Mathematical model for the luminol chemiluminescence reaction catalyzed by peroxidase

A kinetic model that accurately describes intensity vs. time reaction profiles for the chemiluminescence reaction between luminol and hydrogen peroxide, as catalyzed by horseradish perioxdase, is derived and evaluated. A set of three differential equations is derived and solved to provide intensity time information for the first 200 seconds of the reaction. The model accurately predicts intensity-time profiles when literature values are used for all but one of the reaction rate constants. Furthermore, the model predicts a nonlinear curve for plots of light intensity versus the initial hydrogen peroxide concentration. Experimental data confirm that such plots are nonlinear. Finally, a linear double-reciprocal plot is predicted by the model and the experimental data verify this relationship. (c) 1993 Wiley & Sons, Inc.     

The influence of dioxygen on luminol chemiluminescence

Assays of peroxy compounds are commonly performed after chromatographic separation of analysed mixtures. In high‐performance liquid chromatography (HPLC), solvent reservoirs are sparged by helium or inline vacuum‐degassed in order to control the compressibility of the solvents for efficient pumping. In this study, we investigated the influence of degassing the reaction solution on the light output of the hemin‐catalyzed luminol oxidation by various oxidants. We found that, when t‐butyl hydroperoxide, hydrogen peroxide, n‐butyl hydroperoxide, iodosobenzene and iodobenzene diacetate were used as oxidants, the luminol chemiluminescence was lowered by 50–70% compared with an equilibrated and degassed solution. The opposite effect was observed when dibenzoyl peroxide and 3‐chloroperoxybenzoic acid were used as oxidants, as the chemiluminescence increased by approximately 20–30%. The reduced chemiluminescence was explained based on the known role of dioxygen in luminol chemiluminescence. The enhancement of chemiluminescence was rationalized by suggesting an alternative mechanism of luminol oxidation valid for peroxyacids and diacyl peroxides in which the reaction of a peroxyacid anion with the diazaquinone led to light emission with a higher quantum yield than the usual path, which is suppressed by the removal of dioxygen from the reaction solution. Copyright © 2009 John Wiley & Sons, Ltd.     

Automated determination of asulam by enhanced chemiluminescence using luminol/peroxidase system

A flow injection system with chemiluminescence detection for the determination of asulam, enhancer of the system luminol–H₂O₂–horseradish peroxidase, is proposed. The method shows a moderate selectivity against other pesticides usually present in formulations of herbicides and in water. The procedure was applied to the determination of asulam in tap water samples and a recovery study was carried out in order to validate the method. The obtained results show acceptable recovery values (between 88.3 and 93.9%). The detection limit for asulam was 0.12 ng/mL. The precision of the method expressed as relative standard deviation was 1.55% (n = 8), at the 19 ng/mL level. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence determination of gemifloxacin based on diperiodatoargentate (III)‐sulphuric acid reaction in a micellar medium

A novel flow‐injection chemiluminescence (FI‐CL) analysis method for the determination of gemifloxacin in the presence of cetyltrimethylammonium bromide (CTAB) surfactant micelles is described. Strong CL signal was generated during the reaction of gemifloxacin with diperiodatoargentate (III) in a sulfuric acid medium sensitized by CTAB. Under optimum experimental conditions, the CL intensity was linearly related to the concentration of gemifloxacin from 1.0 × 10^‐9 to 3.0 × 10^‐7 g/mL and the detection limit was 7.3 × 10^‐10 g/mL (3σ). The relative standard deviation (RSD) was 1.7 % for a 3.0 × 10^‐8 g/mL gemifloxacin solution (11 repeated measurements). The proposed method was successfully applied to the determination of gemifloxacin in pharmaceutical preparations and biological fluids. The possible mechanism of the CL reaction is also discussed briefly. Copyright © 2012 John Wiley & Sons, Ltd.     

Improvement of mimetic peroxidase activity of gold nanoclusters on the luminol chemiluminescence reaction by surface modification with ethanediamine

Peroxidase is a commonly used catalyst in luminol–H₂O₂ chemiluminescence (CL) reactions. Natural peroxidase has a sophisticated separation process, short shelf life and unstable activity, therefore it is important to develop peroxidases that have both high catalytic activity and good stability as alternatives to the natural enzyme. Gold nanoclusters (Au NCs) are an alternative peroxidase with catalytic activity in the luminol–H₂O₂ CL reaction. In the present study, ethanediamine was modified on the surface of Au NCs forming cationic Au NCs. The zeta potential of the cationic Au NCs maintained its positive charge when the pH of the solution was between 4 and 9. The cationic Au NCs showed higher catalytic activity in the luminol–H₂O₂ CL reaction than did unmodified Au NCs. A mechanism study showed that the better performance of cationic Au NCs may be attributed to the generation of ¹O₂ on the surface of cationic Au NCs and a positive surface charge, for better affinity to luminol. Cationic Au NC, acting as a peroxidase mimic, has much better stability than horseradish peroxidase over a wide range of temperatures. We believe that cationic Au NCs may be useful as an artificial peroxidase for a wide range of potential applications in CL and bioanalysis.     

