Studies on formation and stability of the d[G(AG)5]* d[G(AG)5]·d[C(TC)5] and d[G(TG)5]* d[G(AG)5]· d[C(TC)5] triple helices

We have targeted the d[G(AG)₅] · d[C(TC)₅] duplex for triplex formation at neutral pH with either d[G(AG)₅] or d[G(TG)₅]. Using a combination of gel electrophoresis, uv and CD spectra, mixing and melting curves, along with DNase I digestion studies, we have investigated the stability of the 2:1 pur*pur · pyr triplex, d[G(AG)₅] * d[G(AG)₅] · d[C(TC)₅], in the presence of MgCl₂. This triplex melts in a monophasic fashion at the same temperature as the underlying duplex. Although the uv spectrum changes little upon binding of the second purine strand, the CD spectrum shows significant changes in the wavelength range 200–230 nm and about a 7 nm shift in the positive band near 270 nm. In contrast, the 1:1:1 pur/pyr*pur · pyr triplex, d[G(TG)₅] * d[G(AG)₅] · d[C(TC)₅], is considerably less stable thermally, melting at a much lower temperature than the underlying duplex, and possesses a CD spectrum that is entirely negative from 200 to 300 nm. Ethidium bromide undergoes a strong fluorescence enhancement upon binding to each of these triplexes, and significantly stabilizes the pur/pyr*pur · pyr triplex. The uv melting and differential scanning calorimetry analysis of the alternating sequence duplex and pur*pur · pyr triplex shows that they are lower in thermodynamic stability than the corresponding 10-mer d(G₃A₄G₃) · d(C₃T₄C₃) duplex and its pur*pur · pyr triplex under identical solution conditions. © 1997 John Wiley & Sons, Inc.     

An integrated molecular dynamics (MD) and experimental study of higher order human telomeric quadruplexes

Structural knowledge of telomeric DNA is critical for understanding telomere biology and for the utilization of telomeric DNA as a therapeutic target. Very little is known about the structure of long human DNA sequences that may form more than one quadruplex unit. Here, we report a combination of molecular dynamics simulations and experimental biophysical studies to explore the structural and dynamic properties of the human telomeric sequence (TTAGGG)₈TT that folds into two contiguous quadruplexes. Five higher order quadruplex models were built combining known single human telomeric quadruplex structures as unique building blocks. The biophysical properties of this sequence in K⁺ solution were experimentally investigated by means of analytical ultracentrifugation and UV spectroscopy. Additionally, the environments of loop adenines were probed by fluorescence studies using systematic single‐substitutions of 2‐aminopurine for the adenine bases. The comparison of the experimentally determined properties with the corresponding quantities predicted from the models allowed us to test the validity of each of the structural models. One model emerged whose properties are most consistent with the predictions, and which therefore is the most probable structure in solution. This structure features contiguous quadruplex units in an alternating hybrid‐1‐hybrid‐2 conformation with a highly ordered interface composed of loop residues from both quadruplexes © 2010 Wiley Periodicals, Inc. Biopolymers 93:533–548, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Conformational evaluation of labeled C3′‐O‐P‐13CH2‐O‐C4″ phosphonate internucleotide linkage,a phosphodiester isostere

Modified internucleotide linkage featuring the C3′‐O‐P‐CH₂‐O‐C4″ phosphonate grouping as an isosteric alternative to the phosphodiester C3′‐O‐P‐O‐CH₂‐C4″ bond was studied in order to learn more on its stereochemical arrangement, which we showed earlier to be of prime importance for the properties of the respective oligonucleotide analogues. Two approaches were pursued: First, the attempt to prepare the model dinucleoside phosphonate with ¹³C‐labeled CH₂ group present in the modified internucleotide linkage that would allow for a more detailed evaluation of the linkage conformation by NMR spectroscopy. Second, the use of ab initio calculations along with molecular dynamics (MD) simulations in order to observe the most populated conformations and specify main structural elements governing the conformational preferences. To deal with the former aim, a novel synthesis of key labeled reagent (CH₃O)₂P(O)¹³CH₂OH for dimer preparation had to be elaborated using aqueous ¹³C‐formaldehyde. The results from both approaches were compared and found consistent. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 514–529, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Studies of the Activity of Peroxidase‐Like DNAzyme by Modifying 3′‐ or 5′‐End of Aptamers

