Structural differences between the Streptococcus agalactiae housekeeping and pilus-specific sortases: SrtA and SrtC1

The assembly of pili on the cell wall of Gram-positive bacteria requires transpeptidase enzymes called sortases. In Streptococcus agalactiae, the PI-1 pilus island of strain 2603V/R encodes two pilus-specific sortases (SrtC1 and SrtC2) and three pilins (GBS80, GBS52 and GBS104). Although either pilus-specific sortase is sufficient for the polymerization of the major pilin, GBS80, incorporation of the minor pilins GBS52 and GBS104 into the pilus structure requires SrtC1 and SrtC2, respectively. The S. agalactiae housekeeping sortase, SrtA, whose gene is present at a different location and does not catalyze pilus polymerization, was shown to be involved in cell wall anchoring of pilus polymers. To understand the structural basis of sortases involved in such diverse functions, we determined the crystal structures of S. agalactiae SrtC1 and SrtA. Both enzymes are made of an eight-stranded beta-barrel core with variations in their active site architecture. SrtA exhibits a catalytic triad arrangement similar to that in Streptococcus pyogenes SrtA but different from that in Staphylococcus aureus SrtA. In contrast, the SrtC1 enzyme contains an N-terminal helical domain and a 'lid' in its putative active site, which is similar to that seen in Streptococcus pneumoniae pilus-specific sortases, although with subtle differences in positioning and composition. To understand the effect of such differences on substrate recognition, we have also determined the crystal structure of a SrtC1 mutant, in which the conserved DP(W/F/Y) motif was replaced with the sorting signal motif of GBS80, IPNTG. By comparing the structures of WT wild type SrtA and SrtC1 and the 'lid' mutant of SrtC1, we propose that structural elements within the active site and the lid may be important for defining the role of specific sortase in pili biogenesis.     

Engineering the substrate specificity of Staphylococcus aureus Sortase A. The beta6/beta7 loop from SrtB confers NPQTN recognition to SrtA

The Staphylococcus aureus transpeptidase Sortase A (SrtA) anchors virulence and colonization-associated surface proteins to the cell wall. SrtA selectively recognizes a C-terminal LPXTG motif, whereas the related transpeptidase Sortase B (SrtB) recognizes a C-terminal NPQTN motif. In both enzymes, cleavage occurs after the conserved threonine, followed by amide bond formation between threonine and the pentaglycine cross-bridge of cell wall peptidoglycan. Genetic and biochemical studies strongly suggest that SrtA and SrtB exhibit exquisite specificity for their recognition motifs. To better understand the origins of substrate specificity within these two isoforms, we used sequence and structural analysis to predict residues and domains likely to be involved in conferring substrate specificity. Mutational analyses and domain swapping experiments were conducted to test their function in substrate recognition and specificity. Marked changes in the specificity profile of SrtA were obtained by replacing the beta6/beta7 loop in SrtA with the corresponding domain from SrtB. The chimeric beta6/beta7 loop swap enzyme (SrtLS) conferred the ability to acylate NPQTN-containing substrates, with a k(cat)/K(m)(app) of 0.0062 +/- 0.003 m(-1) s(-1). This enzyme was unable to perform the transpeptidation stage of the reaction, suggesting that additional domains are required for transpeptidation to occur. The overall catalytic specificity profile (k(cat)/K(m)(app)(NPQTN)/k(cat)/K(m)(app)(LPETG)) of SrtLS was altered 700,000-fold from SrtA. These results indicate that the beta6/beta7 loop is an important site for substrate recognition in sortases.     

Structures of sortase B from Staphylococcus aureus and Bacillus anthracis reveal catalytic amino acid triad in the active site

Surface proteins attached by sortases to the cell wall envelope of bacterial pathogens play important roles during infection. Sorting and attachment of these proteins is directed by C-terminal signals. Sortase B of S. aureus recognizes a motif NPQTN, cleaves the polypeptide after the Thr residue, and attaches the protein to pentaglycine cross-bridges. Sortase B of B. anthracis is thought to recognize the NPKTG motif, and attaches surface proteins to m-diaminopimelic acid cross-bridges. We have determined crystal structure of sortase B from B. anthracis and S. aureus at 1.6 and 2.0 A resolutions, respectively. These structures show a beta-barrel fold with alpha-helical elements on its outside, a structure thus far exclusive to the sortase family. A putative active site located on the edge of the beta-barrel is comprised of a Cys-His-Asp catalytic triad and presumably faces the bacterial cell surface. A putative binding site for the sorting signal is located nearby.     

