Comparative toxicology of borates

Inorganic borates, including boric acid, Na, ammonium, K, and Zn borates generally display low acute toxicity orally, dermally, and by inhalation. They are either not irritant or mild skin and eye irritants. Exceptions owing to physiochemical properties do occur. Longer-term toxicological studies have been reported mainly on boric acid or borax where the properties are generally similar on an equivalent boron (B) basis. The critical effects in several species are male reproductive toxicity and developmental toxicity. The doses that cause these effects are far higher than any levels to which the human population could be exposed. Humans would need to consume daily some 3.3 g of boric acid (or 5.0 g borax) to ingest the same dose level as the lowest animal NOAEL. No effects on fertility were seen in a population of workers exposed to borates or to a population exposed to high environmental borate levels. There is remarkable similarity in the toxicological effects of boric acid and borax across different species. Other inorganic borates that simply dissociate to boric acid are expected to display similar toxicity, whereas those that do not dissociate simply to boric acid may display a different toxicological profile.     

Borate and boric acid supplementation of drinking water alters teeth and bone mineral density and composition differently in rabbits fed a high protein and energy diet

The reported beneficial effects of boron on mineralized tissues in animals and humans vary. Thus, a study was performed to assess whether the variability was the result of different forms of boron supplementation, method of supplementation, and increased adiposity of the rabbit experimental model.Thirty-one female New Zealand White rabbits, (aged 8 months, 2–2.5 kg weight) were fed a grain-based high energy diet containing 11.76 MJ/kg (2850 kcal/kg) and 3.88 mg boron/kg. The rabbits were randomly divided into four treatment groups: Control group was not supplemented with boron (n:7; C), and three groups supplemented with 30 mg boron/L in drinking water in the forms of borax decahydrate (Na2O4B7 10H2O, n:10; BD), borax anhydrous (Na2O4B7, n:7; Bah) or boric acid (H2BO3, n:7; BA). Cone beam micro computed tomographic (micro-CT), histological and elemental analysis was used to evaluate the bones/teeth.Results of the experiments demonstrated that boron supplementation had beneficial effects on mineralized tissue but varied with the type of treatment. Mineral density of the femur was increased by the Bah and BA treatments (p < 0.001), but only BA increased mineral density in the tibia (p = 0.015). In incisor teeth, mineral density of dentin was increased by all boron treatments (p < 0.001), and mineral density of enamel was increased by the BD and Bah treatments. Mineral analysis found that all boron treatments increased the boron concentration in tibia and femur. In the tibia, both the BD and Bah treatments decreased the iron concentration, and the BD treatment decreased the magnesium concentration. Sodium and zinc concentrations in the tibia were decreased by the Bah and BA treatments. The boron treatments did not significantly affect the calcium, copper, molybdenum, potassium phosphorus, and sulfur concentrations.The findings show that boron supplementation can have beneficial effects on mineralized tissues in an animal model with increased adiposity, which is a model of increased inflammatory stress. However, this effect varies with the form of boron supplemented, the method of supplementation, and the mineralized tissue examined.     

A combined X-ray and NMR study of borate esters of furanoidic cis-1,2-diols

Crystals of K[B(AnErytH(-2)2] x 2 H2O (AnEryt = 1,4-anhydroerythritol) form from aqueous alkaline solutions containing a double molar amount of diol over borate. The spiro-type monoanions are the main borate species in the mother liquors of crystallisation according to 11B and 13C NMR spectroscopy. Ribofuranosides form analogous borate esters using their 1,4-anhydroerythritol core. Crystals of Na[B(Me beta-D-Ribf 2,3H(-2))2] x 2 H2O were grown from alkaline methyl beta-D-ribofuranoside solutions that had attacked boron-containing Duran vessels. NMR spectra show closely resembling borate-ester speciation in solutions of diols with the 1,4-anhydroerythritol core--1,4-anhydroerythritol itself, methyl beta-D-ribofuranoside and guanosine.     

Structural transitions of deoxyribonucleic acid in aqueous electrolyte solutions. II. The role of hydration.

