Covalent modification of G-actin by pyridoxal 5'-phosphate: polymerization properties and interaction with DNase I and myosin subfragment 1.

Pyridoxal 5'-phosphate (PLP), a lysine-specific reagent, has been used to modify G-actin. At pH 7.5, PLP reacted with 1.7-2 lysines on G-actin. Limited proteolytic digestion experiments indicated that, in agreement with previous works, essentially lysine-61 was modified in a 1:1 fashion by PLP, other lysines being much less reactive. A PLP-derivatized affinity label of ATP binding sites, AMPPLP, reacted with two additional lysines that do not appear to be located in the ATP site on G-actin. PLP-G-actin did not polymerize spontaneously up to 30 microM; however, it retained other essential native properties of G-actin. PLP-actin bound to the barbed ends of actin filaments with an equilibrium dissociation constant of 4 microM and prevented dilution-induced depolymerization like a capping protein. PLP-actin copolymerized with unmodified actin. The stability of F-actin copolymers decreased with the fraction of PLP-actin incorporated, consistent with a model within which the actin-PLP-actin interactions in the copolymer are 50-fold weaker, and PLP-actin-PLP-actin interactions are 200-fold weaker than regular actin-actin interactions. PLP-actin bound DNase I with an equilibrium association constant of 2 nM-1, i.e., 10-fold lower than that of unmodified actin. PLP modification did not affect the binding of G-actin to myosin subfragment 1. However, polymerization of PLP-actin by myosin subfragment 1 was not observed in low ionic strength buffers, whereas PLP-F-actin-S1 filaments, in which the stoichiometry PLP-actin:S1 is 1:1, were formed with an apparent critical concentration of 4.5 microM in the presence of 0.1 M KCl.     

Myosin subfragment-1 interacts with two G-actin molecules in the absence of ATP

The interaction between G-actin and myosin subfragment-1 (S1) has been monitored by pyrenyl-actin fluorescence and light scattering. In low ionic strength buffer and in the absence of ATP the polymerization of G-actin induced by myosin subfragment-1 is preceded by the formation of binary GS and ternary G2S complexes in which S1 interacts tightly in rapid equilibrium (K greater than 10(7) M-1) with one and two G-actin molecules, respectively. Pyrenyl fluorescence of G-actin is enhanced 4-fold in GS and 3-fold in G2S. At concentrations of G-actin and S1 in the micromolar range and above, G2S is the predominant species at G-actin/S1 ratios equal to or greater than 1. The isomer of myosin subfragment-1 carrying the A1 light chain, S1(A1), forms a tighter ternary complex than the isomer S1(A2). Actin-bound ATP is not hydrolyzed upon formation of GS and G2S. In the presence of one molar equivalent or more of myosin subfragment-1/mol of G-actin, in low ionic strength buffer containing no nucleotides, G-actin polymerizes faster in the presence of S1(A1) than in the presence of S1(A2). The interaction of S1 with G-actin is inhibited by the binding of ATP or ADP to S1, ATP having a higher affinity for S1 than ADP. The possible structural similarity of the G2S complex to the F-acto-S1 complex in the rigor state and the potential significance of a ternary (actin)2-myosin interaction for actomyosin-based motility are discussed.     

Formation of actin dimers as studied by small angle neutron scattering

Small angle neutron scattering has been used to study the dimensions of G-actin and the formation of low molecular weight actin oligomers under conditions where rapid polymerization does not take place. In the presence of 200 microM Ca2+, actin in solution consists of a single component with a radius of gyration (Rg) of 19.9 +/- 0.4 A, consistent with the known molecular dimensions of the G-actin molecule. In the presence of 50 microM Mg2+, however, formation of an actin species with a larger Rg occurs over a 4-h period. Multicomponent fits were tried and the data were best fit assuming two components, the monomer and a species with an Rg of 29 +/- 1 A. This latter value is consistent with the dimensions expected for certain actin dimers. The apparent dissociation constant for dimer formation is approximately 150 microM with forward and reverse rate constants of 6.0 X 10(-7) microM-1 s-1 and 8.8 X 10(-5) s-1, respectively. Kinetic fluorescence experiments show that the dimer formed in the presence of low levels of Mg2+ is a nonproductive complex which does not participate in the polymerization process. However, the addition of cytochalasin D to actin in the presence of 50 microM Mg2+ rapidly induces the formation of dimers, presumably related to cytochalasin's ability to nucleate actin polymerization.     

