A new strategy for the on-column exopeptidase cleavage of poly-histidine tagged proteins

This paper describes a new strategy, which aims to make on-column poly-histidine tag removal more useful in the production of recombinant proteins by improving the yield and efficiency of on-column exopeptidase cleavage. This involves improvement of the on-column cleavage condition by using imidazole concentrations in the range of 100-500 mM in the cleavage buffer. At 300 mM imidazole, maximum on-column cleavage yield (in excess of 99%) was achieved in 3h of incubation. However, as a result of the increased imidazole concentration, this new strategy of on-column cleavage results in some residual uncleaved poly-histidine tagged proteins (~0.1%) and the production of cleaved dipeptides, both of which need to be further removed in a subsequent step. A method involving the recirculation of recovered proteins and peptides through the immobilized metal affinity chromatography (IMAC) column (same-column recirculation) was found to be superior to subtractive IMAC for the purpose of contaminant clearance. Recovery of the detagged target proteins was achieved using 10 column volumes of recovery buffer, which had the effect of diluting the imidazole concentration to a suitably low level for contaminant removal by same-column recirculation. This strategy was also applicable at a higher adsorbent loading of 10 mg protein/mL adsorbent with an optimal ratio of 200 mU of DAPase per mg of adsorbed tagged maltose binding protein (MBP), giving a cleavage yield of 99.1% in 3 h. Finally, on-column cleavage conditions including the effect of protease concentration and incubation time on the new strategy have been investigated and comparisons are made for different tag removal strategies.     

Removal of poly-histidine fusion tags from recombinant proteins purified by expanded bed adsorption

Enzymatic methods have been used to cleave the C- or N-terminus polyhistidine tags from histidine tagged proteins following expanded bed purification using immobilized metal affinity chromatography (IMAC). This study assesses the use of Factor Xa and a genetically engineered exopeptidase dipeptidyl aminopeptidase-1 (DAPase-1) for the removal of C-terminus and N-terminus polyhistidine tags, respectively. Model proteins consisting of maltose binding protein (MBP) having a C- or N-terminal polyhistidine tag were used. Digestion of the hexahistidine tag of MBP-His(6) by Factor Xa and HT15-MBP by DAPase-1 was successful. The time taken to complete the conversion of MBP-His(6) to MBP was 16 h, as judged by SDS-PAGE and Western blots against anti-His antibody. When the detagged protein was purified using subtractive IMAC, the yield was moderate at 71% although the overall recovery was high at 95%. Likewise, a yield of 79% and a recovery of 97% was obtained when digestion was performed with using "on-column" tag digestion. On-column tag digestion involves cleavage of histidine tag from polyhistidine tagged proteins that are still bound to the IMAC column. Digestion of an N-terminal polyhistidine tag from HT15-MBP (1 mg/mL) by the DAPase-I system was superior to the results obtained with Factor Xa with a higher yield and recovery of 99% and 95%, respectively. The digestion by DAPase-I system was faster and was complete at 5 h as opposed to 16 h for Factor Xa. The detagged MBP proteins were isolated from the digestion mixtures using a simple subtractive IMAC column procedure with the detagged protein appearing in the flowthrough and washing fractions while residual dipeptides and DAPase-I (which was engineered to exhibit a poly-His tail) were adsorbed to the column. FPLC analysis using a MonoS cation exchanger was performed to understand and monitor the progress and time course of DAPase-I digestion of HT15-MBP to MBP. Optimization of process variables such as temperature, protein concentration, and enzyme activity was developed for the DAPase-I digesting system on HT15-MBP to MBP. In short, this study proved that the use of either Factor Xa or DAPase-I for the digestion of polyhistidine tags is simple and efficient and can be carried out under mild reaction conditions.     

Cloning strategy, production and purification of proteins with exopeptidase-cleavable His-tags

Here, we present a cloning strategy for the production of recombinant proteins tagged with a polyhistidine sequence that can be cleaved by the exopeptidase, DAPase. The method can be used with most commonly available vectors and results in the expression of a His-tag protein that can be purified in its native form regardless of its natural sequence. This approach takes advantage of the TAGZyme system for the removal of amino-terminal affinity tags. Tag removal is accomplished either with DAPase (a recombinant dipeptidyl peptidase) alone or in combination with two accessory enzymes, Qcyclase and pGAPase. The system has been used for the production of intracellular proteins in Escherichia coli and can be applied to other expression hosts for the production of secreted proteins or proteins that require post-translational modification. The production of human interleukin 1beta in E. coli is used as an example to illustrate this method. The complete protocol from initial PCR to the production of a detagged protein with its authentic N terminus can be performed within 5 days.     

