Comparative functional analysis of skull morphology of tree-gouging primates

Many primates habitually feed on tree exudates such as gums and saps. Among these exudate feeders, Cebuella pygmaea, Callithrix spp., Phaner furcifer, and most likely Euoticus elegantulus elicit exudate flow by biting into trees with their anterior dentition. We define this behavior as gouging. Beyond the recent publication by Dumont ([1997] Am J Phys Anthropol 102:187-202), there have been few attempts to address whether any aspect of skull form in gouging primates relates to this specialized feeding behavior. However, many researchers have proposed that tree gouging results in larger bite force, larger internal skull loads, and larger jaw gapes in comparison to other chewing and biting behaviors. If true, then we might expect primate gougers to exhibit skull modifications that provide increased abilities to produce bite forces at the incisors, withstand loads in the skull, and/or generate large gapes for gouging.We develop 13 morphological predictions based on the expectation that gouging involves relatively large jaw forces and/or jaw gapes. We compare skull shapes for P. furcifer to five cheirogaleid taxa, E. elegantulus to six galagid species, and C. jacchus to two tamarin species, so as to assess whether gouging primates exhibit these predicted morphological shapes. Our results show little morphological evidence for increased force-production or load-resistance abilities in the skulls of these gouging primates. Conversely, these gougers tend to have skull shapes that are advantageous for creating large gapes. For example, all three gouging species have significantly lower condylar heights relative to the toothrow at a given mandibular length in comparison with closely related, nongouging taxa. Lowering the height of the condyle relative to the mandibular toothrow should reduce the stretching of the masseters and medial pterygoids during jaw opening, as well as position the mandibular incisors more anteriorly at wide jaw gapes. In other words, the lower incisors will follow a more vertical trajectory during both jaw opening and closing.We predict, based on these findings, that tree-gouging primates do not generate unusually large forces, but that they do use relatively large gapes during gouging. Of course, in vivo data on jaw forces and jaw gapes are required to reliably assess skull functions during gouging.     

Trabecular bone structure in the primate wrist

Trabecular (or cancellous) bone has been shown to respond to mechanical loading throughout ontogeny and thus can provide unique insight into skeletal function and locomotion in comparative studies of living and fossil mammalian morphology. Trabecular bone of the hand may be particularly functionally informative because the hand has more direct contact with the substrate compared with the remainder of the forelimb during locomotion in quadrupedal mammals. This study investigates the trabecular structure within the wrist across a sample of haplorhine primates that vary in locomotor behaviour (and thus hand use) and body size. High‐resolution microtomographic scans were collected of the lunate, scaphoid, and capitate in 41 individuals and eight genera (Homo, Gorilla, Pan, Papio, Pongo, Symphalangus, Hylobates, and Ateles). We predicted that particular trabecular parameters would 1) vary across suspensory, quadrupedal, and bipedal primates based on differences in hand use and load, and 2) scale with carpal size following similar allometric patterns found previously in other skeletal elements across a larger sample of mammals and primates. Analyses of variance (trabecular parameters analysed separately) and principal component analyses (trabecular parameters analysed together) revealed no clear functional signal in the trabecular structure of any of the three wrist bones. Instead, there was a large degree of variation within suspensory and quadrupedal locomotor groups, as well as high intrageneric variation within some taxa, particularly Pongo and Gorilla. However, as predicted, Homo sapiens, which rarely use their hands for locomotion and weight support, were unique in showing lower relative bone volume (BV/TV) compared with all other taxa. Furthermore, parameters used to quantify trabecular structure within the wrist scale with size generally following similar allometric patterns found in trabeculae of other mammalian skeletal elements. We discuss the challenges associated with quantifying and interpreting trabecular bone within the wrist. J. Morphol. 275:572–585, 2014. © 2013 Wiley Periodicals, Inc.     

