Effect of Calcium Ions on Enteropeptidase Catalysis

The effects of calcium ions on hydrolysis of low molecular weight substrates catalyzed by different forms of enteropeptidase were studied. A method for determining activity of truncated enteropeptidase preparations lacking a secondary trypsinogen binding site and displaying low activity towards trypsinogen was developed using N-alpha-benzyloxycarbonyl-L-lysine thiobenzyl ester (Z-Lys-S-Bzl). The kinetic constants for hydrolysis of this substrate at pH 8.0 and 25 degrees C were determined for natural enteropeptidase (K(m) 59.6 microM, k(cat) 6660 min(-1), k(cat)/K(m) 111 microM(-1) x min(-1)), as well as for enteropeptidase preparation with deleted 118-783 fragment of the heavy chain (K(m) 176.9 microM, k(cat) 6694 min(-1), k(cat)/K(m) 37.84 microM(-1) x min(-1)) and trypsin (K(m) 56.0 microM, k(cat) 8280 min(-1), k(cat)/K(m) 147.86 microM(-1) x min(-1)). It was shown that the enzymes with trypsin-like primary active site display similar hydrolysis efficiency towards Z-Lys-S-Bzl. Calcium ions cause 3-fold activation of hydrolysis of the substrates of general type GD(4)K-X by the natural full-length enteropeptidase. In contrast, the hydrolysis of substrates with one or two Asp/Glu residues at P2-P3 positions is slightly inhibited by Ca2+. In the case of enteropeptidase light chain as well as the enzyme containing the truncated heavy chain (466-800 fragment), the activating effect of calcium ions was not detected for all the studied substrates. The results of hydrolysis experiments with synthetic enteropeptidase substrates GD(4)K-F(NO(2))G, G(5)DK-F(NO(2))G (where F(NO(2)) is p-nitrophenyl-L-phenylalanine residue), and GD(4)K-Nfa (where Nfa is beta-naphthylamide) demonstrate the possibility of regulation of undesired side hydrolysis using natural full-length enteropeptidase for processing chimeric proteins by means of calcium ions.     

Catalytic properties of the PepQ prolidase from Escherichia coli

The PepQ prolidase from Escherichia coli catalyzes the hydrolysis of dipeptide substrates with a proline residue at the C-terminus. The pepQ gene has been cloned, overexpressed, and the enzyme purified to homogeneity. The k(cat) and k(cat)/K(m) values for the hydrolysis of Met-Pro are 109 s(-1) and 8.4 x 10(5)M(-1)s(-1), respectively. The enzyme also catalyzes the stereoselective hydrolysis of organophosphate triesters and organophosphonate diesters. A series of 16 organophosphate triesters with a p-nitrophenyl leaving group were assessed as substrates for PepQ. The S(P)-enantiomer of methyl phenyl p-nitrophenyl phosphate was hydrolyzed with a k(cat) of 36 min(-1) and a k(cat)/K(m) of 710 M(-1)s(-1). The corresponding R(P)-enantiomer was hydrolyzed more slowly with a k(cat) of 0.4 min(-1) and a k(cat)/K(m) of 11 M(-1)s(-1). The PepQ prolidase can be utilized for the kinetic resolution of racemic phosphate esters. The PepQ prolidase was shown to hydrolyze the p-nitrophenyl analogs of the nerve agents GB (sarin), GD (soman), GF, and VX.     

The inhibition of metallo-beta-lactamase by thioxo-cephalosporin derivatives

The 8-thioxocephalosporins are poor substrates for the B. cereus metallo beta-lactamase (k(cat)/K(m)=61.4M(-1) s(-1)) and act as weak competitive inhibitors (K(i) approximately 700 microM). The hydrolysis product of thioxocephalosporin, a thioacid, also inhibits the enzyme competitively with a K(i)=96 microM, whereas the cyclic thioxo-piperazinedione, formed by intramolecular aminolysis of thioxocephalexin has a K(i) of 29 microM.     

pH dependence and solvent deuterium oxide kinetic isotope effects on Bacillus cereus beta-lactamase I catalyzed reactions

