Conformational preference and cis–trans isomerization of 4‐methylproline residues

Conformational preferences and prolyl cis?trans isomerizations of the (2S,4S)‐4‐methylproline (4S‐MePro) and (2S,4R)‐4‐methylproline (4R‐MePro) residues are explored at the M06‐2X/cc‐pVTZ//M06‐2X/6‐31+G(d) level of theory in the gas phase and in water, where solvation free energies were calculated using the implicit SMD model. In the gas phase, the down‐puckered γ‐turn structure with the trans prolyl peptide bond is most preferred for both Ac‐4S‐MePro‐NHMe and Ac‐4R‐MePro‐NHMe, in which the C₇ hydrogen bond between two terminal groups seems to play a role, as found for Ac‐Pro‐NHMe. Because of the C₇ hydrogen bonds weakened by the favorable direct interactions between the backbone C?O and H? N groups and water molecules, the 4S‐MePro residue has a strong preference of the up‐puckered polyproline II (PP_II) structure over the down‐puckered PP_II structure in water, whereas the latter somewhat prevails over the former for the 4R‐MePro residue. However, these two structures are nearly equally populated for Ac‐Pro‐NHMe. The calculated populations for the backbone structures of Ac‐4S‐MePro‐NHMe and Ac‐4R‐MePro‐NHMe in water are reasonably consistent with CD and NMR experiments. In particular, our calculated results on the puckering preference of the 4S‐MePro and 4R‐MePro residues with the PP_II structures are in accord with the observed results for the stability of the (X‐Y‐Gly)₇ triple helix with X = 4R‐MePro or Pro and Y = 4S‐MePro or Pro. The calculated rotational barriers indicate that the cis?trans isomerization may in common proceed through the anticlockwise rotation for Ac‐4S‐MePro‐NHMe, Ac‐4R‐MePro‐NHMe, and Ac‐Pro‐NHMe in water. The lowest rotational barriers become higher by 0.24?1.43 kcal/mol for Ac‐4S‐MePro‐NHMe and Ac‐4R‐MePro‐NHMe than those for Ac‐Pro‐NHMe in water. © 2010 Wiley Periodicals, Inc. Biopolymers 95: 51–61, 2011.     

Puckering transitions of pseudoproline residues

The puckering transitions of pesudoprolines such as oxazolidine and thiazolidine residues (Oxa and Thz dipeptides) with trans and cis prolyl peptide bonds were explored by optimizations along the endocyclic torsion angle χ¹ using quantum‐chemical methods in the gas phase and in water. The overall shapes of the potential energy surfaces for Oxa and Thz dipeptides in the gas phase and in water are similar to those for the Pro dipeptide, although there are some differences in relative stabilities of local minima and in barriers to puckering transition. On the whole, the barriers to puckering transition for Oxa and Thz dipeptides are computed to be 0.8–3.2 kcal/mol at the B3LYP/6‐311++G(d,p) level in the gas phase and in water, which are lower by 0.5–1.9 kcal/mol than those for the Pro dipeptide. The n → σ* interactions for the delocalization of the lone pair of the prolyl amide nitrogen into the antibonding orbitals that are anti to the lone pair appear to play a role in stabilizing the nonplanar puckered transition states over the corresponding planar structures. The calculated barriers indicate that the down‐to‐up puckering transition can proceed in the orders Pro < Oxa < Thz in the gas phase and Pro ≈ Oxa < Thz in water. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 444–455, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Steric and electronic interactions controlling the cis/trans isomer equilibrium at X‐pro tertiary amide motifs in solution

