Cis- and trans-titanium complexes with doubly silyl-bridged dicyclopentadienyl ligands: molecular structure of [(TiCl)2(μ-O){(SiMe2)2(η-C5H3)2}]2(μ-O)2

The reaction of TiCl₄ with Li₂[(SiMe₂)₂(η⁵-C₅H₃)₂] in toluene at room temperature afforded a mixture of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] in a molar ratio of 1/2 after recrystallization. The complex trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] was hydrolyzed immediately by the addition of water to THF solutions to give trans-[(TiCl₂)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] as a solid insoluble in all organic solvents, whereas hydrolysis of cis-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] under different conditions led to the dinuclear μ-oxo complex cis-[(TiCl₂)₂)(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] and two oxo complexes of the same stoichiometry [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ as crystalline solids. Alkylation of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] with MgCIMe led respectively to the partially alkylated cis-[(TiMe₂Cl)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] and the totally alkylated trans-[(TiMe₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] compounds. The crystal and molecular structure of the tetranuclear oxo complex [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ was determined by X-ray diffraction.     

Silyl reagents (Me3Si-X) efficiently transfer X to Ir(H)2F(PBuP2Ph)2

Me₃Si-X reagents react to completion at 25°C in a short time to convert Ir(H)₂FL₂ (L=P^tBu₂Ph) to Ir(H)₂XL₂. This involves formation of Ir-O, Ir-N, Ir-I, Ir-S and Ir-C(sp) bonds. Products include some η²-X ligands such as carboxylate and acetamide, NHC(O)CH₃. The acetamide is shown to be η² in the solid state and in solution, but readily rearranges, by a transition state with Ir-O bond cleavage, to effect site exchange of the two inequivalent hydrides. The same synthetic approach succeeds for the more crowded metallated species and these reactions arc shown to fail when F is replaced by Cl in the iridium reagent. Unsaturation at Ir is suggested to be central to the mechanism of these F/X transposition reactions.     

Thermal and photochemical substitution reactions of CpRe(PPh3)2H2 and CpRe(PPh3)H4. Catalytic insertion of ethylene into the C-H bond of benzene

The thermal and photochemical reactions of CpRe(PPh₃)₂H₄ and CpRe(PPh₃)H₄ (Cp = η⁵-C₅H₅) with PMe₃, P(p-tolyl)₃, PMe₂Ph, DMPE, DPPE, DPPM, CO, 2,6-xylylisocyanide and ethylene have been examined. While CpRe(PPh₃)₂H₂ is thermally inert, it will undergo photochemical substitution of one or two PPh₃ ligands. With ethylene, substitution is followed by insertion of the olefin into the C-H bond of benzene, giving ethylbenzene. CpRe(PPh₃)H₄ undergoes thermal loss of PPh₃, which leads to substituted products of the type CpRe(L) H₄. Photochemically, reductive elimination of dihydrogen occurs preferentially. The complex trans-CpRe(DMPE)H₂ was structurally characterized, crystallizing in the monoclinic space group P2₁/n (No. 14) with a = 6.249(6), b = 16.671(8), c = 13.867(7) Å, β = 92.11(6)°, V = 1443.7(2.9) Å and Z = 4. The complex trans-CpRe(PMe₂Ph)₂H₂ was structurally characterized, crystallizing in the monoclinic space group P2₁/n (No. 14) with a = 7.467(3), b = 23.874(14), c = 11.798(6) Å, β = 100.16(4)°, V = 2070.2(3.4) ų and Z = 4.     

Electrophilic abstractions on Os(H)2X(NO)L2: selective access to new unsaturated cationic Os(II) hydrides

Nitrosylation of Os(H)₃ClL₂ (L = P¹Pr₃) affords the known Os(H)₂Cl(NO)L₂ (2). Soft electrophiles (Ag⁻, Na⁻) react with complex 2 by chloride abstraction to ultimately yield truly 16-electron dihydride Os(H)₂(NO)(P¹Pr₃)₂⁻ (4a), characterized by variable-temperature NMR. Complex 4a reversibly binds H₂, forming Os(H)₂(H₂)(NO)(P¹Pr₃)⁻ with an unusually high barrier for intramolecular hydride exchange. Under kinetic conditions, protonation of 2 with strong acids follows the selectivity for chloride abstraction. Thermodynamically, protonation at the hydride is preferred, quantitatively producing cationic OsHCl(NO)L₂⁺, isolated and characterized by X-ray diffraction as the BAr₄^F− salt (7) (Ar^F=3,5−(CF₃)₂C₆H₃). Structures of isoelectronic OsHCl(NO)(PH₃)₂ and OsHCl(CO)(PH₃)₂ were optimized with ab initio DFT (Becke3LYP) methods and compared to show the greater unsaturation of the metal in the cationic species. Both complexes, 4a and 7, are highly electrophilic and reversibly coordinate dichloromethane in solution. The observed reactivity patterns of the synthesized unsaturated hydrides are rationalized in terms of the determining influence of the ‘push-pull’ π-stabilization of the metal center.     