The data and approach reported in paper I (Hanlon et al., 1975, preceding paper) have been used to calculate the fractional changes in secondary structure of calf thymus deoxyribonucleic acid which occur in aqueous solutions as a function of the concentration of NaCl, KCl, LiCl, CsCl, and NH4Cl. There is a continuous loss in the "B" character of the nucleic acid with concomitant production of the C and, in some instances, an A form, as well, as the salt concentration increases. Sedimentation velocity studies suggest that there is an accompanying change in the hydrodynamic characteristics of the DNA molecules, as well. Utilizing the existing hydration data in the literature (Hearst and Vinograd, 1961a,b; Hearst, 1965; Tunis and Hearst, 1968a; Cohen and Eisenberg, 1968; Falk et al., 1962, 1963a,b), we have found that a gradual loss of "B" character and a decrease in the frictional coefficient of DNA occur as the net hydration of DNA is reduced from the fully hydrated from (60-80 mol of H2O/mol of nucleotide) to values of ca. 12-14 mol of H2O/mol of nucleotide. Below that value, a more precipitous decrease in these properties occurs. Extrapolation of the linear relationship observed between the fractional B content and the net hydration in the latter regions yield values of ca. 18 mol of H2O/mol of nucleotide at 100% B and ca. 4 mol of H2O/mol of nucleotide at 0% B (i.e., 100% C or C + A) for the alkali metal salts of DNA. The ammonium salt retains somewhat more H2O in the C and A forms (ca. 7). These results together with the hydration site assignments of Falk et al. (1962, 1963a,b) are interpreted in terms of a hydration model for DNA in aqueous solution in which an intact primary hydration shell of ca. 18 mol of H2O/mol of nucleotide is required for the maintenance of the "B" conformation. Removal of all but those water molecules solvating the phosphate groups results in the conversion to the C forms, predominantly, with a small amount of A structure formed as well in some salts. The accompanying changes in the sedimentation coefficients suggest that the DNA molecule assumes a more compact and/or flexible form under these conditions in which it is mainly in the C and A structures. The combination of these two events which ensue upon dehydration create a polymeric structure which can be more easily packaged in biological systems.     

硼类化合物在滴眼剂中抑菌效力的探讨

探讨硼类化合物(硼酸、硼砂)在滴眼剂中的抑菌效力。通过实验设计不同浓度的硼酸、硼砂供试品组,测定其抑菌效力。结果表明,在牛磺酸滴眼剂品种中,3组供试品组对真菌组达到抑菌效力的判断标准。但在细菌组中,3组供试品组未达到抑菌效力判断标准。在氯霉素滴眼剂中,白色念珠菌98001、金黄色葡萄球菌26003、铜绿假单胞菌10104组均满足抑菌效力的判断标准,但对大肠埃希菌44102未体现出明显抑菌作用。硼类化合物(硼酸、硼砂)在1 mg/m L剂量下即具有一定的抑菌效力。因此在滴眼剂处方设计时,硼类化合物抑菌效力需被正视,同时需结合配伍注意控制使用剂量。     

In vivo percutaneous absorption of boron as boric acid, borax, and disodium octaborate tetrahydrate in humans: a summary

Literature from the first half of this century reports concern for toxicity from topical use of boric acid, but assessment of percutaneous absorption has been impaired by lack of analytical sensitivity. Analytical methods in this study included inductively coupled plasma-mass spectrometry, which now allows quantitation of percutaneous absorption of 10B in 10B-enriched boric acid, borax, and disodium octaborate tetrahydrate (DOT) in biological matrices. This made it possible, in the presence of comparatively large natural dietary boron intakes for the in vivo segment of this study, to quantify the boron passing through skin. Human volunteers were dosed with 10B-enriched boric acid, 5.0%, borax, 5.0%, or disodium octaborate tetrahydrate, 10% in aqueous solutions. Urinalysis, for boron and changes in boron isotope ratios, was used to measure absorption. Boric acid in vivo percutaneous absorption was 0.226 (SD = 0.125) mean percent dose, with flux and permeability constant (Kp) calculated at 0.009 microg/cm2/h and 1.9 x 10(-7) cm/h, respectively. Borax absorption was 0.210 (SD = 0.194) mean percent dose, with flux and Kp calculated at 0.009 microg/cm2/h and 1.8 x 10(-7) cm/h, respectively. DOT absorption was 0.122 (SD = 0.108) mean percent, with flux and Kp calculated at 0.01 microg/cm2/h and 1.0 x 10(-7) cm/h, respectively. Pretreatment with the potential skin irritant 2% sodium lauryl sulfate had no effect on boron skin absorption. These in vivo results show that percutaneous absorption of boron, as boric acid, borax, and disodium octaborate tetrahydrate, through intact human skin is low and is significantly less than the average daily dietary intake. This very low boron skin absorption makes it apparent that, for the borates tested, the use of gloves to prevent systemic uptake is unnecessary. These findings do not apply to abraded or otherwise damaged skin.     

