A strained DNA binding helix is conserved for site recognition,folding nucleation,and conformational modulation

Nucleic acid recognition is often mediated by α‐helices or disordered regions that fold into α‐helix on binding. A peptide bearing the DNA recognition helix of HPV16 E2 displays type II polyproline (PII) structure as judged by pH, temperature, and solvent effects on the CD spectra. NMR experiments indicate that the canonical α‐helix is stabilized at the N‐terminus, while the PII forms at the C‐terminus half of the peptide. Re‐examination of the dihedral angles of the DNA binding helix in the crystal structure and analysis of the NMR chemical shift indexes confirm that the N‐terminus half is a canonical α‐helix, while the C‐terminal half adopts a 3₁₀ helix structure. These regions precisely match two locally driven folding nucleii, which partake in the native hydrophobic core and modulate a conformational switch in the DNA binding helix. The peptide shows only weak and unspecific residual DNA binding, 10⁴‐fold lower affinity, and 500‐fold lower discrimination capacity compared with the domain. Thus, the precise side chain conformation required for modulated and tight physiological binding by HPV E2 is largely determined by the noncanonical strained α‐helix conformation, “presented” by this unique architecture. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 432–443, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR studies of an immunomodulatory benzodiazepine binding to its molecular target on the mitochondrial F1F0‐ATPase

Bz‐423 is an inhibitor of the mitochondrial F₁F₀‐ATPase, with therapeutic properties in murine models of immune diseases. Here, we study the binding of a water‐soluble Bz‐423 analog (5‐(3‐(aminomethyl)phenyl)‐7‐chloro‐ 1‐methyl‐3‐(naphthalen‐2‐ylmethyl)‐1H‐benzo][e][1,4]diazepin‐2(3H)‐one); (1) to its target subunit on the enzyme, the oligomycin sensitivity conferring protein (OSCP), by NMR spectroscopy using chemical shift perturbation and cross‐relaxation experiments. Titration experiments with constructs representing residues 1–120 or 1–145 of the OSCP reveals that (a) 1 binds to a region of the protein, at the minimum, comprising residues M51, L56, K65, V66, K75, K77, and N92, and (b) binding of 1 induces conformational changes in the OSCP. Control experiments employing a variant of 1 in which a key binding element on the small molecule was deleted; it had no perturbational effect on the spectra of the OSCP, which indicates that the observed changes with 1 represent specific binding interactions. Collectively, these data suggest that 1 might inhibit the enzyme through an allosteric mechanism where binding results in conformational changes that perturb the OSCP‐F₁ interface resulting in disrupted communication between the peripheral stalk and the F₁‐domain of the enzyme. © 2009 Wiley Periodicals, Inc. Biopolymers 29: 85–92, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Characterization of a pectic polysaccharide from the leaves of Diospyros kaki and its modulating activity on lymphocyte proliferation

Pectin is a group of carbohydrate polymers constructing the primary cell walls and the middle lamella of terrestrial plants. Herein, we demonstrated the structure and immunomodulatory activity of the major pectic polysaccharide DL‐3B₂ isolated from the leaves of Diospyros kaki. Based on composition analysis, methylation analysis, two‐step acid hydrolysis, lithium‐mediated selective degradation, ¹³C NMR spectroscopy, and electrospray ionization mass spectrometry, DL‐3B₂ was found to contain an α‐1, 4‐linked galacturonic acid (GalA) backbone with some insertions of α‐1, 2‐linked rhamnose residues. The arabinan‐ and arabinogalactan‐side chains were attached to O‐4 of the rhamnose residues, whereas the linear arabinoxylan was probably linked to O‐3 of the GalA residues. Immunological tests in vitro showed that DL‐3B₂ could help stimulate lipopolysaccharide‐induced B lymphocyte proliferation, but not ConA‐induced T lymphocyte proliferation, and that the arabinose residues play a role in maintaining this immunological activity. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 649–656, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The immunosuppressive activity and solution structures of ubiquitin fragments

