Real‐time detection of single‐living pancreatic β‐cell by laser tweezers Raman spectroscopy: High glucose stimulation

Glucose acts as a β‐cell stimulus factor and leads to cellular responses that involve a large amount of biomolecule formation, relocation, and transformation. We hypothesize that information about these changes can be obtained in real‐time by laser tweezers Raman spectroscopy. To test this hypothesis, repeated measurements designs in accordance with the application of Raman spectroscopy detection were used in the current experiment. Single rat β‐cells were measured by Raman spectroscopy in 2.8 mmol/l glucose culture medium as a basal condition. After stimulation with high glucose (20 mmol/l), the same cells were measured continuously. Each cell was monitored over a total time span of 25 min, in 5 min intervals. During this period of time, cells were maintained at an appropriate temperature controlled by an automatic heater, to provide near‐physiological conditions. It was found that some significant spectral changes induced by glucose were taking place during the stimulation time course. The most noticeable changes were the increase of spectral intensity at the 1002, 1085, 1445, and 1655 cm^?1 peaks, mainly corresponding to protein and lipid. We speculate that these changes might have to do with β‐cell protein and lipid synthesis. Using laser tweezers Raman spectroscopy in combination with glucose stimulation, optical spectral information from rat β‐cells was received and analyzed. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 587–594, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Hairpin ribozyme catalysis: A surface‐enhanced Raman spectroscopy study

The existence of an “RNA world” as an early step in the history of life increases the interest for the characterization of these biomolecules. The hairpin ribozyme studied here is a self‐cleaving/ligating motif found in the minus strand of the satellite RNA associated with Tobacco ringspot virus. Surface‐enhanced Raman spectroscopy (SERS) is a powerful tool to study trace amounts of RNA. In controlled conditions, a SERS signal is proportional to the amount of free residues adsorbed on the metal surface. On RNA cleavage, residues are unpaired and free to interact with metal. SERS procedures are used to monitor and quantify the catalysis of ribozyme cleavage at biological concentrations in real time; thus, they propose an interesting alternative to electrophoretic methods. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 384–390, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Effect of pH on molecular constitution and distribution of hemoglobin in living erythrocyte

The molecular constitution of in situ hemoglobin (Hb) and their distribution in living erythrocyte were investigated versus pH using the technique of confocal Raman microscopy. Both Raman point spectra and line mapping measurements were performed on living erythrocytes in suspensions with pH values from 4.82 to 9.70. It was found that the Hb inside a living erythrocyte would dissociate into monomer/dimer when the cells are in low and high pH environments. In contrast to the homogeneous distribution of the Hbs in the cells in neutral suspension, there are more Hbs distributing around the cell membrane or binding to the membrane as pH increases. While in low pH, as the cell become spherical, most of the Hbs distribute to the central part of the cell. In summary, our investigation suggests that the variation of the external pH not only brings changes in the morphology and membrane structure of an erythrocyte, but also affects the constitution and distribution of its intracellular Hbs, thereby the flexibility of the cell membrane and the oxygenation ability of the Hb. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 348–354, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Confocal Raman microscopy on single living young and old erythrocytes

Raman confocal microscopy, including the techniques of point Raman spectra, line mapping, 2D mapping, and time-dependent spectrum monitoring performed with 514.5 nm excitation light, was used in a comparative study on the distribution and oxidation states of hemoglobin (Hb) in young and old mature erythrocytes. It is demonstrated that in contrast to the homogeneous distribution of the Hb in young cells, there are more Hb distribution around the cell membrane in old erythrocyte. The proteins exhibit some extent of aggregation and conformational change, present less ability of oxidation, and lower oxygenation speed than the Hb in young erythrocytes. Our results also provide the first direct evidence of some intermediate oxygenated states of Hb between the two fully oxygenated (R) and deoxygenated (T) states in living erythrocyte, and give detail information about the conformational change of the intracellular Hb with time during the reoxygenation process. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 951-959, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Dynamics of the Antimicrobial Peptide PGLa Action on Escherichia coli Monitored by Atomic Force Microscopy