A systematic understanding of the noncovalent interactions that influence the structures of the cis conformers and the equilibrium between the cis and the trans conformers, of the X‐Pro tertiary amide motifs, is presented based on analyses of ¹H‐, ¹³C‐NMR and FTIR absorption spectra of two sets of homologous peptides, X‐Pro‐Aib‐OMe and X‐Pro‐NH‐Me (where X is acetyl, propionyl, isobutyryl and pivaloyl), in solvents of varying polarities. First, this work shows that the cis conformers of any X‐Pro tertiary amide motif, including Piv‐Pro, are accessible in the new motifs X‐Pro‐Aib‐OMe, in solution. These conformers are uniquely observable by FTIR spectroscopy at ambient temperatures and by NMR spectroscopy from temperatures as high as 273 K. This is made possible by the persistent presence of n_i‐1→π_i* interactions at Aib, which also influence the disappearance of steric effects at these cis X‐Pro rotamers. Second, contrary to conventional understanding, the energy contribution of steric effects to the cis/trans equilibrium at the X‐Pro motifs is found to be nonvariant (0.54 ± 0.02 kcal/mol) with increase in steric bulk on the X group. Third, the current studies provide direct evidence for the weak intramolecular interactions namely the n_i‐1→π_i*, the N_Pro???H_i+1 (C₅a), and the C₇ hydrogen bond that operate and influence the structures, stabilities, and dynamics between different conformational states of X‐Pro tertiary amide motifs. NMR and IR spectral data suggest that the cis conformers of X‐Pro motifs are ensembles of short‐lived rotamers about the C′_X–N_Pro bond. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 66–77, 2014.     

Isostructural unbranched alkyl‐chains as tools for stabilizing β‐turn structure

To investigate the structural role played by isostructural unbranched alkyl‐chains on the conformational ensemble and stability of β‐turn structures, the conformational properties of a designed model peptide: Plm‐Pro‐Gly‐Pda ( 1 , Plm: H₃C—(CH₂)₁₄—CONH—; Pda: —CONH— (CH₂)₁₄—CH₃) have been examined and compared with the parent peptide: Boc‐Pro‐Gly‐NHMe ( 2 , Boc: tert‐butoxycarbonyl; NHMe: N‐methylamide). The characteristic ¹³C NMR chemical‐shifts of the Pro C^β and C^γ resonances ascertained the incidence of an all‐trans peptide‐bond in low polarity deuterochloroform solution. Using FTIR and ¹H NMR spectroscopy, we establish that apolar alkyl‐chains flanking a β‐turn promoting Pro‐Gly sequence impart definite incremental stability to the well‐defined hydrogen‐bonded structure. The assessment of ¹H NMR derived thermodynamic parameters of the hydrogen‐bonded amide‐NHs via variable temperature indicate that much weaker hydrophobic interactions do contribute to the stability of folded reverse turn structures. The far‐UV CD spectral patterns of 1 and 2 in 2,2,2‐trifluoroethanol are consistent with Pro‐Gly specific type II β‐turn structure, concomitantly substantiate that the flanking alkyl‐chains induce substantial bias in enhanced β‐turn populations. In view of structural as well as functional importance of the Pro‐Gly mediated secondary structures, besides biochemical and biological significance of proteins lipidation via myristoylation or palmytoilation, we highlight potential convenience of the unbranched Plm and Pda moieities not only as main‐chain N‐ and C‐terminal protecting groups but also to mimic and stabilize specific isolated secondary and supersecondary structural components frequently observed in proteins and polypeptides. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 419–426, 2013.     

High‐resolution structures of collagen‐like peptides [(Pro‐Pro‐Gly)4‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)4]: Implications for triple‐helix hydration and Hyp(X) puckering

Structures of (Pro‐Pro‐Gly)₄‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)₄ (ppg9‐XYG) where (Xaa, Yaa) = (Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro‐Pro‐Gly)₉ peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down‐puckering conformation, as in ppg9‐OPG, and ppg9‐OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up‐puckering conformation if there is no specific reason to adopt the down‐puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9‐XYG peptides is very large, likely due to the unique rod‐like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 361–372, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of some soluble elastins by means of FT‐IR and 2D IR correlation spectroscopy