Role of actin DNase-I-binding loop in myosin subfragment 1-induced polymerization of G-actin: implications for the mechanism of polymerization

Proteolytic cleavage of actin between Gly(42) and Val(43) within its DNase-I-binding loop (D-loop) abolishes the ability of Ca-G-actin to spontaneously polymerize in the presence of KCl. Here we show that such modified actin is assembled into filaments, albeit at a lower rate than unmodified actin, by myosin subfragment 1 (S1) carrying the A1 essential light chain but not by S1(A2). S1 titration of pyrene-G-actin showed a diminished affinity of cleaved actin for S1, but this could be compensated for by using S1 in excess. The most significant effect of the cleavage, revealed by measuring the fluorescence of pyrene-actin and light-scattering intensities as a function of actin concentration at saturating concentrations of S1, is strong inhibition of association of G-actin-S1 complexes into oligomers. Measurements of the fluorescence of dansyl cadaverine attached to Gln(41) indicate substantial inhibition of the initial association of G-actin-S1 into longitudinal dimers. The data provide experimental evidence for the critical role of D-loop conformation in both longitudinal and lateral, cross-strand actin-actin contact formation in the nucleation reaction. Electron microscopic analysis of the changes in filament-length distribution during polymerization of actin by S1(A1) and S1(A2) suggests that the mechanism of S1-induced polymerization is not substantially different from the nucleation-elongation scheme of spontaneous actin polymerization.     

Structural effects of cofilin on longitudinal contacts in F-actin

Structural effects of yeast cofilin on skeletal muscle and yeast actin were examined in solution. Cofilin binding to native actin was non-cooperative and saturated at a 1:1 molar ratio, with K(d)相似文献   

Plasticity of proton pathways in haem-copper oxygen reductases

Ca(2+) of 0.3-1.0 microM induces both the exposure of tryptic cleavage sites within the gelsolin molecule inaccessible in the Ca-free conformation, and binding of one actin monomer to the N-terminal half of gelsolin. On the other hand, gelsolin-induced enhancement of pyrene actin fluorescence was observed only above 50 microM Ca(2+), and a ternary actin/gelsolin complex preformed in 200 microM Ca(2+) was stable only above 30 microM Ca(2+). These results provide direct evidence for Ca-induced transitions from closed to open conformation of the gelsolin molecule in the range of 3 x 10(-7) to 10(-6) M Ca(2+). They also suggest that Ca(2+)>10(-5) M is required to stabilize actin-actin contacts in the 2:1 actin/gelsolin complex.     

Structural implications of the chemical modification of Cys(10) on actin

Cys(10) is located in subdomain 1 of actin, which has an important role in the interaction of actin with myosin- and actin-binding proteins. Cys(10) was modified with fluorescence probes N-(iodoacetyl)N'-(5-sulfo-1-naphthyl)ethylene diamine (IAEDANS), 7-diethylamino-3-(4'-maleimidylphenyl)-4-methylcoumarin (CPM), or monobromo bimane (MBB) by the method of, J. Biol. Chem. 266:5508-5513). The specificity of Cys(10) modification was verified by showing that the 33-kDa subtilisin fragment of actin (residues 48-375), which contains all of the actin thiols but Cys(10), is not fluorescent. Cys(10) modification exposed a new site on actin to subtilisin cleavage. Edman degradation revealed this site to be between Ala(19) and Gly(20). The modification slightly increased the rate of epsilonATP-ATP exchange and decreased the rates of G-actin ATPase and polymerization. The activation of S1 ATPase by Cys(10)-modified F-actin showed small probe-dependent changes in the values of V(max) and K(M). The sliding speed of actin filaments in the in vitro motility assay remained unchanged upon modification of Cys(10). These results indicate that although the labeling of Cys(10) perturbs the structure of subdomain 1, the modified actin remains fully functional. The binding of S1 to actin filaments decreases the accessibility of Cys(10) probes to acrylamide and nitromethane quenchers. Because Cys(10) does not participate directly in either actin polymerization or S1 binding, our results indicate that actin-actin and actin-myosin interactions induce dynamic, allosteric changes in actin structure.     

From the first to the second domain of gelsolin: a common path on the surface of actin?