N‐terminal processing of affinity‐tagged recombinant proteins purified by IMAC procedures

The ability of a new class of metal binding tags to facilitate the purification of recombinant proteins, exemplified by the tagged glutathione S‐transferase and human growth hormone, from Escherichia coli fermentation broths and lysates has been further investigated. These histidine‐containing tags exhibit high affinity for borderline metal ions chelated to the immobilised ligand, 1,4,7‐triazacyclononane (tacn). The use of this tag‐tacn immobilised metal ion affinity chromatography (IMAC) system engenders high selectivity with regard to host cell protein removal and permits facile tag removal from the E. coli‐expressed recombinant protein. In particular, these tags were specifically designed to enable their efficient removal by the dipeptidyl aminopeptidase 1 (DAP‐1), thus capturing the advantages of high substrate specificity and rates of cleavage. MALDI‐TOF MS analysis of the cleaved products from the DAP‐1 digestion of the recombinant N‐terminally tagged proteins confirmed the complete removal of the tag within 4‐12 h under mild experimental conditions. Overall, this study demonstrates that the use of tags specifically designed to target tacn‐based IMAC resins offers a comprehensive and flexible approach for the purification of E. coli‐expressed recombinant proteins, where complete removal of the tag is an essential prerequisite for subsequent application of the purified native proteins in studies aimed at delineating the molecular and cellular basis of specific biological processes. Copyright © 2015 John Wiley & Sons, Ltd.     

Removal of cleavage slow points from affinity tags used in the IMAC purification of recombinant proteins

The complete enzymatic removal of affinity tags from tagged recombinant proteins is often required but can be challenging when slow points for cleavage exist. This study documents a general approach to remove N‐terminal tags from recombinant proteins specifically designed to be efficiently captured by IMAC resins. In particular, site‐directed mutagenesis procedures have been used to modify the amino acid sequence of metal binding tags useful in IMAC purifications of recombinant proteins with the objective to increase cleavage efficiency with the exopeptidase, dipeptidyl aminopeptidase 1. These tags were specifically developed for application with borderline metal ions, such as Ni²⁺ or Cu²⁺ ions, chelated to the immobilized ligands, 1,4,7‐triazacyclononane (tacn) and its analogs. Due to the ability to control cleavage site structure and accessibility via site directed mutagenesis methods, these procedures offer considerable scope to obtain recombinant proteins with authentic native N‐termini, thus avoiding any impact on structural stability, humoral and cellular immune responses, or other biological functions. Collectively, these IMAC‐based methods provide a practical alternative to other procedures for the purification of recombinant proteins with tag removal. Overall, this approach is essentially operating as an integrated down‐stream purification capability.     

Effects of IMAC specific peptide tags on the stability of recombinant green fluorescent protein

Immobilized metal ion affinity chromatography (IMAC) using peptide affinity tags has become a popular tool for protein purification. An important feature dictating the use of a specific affinity tag is whether its structure influences the properties of the target protein to which it is attached. In this work we have studied the influence on protein stability of two novel peptide affinity tags, namely NT1A and HIT2, and compared their effect to the commonly used hexa‐histidine tag, all attached to the C‐terminus of a enhanced green fluorescent protein (eGFP). A comparison of the influence of C‐ or N‐terminal orientation of the tags was also carried out by studying the NT1A tag attached at either terminus of the eGFP. Protein stability was studied utilising guanidine hydrochloride equilibrium unfolding procedures and CD and fluorescence spectroscopy. The novel peptide affinity tags, NT1A and HIT2, and the His₆ tag were found to not affect the stability of eGFP. Although these results are protein specific, they highlight, nevertheless, the need to employ suitable characterisation tools if the impact of a specific peptide tag on the folded status or stability of a recombinant tagged protein, purified by immobilized metal ion affinity chromatographic methods, are to be rigorously evaluated and the appropriate choice of peptide tag made. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