Fourier transform infrared (FT‐IR) spectroscopy combined with 2D correlation spectroscopy has been used to offer some information about stability and structure of some soluble elastins. Temperature has been chosen as the perturbation to monitor the infrared behavior of various soluble elastins, namely, α‐elastin p, α‐elastin, and k‐elastin. In the 3800–2700 cm^?1 region, the H‐containing groups were analyzed. The bonded hydroxyls are found to decrease prior to the NH‐related hydrogen bonds and also to the conformational reorganization of hydrocarbon chains. The transition temperatures were evaluated and they were found to agree with those obtained from DSC data. The FTIR spectra and their 2nd derivatives denote that α‐ elastins exhibited amide‐I, ‐II and ‐III bands at 1656, 1539 and 1236 cm^?1, respectively, while in k‐elastin these bands were found at 1652 cm^?1 for amide I, 1540 cm^?1 for amide II and 1248 cm^?1 for amide III. The macroscopic IR finger‐print method, which combines: general IR spectra, secondary derivative spectra, and 2D‐IR correlation spectra, is useful to discriminate different elastins. Thus using the differences of the position and intensity of the bands from “fingerprint region” of studied elastins, which include the peaks assigned to C?O, C? C groups from α‐helix, β‐turn, and the peaks assigned to the amide groups, it is possible to identify and discriminate elastins from each others. Furthermore, the pattern of 2D‐IR correlation spectra under thermal perturbation, allow their direct identification and discrimination. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1072–1084, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformation dependence of the CαDα stretch mode in peptides. II. Explicitly hydrated alanine peptide structures

Our previous studies of the potential utility of the C^αD^α stretch frequency, ν(CD), as a tool for determining conformation in peptide systems (Mirkin and Krimm, J Phys Chem A 2004, 108, 10923–10924; 2007, 111, 5300–5303) dealt with the spectroscopic characteristics of isolated alanine peptides with α_R, β, and polyproline II structures. We have now extended these ab initio calculations to include various explicit‐water environments interacting with such conformers. We find that the structure‐discriminating feature of this technique is in fact enhanced as a result of the conformation‐specific interactions of the bonding waters, in part due to our finding (Mirkin and Krimm, J Phys Chem B 2008, 112, 15268) that C^α? D^α…O(water) hydrogen bonds can be present in addition to those expected between water and the CO and NH of the peptide groups. In fact, ν(CD) is hardly affected by the latter bonding but can be shifted by up to 70 cm^?1 by the former hydrogen bonds. We also discuss the factors that will have to be considered in developing the molecular dynamics (MD) treatment needed to satisfactorily take account of the influence of outer water layers on the structure of the first‐layer water molecules that hydrogen bond to the peptide backbone. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 791–800, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Comprehensive Chiroptical Study of Proline‐Containing Diamide Compounds

The continuously growing interest in the understanding of peptide folding led to the conformational investigation of methylamides of N‐acetyl‐amino acids as diamide models. Here we report the results of detailed conformational analysis on Ac‐Pro‐NHMe and Ac‐β‐HPro‐NHMe diamides. These compounds were analyzed by experimental and computational methods, the conformational distributions obtained by Density Functional Theory (DFT) calculations for isolated and solvated diamide compounds are discussed. The conformational preference of proline‐containing diamide compounds as a function of the ambience was observed by a number of chiroptical spectroscopic techniques, such as vibrational circular dichroism (VCD), electronic circular dichroism (ECD), Raman optical activity (ROA) spectroscopy, and additionally by single crystal X‐ray diffraction analyses. Based on a comparison between Ac‐Pro‐NHMe and Ac‐β‐HPro‐NHMe, one can conclude that due to the greater conformational freedom of the β‐HPro derivative, Ac‐β‐HPro‐NHMe shows different behavior in solid‐ and solution‐phase, as well. Ac‐β‐HPro‐NHMe tends to form cis Ac‐β‐HPro amide conformation in water, dichloromethane, and acetonitrile in contrast to its α‐Pro analog. On the other hand, the crystal structure of the β‐HPro compound cannot be related to any of the conformers obtained in vacuum and solution while the X‐ray structure of Ac‐Pro‐NHMe was identified as tα_L–, which is a trans Ac‐Pro amide containing conformer also predominant in polar solvents. Chirality 26:228–242, 2014. © 2014 Wiley Periodicals, Inc.     

N‐terminal truncated pyroglutamyl β amyloid peptide Aβpy3‐42 shows a faster aggregation kinetics than the full‐length Aβ1‐42

