Combinatorial screening of polymer nanoparticles for their ability to recognize epitopes of AAV‐neutralizing antibodies

A library of 17 nanoparticles made of acrylate and methacrylate copolymers is prepared, characterized, and screened against six epitopes of adeno‐associated viruses (AAV)‐neutralizing antibodies to assess their affinity and specificity. Peptide epitopes are immobilized onto the surface of glass beads, packed in filtration microplates, and incubated with fluorescein‐labelled nanoparticles. Following intense washing, the affinity of nanoparticles to immobilized epitopes is assessed by measuring the fluorescence of captured nanoparticles. The results show that polar monomers, acrylic acid in particular, have a positive impact on polymer affinity towards all peptides used in this study. The presence of hydrophobic monomers, on other hand, has a negative impact on polymer binding. The composition of peptides used in this study has no noticeable impact on the affinity of synthesized nanoparticles. The affinity of nanoparticles with the highest affinity to peptide targets does not exceed millimolar level. Overall, it is found that the synthesized library showed modest affinity but lacked specificity, which should be further “tuned,” for example, by using molecular imprinting to achieve an acceptable level of affinity and specificity for practical application.     

Binding of phosphorylated peptides and inhibition of their interaction with disease‐relevant human proteins by synthetic metal‐chelate receptors

The modulation of biological signal transduction pathways by masking phosphorylated amino acid residues represents a viable route toward pharmacologic protein regulation. Binding of phosphorylated amino acid residues has been achieved with synthetic metal‐chelate receptors. The affinity and selectivity of such receptors can be enhanced if combined with a second binding site. We demonstrate this principle with a series of synthetic ditopic metal‐chelate receptors, which were synthesized and investigated for their binding affinity to phosphorylated short peptides under conditions of physiological pH. The compounds showing highest affinity were subsequently used to inhibit the interaction of the human STAT1 protein to a peptide derived from the interferon‐γ receptor, and between the checkpoint kinase Chk2 and its preferred binding motif. Two of the investigated ditopic synthetic receptors show a significant increase in inhibition activity. The results show that regulation of protein function by binding to phosphorylated amino acids is possible. The introduction of additional binding sites into the synthetic receptors increases their affinity, but the flexibility of the structures investigated so far prohibited stringent amino acid sequence selectivity in peptide binding. Copyright © 2009 John Wiley & Sons, Ltd.     

Epitope motif of an anti‐nitrotyrosine antibody specific for tyrosine‐nitrated peptides revealed by a combination of affinity approaches and mass spectrometry

Nitration of tyrosine residues has been shown to be an important oxidative modification in proteins and has been suggested to play a role in several diseases such as atherosclerosis, asthma, lung and neurodegenerative diseases. Detection of nitrated proteins has been mainly based on the use of nitrotyrosine‐specific antibodies. In contrast, only a small number of nitration sites in proteins have been unequivocally identified by MS. We have used a monoclonal 3‐NT‐specific antibody, and have synthesized a series of tyrosine‐nitrated peptides of prostacyclin synthase (PCS) in which a single specific nitration site at Tyr‐430 had been previously identified upon reaction with peroxynitrite 17 . The determination of antibody‐binding affinity and specificity of PCS peptides nitrated at different tyrosine residues (Tyr‐430, Tyr‐421, Tyr‐83) and sequence mutations around the nitration sites provided the identification of an epitope motif containing positively charged amino acids (Lys and/or Arg) N‐terminal to the nitration site. The highest affinity to the anti‐3NT‐antibody was found for the PCS peptide comprising the Tyr‐430 nitration site with a K_D of 60 nM determined for the peptide, PCS(424‐436‐Tyr‐430NO₂); in contrast, PCS peptides nitrated at Tyr‐421 and Tyr‐83 had substantially lower affinity. ELISA, SAW bioaffinity, proteolytic digestion of antibody‐bound peptides and affinity‐MS analysis revealed highest affinity to the antibody for tyrosine‐nitrated peptides that contained positively charged amino acids in the N‐terminal sequence to the nitration site. Remarkably, similar N‐terminal sequences of tyrosine‐nitration sites have been recently identified in nitrated physiological proteins, such as eosinophil peroxidase and eosinophil‐cationic protein. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Identification of CRISP2 from human sperm as PSP94‐binding protein and generation of CRISP2‐specific anti‐peptide antibodies