Protein sorting to the cell wall envelope of Gram-positive bacteria

The covalent anchoring of surface proteins to the cell wall envelope of Gram-positive bacteria occurs by a universal mechanism requiring sortases, extracellular transpeptidases that are positioned in the plasma membrane. Surface protein precursors are first initiated into the secretory pathway of Gram-positive bacteria via N-terminal signal peptides. C-terminal sorting signals of surface proteins, bearing an LPXTG motif or other recognition sequences, provide for sortase-mediated cleavage and acyl enzyme formation, a thioester linkage between the active site cysteine residue of sortase and the C-terminal carboxyl group of cleaved surface proteins. During cell wall anchoring, sortase acyl enzymes are resolved by the nucleophilic attack of peptidoglycan substrates, resulting in amide bond formation between the C-terminal end of surface proteins and peptidoglycan cross-bridges within the bacterial cell wall envelope. The genomes of Gram-positive bacteria encode multiple sortase genes. Recent evidence suggests that sortase enzymes catalyze protein anchoring reactions of multiple different substrate classes with different sorting signal motif sequences, protein linkage to unique cell wall anchor structures as well as protein polymerization leading to the formation of pili on the surface of Gram-positive bacteria.     

Anchor structure of staphylococcal surface proteins. V. Anchor structure of the sortase B substrate IsdC

Staphylococcus aureus sortase A cleaves surface protein precursors bearing C-terminal LPXTG motif sorting signals between the threonine and glycine residues. Using lipid II precursor as cosubstrate, sortase A catalyzes the amide linkage between the carboxyl group of threonine and the amino group of pentaglycine cross-bridges, thereby tethering C-terminal ends of surface proteins to the bacterial cell wall envelope. Staphylococcal sortase B also anchors its only known substrate, the IsdC precursor with a C-terminal NPQTN motif sorting signal, to the cell wall envelope. Herein, we determined the cell wall anchor structure of IsdC. The sorting signal of IsdC is cleaved between threonine and asparagine of the NPQTN motif, and the carboxyl group of threonine is amide-linked to the amino group of pentaglycine crossbridges. In contrast to sortase A substrates, the anchor structure of IsdC displays shorter glycan strands and significantly less cell wall cross-linking. A model is proposed whereby sortases A and B recognize unique features of sorting signals and peptidoglycan substrates to deposit proteins with distinct topologies in the cell wall envelope.     

Two Crystal Structures of Pneumococcal Pilus Sortase C Provide Novel Insights into Catalysis and Substrate Specificity

The respiratory tract pathogen Streptococcus pneumoniae is a primary cause of morbidity and mortality worldwide. Pili enhance initial adhesion as well as the capacity of pneumococci to cause pneumonia and bacteremia. Pilus-associated sortases (SrtB, SrtC, and SrtD) are involved in the biogenesis of pneumococcal pili, composed of repeating units of RrgB that create the stalk to which the RrgA adhesin and the preferential pilus tip subunit RrgC are covalently associated. Using single sortase-expressing strains, we demonstrate that both pilin-polymerizing sortases SrtB and SrtC can covalently link pili to the peptidoglycan cell wall, a property shared with the non-pilus-polymerizing enzyme SrtD and the housekeeping sortase SrtA. Comparative analysis of the crystal structures of S. pneumoniae SrtC and SrtB revealed structural differences explaining the incapacity of SrtC, but not of SrtB, to incorporate RrgC into the pilus. Accordingly, site-directed mutagenesis of Thr¹⁶⁰ in SrtB to an arginine as in SrtC (Arg¹⁶⁰) partially converted its substrate specificity into that of SrtC. Solving two crystal structures for SrtC suggests that an opening of a flexible lid and a concomitant cysteine rotation are important for catalysis and the activation of the catalytic cysteine of pilus-associated sortases.     