We tested directly the differences in the aggregation kinetics of three important β amyloid peptides, the full‐length Aβ1‐42, and the two N‐terminal truncated and pyroglutamil modified Aβpy3‐42 and Aβpy11‐42 found in different relative concentrations in the brains in normal aging and in Alzheimer disease. By following the circular dichroism signal and the ThT fluorescence of the solution in phosphate buffer, we found substantially faster aggregation kinetics for Aβpy3‐42. This behavior is due to the particular sequence of this peptide, which is also responsible for the specific oligomeric aggregation states, found by TEM, during the fibrillization process, which are very different from those of Aβ1‐42, more prone to fibril formation. In addition, Aβpy3‐42 is found here to have an inhibitory effect on Aβ1‐42 fibrillogenesis, coherently with its known greater infective power. This is an indication of the important role of this peptide in the aggregation process of β‐peptides in Alzheimer disease. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 861–873, 2009. This article was originally published online as an accepted preprint. The “Published Online“ date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Model peptide‐based system used for the investigation of metal ions binding to histidine‐containing polypeptides

The reaction of histidine‐containing polypeptides with toxic and essential metals and the molecular mechanism of complexation has yet to be determined, particularly with respect to the conformational changes of the interacting macromolecules. Therefore, a system of oligopeptides containing histidine residues in various positions of Ala or Gly sequences has been designed and used in heavy metal comparatively binding experiments. The role of spacing residues (Gly and Ala repeats) in selecting the various conformations was investigated. The newly synthesized peptides and metal ion adducts have been characterized by Fourier transform infrared spectroscopy (FTIR) as well as electrospray ion trap mass spectrometry (ESI–MS) and circular dichroism (CD). The analysis of CD‐spectra of the four peptides in water revealed that the secondary structure depends much on the position of each amino acid in the peptide backbone. Our peptides system reveals various binding mechanisms of metal ions to peptides depending on the position of histidine residue and the corresponding conformations of Ala or Gly sequences. Biological and medical consequences of conformational changes of metal‐bound peptides are further discussed. Thus, the binding of heavy metals to four peptides may serve as a model system with respect to the conformational consequences of the metal addition on the amino acid repeats situated in prion protein. © 2010 Wiley Periodicals, Inc. Biopolymers 93:497–508, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformational mimicry. II. An obligatory cis amide bond in a small linear peptide

The structure of Z-Pro psi [CN4]-Ala-OBzl has been determined by X-ray crystallographic techniques. The structure crystallizes in space group P2(1) with cell constants a = 22.176(3) A, b = 6.141(1)A, c = 8.275(1) A, beta = 98.31(1), and Z = 2. The structure has been refined to a residual of 0.038 for 2538 independent data. The amide bond between the prolyl and alanyl residues is cis, a result of the presence of the tetrazole ring system, as is the urethane bond linking the benzyloxycarbonyl and the prolyl groups. A comparison of the structures in this study to other structures containing cis amide bonds shows that the tetrazole ring system, when incorporated into peptides, mimics a cis amide bond. Changes in the distance between the alpha-carbons adjacent to the tetrazole rings in the linear peptide as compared with the bicyclic diketopiperazine required a reassessment of the conformational mimicry with the cis amide bond.     

Ab initio conformational study of N-acetyl-L-proline-N',N'-dimethylamide: a model for polyproline

We report here the results on N-acetyl-l-proline-N',N'-dimethylamide (Ac-Pro-NMe2) as a model for polyproline at the HF/6-31+G(d) level with the conductor-like polarizable continuum model of self-consistent reaction field methods to figure out the conformational preference and cis-trans isomerization of polyproline in the gas phase, chloroform, methanol, and water. The second methyl substitution at the carboxyl amide end results in different backbone structures and their populations from those of N-acetyl-L-proline-N-methylamide (Ac-Pro-NHMe). In particular, all conformations with the C7 hydrogen bond between acetyl and amide ends, which is the most probable conformations of Ac-Pro-NHMe in the gas phase and in nonpolar solvents, disappeared for Ac-Pro-NMe2 even in the gas phase due to the lack of amide hydrogen. The dominant conformation for Ac-Pro-NMe2 is the polyproline II structure with the trans prolyl peptide bond in the gas phase and in solutions. In methanol, the population of the polyproline I structure with the cis prolyl peptide bond is calculated to be larger than that in water, which is consistent with experiments. It should be noted that Ac-Pro-NMe2 has higher rotational barriers for the cis-trans isomerization of the Ac-Pro peptide bond than Ac-Pro-NHMe in the gas phase and in solutions, which could be due to the lack of the intramolecular hydrogen bond between prolyl nitrogen and carboxyl N-H group for the transition state of Ac-Pro-NMe2. The rotational barriers for Ac-Pro-NMe2 are increased with the increase of solvent polarity, as seen for Ac-Pro-NHMe.     

