The cyanogen bromide peptides of the apoprotein of low density lipoprotein (ApoB): its molecular weight from a chemical view.

After >95% cleavage of the apoprotein (apoB) of the low density lipoproteins with cyanogen bromide, the peptides produced are shown to be extensively aggregated in sodium dodecyl sulfate. Both high temperature and increased concentration (5%) of the detergent are necessary to shift the aggregated peptides from high molecular weight (>25,000) to lower molecular weight aggregates as seen on sodium dodecyl sulfate polyacrylamide gel electrophoresis. End group analyses of the cyanogen bromide digestion by automated sequencer techniques indicate the presence of five (5) methionines. With a known methionine content of 16 moles/100,000 g protein, the molecular weight of the apoprotein must be approximately 30,000.     

Radioimmunoassay of the link proteins associated with bovine nasal cartilage proteoglycan.

Link proteins from bovine nasal cartilage have been purified by preparative polyacrylamide gel electrophoresis in sodium dodecyl sulfate (Baker, J.R., and Caterson, B. (1979) J. Biol. Chem. 254, 2387-2393) and used to raise antisera in rabbits. A sensitive radioimmunoassay procedure utilizing binding of 125I-labeled antigen . antibody complexes to Protein A of Staphylococcus aureus has served to demonstrate the specificity of the antisera for the link proteins. The lack of reactivity with proteoglycan fractions indicates that link proteins and proteoglycan do not share antigenic determinants. This result is in accord with published cyanogen bromide peptide cleavage data (Baker, J.R., and Caterson B. (1977) Biochem. Biophys. Res. Commun. 77, 1-10) which showed proteoglycan and link protein to be structurally dissimilar. The radioimmunoassay procedure has been used to quantitate small amounts of link protein which remain associated with proteoglycan after purification by equilibrium density gradient centrifugation in 4 M guanidine HCl and by gel chromatography in sodium dodecyl sulfate.     

Sequence homology analysis of a heterogenous protein population by chemical and enzymic digestion using a two-dimensional sodium dodecyl sulfate-polyacrylamide gel system

A procedure for examining possible sequence homology between two or more proteins in a heterogenous protein mixture using a two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis system is described. Three different chemical reagents (cyanogen bromide, hydroxylamine, and acetic acid) and three enzymes (α-chymotrypsin, trypsin, and Staphylococcus aureus protease) have been used as the cleavage reagents for the peptide mapping studies. Potential application of this technique in conjunction with radioactive labeling and immunological studies was also demonstrated.     

Modification of a discontinuous and highly porous sodium dodecyl sulfate-polyacrylamide gel system for minigel electrophoresis

A highly porous and efficient discontinuous sodium dodecyl sulfate-polyacrylamide slab gel electrophoresis system was recently described by J. P. Doucet and J. M. Trifaró [1988) Anal. Biochem. 168, 265-271). The system was developed to separate with high and broad resolution the components from large volume samples after an overnight electrophoresis. This system was found to have many advantages. However, when used directly as a minigel system, this method cannot sustain the high voltage inherent to minigel electrophoresis and produces artefacts, namely a double front and a loss of resolution in the low molecular weight range. These problems were eliminated using the buffer system of M. A. Porzio and A.M. Pearson [1977) Biochem. Biophys. Acta 490, 27-34) in the separating gel and in the electrode chambers. The resulting modified discontinuous minigel system has the same advantages as the technique described for large slab gel electrophoresis, including the effective and rapid transfer of high molecular weight proteins to nitrocellulose membranes, as well as the advantages of the minigel format.     

