Gag capsid (CA) and nucleocapsid (NC) domains condense on viral RNAs to form mature retrovirus core structures. To investigate the process of retroviral morphogenesis, we examined the properties of histidine-tagged (His-tagged) Moloney murine leukemia (M-MuLV) capsid plus nucleocapsid (CANC) (His-MoCANC) proteins in vitro. The His-MoCANC proteins bound RNA, possessed nucleic acid-annealing activities, and assembled into strand, circle (or sphere), and tube forms in the presence of RNA. Image analysis of electron micrographs revealed that tubes were formed by cage-like lattices of CANC proteins surrounding at least two different types of protein-free cage holes. By virtue of a His tag association with nickel-chelating lipids, His-MoCANC proteins also assembled into planar sheets on lipid monolayers, mimicking the membrane-associated immature PrGag protein forms. Membrane-bound His-MoCANC proteins organized into two-dimensional (2D) cage-like lattices that were closely related to the tube forms, and in the presence of both nickel-chelating lipids and RNAs, 2D lattice forms appeared similar to lattices assembled in the absence of RNA. Our observations are consistent with a M-MuLV morphogenesis model in which proteolytic processing of membrane-bound Gag proteins permits CA and NC domains to rearrange from an immature spherical structure to a condensed mature form while maintaining local protein-protein contacts.     

Structure and Composition of a Small Particle Prepared from a Simian Adenovirus.

Mayor, Heather D. (Baylor University College of Medicine, Houston, Tex.), Richard M. Jamison, Liane E. Jordan, and Joseph L. Melnick. Structure and composition of a small particle prepared from a simian adenovirus. J. Bacteriol. 90:235-242. 1965.-When tissue-culture fluids infected with simian adenovirus SV15 are examined in an electron microscope, either as fresh harvests or after treatment with Genetron, typical mature adenovirus particles are found. These are 65 to 70 mmu in diameter, with an icosahedral capsid built from 252 capsomeres. Also present is a population of small polyhedral particles approximately 20 mmu in diameter. These small particles can be separated from the mature virions by ultrafiltration or density gradient centrifugation. The small particles have a density of 1.43 in cesium chloride. They contain protein and double-stranded deoxyribonucleic acid. They appear to possess cubic symmetry of the icosahedral type, with a coat composed of 12 subunits each at the vertex of an icosahedron.