Exceptional Visible‐Light‐Driven Cocatalyst‐Free Photocatalytic Activity of g‐C3N4 by Well Designed Nanocomposites with Plasmonic Au and SnO2

In this work, plasmonic Au/SnO₂/g‐C₃N₄ (Au/SO/CN) nanocomposites have been successfully synthesized and applied in the H₂ evolution as photocatalysts, which exhibit superior photocatalytic activities and favorable stability without any cocatalyst under visible‐light irradiation. The amount‐optimized 2Au/6SO/CN nanocomposite capable of producing approximately 770 μmol g^?1 h^?1 H₂ gas under λ > 400 nm light illumination far surpasses the H₂ gas output of SO/CN (130 μmol g^?1), Au/CN (112 μmol g^?1 h^?1), and CN (11 μmol g^?1 h^?1) as a contrast. In addition, the photocatalytic activity of 2Au/6SO/CN maintains unchanged for 5 runs in 5 h. The enhanced photoactivity for H₂ evolution is attributed to the prominently promoted photogenerated charge separation via the excited electron transfer from plasmonic Au (≈520 nm) and CN (470 nm > λ > 400 nm) to SO, as indicated by the surface photovoltage spectra, photoelectrochemical I–V curves, electrochemical impedance spectra, examination of formed hydroxyl radicals, and photocurrent action spectra. Moreover, the Kelvin probe test indicates that the newly aligned conduction band of SO in the fabricated 2Au/6SO/CN is indispensable to assist developing a proper energy platform for the photocatalytic H₂ evolution. This work distinctly provides a feasible strategy to synthesize highly efficient plasmonic‐assisted CN‐based photocatalysts utilized for solar fuel production.     

Aerobic biodegradation of a mixture of sulfonated azo dyes by a bacterial consortium immobilized in a two‐stage sparged packed‐bed biofilm reactor

The biodegradation of the sulfonated azo dyes, Acid Orange 7 (AO7) and Acid Red 88 (AR88), by a bacterial consortium isolated from water and soil samples obtained from sites receiving discharges from textile industries, was evaluated. For a better removal of azo dyes and their biodegradation byproducts, an aerobically operated two‐stage rectangular packed‐bed biofilm reactor (2S‐RPBR) was constructed. Because the consortium's metabolic activity is affected by oxygen, the effect of the interstitial air flow rate Q_GI on 2S‐RPBR's zonal values of the oxygen mass transfer coefficient k_La was estimated. In the operational conditions probed in the bioreactor, the k_La values varied from 3 to 60 h^?1, which roughly correspond to volumetric oxygen transfer rates, dc_L/dt, ranging from 20 to 375 mg O₂ L^?1h^?1. Complete biodegradation of azo dyes was attained at loading rates B_V,AZ up to 40 mg L^?1d^?1. At higher B_V,AZ values (80 mg L^?1 d^?1), dye decolorization and biodegradation of the intermediaries 4‐amino‐naphthalenesulphonic acid (4‐ANS) and 1‐amino‐2‐naphthol (1‐A2N) was almost complete. However, a diminution in COD and TOC removal efficiencies was observed in correspondence to the 4‐aminobenzenesulfonic acid (4‐ABS) accumulation in the bioreactor. Although the oxygen transport rate improved the azo dye mineralization, the results suggest that the removal efficiency of azo dyes was affected by biofilm detachment at relatively high Q_GI and B_V,AZ values. After 225 days of continuous operation of the 2S‐RFBR, eight bacterial strains were isolated from the biofilm attached to the porous support. The identified genera were: Arthrobacter, Variovorax, Agrococcus, Sphingomonas, Sphingopyxis, Methylobacterium, Mesorhizobium, and Microbacterium.     