The functional morphology of the anterior masticatory apparatus in tree‐gouging marmosets (cebidae,primates)

Although all genera of Callitrichinae feed on tree exudates, marmosets (Callithrix and Cebuella) use specialized anterior teeth to gouge holes in trees and actively stimulate exudate flow. Behavioral studies demonstrate that marmosets use large jaw gapes but do not appear to generate large bite forces (relative to maximal ability) during gouging. Nonetheless, the anterior teeth of marmosets likely experience different loads during gouging compared to nongouging platyrrhines. We use histological data from sectioned teeth, μCTs of jaws and teeth, and in vitro tests of symphyseal strength to compare the anterior masticatory apparatus in Callithrix to nongouging tamarins (Saguinus) and other cebids. We test the hypotheses that (1) marmoset anterior teeth are adapted to accommodate relatively high stresses linked to dissipating gouging forces and (2) the mandibular symphysis does not provide increased load resistance ability compared with closely related nongouging platyrrhines. Differences in decussation between Callithrix and Saguinus are greatest in the anterior teeth, suggesting an increased load resistance ability specifically in incisor and canine enamel of Callithrix. Callithrix lower incisor crowns are labiolingually thicker suggesting increased bending resistance in this plane and improved wedging ability compared with Saguinus. Anterior tooth roots are larger relative to symphyseal bone volume in Callithrix. Anterior tooth root surface areas also are larger in marmosets for their symphyseal volume, but it remains unclear whether this relative increase is an adaptation for dissipating dental stresses versus a growth‐related byproduct of relatively elongated incisors. Finally, simulated jaw loading suggests a reduced ability to withstand external forces in the Callithrix symphysis. The contrast between increased load resistance ability in the anterior dentition versus relatively reduced symphyseal strength (1) suggests a complex loading environment during gouging, (2) highlights the possibility of distinct loading patterns in the anterior teeth versus the symphysis, and (3) points to a potential mosaic pattern of dentofacial adaptations to tree gouging. J. Morphol., 2011. © 2011 Wiley‐Liss, Inc.     

A comparison of proximal humeral cancellous bone of great apes and humans

The shoulder is the most mobile joint in the primate body, and is involved in both locomotor and manipulative activities. The presumed functional sensibility of trabecular bone can offer a way of decoding the activities to which the forelimbs of fossil primates were subjected. We examine the proximal humeral trabecular architecture in a relatively closely related group of similarly sized hominids (Pongo pygmaeus, Pan troglodytes, and Homo sapiens), in order to evaluate the effect of diverging habitual motion behaviors of the shoulder complex in a coherent phylogenetic group. In order to characterize and compare the humeral trabecular architectures of the three species, we imaged a large sample by high-resolution computed tomography (HrCT) and quantified their trabecular architectures by standard bone 3D morphometric parameters. Univariate statistical analysis was performed, showing significant differences among the species. However, univariate statistics could not highlight the structural particularity in the cancellous bone of each species. A principal component analysis also showed clear separation of the three taxa and enabled a structural characterization of the humeral trabecular bone of each species. We conclude that the differences in the architectural setup of the three hominids likely reflect multiple differences in their habitual activity patterns of their shoulder joint, although individual structural features are difficult to relate to specific loading conditions.     

Cross-sectional Bone Distribution in the Mandibles of Gouging and Non-gouging Platyrrhini

Recent morphometric analyses have led to dissimilar conclusions about whether the jaws of tree-gouging primates are designed to resist the purportedly large forces generated during this biting behavior. We further address this question by comparing the cross-sectional geometry of the mandibular corpus and symphysis in tree-gouging common marmosets (Callithrix jacchus) to nongouging saddleback tamarins (Saguinus fuscicollis) and squirrel monkeys (Saimiri sciureus). As might be expected, based on size, squirrel monkeys tend to have absolutely larger cross-sectional areas at each tooth location sampled, while saddleback tamarins are intermediate, followed by the smaller common marmosets. Similarly, the amount and distribution of cortical bone in squirrel monkey jaws provides them with increased ability to resist sagittal bending (I _xx ) and torsion (K) in the corpus as well as coronal bending (I _xx ) and shearing in the symphysis. However, when the biomechanical parameters are scaled to respective load arm estimates, there are few significant differences in relative resistance abilities among the 3 species. A power analysis indicates that we cannot statistically rule out subtle changes in marmoset jaw form linked to resisting loads during gouging. Nevertheless, our results correspond to studies in vivo of jaw loading, field data, and other comparative analyses suggesting that common marmosets do not generate relatively large bite forces during tree gouging. The 3 species are like most other anthropoids in having thinner bone on the lingual than on the buccal side of the mandibular corpus at M₁. The similarity in corporal shape across anthropoids supports a hypothesized stereotypical pattern of jaw loading during chewing and may indicate a conserved pattern of mandibular growth for the suborder. Despite the overall similarity, platyrrhines may differ slightly from catarrhines in the details of their cortical bone distribution.