Summary Atomic force microscopy (AFM) images of living cells in physiological solution were used to monitor the different stages involved in the interaction between Escherichia coli and the antimicrobial peptide PGLa. Damage on bacterial membranes was observed in the past using standard electron microscopy; stiffness measurements and images scanned in physiological solution demonstrate the advantage of AFM for such studies. From force versus separation curve measurements it is possible to determine the variation of the cellular stiffness. PGLa action on components of the cell structure like the outer membrane, the bacterial pili, the peptidoglycan wall and the inner membrane was determined by the comparison of AFM images of bacteria before and after PGLa addition. The interaction of Escherichia coli with PGLa in the culture medium has two stages. The first is characterized by the loss of surface stiffness and the formation of micelles probably originating from the disruption of the outer membrane and the loss of the bacteria’s ability to adhere to the substrates. In the second stage there is further damage, which resulted in total cell rupture. AFM images of bacteria in air and surface roughness measurements were also used to estimate peptide damage.     

Hsp90 and co‐chaperones twist the functions of diverse client proteins

Hsp90 molecular chaperones are required for the stability and activity of a diverse range of client proteins that have critical roles in signal transduction, cellular trafficking, chromatin remodeling, cell growth, differentiation, and reproduction. Mammalian cells contain three types of Hsp90s: cytosolic Hsp90, mitochondrial Trap‐1, and Grp94 of the endoplasmic reticulum. Each of the Hsp90s, as well as the bacterial homolog, HtpG, hydrolyze ATP and undergo similar conformational changes. Unlike the other forms of Hsp90, cytosolic Hsp90 function is dependent on a battery of co‐chaperone proteins that regulate the ATPase activity of Hsp90 or direct Hsp90 to interact with specific client proteins. This review will summarize what is known about Hsp90's ability to mediate the folding and activation of diverse client proteins that contribute to human diseases, such as cancer and fungal and viral infections. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 211–217, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural properties of bombesin-like peptides revealed by surface-enhanced Raman scattering on roughened silver electrodes

This work presents a Fourier-transform absorption infrared, Fourier-transform Raman, and surface-enhanced Raman scattering (SERS) study of the following peptides belonging to the bombesin-like family: phyllolitorin, [Leu(8)]phyllolitorin, NMB, NMC, and PG-L. The SERS study was undertaken to understand the adsorption mechanism of bombesin-like peptides on an electrochemically roughened silver electrode surface and to show changes in the adsorption mechanism with alterations in amino acids and small tertiary structures. The SERS spectra presented here shows bands mainly associated with the Trp(8) residue vibrations. The presence of mainly pyrrole coring vibrations for phyllolitorin and [Leu(8)]phyllolitorin and mainly benzene coring modes for NMB and NMC indicated that these groups interact with the roughened silver electrode surface. Furthermore, N(1)--C(8) and C(3)--C(9) bonds of the PG-L indole ring seemed to have nearly a vertical orientation on the electrode surface. In addition, distinct vibrations of the C--S fragment were observed in the SERS spectra of [Leu(8)]phyllolitorin and PG-L. The strong enhancement of the nu(C==O) vibration in the [Leu(8)]phyllolitorin SERS spectrum yielded evidence that the intact C==O bond(s) bind strongly to the silver electrode surface, whereas NMC, phyllolitorin, and NMB were located near the silver surface. This finding was supported by the presence of the nu(C--C(==O)) mode. The amide I band observed at 1642 and 1634 cm(-1) for NMB and NMC, respectively, and the Raman amide III band seen in the 1282-1249 cm(-1) range for all peptides except PG-L, indicate that the strongly hydrogen-bonded alpha-helical conformation and random-coil structure are favored for binding to the surface. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 980-992, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

基于AFM的细胞表面超微形貌成像与机械特性测量研究进展

原子力显微镜(AFM)以其独特的优势(纳米级空间分辨率、皮牛级力灵敏度、免标记、可在溶液下工作)成为细胞生物学的重要研究手段.AFM不仅可以对活细胞表面超微形貌进行可视化表征,同时还可通过压痕技术对细胞机械特性(如杨氏模量)进行定量测量,为原位探索纳米尺度下单个活细胞动态生理活动及力学行为提供了可行性.过去的数十年中,研究人员利用AFM在细胞超微形貌成像和机械特性测量方面开展了广泛的应用研究,展示了有关细胞生理活动的大量新认识,为生命医药学领域相关问题的解决提供了新的思路;同时AFM自身的性能也在不断得到改进和提升,进一步促进了其在生命科学领域的应用.本文结合作者在应用AFM观测纳米尺度下癌症靶向药物作用效能方面的研究工作,介绍了AFM成像与细胞机械特性测量的原理,总结了近年来AFM用于细胞表面超微形貌成像与机械特性测量所取得的进展,讨论了AFM表征与检测细胞生理特性存在的问题,并对其未来发展方向进行了展望.     