IMAC capture of recombinant protein from unclarified mammalian cell feed streams

Fusion‐tag affinity chromatography is a key technique in recombinant protein purification. Current methods for protein recovery from mammalian cells are hampered by the need for feed stream clarification. We have developed a method for direct capture using immobilized metal affinity chromatography (IMAC) of hexahistidine (His6) tagged proteins from unclarified mammalian cell feed streams. The process employs radial flow chromatography with 300–500 μm diameter agarose resin beads that allow free passage of cells but capture His‐tagged proteins from the feed stream; circumventing expensive and cumbersome centrifugation and/or filtration steps. The method is exemplified by Chinese Hamster Ovary (CHO) cell expression and subsequent recovery of recombinant His‐tagged carcinoembryonic antigen (CEA); a heavily glycosylated and clinically relevant protein. Despite operating at a high NaCl concentration necessary for IMAC binding, cells remained over 96% viable after passage through the column with host cell proteases and DNA detected at ～8 U/mL and 2 ng/μL in column flow‐through, respectively. Recovery of His‐tagged CEA from unclarified feed yielded 71% product recovery. This work provides a basis for direct primary capture of fully glycosylated recombinant proteins from unclarified mammalian cell feed streams. Biotechnol. Bioeng. 2016;113: 130–140. © 2015 Wiley Periodicals, Inc.     

Histidine tag fusion increases expression levels of active recombinant amelogenin in Escherichia coli

Amelogenin is a dental enamel matrix protein involved in formation of dental enamel. In this study, we have expressed two different recombinant murine amelogenins in Escherichia coli: the untagged rM179, and the histidine tagged rp(H)M180, identical to rM179 except that it carries the additional N-terminal sequence MRGSHHHHHHGS. The effects of the histidine tag on expression levels, and on growth properties of the amelogenin expressing cells were studied. Purification of a crude protein extract containing rp(H)M180 was also carried out using IMAC and reverse-phase HPLC. The results of this study showed clearly that both growth properties and amelogenin expression levels were improved for E. coli cells expressing the histidine tagged amelogenin rp(H)M180, compared to cells expressing the untagged amelogenin rM179. The positive effect of the histidine tag on amelogenin expression is proposed to be due to the hydrophilic nature of the histidine tag, generating a more hydrophilic amelogenin, which is more compatible with the host cell. Human osteoblasts treated with the purified rp(H)M180 showed increased levels of secreted osteocalcin, compared to untreated cells. This response was similar to cells treated with enamel matrix derivate, mainly composed by amelogenin, suggesting that the recombinant protein is biologically active. Thus, the histidine tag favors expression and purification of biologically active recombinant amelogenin.     

Two-step metal affinity purification of double-tagged (NusA-His6) fusion proteins

The present purification protocol applies to target proteins that are fused to a double tag, such as NusA-His6, through a linker that includes a protease-recognition sequence. It involves two steps of immobilized metal ion affinity chromatography (IMAC). NusA stabilizes the passenger protein during translation, whereas the His-tag enables affinity purification of the fusion. The eluate resulting from the first IMAC is buffer-exchanged to remove the imidazole and to achieve optimal conditions for the enzymatic cleavage performed by a His-tagged recombinant protease. The digested sample is loaded directly for a second IMAC step and the target protein is selectively recovered in the flow-through. The resin binds residual non-digested fusion protein, double-tagged moiety, protease and any contaminant that bound the affinity resin and was eluted from the first IMAC. The purity of the target protein usually makes a further purification step unnecessary for most of the lab applications. It takes less than 5 hours to purify the protein from a 5 g pellet.     

A dual protease approach for expression and affinity purification of recombinant proteins

We describe a new method for affinity purification of recombinant proteins using a dual protease protocol. Escherichia coli maltose binding protein (MBP) is employed as an N-terminal tag to increase the yield and solubility of its fusion partners. The MBP moiety is then removed by rhinovirus 3C protease, prior to purification, to yield an N-terminally His₆-tagged protein. Proteins that are only temporarily rendered soluble by fusing them to MBP are readily identified at this stage because they will precipitate after the MBP tag is removed by 3C protease. The remaining soluble His₆-tagged protein, if any, is subsequently purified by immobilized metal affinity chromatography (IMAC). Finally, the N-terminal His₆ tag is removed by His₆-tagged tobacco etch virus (TEV) protease to yield the native recombinant protein, and the His₆-tagged contaminants are removed by adsorption during a second round of IMAC, leaving only the untagged recombinant protein in the column effluent. The generic strategy described here saves time and effort by removing insoluble aggregates at an early stage in the process while also reducing the tendency of MBP to “stick” to its fusion partners during affinity purification.     