Structural and Computational Studies of the Staphylococcus aureus Sortase B-Substrate Complex Reveal a Substrate-stabilized Oxyanion Hole

Sortase cysteine transpeptidases covalently attach proteins to the bacterial cell wall or assemble fiber-like pili that promote bacterial adhesion. Members of this enzyme superfamily are widely distributed in Gram-positive bacteria that frequently utilize multiple sortases to elaborate their peptidoglycan. Sortases catalyze transpeptidation using a conserved active site His-Cys-Arg triad that joins a sorting signal located at the C terminus of their protein substrate to an amino nucleophile located on the cell surface. However, despite extensive study, the catalytic mechanism and molecular basis of substrate recognition remains poorly understood. Here we report the crystal structure of the Staphylococcus aureus sortase B enzyme in a covalent complex with an analog of its NPQTN sorting signal substrate, revealing the structural basis through which it displays the IsdC protein involved in heme-iron scavenging from human hemoglobin. The results of computational modeling, molecular dynamics simulations, and targeted amino acid mutagenesis indicate that the backbone amide of Glu²²⁴ and the side chain of Arg²³³ form an oxyanion hole in sortase B that stabilizes high energy tetrahedral catalytic intermediates. Surprisingly, a highly conserved threonine residue within the bound sorting signal substrate facilitates construction of the oxyanion hole by stabilizing the position of the active site arginine residue via hydrogen bonding. Molecular dynamics simulations and primary sequence conservation suggest that the sorting signal-stabilized oxyanion hole is a universal feature of enzymes within the sortase superfamily.     

The crystal structure analysis of group B Streptococcus sortase C1: a model for the "lid" movement upon substrate binding

A unique feature of the class-C-type sortases, enzymes essential for Gram-positive pilus biogenesis, is the presence of a flexible “lid” anchored in the active site. However, the mechanistic details of the “lid” displacement, suggested to be a critical prelude for enzyme catalysis, are not yet known. This is partly due to the absence of enzyme-substrate and enzyme-inhibitor complex crystal structures. We have recently described the crystal structures of the Streptococcus agalactiae SAG2603 V/R sortase SrtC1 in two space groups (type II and type III) and that of its “lid” mutant and proposed a role of the “lid” as a protector of the active-site hydrophobic environment. Here, we report the crystal structures of SAG2603 V/R sortase C1 in a different space group (type I) and that of its complex with a small-molecule cysteine protease inhibitor. We observe that the catalytic Cys residue is covalently linked to the small-molecule inhibitor without lid displacement. However, the type I structure provides a view of the sortase SrtC1 lid displacement while having structural elements similar to a substrate sorting motif suitably positioned in the active site. We propose that these major conformational changes seen in the presence of a substrate mimic in the active site may represent universal features of class C sortase substrate recognition and enzyme activation.     

Overexpression and enzymatic characterization of Neisseria gonorrhoeae penicillin-binding protein 4.

The penicillin-binding proteins (PBPs) are ubiquitous bacterial enzymes involved in cell wall biosynthesis, and are the targets of the beta-lactam antibiotics. The low molecular mass Neisseria gonorrhoeae PBP 4 (NG PBP 4) is the fourth PBP revealed in the gonococcal genome. NG PBP 4 was cloned, overexpressed, purified, and characterized for beta-lactam binding, DD-carboxypeptidase activity, acyl-donor substrate specificity, transpeptidase activity, inhibition by a number of active site directed reagents, and pH profile. NG PBP 4 was efficiently acylated by penicillin (30,000 m-1.s-1). Against a set of five alpha- and epsilon-substituted l-Lys-D-Ala-D-Ala substrates, NG PBP 4 exhibited wide variation in specificity with a preference for N epsilon-acylated substrates, suggesting a possible preference for crosslinked pentapeptide substrates in the cell wall. Substrates with an N epsilon-Cbz group demonstrated pronounced substrate inhibition. NG PBP 4 showed 30-fold higher activity against the depsipeptide Lac-ester substrate than against the analogous peptide substrate, an indication that k2 (acylation) is rate determining for carboxypeptidase activity. No transpeptidase activity was apparent in a model transpeptidase reaction. Among a number of active site-directed agents, N-chlorosuccinimide, elastinal, iodoacetamide, iodoacetic acid, and phenylglyoxal gave substantial inhibition, and methyl boronic acid gave modest inhibition. The pH profile for activity against Ac2-l-Lys-D-Ala-d-Ala (kcat/Km) was bell-shaped, with pKa values at 6.9 and 10.1. Comparison of the enzymatic properties of NG PBP 4 with other DD-carboxypeptidases highlights both similarities and differences within these enzymes, and suggests the possibility of common mechanistic roles for the two highly conserved active site lysines in Class A and C low molecular mass PBPs.     