Spectroscopic and molecular modeling studies on the binding of the flavonoid luteolin and human serum albumin

Luteolin (LUT) is a polyphenolic compound, found in a variety of fruits, vegetables, and seeds, which has a variety of pharmacological properties. In the present contribution, binding of LUT to human serum albumin (HSA), the most abundant carrier protein in the blood, was investigated with the aim of describing the binding mode and parameters of the interaction. The application of circular dichroism, UV‐Vis absorption, fluorescence, Raman and surface‐enhanced Raman scattering spectroscopy combined with molecular modeling afforded a clear picture of the association mode of LUT to HSA. Specific interactions with protein amino acids were evidenced. LUT was found to be associated in subdomain IIA where an interaction with Trp‐214 is established. Hydrophobic and electrostatic interactions are the major acting forces in the binding of LUT to HSA. The HSA conformations were slightly altered by the drug complexation with reduction of α‐helix and increase of β‐turns structures, suggesting a partial protein unfolding. Also the configuration of at least two disulfide bridges were altered. Furthermore, the study of molecular modeling afforded the binding geometry. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 917–927, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Rational shape engineering of the filamentous protein γ prefoldin through incremental gene truncation

An enticing possibility in nanotechnology is to use proteins as templates for the positioning of molecules in regular patterns with nanometer precision over large surface areas. However, the ability to redesign protein quaternary structure to construct new shapes remains underdeveloped. In the present work, we have engineered the dimensions of a filamentous protein, the γ prefoldin (γ PFD) from the hyperthermophile Methanocaldococcus jannaschii, and have achieved controllable attachment of filaments in a specific orientation on a carbon surface. Four different constructs of γ PFD were generated in which the coiled coils extending from the association domain are progressively truncated. Three of the truncation constructs form well‐defined filaments with predictable dimensions according to transmission electron microscopy. Two of these constructs had 2D persistence lengths similar to that of γ PFD at 300–740 nm. In contrast, the 2D persistence length of the shortest truncation mutant was 3500 nm, indicating that the filament adsorbs along a different axis than the other constructs with its two rows of coiled coils facing out from the surface. The elastic moduli of the filaments range from 0.7–2.1 GPa, similar to rigid plastics and within the lower limit for proteins whose primary intermolecular interaction is hydrogen bonding. These results demonstrate a versatile approach for controlling the overall dimensions and surface orientation of protein filaments, and expand the toolbox by which to tune two overall dimensions in protein space for the creation of templated materials over a wide variety of conditions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 496–503, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Investigations of thermotropic phase behavior of newly developed synthetic PEGylated lipids using Raman spectro-microscopy

In this article, a temperature-controlled Raman spectro-microscopic technique has been utilized to detect and analyze the phase behaviors of two newly developed synthetic PEGylated lipids trademarked as QuSomestrade mark, which spontaneously form liposomes upon hydration in contrast to conventional lipids. The amphiphiles considered in this study differ in their hydrophobic hydrocarbon chain length and contain different units of polyethylene glycol (PEG) hydrophilic headgroups. Raman spectra of these new artificial lipids have been recorded in the spectral range of 500-3100 cm(-1) by using a Raman microscope system in conjunction with a temperature-controlled sample holder. The gel to liquid phase transitions of the sample lipids composed of pure 1,2-dimyristoyl-rac-glycerol-3-dodecaethylene glycol (GDM-12) and 1,2-distearoyl-rac-glycerol-3-triicosaethylene glycol (GDS-23) have been revealed by plotting peak intensity ratios in the C--H stretching region as a function of temperature. From this study, we have found that the main phase transitions occur at a temperature of approximately 5.2 and 21.2 degrees C for pure GDM-12 and GDS-23, respectively. Furthermore, the lipid GDS-23 also shows a postphase transition temperature at 33.6 degrees C. To verify our results, differential scanning calorimetry (DSC) experiments have been conducted and the results are found to be in an excellent agreement with Raman scattering data. This important information may find application in various studies including the development of lipid-based novel substances and drug delivery systems. (c) 2008 Wiley Periodicals, Inc. Biopolymers 89: 1012-1020, 2008.This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com.     