Recently, ubiquitin was suggested as a promising anti‐inflammatory protein therapeutic. We found that a peptide fragment corresponding to the ubiquitin^50–59 sequence (LEDGRTLSDY) possessed the immunosuppressive activity comparable with that of ubiquitin. CD and NMR spectroscopies were used to determine the conformational preferences of LEDGRTLSDY in solution. The peptide mixture, obtained by pepsin digestion of ubiquitin, was even more potent than the intact protein. Although the peptide exhibited a well‐defined conformation in methanol, its structure was distinct from the corresponding 50–59 fragment in the native ubiquitin molecule. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 423–431, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Effect of the ΔPhe residue configuration on a didehydropeptides conformation: A combined CD and NMR study

Conformations of two pairs of dehydropeptides with the opposite configuration of the ΔPhe residue, Boc‐Gly‐Δ^ZPhe‐Gly‐Phe‐OMe ( Z‐ OMe ), Boc‐Gly‐Δ^EPhe‐Gly‐Phe‐OMe ( E‐ OMe ), Boc‐Gly‐Δ^ZPhe‐Gly‐Phe‐p‐NA ( Z‐p‐ NA ), and Boc‐Gly‐Δ^EPhe‐Gly‐Phe‐p‐NA ( E‐p‐ NA ) were compared on the basis of CD and NMR studies in MeOH, trifluoroethanol (TFE), MeCN, chloroform, and dimethylsulfoxide (DMSO). The CD results were used as the additional input data for the NMR‐based determination of the detailed solution conformations of the peptides. It was found that E‐ OMe is unordered and Z‐ OMe , Z‐p‐ NA , and E‐p‐ NA adopt the β‐turn conformation. There are two overlapping β‐turns in each of those peptides: type II and type III′ in Z‐ OMe and Z‐p‐ NA , and two type III in E‐p‐ NA . The ordered structure‐inducing properties of Δ^ZPhe and Δ^EPhe in the peptides studied depend on the C‐terminal blocking group. In methyl esters, the Δ^ZPhe residue is a strong inducer of ordered conformations whereas the Δ^EPhe one has no such properties. In p‐nitroanilides, both isomers of ΔPhe cause the peptides to adopt ordered structures to a similar extent. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1055–1064, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of some soluble elastins by means of FT‐IR and 2D IR correlation spectroscopy

Fourier transform infrared (FT‐IR) spectroscopy combined with 2D correlation spectroscopy has been used to offer some information about stability and structure of some soluble elastins. Temperature has been chosen as the perturbation to monitor the infrared behavior of various soluble elastins, namely, α‐elastin p, α‐elastin, and k‐elastin. In the 3800–2700 cm^?1 region, the H‐containing groups were analyzed. The bonded hydroxyls are found to decrease prior to the NH‐related hydrogen bonds and also to the conformational reorganization of hydrocarbon chains. The transition temperatures were evaluated and they were found to agree with those obtained from DSC data. The FTIR spectra and their 2nd derivatives denote that α‐ elastins exhibited amide‐I, ‐II and ‐III bands at 1656, 1539 and 1236 cm^?1, respectively, while in k‐elastin these bands were found at 1652 cm^?1 for amide I, 1540 cm^?1 for amide II and 1248 cm^?1 for amide III. The macroscopic IR finger‐print method, which combines: general IR spectra, secondary derivative spectra, and 2D‐IR correlation spectra, is useful to discriminate different elastins. Thus using the differences of the position and intensity of the bands from “fingerprint region” of studied elastins, which include the peaks assigned to C?O, C? C groups from α‐helix, β‐turn, and the peaks assigned to the amide groups, it is possible to identify and discriminate elastins from each others. Furthermore, the pattern of 2D‐IR correlation spectra under thermal perturbation, allow their direct identification and discrimination. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1072–1084, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Kinetics of the self‐aggregation and film formation of poly‐L‐proline at high temperatures explored by circular dichroism spectroscopy