Cysteine‐rich secretory proteins (CRISPs) are mainly found in the mammalian male reproductive tract and reported to be involved at different stages of fertilization. CRISPs have been shown to interact with prostate secretory protein of 94 amino acids (PSP94) from diverse sources, and the binding of these evolutionarily conserved proteins across species is proposed to be of functional significance. Of the three mammalian CRISPs, PSP94–CRISP3 interaction is well characterized, and specific binding sites have been identified; whereas, CRISP2 has been shown to interact with PSP94 in vitro. Interestingly, human CRISP3 and CRISP2 proteins are closely related showing 71.4% identity. In this study, we identified CRISP2 as a potential binding protein of PSP94 from human sperm. Further, we generated antisera capable of specifically detecting CRISP2 and not CRISP3. In this direction, specific peptides corresponding to the least conserved ion channel regulatory region were synthesized, and polyclonal antibodies were generated against the peptide in rabbits. The binding characteristics of the anti‐CRISP2 peptide antibody were evaluated using competitive ELISA. Immunoblotting experiments also confirmed that the peptide was able to generate antibodies capable of detecting the mature CRISP2 protein present in human sperm lysate. Furthermore, this anti‐CRISP2 peptide antibody also detected the presence of native CRISP2 on sperm.Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Sex‐peptides bind to two molecularly different targets in Drosophila melanogaster females

Sex‐Peptide (SP) and the peptide DUP99B elicit two postmating responses in Drosophila melanogaster females: receptivity is reduced and oviposition is increased. Both are synthesized in the male genital tract and transferred into the female during copulation. To elucidate their function, we characterized the binding properties of SP and DUP99B in females. Cryostat sections of adult females were incubated with alkaline phosphatase (AP)‐tagged peptides. In virgin females, both peptides have specific target sites in the nervous system and in the genital tract. The binding pattern is almost identical for both peptides. Incubation of sections of mated females confirm that some of these target sites correspond to the in vivo targets of the two peptides. Neuronal binding is dependent on an intact C‐terminal sequence of SP, binding in the genital tract is less demanding in terms of amino acid sequence requirement. On affinity blots the AP–SP probe binds to membrane proteins extracted from abdomen and head plus thorax, respectively. The binding proteins in the nervous system and the genital tract differ in their molecular properties. Calculation of dissociation constants (K_d), and also determination of the minimal peptide concentrations necessary for binding, indicate that SP is the more important peptide inducing the postmating responses. Our results suggest that binding of SP in the nervous system is responsible for eliciting the postmating responses, whereas binding in the genital tract reflects the presence of a peptide transporter. © 2003 Wiley Periodicals, Inc. J Neurobiol 55: 372–384, 2003     

Kinetic and functional characterisation of the heparin‐binding peptides from human transglutaminase 2

Transglutaminase 2 (TG2) is an autoantigen in celiac disease (CD) and it has multiple biologic functions including involvement in cell adhesion through interactions with integrins, fibronectin (FN), and heparan sulfate proteoglycans. We aimed to delineate the heparin‐binding regions of human TG2 by studying binding kinetics of the predicted heparin‐binding peptides using surface plasmon resonance method. In addition, we characterized immunogenicity of the TG2 peptides and their effect on cell adhesion. The high‐affinity binding of human TG2 to the immobilized heparin was observed, and two TG2 peptides, P1 (amino acids 202–215) and P2 (261–274), were found to bind heparin. The amino acid sequences corresponding to the heparin‐binding peptides were located close to each other on the surface of the TG2 molecule as part of the α‐helical structures. The heparin‐binding peptides displayed increased immunoreactivity against serum IgA of CD patients compared with other TG2 peptides. The cell adhesion reducing effect of the peptide P2 was revealed in Caco‐2 intestinal epithelial cell attachment to the FN and FN‐TG2 coated surfaces. We propose that TG2 amino acid sequences 202–215 and 261–274 could be involved in binding of TG2 to cell surface heparan sulfates. High immunoreactivity of the corresponding heparin‐binding peptides of TG2 with CD patient's IgA supports the previously described role of anti‐TG2 autoantibodies interfering with this interaction. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Molecular characterization of the β‐amyloid(4‐10) epitope of plaque specific Aβ antibodies by affinity‐mass spectrometry using alanine site mutation

