Effect of variations in the structure of a polyleucine-based alpha-helical transmembrane peptide on its interaction with phosphatidylethanolamine Bilayers

High-sensitivity differential scanning calorimetry and Fourier transform infrared spectroscopy were used to study the interaction of a cationic alpha-helical transmembrane peptide, acetyl-Lys2-Leu24-Lys2-amide (L24), and members of the homologous series of zwitterionic n-saturated diacyl phosphatidylethanolamines (PEs). Analogs of L24, in which the lysine residues were replaced by 2,3-diaminopropionic acid (acetyl-DAP2-Leu24-DAP2-amide (L24DAP)) or in which a leucine residue at each end of the polyleucine sequence was replaced by a tryptophan (Ac-K2-W-L22-W-K2-amide (WL22W)), were also studied to investigate the roles of lysine side-chain snorkeling and aromatic side-chain interactions with the interfacial region of phospholipid bilayers. The gel/liquid-crystalline phase transition temperature of the PE bilayers is altered by these peptides in a hydrophobic mismatch-independent manner, in contrast to the hydrophobic mismatch-dependent manner observed previously with zwitterionic phosphatidylcholine (PC) and anionic phosphatidylglycerol (PG) bilayers. Moreover, all three peptides reduce the phase transition temperature to a greater extent in PE bilayers than in PC and PG bilayers, indicating a greater disruption of PE gel-phase bilayer organization. Moreover, the lysine-anchored L24 reduces the phase transition temperature, enthalpy, and the cooperativity of PE bilayers to a much greater extent than DAP-anchored L24DAP, whereas replacement of the terminal leucines by tryptophan residues (Ac-K2-W-L22-W-K2-amide) only slightly attenuates the effects of this peptide on the chain-melting phase transition of the host PE bilayers. All three peptides form very stable alpha-helices in PE bilayers, but small conformational changes occur in response to mismatch between peptide hydrophobic length and gel-state lipid bilayer hydrophobic thickness. These results suggest that the lysine snorkeling plays a significant role in the peptide-PE interactions and that cation-pi-interactions between lysine and tryptophan residues may modulate these interactions. Altogether, these results suggest that the lipid-peptide interactions are affected not only by the hydrophobic mismatch between these peptides and the host lipid bilayer but also by the electrostatic and hydrogen-bonding interactions between the positively charged lysine residues at the termini of these peptides and the polar headgroups of PE bilayers.     

Interaction of a peptide model of a hydrophobic transmembrane alpha-helical segment of a membrane protein with phosphatidylcholine bilayers: differential scanning calorimetric and FTIR spectroscopic studies.

High-sensitivity differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were used to study the interaction of a synthetic model hydrophobic peptide, Lys2-Gly-Leu24-Lys2-Ala-amide, and members of the homologous series of n-saturated diacylphosphatidylcholines. In the low range of peptide mole fractions, the DSC thermograms exhibited by the lipid/peptide mixtures are resolvable into two components. One of these components is fairly narrow, highly cooperative, and exhibits properties which are similar to but not identical with those of the pure lipid. In addition, the fractional contribution of this component to the total enthalpy change, the peak transition temperature, and cooperativity decrease with an increase in peptide concentration, more or less independently of acyl chain length. The other component is very broad and predominates in the high range of peptide concentration. These two components have been assigned to the chain-melting phase transitions of populations of bulk lipid and peptide-associated lipid, respectively. Moreover, when the mean hydrophobic thickness of the PC bilayer is less than the peptide hydrophobic length, the peptide-associated lipid melts at higher temperatures than does the bulk lipid and vice versa. In addition, the chain-melting enthalpy of the broad endotherm does not decrease to zero even at high peptide concentrations, suggesting that this peptide reduces but do not abolish the cooperative gel/liquid-crystalline phase transition of the lipids with which it is in contact. Our DSC results indicate that the width of the phase transition observed at high peptide concentration is inversely but discontinuously related to hydrocarbon chain length and that gel phase immiscibility occurs when the hydrophobic thickness of the bilayer greatly exceeds the hydrophobic length of the peptide. The FTIR spectroscopic data indicate that the peptide forms a very stable alpha-helix under all of our experimental conditions but that small distortions of its alpha-helical conformation are induced in response to any mismatch between peptide hydrophobic length and bilayer hydrophobic thickness. These results also indicate that the peptide alters the conformational disposition of the acyl chains in contact with it and that the resultant conformational changes in the lipid hydrocarbon chains tend to minimize the extent of mismatch of peptide hydrophobic length and bilayer hydrophobic thickness.     

