Isolation and properties of recombinant inulinases from <Emphasis Type="Italic">Aspergillus</Emphasis> sp.

The genes inuA and inu1, encoding two inulinases (32nd glycosyl hydrolase family) from filamentous fungi Aspergillus niger and A. awamori, were cloned into Penicillium canescens recombinant strain. Using chromatographic techniques, endoinulinase InuA (56 kDa, pI 3) and exoinulinase Inu1 (60 kDa, pI 4.3) were purified to homogeneity from the enzymatic complexes of P. canescens new transformants. The properties, such as substrate specificity, pH- and T-optima of activity, stability at different temperatures, influence of cations and anions on the catalytic activity, etc., of both recombinant inulinases were studied.     

A selectivity study of sodium‐dependent glucose cotransporter 2/sodium‐dependent glucose cotransporter 1 inhibitors by molecular modeling

Sodium‐dependent glucose cotransporters (SGLTs) play an important role in glucose reabsorption in the kidney and have been identified as promising targets to treat diabetes. Because of the side effects like glucose and galactose malabsorption by targeting SGLT1, highly selective SGLT2 inhibitors are more promising in the treatment of diabetes. To understand the mechanism of selectivity, we conducted selectivity‐based three‐dimensional quantitative structure–activity relationship studies to highlight the structure requirements for highly selective SGLT2 inhibitors. The best comparative molecular field analysis and comparative molecular similarity indices analysis models showed the noncross‐validated coefficient (r²) of 0.967 and 0.943, respectively. The predicted correlation coefficients (r²_pred) of 0.974 and 0.938 validated the reliability and predictability of these models. Besides, homology models of SGLT2 and SGLT1 were also constructed to investigate the selective mechanism from structure‐based perspective. Molecular dynamics simulation and binding free energy calculation were performed on the systems of a potent and selective compound interacting with SGLT2 and SGLT1 to compare the different binding modes. The simulation results showed that the stretch of the methylthio group on Met241 had an essential effect on the different binding modes between SGLT1 and SGLT2, which was consistent with the three‐dimensional quantitative structure–activity relationship analysis. Hydrogen bond analysis and binding free energy calculation revealed that SGLT2 binding complex was more stable and favorable than SGLT1 complex, which was highly correlated with the experimental results. Our obtained results give useful information for the investigation of the inhibitors' selectivity between SGLT2 and SGLT1 and will help for further development of highly selective SGLT2 inhibitors. Copyright © 2015 John Wiley & Sons, Ltd.     

Identification and characterization of inulinases by bioinformatics analysis of bacterial glycoside hydrolases family 32 (GH32)

The glycoside hydrolase family contains enzymes that break the glycosidic bonds of carbohydrates by hydrolysis. Inulinase is one of the most important industrial enzymes in the family of Glycoside Hydrolases 32 (GH32). In this study, to identify and classify bacterial inulinases initially, 16,002 protein sequences belonging to the GH32 family were obtained using various databases. The inulin-effective enzymes (endoinulinase and exoinulinase) were identified. Eight endoinulinases (EC 3.2.1.7) and 4318 exoinulinases (EC 3.2.1.80) were found. Then, the localization of endoinulinase and exoinulinase enzymes in the cell was predicted. Among them, two extracellular endoinulinases and 1232 extracellular exoinulinases were found. The biochemical properties of 363 enzymes of the genus Arthrobacter, Bacillus, and Streptomyces (most abundant) showed that exoinulinases have an acid isoelectric point up to the neutral range due to their amino acid length. That is, the smaller the protein (336 aa), the more acidic the pI (4.39), and the larger the protein (1207 aa), the pI is in the neutral range (8.84). Also, a negative gravitational index indicates the hydrophilicity of exoinulinases. Finally, considering the biochemical properties affecting protein stability and post-translational changes studies, one enzyme for endoinulinase and 40 enzymes with desirable characteristics were selected to identify their enzyme production sources. To screen and isolate enzyme-containing strains, now with the expansion of databases and the development of bioinformatics tools, it is possible to classify, review and analyze a lot of data related to different enzyme-producing strains. Although, in laboratory studies, a maximum of 20 to 30 strains can be examined. Therefore, when more strains are examined, finally, strains with more stable and efficient enzymes were selected and introduced for laboratory activities. The findings of this study can help researchers to select the appropriate gene source from introduced strains for cloning and expression heterologous inulinase, or to extract native inulinase from introduced strains.     