In the presence of hemin and under appropriate conditions, some modalities of G‐quadruplexes can form a peroxidase‐like DNAzyme that has been widely used in biology. Structure? function studies on the DNAzyme revealed that its catalytic ability may be dependent on the unimolecular parallel G‐quadruplex. In this report, we present the preliminary investigation on the relationship between the structure and function of DNAzymes through a terminal oligo modification in G‐quadruplex sequences by adding different lengths of oligo‐dT to the 3′‐ or 5′‐end of the aptamers. The results suggested that adding dT_n to the 5′‐end of the DNA sequence of the enzyme improved the ability of hemin to bind with DNA, but the addition of dT_n to the 3′‐end decreased the binding ability of hemin for DNA. The increased stability of the assembled DNAzyme would lead to more favorable binding between the enzyme and substrate (H₂O₂), facilitating higher peroxidase activity; on the contrary, with lower stability of the DNAzyme complex, we observed reduced peroxidase activity.     

Oligomerization of adenosin‐5′‐O‐ylmethylphosphonate,an isopolar AMP analogue: Evaluation of the route to short oligoadenylates

In an attempt to prepare a library of short oligoadenylate analogues featuring both the enzyme‐stable internucleotide linkage and the 5′‐O‐methylphosphonate moiety and thus obtain a pool of potential RNase L agonists/antagonists, we studied the spontaneous polycondensation of the adenosin‐5′‐O‐ylmethylphosphonic acid (p_cA), an isopolar AMP analogue, and its imidazolide derivatives employing N,N′‐dicyclohexylcarbodiimide under nonaqueous conditions and uranyl ions under aqueous conditions, respectively. The RP LC–MS analyses of the reaction mixtures per se, and those obtained after the periodate treatment, along with analyses and separations by capillary zone electrophoresis, allowed us to characterize major linear and cyclic oligoadenylates obtained. The structure of selected compounds was supported, after their isolation, by NMR spectroscopy. Ab initio calculation of the model structures simulating the AMP‐imidazolide and p_cA‐imidazolide offered the explanation why the latter compound exerted, in contrast to AMP‐imidazolide, a very low stability in aqueous solutions. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 277–289, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

ILPR repeats adopt diverse G‐quadruplex conformations that determine insulin binding

The insulin‐linked polymorphic region (ILPR) is a VNTR region located upstream of the insulin (INS) gene consisting of the repeat 5′‐ACAGGGGTGTGGGG (repeat a) and several less abundant sequence repeats (b–n). Here, we have investigated the structural polymorphism of G‐quadruplexes formed from the most common repeat sequences (a–c) and their effect on insulin protein binding. We first established that the ILPR repeats “b” and “c” can form quadruplex structures. Insulin has previously been shown to bind a G‐quadruplex formed by a dimer of the repeat “a”. Our findings show that insulin binds preferentially to the repeat “a” G‐quadruplex (K_d = 0.17 ± 0.03 μM) over G‐quadruplexes formed from other ILPR repeats that were tested (K_ds from 0.71 ± 0.15 to 1.07 ± 0.09 μM). Additionally, the Watson‐Crick complementary relationship between the loop regions of repeat “a” (ACA and TGT) seemingly play an important role in favoring a specific G‐quadruplex conformation, which based on our data is critical for insulin binding. Affinity for insulin is reduced in sequences lacking the putative WC complementarity, however upon engineered restoration of complementarity, insulin binding is recovered. A DMS footprinting assay on the repeat “a” G‐quadruplex in the presence of insulin, combined with binding affinities for ILPR mutants led to identification of a loop nucleotide critical for binding. Uniquely, insulin shows clear preference for binding to the G‐quadruplexes with the more antiparallel feature. Collectively, our results illustrate the specific nature of insulin binding to the ILPR G‐quadruplexes and begin to provide molecular details on such interactions. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 21–31, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural transition from dimeric to tetrameric i‐motif,caused by the presence of TAA at the 3′‐end of human telomeric C‐rich sequence