One‐step synthesis of cationic gold nanoclusters with high catalytic activity on luminol chemiluminescence reaction

The present study reports a one‐step synthesis method for the preparation of cationic gold nanoclusters (Au NCs). Polyethyleneimine (PEI), a positively charged hyperbranched polyamine, was selected as the capping reagent. Glutathione showed a synergistic effect on the formation of the small size of cationic Au NCs. The prepared cationic Au NCs have a size less than 2 nm and carry a positive charge in solution with pH less than 11. The cationic PEI–Au NCs‐triggered luminol chemiluminescence (CL) reactions showed slow and intense CL profiles. The maximum CL intensity can be obtained within 10 min and the CL signal maintained almost the same within 30 min. A linear increase of CL intensity was observed in the presence of an increasing concentration of cationic Au NCs ranging from 0.030 μM to 15 μM. The linear response of the cationic Au NCs in the CL reaction and the glow‐type CL profile make the proposed CL reaction have broad application prospects in the field of biological analysis and CL imaging.     

Studies on PVP hydrogel-supported luminol chemiluminescence: 1. Kinetic and mechanistic aspects using multivariate factorial analysis.

The chemiluminescent oxidation of luminol by hydrogen peroxide in the presence of hemin is revisited in an UV-C cross-linked PVP hydrogel. Chemiluminescence properties such as initial light intensity (I(0)), area of emission (S) and observed rate constants (k(obs)) are studied, varying the concentration of all reactants using a multivariate factorial approach.     

Scavenger effect of flavonols on HOCl-induced luminol chemiluminescence.

Hypochlorous acid (HOCl), the main product of the myeloperoxidase system, is a strong oxidant and a potent chlorinating agent, which can damage host tissues. In the present work, the scavenger effect of three aglycone flavonols (myricetin, quercetin and kaempferol) and of the natural glycoside flavonol, rutin, was studied towards HOCl using luminol-dependent chemiluminescence (CL). At 1 micro mol/L fi nal concentration, rutin was the most powerful scavenger of HOCl with an inhibitory luminol oxidation of 91.4% +/- 3.2%. Quercetin, kaempferol and myricetin inhibited the luminol-dependent CL at the same concentration only by 75.9% +/- 3.4%, 57.7% +/- 5.3% and 43.3% +/- 3.5%, respectively. With increasing concentration of these flavonols, a dose-dependent inhibition of luminol CL was observed. In order to prove to what extent flavonols scavenge HOCl, their concentrations that gave 50% inhibition of luminescence (IC50) were compared to IC50 values of the sulphur-containing compounds N-acetyl cysteine (NAC) and taurine. The scavenging activities of compounds tested decrease in the order: rutin > NAC > quercetin > kaempferol > taurine. The present study revealed that rutin was the most effective scavenger agent.     

The assaying of haemoglobin using luminol chemiluminescence and its application to the dating of human skeletal remains

The luminol chemiluminescence reaction has, for some time, been used as a tool for the detection of haemoglobin at crime scenes. More recently, the luminol test has been suggested as a possible tool for estimating the post‐mortem interval (PMI) of skeletal remains. The preliminary results from the following study indicate that the chemiluminescent luminol test is a relatively easy and economical method for distinguishing between remains of medico‐legal (≤100 years) and historical (>100 years) interest. The femur was the preferred bone for PMI measurements using the luminol test, due to its robustness and relative resistance to diagenesis. Initial results suggest that bone that was historical in nature, produced a demonstrably weaker reaction than that of medico‐legal interest. These results suggest that the luminol test is a promising technique, albeit with some limitations, for the assessment of skeletal material that may be potentially of medico‐legal interest. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of nitrate and nitrite in freshwaters using flow‐injection with luminol chemiluminescence detection