Effect of variations in the structure of a polyleucine-based alpha-helical transmembrane peptide on its interaction with phosphatidylglycerol bilayers

High-sensitivity differential scanning calorimetry and Fourier transform infrared spectroscopy were used to study the interaction of a cationic alpha-helical transmembrane peptide, acetyl-Lys(2)-Leu(24)-Lys(2)-amide (L(24)), and members of the homologous series of anionic n-saturated diacyl phosphatidylglycerols (PGs). Analogues of L(24), in which the lysine residues were replaced by 2,3-diaminopropionic acid (L(24)DAP), or in which a leucine residue at each end of the polyleucine sequence was replaced by a tryptophan (WL(22)W), were also studied to investigate the roles of lysine side-chain snorkeling and aromatic side-chain interactions with the interfacial region of phospholipid bilayers. The gel/liquid-crystalline phase transition temperature of the host PG bilayers is altered by these peptides in a hydrophobic mismatch-dependent manner, as previously found with zwitterionic phosphatidylcholine (PC) bilayers. However, all three peptides reduce the phase transition temperature and enthalpy to a greater extent in anionic PG bilayers than in zwitterionic PC bilayers, with WL(22)W having the largest effect. All three peptides form very stable alpha-helices in PG bilayers, but small conformational changes are induced in response to a mismatch between peptide hydrophobic length and gel-state lipid bilayer hydrophobic thickness. Moreover, electrostatic and hydrogen-bonding interactions occur between the terminal lysine residues of L(24) and L(24)DAP and the polar headgroups of PG bilayers. However, such interactions were not observed in PG/WL(22)W bilayers, suggesting that the cation-pi interactions between the tryptophan and lysine residues predominate. These results indicate that the lipid-peptide interactions are affected not only by the hydrophobic mismatch between these peptides and the host lipid bilayer, but also by the tryptophan-modulated electrostatic and hydrogen-bonding interactions between the positively charged lysine residues at the termini of these peptides and the negatively charged polar headgroups of the PG bilayers.     

Control of the transmembrane orientation and interhelical interactions within membranes by hydrophobic helix length

We examined the effect of the length of the hydrophobic core of Lys-flanked poly(Leu) peptides on their behavior when inserted into model membranes. Peptide structure and membrane location were assessed by the fluorescence emission lambdamax of a Trp residue in the center of the peptide sequence, the quenching of Trp fluorescence by nitroxide-labeled lipids (parallax analysis), and circular dichroism. Peptides in which the hydrophobic core varied in length from 11 to 23 residues were found to be largely alpha-helical when inserted into the bilayer. In dioleoylphosphatidylcholine (diC18:1PC) bilayers, a peptide with a 19-residue hydrophobic core exhibited highly blue-shifted fluorescence, an indication of Trp location in a nonpolar environment, and quenching localized the Trp to the bilayer center, an indication of transmembrane structure. A peptide with an 11-residue hydrophobic core exhibited emission that was red-shifted, suggesting a more polar Trp environment, and quenching showed the Trp was significantly displaced from the bilayer center, indicating that this peptide formed a nontransmembranous structure. A peptide with a 23-residue hydrophobic core gave somewhat red-shifted fluorescence, but quenching demonstrated the Trp was still close to the bilayer center, consistent with a transmembrane structure. Analogous behavior was observed when the behavior of individual peptides was examined in model membranes with various bilayer widths. Other experiments demonstrated that in diC18:1PC bilayers the dilution of the membrane concentration of the peptide with a 23-residue hydrophobic core resulted in a blue shift of fluorescence, suggesting the red-shifted fluorescence at higher peptide concentrations was due to helix oligomerization. The intermolecular self-quenching of rhodamine observed when the peptide was rhodamine-labeled, and the concentration dependence of self-quenching, supported this conclusion. These studies indicate that the mismatch between helix length and bilayer width can control membrane location, orientation, and helix-helix interactions, and thus may mismatch control both membrane protein folding and the interactions between membrane proteins.     

Interaction of a peptide model of a hydrophobic transmembrane alpha-helical segment of a membrane protein with phosphatidylethanolamine bilayers: differential scanning calorimetric and Fourier transform infrared spectroscopic studies.

High-sensitivity differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were used to study the interaction of a synthetic alpha-helical hydrophobic transmembrane peptide, Acetyl-Lys2-Gly-Leu24-Lys2-Ala-Amide, and members of a homologous series of n-saturated diacylphosphatidylethanolamines (PEs). In the lower range of peptide mol fractions, the DSC endotherms exhibited by the lipid/peptide mixtures consist of two components. The temperature and cooperativity of the sharper, higher-temperature component are very similar to those of pure PE bilayers and are almost unaffected by variations in the peptide/lipid ratio. However, the fractional contribution of this component to the total enthalpy change decreases with increases in peptide concentration, and this component completely disappears at higher peptide mol fractions. The other component, which is less cooperative and occurs at a lower temperature, predominates at higher peptide concentrations. These two components of the DSC endotherm can be attributed to the chain-melting phase transitions of peptide-nonassociated and peptide-associated PE molecules, respectively. Although the temperature at which the peptide-associated PE molecules melt is progressively decreased by increases in peptide concentration, the magnitude of this shift is independent of the length of the PE hydrocarbon chain. In addition, the width of the phase transition observed at higher peptide concentrations is also relatively insensitive to PE hydrocarbon chain length, except that peptide gel-phase immiscibility occurs in very short- or very long-chain PE bilayers. Moreover, the enthalpy of the chain-melting transition of the peptide-associated PE does not decrease to 0 even at high peptide concentrations, suggesting that this peptide does not abolish the cooperative gel/liquid-crystalline phase transition of the lipids with which it is in contact. The FTIR spectroscopic data indicate that the peptide remains in a predominantly alpha-helical conformation, but that the peptide alpha-helix is subject to small distortions coincident with the changes in hydrophobic thickness that accompany the chain-melting phase transition of the PE bilayer. These data also indicate that the peptide significantly disorders the hydrocarbon chains of adjacent PE molecules in both the gel and liquid-crystalline states relatively independently of lipid hydrocarbon chain length. The relative independence of many aspects of PE-peptide interactions on the hydrophobic thickness of the host bilayer observed in the present study is in marked contrast to the results of our previous study of peptide-phosphatidylcholine (PC) model membranes (Zhang et al. (1992) Biochemistry 31:11579-11588), where strong hydrocarbon chain length-dependent effects were observed.(ABSTRACT TRUNCATED AT 400 WORDS)     