We present the 2.6 A resolution crystal structure of a complex formed between G-actin and gelsolin fragment Met25-Gln160 (G1+). The structure differs from those of other gelsolin domain 1 (G1) complexes in that an additional six amino acid residues from the crucial linker region into gelsolin domain 2 (G2) are visible and are attached securely to the surface of actin. The linker segment extends away from G1 up the face of actin in a direction that infers G2 will bind along the same long-pitch helical strand as the actin bound to G1. This is consistent with a mechanism whereby G2 attaches gelsolin to the side of a filament and then directs G1 toward a position where it would disrupt actin-actin contacts. Alignment of the sequence of the structurally important residues within the G1-G2 linker with those of WH2 (WASp homology domain 2) domain protein family members (e.g. WASp (Wiscott-Aldridge syndrome protein) and thymosin beta4) suggests that the opposing activities of filament assembly and disassembly may exploit a common patch on the surface of actin.     

Ca2+-dependent binding of severin to actin: a one-to-one complex is formed

Severin is a protein from Dictyostelium that severs actin filaments in a Ca2+-dependent manner and remains bound to the filament fragments (Brown, S. S., K. Yamamoto, and J. A. Spudich , 1982, J. Cell Biol., 93:205-210; Yamamoto, K., J. D. Pardee , J. Reidler , L. Stryer , and J. A. Spudich , 1982, J. Cell Biol. 95:711-719). Further characterization of the interaction of severin with actin suggests that it remains bound to the preferred assembly end of the fragmented actin filaments. Addition of severin in molar excess to actin causes total disassembly of the filaments and the formation of a high-affinity complex containing one severin and one actin. This severin -actin complex does not sever actin filaments. The binding of severin to actin, measured directly by fluorescence energy transfer, requires micromolar Ca2+, as does the severing and depolymerizing activity reported previously. Once bound to actin in the presence of greater than 1 microM Ca2+, severin is not released from the actin when the Ca2+ is lowered to less than 0.1 microM by addition of EGTA. Tropomyosin, DNase I, phalloidin, and cytochalasin B have no effect on the ability of severin to bind to or sever actin filaments. Subfragment 1 of myosin, however, significantly inhibits severin activity. Severin binds not only to actin filaments, but also directly to G-actin, as well as to other conformational species of actin.     

Interactions of myosin subfragment 1 isozymes with G-actin

The polymerization of G-actin by myosin subfragment 1 (S-1) isozymes, S-1(A1) and S-1(A2), and their proteolytically cleaved forms was studied by light-scattering, fluorescence, and analytical ultracentrifugation techniques. As reported previously, S-1(A1) polymerized G-actin rapidly while S-1(A2) could hardly promote the assembly reaction (Chaussepied & Kasprzak, 1989a; Chen and Reisler, 1990). This difference between the isozymes of S-1 was traced to the very poor, if any, ability of G-actin-S-1(A2) complexes to nucleate the assembly of actin filaments. The formation of G-actin-S-1(A2) complexes was verified in sedimentation velocity experiments and by fluorescence measurements using pyrene-labeled actin. The G-actin-S-1(A2) complexes supported the growth of actin filaments and accelerated the polymerization of actin in solutions seeded with MgCl2-, KCl-, and S-1(A1)-generated nuclei. The growth rates of actin-S-1(A2) filaments were markedly slower than those for actin-S-1(A1) filaments. Proteolytic cleavage of S-1 isozymes at the 50/20-kDa junction of the heavy chain greatly decreased their binding to G-actin and thus inhibited the polymerization of actin by S-1(A1). These results are discussed in the context of G-actin-S-1 interactions.     

pH-induced changes in G-actin conformation and metal affinity

Metal-induced conformational changes in actin at 20 degrees C have been investigated as a function of pH using actin labeled at Cys-374 with N-(iodoacetyl)-N'-(5-sulfo-1-naphthyl)ethylenediamine. At pH 8, the addition of a high Ca2+ concentration (2 mM) to G-actin gives an instantaneous fluorescence increase while the addition of a high Mg2+ concentration gives both an instantaneous and a slow fluorescence increase. The instantaneous increase is interpreted as divalent cation binding to low-affinity, relatively nonspecific sites, while the slow response is attributed to Mg2+ binding to specific sites of moderate affinity [Zimmerle, C.T., Patane, K., & Frieden, C. (1987) Biochemistry 26, 6545-6552]. The magnitudes of both the instantaneous and slow fluorescence increases associated with Mg2+ addition to G-actin are shown here to decrease as the pH is lowered while the fluorescence of labeled G-actin in the presence of low or moderate Ca2+ concentrations (less than 200 microM) increases. The pH-dependent data suggest that protonation of a single class of residues with an approximate pK of 6.8 alters the immediate environment of the label differently depending upon the cation bound at the moderate-affinity site. The pH-dependent changes in the magnitude of the slow fluorescence response upon Mg2+ addition to Ca2+-actin are not associated with changes in the Mg2+ affinity at the moderate-affinity site but result from protonation altering the fluorescence response to Mg2+ binding. Protonation of this same class of residues is proposed to induce an actin conformation similar to that induced by cation binding at the low-affinity sites.(ABSTRACT TRUNCATED AT 250 WORDS)     

The accessibility of etheno-nucleotides to collisional quenchers and the nucleotide cleft in G- and F-actin.