Serendipitous syntheses of Rh(H)2Cl(PRPh2)3 complexes, and their crystal structures, where R = Me, Cy (cyclohexyl)

Reactions of RhCl(cod)(THP) (cod = 1,5-cyclooctadiene; THP = P(CH₂OH)₃) with PMePh₂ or PCyPh₂ (Cy = cyclohexyl) in acetone/MeOH solution under H₂ surprisingly form the complexes cis, mer-Rh(H)₂Cl(PRPh₂)₃ (R = Me or Cy); both complexes are characterized by crystallography (the first structures in which the hydride ligands of such dihydrido-chloro-trisphosphine complexes have been located), and by detailed ¹H and ³¹P NMR spectroscopy. The key role of the THP in the observed chemistry is discussed.     

Intermolecular Re---H·H---X hydrogen bonding (X = N, C) involving ReH5(PPh3)3

Ab initio (B3LYP) calculations show that PD·H---ReH₄(PH₃)₃ (PD = Proton donor) interactions follow the order PD = pyrrole > NH₃ > HCCH > C₂H₄ > CH₃---H 0 and decrease with the pK_a of the PD. For equivalent pK_a's, NH interacts more strongly than CH. However, intermolecular hydrogen-bonding of the M---H·H---C type is too weak to be detected experimentally in FTIR or UV-vis studies between ReH₅(PPh₃)₃ and PhCCH, C₆F₅H or PhCHCl₂.     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Synthesis and characterisation of a trinuclear uranyl complex: Crystal structure of (CN3H6)5[(UO2)3O(OH)2(CH3COO)(C2O4)3]

The reaction of uranyl oxalate trihydrate with guanidinium acetate at room temperature in water yields known uranyl complex with composition (CN₃H₆)₂[UO₂(C₂O₄)₂(H₂O)]·H₂O as a first phase and a novel complex (CN₃H₆)₅[(UO₂)₃O(OH)₂(CH₃COO)(C₂O₄)₃] as a second. The second phase was investigated by means of IR spectroscopy and X-ray diffraction. The trinuclear discrete complex contains two symmetrically independent uranyl ions with a pentagonal bipyramid structure and has a nonplanar geometry. The distortion of its equatorial plane is caused by substitution of a monodentate bridge hydroxide anion by a bidentate bridge acetate-anion. The acidic ligands found in the complex are usually in competition for a place in coordination sphere of an uranyl ion, thus peculiarities of the complex formation are discussed in terms of ‘crystallochemical analysis’.     

Main group derivatives of a cyclometallated iron carbonyl anion. Crystal structures of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(SnPh3) and two isomers of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(I)

The iron hydrido complex HFe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄} (1), was rapidly deprotonated by DBU or [BzMe₃N][OH] in THF to afford the new carbonyl iron anion [Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}]⁻ ([2]⁻), containing an ortho-metallated triphenyl phosphite ligand. Complex [2]⁻ reacted with triorganostannyl and plumbyl salts and with halogens to give the octahedral Fe^II compounds Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}(X) (X=SnPh₃, 3; SnMe₃, 4; PbPh₃, 5; PbMe₃, 6; Cl, 7; Br, 8; I, 9). The Group 14 complexes 3-6 were obtained in one isomeric form in which the P^III-donor atoms are mutually cis, the carbonyl ligands are cis and the P(OPh)₃ and MR₃ (M=Sn, Pb; R=Ph, Me) groups are trans as determined by solution-state IR, ³¹P and ¹³C NMR spectroscopic data. This geometry was confirmed for 3 by a single crystal X-ray diffraction study. The halide complexes, however, were obtained as a mixture of isomers. The major isomer (7, X=Cl; 8a, X=Br; 9a, X=I) has cis P atoms, trans CO groups and the halide located trans to the phosphorus atom of the ortho-metallated phosphite ligand. The structure of 9a was confirmed by an X-ray diffraction study. Two other isomers, designated 8b (X=Br) and 9b (X=I), with cis P atoms and cis CO groups were isolated from the reactions of [2]⁻ with Br₂ and I₂, respectively. The structure of the latter was established by X-ray crystallography and is related to 9a by exchange of the P(OPh)₃ ligand and a carbonyl group such that the metal-bound C atom of the five-membered metallacycle is trans to CO. The stereo-geometry of 8b could not be unambiguously assigned from the spectroscopic data; however, two of the seven possible geometric isomers were suggested as plausible structures.     