Cumulative effects of amino acid substitutions and hydrophobic mismatch upon the transmembrane stability and conformation of hydrophobic alpha-helices

The effects of amino acid substitutions upon the behavior of poly(Leu)-rich alpha-helices inserted into model membrane vesicles were investigated. One or two consecutive Leu residues in the hydrophobic core of the helix were substituted with A, F, G, S, D, K, H, P, GG, SS, PG, PP, KK, or DD residues. A Trp placed at the center of the sequence allowed assessment of peptide behavior via fluorescence emission lambda(max) and dual quenching analysis of Trp depth [Caputo, G. A., and London, E. (2003) Biochemistry 42, 3265-3274]. In vesicles composed of dioleoylphosphatidylcholine (DOPC), all of the peptides with single substitutions adopted a transmembrane (TM) state. Experiments were also performed in thicker bilayers composed of dierucoylphosphatidylcholine (DEuPC). In DEuPC vesicles TM states were destabilized by mismatch between helix length and bilayer thickness. Nevertheless, in DEuPC vesicles TM states were still prevalent for peptides with single substitutions, although less so for peptides with P, K, H, or D substitutions. In contrast to single substitutions, certain consecutive double substitutions strongly interfered with formation of TM states. In both DOPC and DEuPC vesicles DD and KK substitutions abolished the normal TM state, but GG and SS substitutions had little effect. In even wider bilayers, a SS substitution reduced the formation of a TM state. A peptide with a PP substitution maintained the TM state in DOPC vesicles, but in DEuPC vesicles the level of formation of the TM state was significantly reduced. Upon disruption of normal TM insertion peptides moved close to the bilayer surface, with the exception of the KK-substituted peptide in DOPC vesicles, which formed a truncated TM segment. These studies begin to provide a detailed relationship between sequence and the stability of TM insertion and show that the influence of insertion-destabilizing residues upon hydrophobic helices can be strongly modulated by properties such as mismatch. For certain helix-forming hydrophobic sequences, sensitivity to lipid structure may be sufficient to induce large conformational changes in vivo.     

Interactions of phospholipids with the potassium channel KcsA

The potassium channel KcsA from Streptomyces lividans has been reconstituted into bilayers of phosphatidylcholines and fluorescence spectroscopy has been used to characterize the response of KcsA to changes in bilayer thickness. The Trp residues in KcsA form two bands, one on each side of the membrane. Trp fluorescence emission spectra and the proportion of the Trp fluorescence intensity quenchable by I(-) hardly vary in the lipid chain length range C10 to C24, suggesting efficient hydrophobic matching between KcsA and the lipid bilayer over this range. Measurements of fluorescence quenching for KcsA reconstituted into mixtures of brominated and nonbrominated phospholipids have been analyzed to give binding constants of lipids for KcsA, relative to that for dioleoylphosphatidylcholine (di(C18:1)PC). Relative lipid binding constants increase by only a factor of three with increasing chain length from C10 to C22 with a decrease from C22 to C24. Strongest binding to di(C22:1)PC corresponds to a state in which the side chains of the lipid-exposed Trp residues are likely to be located within the hydrocarbon core of the lipid bilayer. It is suggested that matching of KcsA to thinner bilayers than di(C24:1)PC is achieved by tilting of the transmembrane alpha-helices in KcsA. Measurements of fluorescence quenching of KcsA in bilayers of brominated phospholipids as a function of phospholipid chain length suggest that in the chain length range C14 to C18 the Trp residues move further away from the center of the lipid bilayer with increasing chain length, which can be partly explained by a decrease in helix tilt angle with increasing bilayer thickness. In the chain length range C18 to C24 it is suggested that the Trp residues become more buried within the hydrocarbon core of the bilayer.     