A simple and sensitive flow‐injection (FI) method for the determination of nitrate and nitrite in natural waters, based on luminol chemiluminescence (CL) detection, is reported. Nitrate was reduced online to nitrite via a copperized cadmium (Cu–Cd) column and then reacted with acidic hydrogen peroxide to form peroxynitrous acid. CL emission was observed from the oxidation of luminol in an alkaline medium in the presence of the peroxynitrite anion. The limits of detection (S:N = 3) were 0.02 and 0.01 µg N/L, with sample throughputs of 40 and 90 /h for nitrate and nitrite, respectively. Calibration graphs were linear over the range 0.02–50 and 0.01–50 µg N/L [R² = 0.9984 (n = 8) and R² = 0.9965 (n = 7)] for nitrate and nitrite, respectively, with relative standard deviations (RSDs; n = 3) in the range 1.8–4.6%. The key chemical and physical variables (reagent concentrations, buffer pH, flow rates, sample volume, Cu–Cd reductor column length) were optimized and potential interferences investigated. The effect of cations [Ca(II), Mg(II), Co(II), Fe(II) and Cu(II)] was masked online with EDTA. Common anions (PO₄^3?, SO₄^2? and HCO₃^?) did not interfere at their maximum admissible concentrations in freshwaters. The effect of salinity on the luminol CL reaction with and without nitrate and nitrite (2 and 0.5 µg N/L, respectively) was also investigated. The method was successfully applied to freshwaters and the results obtained were in good agreement with those obtained by an automated segmented flow analyser reference method. Copyright © 2011 John Wiley & Sons, Ltd.     

Nickel oxide hollow microsphere for the chemiluminescence determination of tuberculostatic drug isoniazid

In this article, nickel(II) oxide (NiO) hollow microspheres (HMSs) were fabricated and used to catalyze chemiluminescence (CL) reaction. The studied CL reaction is the luminol-oxygen reaction that was used as a sensitive analytical tool for measuring tuberculostatic drug isoniazid (IND) in pharmaceutical formulations and water samples. The CL method was established based on the suppression impact of IND on the CL reaction. The NiO HMSs were produced by a simple hydrothermal method and characterized by several spectroscopic techniques. The result of essential parameters on the analytical performance of the CL method, including concentrations of sodium hydroxide (NaOH), luminol, and NiO HMSs were investigated. At the optimum conditions, the calibration curve for IND was linear in the range of 8.00 × 10⁻⁷ to 1.00 × 10⁻⁴ mol L⁻¹ (R² = 0.99). A detection limit (3S) of 2.00 × 10⁻⁷ mol L⁻¹ was obtained for this method. The acceptable relative standard deviation (RSD) was obtained for the proposed CL method (2.63%, n = 10) for a 5.00 × 10⁻⁶ mol L⁻¹ IND solution. The mechanism of the CL reaction was also discussed.     

Rapid determination of isoamyl nitrite in pharmaceutical preparations by flow injection analysis with on‐line UV irradiation and luminol chemiluminescence detection

Isoamyl nitrite is used as a therapeutic reagent for cardiac angina and as an antidote for cyanide poisoning, but it is abused because of its euphoric properties. Therefore, a method to determine isoamyl nitrite is required in many fields, including pharmaceutical and forensic studies. In this study, a simple, rapid and sensitive method for the determination of isoamyl nitrite was developed using a flow injection analysis system equipped with a chemiluminescence detector and on‐line photoreactor. This method is based on on‐line ultraviolet irradiation of isoamyl nitrite and subsequent luminol chemiluminescence detection without the addition of an oxidant. A linear standard curve was obtained up to 1.0 μM of isoamyl nitrite with a detection limit (blank + 3SD) of 0.03 μM. The method was successfully applied to determine isoamyl nitrite content in pharmaceutical preparations. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of subnanomolar concentrations of vanadium in environmental water samples using flow injection with luminol chemiluminescence detection

A flow injection chemiluminescence method is described for the determination of subnanomolar concentrations of vanadium in environmental water samples. The procedure is based on the oxidation of luminol in the presence of dissolved oxygen catalyzed by vanadium(IV). Vanadium(V) reduction and preconcentration of vanadium(IV) was carried out using in‐line silver reductor and 8‐hydroxyquinoline chelating columns at pH 3.15, respectively. The calibration graph for vanadium(IV) was linear in the concentration range of 0.025–10 µg/L with relative standard deviation in the range of 0.4–5.58%. The detection limit (3s blank) was 3.8 × 10^?3 µg/L without preconcentration; when the vanadium(IV) was preconcentrated with an 8‐HQ column for 1 min (2.0 mL of sample loaded), the detection limit of 5.1 × 10^?4 µg/L was achieved. One analytical cycle can be completed in 2.0 min. The analysis of certified reference materials (CASS‐4, NASS‐5 and SLRS‐4) by the proposed method showed good agreement with the certified values. The method was successfully applied to the determination of total dissolved vanadium in environmental water samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Evaluation of lophine derivatives as L‐012 (luminol analog)‐dependent chemiluminescence enhancers for measuring horseradish peroxidase and H2O2