Poly‐L ‐proline has been used as a model system for various purposes over a period of more than 60 years. Its relevance among the protein/peptide community stems from its use as a reference system for determining the conformational distributions of unfolded peptides and proteins, its use as a molecular ruler, and from the pivotal role of proline residues in conformational transitions and protein–protein interactions. While several studies indicate that polyproline can aggregate and precipitate in aqueous solution, a systematic study of the aggregation process is still outstanding. We found, by means of UV‐circular dichroism and IR measurements, that polyproline is predominately monomeric at room temperature at millimolar concentrations. Upon heating, the polypeptide stays in its monomeric state until the temperature reaches a threshold of ca. 60°C. At higher temperatures, the peptide aggregates as a film on the inside surface of the employed cuvette. The process proceeds on a time scale of 10³ s and can best be described by a bi‐exponential relaxation function. The respective CD and IR spectra are qualitatively different from the canonical spectra of polyproline in aqueous solution, and are indicative of a highly packed state. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 451–457, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR structure of rALF‐Pm3, an anti‐lipopolysaccharide factor from shrimp: Model of the possible lipid A‐binding site

The anti‐lipopolysaccharide factor ALF‐Pm3 is a 98‐residue protein identified in hemocytes from the black tiger shrimp Penaeus monodon. It was expressed in Pichia pastoris from the constitutive glyceraldehyde‐3‐phosphate dehydrogenase promoter as a folded and ¹⁵N uniformly labeled rALF‐Pm3 protein. Its 3D structure was established by NMR and consists of three α‐helices packed against a four‐stranded β‐sheet. The C³⁴? C⁵⁵ disulfide bond was shown to be essential for the structure stability. By using surface plasmon resonance, we demonstrated that rALF‐Pm3 binds to LPS, lipid A and to OM®‐174, a soluble analogue of lipid A. Biophysical studies of rALF‐Pm3/LPS and rALF‐Pm3/OM®‐174 complexes indicated rather high molecular sized aggregates, which prevented us to experimentally determine by NMR the binding mode of these lipids to rALF‐Pm3. However, on the basis of striking structural similarities to the FhuA/LPS complex, we designed an original model of the possible lipid A‐binding site of ALF‐Pm3. Such a binding site, located on the ALF‐Pm3 β‐sheet and involving seven charged residues, is well conserved in ALF‐L from Limulus polyphemus and in ALF‐T from Tachypleus tridentatus. In addition, our model is in agreement with experiments showing that β‐hairpin synthetic peptides corresponding to ALF‐L β‐sheet bind to LPS. Delineating lipid A‐binding site of ALFs will help go further in the de novo design of new antibacterial or LPS‐neutralizing drugs. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 207–220, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mechanism of formation of the C‐terminal β‐hairpin of the B3 domain of the immunoglobulin‐binding protein G from Streptococcus. IV. Implication for the mechanism of folding of the parent protein

A 34‐residue α/β peptide [IG(28–61)], derived from the C‐terminal part of the B3 domain of the immunoglobulin binding protein G from Streptoccocus, was studied using CD and NMR spectroscopy at various temperatures and by differential scanning calorimetry. It was found that the C‐terminal part (a 16‐residue‐long fragment) of this peptide, which corresponds to the sequence of the β‐hairpin in the native structure, forms structure similar to the β‐hairpin only at T = 313 K, and the structure is stabilized by non‐native long‐range hydrophobic interactions (Val47–Val59). On the other hand, the N‐terminal part of IG(28–61), which corresponds to the middle α‐helix in the native structure, is unstructured at low temperature (283 K) and forms an α‐helix‐like structure at 305 K, and only one helical turn is observed at 313 K. At all temperatures at which NMR experiments were performed (283, 305, and 313 K), we do not observe any long‐range connectivities which would have supported packing between the C‐terminal (β‐hairpin) and the N‐terminal (α‐helix) parts of the sequence. Such interactions are absent, in contrast to the folding pathway of the B domain of protein G, proposed recently by Kmiecik and Kolinski (Biophys J 2008, 94, 726–736), based on Monte‐Carlo dynamics studies. Alternative folding mechanisms are proposed and discussed. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 469–480, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mg2+ ions bind at the C‐terminal region of skeletal muscle α‐tropomyosin