Does skeletal anatomy reflect adaptation to locomotor patterns? cortical and trabecular architecture in human and nonhuman anthropoids

Although the correspondence between habitual activity and diaphyseal cortical bone morphology has been demonstrated for the fore- and hind-limb long bones of primates, the relationship between trabecular bone architecture and locomotor behavior is less certain. If sub-articular trabecular and diaphyseal cortical bone morphology reflects locomotor patterns, this correspondence would be a valuable tool with which to interpret morphological variation in the skeletal and fossil record. To assess this relationship, high-resolution computed tomography images from both the humeral and femoral head and midshaft of 112 individuals from eight anthropoid genera (Alouatta, Homo, Macaca, Pan, Papio, Pongo, Trachypithecus, and Symphalangus) were analyzed. Within-bone (sub-articular trabeculae vs. mid-diaphysis), between-bone (forelimb vs. hind limb), and among-taxa relative distributions (femoral:humeral) were compared. Three conclusions are evident: (1) Correlations exists between humeral head sub-articular trabecular bone architecture and mid-humerus diaphyseal bone properties; this was not the case in the femur. (2) In contrast to comparisons of inter-limb diaphyseal bone robusticity, among all species femoral head trabecular bone architecture is significantly more substantial (i.e., higher values for mechanically relevant trabecular bone architectural features) than humeral head trabecular bone architecture. (3) Interspecific comparisons of femoral morphology relative to humeral morphology reveal an osteological "locomotor signal" indicative of differential use of the forelimb and hind limb within mid-diaphysis cortical bone geometry, but not within sub-articular trabecular bone architecture.     

Trabecular Architecture of the Manual Elements Reflects Locomotor Patterns in Primates

The morphology of trabecular bone has proven sensitive to loading patterns in the long bones and metacarpal heads of primates. It is expected that we should also see differences in the manual digits of primates that practice different methods of locomotion. Primate proximal and middle phalanges are load-bearing elements that are held in different postures and experience different mechanical strains during suspension, quadrupedalism, and knuckle walking. Micro CT scans of the middle phalanx, proximal phalanx and the metacarpal head of the third ray were used to examine the pattern of trabecular orientation in Pan, Gorilla, Pongo, Hylobates and Macaca. Several zones, i.e., the proximal ends of both phalanges and the metacarpal heads, were capable of distinguishing between knuckle-walking, quadrupedal, and suspensory primates. Orientation and shape seem to be the primary distinguishing factors but differences in bone volume, isotropy index, and degree of anisotropy were seen across included taxa. Suspensory primates show primarily proximodistal alignment in all zones, and quadrupeds more palmar-dorsal orientation in several zones. Knuckle walkers are characterized by having proximodistal alignment in the proximal ends of the phalanges and a palmar-dorsal alignment in the distal ends and metacarpal heads. These structural differences may be used to infer locmotor propensities of extinct primate taxa.     

Trabecular architecture and joint loading of the proximal humerus in extant hominoids,Ateles, and Australopithecus africanus

Objectives

Several studies have investigated potential functional signals in the trabecular structure of the primate proximal humerus but with varied success. Here, we apply for the first time a “whole‐epiphyses” approach to analysing trabecular bone in the humeral head with the aim of providing a more holistic interpretation of trabecular variation in relation to habitual locomotor or manipulative behaviors in several extant primates and Australopithecus africanus.

Materials and methods

We use a “whole‐epiphysis” methodology in comparison to the traditional volume of interest (VOI) approach to investigate variation in trabecular structure and joint loading in the proximal humerus of extant hominoids, Ateles and A. africanus (StW 328).