Widely dispersed in genomic DNA, the tandem C‐rich repetitive stretches may fold below physiological pH, into i‐motif structures, stabilized by C·C⁺ pairing. Herein, structural status of a 9‐mer stretch d(CCCTAACCC), [the truncated double repeat of human telomeric sequence], and its extended version, comprising of additional ? TAA segment at the 3′‐end, representing the complete double repeat d(CCCTAACCCTAA), has been investigated. The pH dependent monophasic UV‐melting, Gel and CD data suggested that while the truncated version adopts a bimolecular i‐motif structure, its complete double repeat (12‐mer) sequence exists in two (bimolecular and tetramolecular) forms. A model is proposed for the tetramolecular i‐motif with conventional C · C⁺ base pairs, additionally stabilized by asymmetric A · A base pairs at the ?3′ TAA flanking ends and Watson–Crick A · T hydrogen bonding between intervening bases on antiparallel strands. Expanding the known topologies of DNA i‐motifs, such atypical geometries of i‐motifs may have implications in their recognition by proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 150–160, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Deciphering interactions of the aminoglycoside phosphotransferase(3′)‐IIIa with its ligands

Aminoglycoside phosphotransferase(3′)‐IIIa (APH) is the enzyme with broadest substrate range among the phosphotransferases that cause resistance to aminoglycoside antibiotics. In this study, the thermodynamic characterization of interactions of APH with its ligands are done by determining dissociation constants of enzyme–substrate complexes using electron paramagnetic resonance and fluorescence spectroscopy. Metal binding studies showed that three divalent cations bind to the apo‐enzyme with low affinity. In the presence of AMPPCP, binding of the divalent cations occurs with 7‐to‐37‐fold higher affinity to three additional sites dependent on the presence and absence of different aminoglycosides. Surprisingly, when both ligands, AMPPCP and aminoglycoside, are present, the number of high affinity metal binding sites is reduced to two with a 2‐fold increase in binding affinity. The presence of divalent cations, with or without aminoglycoside present, shows only a small effect (<3‐fold) on binding affinity of the nucleotide to the enzyme. The presence of metal–nucleotide, but not nucleotide alone, increases the binding affinity of aminoglycosides to APH. Replacement of magnesium (II) with manganese (II) lowered the catalytic rates significantly while affecting the substrate selectivity of the enzyme such that the aminoglycosides with 2′‐NH₂ become better substrates (higher V_max) than those with 2′‐OH. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 801–809, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Folding thermodynamics of the hybrid‐1 type intramolecular human telomeric G‐quadruplex

Guanine‐rich DNA sequences that may form G‐quadruplexes are located in strategic DNA loci with the ability to regulate biological events. G‐quadruplexes have been under intensive scrutiny owing to their potential to serve as novel drug targets in emerging anticancer strategies. Thermodynamic characterization of G‐quadruplexes is an important and necessary step in developing predictive algorithms for evaluating the conformational preferences of G‐rich sequences in the presence or the absence of their complementary C‐rich strands. We use a combination of spectroscopic, calorimetric, and volumetric techniques to characterize the folding/unfolding transitions of the 26‐meric human telomeric sequence d[A₃G₃(T₂AG₃)₃A₂]. In the presence of K⁺ ions, the latter adopts the hybrid‐1 G‐quadruplex conformation, a tightly packed structure with an unusually small number of solvent‐exposed atomic groups. The K⁺‐induced folding of the G‐quadruplex at room temperature is a slow process that involves significant accumulation of an intermediate at the early stages of the transition. The G‐quadruplex state of the oligomeric sequence is characterized by a larger volume and compressibility and a smaller expansibility than the coil state. These results are in qualitative agreement with each other all suggesting significant dehydration to accompany the G‐quadruplex formation. Based on our volume data, 432 ± 19 water molecules become released to the bulk upon the G‐quadruplex formation. This large number is consistent with a picture in which DNA dehydration is not limited to water molecules in direct contact with the regions that become buried but involves a general decrease in solute–solvent interactions all over the surface of the folded structure. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 216–227, 2014.     