Effect of sequence hydrophobicity and bilayer width upon the minimum length required for the formation of transmembrane helices in membranes

The minimum hydrophobic length necessary to form a transmembrane (TM) helix in membranes was investigated using model membrane-inserted hydrophobic helices. The fluorescence of a Trp at the center of the sequence and its sensitivity to quenching were used to ascertain helix position within the membrane. Peptides with hydrophobic cores composed of poly(Leu) were compared to sequences containing a poly 1:1 Leu:Ala core (which have a hydrophobicity typical of natural TM helices). Studies varying bilayer width revealed that the poly(Leu) core peptides predominately formed a TM state when the bilayer width exceeded hydrophobic sequence length by (i.e. when negative mismatch was) up to ∼ 11-12 Å (e.g. the case of a 11-12 residue hydrophobic sequence in bilayers with a biologically relevant width, i.e. dioleoylphosphatidylcholine (DOPC) bilayers), while poly(LeuAla) core peptides formed predominantly TM state with negative mismatch of up to 9 Å (a 13 residue hydrophobic sequence in DOPC bilayers). This indicates that minimum length necessary to form a predominating amount of a TM state (minimum TM length) is only modestly hydrophobicity-dependent for the sequences studied here, and a formula that defines the minimum TM length as a function of hydrophobicity for moderately-to-highly hydrophobic sequences was derived. The minimum length able to form a stable TM helix for alternating LeuAla sequences, and that for sequences with a Leu block followed by an Ala block, was similar, suggesting that a hydrophobicity gradient along the sequence may not be an important factor in TM stability. TM stability was also similar for sequences flanked by different charged ionizable residues (Lys, His, Asp). However, ionizable flanking residues destabilized the TM configuration much more when charged than when uncharged. The ability of short hydrophobic sequences to form TM helices in membranes in the presence of substantial negative mismatch implies that lipid bilayers have a considerable ability to adjust to negative mismatch, and that short TM helices may be more common than generally believed. Factors that modulate the ability of bilayers to adjust to mismatch may strongly affect the configuration of short hydrophobic helices.     

Studies of the minimum hydrophobicity of alpha-helical peptides required to maintain a stable transmembrane association with phospholipid bilayer membranes

The effects of the hydrophobicity and the distribution of hydrophobic residues on the surfaces of some designed alpha-helical transmembrane peptides (acetyl-K2-L(m)-A(n)-K2-amide, where m + n = 24) on their solution behavior and interactions with phospholipids were examined. We find that although these peptides exhibit strong alpha-helix forming propensities in water, membrane-mimetic media, and lipid model membranes, the stability of the helices decreases as the Leu content decreases. Also, their binding to reversed phase high-performance liquid chromatography columns is largely determined by their hydrophobicity and generally decreases with decreases in the Leu/Ala ratio. However, the retention of these peptides by such columns is also affected by the distribution of hydrophobic residues on their helical surfaces, being further enhanced when peptide helical hydrophobic moments are increased by clustering hydrophobic residues on one side of the helix. This clustering of hydrophobic residues also increases peptide propensity for self-aggregation in aqueous media and enhances partitioning of the peptide into lipid bilayer membranes. We also find that the peptides LA3LA2 [acetyl-K2-(LAAALAA)3LAA-K2-amide] and particularly LA6 [acetyl-K2-(LAAAAAA)3LAA-K2-amide] associate less strongly with and perturb the thermotropic phase behavior of phosphatidylcholine bilayers much less than peptides with higher L/A ratios. These results are consistent with free energies calculated for the partitioning of these peptides between water and phospholipid bilayers, which suggest that LA3LA2 has an equal tendency to partition into water and into the hydrophobic core of phospholipid model membranes, whereas LA6 should strongly prefer the aqueous phase. We conclude that for alpha-helical peptides of this type, Leu/Ala ratios of greater than 7/17 are required for stable transmembrane associations with phospholipid bilayers.     

A differential scanning calorimetric and 31P NMR spectroscopic study of the effect of transmembrane alpha-helical peptides on the lamellar-reversed hexagonal phase transition of phosphatidylethanolamine model membranes

We have investigated the effects of the model alpha-helical transmembrane peptide Ac-K(2)L(24)K(2)-amide (L(24)) on the thermotropic phase behavior of aqueous dispersions of 1,2-dielaidoylphosphatidylethanolamine (DEPE) to understand better the interactions between lipid bilayers and the membrane-spanning segments of integral membrane proteins. We studied in particular the effect of L(24) and three derivatives thereof on the liquid-crystalline lamellar (L(alpha))-reversed hexagonal (H(II)) phase transition of DEPE model membranes by differential scanning calorimetry and (31)P nuclear magnetic resonance spectroscopy. We found that the incorporation of L(24) progressively decreases the temperature, enthalpy, and cooperativity of the L(alpha)-H(II) phase transition, as well as induces the formation of an inverted cubic phase, indicating that this transmembrane peptide promotes the formation of inverted nonlamellar phases, despite the fact that the hydrophobic length of this peptide exceeds the hydrophobic thickness of the host lipid bilayer. These characteristic effects are not altered by truncation of the side chains of the terminal lysine residues or by replacing each of the leucine residues at the end of the polyleucine core of L(24) with a tryptophan residue. Thus, the characteristic effects of these transmembrane peptides on DEPE thermotropic phase behavior are independent of their detailed chemical structure. Importantly, significantly shortening the polyleucine core of L(24) results in a smaller decrease in the L(alpha)-H(II) phase transition temperature of the DEPE matrix into which it is incorporated, and reducing the thickness of the host phosphatidylethanolamine bilayer results in a larger reduction in the L(alpha)-H(II) phase transition temperature. These results are not those predicted by hydrophobic mismatch considerations or reported in previous studies of other transmembrane alpha-helical peptides containing a core of an alternating sequence of leucine and alanine residues. We thus conclude that the hydrophobicity and conformational flexibility of transmembrane peptides can affect their propensity to induce the formation of inverted nonlamellar phases by mechanisms not primarily dependent on lipid-peptide hydrophobic mismatch.     