Modulation of SHP‐1 phosphatase activity by monovalent and bivalent SH2 phosphopeptide ligands

A sequence derived from the epithelial receptor tyrosine kinase Ros (pY2267) represents a high‐affinity binding partner for protein tyrosine phosphatase SHP‐1 and was recently used as lead structure to analyze the recognition requirements for the enzyme's N‐SH2 domain. Here, we focused on a set of peptides comprising C‐terminally extended linear and conformationally constrained side chain‐bridged cyclic N‐SH2 ligands based on the consensus sequence LxpYhxh(h/b)(h/b) (x = any amino acid, h = hydrophobic, and b = basic residue). Furthermore, the bivalent peptides described were designed to modulate the activity of SHP‐1 through binding to both, the N‐SH2 domain as well as an independent binding site on the surface of the catalytic domain (PTP domain). Consistent with previous experimental findings, surface plasmon resonance experiments revealed dissociation constants of most compounds in the low micromolar range. One peptide, EGLNpYc[KVD]MFPAPEEE? NH₂, displayed favorable binding affinity, but reduced ability to stimulate SHP‐1. Docking experiments revealed that the binding of this ligand occurs in binding mode I, recently described to lead to an inhibited activation of SHP‐1. In summary, results presented in this study suggest that inhibitory N‐SH2 ligands of SHP‐1 may be obtained by designing bivalent compounds that associate with the N‐SH2 domain and simultaneously occupy a specific binding site on the PTP domain. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 102–112, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Escherichia coli cyclophilin B binds a highly distorted form of trans-prolyl peptide isomer.

Cyclophilins facilitate the peptidyl-prolyl isomerization of a trans-isomer to a cis-isomer in the refolding process of unfolded proteins to recover the natural folding state with cis-proline conformation. To date, only short peptides with a cis-form proline have been observed in complexes of human and Escherichia coli proteins of cyclophilin A, which is present in cytoplasm. The crystal structures analyzed in this study show two complexes in which peptides having a trans-form proline, i.e. succinyl-Ala-trans-Pro-Ala-p-nitroanilide and acetyl-Ala-Ala-trans-Pro-Ala-amidomethylcoumarin, are bound on a K163T mutant of Escherichia coli cyclophilin B, the preprotein of which has a signal sequence. Comparison with cis-form peptides bound to cyclophilin A reveals that in any case the proline ring is inserted into the hydrophobic pocket and a hydrogen bond between CO of Pro and Neta2 of Arg is formed to fix the peptide. On the other hand, in the cis-isomer, the formation of two hydrogen bonds of NH and CO of Ala preceding Pro with the protein fixes the peptide, whereas in the trans-isomer formation of a hydrogen bond between CO preceding Ala-Pro and His47 Nepsilon2 via a mediating water molecule allows the large distortion in the orientation of Ala of Ala-Pro. Although loss of double bond character of the amide bond of Ala-Pro is essential to the isomerization pathway occurring by rotating around its bond, these peptides have forms impossible to undergo proton transfer from the guanidyl group of Arg to the prolyl N atom, which induces loss of double bond character.     

Nociceptin and its natural and specifically‐modified fragments: Structural studies

The vibrational structures of Nociceptin (FQ), its short bioactive fragments, and specifically‐modified [Tyr¹]FQ (1‐6), [His¹]FQ (1‐6), and [His^1,4]FQ (1‐6) fragments were characterized. We showed that in the solid state, all of the aforementioned peptides except FQ adopt mainly turn and disordered secondary structures with a small contribution from an antiparallel β‐sheet conformation. FQ (1‐11), FQ (7‐17) [His¹]FQ (1‐6), and [His^1,4]FQ (1‐6) have an α‐helical backbone arrangement that could also slightly influence their secondary structure. The adsorption behavior of these peptides on a colloidal silver surface in an aqueous solution (pH = ～8.3) was investigated by means of surface‐enhanced Raman scattering (SERS). All of the peptides, excluding FQ (7‐17), chemisorbed on the colloidal silver surfaces through a Phe⁴ residue, which for FQ, FQ (1‐11), FQ (1‐6), [Tyr¹]FQ (1‐6), and [His¹]FQ (1‐6) lies almost flat on this surface, while for FQ (1‐13) and FQ (1‐13)NH₂ adopts a slightly tilted orientation with respect to the surface. The Tyr¹ residue in [Tyr¹]FQ (1‐6) does not interact with the colloidal silver surface, suggesting that the Tyr¹ and Phe⁴ side chains are located on the opposite sides of the peptide backbone, which can be also true for His¹ and Phe⁴ in [His¹]FQ (1‐6). The lone pair of electrons on the oxygen atom of the ionized carbonyl group of FQ (1‐13) and FQ (7‐17) appears to be coordinated to the colloidal silver nanoparticles, whereas in the case of the remaining peptides, it only assists in the adsorption process, similar to the ? NH₂ group. We also showed that upon adsorption, the secondary structure of these peptides is altered. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1039–1054, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