The solvent kinetic isotope effects (SKIE's) on k(cat) (D(V)) and on k(cat/Km[D(V/K)] were determined for the Bacillus cereus beta-lactamase I catalyzed hydrolysis of five substrates that have values of k(cat)/K(m) varying over the range (0.014-46.3) X 10(6)M(-1) s(-1) and of k(cat) between 0.5 and 2019 s(-1). The variation of D(V/K) was only from 1.06 to 1.25 among these compounds and that in D(V) was from 1.50 to 2.16. These results require that Dk(1), the SKIE on the enzyme-substrate association rate constant, and D(k-1/k2), that on the partition ratio of the ES complex, both be near 1. The larger SKIE observed on D(V) requires that an exchangeable proton be in flight for either or both the acylation and the deacylation reaction. The pH dependence of the values k(cat)/K(m) for three substrates shows identical pK(a)s of 5.5. and 8.4. This identity combined with the fact that only one of these three substrates is kinetically "sticky" proves that the substrates can combine productively with only one protonic form of the enzyme. There is considerable substrate variation in the pK(a) values of k(cat) observed vs. pH profiles; the inflection points for all substrates studied are at pH values more extreme than are observed in the pH profiles for k(cat)/K(m).     

Examining thrombin hydrolysis of the factor XIII activation peptide segment leads to a proposal for explaining the cardioprotective effects observed with the factor XIII V34L mutation

In the blood coagulation cascade, thrombin cleaves fibrinopeptides A and B from fibrinogen revealing sites for fibrin polymerization that lead to insoluble clot formation. Factor XIII stabilizes this clot by catalyzing the formation of intermolecular cross-links in the fibrin network. Thrombin activates the Factor XIII a(2) dimer by cleaving the Factor XIII activation peptide segment at the Arg(37)-Gly(38) peptide bond. Using a high performance liquid chromatography assay, the kinetic constants K(m), k(cat), and k(cat)/K(m) were determined for thrombin hydrolysis of fibrinogen Aalpha-(7-20), Factor XIII activation peptide-(28-41), and Factor XIII activation peptide-(28-41) with a Val(34) to Leu substitution. This Val to Leu mutation has been correlated with protection from myocardial infarction. In the absence of fibrin, the Factor XIII activation peptide-(28-41) exhibits a 10-fold lower k(cat)/K(m) value than fibrinogen Aalpha-(7-20). With the Factor XIII V34L mutation, decreases in K(m) and increases in k(cat) produce a 6-fold increase in k(cat)/K(m) relative to the wild-type Factor XIII sequence. A review of the x-ray crystal structures of known substrates and inhibitors of thrombin leads to a hypothesis that the new Leu generates a peptide with more extensive interactions with the surface of thrombin. As a result, the Factor XIII V34L is proposed to be susceptible to wasteful conversion of zymogen to activated enzyme. Premature depletion may provide cardioprotective effects.     

Development of intramolecularly quenched fluorescent peptides as substrates of angiotensin-converting enzyme 2

Angiotensin-converting enzyme 2 (ACE2 or ACEH) is a novel angiotensin-converting enzyme-related carboxypeptidase that cleaves a single amino acid from angiotensin I, des-Arg bradykinin, and many other bioactive peptides. Using des-Arg bradykinin as a template, we designed a series of intramolecularly quenched fluorogenic peptide substrates for ACE2. The general structure of the substrates was F-X-Q, in which F was the fluorescent group, Abz, Q was the quenching group (either Phe(NO(2)) or Tyr(NO(2))), and X was the intervening peptide. These substrates were selectively cleaved by recombinant human ACE2, as shown by MS and HPLC. Quenching efficiency increased as the peptide sequence was shortened from 8 to 3 aa, and also when Tyr(NO(2)) was used as a quenching group instead of Phe(NO(2)). Two of the optimized substrates, TBC5180 and TBC5182, produced a signal:noise ratio of better than 20 when hydrolyzed by ACE2. Kinetic measurements with ACE2 were as follows: TBC5180, K(m)=58 microM and k(cat)/K(m)=1.3x10(5)M(-1)s(-1); TBC5182, K(m)=23 microM and k(cat)/K(m)=3.5 x 10(4)M(-1)s(-1). Thus, based on hydrolysis rate, TBC5180 was a better substrate than TBC5182. However, TBC5180 was also hydrolyzed by ACE, whereas TBC5182 was not cleaved, suggesting that TBC5182 was a selective for ACE2. We conclude that these two peptides can be used as fluorescent substrates for high-throughput screening for selective inhibitors of ACE2 enzyme.     