CO substitution and diphosphine ligand chelation in the reaction between 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and Re(2(CO)8(μ-H)(μ-η,η-C CPh)

The reaction between the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and the dirhenium compound Re₂(CO)₈(μ-H)(μ-η¹,η²-C CPh) in CH₂Cl₂ at room temperature proceeds by CO loss to give the dirhenium complex Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) (1). This new complex was characterized in solution by IR and NMR (¹H and ³¹P) spectroscopy and in the solid state by X-ray diffraction analysis. Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) crystallizes in the triclinic space group

Full-size image

γ = 69.240(6)°, V = 2024.9(3) ų, Z = 2, d_calc = 1.862 g cm⁻³ R = 0.0221, R_w = 0.243 for 4066 observed reflections. The bpcd ligand in 1 adopts a chelating mode with a linear phenylacetylide ligand being located on the adjacent rhenium center cis to the bpcd ligand. This complex represents the first structurally characterized example of a hydrido-bridged dirhenium complex possessing both a linear acetylide ligand and a chelating diphosphine ligand.     

Dynamic properties of the fluxional Rh2H(μ-PPh2)2(PPh3)3 complex

The rhodium dimer [Rh₂H(PPh₂)₂(PPh₃)₃]⁻ was prepared from RhCl(PPh₃)₃ and K₄Sn₉ in the presence of 2,2,2-cryptand in ethylenediamine/toluene solvent mixtures. The [K(2,2,2-crypt)]⁺ salt was isolated and characterized via NMR and X-ray diffraction studies. The solid state structure reveals a binuclear, diphenylphosphido-bridged, 32 electron Rh(I)-Rh(I) complex with edge-shared tetrahedral and square planar Rh centers with overall C_s point symmetry. 1-D and 2-D ¹H, ³¹P, and ³¹P{¹H} NMR experiments were used to characterize the complex.     

Catalytic and electrochemical properties of new manganese(III) compounds of 2-(2′-hydroxyphenyl)-oxazoline (Hphox or HClphox). Molecular structures of [Mn(Clphox)2(MeOH)2](ClO4) and [Mn(phox)2(MeOH)2][Mn(phox)2(ClO4)2](H2O)2

New manganese(III) complexes of Hphox (2-(2′-hydroxyphenyl)-oxazoline) and HClphox (2-(5′-chloro-2′-hydroxyphenyl)-oxazoline) have been synthesised. The X-ray structures of [Mn(phox)₂(MeOH)₂][Mn(phox)₂(ClO₄)₂](H₂O)₂ and [Mn(Clphox)₂(MeOH)₂](ClO₄) show the manganese(III) ions to be octahedrally coordinated with methanol or perchlorate at the axial coordination sites. The cyclic voltammograms of the complexes, with the exception of [Mn(phox)₂(acac)] (Hacac=2,4-pentanedione), show an irreversible reduction wave of manganese(III) to manganese(II). After addition of an excess of 1-methylimidazole (1-Meim), the reduction process shifts towards lower potentials and becomes (quasi-) reversible, indicating that the presence of 1-Meim affects the catalytic efficiency of the complexes. The complexes catalyse the epoxidation of styrene by dihydrogen peroxide. The cumulative turnover numbers towards styrene oxide obtained after 15 min. vary from 16 for [Mn(Clphox)₂(MeOH)₂](ClO₄) to 26 for [Mn(phox)₂(acac)]. Ligand degradation appears to be the limiting factor for obtaining higher turnover numbers.     