Immobilized palladium(II) ion affinity chromatography for recovery of recombinant proteins with peptide tags containing histidine and cysteine

Fusion of peptide‐based tags to recombinant proteins is currently one of the most used tools for protein production. Also, immobilized metal ion affinity chromatography (IMAC) has a huge application in protein purification, especially in research labs. The combination of expression systems of recombinant tagged proteins with this robust chromatographic system has become an efficient and rapid tool to produce milligram‐range amounts of proteins. IMAC‐Ni(II) columns have become the natural partners of 6xHis‐tagged proteins. The Ni(II) ion is considered as the best compromise of selectivity and affinity for purification of a recombinant His‐tagged protein. The palladium(II) ion is also able to bind to side chains of amino acids and form ternary complexes with iminodiacetic acid and free amino acids and other sulfur‐containing molecules. In this work, we evaluated two different cysteine‐ and histidine‐containing six amino acid tags linked to the N‐terminal group of green fluorescent protein (GFP) and studied the adsorption and elution conditions using novel eluents. Both cysteine‐containing tagged GFPs were able to bind to IMAC‐Pd(II) matrices and eluted successfully using a low concentration of thiourea solution. The IMAC‐Ni(II) system reaches less than 20% recovery of the cysteine‐containing tagged GFP from a crude homogenate of recombinant Escherichia coli, meanwhile the IMAC‐Pd(II) yields a recovery of 45% with a purification factor of 13. Copyright © 2014 John Wiley & Sons, Ltd.     

Purification of recombinant antigen BmSXP used in panLF rapid kit for lymphatic filariasis

A rapid antibody detection test is very useful for the detection of lymphatic filariasis, especially for certification and surveillance of post-mass drug administration. panLF Rapid kit is suitable for this purpose since it can detect all species of lymphatic filaria. It is based on the detection of anti-filarial IgG4 antibodies that react with recombinant B. malayi antigens, BmR1 and BmSXP. There is an increase demand for the test due to its attributes of being rapid, sensitive and specific results, as well as its field-applicability. The main aim of this paper is to obtain high recovery and purity of recombinant antigen BmSXP via a modified method of immobilized metal affinity chromatography (IMAC). The highest product yield of 11.82 mg/g dry cell weight (DCW) was obtained when IMAC was performed using the optimized protocol of 10 mM imidazole concentration in lysis buffer, 30 mM imidazole concentration in wash buffer, and 10 column volume wash buffer containing 300 mM salt concentration. This gave a 54% protein recovery improvement over the manufacturer's protocol which recorded a product yield of only 7.68 mg/g DCW. The recovered BmSXP recombinant antigen showed good western blot reactivity, high sensitivity (31/32, 97%) and specificity (32/32, 100%) in ELISA, thus attesting to its good purity and quality.     

A heme fusion tag for protein affinity purification and quantification

We report a novel affinity‐based purification method for proteins expressed in Escherichia coli that uses the coordination of a heme tag to an L ‐histidine‐immobilized sepharose (HIS) resin. This approach provides an affinity purification tag visible to the eye, facilitating tracking of the protein. We show that azurin and maltose binding protein are readily purified from cell lysate using the heme tag and HIS resin. Mild conditions are used; heme‐tagged proteins are bound to the HIS resin in phosphate buffer, pH 7.0, and eluted by adding 200–500 mM imidazole or binding buffer at pH 5 or 8. The HIS resin exhibits a low level of nonspecific binding of untagged cellular proteins for the systems studied here. An additional advantage of the heme tag‐HIS method for purification is that the heme tag can be used for protein quantification by using the pyridine hemochrome absorbance method for heme concentration determination.     

Introduction of a (poly)histidine tag in L-lactate dehydrogenase produces a mixture of active and inactive molecules

A (poly)histidine tag was fused to either the N- or the C-terminus of L-lactate dehydrogenase (LDH) of Bacillus stearothermophilus to facilitate purification and immobilization of these enzymes. The C-terminally tagged enzyme displayed lower activity compared both to the wild-type and to the N-terminally tagged variant. The reason for this loss of activity was investigated by affinity chromatography of the enzymes on a 5'-AMP-Sepharose resin and by size-exclusion chromatography. The C-terminally tagged enzyme could be separated into an inactive, unbound fraction and an active, bound fraction. Further differences between the C-terminally tagged enzyme and the N-terminally tagged and wild-type LDH were observed on size-exclusion chromatography of the three enzymes. These data suggest that the introduction of a "his-tag" at the C-terminus may induce misfolding of the LDH and serve as a warning that the introduction of a (poly)histidine tag can produce unforseen changes in a protein.     