Hydrolysis of biological peptides by human angiotensin-converting enzyme-related carboxypeptidase

Human angiotensin-converting enzyme-related carboxypeptidase (ACE2) is a zinc metalloprotease whose closest homolog is angiotensin I-converting enzyme. To begin to elucidate the physiological role of ACE2, ACE2 was purified, and its catalytic activity was characterized. ACE2 proteolytic activity has a pH optimum of 6.5 and is enhanced by monovalent anions, which is consistent with the activity of ACE. ACE2 activity is increased approximately 10-fold by Cl(-) and F(-) but is unaffected by Br(-). ACE2 was screened for hydrolytic activity against a panel of 126 biological peptides, using liquid chromatography-mass spectrometry detection. Eleven of the peptides were hydrolyzed by ACE2, and in each case, the proteolytic activity resulted in removal of the C-terminal residue only. ACE2 hydrolyzes three of the peptides with high catalytic efficiency: angiotensin II () (k(cat)/K(m) = 1.9 x 10(6) m(-1) s(-1)), apelin-13 (k(cat)/K(m) = 2.1 x 10(6) m(-1) s(-1)), and dynorphin A 1-13 (k(cat)/K(m) = 3.1 x 10(6) m(-1) s(-1)). The ACE2 catalytic efficiency is 400-fold higher with angiotensin II () as a substrate than with angiotensin I (). ACE2 also efficiently hydrolyzes des-Arg(9)-bradykinin (k(cat)/K(m) = 1.3 x 10(5) m(-1) s(-1)), but it does not hydrolyze bradykinin. An alignment of the ACE2 peptide substrates reveals a consensus sequence of: Pro-X((1-3 residues))-Pro-Hydrophobic, where hydrolysis occurs between proline and the hydrophobic amino acid.     

Mechanism of Thermoanaerobacterium saccharolyticum beta-xylosidase: kinetic studies

The catalytic mechanism of Thermoanaerobacterium saccharolyticum beta-xylosidase (XynB) from family 39 of glycoside hydrolases has been subjected to a detailed kinetic investigation using a range of substrates. The enzyme exhibits a bell-shaped pH dependence of k(cat)/K(m), reflecting apparent pK(a) values of 4.1 and 6.8. The k(cat) and k(cat)/K(m) values for a series of aryl xylosides have been measured and used to construct two Br?nsted plots. The plot of log(k(cat)/K(m)) against the pK(a) of the leaving group reveals a significant correlation (beta(lg) = -0.97, r(2) = 0.94, n = 8), indicating that fission of the glycosidic bond is significantly advanced in the transition state leading to the formation of the xylosyl-enzyme intermediate. The large negative value of the slope indicates that there is relatively little proton donation to the glycosidic oxygen in the transition state. A biphasic, concave-downward plot of log(k(cat)) against pK(a) provides good evidence for a two-step double-displacement mechanism involving a glycosyl-enzyme intermediate. For activated leaving groups (pK(a) < 9), the breakdown of the xylosyl-enzyme intermediate is the rate-determining step, as indicated by the absence of any effect of the pK(a) of the leaving group on log(k(cat)) (beta(lg) approximately 0). However, a strong dependence of the first-order rate constant on the pK(a) value of relatively poor leaving groups (pK(a) > 9) suggests that the xylosylation step is rate-determining for these substrates. Support for the dexylosylation chemical step being rate-determining for activated substrates comes from nucleophilic competition experiments in which addition of dithiothreitol results in an increase in turnover rates. Normal secondary alpha-deuterium kinetic isotope effects ((alpha-D)(V) or (alpha-D)(V/K) = 1.08-1.10) for three different substrates of widely varying pK(a) value (5.15-9.95) have been measured and these reveal that the transition states leading to the formation and breakdown of the intermediate are similar and both steps involve rehybridization of C1 from sp(3) to sp(2). These results are consistent only with "exploded" transition states, in which the saccharide moiety bears considerable positive charge, and the intermediate is a covalent acylal-ester where C1 is sp(3) hybridized.     