Alzheimer disease is a neurodegenerative disease affecting an increasing number of patients worldwide. Current therapeutic strategies are directed to molecules capable to block the aggregation of the β‐amyloid(1‐42) (Aβ) peptide and its shorter naturally occurring peptide fragments into toxic oligomers and amyloid fibrils. Aβ‐specific antibodies have been recently developed as powerful antiaggregation tools. The identification and functional characterization of the epitope structures of Aβ antibodies contributes to the elucidation of their mechanism of action in the human organism. In previous studies, the Aβ(4‐10) peptide has been identified as an epitope for the polyclonal anti‐Aβ(1‐42) antibody that has been shown capable to reduce amyloid deposition in a transgenic Alzheimer disease mouse model. To determine the functional significance of the amino acid residues involved in binding to the antibody, we report here the effects of alanine single‐site mutations within the Aβ‐epitope sequence on the antigen‐antibody interaction. Specific identification of the essential affinity preserving mutant peptides was obtained by exposing a Sepharose‐immobilized antibody column to an equimolar mixture of mutant peptides, followed by analysis of bound peptides using high‐resolution MALDI‐Fourier transform‐Ion Cyclotron Resonance mass spectrometry. For the polyclonal antibody, affinity was preserved in the H6A, D7A, S8A, and G9A mutants but was lost in the F4, R5, and Y10 mutants, indicating these residues as essential amino acids for binding. Enzyme‐linked immunosorbent assays confirmed the binding differences of the mutant peptides to the polyclonal antibody. In contrast, the mass spectrometric analysis of the mutant Aβ(4‐10) peptides upon affinity binding to a monoclonal anti‐Aβ(1‐17) antibody showed complete loss of binding by Ala‐site mutation of any residue of the Aβ(4‐10) epitope. Surface plasmon resonance affinity determination of wild‐type Aβ(1‐17) to the monoclonal Aβ antibody provided a binding constant K_D in the low nanomolar range. These results provide valuable information in the elucidation of the binding mechanism and the development of Aβ‐specific antibodies with improved therapeutic efficacy.     

Surface immobilization chemistry influences peptide‐based detection of lipopolysaccharide and lipoteichoic acid

Antimicrobial peptides (AMPs) have recently gained attention as potentially valuable diagnostic and therapeutic agents. The utilization of these peptides for diagnostic purposes relies on the ability to immobilize them on the surface of a detection platform in a predictable and reliable manner that facilitates target binding. The method for attachment of peptides to a solid support is guided by peptide length, amino acid composition, secondary structure, and the nature of the underlying substrate. While immobilization methods that target amine groups of amino acid sequences are widely used, they can result in heterogeneous conjugation at multiple sites on a peptide and have direct implications for peptide presentation and function. Using two types of commercial amine‐reactive microtiter plates, we described the effects of analogous immobilization chemistries on the surface attachment of AMPs and their differential binding interaction with Gram‐specific bacterial biomarkers, lipopolysaccharide and lipoteichoic acid. As might be expected, differences in overall binding affinities were noted when comparing AMPs immobilized on the two types of plates. However, the two‐amine‐targeted linking chemistries also affected the specificity of the attached peptides; lipopolysaccharide generally demonstrated a preference for peptides immobilized on one type of plate, while (when observed at all) lipoteichoic acid bound preferentially to AMPs immobilized on the other type of plate. These results demonstrate the potential for tuning not only the binding affinities but also the specificities of immobilized AMPs by simple alterations in linking strategy. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.     

Mapping discontinuous protein‐binding sites via structure‐based peptide libraries: combining in silico and in vitro approaches

To perform their various functions, protein surfaces often have to interact with each other in a specific way. Usually, only parts of a protein are accessible and can act as binding sites. Because proteins consist of polypeptide chains that fold into complex three‐dimensional shapes, binding sites can be divided into two different types: linear sites that follow the primary amino acid sequence and discontinuous binding sites, which are made up of short peptide fragments that are adjacent in spatial proximity. Such discontinuous binding sites dominate protein–protein interactions, but are difficult to identify. To meet this challenge, we combined a computational, structure‐based approach and an experimental, high‐throughput method. SUPERFICIAL is a program that uses protein structures as input and generates peptide libraries to represent the protein's surface. A large number of the predicted peptides can be simultaneously synthesised applying the SPOT technology. The results of a binding assay subsequently help to elucidate protein–protein interactions; the approach is applicable to any kind of protein. The crystal structure of the complex of hen egg lysozyme with the well‐characterised murine IgG1 antibody HyHEL‐5 is available, and the complex is known to have a discontinuous binding site. Using SUPERFICIAL, the entire surface of lysozyme was translated into a peptide library that was synthesised on a cellulose membrane using the SPOT technology and tested against the HyHEL‐5 antibody. In this way, it was possible to identify two peptides (longest common sequence and peptide 19) that represented the discontinuous epitope of lysozyme. Copyright © 2012 John Wiley & Sons, Ltd.     