A simplified method for quantitation of the relative amounts of type I and type III collagen in small tissue samples

A method is described for the quantitation of the relative amounts of types I and III collagens in rabbit lung tissue. This involved (i) repeated homogenization in the presence of 2% sodium dodecyl sulfate and the production of an acetone dried powder, (ii) reaction with cyanogen bromide, (iii) polyacrylamide gel electrophoresis, and (iv) densitometric scanning of proteins stained by Coomassie blue R-250. Several features of this procedure were shown to offer advantages over methods previously employed. First, the sodium dodecyl sulfate solution was shown to remove the bulk of noncollagen proteins leaving an insoluble residue which could then be reacted with cyanogen bromide without further purification. Second, cyanogen bromide was shown to solubilize essentially all of the collagen in the residue leaving an insoluble pellet with an amino acid analysis similar to elastin. Finally, to facilitate accurate quantitation, types I and III collagen standards were included with each gel so that a standard curve of protein versus staining density could be constructed. This method is assessed to be simpler and more accurate than those employed previously for the quantitation of collagens and can be applied to small tissue samples (<100 mg) such as would be obtained by lung biopsy.     

Evidence for a proteolytic modification of liver pyruvate kinase in fasted rats.

Liver pyruvate kinase was purified to homogeneity from rats fed a high carbohydrate, low protein diet (LPK-C) and from rats fasted for 84 h (LPK-F). Although the enzymes have similar electrophoretic mobilities in 7% polyacrylamide disc gels, the specific activity of LPK-C was two to three times the value of the specific activity of LPK-F. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of LPK-C yields a single protein band of 56,000 daltons. In contrast, LPK-F yields two bands of protein. Approximately one-third of the LPK-F has an electrophoretic mobility similar to the 56,000-dalton LPK-C peptide. The remaining two-thirds of the LPK-F protein migrates as a 51,000-dalton peptide. Cyanogen bromide was used to cleave LPK-C and LPK-F. Similar peptide patterns were obtained from LPK-C and LPK-F when the cyanogen bromide fragments were resolved by 12% polyacrylamide gel electrophoresis in 7.5 m urea containing 6 mm Triton X-100 and 5% acetic acid. Separation of the two peptides from LPK-F was accomplished by selective immunologie absorption of the 56,000-dalton peptide with anti-LPK-C gammaglobulin immobilized on Sepharose 4B. Tryptic digests of LPK-C, LPK-F and the 51,000-dalton peptide yield similar peptide patterns when analyzed via sodium dodecyl sulfate-polyacrylamide slab gel electrophoresis. These results suggest that the 51,000-dalton peptide could be derived by a proteolytic cleavage or limited digestion of the 56,000-dalton subunit. Phosphorylation of LPK-C and LPK-F by [γ-³²P]ATP in vitro with cyclic AMP-activated protein kinase results in covalent incorporation of ${}^{32}$P into only the 56,000-dalton subunit. These results suggest that anin vivo proteolytic modification that yields the 51,000-dalton subunit.     

Quantitation of types I and III collagens in human tissue samples and cell culture by cyanogen bromide peptide analysis

A procedure for the quantitation of types I and III collagens by cyanogen bromide peptide analysis was developed with the aim of eliminating certain problems associated with this method. Ion-exchange chromatography reduced high background levels on gel scans used to quantitate the peptides; reduction with beta-mercaptoethanol substantially increased the efficiency of the cyanogen bromide cleavage; use of a concave gradient in acrylamide from 8 to 20% improved the resolution of cyanogen bromide peptides separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis; and a normalization procedure eliminated variations due to differences in the amount of material loaded on the gel system. This method of quantitation was applied to human aorta samples and to collagen secreted by human skin fibroblasts. Metachromasy of type I and type III collagen cyanogen bromide peptides stained with Coomassie blue R-250 was established and this was used as an index of the purity of the cyanogen bromide peptide preparations. Type I and III collagens were prepared from human placental tissue, and these purified collagens were used to construct calibration curves to determine the relationship between the quantity of diagnostic cyanogen bromide peptides present and the composition of the sample in terms of types I and III collagens.     