Morphological behavior of acidic and neutral liposomes induced by basic amphiphilic alpha-helical peptides with systematically varied hydrophobic-hydrophilic balance

Lipid-peptide interaction has been investigated using cationic amphiphilic alpha-helical peptides and systematically varying their hydrophobic-hydrophilic balance (HHB). The influence of the peptides on neutral and acidic liposomes was examined by 1) Trp fluorescence quenched by brominated phospholipid, 2) membrane-clearing ability, 3) size determination of liposomes by dynamic light scattering, 4) morphological observation by electron microscopy, and 5) ability to form planar lipid bilayers from channels. The peptides examined consist of hydrophobic Leu and hydrophilic Lys residues with ratios 13:5, 11:7, 9:9, 7:11, and 5:13 (abbreviated as Hels 13-5, 11-7, 9-9, 7-11, and 5-13, respectively; Kiyota, T., S. Lee, and G. Sugihara. 1996. Biochemistry. 35:13196-13204). The most hydrophobic peptide (Hel 13-5) induced a twisted ribbon-like fibril structure for egg PC liposomes. In a 3/1 (egg PC/egg PG) lipid mixture, Hel 13-5 addition caused fusion of the liposomes. Hel 13-5 formed ion channels in neutral lipid bilayer (egg PE/egg PC = 7/3) at low peptide concentrations, but not in an acidic bilayer (egg PE/brain PS = 7/3). The peptides with hydrophobicity less than Hel 13-5 (Hels 11-7 and Hel 9-9) were able to partially immerse their hydrophobic part of the amphiphilic helix in lipid bilayers and fragment liposome to small bicelles or micelles, and then the bicelles aggregated to form a larger assembly. Peptides Hel 11-7 and Hel 9-9 each formed strong ion channels. Peptides (Hel 7-11 and Hel 5-13) with a more hydrophilic HHB interacted with an acidic lipid bilayer by charge interaction, in which the former immerses the hydrophobic part in lipid bilayer, and the latter did not immerse, and formed large assemblies by aggregation of original liposomes. The present study clearly showed that hydrophobic-hydrophilic balance of a peptide is a crucial factor in understanding lipid-peptide interactions.     

Molecular dynamics simulations of model trans-membrane peptides in lipid bilayers: a systematic investigation of hydrophobic mismatch

Hydrophobic mismatch, which is the difference between the hydrophobic length of trans-membrane segments of a protein and the hydrophobic width of the surrounding lipid bilayer, is known to play a role in membrane protein function. We have performed molecular dynamics simulations of trans-membrane KALP peptides (sequence: GKK(LA)nLKKA) in phospholipid bilayers to investigate hydrophobic mismatch alleviation mechanisms. By varying systematically the length of the peptide (KALP15, KALP19, KALP23, KALP27, and KALP31) and the lipid hydrophobic length (DLPC, DMPC, and DPPC), a wide range of mismatch conditions were studied. Simulations of durations of 50-200 ns show that under positive mismatch, the system alleviates the mismatch predominantly by tilting the peptide and to a smaller extent by increased lipid ordering in the immediate vicinity of the peptide. Under negative mismatch, alleviation takes place by a combination of local bilayer bending and the snorkeling of the lysine residues of the peptide. Simulations performed at a higher peptide/lipid molar ratio (1:25) reveal slower dynamics of both the peptide and lipid relative to those at a lower peptide/lipid ratio (1:128). The lysine residues have favorable interactions with specific oxygen atoms of the phospholipid headgroups, indicating the preferred localization of these residues at the lipid/water interface.     

Influence of flanking residues on tilt and rotation angles of transmembrane peptides in lipid bilayers. A solid-state 2H NMR study

To gain insight into the parameters that determine the arrangement of proteins in membranes, (2)H NMR experiments were performed to analyze tilt and rotation angles of membrane-spanning alpha-helical model peptides upon incorporation in diacylphosphatidylcholine bilayers with varying thickness. The peptides consisted of the sequence acetyl-GW(2)(LA)(8)LW(2)A-NH(2) (WALP23) and analogues thereof, in which the interfacial Trp residues were replaced by Lys (KALP23) and/or the hydrophobic sequence was replaced by Leu (WLP23 and KLP23). The peptides were synthesized with a single deuterium-labeled alanine at four different positions along the hydrophobic segment. For all peptides a small but systematic increase in tilt angle was observed upon decreasing the bilayer thickness. However, significantly larger tilt angles were obtained for the Lys-flanked KALP23 than for the Trp-flanked WALP23, suggesting that interfacial anchoring interactions of Trp may inhibit tilting. Increasing the hydrophobicity resulted in an increase in tilt angle for the Trp-flanked analogue only. For all peptides the maximum tilt angle obtained was remarkably small (less than 12 degrees ), suggesting that further tilting is inhibited, most likely due to unfavorable packing of lipids around a tilted helix. The results furthermore showed that the direction of tilt is determined almost exclusively by the flanking residues: Trp- and Lys-flanked peptides were found to have very different rotation angles, which were influenced significantly neither by hydrophobicity of the peptides nor by the extent of hydrophobic mismatch. Finally, very small changes in the side chain angles of the deuterated alanine probes were observed in Trp-flanked peptides, suggesting that these peptides may decrease their hydrophobic length to help them to adapt to thin membranes.     