Inner-sphere complexes of divalent cations with single-stranded poly(rA) and poly(rU)

A combination of ultrasound velocimetry, density, and UV spectroscopy has been employed to study the hydration effects of binding of Mn(2+) and alkaline-earth cations to poly(rA) and poly(rU) single strands. The hydration effects, obtained from volume and compressibility measurements, are positive due to overlapping the hydration shells of interacting molecules and consequently releasing the water molecules to bulk state. The volume effects of the binding to poly(rA), calculated per mole of cations, range from 30.6 to 40.6 cm(3) mol(-1) and the compressibility effects range from 59.2 x 10(-4) to 73.6 x 10(-4) cm(3) mol(-1) bar(-1). The volume and compressibility effects for poly(rU) are approximately 17 cm(3) mol(-1) and approximately 50 x 10(-4) cm(3) mol(-1) bar(-1), respectively. The comparative analysis of the dehydration effects suggests that the divalent cations bind to the polynucleotides in inner-sphere manner. In the case of poly(rU) the dehydration effects correspond to two direct coordination, probably between adjacent phosphate groups. The optical study did not reveal any effects of cation on the secondary structure or aggregation of poly(rU). In the case of single-helical poly(rA) binding is more specific: dehydration effects correspond to three to five direct contacts and must involve atomic groups of adenines, and the divalent cations stabilize and aggregate the polynucleotide.     

Toxicity and repellency of borate-sucrose water baits to Argentine ants (Hymenoptera: Formicidae)

The oral toxicity of boron compounds to the Argentine ant, Linepithema humile (Mayr), was evaluated in laboratory tests. The ants were provided 25% sucrose water containing 0.5 and 1% boric acid, disodium octaborate tetrahydrate, and borax. Lethal times of these solutions were a function of the concentration of boron. In field tests, the ants showed no discrimination between disodium octaborate tetrahydrate and boric acid. There was a significant reduction in consumption of sucrose water with > 1% boric acid.     

Effect of carboxylate and Na ions on the tautomeric status of 9-methylguanine

Interactions of 9-methylguanine (m9Gua) with carboxylate ion of acetic acid (CH3COO-) and Na+ were studied by 1H NMR spectroscopy and ab initio quantum chemical calculations of the B3LYP/6-31++G(d,p) and B3LYP/6-311++G(d,p) levels of theory. Changes in the m9Gua 1H NMR spectrum in the presence of the equimolar amount of sodium acetate (NaAc), which in anhydrous DMSO dissociates to CH3COO- and Na+, were interpreted as a consequence of a complex formation of m9Gua in the amino-keto-N1H tautomeric form (m9GuaN1H) with carboxylate ions via two H-bonds involving amino and N1H-imino protons. Quantum chemical calculations of interactions of the m9GuaN1H ground-state tautomer and the m9GuaN3H high energy one with relative energy 20.01 kcal/mol show that the ground state tautomer forms the ground-state complex CH3COO-:mgGuaN1H, by 5.57 kcal/mol more stable than the CH3COO-:m9GuaN3H complex, and coordination of Na+ with the O6 and N7 atoms reduces this energy difference to 2.57 kcal/mol. Such a coordination of Na+ with tautomer m9GuaN3H therewith decreases its relative energy only to 13.31 kcal/mol. Non-additivity of the two ligands contributions to the 8-times reduction of the relative energy of the high energy tautomer in the CH3COO-:m9GuaN3H:Na+(O6,N7) triple complex was concluded, the role of CH3COO- being dominant. Besides, coordination with Na+ resulted in an iminoproton transfer from the base to CH3COO- in the triple complexes of both tautomers, according to calculations in vacuum. Biological significance of the results is noticed.     

Is Boron a Prebiotic Element? A Mini-review of the Essentiality of Boron for the Appearance of Life on Earth

Boron is probably a prebiotic element with special importance in the so-called "sugars world". Boron is not present on Earth in its elemental form. It is found only in compounds, e.g., borax, boric acid, kernite, ulexite, colemanite and other borates. Volcanic spring waters sometimes contain boron-based acids (e.g., boric, metaboric, tetraboric and pyroboric acid). Borates influence the formation of ribofuranose from formaldehyde that feeds the "prebiotic metabolic cycle". The importance of boron in the living world is strongly related to its implications in the prebiotic origins of genetic material; consequently, we believe that throughout the evolution of life, the primary role of boron has been to provide thermal and chemical stability in hostile environments. The complexation of boric acid and borates with organic cis-diols remains the most probable chemical mechanism for the role of this element in the evolution of the living world. Because borates can stabilize ribose and form borate ester nucleotides, boron may have provided an essential contribution to the "pre-RNA world".     