Position‐coded multivalent peptide–peptide interactions revealed by tryptophan‐scanning mutagenesis

We demonstrate in this contribution the evidence that significant cooperative binding effect can be identified for the amino acid sites that are determinant to the binding characteristics in peptide–peptide interactions. The analysis of tryptophan‐scanning mutagenesis of the 14‐mer peptide consisting only of glycine provides a mapping of position‐dependent contributions to the binding energy. The pronounced tryptophan‐associated peptide–peptide interactions are originated from the indole moieties with the main chains of 14‐mer glycines containing N–H and C?O moieties. Specifically, with the presence of two tryptophans as determinant amino acids, cooperative binding can be observed, which are dependent on relative positions of the two tryptophans with a “volcano”‐like characteristics. An optimal separation of 6–10 amino acids between two adjacent binding sites can be identified to achieve maximal binding interactions.     

Functional mapping of SPARC: peptides from two distinct Ca+(+)-binding sites modulate cell shape

Using synthetic peptides, we have identified two distinct regions of the glycoprotein SPARC (Secreted Protein Acidic and Rich in Cysteine) (osteonectin/BM-40) that inhibit cell spreading. One of these sites also contributes to the affinity of SPARC for extracellular matrix components. Peptides representing subregions of SPARC were synthesized and antipeptide antibodies were produced. Immunoglobulin fractions of sera recognizing an NH2-terminal peptide (designated 1.1) blocked SPARC- mediated anti-spreading activity. Furthermore, when peptides were added to newly plated endothelial cells or fibroblasts, peptide 1.1 and a peptide corresponding to the COOH terminal EF-hand domain (designated 4.2) inhibited cell spreading in a dose-dependent manner. These peptides exhibited anti-spreading activity at concentrations from 0.1 to 1 mM. The ability of peptides 1.1 and 4.2 to modulate cell shape was augmented by an inhibitor of protein synthesis and was blocked by specific antipeptide immunoglobulins. In addition to blocking cell spreading, peptide 4.2 competed for binding of [125I]SPARC and exhibited differential affinity for extracellular matrix molecules in solid-phase binding assays. The binding of peptide 4.2 to matrix components was Ca+(+)-dependent and displayed specificities similar to those of native SPARC. These studies demonstrate that both anti- spreading activity and affinity for collagens are functions of unique regions within the SPARC amino acid sequence. The finding that two separate regions of the SPARC protein contribute to its anti-spreading activity lead us to propose that multiple regions of the protein act in concert to regulate the interactions of cells with their extracellular matrix.     

On‐Resin Synthesis of an Acylated and Fluorescence‐Labeled Cyclic Integrin Ligand for Modification of Poly(lactic‐co‐glycolic acid)

Cyclic Arg‐Gly‐Asp (RGD) peptides show remarkable affinity and specificity to integrin receptors and mediate important physiological effects in tumor angiogenesis. Additionally, they are one of the keyplayers in improving the biocompatibility of biomaterials. The fully biodegradable polymer poly(lactic‐co‐glycolic acid) (PLGA) is frequently used for biomedical implants and can be applied as nanoparticles for drug delivery. The aim of this work was the generation of a lipidated c[RGDfK] peptide including a second functionality for coating of hydrophobic PLGA. Therefore, we established a general and straightforward strategy for the introduction of two different modifications into the same c[RGDfK] peptide. This allowed the generation of a palmitoylated integrin‐binding lipopeptide that shows high affinity to PLGA. Additionally, we coupled 5(6)‐carboxyfluorescein to the second site for modification to enable sensitive quantification of the immobilized lipopeptide on PLGA. In conclusion, we present a synthesis protocol that enables the preparation of c[RGDfK] lipopeptides with a strong affinity to PLGA and an additional site for modifications. This will provide the opportunity to introduce a variety of effector molecules site‐specifically to the c[RGDfK] lipopeptide, which will enable the introduction of multifunctionality into c[RGDfK]‐coated PLGA devices or nanoparticles.     