Simultaneous determination of phthalate di- and monoesters in poly(vinylchloride) products and human saliva by gas chromatography-mass spectrometry

This paper reports on the selectivity behaviour of tryptic peptides on a Cu(2+)-loaded immobilised metal ion affinity chromatography (IMAC) support. Ovalbumin was chosen as a model protein for investigation of the selection and separation of histidine-containing peptides by IMAC off-line coupled with capillary electrophoresis and matrix-assisted laser desorption ionisation time-of-flight mass spectrometry (MALDI-TOF). Two of five histidine-containing peptides in addition to some non-histidine-containing peptides from a tryptic digest of ovalbumin were captured by IMAC. To separate and purify the selected peptides, the IMAC sample was analysed by capillary zone electrophoresis (CZE). The sample was not separated by capillary zone electrophoresis, therefore, micellar electrokinetic chromatography (MEKC) using 10-75 mM SDS was used. Analysis of IMAC sample by MEKC, using low concentrations of SDS (10 mM) was characterised by MALDI-TOF. When using SDS at 75 mM, the migration times of reversed-phase fractions of the IMAC sample, were used to identify the peaks. One of the two selected histidine-containing peptides with two histidine residues was identified, analysing the sample by CZE or MEKC.     

Purification of <Emphasis Type="Italic">Bm</Emphasis>R1 Recombinant Protein

This paper describes a refinement in the purification step that facilitated the downstream recovery of high purity BmR1 recombinant protein, which is a protein used as a test reagent in the commercialized rapid tests for detection of lymphac filariasis i.e. Brugia Rapid^TM and panLF rapid^TM. Purification was performed by immobilized metal affinity chromatography (IMAC), followed by ion exchange chromatography (IEX). Results showed that a total of 10.27 mg of BmR1 was obtained when IMAC was performed using 20 mM of imidazole and 5 column volume of wash buffer containing 500 mM of NaCl. Purity of the target protein was enhanced when buffer at pH 5.8 was used during the IEX. Two proteins that recurrently appeared below the BmR1 recombinant protein were identified by mass-spectrometry analysis as the same protein, thus they were probably degradation products of BmR1. These strategies improve purity of the target protein to be used in applications such as production of aptamers and monoclonal antibodies.     

Homologous human blood protein separation using immobilized metal affinity chromatography: protein C separation from prothrombin with application to the separation of factor IX and prothrombin.

Protein C (PC) is a natural anticoagulant and antithrombotic present in human blood at a concentration of 4 microg/mL. Its deficiency can result in excessive clotting and thrombosis. Protein C can be obtained from human blood plasma; however, there are other coagulant proteins in blood, including prothrombin (factor II), which is present in relatively large amounts and is one of the most active components. Protein C and prothrombin are homologous proteins with similar biochemical features; therefore, immunoaffinity chromatography is used for their separation. However, this technology is very expensive, protein C recovery and activity is low, and contamination problems with mouse antibody are likely. Immobilized metal affinity chromatography (IMAC) utilizes the protein metal-binding properties for protein separation. Protein C has twelve surface-accessible histidines, which are the major metal-binding groups for IMAC separation. After investigating metal ion-binding properties of protein C, we used an IDA-Cu column to separate protein C and prothrombin. Following protein adsorption to the column, prothrombin was washed out using a sodium phosphate buffer containing 2 mM imidazole and protein C was recovered with 15 mM imidazole in the buffer. The mild elution condition allows a high protein C activity and a high recovery. Also, this technology introduces no immunoglobulins, and it is relatively inexpensive. IMAC could replace the immunoaffinity technology for the large-scale separation of protein C from blood plasma Cohn Fraction IV-1. In addition, this work demonstrates a significant application of this technology for the separation of factor IX from prothrombin. Prothrombin has proven to be a harmful contaminant in factor IX cocktails that have been administered to humans in the treatment of hemophilia B.     

Immobilised metal-ion affinity chromatography purification of histidine-tagged recombinant proteins: a wash step with a low concentration of EDTA

Immobilised metal-ion affinity chromatography (IMAC) is widely used for the purification of recombinant proteins in which a poly-histidine tag is introduced. However, other proteins may also bind to IMAC columns. We describe the use of a washing buffer with a low concentration of EDTA (0.5 mM) for the removal of proteins without histidine tag from IMAC columns. Four histidine-tagged recombinant proteins/protein complexes were purified to homogeneity from cell culture medium of insect cells by using an EDTA washing buffer. The presence of a low concentration of EDTA in washing buffers during IMAC may have a general application in the purification of histidine-tagged proteins.