Tropomyosin (Tm) is a dimeric coiled‐coil protein that polymerizes through head‐to‐tail interactions. These polymers bind along actin filaments and play an important role in the regulation of muscle contraction. Analysis of its primary structure shows that Tm is rich in acidic residues, which are clustered along the molecule and may form sites for divalent cation binding. In a previous study, we showed that the Mg²⁺‐induced increase in stability of the C‐terminal half of Tm is sensitive to mutations near the C‐terminus. In the present report, we study the interaction between Mg²⁺ and full‐length Tm and smaller fragments corresponding to the last 65 and 26 Tm residues. Although the smaller Tm peptide (Tm_{259‐284(W269)}) is flexible and to large extent unstructured, the larger Tm_{220‐284(W269)} fragment forms a coiled coil in solution whose stability increases significantly in the presence of Mg²⁺. NMR analysis shows that Mg²⁺ induces chemical shift perturbations in both Tm_{220‐284(W269)} and Tm_{259‐284(W269)} in the vicinity of His276, in which are located several negatively charged residues. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 583–590, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Importance of the spatial display of charged residues in heparin–peptide interactions

Many studies have examined consensus sequences required for protein‐glycosaminoglycan interactions. Through the synthesis of helical heparin binding peptides, this study probes the relationship between spatial arrangement of positive charge and heparin binding affinity. Peptides with a linear distribution of positive charge along one face of the α‐helix had the highest affinity for heparin. Moving the basic residues away from a single face resulted in drastic changes in heparin binding affinity of up to three orders of magnitude. These findings demonstrate that amino acid sequences, different from the known heparin binding consensus sequences, will form high affinity protein‐heparin binding interactions when the charged residues are aligned linearly. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 290–298, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Diverse modes of 5′‐[4‐(aminoiminomethyl)phenyl]‐[2,2′‐bifuran]‐5‐carboximidamide (DB832) interaction with multi‐stranded DNA structures

The modes of binding of 5′‐[4‐(aminoiminomethyl)phenyl]‐[2,2′‐Bifuran]‐5‐carboximidamide (DB832) to multi‐stranded DNAs: human telomere quadruplex, monomolecular R‐triplex, pyr/pur/pyr triplex consisting of 12 T*(T·A) triplets, and DNA double helical hairpin were studied. The optical adsorption of the ligand was used for monitoring the binding and for determination of the association constants and the numbers of binding sites. CD spectra of DB832 complexes with the oligonucleotides and the data on the energy transfer from DNA bases to the bound DB832 assisted in elucidating the binding modes. The affinity of DB832 to the studied multi‐stranded DNAs was found to be greater (K_ass ≈ 10⁷M^?1) than to the duplex DNA (K_ass ≈ 2 × 10⁵M^?1). A considerable stabilizing effect of DB832 binding on R‐triplex conformation was detected. The nature of the ligand tight binding differed for the studied multi‐stranded DNA depending on their specific conformational features: recombination‐type R‐triplex demonstrated the highest affinity for DB832 groove binding, while pyr/pur/pyr TTA triplex favored DB832 intercalation at the end stacking contacts and the human telomere quadruplex d[AG₃(T₂AG₃)₃] accommodated the ligand in a capping mode. Additionally, the pyr/pur/pyr TTA triplex and d[AG₃(T₂AG₃)₃] quadruplex bound DB832 into their grooves, though with a markedly lesser affinity. DB832 may be useful for discrimination of the multi‐sranded DNA conformations and for R‐triplex stabilization. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 8–20, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Hyperglucosylated adhesin‐derived peptides as antigenic probes in multiple sclerosis: Structure optimization and immunological evaluation