Biochemical evidence for an editing role of thioesterase II in the biosynthesis of the polyketide pikromycin

The pikromycin biosynthetic gene cluster contains the pikAV gene encoding a type II thioesterase (TEII). TEII is not responsible for polyketide termination and cyclization, and its biosynthetic role has been unclear. During polyketide biosynthesis, extender units such as methylmalonyl acyl carrier protein (ACP) may prematurely decarboxylate to generate the corresponding acyl-ACP, which cannot be used as a substrate in the condensing reaction by the corresponding ketosynthase domain, rendering the polyketide synthase module inactive. It has been proposed that TEII may serve as an "editing" enzyme and reactivate these modules by removing acyl moieties attached to ACP domains. Using a purified recombinant TEII we have tested this hypothesis by using in vitro enzyme assays and a range of acyl-ACP, malonyl-ACP, and methylmalonyl-ACP substrates derived from either PikAIII or the loading didomain of DEBS1 (6-deoxyerythronolide B synthase; AT(L)-ACP(L)). The pikromycin TEII exhibited high K(m) values (>100 microm) with all substrates and no apparent ACP specificity, catalyzing cleavage of methylmalonyl-ACP from both AT(L)-ACP(L) (k(cat)/K(m) 3.3 +/- 1.1 m(-1) s(-1)) and PikAIII (k(cat)/K(m) 2.9 +/- 0.9 m(-1) s(-1)). The TEII exhibited some acyl-group specificity, catalyzing hydrolysis of propionyl (k(cat)/K(m) 15.8 +/- 1.8 m(-1) s(-1)) and butyryl (k(cat)/K(m) 17.5 +/- 2.1 m(-1) s(-1)) derivatives of AT(L)-ACP(L) faster than acetyl (k(cat)/K(m) 4.9 +/- 0.7 m(-1) s(-1)), malonyl (k(cat)/K(m) 3.9 +/- 0.5 m(-1) s(-1)), or methylmalonyl derivatives. PikAIV containing a TEI domain catalyzed cleavage of propionyl derivative of AT(L)-ACP(L) at a dramatically lower rate than TEII. These results provide the first unequivocal in vitro evidence that TEII can hydrolyze acyl-ACP thioesters and a model for the action of TEII in which the enzyme remains primarily dissociated from the polyketide synthase, preferentially removing aberrant acyl-ACP species with long half-lives. The lack of rigorous substrate specificity for TEII may explain the surprising observation that high level expression of the protein in Streptomyces venezuelae leads to significant (>50%) titer decreases.     

Mechanistic analyses of catalysis in human pancreatic alpha-amylase: detailed kinetic and structural studies of mutants of three conserved carboxylic acids

The roles of three conserved active site carboxylic acids (D197, E233, and D300) in the catalytic mechanism of human pancreatic alpha-amylase (HPA) were studied by utilizing site-directed mutagenesis in combination with structural and kinetic analyses of the resultant enzymes. All three residues were mutated to both alanine and the respective amide, and a double alanine mutant (E233A/D300A) was also generated. Structural analyses demonstrated that there were no significant differences in global fold for the mutant enzymes. Kinetic analyses were performed on the mutants, utilizing a range of substrates. All results suggested that D197 was the nucleophile, as virtually all activity (>10(5)-fold decrease in k(cat) values) was lost for the enzymes mutated at this position when assayed with several substrates. The significantly greater second-order rate constant of E233 mutants on "activated" substrates (k(cat)/K(m) value for alpha-maltotriosyl fluoride = 15 s(-)(1) mM(-)(1)) compared with "unactivated" substrates (k(cat)/K(m) value for maltopentaose = 0.0030 s(-)(1) mM(-)(1)) strongly suggested that E233 is the general acid catalyst, as did the pH-activity profiles. Transglycosylation was favored over hydrolysis for the reactions of several of the enzymes mutated at D300. At the least, this suggests an overall impairment of the catalytic mechanism where the reaction then proceeds using the better acceptor (oligosaccharide instead of water). This may also suggest that D300 plays a crucial role in enzymic interactions with the nucleophilic water during the hydrolysis of the glycosidic bond.     