Recent publication of the atomic structure of G-actin (Kabsch, W., Mannherz, H. G., Suck, D., Pai, E. F., & Holmes, K. C., 1990, Nature 347, 37-44) raises questions about how the conformation of actin changes upon its polymerization. In this work, the effects of various quenchers of etheno-nucleotides bound to G- and F-actin were examined in order to assess polymerization-related changes in the nucleotide phosphate site. The Mg(2+)-induced polymerization of actin quenched the fluorescence of the etheno-nucleotides by approximately 20% simultaneously with the increase in light scattering by actin. A conformational change at the nucleotide binding site was also indicated by greater accessibility of F-actin than G-actin to positively, negatively, and neutrally charged collisional quenchers. The difference in accessibility between G- and F-actin was greatest for I-, indicating that the environment of the etheno group is more positively charged in the polymerized form of actin. Based on calculations of the change in electric potential of the environment of the etheno group, specific polymerization-related movements of charged residues in the atomic structure of G-actin are suggested. The binding of S-1 to epsilon-ATP-G-actin increased the accessibility of the etheno group to I- even over that in Mg(2+)-polymerized actin. The quenching of the etheno group by nitromethane was, however, unaffected by the binding of S-1 to actin. Thus, the binding of S-1 induces conformational changes in the cleft region of actin that are different from those caused by Mg2+ polymerization of actin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Conformational state of thin myofilament proteins in normal and chronically failing heart

Circular dichroism (CD) spectra of myocardial G-actin significantly differ from those of F-actin, and the spectra of G- and F-actins differ from those of myocardial tropomyosin, native tropomyosin and alpha-actinin. In heart failure in man and experimental animals, characterized by a significantly decreased ability of the contractile protein system to generate force, considerable changes in the tertiary structure of Straub G-actin are observed. During polymerization a monomer of this actin is included in F-actin as a promoter without corresponding conformational changes of a part of G-actin globule; G-actin from the failing myocardium loses its conformational mobility. According to CD data the secondary protein structure is not altered. CD spectra analysis with regard to the regions of aromatic amino acid residue localization in active sites of actin suggests that the sites of actin-myosin and actin-actin interactions do not assume the conformation necessary for normal functioning of thin filaments.     

The kinetics of cytochalasin D binding to monomeric actin

It has been shown previously, using G-actin labeled with N-iodoacetyl-N'-(5-sulfo-1-naphthyl)ethylene-diamine, that Mg2+ induces a conformational change in monomeric G-actin as a consequence of binding to a tight divalent cation binding site (Frieden, C. (1982) J. Biol. Chem. 257, 2882-2886). Using the same fluorescent probe, we show that, subsequent to the Mg2+-induced conformational change, cytochalasin D induces a fluorescence decrease. The data are consistent with a mechanism which proposes that, after Mg2+ binding, cytochalasin D binds and induces a second conformational change which results in overall tight binding of the cytochalasin. The initial binding of cytochalasin D to monomeric actin labeled with the fluorescent probe was found to be 200 microM, and the forward and reverse rate constants for the subsequent conformational change were 350 s-1 and 8 s-1, respectively, with an overall dissociation constant to the Mg2+-induced form of 4.6 microM. The conformational change does not occur in monomeric actin in the presence of Ca2+ rather than Mg2+, but Ca2+ competes with Mg2+ for the tight binding site on the G-actin molecule. Direct binding studies show that actin which has not been labeled with the fluorophore binds cytochalasin D more tightly. The conformational change induced by Mg2+ and cytochalasin D precedes the formation of an actin dimer.     

Interaction of the small heat shock protein with molecular mass 25 kDa (hsp25) with actin.