Applications of chemical cleavage procedures to the peptide mapping of neurofilament triplet protein bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis

A procedure for examining possible sequence homology in the triplet neurofilament proteins using a sodium dodecyl sulfate-polyacrylamide gel electrophoresis system is described. Five different chemical reagents (cyanogen bromide, BNPS-skatole, hydroxylamine, formic acid, and nitrothiocyanobenzoic acid) have been used for peptide mapping studies. Potential applications of this technique are discussed.     

Pouring and Running a Protein Gel by reusing Commercial Cassettes

The evaluation of proteins using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis is a common technique used by biochemistry and molecular biology researchers^1-4. For laboratories that perform daily analyses of proteins, the cost of commercially available polyacrylamide gels (˜$10/gel) can be considerable over time. To mitigate this cost, some researchers prepare their own polyacrylamide gels. Traditional methods of pouring these gels typically utilize specialized equipment and glass gel plates that can be expensive and preclude pouring many gels and storing them for future use. Furthermore, handling of glass plates during cleaning or gel pouring can result in accidental breakage creating a safety hazard, which may preclude their use in undergraduate laboratory classes. Our protocol demonstrates how to pour multiple protein gels simultaneously by recycling Invitrogen Nupage Novex minigel cassettes, and inexpensive materials purchased at a home improvement store. This economical and streamlined method includes a way to store the gels at 4°C for a few weeks. By re-using the plastic gel cassettes from commercially available gels, labs that run frequent protein gels can save significant costs and help the environment. In addition, plastic gel cassettes are extremely resistant to breakage, which makes them ideal for undergraduate laboratory classrooms.     

Chemical analysis of major outer membrane proteins of Neisseria meningitidis: comparison of serotypes 2 and 11

Most of the 15 protein serotypes found in group B Neisseria meningitidis have distinct major outer membrane protein patterns when examined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) by the Weber-Osborn system. Both serotypes 2 and 11 contain major outer membrane proteins with apparent molecular weights of 41,000 and 28,000 (41K and 28K). The 41K and 28K proteins were purified from the prototype strains of these two serotypes (M986 type 2 and M136 type 11) by preparative slab SDS-PAGE and were chemically characterized. No hexosamine was found in the purified 41K and 28K proteins. Although the two 41K proteins had similar amino acid compositions, their mobilities in Laemmli SDS-PAGE and their fragmentation patterns on SDS-PAGE after cyanogen bromide cleavage were different. The two 28K proteins differed in their amino acid composition, mobilities in Laemmli SDS-PAGE, and cyanogen bromide cleavage products. Peptide maps following chymotrypsin digestion of radioiodinated 41K and 28K proteins revealed distinct peptide maps for all four proteins. Comparison of the peptide maps of two 41K or two 28K proteins indicated that most of the unique peptides were hydrophilic, whereas most of the common peptides were hydrophobic. These results indicated that both of the 41K proteins and the 28K proteins from serotypes 2 and 11 were chemically different, although the proteins having the same molecular weights appeared to share common peptides.     

Location of epitopes on Campylobacter jejuni flagella.

Flagella were isolated from strains of Campylobacter jejuni belonging to different heat-labile serogroups and from a strain of Campylobacter fetus, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that the flagellin molecular weights (Mr) were approximately 62,000. The flagellins were cleaved by hydrolysis with cyanogen bromide, and sodium dodecyl sulfate-urea peptide gel electrophoresis showed that the C. jejuni flagellins were structurally similar, and differed from C. fetus flagellin. Immunochemical analysis by Western blotting, enzyme-linked immunosorbent assay, immune electron microscopy, and immunoprecipitation with polyclonal and monoclonal antibodies revealed the presence of both internal and surface-exposed epitopes. The internal epitopes were antigenically cross-reactive and linear, and in the case of C. jejuni flagellin were located on cyanogen bromide peptides of apparent Mr 22,400 and 11,000. Antigenically cross-reactive epitopes were also present on an Mr 43,000 cyanogen bromide peptide of C. fetus flagellin. The Mr 22,400 peptide of C. jejuni VC74 flagellin also carried closely positioned internal linear epitopes for two monoclonal antibodies. One epitope was strain specific, while the other was shared by some but not all Campylobacter flagellins. The flagella of C. jejuni VC74 also displayed both surface-exposed antigenically cross-reactive and surface-exposed serospecific epitopes. Both linear and conformational epitopes contributed to the serospecificity of C. jejuni VC74 flagella, and a linear serospecific epitope was located on a cyanogen bromide peptide of apparent Mr 4,000.     