Peptides mimicking antigenic epitopes targeted by antibodies can be powerful tools to be used as antigen surrogates for the specific diagnosis and treatment of autoimmune diseases. Obtaining structural insights about the nature of peptide–antibody interaction in complex mixtures such as sera is a critical goal. In multiple sclerosis (MS), we previously demonstrated that the N‐linked β‐d ‐glucopyranosyl moieties (N‐Glc) containing epitopes in nontypeable Haemophilus influenzae adhesin C‐terminal portion HMW1(1205–1526) were essential for high‐affinity antibody binding in a subpopulation of MS patients. With the aim of developing peptide probes and assessing their binding properties to antibodies from sera of representative patients, we performed the systematic analysis of synthetic peptides based on HMW1(1347–1354) fragment bearing one or two N‐Glc respectively on Asn‐1349 and/or Asn‐1352. The N‐glucosylated nonapeptides efficiently bind to IgG antibodies, displaying IC₅₀ in the range 10^?8–10^?10 M by competitive indirect enzyme‐linked immunosorbent assay (ELISA) in three representative MS patient sera. We selected the di‐N‐glucosylated adhesin peptide Ac‐KAN (Glc)VTLN (Glc)TT‐NH₂ as the shortest sequence able to inhibit high‐avidity interaction with N‐Glc targeting IgM antibodies. Nuclear magnetic resonance (NMR)‐ and circular dichroism (CD)‐based characterization showed that the binding properties of these antigens could not be ascribed to structural differences induced by the presence of up to two N‐glucosyl moieties. Therefore, the antibody binding is not easily correlated to the position of the sugar or to a determined conformation in water.     

NMR structure of duplex DNA containing the α‐OH‐PdG·dA base pair: A mutagenic intermediate of acrolein

Acrolein, a cell metabolic product and main component of cigarette smoke, reacts with DNA generating α‐OH‐PdG lesions, which have the ability to pair with dATP during replication thereby causing G to T transversions. We describe the solution structure of an 11‐mer DNA duplex containing the mutagenic α‐OH‐PdG·dA base pair intermediate, as determined by solution nuclear magnetic resonance (NMR) spectroscopy and retrained molecular dynamics (MD) simulations. The NMR data support a mostly regular right‐handed helix that is only perturbed at its center by the presence of the lesion. Undamaged residues of the duplex are in anti orientation, forming standard Watson‐Crick base pairs alignments. Duplication of proton signals at and near the damaged base pair reveals the presence of two enantiomeric duplexes, thus establishing the exocyclic nature of the lesion. The α‐OH‐PdG adduct assumes a syn conformation pairing to its partner dA base that is protonated at pH 6.6. The three‐dimensional structure obtained by restrained molecular dynamics simulations show hydrogen bond interactions that stabilize α‐OH‐PdG in a syn conformation and across the lesion containing base pair. We discuss the implications of the structures for the mutagenic bypass of acrolein lesions. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 391–401, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mercury(II) promotes the in vitro aggregation of tau fragment corresponding to the second repeat of microtubule‐binding domain: Coordination and conformational transition

The loss of metal homeostasis and the toxic effect of metal ion are important events in neurodegenerative and age‐related diseases, such as Alzheimer's disease (AD). For the first time, we investigated the impacts of mercury(II) ions on the folding and aggregation of Alzheimer's tau fragment R2 (residues 275‐305: VQIIN KKLDL SNVQS KCGSK DNIKH VPGGGS), corresponding to the second repeat unit of the microtubule‐binding domain, which was believed to be pivotal to the biochemical properties of full tau protein. By ThS fluorescence assay and electron microscopy, we found that mercury(II) dramatically promoted heparin‐induced aggregation of R2 at an optimum molar ratio of 1: 2 (metal: protein), and the resulting R2 filaments became smaller. Isothermal titration calorimetry (ITC) experiment revealed that the strong coordination of mercury(II) with R2 was an enthalpy‐controlled, entropy‐decreased thermodynamic process. The exceptionally large magnitude of heat release (ΔH₁ = ?34.8 Kcal mol^?1) suggested that the most possible coordinating site on the R2 peptide chain was the thiol group of cysteine residue (Cys291), and this was further confirmed by a control experiment using Cys291 mutated R2. Circular dichroism spectrum demonstrated that this peptide underwent a significant conformational change from random coil to β‐turn structure upon its binding to mercury(II) ion. This study was undertaken to better understand the mechanism of tau aggregation, and evaluate the possible role of mercury(II) in the pathogenesis of AD. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1100–1107, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Thermal stability and conformational structure of salmon calcitonin in the solid and liquid states