Heating‐induced conformational change of a novel β‐(1→3)‐D‐glucan from Pleurotus geestanus

Recently, we isolated and purified a neutral polysaccharide (PGN) from edible fungus Pleurotus geestanus. Its structure was characterized by a range of physical–chemical methods, including high performance anion exchange chromatography, uronic acid, and protein analyses, size exclusion chromatography with ultraviolet, refractive index and light scattering detectors, and nuclear magnetic resonance. Our results revealed that PGN is a novel β‐(1→3)‐D ‐glucan with glucose attached to every other sugar residues at Position 6 in the backbone. It has a degree of branching of 1/2. Such structure is different from typical β‐(1→3)‐D ‐glucans schizophyllan and lentinan in which DB is 1/3 and 2/5, respectively. Rheological study showed a very interesting melting behavior of PGN in water solution: heating PGN in water leads to two transitions, in the range of 8–12.5°C and 25–60°C, respectively. The melting behavior and conformational changes were characterized by rheometry, micro‐differential scan calorimetry, atomic force microscopy, static and dynamic light scattering at different temperatures. The first heating‐induced transition corresponds to the disintegration of polymer bundles into small helical clusters, resembling the heating‐induced dissociation of SPG in water at 7°C; the second one might correspond to the dissociation of helical strands to individual chains. The ability of PGN to undergo a conformation/viscosity transition in water upon heating is very valuable to immobilize cells or enzymes or therapeutic DNA/RNA, which makes PGN a potentially useful biomaterial. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 121–131, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR structure of duplex DNA containing the α‐OH‐PdG·dA base pair: A mutagenic intermediate of acrolein

Acrolein, a cell metabolic product and main component of cigarette smoke, reacts with DNA generating α‐OH‐PdG lesions, which have the ability to pair with dATP during replication thereby causing G to T transversions. We describe the solution structure of an 11‐mer DNA duplex containing the mutagenic α‐OH‐PdG·dA base pair intermediate, as determined by solution nuclear magnetic resonance (NMR) spectroscopy and retrained molecular dynamics (MD) simulations. The NMR data support a mostly regular right‐handed helix that is only perturbed at its center by the presence of the lesion. Undamaged residues of the duplex are in anti orientation, forming standard Watson‐Crick base pairs alignments. Duplication of proton signals at and near the damaged base pair reveals the presence of two enantiomeric duplexes, thus establishing the exocyclic nature of the lesion. The α‐OH‐PdG adduct assumes a syn conformation pairing to its partner dA base that is protonated at pH 6.6. The three‐dimensional structure obtained by restrained molecular dynamics simulations show hydrogen bond interactions that stabilize α‐OH‐PdG in a syn conformation and across the lesion containing base pair. We discuss the implications of the structures for the mutagenic bypass of acrolein lesions. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 391–401, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Sequence‐dependent folding and unfolding of ligand‐bound purine riboswitches

Riboswitch regulation of gene expression requires ligand‐mediated RNA folding. From the fluorescence lifetime distribution of bound 2‐aminopurine ligand, we resolve three RNA conformers (C_o, C_i, C_c) of the liganded G‐ and A‐sensing riboswitches from Bacillus subtilis. The ligand binding affinities, and sensitivity to Mg²⁺, together with results from mutagenesis, suggest that C_o and C_i are partially unfolded species compromised in key loop‐loop interactions present in the fully folded C_c. These data verify that the ligand‐bound riboswitches may dynamically fold and unfold in solution, and reveal differences in the distribution of folded states between two structurally homologous purine riboswitches: Ligand‐mediated folding of the G‐sensing riboswitch is more effective, less dependent on Mg²⁺, and less debilitated by mutation, than the A‐sensing riboswitch, which remains more unfolded in its liganded state. We propose that these sequence‐dependent RNA dynamics, which adjust the balance of ligand‐mediated folding and unfolding, enable different degrees of kinetic discrimination in ligand binding, and fine‐tuning of gene regulatory mechanisms. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 953–965, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mg2+ ions bind at the C‐terminal region of skeletal muscle α‐tropomyosin