Results

There are important differences in the quantification of trabecular parameters using a “whole‐epiphysis” versus a VOI‐based approach. Variation in trabecular structure across knuckle‐walking African apes, suspensory taxa, and modern humans was generally consistent with predictions of load magnitude and inferred joint posture during habitual behaviors. Higher relative trabecular bone volume and more isotropic trabeculae in StW 328 suggest A. africanus may have still used its forelimbs for arboreal locomotion.

Discussion

A whole‐epiphysis approach to analysing trabecular structure of the proximal humerus can help distinguish functional signals of joint loading across extant primates and can provide novel insight into habitual behaviors of fossil hominins.

     

Unique suites of trabecular bone features characterize locomotor behavior in human and non-human anthropoid primates

Understanding the mechanically-mediated response of trabecular bone to locomotion-specific loading patterns would be of great benefit to comparative mammalian evolutionary morphology. Unfortunately, assessments of the correspondence between individual trabecular bone features and inferred behavior patterns have failed to reveal a strong locomotion-specific signal. This study assesses the relationship between inferred locomotor activity and a suite of trabecular bone structural features that characterize bone architecture. High-resolution computed tomography images were collected from the humeral and femoral heads of 115 individuals from eight anthropoid primate genera (Alouatta, Homo, Macaca, Pan, Papio, Pongo, Trachypithecus, Symphalangus). Discriminant function analyses reveal that subarticular trabecular bone in the femoral and humeral heads is significantly different among most locomotor groups. The results indicate that when a suite of femoral head trabecular features is considered, trabecular number and connectivity density, together with fabric anisotropy and the relative proportion of rods and plates, differentiate locomotor groups reasonably well. A similar, yet weaker, relationship is also evident in the trabecular architecture of the humeral head. The application of this multivariate approach to analyses of trabecular bone morphology in recent and fossil primates may enhance our ability to reconstruct locomotor behavior in the fossil record.     

Trabecular Bone Structure Correlates with Hand Posture and Use in Hominoids

Bone is capable of adapting during life in response to stress. Therefore, variation in locomotor and manipulative behaviours across extant hominoids may be reflected in differences in trabecular bone structure. The hand is a promising region for trabecular analysis, as it is the direct contact between the individual and the environment and joint positions at peak loading vary amongst extant hominoids. Building upon traditional volume of interest-based analyses, we apply a whole-epiphysis analytical approach using high-resolution microtomographic scans of the hominoid third metacarpal to investigate whether trabecular structure reflects differences in hand posture and loading in knuckle-walking (Gorilla, Pan), suspensory (Pongo, Hylobates and Symphalangus) and manipulative (Homo) taxa. Additionally, a comparative phylogenetic method was used to analyse rates of evolutionary changes in trabecular parameters. Results demonstrate that trabecular bone volume distribution and regions of greatest stiffness (i.e., Young''s modulus) correspond with predicted loading of the hand in each behavioural category. In suspensory and manipulative taxa, regions of high bone volume and greatest stiffness are concentrated on the palmar or distopalmar regions of the metacarpal head, whereas knuckle-walking taxa show greater bone volume and stiffness throughout the head, and particularly in the dorsal region; patterns that correspond with the highest predicted joint reaction forces. Trabecular structure in knuckle-walking taxa is characterised by high bone volume fraction and a high degree of anisotropy in contrast to the suspensory brachiators. Humans, in which the hand is used primarily for manipulation, have a low bone volume fraction and a variable degree of anisotropy. Finally, when trabecular parameters are mapped onto a molecular-based phylogeny, we show that the rates of change in trabecular structure vary across the hominoid clade. Our results support a link between inferred behaviour and trabecular structure in extant hominoids that can be informative for reconstructing behaviour in fossil primates.     