Changes in the quaternary structure of amelogenin when adsorbed onto surfaces

Amelogenin is a unique protein that self‐assembles into spherical aggregates called “nanospheres” and is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin onto substrates is of great interest because protein‐surface interactions are critical to its function. We report studies of the adsorption of amelogenin onto self‐assembled monolayers containing COOH end group functionality as well as single crystal fluoroapatite, a biologically relevant surface. We found that although our solutions contained only nanospheres of narrow size distribution, smaller structures such as dimers or trimers were observed on the hydrophilic surfaces. This suggests that amelogenin can adsorb onto surfaces as small structures that “shed” or disassemble from the nanospheres that are present in solution. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 103–107, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Vibrational spectroscopic studies of newly developed synthetic biopolymers

Vibrational spectroscopic techniques such as near‐infrared (NIR), Fourier transform infrared (FTIR), and Raman spectroscopy are valuable diagnostic tools that can be used to elucidate comprehensive structural information of numerous biological samples. In this review article, we have highlighted the advantages of nanotechnology and biophotonics in conjunction with vibrational spectroscopic techniques in order to understand the various aspects of new kind of synthetic biopolymers termed as polyethylene glycol (PEG)ylated lipids. In contrast to conventional phospholipids, these novel lipids spontaneously form liposomes or nanovesicles upon hydration, without the supply of external activation energy. The amphiphiles considered in this study differ in their hydrophobic acyl chain length and contain different units of PEG hydrophilic headgroups. We have further explored the thermotropic phase behaviors and associated changes in the conformational order/disorder of such lipids by using variable‐temperature FTIR and Raman spectroscopy. Phase transition temperature profiles and correlation between various spectral indicators have been identified by either monitoring the shifts in the vibrational peak positions or plotting vibrational peak intensity ratios in the C? H stretching region as a function of temperature. To supplement our observations of phase transformations, a thermodynamic approach known as differential scanning calorimetry (DSC) has been applied and revealed a good agreement with the infrared and Raman spectroscopic data. Finally, the investigation of thermal properties of lipids is extremely crucial for numerous purposes, thus the results obtained in this work may find application in a wide variety of studies including the development of PEGylated lipid based drug and substances delivery vehicles. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 403–417, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Interplay between protein homeostasis networks in protein aggregation and proteotoxicity

The misfolding and aggregation of disease proteins is characteristic of numerous neurodegenerative diseases. Particular neuronal populations are more vulnerable to proteotoxicity while others are more apt to tolerate the misfolding and aggregation of disease proteins. Thus, the cellular environment must play a significant role in determining whether disease proteins are converted into toxic or benign forms. The endomembrane network of eukaryotes divides the cell into different subcellular compartments that possess distinct sets of molecular chaperones and protein interaction networks. Chaperones act as agonists and antagonists of disease protein aggregation to prevent the accumulation of toxic intermediates in the aggregation pathway. Interacting partners can also modulate the conformation and localization of disease proteins and thereby influence proteotoxicity. Thus, interplay between these protein homeostasis network components can modulate the self‐association of disease proteins and determine whether they elicit a toxic or benign outcome. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 229–236, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Adhesion of pancreatic beta cells to biopolymer films

Dramatic reversal of Type 1 diabetes in patients receiving pancreatic islet transplants continues to prompt vigorous research concerning the basic mechanisms underlying patient turnaround. At the most fundamental level, transplanted islets must maintain viability and function in vitro and in vivo and should be protected from host immune rejection. Our previous reports showed enhancement of islet viability and insulin secretion per tissue mass for small islets (<125 μm) as compared with large islets (>125 μm), thus, demonstrating the effect of enhancing the mass transport of islets (i.e. increasing tissue surface area to volume ratio). Here, we report the facile dispersion of rat islets into individual cells that are layered onto the surface of a biopolymer film towards the ultimate goal of improving mass transport in islet tissue. The tightly packed structure of intact islets was disrupted by incubating in calcium‐free media resulting in fragmented islets, which were further dispersed into individual or small groups of cells by using a low concentration of papain. The dispersed cells were screened for adhesion to a range of biopolymers and the nature of cell adhesion was characterized for selected groups by quantifying adherent cells, measuring the surface area coverage of the cells, and immunolabeling cells for adhesion proteins interacting with selected biopolymers. Finally, beta cells in suspension were centrifuged to form controlled numbers of cell layers on films for future work determining the mass transport limitations in the adhered tissue constructs. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 676–685, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Crystal structure of an S‐formylglutathione hydrolase from Pseudoalteromonas haloplanktis TAC125