NapM,a new nucleoid‐associated protein,broadly regulates gene expression and affects mycobacterial resistance to anti‐tuberculosis drugs

Nucleoid‐associated proteins (NAPs) play important roles in the global organization of bacterial chromosomes. However, potential NAPs and their functions are barely characterized in mycobacteria. In this study, NapM, an alkaline protein, functions as a new NAP. NapM is conserved in all of the sequenced mycobacterial genomes, and can recognize DNA in a length‐dependent but sequence‐independent manner. It prefers AT‐rich DNA and binds to the major groove. NapM possesses a clear DNA‐bridging function, and can protect DNA from DNase I digestion. NapM globally regulates the expression of more than 150 genes and the resistance of Mycobacterium smegmatis to two anti‐tuberculosis drugs, namely, rifampicin and ethambutol. An ABC transporter operon was found to be specifically responsible for the napM‐dependent ethambutol resistance of M. smegmatis. NapM also presents a similar regulation of anti‐tuberculosis drug resistance in M. tuberculosis. These results suggest that NapM is a new member of the mycobacterial NAP family. Our findings expand the range of identified NAPs and improve the understanding on the relationship between NAPs with antibiotic resistance in mycobacteria.     

Low‐Temperature Reduction Strategy Synthesized Si/Ti3C2 MXene Composite Anodes for High‐Performance Li‐Ion Batteries

Silicon is attracting enormous attention due to its theoretical capacity of 4200 mAh g^?1 as an anode for Li‐ion batteries (LIBs). It is of fundamental importance and challenge to develop low‐temperature reaction route to controllably synthesize Si/Ti₃C₂ MXene LIBs anodes. Herein, a novel and efficient strategy integrating in situ orthosilicate hydrolysis and a low‐temperature reduction process to synthesize Si/Ti₃C₂ MXene composites is reported. The hydrolysis of tetraethyl orthosilicate leads to homogenous nucleation and growth of SiO₂ nanoparticles on the surface of Ti₃C₂ MXene. Subsequently, SiO₂ nanoparticles are reduced to Si via a low‐temperature (200 °C) reduction route. Importantly, Ti₃C₂ MXene not only provides fast transfer channels for Li⁺ and electrons, but also relieves volume expansion of Si during cycling. Moreover, the characteristics of excellent pseudocapacitive performance and high conductivity of Ti₃C₂ MXene can synergistically contribute to the enhancement of energy storage performance. As expected, Ti₃C₂/Si anode exhibits an outstanding specific capacity of 1849 mAh g^?1 at 100 mA g^?1, even retaining 956 mAh g^?1 at 1 A g^?1. The low‐temperature synthetic route to Si/Ti₃C₂ MXene electrodes and involved battery‐capacitive dual‐model energy storage mechanism has potential in the design of novel high‐performance electrodes for energy storage devices.     

Biodegradation of naphthalene in the oil refinery wastewater by enriched activated sludge

The main purpose of this paper is to study naphthalene (NAP) biodegradation by acclimated activated sludge, employing the culture-enrichment method in a continuous flow bioreactor of the wastewater treatment process. The effects of various COD loadings and influent flow rates of an artificial wastewater containing 15 mg l⁻¹ NAP on the biodegradation rates of the activated sludge will be investigated, in order to determine the biodegradation kinetics and minimum mean cell residence time of the activated sludge. From the experimental results, it was found that the resulting enriched activated sludge follows the growth rate of the Monod type and can biodegrade those COD and NAP loadings in the influents efficiently, and its bio-treatment efficiency on NAPs increases with the decrease of influent flow rate. The sludge volume index (SVI) of the resulting enriched activated sludge meets the design value required by the convectional activated sludge process for the treatment of wastewater.     

Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries

Solid polymer electrolytes as one of the promising solid‐state electrolytes have received extensive attention due to their excellent flexibility. However, the issues of lithium (Li) dendrite growth still hinder their practical applications in solid‐state batteries (SSBs). Herein, composite electrolytes from “ceramic‐in‐polymer” (CIP) to “polymer‐in‐ceramic” (PIC) with different sizes of garnet particles are investigated for their effectiveness in dendrite suppression. While the CIP electrolyte with 20 vol% 200 nm Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) particles (CIP‐200 nm) exhibits the highest ionic conductivity of 1.6 × 10^?4 S cm^?1 at 30 °C and excellent flexibility, the PIC electrolyte with 80 vol% 5 µm LLZTO (PIC‐5 µm) shows the highest tensile strength of 12.7 MPa. A sandwich‐type composite electrolyte (SCE) with hierarchical garnet particles (a PIC‐5 µm interlayer sandwiched between two CIP‐200 nm thin layers) is constructed to simultaneously achieve dendrite suppression and excellent interfacial contact with Li metal. The SCE enables highly stable Li plating/stripping cycling for over 400 h at 0.2 mA cm^?2 at 30 °C. The LiFePO₄/SCE/Li cells also demonstrate excellent cycle performance at room temperature. Fabricating sandwich‐type composite electrolytes with hierarchical filler designs can be an effective strategy to achieve dendrite‐free SSBs with high performance and high safety at room temperature.     

Structural characterization of the NAP; the major adhesion complex of the human pathogen Mycoplasma genitalium

Mycoplasma genitalium, the causative agent of non‐gonococcal urethritis and pelvic inflammatory disease in humans, is a small eubacterium that lacks a peptidoglycan cell wall. On the surface of its plasma membrane is the major surface adhesion complex, known as NAP that is essential for adhesion and gliding motility of the organism. Here, we have performed cryo‐electron tomography of intact cells and detergent permeabilized M. genitalium cell aggregates, providing sub‐tomogram averages of free and cell‐attached NAPs respectively, revealing a tetrameric complex with two‐fold rotational (C2) symmetry. Each NAP has two pairs of globular lobes (named α and β lobes), arranged as a dimer of heterodimers with each lobe connected by a stalk to the cell membrane. The β lobes are larger than the α lobes by 20%. Classification of NAPs showed that the complex can tilt with respect to the cell membrane. A protein complex containing exclusively the proteins P140 and P110, was purified from M. genitalium and was structurally characterized by negative‐stain single particle EM reconstruction. The close structural similarity found between intact NAPs and the isolated P140/P110 complexes, shows that dimers of P140/P110 heterodimers are the only components of the extracellular region of intact NAPs in M. genitalium.     

A step-forward in the characterization and potential applications of solid and liquid oxygen transfer vectors

Silicone oil 20 and 200 cSt, a perfluorocarbon (FC40TM), heptamethylnonane, Kraton, Elvax, and Desmopan were evaluated for their ability to enhance oxygen transfer in stirred tank and airlift reactors (STR and ALR, respectively). None of the vectors tested was either toxic or biodegradable and they exhibited a moderate affinity for oxygen (gas/vector partitioning coefficients K_{\textg/\textv} = C_\textg ·C_\textv^{- 1} K_{{{\text{g}}/{\text{v}}}} = C_{\text{g}} \cdot C_{\text{v}}^{- 1} ranging from 3 to 5.1). FC40 was highly volatile, while KratonTM and ElvaxTM exhibited a low thermal stability, which constitutes a serious handicap for their implementation in fermentations. Silicone oil 20 cSt and Desmopan supported the highest oxygen transfer rates under abiotic conditions in both STR and ALR designs, with enhancement factors of up to 90% and 250%, respectively, compared to control tests (deprived of vector). The fact that these vectors showed the highest K _g/v proved that, besides the classical selection criteria, the in situ hydrodynamic behavior (which affects K _L a) must be considered for vector selection. The use of silicone oil 20 cSt and Desmopan in glucose-supplemented Saccharomyces cerevisiae fermentations resulted in a two- and threefold increase in biomass productions, respectively. The better performance of Desmopan in terms of biomass growth enhancement, together with the absence of the operational problems inherent to the use of liquid vectors (such as intensive foaming, high cost, and difficult solvent recovery), make solid vectors a promising and cost-effective alternative in the future developments of two-phase partitioning bioreactors.     