CONFOLD: Residue‐residue contact‐guided ab initio protein folding

Predicted protein residue–residue contacts can be used to build three‐dimensional models and consequently to predict protein folds from scratch. A considerable amount of effort is currently being spent to improve contact prediction accuracy, whereas few methods are available to construct protein tertiary structures from predicted contacts. Here, we present an ab initio protein folding method to build three‐dimensional models using predicted contacts and secondary structures. Our method first translates contacts and secondary structures into distance, dihedral angle, and hydrogen bond restraints according to a set of new conversion rules, and then provides these restraints as input for a distance geometry algorithm to build tertiary structure models. The initially reconstructed models are used to regenerate a set of physically realistic contact restraints and detect secondary structure patterns, which are then used to reconstruct final structural models. This unique two‐stage modeling approach of integrating contacts and secondary structures improves the quality and accuracy of structural models and in particular generates better β‐sheets than other algorithms. We validate our method on two standard benchmark datasets using true contacts and secondary structures. Our method improves TM‐score of reconstructed protein models by 45% and 42% over the existing method on the two datasets, respectively. On the dataset for benchmarking reconstructions methods with predicted contacts and secondary structures, the average TM‐score of best models reconstructed by our method is 0.59, 5.5% higher than the existing method. The CONFOLD web server is available at http://protein.rnet.missouri.edu/confold/ . Proteins 2015; 83:1436–1449. © 2015 Wiley Periodicals, Inc.     

Molecular architectures of Pen and Pal: Key enzymes required for CMP‐pseudaminic acid biosynthesis in Bacillus thuringiensis

Bacillus thuringiensis is a soil‐dwelling Gram positive bacterium that has been utilized as a biopesticide for well over 60 years. It is known to contain flagella that are important for motility. One of the proteins found in flagella is flagellin, which is post‐translationally modified by O‐glycosylation with derivatives of pseudaminic acid. The biosynthetic pathway for the production of CMP‐pseudaminic acid in B. thuringiensis, starting with UDP‐N‐acetyl‐d ‐glucosamine (UDP‐GlcNAc), requires seven enzymes. Here, we report the three‐dimensional structures of Pen and Pal, which catalyze the first and second steps, respectively. Pen contains a tightly bound NADP(H) cofactor whereas Pal is isolated with bound NAD(H). For the X‐ray analysis of Pen, the site‐directed D128N/K129A mutant variant was prepared in order to trap its substrate, UDP‐GlcNAc, into the active site. Pen adopts a hexameric quaternary structure with each subunit showing the bilobal architecture observed for members of the short‐chain dehydrogenase/reductase superfamily. The hexameric quaternary structure is atypical for most members of the superfamily. The structure of Pal was determined in the presence of UDP. Pal adopts the more typical dimeric quaternary structure. Taken together, Pen and Pal catalyze the conversion of UDP‐GlcNAc to UDP‐4‐keto‐6‐deoxy‐l ‐N‐acetylaltrosamine. Strikingly, in Gram negative bacteria such as Campylobacter jejuni and Helicobacter pylori, only a single enzyme (FlaA1) is required for the production of UDP‐4‐keto‐6‐deoxy‐l ‐N‐acetylaltrosamine. A comparison of Pen and Pal with FlaA1 reveals differences that may explain why FlaA1 is a bifunctional enzyme whereas Pen and Pal catalyze the individual steps leading to the formation of the UDP‐sugar product. This investigation represents the first structural analysis of the enzymes in B. thuringiensis that are required for CMP‐pseudaminic acid formation.     

Crystal structure of Jararacussin‐I: The highly negatively charged catalytic interface contributes to macromolecular selectivity in snake venom thrombin‐like enzymes

Snake venom serine proteinases (SVSPs) are hemostatically active toxins that perturb the maintenance and regulation of both the blood coagulation cascade and fibrinolytic feedback system at specific points, and hence, are widely used as tools in pharmacological and clinical diagnosis. The crystal structure of a thrombin‐like enzyme (TLE) from Bothrops jararacussu venom (Jararacussin‐I) was determined at 2.48 Å resolution. This is the first crystal structure of a TLE and allows structural comparisons with both the Agkistrodon contortrix contortrix Protein C Activator and the Trimeresurus stejnegeri plasminogen activator. Despite the highly conserved overall fold, significant differences in the amino acid compositions and three‐dimensional conformations of the loops surrounding the active site significantly alter the molecular topography and charge distribution profile of the catalytic interface. In contrast to other SVSPs, the catalytic interface of Jararacussin‐I is highly negatively charged, which contributes to its unique macromolecular selectivity.     