Effects of flame retardants on the properties of particle boards prepared from cottonseed hulls

The effects of fire retardants on the properties of particle boards made from cottonseed hulls were studied. The boards were treated with (1) 70% borax + 30% boric acid (FR(1)); (2) 60% borax + 25% boric acid + 15% ammonium dihydrogen orthophosphate (FR(2)) and were evaluated for duration of flaming, after-glow, charred area, charred length and per cent loss in weight, along with physico-mechanical properties. Fire retardant properties, water resistance and per cent thickness swelling improved, and bending strength decreased, with increase in concentration of fire retardants. Treatment (2) was found to be the better fire retardants since it served the dual purposes of flame and glow retardation.     

选择性化学萃取对自然水体生物膜上微生物的影响

用平板计数法、显微镜直接计数法及培养法分别研究了选择性萃取剂对自然水体生物膜上细菌、原生动物和藻类的影响.结果表明,随着选择性萃取剂萃取能力的增强,生物膜上存活下来的微生物数量呈减少趋势.经001 mol·L^-1 NH₂OH·HCl+0.01 mol·L^-1 HNO₃、0.4 mol·L^-1 Na₂S₂O₄ (pH 6.0)和0.2 mol·L^-1草酸氨(pH 4.0)萃取后存活的微生物总量分别下降到原膜的27.6%、14.1%和0.01%;经15% HNO₃萃取后,膜上只有极少数的细菌存活;而经H₂O₂/HNO₃萃取后则无细菌存活、原生动物和藻类存活,说明选择性化学萃取剂的使用影响生物膜的活性.比较萃取前后生物膜吸附痕量重金属的能力发现,随着生物膜上微生物数量的减少,生物膜吸附痕量重金属的能力逐渐降低.     

Boron transport mechanisms: collaboration of channels and transporters

Boron (B) is an essential element for plants, but is also toxic when present in excess. B deficiency and toxicity are both major agricultural problems worldwide, and elucidating the molecular mechanisms of B transport should allow us to develop technology to alleviate B deficiency and toxicity problems. Recent milestones include the identification of a boric acid channel, NIP5;1, and a boric acid/borate exporter, BOR1, from Arabidopsis thaliana. Both proteins were shown to be required for plant growth under B limitation. In addition, BOR1 homologs are required for B homeostasis in mammalian cells and B-toxicity tolerance in yeast and plants. Here, we discuss how transgenic approaches show promise for generating crops that are tolerant of B deficiency and toxicity.     

Amperometric detection of perphenazine at a carbon fiber micro-disk bundle electrode by capillary zone electrophoresis

A simple method for determination of perphenazine by capillary zone electrophoresis with amperometric detection is described. The optimum conditions of separation and detection are 1.50 x 10(-3) mol/l Na(2)B(4)O(7)-1.0 x 10(-3) mol/l NaOH (pH 9.9) for the buffer solution, 18 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, and 0.80 V versus saturated calomel electrode for the detection potential, respectively. The limit of detection is 5.0 x 10(-8) mol/l or 44 amol (S/N=3). The linear range of the calibration curve is 1.00 x 10(-7) to 1.00 x 10(-4) mol/l. The relative standard deviation is 1.5% for the migration time and 2.9% for the electrophoretic current at peak maximum. The method is applied to the determination of perphenazine in human urine.     

Fire resistance of Douglas fir (Pseudotsuga menzieesi) treated with borates and natural extractives

The objective of this study was to determine fire resistance of Douglas fir (Pseudotsuga menzieesi (Mirb.) Franco) specimens treated with borate supplemented aqueous solutions of brutia pine bark powder, acorn powder, sumach leaf powder, and gall-nut powder. Boric acid (BA) and borax (BX) were used as borates which are the most commonly used fire retardants in wood preservation industry. Natural extractives (brutia pine bark powder, sumach leaf powder, acorn powder, and gall-nut powder) were also used which have toxic efficiency against insects and fungi due to their tannin contents. A commercial treatment compound Tanalith-CBC (copper-borate-chromate), which is an impregnation chemical, is used for comparison. The fire test method was performed in three stages: flame stage, without flame stage, and glowing stage. Results indicated that the lowest temperature for flame stage, without flame stage, and glowing stage were obtained for specimens treated with BA and BX mixture (7:3; weight:weight). The lowest mass loss was found for the specimens treated with a mixture of BA and BX. Natural extractives did not improve fire resistance of the samples. However, boric acid and borax had excellent fire retardant effectiveness over untreated and treated samples with natural extractives.     