8‐Amino‐5‐chloro‐7‐phenylpyrido[3,4‐d]pyridazine‐1,4(2H,3H)dione (L‐012) was recently synthesized as a new chemiluminescence (CL) probe; the light intensity and the sensitivity of L‐012 are higher than those of other CL probes such as luminol. Previously, our group developed four lophine‐based CL enhancers of the horseradish peroxidase (HRP)‐catalyzed CL oxidation of luminol, namely 2‐(4‐hydroxyphenyl)‐4,5‐diphenylimidazole (HDI), 2‐(4‐hydroxyphenyl)‐4,5‐di(2‐pyridyl)imidazole (HPI), 4‐(4,5‐diphenyl‐1H‐imidazol‐2‐yl)phenylboronic acid (DPA), and 4‐[4,5‐di(2‐pyridyl)‐1H‐imidazol‐2‐yl]phenylboronic acid (DPPA), and showed that DPPA was suitable for the photographic detection of HRP. In this study, we replaced luminol with L‐012 and evaluated these as L‐012‐dependent CL enhancers. In addition, to detect HRP and/or H₂O₂ with higher sensitivity, each detection condition for the L‐012–HRP–H₂O₂ enhanced CL was optimized. All the derivatives enhanced the L‐012‐dependent CL as well as luminol CL; HPI generated the highest enhanced luminescence. Under optimized conditions for HRP detection, the detection limit of HRP was 0.08 fmol. By contrast, the detection limit of HRP with the enhanced L‐012‐dependent CL using 4‐iodophenol, which is a common enhancer of luminol CL, was 1.1 fmol. With regard to H₂O₂ detection, the detection limits for enhanced CL with HPI and 4‐iodophenol were 0.29 and 1.5 pmol, respectively. Therefore, it is demonstrated that HPI is the most superior L‐012‐dependent CL enhancer. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.     

Chemiluminescence assay of lipase activity using a synthetic substrate as proenhancer for luminol chemiluminescence reaction.

A novel chemiluminescence (CL) assay method for lipase (triacylglycerol lipase, E.C.3.1.1.3) activity was developed by using the lauric acid ester of 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI) as a substrate. The method is based on the enhanced CL reaction of luminol-hydrogen peroxide-horseradish peroxidase (HRP) with HDI that is liberated from the substrate by enzymatic hydrolysis. To simplify the assay procedure, both the hydrolysis of the substrate and the enhanced CL reaction were performed in the same reaction mixture. Lipases from Candida cylindracea and porcine pancreas were successfully determined with the detection limits (blank signal + 3 SD) of 0.05 and 50.0 mU/tube, respectively. The method is simple and rapid, permitting the completion of single assay within 5 min. The reproducibilities obtained with replicate assays were relative standard deviations (RSDs) of <=> 4.7% for within-day and <=> 6.0% for between-day assays.     

The forensic use of luminol chemiluminescence to detect traces of blood inside motor vehicles.

The luminol test for blood was carried out on a set of interior fittings and surfaces inside three different makes of modern motor car. The surfaces and fittings provided little interference with the test for blood, although there was some detectable chemiluminescence when the test was applied to blood-free material from a seatbelt, a boot-lining and a gear-knob. The case with which haemoglobin samples could be washed off interior car surfaces was also examined for seat fabrics, carpets, roof-linings and various other plastic interior surfaces. A standard wash with water alone was not very effective and removed only ca. 50% of the haemoglobin. A standard wash with soapy water or with a proprietary multipurpose car cleaner removed ca. 90% of the haemoglobin from the tested surface. The effect of high car interior temperatures on haemoglobin samples that were subsequently used in the luminol test was also examined. It was shown that the sensitivity of the luminol test was not decreased but was increased by the prior heating of a haemoglobin sample. This effect was attributed to the thermal conversion of haemoglobin to the more brighter catalyst for chemiluminescence, methaemoglobin. The enthalpy of this conversion in the solid state was found to be 14.1 kJ/mol.     