Qa-2 antigen encoded by Q7b is biochemically indistinguishable from Qa-2 expressed on the surface of C57BL/10 mouse spleen cells

Qa-2 was immunoprecipitated from the surface of 125I-labeled C57BL/10 (B10) mouse spleen cells and compared with Qa-2 immunoprecipitated from the surface of R1.1 thymoma cells transfected with Q7b. Analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that Qa-2 glycoproteins from both of these sources have a relative molecular mass of approximately 37 kDa. After treatment with endoglycosidase F, the Qa-2 polypeptide chains derived from C57BL/10 spleen and Q7b-transfected R1.1 cells displayed identical mobilities in sodium dodecyl sulfate-polyacrylamide gel electrophoresis because of removal of N-linked oligosaccharide residues. Furthermore, treatment of Qa-2 proteins from both sources with cyanogen bromide or alpha-chymotrypsin resulted in identical peptide fragmentation patterns. These results therefore provide a biochemical correlation between a cloned Qa-region gene produce expressed on the surface of transfected cells, and the Qa-2 glycoprotein on spleen cells that was described a decade ago by serologic methods.     

A nonurea electrophoretic gel system for resolution of polypeptides of Mr 2000 to Mr 200,000

A sodium dodecyl sulfate-polyacrylamide gel electrophoresis system which resolves proteins and peptides from Mr 2000 to Mr 200,000 is described. Gradients of polyacrylamide, crosslinker, and glycerol buffered in Tris-phosphate (pH 6.8) are employed. Neither urea nor a stacking gel is required. This system has been used to separate molecules below Mr 3000 which differed by only seven amino acid residues, yet has the capacity to survey masses up to Mr 200,000 on the same gel. Examples are given for separations of myoglobin cyanogen bromide fragments and adrenocorticotropin peptides. Utilizing the same gradient slab gel system in tandem with isoelectric focusing, a two-dimensional separation pattern of mammalian liver cell lysate is shown. A comparison of two different silver stain methods with this system is also given.     

Purification and characterization of bovine tissue factor

Tissue factor (tissue thromboplastin, factor III), an initiator of coagulation, has been purified 142,000-fold to homogeneity from bovine brain. The protein is an integral membrane glycoprotein with an apparent molecular weight of 43,000 as judged by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The apoprotein was first purified by extraction with Triton X-100 and repeated preparative polyacrylamide gel electrophoresis in sodium dodecyl sulfate. Antiserum was produced against a few micrograms of purified apoprotein and was used to construct an immunoadsorbent column. The column was then used for affinity purification of the apoprotein directly from the Triton X-100 extract, thereby significantly increasing the amount of purified protein produced. The purification scheme may be generally useful for the rapid and large scale purification of membrane proteins. Tryptic digestion of the apoprotein in Triton X-100 cleaved a peptide of approximately 3000 daltons without affecting the activity. The activity was recovered directly from stained SDS polyacrylamide gels, and the profile of recovered activity corresponded directly with the stained bands. The activity shifted along with the protein band following tryptic digestion, thus demonstrating that the protein observed on the gels is tissue factor. The coagulant activity of the purified apoprotein was reconstituted by the addition of phospholipid. Optimal activity was observed at phospholipid to protein ratios (w/w) greater than 450:1.     