Synthesis and hydrolysis by cysteine and serine proteases of short internally quenched fluorogenic peptides

We developed sensitive substrates for cysteine proteases and specific substrates for serine proteases based on short internally quenched fluorescent peptides, Abz-F-R-X-EDDnp, where Abz (ortho-aminobenzoic acid) is the fluorescent donor, EDDnp [N-(ethylenediamine)-2,4-dinitrophenyl amide] is the fluorescent quencher, and X are natural amino acids. This series of peptides is compared to the commercially available Z-F-R-MCA, where Abz and X replace carbobenzoxy (Z) and methyl-7-aminocoumarin amide (MCA), respectively; and EDDnp can be considered a P(2)' residue. Whereas MCA is the fluorescent probe and cannot be modified, in the series Abz-F-R-X-EDDnp the amino acids X give the choice of matching the specificity of the S(1)' enzyme subsite, increasing the substrate specificity for a particular protease. All Abz-F-R-X-EDDnp synthesized peptides (for X = Phe, Leu, Ile, Ala, Pro, Gln, Ser, Lys, and Arg) were assayed with papain, human cathepsin L and B, trypsin, human plasma, and tissue kallikrein. Abz-F-R-L-EDDnp was the best substrate for papain and Abz-F-R-R-EDDnp or Abz-F-R-A-EDDnp was the more susceptible to cathepsin L. Abz-F-R-L-EDDnp was able to detect papain in the range of 1 to 15 pM. Human plasma kallikrein hydrolyzed Abz-F-R-R-EDDnp with significant efficiency (k(cat)/K(m) = 1833 mM(-1) s(-1)) and tissue kallikrein was very selective, hydrolyzing only the peptides Abz-F-R-A-EDDnp (k(cat)/K(m) = 2852 mM(-1) s(-1)) and Abz-F-R-S-EDDnp (k(cat)/K(m) = 4643 mM(-1) s(-1)). All Abz-F-R-X-EDDnp peptides were resistant to hydrolysis by thrombin and activated factor X.     

The catalytic mode of cysteine proteinases of papain (C1) family

The Proton Inventory (PI) method has been applied in the hydrolysis of synthetic substrates by papain, chymopapain and stem bromelain, comparing also their corresponding pH-(k(cat)/K(m)) profiles, and it was found: (a) k(cat)/K(m)=k(1), and thus K(S)=k(2)/k(1) is a dynamic equilibrium constant, (b) bowed-downward PI for k(cat)/K(m) exhibiting large inverse SIE, and (c) linear PI exhibiting large normal SIE for K(S), k(2) and k(3). A novel finding of this work is that the association of substrates onto all three studied cysteine proteinases proceeds via a stepwise pathway, in contrast to purely concerted pathways found previously for both acylation and deacylation. A hydrogen bond, which seems more likely to be developed across a pK(a)-value close to 4.00, connecting [see text] (papain/chymopapain or bromelain numbering), constitutes another novelty of this work.     

Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Kinetics and comparative reactivity of human class I and class IIb histone deacetylases

Histone deacetylase (HDAC) enzymes modulate gene expression through the deacetylation of acetylated lysine residues on histone proteins. They operate in biological systems as part of multiprotein corepressor complexes. To understand the reactivity of isolated HDACs and the contribution of cofactor binding to reactivity, the reaction kinetics of isolated, recombinant human HDACs 1, 2, 3, 6, 8, and 10 were measured using a novel, continuous protease-coupled enzyme assay. Values of k(cat) and k(cat)/K(m) and the pH dependence of these values were determined for the reactions of each isozyme with acetyl-Gly-Ala-(N(epsilon)-acetyl-Lys)-AMC. Values of k(cat) spanned the range of 0.006-2.8 s(-1), and k(cat)/K(m) values ranged from 60 to 110000 M(-1) s(-1). The pH profiles for both k(cat) and k(cat)/K(m) were bell-shaped for all of the HDAC isozymes, with pH optima at approximately pH 8. Values of K(i) for the inhibitor trichostatin A were determined for each isozyme. The inhibition constants were generally similar for all HDAC isozymes, except that the value for HDAC8 was significantly higher than that for the other isozymes. The reaction of HDAC8 with an alternative substrate was performed to assess the steric requirements of the HDAC8 active site, and the effect of phosphorylation on HDAC1 activity was examined. The results are discussed in terms of the biological roles of the HDAC enzymes and the proposed reaction mechanism of acetyllysine hydrolysis by these enzymes.     

Proton inventories constitute reliable tools in investigating enzymatic mechanisms: application on a novel thermo-stable extracellular protease from a halo-alkalophilic Bacillus sp

A novel protease designated protease-A-17N-1, was purified from the halo-alkalophilic Bacillus sp. 17N-1, and found active in media containing dithiothreitol and EDTAK(2). This enzyme maintained significant activity from pH 6.00 to 9.00, showed optimum k(cat)/K(m) value at pH 7.50 and 33 degrees C. It was observed that only specific inhibitors of cysteine proteinases inhibited its activity. The pH-(k(cat)/K(m)) profile of protease-A-17N-1 was described by three pK(a)s in the acid limb, and one in the alkaline limb. Both are more likely due t3o the protonic dissociation of an acidic residue, and the development and subsequent deprotonation of an ion-pair, respectively, in its catalytic site, characteristic for cysteine proteinases. Moreover, both the obtained estimates of rate constant k(1) and the ratio k(2)/k(-1) at 25 degrees C, from the temperature-(k(cat)/K(m)) profile of protease-A-17N-1, were found similar to those estimated from the proton inventories of the same parameter, verifying the reliability of the latter methodology. Besides, the bowed-downward proton inventories of k(cat)/K(m), as well as the large inverse SIE observed for this parameter, in combination with its dependence versus temperature, were showed unambiguously that k(cat)/K(m) = k(1). Such results suggest that the novel enzyme is more likely to be a cysteine proteinase functioning via a general acid-base mechanism.     

Diffusion-limited component of reactions catalyzed by Bacillus cereus beta-lactamase I

The Bacillus cereus beta-lactamase I catalyzes the hydrolysis of a wide variety of penicillins and cephalosporins with values of k(cat)/K(m) varying over several orders of magnitude. The values of this parameter for the most reactive of these compounds, benzylpenicillin, I, and furylacryloyl-penicillin, II (k(cat)/K(m) = 2.43 x 10(7) M(-1) s(-1) and 2.35 x 10(7) M(-1) s(-1), respectively, at pH 7.0 in potassium phosphate buffer containing 0.17 M KCl, I(c) = 0.63, 25 degrees C) are decreased markedly by increasing viscosity in sucrose- or glycerol-containing buffers. The relative sensitivities to viscosity of k(cat)/K(m) values for I and for cephaloridine, III, were found to be virtually unchanged at pH 3.8 from those observed at pH 7.0. The differential effects of viscosity on the reactive vs. the sluggish [e.g., cephalothin (IV), k(cat)/K(m) = 1 x 10(4) M(-1) s(-1)] substrates support the contention that the rates of reaction of the former with the enzyme are in part diffusion controlled. Quantitative analysis gives values for the association rate constants, k(1), of 7.6 x 10(7) M(-1) s(-1), 4 x 10(7) M(-1) s(-1), and 1.1 x 10(7) M(-1) s(-1) for I, II, and III, respectively. As both reactive and sluggish substrates associate with the active site of the enzyme with relatively similar rate constants, the variation in k(cat)/K(m) values is primarily due to the variation in the partition ratios k(-1)/k(2), for the ES complex, which are 2.3, 0.77, and 30 for I, II, and III, respectively. The preceding analysis is based on direct application of the Stokes-Einstein diffusion law to enzyme kinetics. The range of applicability of this law to the diffusion of substrate size molecules and the mechanics of diffusion of ionic species through viscous solutions of sucrose vs. polymers are explored.     