Tropomyosin (Tm) is a dimeric coiled‐coil protein that polymerizes through head‐to‐tail interactions. These polymers bind along actin filaments and play an important role in the regulation of muscle contraction. Analysis of its primary structure shows that Tm is rich in acidic residues, which are clustered along the molecule and may form sites for divalent cation binding. In a previous study, we showed that the Mg²⁺‐induced increase in stability of the C‐terminal half of Tm is sensitive to mutations near the C‐terminus. In the present report, we study the interaction between Mg²⁺ and full‐length Tm and smaller fragments corresponding to the last 65 and 26 Tm residues. Although the smaller Tm peptide (Tm_{259‐284(W269)}) is flexible and to large extent unstructured, the larger Tm_{220‐284(W269)} fragment forms a coiled coil in solution whose stability increases significantly in the presence of Mg²⁺. NMR analysis shows that Mg²⁺ induces chemical shift perturbations in both Tm_{220‐284(W269)} and Tm_{259‐284(W269)} in the vicinity of His276, in which are located several negatively charged residues. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 583–590, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Single‐molecule pair studies of the interactions of the α‐GalNAc (Tn‐antigen) form of porcine submaxillary mucin with soybean agglutinin

Mucins form a group of heavily O‐glycosylated biologically important glycoproteins that are involved in a variety of biological functions, including modulating immune response, inflammation, and adhesion. Mucins are also involved in cancer and metastasis and often express diagnostic cancer antigens. Recently, a modified porcine submaxillary mucin (Tn‐PSM) containing GalNAcα1‐O‐Ser/Thr residues was shown to bind to soybean agglutinin (SBA) with ～10⁶‐fold enhanced affinity relative to GalNAcα1‐O‐Ser, the pancarcinoma carbohydrate antigen. In this study, dynamic force spectroscopy is used to investigate molecular pairs of SBA and Tn‐PSM. A number of force jumps that demonstrate unbinding or rebinding events were observed up to a distance equal to 2.0 μm, consistent with the length of the mucin chain. The unbinding force increased from 103 to 402 pN with increasing force loading rate. The position of the activation barrier in the energy landscape of the interaction was 0.1 nm. The lifetime of the SBA–TnPSM complex in the absence of applied force was determined to be in the range 1.3–1.9 s. Kinetic parameters describing the rate of dissociation of other sugar lectin interactions are in the range 3.3 × 10^?3–2.5 × 10^?3 s. The long lifetime of the SBA‐TnPSM complex is compatible with a binding model in which lectin molecules “bind and jump” from α‐GalNAc residue to α‐GalNAc residue along the polypeptide chain of Tn‐PSM before dissociating. These findings have important implications for the molecular recognition properties of mucins. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 719–728, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

NMR structure of rALF‐Pm3, an anti‐lipopolysaccharide factor from shrimp: Model of the possible lipid A‐binding site

The anti‐lipopolysaccharide factor ALF‐Pm3 is a 98‐residue protein identified in hemocytes from the black tiger shrimp Penaeus monodon. It was expressed in Pichia pastoris from the constitutive glyceraldehyde‐3‐phosphate dehydrogenase promoter as a folded and ¹⁵N uniformly labeled rALF‐Pm3 protein. Its 3D structure was established by NMR and consists of three α‐helices packed against a four‐stranded β‐sheet. The C³⁴? C⁵⁵ disulfide bond was shown to be essential for the structure stability. By using surface plasmon resonance, we demonstrated that rALF‐Pm3 binds to LPS, lipid A and to OM®‐174, a soluble analogue of lipid A. Biophysical studies of rALF‐Pm3/LPS and rALF‐Pm3/OM®‐174 complexes indicated rather high molecular sized aggregates, which prevented us to experimentally determine by NMR the binding mode of these lipids to rALF‐Pm3. However, on the basis of striking structural similarities to the FhuA/LPS complex, we designed an original model of the possible lipid A‐binding site of ALF‐Pm3. Such a binding site, located on the ALF‐Pm3 β‐sheet and involving seven charged residues, is well conserved in ALF‐L from Limulus polyphemus and in ALF‐T from Tachypleus tridentatus. In addition, our model is in agreement with experiments showing that β‐hairpin synthetic peptides corresponding to ALF‐L β‐sheet bind to LPS. Delineating lipid A‐binding site of ALFs will help go further in the de novo design of new antibacterial or LPS‐neutralizing drugs. © 2008 Wiley Periodicals, Inc. Biopolymers 91: 207–220, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Oligonucleotide N3′→P5′ Phosphoramidates and Thio‐Phoshoramidates as Potential Therapeutic Agents