Insight into a strategy for attenuating AmpC‐mediated β‐lactam resistance: Structural basis for selective inhibition of the glycoside hydrolase NagZ

NagZ is an exo‐N‐acetyl‐β‐glucosaminidase, found within Gram‐negative bacteria, that acts in the peptidoglycan recycling pathway to cleave N‐acetylglucosamine residues off peptidoglycan fragments. This activity is required for resistance to cephalosporins mediated by inducible AmpC β‐lactamase. NagZ uses a catalytic mechanism involving a covalent glycosyl enzyme intermediate, unlike that of the human exo‐N‐acetyl‐β‐glucosaminidases: O‐GlcNAcase and the β‐hexosaminidase isoenzymes. These latter enzymes, which remove GlcNAc from glycoconjugates, use a neighboring‐group catalytic mechanism that proceeds through an oxazoline intermediate. Exploiting these mechanistic differences we previously developed 2‐N‐acyl derivatives of O‐(2‐acetamido‐2‐deoxy‐D ‐glucopyranosylidene)amino‐N‐phenylcarbamate (PUGNAc), which selectively inhibits NagZ over the functionally related human enzymes and attenuate antibiotic resistance in Gram‐negatives that harbor inducible AmpC. To understand the structural basis for the selectivity of these inhibitors for NagZ, we have determined its crystallographic structure in complex with N‐valeryl‐PUGNAc, the most selective known inhibitor of NagZ over both the human β‐hexosaminidases and O‐GlcNAcase. The selectivity stems from the five‐carbon acyl chain of N‐valeryl‐PUGNAc, which we found ordered within the enzyme active site. In contrast, a structure determination of a human O‐GlcNAcase homologue bound to a related inhibitor N‐butyryl‐PUGNAc, which bears a four‐carbon chain and is selective for both NagZ and O‐GlcNAcase over the human β‐hexosamnidases, reveals that this inhibitor induces several conformational changes in the active site of this O‐GlcNAcase homologue. A comparison of these complexes, and with the human β‐hexosaminidases, reveals how selectivity for NagZ can be engineered by altering the 2‐N‐acyl substituent of PUGNAc to develop inhibitors that repress AmpC mediated β‐lactam resistance.     

Crystal structure of a feruloyl esterase belonging to the tannase family: A disulfide bond near a catalytic triad

Feruloyl esterase (FAE) catalyzes the hydrolysis of the ferulic and diferulic acids present in plant cell wall polysaccharides, and tannase catalyzes the hydrolysis of tannins to release gallic acid. The fungal tannase family in the ESTHER database contains various enzymes, including FAEs and tannases. Despite the importance of FAEs and tannases in bioindustrial applications, three‐dimensional structures of the fungal tannase family members have been unknown. Here, we determined the crystal structure of FAE B from Aspergillus oryzae (AoFaeB), which belongs to the fungal tannase family, at 1.5 Å resolution. AoFaeB consists of a catalytic α/β‐hydrolase fold domain and a large lid domain, and the latter has a novel fold. To estimate probable binding models of substrates in AoFaeB, an automated docking analysis was performed. In the active site pocket of AoFaeB, residues responsible for the substrate specificity of the FAE activity were identified. The catalytic triad of AoFaeB comprises Ser203, Asp417, and His457, and the serine and histidine residues are directly connected by a disulfide bond of the neighboring cysteine residues, Cys202 and Cys458. This structural feature, the “CS‐D‐HC motif,” is unprecedented in serine hydrolases. A mutational analysis indicated that the novel structural motif plays essential roles in the function of the active site. Proteins 2014; 82:2857–2867. © 2014 Wiley Periodicals, Inc.     