Articular structure and function in Hylobates,Colobus, and Papio

It has been demonstrated in clinical and experimental studies that subarticular trabecular bone responds to mechanical loads transmitted across joints through changes in mass and structural organization. We investigated differences in mass, volume, and density of subarticular trabecular bone of the humeral and femoral head in Hylobates syndactylus, Colobus guereza, and Papio cynocephalus. Our hypothesis was that variations in trabecular properties between taxa may reflect differences in mechanical loading associated with different locomotor repertoires. A nondestructive method for measuring trabecular properties using optical luminance data measured from radiographs was developed. We also examined the relationship between internal trabecular properties and the external size and surface area of the humeral and femoral heads in these taxa. Our results suggest that internal and external articular structure are relatively independent of each other and may be adapted to different aspects of the mechanical environment. Differences in trabecular mass between taxa appear to correspond to differences in the magnitudes of mechanical loads borne by the joint, whereas aritcular volume and surface area are related primarily to differences in joint mobility. Because of the apparent physiological “de-coupling” of articular mass and volume, variations in articular density (mass/volume) are difficult to interpret in isolation. Comparisons of internal and external articular structure may provide new ways to reconstruct the locomotor/positional behavior of extinct taxa. © 1994 Wiley-Liss, Inc.     

Postnatal temporal bone ontogeny in Pan,Gorilla, and Homo,and the implications for temporal bone ontogeny in Australopithecus afarensis

Assessments of temporal bone morphology have played an important role in taxonomic and phylogenetic evaluations of fossil taxa, and recent three‐dimensional analyses of this region have supported the utility of the temporal bone for testing taxonomic and phylogenetic hypotheses. But while clinical analyses have examined aspects of temporal bone ontogeny in humans, the ontogeny of the temporal bone in non‐human taxa is less well documented. This study examines ontogenetic allometry of the temporal bone in order to address several research questions related to the pattern and trajectory of temporal bone shape change during ontogeny in the African apes and humans. We further apply these data to a preliminary analysis of temporal bone ontogeny in Australopithecus afarensis. Three‐dimensional landmarks were digitized on an ontogenetic series of specimens of Homo sapiens, Pan troglodytes, Pan paniscus, and Gorilla gorilla. Data were analyzed using geometric morphometric methods, and shape changes throughout ontogeny in relation to size were compared. Results of these analyses indicate that, despite broadly similar patterns, African apes and humans show marked differences in development of the mandibular fossa and tympanic portions of the temporal bone. These findings indicate divergent, rather than parallel, postnatal ontogenetic allometric trajectories for temporal bone shape in these taxa. The pattern of temporal bone shape change with size exhibited by A. afarensis showed some affinities to that of humans, but was most similar to extant African apes, particularly Gorilla. Am J Phys Anthropol 151:630–642, 2013. © 2013 Wiley Periodicals, Inc.     

Morphological changes in the internal structure of the articular eminence of the temporal bone during growth from deciduous to early mixed dentition

Previously, bio-mechanical studies on the temporomandibular joint have concentrated mainly on the mandibular condyle while the articular eminence has been largely overlooked. Furthermore, research on the mechanical properties of bone using finite element analysis has focused on the cortical bone in preference to cancellous bone. In this study morphorogical changes in the internal structure of the articular eminence as related to child growth were examined using Micro-CT. Morphometric analysis of samples of cancellous bone representing both deciduous and early mixed dentitions showed an increase in the bone volume fraction and trabecular thickness in the early mixed dentition, and finite element analysis indicated directional transmission of stress as well. These results suggest that the morphology of the trabecular bone was altered to adapt to the functional growth progressed from the deciduous to the early mixed dentition.     

Three-dimensional analysis of mandibular morphology in Otolemur

Euclidean distance matrix analysis (EDMA) of three-dimensional data is used here to examine mandibular morphology between two species of galagos. Otolemur crassicaudatus consumes primarily exudates, while O. garnettii is more frugivorous. Acquisition of exudates involves either gouging or scraping tree bark, and may involve different forces at the mandible than incising fruits. Previous studies of mandibular morphology in exudate-feeding primates produced mixed results, some suggesting that morphological specializations reflect adaptations for greater force at the anterior dentition, while others suggest specializations for producing a large gape. This study addresses these controversies by testing predictions associated with O. crassicaudatus generating greater force at the anterior dentition or producing a larger gape relative to O. garnettii. In addition, this study tests predictions associated with specializations of the anterior dentition in O. crassicaudatus as related to exudate-feeding. Crania and mandibles from 28 O. crassicaudatus and 17 O. garnettii were digitized in three dimensions, using 18 landmarks that summarize the shape of the jaw. Two-dimensional measurements were taken to assess incisor robusticity. All three-dimensional data were analyzed using EDMA, and bootstrap tests were executed to identify specific interlandmark differences that were driving any significant (P < 0.05) overall shape differences. Two-dimensional data were analyzed using Student's t-test for independent measures. Results revealed that there was a significant shape difference in mandibles between species, and that mandibles of O. crassicaudatus showed higher condyles, longer mandibles, decreased incisor procumbency, and greater incisor robusticity relative to O. garnettii. It is suggested that the results of the present study reflect adaptations for scraping in O. crassicaudatus rather than gouging.     