VCD Robustness of the Amide‐I and Amide‐II Vibrational Modes of Small Peptide Models

The rotational strengths and the robustness values of amide‐I and amide‐II vibrational modes of For(AA)_nNHMe (where AA is Val, Asn, Asp, or Cys, n = 1–5 for Val and Asn; n = 1 for Asp and Cys) model peptides with α‐helix and β‐sheet backbone conformations were computed by density functional methods. The robustness results verify empirical rules drawn from experiments and from computed rotational strengths linking amide‐I and amide‐II patterns in the vibrational circular dichroism (VCD) spectra of peptides with their backbone structures. For peptides with at least three residues (n ≥ 3) these characteristic patterns from coupled amide vibrational modes have robust signatures. For shorter peptide models many vibrational modes are nonrobust, and the robust modes can be dependent on the residues or on their side chain conformations in addition to backbone conformations. These robust VCD bands, however, provide information for the detailed structural analysis of these smaller systems. Chirality 27:625–634, 2015 © 2015 Wiley Periodicals, Inc.     

Pin1-dependent prolyl isomerization regulates dephosphorylation of Cdc25C and tau proteins

The reversible protein phosphorylation on serine or threonine residues that precede proline (pSer/Thr-Pro) is a key signaling mechanism for the control of various cellular processes, including cell division. The pSer/Thr-Pro moiety in peptides exists in the two completely distinct cis and trans conformations whose conversion is catalyzed specifically by the essential prolyl isomerase Pin1. Previous results suggest that Pin1 might regulate the conformation and dephosphorylation of its substrates. However, it is not known whether phosphorylation-dependent prolyl isomerization occurs in a native protein and/or affects dephosphorylation of pSer/Thr-Pro motifs. Here we show that the major Pro-directed phosphatase PP2A is conformation-specific and effectively dephosphorylates only the trans pSer/Thr-Pro isomer. Furthermore, Pin1 catalyzes prolyl isomerization of specific pSer/Thr-Pro motifs both in Cdc25C and tau to facilitate their dephosphorylation by PP2A. Moreover, Pin1 and PP2A show reciprocal genetic interactions, and prolyl isomerase activity of Pin1 is essential for cell division in vivo. Thus, phosphorylation-specific prolyl isomerization catalyzed by Pin1 is a novel mechanism essential for regulating dephosphorylation of certain pSer/Thr-Pro motifs.     

The amide III vibrational circular dichroism band as a probe to detect conformational preferences of alanine dipeptide in water

The conformational preferences of blocked alanine dipeptide (ADP), Ac‐Ala‐NHMe, in aqueous solution were studied using vibrational circular dichroism (VCD) together with density functional theory (DFT) calculations. DFT calculations of three most representative conformations of ADP surrounded by six explicit water molecules immersed in a dielectric continuum have proven high sensitivity of amide III VCD band shape that is characteristic for each conformation of the peptide backbone. The polyproline II (P_II) and α_R conformation of ADP are associated with a positive VCD band while β conformation has a negative VCD band in amide III region. Knowing this spectral characteristic of each conformation allows us to assign the experimental amide III VCD spectrum of ADP. Moreover, the amide III region of the VCD spectrum was used to determine the relative populations of conformations of ADP in water. Based on the interpretation of the amide III region of VCD spectrum we have shown that dominant conformation of ADP in water is P_II which is stabilized by hydrogen bonded water molecules between CO and NH groups on the peptide backbone. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 814–818, 2014.