Three‐dimensional structure of a sugar N‐formyltransferase from Francisella tularensis

N‐formylated sugars have been observed on the O‐antigens of such pathogenic Gram‐negative bacteria as Campylobacter jejuni and Francisella tularensis. Until recently, however, little was known regarding the overall molecular architectures of the N‐formyltransferases that are required for the biosynthesis of these unusual sugars. Here we demonstrate that the protein encoded by the wbtj gene from F. tularensis is an N‐formyltransferase that functions on dTDP‐4‐amino‐4,6‐dideoxy‐d ‐glucose as its substrate. The enzyme, hereafter referred to as WbtJ, demonstrates a strict requirement for N¹⁰‐formyltetrahydrofolate as its carbon source. In addition to the kinetic analysis, the three‐dimensional structure of the enzyme was solved in the presence of dTDP‐sugar ligands to a nominal resolution of 2.1 Å. Each subunit of the dimeric enzyme is dominated by a “core” domain defined by Met 1 to Ser 185. This core motif harbors the active site residues. Following the core domain, the last 56 residues fold into two α‐helices and a β‐hairpin motif. The hairpin motif is responsible primarily for the subunit:subunit interface, which is characterized by a rather hydrophobic pocket. From the study presented here, it is now known that WbtJ functions on C‐4′ amino sugars. Another enzyme recently investigated in the laboratory, WlaRD, formylates only C‐3′ amino sugars. Strikingly, the quaternary structures of WbtJ and WlaRD are remarkably different. In addition, there are several significant variations in the side chains that line their active site pockets, which may be important for substrate specificity. Details concerning the kinetic and structural properties of WbtJ are presented.     

Production of fructose from inulin using mixed inulinases from <Emphasis Type="Italic">Aspergillus niger</Emphasis> and <Emphasis Type="Italic">Candida guilliermondii</Emphasis>

Two new effective microbial producers of inulinases were isolated from Jerusalem artichoke tubers grown in Thailand and identified as Aspergillus niger TISTR 3570 and Candida guilliermondii TISTR 5844. The inulinases produced by both these microorganisms were appropriate for hydrolysing inulin to fructose as the principal product. An initial inulin concentration of ∼100 g l⁻¹ and the enzyme concentration of 0.2 U g⁻¹ of substrate, yielded 37.5 g l⁻¹ of fructose in 20 h at 40°C when A. niger TISTR 3570 inulinase was the biocatalyst. The yield of fructose on inulin was 0.39 g g⁻¹. Under identical conditions, the yeast inulinase afforded 35.3 g l⁻¹ of fructose in 25 h. The fructose yield was 0.35 g g⁻¹ of substrate. The fructose productivities were 1.9 g l⁻¹ h⁻¹ and 1.4 g l⁻¹ h⁻¹ for the mold and yeast enzymes, respectively. After 20 h of reaction, the mold enzyme hydrolysate contained 53% fructose and more than 41% of initial inulin had been hydrolysed. Using the yeast enzymes, the hydrolysate contained nearly 38% fructose at 25 h and nearly 36% of initial inulin had been hydrolysed. The A. niger TISTR 3570 inulinases exhibited both endo-inulinase and exo-inulinase activities. In contrast, the yeast inulinases displayed mainly exo-inulinase activity. The mold and yeast crude inulinases mixed in the activity ratio of 5:1 proved superior to individual crude inulinases in hydrolysing inulin to fructose. The enzyme mixture provided a better combination of endo- and exo-inulinase activities than did the crude extracts of either the mold or the yeast individually.     

Crystal structure of norcoclaurine‐6‐O‐methyltransferase,a key rate‐limiting step in the synthesis of benzylisoquinoline alkaloids

Growing pharmaceutical interest in benzylisoquinoline alkaloids (BIA) coupled with their chemical complexity make metabolic engineering of microbes to create alternative platforms of production an increasingly attractive proposition. However, precise knowledge of rate‐limiting enzymes and negative feedback inhibition by end‐products of BIA metabolism is of paramount importance for this emerging field of synthetic biology. In this work we report the structural characterization of (S)‐norcoclaurine‐6‐O‐methyltransferase (6OMT), a key rate‐limiting step enzyme involved in the synthesis of reticuline, the final intermediate to be shared between the different end‐products of BIA metabolism, such as morphine, papaverine, berberine and sanguinarine. Four different crystal structures of the enzyme from Thalictrum flavum (Tf 6OMT) were solved: the apoenzyme, the complex with S‐adenosyl‐l ‐homocysteine (SAH), the complexe with SAH and the substrate and the complex with SAH and a feedback inhibitor, sanguinarine. The Tf 6OMT structural study provides a molecular understanding of its substrate specificity, active site structure and reaction mechanism. This study also clarifies the inhibition of Tf 6OMT by previously suggested feedback inhibitors. It reveals its high and time‐dependent sensitivity toward sanguinarine.     