Biochemical characterization of recombinant L-asparaginase (AnsA) from Rhizobium etli, a member of an increasing rhizobial-type family of L-asparaginases

We report the expression, purification, and characterization of L-asparaginase (AnsA) from Rhizobium etli. The enzyme was purified to homogeneity in a single-step procedure involving affinity chromatography, and the kinetic parameters K(m), V(max), and k(cat) for L-asparagine were determined. The enzymatic activity in the presence of a number of substrates and metal ions was investigated. The molecular mass of the enzyme was 47 kDa by SDS-PAGE. The enzyme showed a maximal activity at 50 degrees C, but the optimal temperature of activity was 37 degrees C. It also showed maximal and optimal activities at pH 9.0. The values of K(m), V(max), k(cat), and k(cat)/K(m) were 8.9 +/- 0.967 × 10?3 M, 128 +/- 2.8 U/mg protein, 106 +/- 2 s?1, and 1.2 +/- 0.105 × 10? M?1s?1, respectively. The L-asparaginase activity was reduced in the presence of Mn2?, Zn2?, Ca2?, and Mg2? metal ions for about 52% to 31%. In addition, we found that NH??, L-Asp, D-Asn, and beta-aspartyl-hydroxamate in the reaction buffer reduced the activity of the enzyme, whereas L-Gln did not modify its enzymatic activity. This is the first report on the expression and characterization of the L-asparaginase (AnsA) from R. etli. Phylogenetic analysis of asparaginases reveals an increasing group of known sequences of the Rhizobialtype asparaginase II family.     

Kinetic mechanism of an aldehyde reductase of Saccharomyces cerevisiae that relieves toxicity of furfural and 5-hydroxymethylfurfural

An effective means of relieving the toxicity of furan aldehydes, furfural (FFA) and 5-hydroxymethylfurfural (HMF), on fermenting organisms is essential for achieving efficient fermentation of lignocellulosic biomass to ethanol and other products. Ari1p, an aldehyde reductase from Saccharomyces cerevisiae, has been shown to mitigate the toxicity of FFA and HMF by catalyzing the NADPH-dependent conversion to corresponding alcohols, furfuryl alcohol (FFOH) and 5-hydroxymethylfurfuryl alcohol (HMFOH). At pH 7.0 and 25°C, purified Ari1p catalyzes the NADPH-dependent reduction of substrates with the following values (k(cat) (s(-1)), k(cat)/K(m) (s(-1)mM(-1)), K(m) (mM)): FFA (23.3, 1.82, 12.8), HMF (4.08, 0.173, 23.6), and dl-glyceraldehyde (2.40, 0.0650, 37.0). When acting on HMF and dl-glyceraldehyde, the enzyme operates through an equilibrium ordered kinetic mechanism. In the physiological direction of the reaction, NADPH binds first and NADP(+) dissociates from the enzyme last, demonstrated by k(cat) of HMF and dl-glyceraldehyde that are independent of [NADPH] and (K(ia)(NADPH)/k(cat)) that extrapolate to zero at saturating HMF or dl-glyceraldehyde concentration. Microscopic kinetic parameters were determined for the HMF reaction (HMF+NADPH?HMFOH+NADP(+)), by applying steady-state, presteady-state, kinetic isotope effects, and dynamic modeling methods. Release of products, HMFOH and NADP(+), is 84% rate limiting to k(cat) in the forward direction. Equilibrium constants, [NADP(+)][FFOH]/[NADPH][FFA][H(+)]=5600×10(7)M(-1) and [NADP(+)][HMFOH]/[NADPH][HMF][H(+)]=4200×10(7)M(-1), favor the physiological direction mirrored by the slowness of hydride transfer in the non-physiological direction, NADP(+)-dependent oxidation of alcohols (k(cat) (s(-1)), k(cat)/K(m) (s(-1)mM(-1)), K(m) (mM)): FFOH (0.221, 0.00158, 140) and HMFOH (0.0105, 0.000104, 101).     