Influence of different luminols on the characteristics of the chemiluminescence reaction in human neutrophils

In search for a luminol with very high output of light, 20 different luminol samples were tested for their ability to enhance the chemiluminescence reaction in phorbol myristate acetate activated human neutrophils. We found that the majority of luminols tested (17 samples) gave almost the same light output from neutrophils, and that the major part of the activity was from an intracellular origin. Owing to the fact that three isoluminol samples were unable to monitor respiratory burst activity taking place intracellularly, a very low level of chemiluminescence was obtained with these samples. Their light output was, however, greatly increased when horseradish peroxidase or myeloperoxidase was added, showing that the light-generating reaction with isoluminol as well as with luminol is peroxidase-dependent. The fact that isoluminol could also use myeloperoxidase as amplifying peroxidase, suggests that the lack of measurable intracellular activity in the presence of isoluminol is somehow related to a limited or restricted diffusion of the molecule to intracellular sites. The isoluminol system constitutes a sensitive system for measuring release of oxygen metabolites from phagocytic cells.     

Determination of Co(II) in plant tissue by microwave digestion and ion chromatography coupled with luminol/perborate or luminol/percarbonate chemiluminescence detection

Introduction – The cobalt is an essential element for leguminous plants but may be harmful for other species; for that reason determination of Co(II) is very important for the management of polluted areas and for discover plants with capacity for the hyperaccumulation of heavy metals, which has produced a growing necessity of fast, sensitive and selective analytical techniques. Objective – To develop an analytical procedure for the determination of cobalt in plant tissue by coupling the ionic chromatography to the luminol‐based chemiluminescence detection. Methodology – The sample was digested in a mixture of concentrated nitric acid and hydrogen peroxide, using an microwave oven to dissolve the Co(II). The solution containing Co(II) ions was injected to an ionic chromatograph using oxalic acid as the eluent. The detection was based on the catalytic effect of Co(II) on the luminol chemiluminescence using perborate or percarbonate as oxidants. Experimental variables, such as concentrations, pH, flow rates and acid digestion conditions were optimised. Results – Well‐resolved chromatographic peaks were obtained. The height and area showed linear dependences with the Co(II) concentration, which were used to quantify the heavy metal, with recoveries up to 95%. The microwave irradiation (60 s) was sufficient for the complete mineralisation of 200 mg of sample, employing 2 mL of the acid mixture. The method was free from the interferences, requiring less than 12 minutes to complete the analysis. Conclusion – The method was simple and rapid for the determination of cobalt in plant tissue with detection limits comparable to those obtained with more sophisticated and expensive analytical equipments. Copyright © 2010 John Wiley & Sons, Ltd.     

Long‐term chemiluminescence signal is produced in the course of luminol oxidation catalyzed by enhancer‐independent peroxidase purified from Jatropha curcas leaves

Isoenzyme c of horseradish peroxidase (HRP‐C) is widely used in enzyme immunoassay combined with chemiluminescence (CL) detection. For this application, HRP‐C activity measurement is usually based on luminol oxidation in the presence of hydrogen peroxide (H₂O₂). However, this catalysis reaction was enhancer dependent. In this study, we demonstrated that Jatropha curcas peroxidase (JcGP1) showed high efficiency in catalyzing luminol oxidation in the presence of H₂O₂. Compared with HRP‐C, the JcGP1‐induced reaction was enhancer independent, which made the enzyme‐linked immunosorbent assay (ELISA) simpler. In addition, the JcGP1 catalyzed reaction showed a long‐term stable CL signal. We optimized the conditions for JcGP1 catalysis and determined the favorable conditions as follows: 50 mM Tris buffer (pH 8.2) containing 10 mM H₂O₂, 14 mM luminol and 0.75 M NaCl. The optimum catalysis temperature was 30°C. The detection limit of JcGP1 under optimum condition was 0.2 pM. Long‐term stable CL signal combined with enhancer‐independent property indicated that JcGP1 might be a valuable candidate peroxidase for clinical diagnosis and enzyme immunoassay with CL detection. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced chemiluminescence in the oxidation of luminol and an isoluminol cortisol conjugate by hydrogen peroxide in reversed micelles

The chemiluminescent oxidation of luminol and an isoluminol cortisol conjugate (ABICOR) by hydrogen peroxide has been studied in cetyltrimethylammonium bromide (CTAB) reversed micelles in octane-chloroform (1 : 1). The maximum chemiluminescence intensity of both compounds is dependent on the initial concentrations of the H₂O₂ and substrates, the pH value of the micelle polar phase and the H₂O/CTAB ratio. The optimum pH ranged from 8.5 to 9.5. Under comparable conditions, the chemiluminescence intensity for luminol was 15-fold higher than for the ABI-COR conjugate. A mechanism of oxidation of the substrates in reversed micelles is proposed and the possible mechanisms of inhibition by the substrate and oxidant is discussed.