Nucleic acids analogues, i.e., oligonucleotide N3′→P5′ phosphoramidates and N3′→P5′ thio‐phosphoramidates, containing 3′‐amino‐3′‐deoxy nucleosides with various 2′‐substituents were synthesized and extensively studied. These compounds resist nuclease hydrolysis and form stable duplexes with complementary native phosphodiester DNA and, particularly, RNA strands. An increase in duplexes' melting temperature, ΔT_m, relative to their phosphodiester counterparts, reaches 2.2–4.0° per modified nucleoside. 2′‐OH‐ (RNA‐like), 2′‐O‐Me‐, and 2′‐ribo‐F‐nucleoside substitutions result in the highest degree of duplex stabilization. Moreover, under close to physiological salt and pH conditions, the 2′‐deoxy‐ and 2′‐fluoro‐phosphoramidate compounds form extremely stable triple‐stranded complexes with either single‐ or double‐stranded phosphodiester DNA oligonucleotides. Melting temperature, T_m, of these triplexes exceeds T_m values for the isosequential phosphodiester counterparts by up to 35°. 2′‐Deoxy‐N3′→P5′ phosphoramidates adopt RNA‐like C3′‐endo or N‐type nucleoside sugar‐ring conformations and hence can be used as stable RNA mimetics. Duplexes formed by 2′‐deoxy phosphoramidates with complementary RNA strands are not substrates for RNase H‐mediated cleavage in vitro. Oligonucleotide phosphoramidates and especially thio‐phosphoramidates conjugated with lipid groups are cell‐permeable and demonstrate high biological target specific activity in vitro. In vivo, these compounds show good bioavailability and efficient biodistribution to all major organs, while exerting acceptable toxicity at therapeutically relevant doses. Short oligonucleotide N3′→P5′ thio‐phosphoramidate conjugated to 5′‐palmitoyl group, designated as GRN163L (Imetelstat), was recently introduced as a potent human telomerase inhibitor. GRN163L is not an antisense agent; it is a direct competitive inhibitor of human telomerase, which directly binds to the active site of the enzyme and thus inhibits its activity. This compound is currently in multiple Phase‐I and Phase‐I/II clinical trials as potential broad‐spectrum anticancer agent.     

2‐Hydroxynaphthalene‐1‐carbaldehyde‐ and 2‐(Aminomethyl)pyridine‐Based Schiff Base CuII Complexes for DNA Binding and Cleavage

Three mononuclear Cu^II complexes, [CuCl(naph‐pa)] ( 1 ), [Cu(bipy)(naph‐pa)]Cl ( 2 ), and [Cu(naph‐pa)(phen)]Cl ( 3 ) ((naph‐pa)=Schiff base derived from the condensation of 2‐hydroxynaphthalene‐1‐carbaldehyde and 2‐picolylamine (=2‐(aminomethyl)pyridine), bipy=2,2′‐bypiridine, and phen=1,10‐phenanthroline) were synthesized and characterized. Complex 1 exhibits square‐planar geometry, and 2 and 3 exhibit square pyramidal geometry, where Schiff base and bipy/phen act as NNO and as NN donor ligands, respectively. CT (Calf thymus)‐DNA‐binding studies revealed that the complexes bind through intercalative mode and show good binding propensity (intrinsic binding constant K_b: 0.98×10⁵, 2.22×10⁵, and 2.67×10⁵ M ^?1 for 1 – 3 , resp.). The oxidative and hydrolytic DNA‐cleavage activity of these complexes has been studied by gel electrophoresis: all the complexes displayed chemical nuclease activity in the presence and absence of H₂O₂. From the kinetic experiments, hydrolytic DNA cleavage rate constants were determined as 2.48, 3.32, and 4.10 h^?1 for 1 – 3 , respectively. It amounts to (0.68–1.14)×10⁸‐fold rate enhancement compared to non‐catalyzed DNA cleavage, which is impressive. The complexes display binding and cleavage propensity to DNA in the order of 3 > 2 > 1 .