Dietary correlates of temporomandibular joint morphology in the great apes

Behavioral observations of great apes have consistently identified differences in feeding behavior among species, and these differences have been linked to variation in masticatory form. As the point at which the mandible and cranium articulate, the temporomandibular joint (TMJ) is an important component of the masticatory apparatus. Forces are transmitted between the mandible and cranium via the TMJ, and this joint helps govern mandibular range of motion. This study examined the extent to which TMJ form covaries with feeding behavior in the great apes by testing a series of biomechanical hypotheses relating to specific components of joint shape using linear measurements extracted from three‐dimensional coordinate data. Results of these analyses found that taxa differ significantly in TMJ shape, particularly in the mandibular fossa. Chimpanzees have relatively more anteroposteriorly elongated joint surfaces, whereas gorillas tend to have relatively anteroposteriorly compressed joints. Orangutans were most commonly intermediate in form between Pan and Gorilla, perhaps reflecting a trade‐off between jaw gape and load resistance capabilities. Importantly, much of the observed variation among taxa reflects differences in morphologies that facilitate gape over force production. These data therefore continue to emphasize the unclear relationship between mandibular loading and bony morphology, but highlight the need for further data regarding food material properties, jaw gape, and ingestive/food processing behaviors. Am J Phys Anthropol, 2013. © 2012 Wiley Periodicals, Inc.     

Bone mineral density in chimpanzees,humans, and Japanese macaques

We performed a comparative study of bone mechanical properties in the radii of chimpanzees (Pan troglodytes), humans (Homo sapiens), and Japanese macaques (Macaca fuscata) using peripheral quantitative computed tomography. We investigated: (1)cortical bone area relative to the total periosteal area (PrA); (2) trabecular bone area relative to PrA; (3) cortical bone density; and (4) trabecular bone density. The cortical bone area index for chimpanzees was almost the same as that of Japanese macaques, whereas the equivalent value in humans was about the two-fifths that of the others. Values for the other three properties were constant among these three catarrhine species. Chimpanzees do not particularly resemble humans, but are more similar to digitigrade macaques in terms of bone properties. The constant trabecular bone area index and trabecular density value in these species may suggest that a certain amount of trabecular bone (20–30% of total bone area at the distal 4% level of the forearm) is necessary to achieve normal bone turnover. The physiological metabolism of bone, including cortical bone density, might be conserved in these catarrhines. Electronic Publication     

The locomotion of Babakotia radofilai inferred from epiphyseal and diaphyseal morphology of the humerus and femur