The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Heats of reaction of HMo(CO)3(C5R5) (R = H, CH3) with diphenyldisulfide and of formation of the clusters [PhSMo(CO)x(C5H5)]2, X = 1,2. Thermodynamic study of molybdenum-sulfur bond strengths

The enthalpies of reaction of HMo(CO)₃C₅R₅ (R = H, CH₃) with diphenyldisulfide producing PhSMo(CO)₃C₅R₅ and PhSH have been measured in toluene and THF solution (R = H, ΔH= −8.5 ± 0.5 kcal mol⁻¹ (tol), −10.8 ± 0.7 kcal mol⁻¹ (THF); R = CH₃, ΔH = −11.3±0.3 kcal mol⁻¹ (tol), −13.2±0.7 kcal mol⁻¹ (THF)). These data are used to estimate the Mo---SPh bond strength to be on the order of 38–41 kcal mol⁻¹ for these complexes. The increased exothermicity of oxidative addition of disulfide in THF versus toluene is attributed to hydrogen bonding between thiophenol produced in the reaction and THF. This was confirmed by measurement of the heat of solution of thiophenol in toluene and THF. Differential scanning calorimetry as well as high temperature calorimetry have been performed on the dimerization and subsequent decarbonylation reactions of PhSMo(CO)₃Cp yielding [PhSMo(CO)₂Cp]₂ and [PhSMo(CO)Cp]₂. The enthalpies of reaction of PhSMo(CO)₃Cp and [PhSMo(CO)₂Cp]₂ with PPh₃, PPh₂Me and P(OMe)₃ have also been measured. The disproportionation reaction: 2[PhSMo(CO)₂Cp]₂ → 2PhSMo(CO)₃Cp + [PhSMP(CO)Cp]₂ is reported and its enthalpy has also been measured. These data allow determination of the enthalpy of formation of the metal-sulfur clusters [PhSMo(CO)_nC₅H₅]₂, N = 1,2.     

Synthesis, and crystal and molecular structures of the triflato and trifluoroacetato complexes of zinc, Zn(O3SCF3)2(DME)2 and [Zn(O2CCF3)2(DME)]n

Anhydrous Zn(O₃SCF₃)₂ and Zn(O₂CCX₃)₂, X=F, Cl, Br were obtained in substantially quantitative yields from ZnO (or ZnEt₂ in the case of the bromide derivative) and a mixture of the corresponding acid and anhydride in heptane as medium. The reactions are rapid and moderately exothermic. Recrystallization of the triflate and trifluoroacetate complexes from dimethoxyethane (DME) produced single crystals of Zn(O₃SCF₃)₂(DME)₂ (1) and [Zn(O₂CCF₃)₂(DME)]_n (2) suitable for X-ray diffraction studies. In both compounds zinc is hexacoordinated with a pseudo-octahedral geometry. Compound 1 is constituted by mononuclear molecules with terminal monodentate O₃SCF₃ ligands in trans position. A polynuclear chain structure was found for 2 with zinc atoms joined alternatively by triple and single carboxylato bridges, and with bidentate terminal DME.     

Cyano-bridged cluster-metal coordination compound: synthesis and crystal structure of [Cu(NH3)3][Cu(NH3)4][Cu(NH3)5][W4Te4(CN)12]·5H2O

Dark-brown single crystals of the title compound 1 were obtained in high yield by layering a CuCl₂ solution in 25% aqueous ammonia on a glycerol solution of K₆[W₄Te₄(CN)₁₂]·5H₂O. The complex 1 was characterized by single crystal X-ray diffraction analysis and IR spectroscopy. The X-ray structure of 1 reveals a polymeric chain cyano-bridged cluster-metal coordination compound. The [W₄Te₄(CN)₁₂]⁶⁻ cluster anions are linked one to another by Cu²⁺ cations through coordination by nitrogen atoms of the CN groups.     

Ligand connected metal clusters. The molecular structures and solid state packing of {Ru3(CO)11}2(bis(diphenylphosphino)ethane) and {Ru3(CO)11}2(1,4-bis(diphenylphosphino)benzene)

The preparation and structural characterization of {Ru₃(CO)₁₁}₂(1,4-bis(diphenylphosphino)benzene), a modified synthesis of 1,4-bis(diphenylphosphino)benzene, and the structural characterization of {Ru₃(CO)₁₁}₂(bis(diphenylphosphino)ethane) are reported. In both compounds two metal cluster units are connected through ditertiary-phosphine ligands. Both molecules consist of centrosymmetric units in which the diphosphine ligands are largely covered by the triangular ruthenium clusters. No direct interaction between the two cluster units occurs within individual molecules. Molecular packing in the solid state is dominated by interactions between sets of carbon monoxide ligands in motifs that were previously identified in the solid state structure of the parent cluster, Ru₃(CO)₁₂.