Enhanced Rate Capability of Ion‐Accessible Ti3C2Tx‐NbN Hybrid Electrodes

Although 2D Ti₃C₂T_x is a good candidate for supercapacitors, the restacking of nanosheets hinders the ion transport significantly at high scan rates, especially under practical mass loading (>10 mg cm^?2) and thickness (tens of microns). Here, Ti₃C₂T_x‐NbN hybrid film is designed by self‐assembling Ti₃C₂T_x with 2D arrays of NbN nanocrystals. Working as an interlayer spacer of Ti₃C₂T_x, NbN facilitates the ion penetration through its 2D porous structure; even at extremely high scan rates. The hybrid film shows a thickness‐independent rate performance (almost the same rate capabilities from 2 to 20 000 mV s^?1) for 3 and 50 µm thick electrodes. Even a 109 µm thick Ti₃C₂T_x‐NbN electrode shows a better rate performance than 25 µm thick pure Ti₃C₂T_x electrodes. This method may pave a way to controlling ion transport in electrodes composed of 2D conductive materials, which have potential applications in high‐rate energy storage and beyond.     

A Self‐Forming Composite Electrolyte for Solid‐State Sodium Battery with Ultralong Cycle Life

Replacing organic liquid electrolyte with inorganic solid electrolytes (SE) can potentially address the inherent safety problems in conventional rechargeable batteries. However, solid‐state batteries (SSBs) have been plagued by the relatively low ionic conductivity of SEs and large charge‐transfer resistance between electrode and SE. Here, a new design strategy is reported for improving the ionic conductivity of SE by self‐forming a composite material. An optimized Na⁺ ion conducting composite electrolyte derived from the Na_{1+ n} Zr₂Si _n P_{3? n} O₁₂ NASICON (Na Super Ionic Conductor) structure is successfully synthesized, yielding ultrahigh ionic conductivity of 3.4 mS cm^?1 at 25 °C and 14 mS cm^?1 at 80 °C. On the other hand, in order to enhance the charge‐transfer rate at the electrode/electrolyte interface, an interface modification strategy is demonstrated by utilization of a small amount of nonflammable and nonvolatile ionic liquid (IL) at the cathode side in SSBs. The IL acts as a wetting agent, enabling a favorable interface kinetic in SSBs. The Na₃V₂(PO₄)₃/IL/SE/Na SSB exhibits excellent cycle performance and rate capability. A specific capacity of ≈90 mA h g^?1 is maintained after 10 000 cycles without capacity decay under 10 C rate at room temperature. This provides a new perspective to design fast ion conductors and fabricate long life SSBs.     

Analysis of the interacting surface of maurotoxin with the voltage‐gated Shaker B K+ channel

Maurotoxin (MTX) is a 34‐residue toxin that was isolated initially from the venom of the scorpion Scorpio maurus palmatus. Unlike the other toxins of the α‐KTx6 family (Pi1, Pi4, Pi7, and HsTx1), MTX exhibits a unique disulfide bridge organization of the type C₁? C₅, C₂? C₆, C₃? C₄, and C₇? C₈ (instead of the conventional C₁? C₅, C₂? C₆, C₃? C₇, and C₄? C₈, herein referred to as Pi1‐like) that does not prevent its folding along the classic α/β scaffold of scorpion toxins. MTX_Pi1 is an MTX variant with a conventional pattern of disulfide bridging without any primary structure alteration of the toxin. Here, using MTX and/or MTX_Pi1 as models, we investigated how the type of folding influences toxin recognition of the Shaker B potassium channel. Amino acid residues of MTX that were studied for Shaker B recognition were selected on the basis of their homologous position in charybdotoxin, a three disulfide‐bridged scorpion toxin also active on this channel type. These residues favored either an MTX‐ or MTX_Pi1‐like folding. Our data indicate clearly that Lys²³ and Tyr³² (two out of ten amino acid residues studied) are the most important residues for Shaker B channel blockage by MTX. For activity on SKCa channels, the same amino acid residues also affect, directly or indirectly, the recognition of SK channels. The molecular modeling technique and computed docking indicate the existence of a correlation between the half cystine pairings of the mutated analogs and their activity on the Shaker B K⁺ channel. Overall, mutations in MTX could, or could not, change the reorganization of disulfide bridges of this molecule without affecting its α/β scaffold. However, changing of the peptide backbone (cross linking disulfide bridges from MTX‐like type vs MTX_Pi1‐like type) appears to have less impact on the molecule activity than mutation of certain key amino acids such as Lys²³ and Tyr³² in this toxin. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