Model peptide‐based system used for the investigation of metal ions binding to histidine‐containing polypeptides

The reaction of histidine‐containing polypeptides with toxic and essential metals and the molecular mechanism of complexation has yet to be determined, particularly with respect to the conformational changes of the interacting macromolecules. Therefore, a system of oligopeptides containing histidine residues in various positions of Ala or Gly sequences has been designed and used in heavy metal comparatively binding experiments. The role of spacing residues (Gly and Ala repeats) in selecting the various conformations was investigated. The newly synthesized peptides and metal ion adducts have been characterized by Fourier transform infrared spectroscopy (FTIR) as well as electrospray ion trap mass spectrometry (ESI–MS) and circular dichroism (CD). The analysis of CD‐spectra of the four peptides in water revealed that the secondary structure depends much on the position of each amino acid in the peptide backbone. Our peptides system reveals various binding mechanisms of metal ions to peptides depending on the position of histidine residue and the corresponding conformations of Ala or Gly sequences. Biological and medical consequences of conformational changes of metal‐bound peptides are further discussed. Thus, the binding of heavy metals to four peptides may serve as a model system with respect to the conformational consequences of the metal addition on the amino acid repeats situated in prion protein. © 2010 Wiley Periodicals, Inc. Biopolymers 93:497–508, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Screening and characterization of anti‐SEB peptides using a bacterial display library and microfluidic magnetic sorting

Bacterial peptide display libraries enable the rapid and efficient selection of peptides that have high affinity and selectivity toward their targets. Using a 15‐mer random library on the outer surface of Escherichia coli (E.coli), high‐affinity peptides were selected against a staphylococcal enterotoxin B (SEB) protein after four rounds of biopanning. On‐cell screening analysis of affinity and specificity were measured by flow cytometry and directly compared to the synthetic peptide, off‐cell, using peptide‐ELISA. DNA sequencing of the positive clones after four rounds of microfluidic magnetic sorting (MMS) revealed a common consensus sequence of (S/T)CH(Y/F)W for the SEB‐binding peptides R338, R418, and R445. The consensus sequence in these bacterial display peptides has similar amino acid characteristics with SEB peptide sequences isolated from phage display. The K_d measured by peptide‐ELISA off‐cell was 2.4 nM for R418 and 3.0 nM for R445. The bacterial peptide display methodology using the semiautomated MMS resulted in the discovery of selective peptides with affinity for a food safety and defense threat. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Journal of Molecular Recognition published by John Wiley & Sons, Ltd.     

Identification of Amino Acids Essential for Antibody Binding by mRNA-Display Using a Random Peptide Library: An Anti-Human Tumor Protein p53 Antibody as a Model

Using a synthetic DNA library coding for random 10-amino acid peptides (R10aPL), mRNA-display was applied to the isolation of interactive peptides using a monoclonal antibody against human TP53 (hTP53) as a model. Display molecules consisting of peptides and the nucleotide sequences encoding them were synthesized in vitro and subjected to four to five cycles of affinity selection. Thirty-four clones each isolated in the 4th or 5th round were sequenced. A core sequence, (X)-S-D-L-(Z)-K-L essential for binding was found, in which (X) and (Z), though undefined, were mostly F or Y and W, respectively. Although no peptides that fully matched with hTP53 were found in the clones isolated, the core sequence was found in hTP53. A 10-amino acid peptide containing the core sequence was chemically synthesized to verify its binding with SPR. Its Kd value for the antibody was 6 nM. The amino acids in epitopes essential for binding could be identified by mRNA-display with R10aPL.     