The plant cell wall polysaccharide rhamnogalacturonan II self-assembles into a covalently cross-linked dimer

The location of the 1:2 borate-diol ester cross-link in the dimer of the plant cell wall polysaccharide rhamnogalacturonan II (RG-II) has been determined. The ester cross-links the apiofuranosyl residue of the 2-O-methyl-D-xylose-containing side chains in each of the subunits of the dimer. The apiofuranosyl residue in each of the two aceric acid-containing side chains is not esterified. The site of borate esterification is identical in naturally occurring and in in vitro synthesized dimer. Pb2+, La3+, and Ca2+ increase dimer formation in vitro in a concentration- and pH-dependent manner. Pb2+ is the most effective cation. The dimer accounts for 55% of the RG-II when the monomer (0.5 mM) is treated for 5 min at pH 3.5 with boric acid (1 mM) and Pb2+ (0.5 mM); at pH 5 the rate of conversion is somewhat slower. Hg2+ does not increase the rate of dimer formation. A cation's charge density and its ability to form a coordination complex with RG-II, in addition to steric factors, may regulate the rate and stability of dimer formation in vitro. Our data provide evidence that the structure of RG-II itself determines which apiofuranosyl residues are esterified with borate and that in the presence of boric acid and certain cations, two RG-II monomers self-assemble to form a dimer.     

Citric acid production using immobilized conidia of Aspergillus niger TMB 2022

Conidia of Aspergillus niger TMB 2022 were immobilized in calcium alginate for the production of citric acid. A 1-mL conidia suspension containing ca. 2.32 x 10(8) conidia were entrapped into sodium alginate solution in order to prepare 3% Ca-alginate (w/v) gel bead. Immobilized conidia were inoculated into productive medium containing 14% sucrose, 0.25% (NH(4))(2)CO(3), 0.25% KH(2)PO(4), and 0.025% MgSO(4).7H(2)O with addition of 0.06 mg/L CuSO(4).5H(2)O, 0.25 mg/L ZnCl(2), 1.3 mg/L FeCl(3).6H(2)O, pH 3.8, and incubated at 35 degrees C for 13 days by surface culture to produce 61.53 g/L anhydrous citric acid. Under the same conditions with a batchwise culture, it was found that immobilized conidia could maintain a longer period for citric acid production (31 days): over 70 g/L anhydrous citric acid from runs No. 2-4, with the maximum yield for anhydrous citric acid reaching 77.02 g/L for run No. 2. In contrast, free conidia maintained a shorter acid-producing phase, ca. 17 days; the maximum yield for anhydrous citric acid was 71.07 g/L for run No. 2 but dropped quickly as the run number increased.     

Effect of maturation duration on desiccation tolerance in hybrid larch (Larix×leptoeuropaea dengler) somatic embryos

Summary Cotyledonary somatic embryos ofLarix &#x00D7; leptoeuropaea that developed after various maturation times on media containing abscisic acid showed different frequencies of conversion into plants. Drying of these somatic embryos under high relative humidity (RH) before germination improved plantlet recovery and eliminated differences in the performance of somatic embryos matured for different times. However, dehydration of somatic embryos under 98% RH to a water content below that of zygotic embryos excised from mature seeds (0.97 and 1.36 g H₂O/g dry weight, respectively) showed a strong positive correlation between longer maturation time and desiccation tolerance. Drying somatic embryos at 4&#x00B0; C under 59% RH for 1 wk resulted in desiccation to a water content of 0.30 g H₂O/g dry weight, which was the closest to the hydration state of zygotic embryos in dried, stored seeds (0.20 g H₂O/g dry weight). Under this condition, only somatic embryos matured for 5 wk germinated and produced plantlets at a relatively high frequency (73 and 41%, respectively).     

Determination of diterpenoid triepoxides in Tripterygium wilfordii by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatographic (MEKC) method has been established for the identification and determination of diterpenoid triepoxides in the Chinese herb Tripterygium wilfordii Hook F. and its preparations. Studies of the influence of boric acid and borax buffer concentration and pH, and of sodium dodecylsulphate (SDS) concentration have been carried out, and the optimum separation for the triepoxides was achieved using 20 mM boric acid and 10 mM borax with 20 mM SDS as the running buffer. MEKC was found to exhibit good accuracy, precision and repeatability. The sensitivity of the assay was sufficient to monitor the three active components in T. wilfordii and its preparations.