A Low‐Cost Durable Na‐FeCl2 Battery with Ultrahigh Rate Capability

Na‐based batteries have long been regarded as an inexpensive, sustainable candidate for large‐scale stationary energy storage applications. Unfortunately, the market penetration of conventional Na‐NiCl₂ batteries is approaching its limit for several reasons, including limited rate capability and high Ni cost. Herein, a Na‐FeCl₂ battery operating at 190 °C is reported that allows a capacity output of 116 mAh g^?1 at an extremely high current density of 33.3 mA cm^?2 (≈0.6C). The superior rate performance is rooted in the intrinsically fast kinetics of the Fe/Fe²⁺ redox reaction. Furthermore, it is demonstrated that a small amount of Ni additive (10 mol%) effectively mitigates capacity fading of the Fe/NaCl cathode caused by Fe particle pulverization during long‐term cycling. The modified Fe/Ni cathode exhibits excellent cycling stability, maintaining a discharge energy density of over 295 Wh kg^?1 for 200 cycles at 10 mA cm^?2 (≈C/5).     

Evidence of temperature‐independent metabolic rates in diurnal Namib Desert tenebrionid beetles

To investigate whether the sensitivity to environmental temperature varies between nocturnal and diurnal species of tenebrionid beetle, the metabolic rates of three diurnal species (Onymacris plana Peringuey, Onymacris rugatipennis Haag and Physadesmia globosa Haag) and three nocturnal species (Epiphysa arenicola Penrith, Gonopus sp. and Stips sp.) of beetles from the Namib Desert are measured over a range of temperatures (15–40 °C) that are experienced by these beetles in their natural habitat. The diurnal species O. plana, O. rugatipennis and P. globosa exhibit temperature‐independent metabolic rates (mean Q₁₀ = 1.2) within temperature ranges that are ecologically relevant for diurnal desert beetles (30–40 °C). Onymacris plana, in particular, has a 20–40 °C rate–temperature slope (0.007 log₁₀ mL O₂ h^?1 g^?1 °C^?1; Q₁₀ = 1.1) that is less than half that of the other five beetle species (0.022–0.063 log₁₀ mL O₂ h^?1 g^?1 °C^?1; Q₁₀ ranges from 1.3–1.9), suggesting that O. plana is more metabolically independent of temperature than the other nocturnal and diurnal tenebrionids being investigated. Animals with metabolic rates that are decoupled from body temperature (or ambient temperature) may have an ecological advantage that allows them to exploit thermal and spatial niches during extreme temperature conditions.     

Long-term influence of the presence of a non-aqueous phase on the cell surface hydrophobicity of Pseudomonas in two-phase partitioning bioreactors

The long-term influence of silicone oil 200 cSt (SO200) and 2, 2, 4, 4, 6, 8, 8-heptamethylnonane (HMN) on the cell surface hydrophobicity (CSH) of a hexane-degrading Pseudomonas aeruginosa strain and a toluene-degrading Pseudomonas putida strain was assessed in two-phase partitioning bioreactors under batch and continuous operation. CSH was evaluated using a modified BATH method based on optical density (CSH_OD) and colony-forming unit (CSH_CFU) measurements. In the presence of HMN, P. aeruginosa turned hydrophobic over the time course as shown by the gradual increase in CSH_OD (61 ± 1%) and CSH_CFU (53 ± 3%) under batch degradation and in CSH_OD (49 ± 0%) under continuous operation. However, P. putida turned hydrophobic only under continuous operation (CSH_OD = 28 ±2% {\hbox{CS}}{{\hbox{H}}_{\rm{OD}}} = 28 \pm 2\% ). On the other hand, no significant CSH enhancement was observed in both Pseudomonas strains in the presence of SO200. These results suggested that CSH is species, non-aqueous phase, and cultivation mode dependant, and an inducible property of bacteria. Maximum hexane elimination capacities increased by 2 and 3 in the presence of SO200 and HMN, respectively. Based on the absence of CSH in P. aeruginosa in the presence of SO200, the higher elimination capacities recorded were likely due to an improved hexane mass transfer (physical effect). However, in the presence of HMN, a direct hexane uptake from the non-aqueous phase (biological effect) might have also contributed to this enhancement.     