Mycobacterium tuberculosis class II apurinic/apyrimidinic‐endonuclease/3′‐5′ exonuclease III exhibits DNA regulated modes of interaction with the sliding DNA β‐clamp

The class‐II AP‐endonuclease (XthA) acts on abasic sites of damaged DNA in bacterial base excision repair. We identified that the sliding DNA β‐clamp forms in vivo and in vitro complexes with XthA in Mycobacterium tuberculosis. A novel ₂₃₉QLRFPKK₂₄₅ motif in the DNA‐binding domain of XthA was found to be important for the interactions. Likewise, the peptide binding‐groove (PBG) and the C‐terminal of β‐clamp located on different domains interact with XthA. The β‐clamp‐XthA complex can be disrupted by clamp binding peptides and also by a specific bacterial clamp inhibitor that binds at the PBG. We also identified that β‐clamp stimulates the activities of XthA primarily by increasing its affinity for the substrate and its processivity. Additionally, loading of the β‐clamp onto DNA is required for activity stimulation. A reduction in XthA activity stimulation was observed in the presence of β‐clamp binding peptides supporting that direct interactions between the proteins are necessary to cause stimulation. Finally, we found that in the absence of DNA, the PBG located on the second domain of the β‐clamp is important for interactions with XthA, while the C‐terminal domain predominantly mediates functional interactions in the substrate's presence.     

Modulation of SHP‐1 phosphatase activity by monovalent and bivalent SH2 phosphopeptide ligands

A sequence derived from the epithelial receptor tyrosine kinase Ros (pY2267) represents a high‐affinity binding partner for protein tyrosine phosphatase SHP‐1 and was recently used as lead structure to analyze the recognition requirements for the enzyme's N‐SH2 domain. Here, we focused on a set of peptides comprising C‐terminally extended linear and conformationally constrained side chain‐bridged cyclic N‐SH2 ligands based on the consensus sequence LxpYhxh(h/b)(h/b) (x = any amino acid, h = hydrophobic, and b = basic residue). Furthermore, the bivalent peptides described were designed to modulate the activity of SHP‐1 through binding to both, the N‐SH2 domain as well as an independent binding site on the surface of the catalytic domain (PTP domain). Consistent with previous experimental findings, surface plasmon resonance experiments revealed dissociation constants of most compounds in the low micromolar range. One peptide, EGLNpYc[KVD]MFPAPEEE? NH₂, displayed favorable binding affinity, but reduced ability to stimulate SHP‐1. Docking experiments revealed that the binding of this ligand occurs in binding mode I, recently described to lead to an inhibited activation of SHP‐1. In summary, results presented in this study suggest that inhibitory N‐SH2 ligands of SHP‐1 may be obtained by designing bivalent compounds that associate with the N‐SH2 domain and simultaneously occupy a specific binding site on the PTP domain. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 102–112, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The pH sensitivity of histidine‐contain‐ ing lytic peptides

Many bioactive peptides are featured by their unique amino acid compositions such as argine/lysine‐rich peptides. However, histidine‐rich bioactive peptides are hardly found. In this study, histidine‐containing peptides were constructed by selectively replacing the corresponded lysine residues in a lytic peptide LL‐1 with histidines. Interestingly, all resulting peptides demonstrated pH‐dependent activities. The cell lysis activities of these peptides could be increased up to four times as the solution pHs dropped from pH = 7.4 to pH = 5.5. The pH sensitivity of a histidine‐containing peptide was determined by histidine substitution numbers. Peptide derivatives with more histidines were associated with increased pH sensitivity. Results showed that not the secondary structures but pH‐affected cell affinity changes were responsible for the pH‐dependent activities of histidine‐containing peptides. The histidine substitution approach demonstrated here may present a general strategy to construct bioactive peptides with desired pH sensitivity for various applications. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Acidic amino acid-rich sequences as binding sites of osteonectin to hydroxyapatite crystals

Osteonectin, an acidic noncollagenous protein of bone and dentin, has affinity to hydroxyapatite crystals. Binding sites to hydroxyapatite of this protein were determined by a proteolytic experiment and an in vitro binding experiment using synthetic peptide analogues. Osteonectin was adsorbed on hydroxyapatite crystals and digested with trypsin. A peptide was left adsorbed on the crystal even after the digestion. The peptide was identified as an amino terminal peptide containing glutamic acid-rich sequences, which have been assumed to be possible hydroxyapatite-binding sites. Poly glutamic acid sequences were synthesized as models of the binding sites. Glu₆ peptide was bound to the hydroxyapatite with a dissociation constant of 2.4 μM. Peptides containing fewer glutamic acids had lower affinity to the crystal. Effects of these peptides on in vitro mineralization were examined by a gel system in microtiter plates. The Glu₆ peptide had a positive effect on the mineralization in this system, whereas Asp₆ peptide had a negative effect. These effects indicate the presence of an interaction between these peptides and mineral crystals.