Palaeopropithecids, or “sloth lemurs,” are a diverse clade of large‐bodied Malagasy subfossil primates characterized by their inferred suspensory positional behavior. The most recently discovered genus of the palaeopropithecids is Babakotia, and it has been described as more arboreal than Mesopropithecus, but less than Palaeopropithecus. In this article, the within‐bone and between‐bones articular and cross‐sectional diaphyseal proportions of the humerus and femur of Babakotia were compared to extant lemurs, Mesopropithecus and Palaeopropithecus in order to further understand its arboreal adaptations. Additionally, a sample of apes and sloths (Choloepus and Bradypus) are included as functional outgroups composed of suspensory adapted primates and non‐primates. Results show that Babakotia and Mesopropithecus both have high humeral/femoral shaft strength proportions, similar to extant great apes and sloths and indicative of forelimb suspensory behavior, with Babakotia more extreme in this regard. All three subfossil taxa have relatively large femoral heads, also associated with suspension in modern taxa. However, Babakotia and Mesopropithecus (but not Palaeopropithecus) have relatively small femoral head surface area to shaft strength proportions suggesting that hind‐limb positioning in these taxa during climbing and other behaviors was different than in extant great apes, involving less mobility. Knee and humeral articular dimensions relative to shaft strengths are small in Babakotia and Mesopropithecus, similar to those found in modern sloths and divergent from those in extant great apes and lemurs, suggesting more sloth‐like use of these joints during locomotion. Mesopropithecus and Babakotia are more similar to Choloepus in humerofemoral head and length proportions while Palaeopropithecus is more similar to Bradypus. These results provide further evidence of the suspensory adaptations of Babakotia and further highlight similarities to both extant suspensory primates and non‐primate slow arboreal climbers and hangers. J. Morphol. 277:1199–1218, 2016. © 2016 Wiley Periodicals, Inc.     

FGFR2功能增强对小鼠下颌骨髁突发育影响

成纤维细胞生长因子受体2(Fibroblast growth factor receptor, FGFR2)是参与调控骨骼发育的重要分子,在调控软骨内成骨过程中发挥着重要作用。为了探讨FGFR2功能增强对小鼠下颌骨髁突生长发育的影响,文章以FGFR2功能增强型点突变(Fgfr2^+/S252W)小鼠为研究对象,采用番红固绿染色研究Fgfr2^+/S252W小鼠下颌骨髁突不同生长发育阶段的组织形态;利用免疫细胞化学染色和实时荧光定量PCR方法检测X型胶原(Col X)在3周龄小鼠髁突肥大软骨细胞中的表达。结果显示,1周龄、3周龄和6周龄突变型小鼠下颌骨髁突的软骨细胞层宽度都比同窝野生型窄,钙化软骨细胞层退化时间早,骨小梁钙化绿染程度深;Col X在突变型小鼠下颌骨髁突的表达高于同窝野生型小鼠(P<0.001)。结果表明,FGFR2功能增强可导致小鼠下颌骨髁突软骨层组织形态异常,抑制髁突软骨内成骨,从而导致下颌骨髁突发育畸形。     

Free body analysis,beam mechanics,and finite element modeling of the mandible of Alligator mississippiensis

The mechanical behavior of mammalian mandibles is well‐studied, but a comprehensive biomechanical analysis (incorporating detailed muscle architecture, accurate material properties, and three‐dimensional mechanical behavior) of an extant archosaur mandible has never been carried out. This makes it unclear how closely models of extant and extinct archosaur mandibles reflect reality and prevents comparisons of structure–function relationships in mammalian and archosaur mandibles. We tested hypotheses regarding the mechanical behavior of the mandible of Alligator mississippiensis by analyzing reaction forces and bending, shear, and torsional stress regimes in six models of varying complexity. Models included free body analysis using basic lever arm mechanics, 2D and 3D beam models, and three high‐resolution finite element models of the Alligator mandible, incorporating, respectively, isotropic bone without sutures, anisotropic bone with sutures, and anisotropic bone with sutures and contact between the mandible and the pterygoid flange. Compared with the beam models, the Alligator finite element models exhibited less spatial variability in dorsoventral bending and sagittal shear stress, as well as lower peak values for these stresses, suggesting that Alligator mandibular morphology is in part designed to reduce these stresses during biting. However, the Alligator models exhibited greater variability in the distribution of mediolateral and torsional stresses than the beam models. Incorporating anisotropic bone material properties and sutures into the model reduced dorsoventral and torsional stresses within the mandible, but led to elevated mediolateral stresses. These mediolateral stresses were mitigated by the addition of a pterygoid‐mandibular contact, suggesting important contributions from, and trade‐offs between, material properties and external constraints in Alligator mandible design. Our results suggest that beam modeling does not accurately represent the mechanical behavior of the Alligator mandible, including important performance metrics such as magnitude and orientation of reaction forces, and mediolateral bending and torsional stress distributions. J.Morphol. 2011. © 2011 Wiley‐Liss, Inc.