The interaction of heat shock protein with molecular mass 25 kDa (HSP25) and its point mutants S77D + S81D (2D mutant) and S15D + S77D + S81D (3D mutant) with intact and thermally denatured actin was analyzed by means of fluorescence spectroscopy and ultracentrifugation. Wild type HSP25 did not affect the polymerization of intact actin. The HSP25 3D mutant decreased the initial rate without affecting the maximal extent of intact actin polymerization. G-actin heated at 40-45 degrees C was partially denatured, but retained its ability to polymerize. The wild type HSP25 did not affect polymerization of this partially denatured actin. The 3D mutant of HSP25 increased the initial rate of polymerization of partially denatured actin. Heating at more than 55 degrees C induced complete denaturation of G-actin. Completely denatured G-actin cannot polymerize, but it aggregates at increased ionic strength. HSP25 and especially its 2D and 3D mutants effectively prevent salt-induced aggregation of completely denatured actin. It is concluded that the interaction of HSP25 with actin depends on the state of both actin and HSP25. HSP25 predominantly acts as a chaperone and preferentially interacts with thermally unfolded actin, preventing the formation of insoluble aggregates.     

Detection and characterization of actin monomers, oligomers, and filaments in solution by measurement of fluorescence photobleaching recovery

Fluorescence photobleaching recovery (FPR) was measured to determine the diffusion coefficient of fluorescein-labeled G-actin in low-salt buffer. The result obtained, 7.15 +/- 0.35 X 10(-7) cm2/s, is in good agreement with that computed from the molecular weight, partial specific volume, and sedimentation coefficient, but is higher than previously obtained values. It is demonstrated from theory that at low ionic strength, the electrostatic contribution to the intrinsic viscosity leads to an overestimate of the hydrodynamic eccentricity of G-actin. Data from FPR, sedimentation, and fluorescence polarization experiments all indicate that the true low-salt form of the actin monomer has an axial ratio less than or equal to 3.0. The G-F transformation of actin was also observed by measurement of FPR during the assembly phase, in the steady state, and in the presence of ligands such as cytochalasin and aldolase. Each FPR record in general yields three data: relative proportion of rapidly and slowly diffusing actin, diffusion coefficient for the high-mobility fraction, and a mean diffusion coefficient for the low-mobility fraction. A relation between the mean low-mobility diffusion coefficient and the number-average filament length is derived and applied to the analysis of FPR data. Under typical conditions, the average filament length was much greater than 10 micron in the steady state. Cytochalasin D was found to decrease filament length and total amount of filament proportionally; total filament number was not greatly affected. In all polymerizations of G-actin, the high-mobility material observed in situ was found to be essentially monomeric actin. Relatively stable oligomers of actin were separated by fractionating G-AF-actin by gel filtration in 50 microM MgCl2 at 4 degrees C. On the basis of the diffusion coefficient, we conclude that monomer and dimer constitute the major particle types present under these conditions. Sedimentation of labeled actin polymerized in 1.0 mM MgCl2 yielded a graded supernatant that contained actin oligomers significantly larger than the monomer.     

Cofilin and DNase I affect the conformation of the small domain of actin

Cofilin binding induces an allosteric conformational change in subdomain 2 of actin, reducing the distance between probes attached to Gln-41 (subdomain 2) and Cys-374 (subdomain 1) from 34.4 to 31.4 A (pH 6.8) as demonstrated by fluorescence energy transfer spectroscopy. This effect was slightly less pronounced at pH 8.0. In contrast, binding of DNase I increased this distance (35.5 A), a change that was not pH-sensitive. Although DNase I-induced changes in the distance along the small domain of actin were modest, a significantly larger change (38.2 A) was observed when the ternary complex of cofilin-actin-DNase I was formed. Saturation binding of cofilin prevents pyrene fluorescence enhancement normally associated with actin polymerization. Changes in the emission and excitation spectra of pyrene-F actin in the presence of cofilin indicate that subdomain 1 (near Cys-374) assumes a G-like conformation. Thus, the enhancement of pyrene fluorescence does not correspond to the extent of actin polymerization in the presence of cofilin. The structural changes in G and F actin induced by these actin-binding proteins may be important for understanding the mechanism regulating the G-actin pool in cells.     

ADP-ribosylation of actins by arginine-specific ADP-ribosyltransferase purified from chicken heterophils.