VCD studies on cyclic peptides assembled from L‐α‐amino acids and a trans‐2‐aminocyclopentane‐ or trans‐2‐aminocyclohexane carboxylic acid

The increasing interest in peptidomimetics of biological relevance prompted us to synthesize a series of cyclic peptides comprising trans‐2‐aminocyclohexane carboxylic acid (Achc) or trans‐2‐aminocyclopentane carboxylic acid (Acpc). NMR experiments in combination with MD calculations were performed to investigate the three‐dimensional structure of the cyclic peptides. These data were compared to the conformational information obtained by electronic circular dichroism (ECD) and vibrational circular dichroism (VCD) spectroscopy. Experimental VCD spectra were compared to theoretical VCD spectra computed quantum chemically at B3LYP/6‐31G(d) density functional theory (DFT) level. The good agreement between the structural features derived from the VCD spectra and the NMR‐based structures underlines the applicability of VCD in studying the conformation of small cyclic peptides. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Misannotations of the genes encoding sugar N‐formyltransferases

Tens of thousands of bacterial genome sequences are now known due to the development of rapid and inexpensive sequencing technologies. An important key in utilizing these vast amounts of data in a biologically meaningful way is to infer the function of the proteins encoded in the genomes via bioinformatics techniques. Whereas these approaches are absolutely critical to the annotation of gene function, there are still issues of misidentifications, which must be experimentally corrected. For example, many of the bacterial DNA sequences encoding sugar N‐formyltransferases have been annotated as l ‐methionyl‐tRNA transferases in the databases. These mistakes may be due in part to the fact that until recently the structures and functions of these enzymes were not well known. Herein we describe the misannotation of two genes, WP_088211966.1 and WP_096244125.1, from Shewanella spp. and Pseudomonas congelans, respectively. Although the proteins encoded by these genes were originally suggested to function as l ‐methionyl‐tRNA transferases, we demonstrate that they actually catalyze the conversion of dTDP‐4‐amino‐4,6‐dideoxy‐d ‐glucose to dTDP‐4‐formamido‐4,6‐dideoxy‐d ‐glucose utilizing N¹⁰‐formyltetrahydrofolate as the carbon source. For this analysis, the genes encoding these enzymes were cloned and the corresponding proteins purified. X‐ray structures of the two proteins were determined to high resolution and kinetic analyses were conducted. Both enzymes display classical Michaelis–Menten kinetics and adopt the characteristic three‐dimensional structural fold previously observed for other sugar N‐formyltransferases. The results presented herein will aid in the future annotation of these fascinating enzymes.     

Expression of exo‐inulinase gene from Aspergillus niger 12 in E. coli strain Rosetta‐gami B (DE3) and its characterization

Inulin is a linear carbohydrate polymer of fructose subunits (2‐60) with terminal glucose units, produced as carbon storage in selected plants. It cannot directly be taken up by most microorganisms due to its large size, unless prior hydrolysis through inulinase enzymes occurs. The hydrolyzed inulin can be taken up by microbes and/or recovered and used industrially for the production of high fructose syrup, inulo‐oligosaccharides, biofuel, and nutraceuticals. Cell‐free enzymatic hydrolysis would be desirable for industrial applications, hence the recombinant expression, purification and characterization of an Aspergillus niger derived exo‐inulinase was investigated in this study. The eukaroyototic exo‐inulinase of Aspergillus niger 12 has been expressed, for the first time, in an E. coli strain [Rosetta‐gami B (DE3)]. The molecular weight of recombinant exo‐inulinase was estimated to be ～81 kDa. The values of K_m and V_max of the recombinant exo‐inulinase toward inulin were 5.3 ± 1.1 mM and 402.1 ± 53.1 µmol min^?1 mg^?1 protein, respectively. Towards sucrose the corresponding values were 12.20 ± 1.6 mM and 902.8 ± 40.2 µmol min^?1 mg^?1 protein towards sucrose. The S/I ratio was 2.24 ± 0.7, which is in the range of native inulinase. The optimum temperature and pH of the recombinant exo‐inulinase towards inulin was 55°C and 5.0, while they were 50°C and 5.5 towards sucrose. The recombinant exo‐inulinase activity towards inulin was enhanced by Cu²⁺ and reduced by Fe²⁺, while its activity towards sucrose was enhanced by Co²⁺ and reduced by Zn²⁺. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:629–637, 2016     