Salmon calcitonin (sCT) was selected as a model protein drug for investigating its intrinsic thermal stability and conformational structure in the solid and liquid states by using a Fourier transform infrared (FT‐IR) microspectroscopy with or without utilizing thermal analyzer. The spectral correlation coefficient (r) analysis between two second‐derivative IR spectra was applied to quantitatively estimate the structural similarity of sCT in the solid state before and after different treatments. The thermal FT‐IR microspectroscopic data clearly evidenced that sCT in the solid state was not effected by temperature and had a thermal reversible property during heating–cooling process. Moreover, the high r value of 0.973 or 0.988 also evidenced the structural similarity of solid‐state sCT samples before and after treatments. However, sCT in H₂O exhibited protein instability and thermal irreversibility after incubation at 40°C. The temperature‐induced conformational changes of sCT in H₂O was occurred to transform the α‐helix/random coil structures to β‐sheet structure and also resulted in the formation of intramolecular and intermolecular β‐sheet structures. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 200–207, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Hexamer oligonucleotide topology and assembly under solution phase NMR and theoretical modeling scrutiny

The entire family of noncomplementary hexamer oligodeoxyribonucleotides d(GCXYGC) (X and Y = A, G, C, or T) were assessed for topological indicators and equilibrium thermodynamics using a priori molecular modeling and solution phase NMR spectroscopy. Feasible modeled hairpin structures formed a basis from which solution structure and equilibria for each oligonucleotide were considered. ¹H and ³¹P variable temperature‐dependent (VT) and concentration‐dependent NMR data, NMR signal assignments, and diffusion parameters led to d(GCGAGC) and d(GCGGGC) being understood as exceptions within the family in terms of self‐association and topological character. A mean diffusion coefficient D_{298 K} = (2.0 ± 0.07) × 10^?10 m² s^?1 was evaluated across all hexamers except for d(GCGAGC) (D_{298 K} = 1.7 × 10^?10 m² s^?1) and d(GCGGGC) (D_{298 K} = 1.2 × 10^?10 m² s^?1). Melting under VT analysis (T_m = 323 K) combined with supporting NMR evidence confirmed d(GCGAGC) as the shortest tandem sheared GA mismatched duplex. Diffusion measurements were used to conclude that d(GCGGGC) preferentially exists as the shortest stable quadruplex structure. Thermodynamic analysis of all data led to the assertion that, with the exception of XY = GA and GG, the remaining noncomplementary oligonucleotides adopt equilibria between monomer and duplex, contributed largely by monomer random‐coil forms. Contrastingly, d(GCGAGC) showed preference for tandem sheared GA mismatch duplex formation with an association constant K = 3.9 × 10⁵M^?1. No direct evidence was acquired for hairpin formation in any instance although its potential existence is considered possible for d(GCGAGC) on the basis of molecular modeling studies. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1023–1038, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

VCD spectroscopic properties of the β‐hairpin forming miniprotein CLN025 in various solvents

Electronic and vibrational circular dichroism are often used to determine the secondary structure of proteins, because each secondary structure has a unique spectrum. Little is known about the vibrational circular dichroic spectroscopic features of the β‐hairpin. In this study, the VCD spectral features of a decapeptide, YYDPETGTWY (CLN025), which forms a stable β‐hairpin that is stabilized by intramolecular weakly polar interactions and hydrogen bonds were determined. Molecular dynamics simulations and ECD spectropolarimetry were used to confirm that CLN025 adopts a β‐hairpin in water, TFE, MeOH, and DMSO and to examine differences in the secondary structure, hydrogen bonds, and weakly polar interactions. CLN025 was synthesized by microwave‐assisted solid phase peptide synthesis with N^α‐Fmoc protected amino acids. The VCD spectra displayed a (?,+,?) pattern with bands at 1640 to 1656 cm^?1, 1667 to 1687 cm^?1, and 1679 to 1686 cm^?1 formed by the overlap of a lower frequency negative couplet and a higher frequency positive couplet. A maximum IR absorbance was observed at 1647 to 1663 cm^?1 with component bands at 1630 cm^?1, 1646 cm^?1, 1658 cm^?1, and 1675 to 1680 cm^?1 that are indicative of the β‐sheet, random meander, either random meander or loop and turn, respectively. These results are similar to the results of others, who examined the VCD spectra of β‐hairpins formed by ^DPro‐Xxx turns and indicated that observed pattern is typical of β‐hairpins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 442–450, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com