Optimized 4‐V Spinel Cathode Material with High Energy Density for Li‐Ion Cells Operating at 60 °C

Spinel cathodes comprising 16‐μm, AlPO₄‐coated Li_1.09Mn_1.83Al_0.08O₄ with a high energy density of 1.2 W h cm^‐3 are synthesized via a conventional solid‐state reaction using MnO₂ and Li₂CO₃ at 770 °C for 10 h and using a solution‐based coating method in bulk scale (>20 kg). The cathodes are coated by aluminum phosphate at a thickness of <10 nm. The coated cathodes exhibit a first discharge capacity of 108 mA·h g^‐1 and a coulombic efficiency of >99.8%, and their capacity retention is 78% after 200 cycles at a 0.5C rate in a Li‐ion cell under 60 °C. More importantly, a Li‐ion cell containing the coated cathode does not exhibit a swelling problem after 200 cycles at 60 °C. Transmission and scanning electron microscopy suggest that the uniformly distributed AlPO₄ coating and the possible formation of a solid solution phase along the surface play key roles in enhancing the electrochemical performance of the LiMn₂O₄ spinel at 60 °C.     

Bioremediation of Hydrocarbons in Contaminated Wood: A Proof‐of‐Concept Study

A proof‐of‐concept study to evaluate the biological removal of hydrocarbons (naphthalene, n‐hexadecane, and fuel oil #2) from contaminated wood (Southern yellow pine) was conducted using ¹⁴C‐labeled tracers and gas chromatography. Contaminated wood was brought in contact with n‐hexadecane‐degrading Pseudomonas aeruginosa PG201 or naphthalene degrading environmental isolates by the application either on mineral medium agar or filter paper containing a previously grown biomass (“overlay” technique). The experiments showed a significant acceleration of naphthalene removal by biomass. Due to biodegradation combined with evaporation, naphthalene was nearly completely removed (up to 90–98 %) in 4–8 days from freshly contaminated 6 mm‐ and 17 mm‐thick wood samples. The removal of a less volatile hydrocarbon, n‐hexadecane, was less efficient, at 40–60% in 20–40 days, with the only variable significantly affecting this pollutant's removal rate being the moisture content of the medium. Biodegradation experiments with standard heating fuel oil #2 (a representative real‐world contaminant) resulted in significant removal of light hydrocarbons (C₁₀–C₁₆), i.e., more mobile/volatile substrates, in 3 weeks (up to 70 %) whereas heavier hydrocarbons (C₁₇–C₁₉) were less affected. Pollutant mobility in both wood and aqueous media was shown to be the crucial factor affecting the removal efficiency. These results point toward a promising technique to reclaim wooden structures contaminated with volatile and semi‐volatile chemicals.     

TEMPERATURE EFFECTS ON MICROALGAL PHOTOSYNTHESIS‐LIGHT RESPONSES MEASURED BY O2 PRODUCTION,PULSE‐AMPLITUDE‐MODULATED FLUORESCENCE,AND 14C ASSIMILATION1