Structures of Arg‐ and Gln‐type bacterial cysteine dioxygenase homologs

In some bacteria, cysteine is converted to cysteine sulfinic acid by cysteine dioxygenases (CDO) that are only ～15–30% identical in sequence to mammalian CDOs. Among bacterial proteins having this range of sequence similarity to mammalian CDO are some that conserve an active site Arg residue (“Arg‐type” enzymes) and some having a Gln substituted for this Arg (“Gln‐type” enzymes). Here, we describe a structure from each of these enzyme types by analyzing structures originally solved by structural genomics groups but not published: a Bacillus subtilis “Arg‐type” enzyme that has cysteine dioxygenase activity (BsCDO), and a Ralstonia eutropha “Gln‐type” CDO homolog of uncharacterized activity (ReCDOhom). The BsCDO active site is well conserved with mammalian CDO, and a cysteine complex captured in the active site confirms that the cysteine binding mode is also similar. The ReCDOhom structure reveals a new active site Arg residue that is hydrogen bonding to an iron‐bound diatomic molecule we have interpreted as dioxygen. Notably, the Arg position is not compatible with the mode of Cys binding seen in both rat CDO and BsCDO. As sequence alignments show that this newly discovered active site Arg is well conserved among “Gln‐type” CDO enzymes, we conclude that the “Gln‐type” CDO homologs are not authentic CDOs but will have substrate specificity more similar to 3‐mercaptopropionate dioxygenases.     

Kinetic characterization of galacto‐oligosaccharide (GOS) synthesis by three commercially important β‐galactosidases

Many β‐galactosidases show large differences in galacto‐oligosaccharide (GOS) production and lactose hydrolysis. In this study, a kinetic model is developed in which the effect of lactose, glucose, galactose, and oligosaccharides on the oNPG converting activity of various β‐galactosidases is quantified. The use of oNPG as a competing substrate to lactose yields more information than can be obtained by examining only the conversion of lactose itself. The reaction rate with lactose or oligosaccharides as substrate relative to that with water as acceptor is much higher for the β‐galactosidase of Bacillus circulans than the β‐galactosidases of Aspergillus oryzae and Kluyveromyces lactis. In addition, the β‐galactosidase of B.circulans has a high reaction rate with galactose as acceptor, in contrast to those of A. oryzae and K. lactis. The latter two are strongly inhibited by galactose. These differences explain why β‐galactosidase of B. circulans gives higher yields in GOS production than other β‐galactosidases. Many of the reaction rate constants for the β‐galactosidase isoforms of B. circulans increase with increasing molecular weight of the isoform. This indicates that the largest isoform β‐gal‐A is most active in GOS production. However, its hydrolysis rate is also much higher than that of the other isoforms, which results in a faster hydrolysis of oligosaccharides as well. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:38–47, 2014     

Structural studies on KijD1, a sugar C‐3′‐methyltransferase

Kijanimicin is an antitumor antibiotic isolated from Actinomadura kijaniata. It is composed of three distinct moieties: a pentacyclic core, a monosaccharide referred to as d ‐kijanose, and a tetrasaccharide chain composed of l ‐digitoxose units. d ‐Kijanose is a highly unusual nitro‐containing tetradeoxysugar, which requires at least ten enzymes for its production. Here we describe a structural analysis of one of these enzymes, namely KijD1, which functions as a C‐3′‐methyltransferase using S‐adenosylmethionine as its cofactor. For this investigation, two ternary complexes of KijD1, determined in the presence of S‐adenosylhomocysteine (SAH) and dTDP or SAH and dTDP‐3‐amino‐2,3,6‐trideoxy‐4‐keto‐3‐methyl‐d ‐glucose, were solved to 1.7 or 1.6 Å resolution, respectively. Unexpectedly, these structures, as well as additional biochemical analyses, demonstrated that the quaternary structure of KijD1 is a dimer. Indeed, this is in sharp contrast to that previously observed for the sugar C‐3′‐methyltransferase isolated from Micromonospora chalcea. By the judicious use of site‐directed mutagenesis, it was possible to convert the dimeric form of KijD1 into a monomeric version. The quaternary structure of KijD1 could not have been deduced based solely on bioinformatics approaches, and thus this investigation highlights the continuing need for experimental validation.     