A theoretical model for the association of amphiphilic transmembrane peptides in lipid bilayers

A theoretical model is proposed for the association of trans-bilayer peptides in lipid bilayers. The model is based on a lattice model for the pure lipid bilayer, which accounts accurately for the most important conformational states of the lipids and their mutual interactions and statistics. Within the lattice formulation the bilayer is formed by two independent monolayers, each represented by a triangular lattice, on which sites the lipid chains are arrayed. The peptides are represented by regular objects, with no internal flexibility, and with a projected area on the bilayer plane corresponding to a hexagon with seven lattice sites. In addition, it is assumed that each peptide surface at the interface with the lipid chains is partially hydrophilic, and therefore interacts with the surrounding lipid matrix via selective anisotropic forces. The peptides would therefore assemble in order to shield their hydrophilic residues from the hydrophobic surroundings. The model describes the self-association of peptides in lipid bilayers via lateral and rotational diffusion, anisotropic lipid-peptide interactions, and peptide-peptide interactions involving the peptide hydrophilic regions. The intent of this model study is to analyse the conditions under which the association of trans-bilayer and partially hydrophilic peptides (or their dispersion in the lipid matrix) is lipid-mediated, and to what extent it is induced by direct interactions between the hydrophilic regions of the peptides. The model properties are calculated by a Monte Carlo computer simulation technique within the canonical ensemble. The results from the model study indicate that direct interactions between the hydrophilic regions of the peptides are necessary to induce peptide association in the lipid bilayer in the fluid phase. Furthermore, peptides within each aggregate are oriented in such a way as to shield their hydrophilic regions from the hydrophobic environment. The average number of peptides present in the aggregates formed depends on the degree of mismatch between the peptide hydrophobic length and the lipid bilayer hydrophobic thickness: The lower the degree of mismatch is the higher this number is. Received: 30 December 1996 / Accepted: 9 May 1997     

The effect of peptide/lipid hydrophobic mismatch on the phase behavior of model membranes mimicking the lipid composition in Escherichia coli membranes

The effect of hydrophobic peptides on the lipid phase behavior of an aqueous dispersion of dioleoylphosphatidylethanolamine and dioleoylphosphatidylglycerol (7:3 molar ratio) was studied by (31)P NMR spectroscopy. The peptides (WALPn peptides, where n is the total number of amino acid residues) are designed as models for transmembrane parts of integral membrane proteins and consist of a hydrophobic sequence of alternating leucines and alanines, of variable length, that is flanked on both ends by tryptophans. The pure lipid dispersion was shown to undergo a lamellar-to-isotropic phase transition at approximately 60 degrees C. Small-angle x-ray scattering showed that at a lower water content a cubic phase belonging to the space group Pn3m is formed, suggesting also that the isotropic phase in the lipid dispersion represents a cubic liquid crystalline phase. It was found that the WALP peptides very efficiently promote formation of nonlamellar phases in this lipid system. At a peptide-to-lipid (P/L) molar ratio of 1:1000, the shortest peptide used, WALP16, lowered the lamellar-to-isotropic phase transition by approximately 15 degrees C. This effect was less for longer peptides. For all of the WALP peptides used, an increase in peptide concentration led to a further lowering of the phase transition temperature. At the highest P/L ratio (1:25) studied, WALP16 induced a reversed hexagonal liquid crystalline (H(II)) phase, while the longer peptides still promoted the formation of an isotropic phase. Peptides with a hydrophobic length larger than the bilayer thickness were found to be unable to inhibit formation of the isotropic phase. The results are discussed in terms of mismatch between the hydrophobic length of the peptide and the hydrophobic thickness of the lipid bilayer and its consequences for lipid-protein interactions in membranes.     

Effects of aromatic residues at the ends of transmembrane alpha-helices on helix interactions with lipid bilayers