Biosynthetic incorporation of [3H]ethanolamine into protein synthesis elongation factor 1 alpha reveals a new post-translational protein modification

Biosynthetic incorporation of [3H]ethanolamine into proteins was assessed in the human erythroleukemia cell line K562. A single predominant labeled protein of about 50 kDa was observed following electrophoresis of cell extracts on polyacrylamide gels in the presence of sodium dodecyl sulfate. Subcellular fractionation showed this protein to distribute similarly to a 46-kDa [3H]ethanolamine-labeled protein reported previously (Tisdale, E. J., and Tartakoff, A. M. (1988) J. Biol. Chem. 263, 8244-8252). In particular, the protein was enriched in cytosolic and microsomal fractions relative to plasma membrane and thus did not appear to correspond to the class of proteins with glycoinositol phospholipid anchors, the only post-translational protein modification involving ethanolamine that had been described previously. Two-dimensional polyacrylamide gel analysis involving isoelectric focusing followed by electrophoresis in sodium dodecyl sulfate indicated that the protein was very basic, and nitrocellulose blots of one- and two-dimensional gels subjected to 3H autoradiography and immunostaining with antisera to purified rabbit elongation factor (EF) 1 alpha revealed that the protein was EF-1 alpha. Copurification of rabbit EF-1 alpha and the [3H]ethanolamine-labeled protein from K562 cells further supported this identification. Analysis of tryptic fragments produced from the copurified proteins by reverse-phase high pressure liquid chromatography showed two radiolabeled peptides. Amino acid analysis demonstrated 1 residue of ethanolamine in each peptide, and peptide sequencing revealed that the ethanolamine-containing component(s) was attached to Glu301 and Glu374 in the EF-1 alpha protein sequence deduced from a human EF-1 alpha cDNA. These data confirm a new class of post-translational protein modifications involving ethanolamine.     

Outer membrane proteins of Escherichia coli. II. Heterogeneity of major outer membrane polypeptides

When E. coli outer membrane protein is dissolved in sodium dodecyl sulfate (SDS) solution and boiled briefly, a single major peak (peak B) with a molecular weight of 42,000 daltons is observed on SDS-containing polyacrylamide gels. If the protein is dissolved in SDS solution at 37 °C and applied to gels without further treatment, peak B disappears and two other major peaks appear: Peak A, which is composed of aggregates and migrates more slowly than peak B, and peak C which is composed of monomeric protein not fully reacted with SDS and which migrates faster than peak B. When cyanogen bromide peptides of protein from peak A and peak C were compared, it was evident that peak A and peak C contained entirely different polypeptides. This was further confirmed by differential labeling studies with methionine and leucine. The cyanogen bromide peptide profiles of protein from peak A suggested that this peak was composed of two polypeptides, and this was confirmed by electrophoresis in an alkaline gel system which resolves peak B into three subcomponents. Two of these were derived from peak A and the third was derived from peak C. These results indicate that the outer membrane of E. coli contains at least three nonidentical major polypeptides, each of which has a nearly identical molecular weight of about 42,000 daltons. These polypeptides are present in identical proportions in the soluble and insoluble fractions obtained when the outer membrane is treated with Triton X-100 plus EDTA.     

Cyanogen bromide digestion of the avian myeloblastosis virus pp19 protein: isolation of an amino-terminal peptide that binds to viral RNA.

The avian myeloblastosis virus pp19 protein was separated from the other virus proteins by a rapid and simple purification procedure which yields milligram amounts of homogeneous protein. This protein was then fragmented by digestion with cyanogen bromide. When the mixture of the cyanogen bromide peptides was passed through a 60S avian myeloblastosis virus RNA-cellulose column, only one peptide bound with high affinity to the resin. The peptide migrated on a sodium dodecyl sulfate-polyacrylamide gel with an approximate molecular weight of 2,900 and will be referred to as the p3B peptide. This peptide was also isolated directly by chromatography of the cyanogen bromide-digested pp19 protein on a reverse-phase high-pressure liquid chromatography column. It was again the only cyanogen bromide peptide of the pp19 protein that bound to the RNA affinity resin. The p3B peptide is a basic peptide, as was seen by its rapid migration on acid-urea-polyacrylamide gels and its amino acid composition. A partial amino acid sequence analysis of the p3B peptide indicated that it was derived from the amino terminus of the intact protein. Although the p3B peptide bound to 60S RNA, it did not demonstrate the selective binding of native pp19 to regions of the RNA containing secondary structure.     