Specificity of natural and artificial substrates for human Cdc25A

Cdc25A is a dual-specific protein phosphatase involved in the regulation of the kinase activity of Cdk-cyclin complexes in the eukaryotic cell cycle. To understand the mechanism of this important regulator, we have generated highly purified biochemical reagents to determine the kinetic constants for human Cdc25A with respect to a set of peptidic, artificial, and natural substrates. Cdc25A and its catalytic domain (dN25A) demonstrate very similar kinetics toward the artificial substrates p-nitrophenyl phosphate (k(cat)/K(m) = 15-25 M(-1) s(-1)) and 3-O-methylfluorescein phosphate (k(cat)/K(m) = 1.1-1.3 x 10(4) M(-1) s(-1)). Phospho-peptide substrates exhibit extremely low second-order rate constants and a flat specificity profile toward Cdc25A and dN25A (k(cat)/K(m) = 1 to 10 M(-1) s(-1)). In contrast to peptidic substrates, Cdc25A and dN25A are highly active phosphatases toward the natural substrate, T14- and Y15-bis-phosphorylated Cdk2/CycA complex (Cdk2-pTpY/CycA) with k(cat)/K(m) values of 1.0-1.1 x 10(6) M(-1) s(-1). In the context of the Cdk2-pTpY/CycA complex, phospho-threonine is preferred over phospho-tyrosine by more than 10-fold. The highly homologous catalytic domain of Cdc25c is essentially inactive toward Cdk2-pTpY/CycA. Taken together these data indicate that a significant degree of the specificity of Cdc25 toward its Cdk substrate resides within the catalytic domain itself and yet is in a region(s) that is outside the phosphate binding site of the enzyme.     

Enzyme-coupled assay for beta-xylosidase hydrolysis of natural substrates

We describe here a new enzyme-coupled assay for the quantitation of d-xylose using readily available enzymes that allows kinetic evaluation of hemicellulolytic enzymes using natural xylooligosaccharide substrates. Hydrogen peroxide is generated as an intermediary analyte, which allows flexibility in the choice of the chromophore or fluorophore used as the final reporter. Thus, we present d-xylose quantitation results for solution-phase assays performed with both the fluorescent reporter resorufin, generated from N-acetyl-3,7-dihydroxyphenoxazine (Amplex Red), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), whose corresponding radical cation has an absorbance maximum at approximately 400 nm. We also describe a useful solid-phase variation of the assay performed with the peroxidase substrate 3,3'-diaminobenzidine tetrahydrochloride, which produces an insoluble brown precipitate. In addition, kinetic parameters for hydrolysis of the natural substrates xylobiose and xylotriose were obtained using this assay for a glycosyl hydrolase family 39 beta-xylosidase from Thermoanaerobacterium sp. strain JW/SL YS485 (Swiss-Prot accession no. O30360). At higher xylobiose substrate concentrations the enzyme showed an increase in the rate indicative of transglycosylation, while for xylotriose marked substrate inhibition was observed. At lower xylobiose concentrations k(cat) was 2.7 +/- 0.4 s(-1), K(m) was 3.3 +/- 0.7 mM, and k(cat)/K(m) was 0.82 +/- 0.21 mM(-1) . s(-1). Nonlinear curve fitting to a substrate inhibition model showed that for xylotriose K(i) was 1.7 +/- 0.1 mM, k(cat) was 2.0 +/- 0.1 s(-1), K(m) was 0.144 +/- 0.011 mM, and k(cat)/K(m) was 14 +/- 1.3 mM(-1) . s(-1).