S‐formylglutathione hydrolases (FGHs) constitute a family of ubiquitous enzymes which play a key role in formaldehyde detoxification both in prokaryotes and eukaryotes, catalyzing the hydrolysis of S‐formylglutathione to formic acid and glutathione. While a large number of functional studies have been reported on these enzymes, few structural studies have so far been carried out. In this article we report on the functional and structural characterization of PhEst, a FGH isolated from the psychrophilic bacterium Pseudoalteromonas haloplanktis. According to our functional studies, this enzyme is able to efficiently hydrolyze several thioester substrates with very small acyl moieties. By contrast, the enzyme shows no activity toward substrates with bulky acyl groups. These data are in line with structural studies which highlight for this enzyme a very narrow acyl‐binding pocket in a typical α/β‐hydrolase fold. PhEst represents the first cold‐adapted FGH structurally characterized to date; comparison with its mesophilic counterparts of known three‐dimensional structure allowed to obtain useful insights into molecular determinants responsible for the ability of this psychrophilic enzyme to work at low temperature. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 669–677, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Polymerization and matrix physical properties as important design considerations for soluble collagen formulations

Despite extensive use of type I collagen for research and medical applications, its fibril‐forming or polymerization potential has yet to be fully defined and exploited. Here, we describe a type I collagen formulation that is acid solubilized from porcine skin collagen (PSC), quality controlled based upon polymerization potential, and well suited as a platform polymer for preparing three‐dimensional (3D) culture systems and injectable/implantable in vivo cellular microenvironments in which both relevant biochemical and biophysical parameters can be precision‐controlled. PSC is compared with three commercial collagens in terms of composition and purity as well as polymerization potential, which is described by kinetic parameters and fibril microstructure and mechanical properties of formed matrices. When subjected to identical polymerization conditions, PSC showed significantly decreased polymerization times compared to the other collagens and yielded matrices with the greatest mechanical integrity and broadest range of mechanical properties as characterized in oscillatory shear, uniaxial extension, and unconfined compression. Compositional and intrinsic viscosity analyses suggest that the enhanced polymerization potential of PSC may be attributed to its unique oligomer composition. Collectively, this work demonstrates the importance of standardizing next generation collagen formulations based upon polymerization potential and provides preliminary insight into the contribution of oligomers to collagen polymerization properties. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 690–707, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

In-situ Raman microprobe studies of plant cell walls: Macromolecular organization and compositional variability in the secondary wall of Picea mariana (Mill.) B.S.P.

Native-state organization and distribution of cell-wall components in the secondary wall of woody tissue from P. mariana (Black Spruce) have been investigated using polarized Raman microspectroscopy. Evidence for orientation is detected through Raman intensity variations resulting from rotations of the exciting electric vector with respect to cell-wall geometry. Spectral features associated with cellulose and lignin were studied. The changes in cellulose bands indicate that the pyranose rings of the anhydroglucose repeat units are in planes perpendicular to the cross section, while methine C–H bonds are in planes parallel to the cross section. Changes in bands associated with lignin indicate that the aromatic rings of the phenyl-propane units are most often in the plane of the cell-wall surface. However, regions where lignin orientation departs from this pattern also occur. These results represent direct evidence of molecular organization with respect to cellular morphological features in woody tissue, and indicate that cell-wall components are more highly organized than had been recognized. Studies carried out in order to establish the usefulness and sensitivity of the Raman technique to differences of composition within the cell walls provide evidence of variations in the distribution of cellulose and lignin. Such compositional differences were more prominent between the walls of different cells than within a particular cell wall.