Gas-phase sequencing after electroblotting on polyvinylidene difluoride membranes assigns correct molecular weights to myoglobin molecular weight markers

Commercially available polypeptide marker kits containing peptides generated by cyanogen bromide cleavage of either horse heart myoglobin or sperm whale myoglobin have been investigated by sodium dodecyl sulfate - polyacrylamide gel electrophoresis (SDS-PAGE), followed by electroblotting on polyvinylidene difluoride membranes, and gas-phase sequencing. It could be shown that the molecular weights assigned to the SDS-PAGE bands by the companies are incorrect. Arranged in descending order, the marker kits are composed of the following polypeptide fragments from myoglobin: positions 1-153, 1-131, 56-153, 56-131, 1-55, and 132-153. A polypeptide comprising residues 1-14 was not found. According to these results the log Mr versus Rf plot used for calibration must be revised. For the separation of low molecular weight polypeptides and peptides a new gel system based on the theory of multiphasic zone electrophoresis combined with a modified Coomassie staining procedure is reported.     

Purification and partial characterization of the type II procollagen synthesized by embryonic cartilage cells

Matrix-free cells were prepared from sternal cartilages of 17-day-old chick embryos, and procollagen synthesized and secreted by the cells was isolated by ion exchange chromatography on carboxymethyl cellulose and by gel filtration. The isolated protein was homogeneous by polyacrylamide gel electrophoresis in sodium dodecyl sulfate and it appeared to consist of identical pro-α chains linked by interchain disulfide bonds. Amino acid analysis and cyanogen bromide peptide mapping of the purified procollagen demonstrated that it had structures similar to Type II collagen. The amino acid composition was also consistent with the conclusion that the peptide extensions on the pro-α chains of procollagen contained amino acid sequences not found in the collagen portion of the molecule. Segment-long-spacing aggregates were prepared from the procollagen, and aggregates demonstrated the same banding pattern as is found in segment-long-spacing aggregates prepared from Type II collagen. The segment-long-spacing aggregates from procollagen revealed, however, the presence of NH₂-terminal extensions of about 150 Å in length. In addition, the procollagen molecules contained irregularly shaped, large extension peptides at the COOH-terminal end of the molecule.     

Structural characterization of recombinant hepatitis B surface antigen protein by mass spectrometry

The primary structure of recombinant hepatitis B surface antigen protein produced in yeast has been confirmed by mass spectrometric peptide mapping. These studies corroborate more than 85% of the amino acid sequence derived by sequencing of the gene and identified the presence of an acetyl moiety on approximately 70% of the NH2-terminal methionine residues. Prior to the present work, direct structural analysis was largely prevented by the insolubility of this integral membrane protein and its primary degradation fragments in aqueous buffers and by partial blockage of the NH2 terminus. These difficulties were overcome by preparative isolation using electroelution of the monomeric 226 amino acid protein from a polyacrylamide electrophoretic gel in the presence of sodium dodecyl sulfate. Chymotryptic digestion of the reduced and carboxymethylated monomer produced a large number of small, predominantly hydrophobic peptides ideally suited for peptide mapping by fast atom bombardment mass spectrometry. The percentage of NH2-terminal methionine blocked by acetyl was determined by a new strategy involving cyanogen bromide cleavage, permethylation, and gas chromatography/mass spectrometry identification and quantitation of the N-methyl-N-acetylhomoserine produced.