Structural determinants in bacterial 2‐keto‐3‐deoxy‐D‐gluconate dehydrogenase KduD for dual‐coenzyme specificity

Short‐chain dehydrogenase/reductase (SDR) is distributed in many organisms, from bacteria to humans, and has significant roles in metabolism of carbohydrates, lipids, amino acids, and other biomolecules. An important intermediate in acidic polysaccharide metabolism is 2‐keto‐3‐deoxy‐d ‐gluconate (KDG). Recently, two short and long loops in Sphingomonas KDG‐producing SDR enzymes (NADPH‐dependent A1‐R and NADH‐dependent A1‐R′) involved in alginate metabolism were shown to be crucial for NADPH or NADH coenzyme specificity. Two SDR family enzymes—KduD from Pectobacterium carotovorum (PcaKduD) and DhuD from Streptococcus pyogenes (SpyDhuD)—prefer NADH as coenzyme, although only PcaKduD can utilize both NADPH and NADH. Both enzymes reduce 2,5‐diketo‐3‐deoxy‐d ‐gluconate to produce KDG. Tertiary and quaternary structures of SpyDhuD and PcaKduD and its complex with NADH were determined at high resolution (approximately 1.6 Å) by X‐ray crystallography. Both PcaKduD and SpyDhuD consist of a three‐layered structure, α/β/α, with a coenzyme‐binding site in the Rossmann fold; similar to enzymes A1‐R and A1‐R′, both arrange the two short and long loops close to the coenzyme‐binding site. The primary structures of the two loops in PcaKduD and SpyDhuD were similar to those in A1‐R′ but not A1‐R. Charge neutrality and moderate space at the binding site of the nucleoside ribose 2′ coenzyme region were determined to be structurally crucial for dual‐coenzyme specificity in PcaKduD by structural comparison of the NADH‐ and NADPH‐specific SDR enzymes. The corresponding site in SpyDhuD was negatively charged and spatially shallow. This is the first reported study on structural determinants in SDR family KduD related to dual‐coenzyme specificity. Proteins 2016; 84:934–947. © 2016 Wiley Periodicals, Inc.     

Potential anti‐bacterial drug target: Structural characterization of 3,4‐dihydroxy‐2‐butanone‐4‐phosphate synthase from Salmonella typhimurium LT2

3,4‐Dihydroxy‐2‐butanone‐4‐phosphate synthase (DHBPS) encoded by ribB gene is one of the first enzymes in riboflavin biosynthesis pathway and catalyzes the conversion of ribulose‐5‐phosphate (Ru5P) to 3,4‐dihydroxy‐2‐butanone‐4‐phosphate and formate. DHBPS is an attractive target for developing anti‐bacterial drugs as this enzyme is essential for pathogens, but absent in humans. The recombinant DHBPS enzyme of Salmonella requires magnesium ion for its activity and catalyzes the formation of 3,4‐dihydroxy‐2‐butanone‐4‐phosphate from Ru5P at a rate of 199 nmol min^?1 mg^?1 with K_m value of 116 μM at 37°C. Further, we have determined the crystal structures of Salmonella DHBPS in complex with sulfate, Ru5P and sulfate‐zinc ion at a resolution of 2.80, 2.52, and 1.86 Å, respectively. Analysis of these crystal structures reveals that the acidic loop (residues 34–39) responsible for the acid‐base catalysis is disordered in the absence of substrate or metal ion at the active site. Upon binding either substrate or sulfate and metal ions, the acidic loop becomes stabilized, adopts a closed conformation and interacts with the substrate. Our structure for the first time reveals that binding of substrate Ru5P alone is sufficient for the stabilization of the acidic active site loop into a closed conformation. In addition, the Glu38 residue from the acidic active site loop undergoes a conformational change upon Ru5P binding, which helps in positioning the second metal ion that stabilizes the Ru5P and the reaction intermediates. This is the first structural report of DHBPS in complex with either substrate or metal ion from any eubacteria. Proteins 2010. © 2010 Wiley‐Liss, Inc.