We have studied the effects of aromatic residues at the ends of peptides of the type Ac-KKGL(n)()WL(m)()KKA-amide on their interactions with lipid bilayers as a function of lipid fatty acyl chain length, physical phase, and charge. Peptide Ac-KKGFL(6)WL(8)FKKA-amide (F(2)L(14)) incorporated into bilayers of phosphatidylcholines containing monounsaturated fatty acyl chains of lengths C14-C24 at a peptide:lipid molar ratio of 1:100 in contrast to Ac-KKGL(7)WL(9)KKA-amide (L(16)) which did not incorporate at all into dierucoylphosphatidylcholine [di(C24:1)PC]; Ac-KKGYL(6)WL(8)YKKA-amide (Y(2)L(14)) incorporated partly into di(C24:1)PC. Lipid-binding constants relative to that for dioleoylphosphatidylcholine (C18:1)PC were obtained using a fluorescence quenching method. For Y(2)L(14) and F(2)L(14), relative lipid-binding constants increased with increasing fatty acyl chain length from C14 to C24; strongest binding did not occur at the point where the hydrophobic length of the peptide equalled the hydrophobic thickness of the bilayer. For Ac-KKGYL(9)WL(11)YKKA-amide (Y(2)L(20)), increasing chain length from C18 to C24 had little effect on relative binding constants. Anionic phospholipids bound more strongly than zwitterionic phospholipids to Y(2)L(14) and Y(2)L(20) but effects of charge were relatively small. In two phase (gel and liquid crystalline) mixtures, all the peptides partitioned more strongly into liquid crystalline than gel phase; effects were independent of the structure of the peptide or of the lipid (dipalmitoylphosphatidylcholine or bovine brain sphingomyelin). Addition of cholesterol had little effect on incorporation of the peptides into lipid bilayers. It is concluded that the presence of aromatic residues at the ends of transmembrane alpha-helices effectively buffers them against changes in bilayer thickness caused either by an increase in the chain length of the phospholipid or by the presence of cholesterol.     

The role of tryptophan residues in an integral membrane protein: diacylglycerol kinase

Tryptophan residues are thought to play special roles in integral membrane proteins, anchoring transmembrane alpha-helices into the lipid bilayer. We have studied the effect of mutating the five Trp residues in the diacylglycerol kinase (DGK) of Escherichia coli to Leu residues. The fluorescence emission maxima for DGK and a variety of Trp mutants in bilayers of dioleoylphosphatidylcholine [di(C18:1)PC] are all centered at ca. 327 nm, suggesting that all five Trp residues are located close to the glycerol backbone region of the bilayer. This is also consistent with fluorescence quenching experiments, measuring the separation between the Trp residues and the bromine atoms in a bilayer of dibromostearoylphosphatidylcholine. Mutation of Trp residues in DGK was found to have significant effects on activity for DGK reconstituted into bilayers of di(C18:1)PC containing 30 mol % 1,2-dihexanoylglycerol (DHG). Of the mutants containing a single Trp residue, only that containing Trp-112 was found to give active protein. The presence of both Trp-25 and Trp-112 gave higher activity than Trp-112 alone. Trp-25 and Trp-112 are the most important Trp residues in DGK as far as activity is concerned. Effects of mutations on K(m) for DHG were generally greater than effects on v(max). The activity of wild-type and mutant DHGs reconstituted into bilayers of phosphatidylcholines was sensitive to the chain length of the phospholipid, with highest activities for chain lengths of C18 or C20 and lower activities in phosphatidylcholines with shorter or longer chains. Compared to wild-type DGK, the Trp mutants were less affected by long-chain phosphatidylcholines but more affected by short-chain phospholipids. In mutants lacking Trp-25, low activities in short-chain phospholipids followed from a decrease in v(max) compared to wild type, combined with an increase in K(m) value for DHG, as observed in the wild type. It is suggested that Trp-25 plays a role in maintaining the alignment of ATP and DHG at the active site. Fluorescence emission spectra for the Trp mutants do not change significantly with changing fatty acyl chain length from C14 to C24, showing efficient hydrophobic matching between DGK and the surrounding lipid bilayer. It is suggested that hydrophobic matching is achieved by tilting of the transmembrane alpha-helix or rotation of residues at the ends of the helices about the Calpha-Cbeta bond linking the residue to the helix backbone. As well as any structural effects, the presence of Trp residues in DGK has a clear effect on thermal stability.     

Lipid-protein interactions studied by introduction of a tryptophan residue: the mechanosensitive channel MscL

Trp fluorescence spectroscopy is a powerful tool to study the structures of membrane proteins and their interactions with the surrounding lipid bilayer. Many membrane proteins contain more than one Trp residue, making analysis of the fluorescence data more complex. The mechanosensitive channels MscL's of Mycobacterium tuberculosis (TbMscL) and Escherichia coli (EcMscL) contain no Trp residues. We have therefore introduced single Trp residues into the transmembrane regions of TbMscL and EcMscL to give the Trp-containing mutants F80W-TbMscL and F93W-EcMscL, respectively, which we show are highly suitable for measurements of lipid binding constants. In vivo cell viability assays in E. coli show that introduction of the Trp residues does not block function of the channels. The Trp-containing mutants have been reconstituted into lipid bilayers by mixing in cholate followed by dilution to re-form membranes. Cross-linking experiments suggest that the proteins retain their pentameric structures in phosphatidylcholines with chain lengths between C14 and C24, phosphatidylserines, and phosphatidic acid. Quenching of Trp fluorescence by brominated phospholipids suggests that the Trp residue in F80W-TbMscL is more exposed to the lipid bilayer than the Trp residue in F93W-EcMscL. Binding constants for phosphatidylcholines change with changing fatty acyl chain length, the strongest interaction for both TbMscL and EcMscL being observed with a chain of length C16, corresponding to a bilayer of hydrophobic thickness ca. 24 A, compared to a hydrophobic thickness for TbMscL of about 26 A estimated from the crystal structure. Lipid binding constants change by only a factor of 1.5 in the chain length range from C12 to C24, much less than expected from theories of hydrophobic mismatch in which the protein is treated as a rigid body. It is concluded that MscL distorts to match changes in bilayer thickness. The binding constants for dioleoylphosphatidylethanolamine for both TbMscL and EcMscL relative to those for dioleoylphosphatidylcholine are close to 1. Quenching experiments suggest a single class of binding sites for phosphatidylserine, phosphatidylglycerol, and cardiolipin on TbMscL; binding constants are greater than those for phosphatidylcholine and decrease with increasing ionic strength, suggesting that charge interactions are important in binding these anionic phospholipids. Quenching experiments suggest two classes of lipid binding sites on TbMscL for phosphatidic acid, binding of phosphatidic acid being much less dependent on ionic strength than binding of phosphatidylserine.     