Short‐term temperature effects on photosynthesis were investigated by measuring O₂ production, PSII‐fluorescence kinetics, and ¹⁴C‐incorporation rates in monocultures of the marine phytoplankton species Prorocentrum minimum (Pavill.) J. Schiller (Dinophyceae), Prymnesium parvum f. patelliferum (J. C. Green, D. J. Hibberd et Pienaar) A. Larsen (Coccolithophyceae), and Phaeodactylum tricornutum Bohlin (Bacillariophyceae), grown at 15°C and 80 μmol photons · m^?2 · s^?1. Photosynthesis versus irradiance curves were measured at seven temperatures (0°C–30°C) by all three approaches. The maximum photosynthetic rate (P^C_max) was strongly stimulated by temperature, reached an optimum for Pro. minimum only (20°C–25°C), and showed a similar relative temperature response for the three applied methods, with Q₁₀ ranging from 1.7 to 3.5. The maximum light utilization coefficient (α^C) was insensitive or decreased slightly with increasing temperature. Absolute rates of O₂ production were calculated from pulse‐amplitude‐modulated (PAM) fluorometry measurements in combination with biooptical determination of absorbed quanta in PSII. The relationship between PAM‐based O₂ production and measured O₂ production and ¹⁴C assimilation showed a species‐specific correlation, with 1.2–3.3 times higher absolute values of P^C_max and α^C when calculated from PAM data for Pry. parvum and Ph. tricornutum but equivalent for Pro. minimum. The offset seemed to be temperature insensitive and could be explained by a lower quantum yield for O₂ production than the theoretical maximum (due to Mehler‐type reactions). Conclusively, the PAM technique can be used to study temperature responses of photosynthesis in microalgae when paying attention to the absorption properties in PSII.     

Electric‐induced mortality of newly transformed juvenile fishes in waters of different conductivity

In three experiments, each with three species of newly transformed juvenile fishes, the immediate mortality was determined after electrical exposure to 60 Hz pulsed DC in waters of different conductivity (C_w). With a constant applied power density (D_a; 1·0–4·9 mW cm^?3 depending on species) over a range of C_w(10–1020 μS cm^?1), the results predicted that the highest fish mortality would occur at C_w of 65 μS cm^?1 for bluegill Lepomis macrochirus, 74 μS cm^?1 for largemouth bass Micropterus salmoides and at 140–175 μS cm^?1 for channel catfish Ictalurus punctatus. In experiment 2, the voltage gradient (E) was maintained constant (2·5–8·0 peak V cm^?1 depending on species) over the same range of C_w, and fish mortality increased with current density (J) or D_a, which are directly related to C_w. In experiment 3, fish mortality did not differ when peak E(3 or 8 V cm^?1 depending on species) and mean J(0·09 or 0·24 mA cm^?2 depending on species) were held constant by changing pulse width in waters with different C_w(99, 165 or 495 μS cm^?1). Fish mortality in this experiment was not significantly related to peak or mean transferred power density, and the ‘power transfer theory for electrofishing’ was not useful for predicting electrofishing mortality. Overall, the results of the present study indicated that mortality caused by exposure to electricity can be predicted more accurately with the variables peak E and mean J than with models requiring determination of effective conductivity of the fish.     

Chemical Synthesis of 3D Graphene‐Like Cages for Sodium‐Ion Batteries Applications

Sodium (Na) super ion conductor structured Na₃V₂(PO₄)₃ (NVP) is extensively explored as cathode material for sodium‐ion batteries (SIBs) due to its large interstitial channels for Na⁺ migration. The synthesis of 3D graphene‐like structure coated on NVP nanoflakes arrays via a one‐pot, solid‐state reaction in molten hydrocarbon is reported. The NVP nanoflakes are uniformly coated by the in situ generated 3D graphene‐like layers with the thickness of 3 nm. As a cathode material, graphene covered NVP nanoflakes exhibit excellent electrochemical performances, including close to theoretical reversible capacity (115.2 mA h g^?1 at 1 C), superior rate capability (75.9 mA h g^?1 at 200 C), and excellent cyclic stability (62.5% of capacity retention over 30000 cycles at 50 C). Furthermore, the 3D graphene‐like cages after removing NVP also serve as a good anode material and deliver a specific capacity of 242.5 mA h g^?1 at 0.1 A g^?1. The full SIB using these two cathode and anode materials delivers a high specific capacity (109.2 mA h g^?1 at 0.1 A g^?1) and good cycling stability (77.1% capacity retention over 200 cycles at 0.1 A g^?1).