We reported the purification and characterization of an arginine-specific ADP-ribosyltransferase and acceptor protein p33 in granules of chicken peripheral polymorphonuclear leukocytes (heterophils) [Mishima, K., Terashima, M., Obara, S., Yamada, K., Imai, K. & Shimoyama, M. (1991) J. Biochem. (Tokyo) 110, 388-394]. In the present study, we obtained evidence that chicken non-muscle beta/gamma-actin, skeletal muscle alpha-actin and smooth-muscle gamma-actin were ADP ribosylated by the heterophil ADP-ribosyltransferase. The stoichiometry of ADP-ribose incorporation into these actins was 1.2 mol, 1.0 mol and 2.0 mol ADP-ribose/mol of beta/gamma-actin, alpha-actin and gamma-actin, respectively. The optimal pH for the ADP ribosylation was at pH 8.5, with the respective actin. Km values for NAD were calculated to be 30 microM with beta/gamma-actin, 35 microM with alpha-actin and 20 microM with gamma-actin. The Km values for the actin isoforms were 15 microM for beta/gamma-actin, 2.5 microM for alpha-actin and 10 microM for gamma-actin. ADP ribosylation of actin inhibited its capacity to polymerize, as determined by the increase in fluorescence intensity with N-(1-pyrenyl)iodoacetamide-labelled actin. Filamentous actin (F-actin) polymerized with the respective actin isoform was also ADP ribosylated, although the extent of the modification of F-actin was lower than that of globular actin (G-actin). In situ ADP ribosylation of beta/gamma-actin was evidenced with chicken peripheral heterophils permeabilized with saponin. Thus, the endogenous ADP ribosylation of actin in the heterophils may be involved in the cellular processes such as phagocytosis, secretion and migration.     

Isolation and characterization of covalently cross-linked actin dimer

Covalently cross-linked actin dimer was isolated from rabbit skeletal muscle F-actin reacted with phenylenebismaleimide (Knight, P., and Offer, G. (1978) Biochem. J. 175, 1023-1032). The UV spectrum of the purified cross-linked actin dimer, in a nonpolymerizing buffer, was very similar to that of native F-actin and not to the spectrum of G-actin. Cross-linked actin dimer polymerized to filaments that were indistinguishable in the electron microscope from F-actin made from native G-actin and that were similar to native F-actin in their ability to activate the Mg2+-ATPase of myosin subfragment-1. The critical concentrations of polymerization of cross-linked actin dimer in 0.5 mM and 2.0 mM MgCl2, 2 to 4 microM, and 1 to 2 microM, respectively, were similar to the values for native G-actin. Cross-linked actin dimer contained 2 mol of bound nucleotide/mol of dimer. One bound nucleotide exchanged with ATP in solution with a t 1/2 of 55 min and with ADP with a t 1/2 of 5 h. The second bound nucleotide exchanged much more slowly. The more rapidly exchangeable site contained 10 to 15% bound ADP.Pi and 85 to 90% bound ATP while the second site contained much less, if any, bound ADP.Pi. Cross-linked actin dimer had an ATPase activity in 0.5 mM MgCl2 that was 7 times greater than the ATPase activity of native G-actin and that was also stimulated by cytochalasin D. These data are discussed in relation to the possible role of ATP in actin polymerization and function with the speculation that the cross-linked actin dimer may serve simultaneously as a useful model for each of the two different ends of native F-actin.     

The second ADF/cofilin actin-binding site exists in F-actin, the cofilin-G-actin complex, but not in G-actin.

ADF/cofilins are actin binding proteins that bind actin close to both the N- and C-termini (site 1), and we have found a second cofilin binding site (site 2) centered around helix 112-125 [Renoult, C., Ternent, D., Maciver, S.K., Fattoum, A., Astier, C., Benyamin, Y. & Roustan, C. (1999) J. Biol. Chem. 274, 28893-28899]. We proposed a model in which ADF/cofilin intercalated between subdomains 1 and 2 of two longitudinally associated actin monomers within the actin:cofilin cofilament, explaining the change in twist that ADF/cofilins induce in the filament [McGough, A. Pope, B., Chiu, W. & Weeds, A. (1998) J. Cell Biol. 138, 771-781]. Here, we have determined the fuller extent of the cofilin footprint on site 1 of actin. Site 1 is primarily the G-actin binding site. Experiments with both peptide mimetics and fluorescently labeled cofilin suggest that site 2 only becomes available for cofilin binding within the filament, possibly due to motion between subdomains 1 and 2 within an actin monomer. We have detected motion between subdomains 1 and 2 of G-actin by FRET induced by cofilin, to reveal the second cofilin-binding site. This motion may also explain how cofilins inhibit the nucleotide exchange of actin, and why the actin:cofilin complex is polymerizable without dissociation.