Peptide models of the helical hydrophobic transmembrane segments of membrane proteins: interactions of acetyl-K2-(LA)12-K2-amide with phosphatidylethanolamine bilayer membranes

High-sensitivity differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were used to study the interaction of a synthetic alpha-helical hydrophobic transmembrane peptide, acetyl-Lys(2)-(Leu-Ala)(12)-Lys(2)-amide [(LA)(12)], and members of a homologous series of n-saturated diacylphosphatidylethanolamines (PEs). In the lower range of peptide mole fractions, the DSC endotherms exhibited by the lipid/peptide mixtures consist of two components. The temperature and cooperativity of the sharper, higher temperature component are very similar to those of pure PE bilayers and are almost unaffected by variations in the protein/lipid ratio. However, the fractional contribution of this component to the total enthalpy changes decreases with increases in peptide concentration, and this component completely disappears at higher protein mole fractions. The other component, which is less cooperative and occurs at a lower temperature, predominates at higher protein concentrations. These two components of the DSC endotherm have been assigned to the chain-melting phase transitions of peptide-nonassociated and peptide-associated PE molecules, respectively. Although the temperature at which the peptide-associated PE molecules melt is progressively decreased by increases in (LA)(12) concentration, the magnitude of this downward shift is progressively greater as the length of the PE hydrocarbon chain decreases. As well, mixtures of (LA)(12) with the longer chain PEs exhibit unusual biomodal enthalpy variations, suggesting peptide immiscibility in thicker gel state bilayers. Moreover, the enthalpy of the chain-melting transition of the peptide-associated PE does not decrease to zero even at high peptide concentrations, indicating that (LA)(12) attenuates but does not abolish the cooperative gel/liquid-crystalline phase transition of the lipids with which it is in contact. Our FTIR spectroscopic data indicate that (LA)(12) remains in a predominantly alpha-helical conformation in liquid-crystalline PE bilayers of various hydrophobic thickness but that the helical conformation is altered in gel-state PE bilayers generally, probably due to peptide lateral aggregation. These data also suggest that (LA)(12) significantly disorders the hydrocarbon chains of adjacent PE molecules in both the gel and liquid-crystalline states, relatively independently of lipid hydrocarbon chain length. Many aspects of PE/(LA)(12) interactions exhibit a different dependence on the hydrophobic thickness of the host bilayer than was observed in our previous study of (LA)(12)-phosphatidylcholine (PC) model membranes [Zhang et al. (1995) Biochemistry 34, 2362-2371]. The differing effects of (LA)(12) incorporation on PE and PC bilayers is ascribed primarily to the much stronger lipid polar headgroup interactions characteristic of the former system. Finally, the considerable differences observed in the behavior of (LA)(12) and the related polyleucine-based peptide P(24) in both PC and PE bilayers indicate that the structure of the hydrophobic core of alpha-helical transmembrane peptides can affect their conformational plasticity and state of aggregation and thus the nature of their interactions with different phospholipid bilayers.     

Combined influence of cholesterol and synthetic amphiphillic peptides upon bilayer thickness in model membranes.

Deuterium (2H) NMR was used to study bilayer hydrophobic thickness and mechanical properties when cholesterol and/or synthetic amphiphillic polypeptides were added to deuterated POPC lipid bilayer membranes in the liquid-crystalline (fluid) phase. Smoothed acyl chain orientational order profiles were used to calculate bilayer hydrophobic thickness. Addition of 30 mol% cholesterol to POPC at 25 degrees C increased the bilayer thickness from 2.58 to 2.99 nm. The peptides were chosen to span the bilayers with more or less mismatch between the hydrophobic peptide length and membrane hydrophobic thickness. The average thickness of the pure lipid bilayers was significantly perturbed upon addition of peptide only in cases of large mismatch, being increased (decreased) when the peptide hydrophobic length was greater (less) than that of the pure bilayer, consistent with the "mattress" model of protein lipid interactions (Mouritsen, O.G., and M. Bloom. 1984. Biophys. J. 46:141-153). The experimental results were also used to examine the combined influence of the polypeptides and cholesterol on the orientational order profile and thickness expansivity of the membranes. A detailed model for the spatial distribution of POPC and cholesterol molecules in the bilayers was proposed to reconcile the general features of these measurements with micromechanical measurements of area expansivity in closely related systems. Experiments to test the model were proposed.