Kinetic mechanism of Staphylococcus aureus sortase SrtA

Staphylococcus aureus sortase (SrtA) is a thiol transpeptidase. The enzyme catalyzes a cell wall sorting reaction in which a surface protein with a sorting signal containing a LPXTG motif is cleaved between the threonine and glycine residues. The resulting threonine carboxyl end of this protein is covalently attached to a pentaglycine cross-bridge of peptidoglycan. The transpeptidase activity of sortase has been demonstrated in in vitro reactions between a LPETG-containing peptide and triglycine. When a nucleophile is not available, sortase slowly hydrolyzes the LPETG peptide at the same site. In this study, we have analyzed the steady-state kinetics of these two types of reactions catalyzed by sortase. The kinetic results fully support a ping-pong mechanism in which a common acyl-enzyme intermediate is formed in transpeptidation and hydrolysis. However, each reaction has a distinct rate-limiting step: the formation of the acyl-enzyme in transpeptidation and the hydrolysis of the same acyl-enzyme in the hydrolysis reaction. We have also demonstrated in this study that the nucleophile binding site of S. aureus sortase SrtA is specific for diglycine. While S1' and S2' sites of the enzyme both prefer a glycine residue, the S1' site is exclusively selective for glycine. Lengthening of the polyglycine acceptor nucleophile beyond diglycine does not further enhance the binding and catalysis.     

Activation of inhibitors by sortase triggers irreversible modification of the active site

Sortases anchor surface proteins to the cell wall of Gram-positive pathogens through recognition of specific motif sequences. Loss of sortase leads to large reductions in virulence, which identifies sortase as a target for the development of antibacterials. By screening 135,625 small molecules for inhibition, we report here that aryl (beta-amino)ethyl ketones inhibit sortase enzymes from staphylococci and bacilli. Inhibition of sortases occurs through an irreversible, covalent modification of their active site cysteine. Sortases specifically activate this class of molecules via beta-elimination, generating a reactive olefin intermediate that covalently modifies the cysteine thiol. Analysis of the three-dimensional structure of Bacillus anthracis sortase B with and without inhibitor provides insights into the mechanism of inhibition and reveals binding pockets that can be exploited for drug discovery.     

Peptidoglycan composition of a highly methicillin-resistant Staphylococcus aureus strain. The role of penicillin binding protein 2A.

All clinical isolates of methicillin-resistant Staphylococcus aureus contain an extra penicillin binding protein (PBP) 2A in addition to four PBPs present in all staphylococcal strains. This extra PBP is thought to be a transpeptidase essential for the continued cell wall synthesis and growth in the presence of beta-lactam antibiotics. As an approach of testing this hypothesis we compared the muropeptide composition of cell walls of a highly methicillin-resistant S. aureus strain containing PBP2A and its isogenic Tn551 derivative with reduced methicillin resistance, which contained no PBP2A because of the insertional inactivation of the PBP2A gene. Purified cell walls were hydrolyzed into muropeptides which were subsequently resolved by reversed-phase high-performance liquid chromatography and identified by chemical and mass spectrometric analysis. The peptidoglycan composition of the two strains were identical. Both peptidoglycans were highly cross-linked mainly through pentaglycine cross-bridges, although other, chemically distinct peptide cross-bridges were also present including mono-, tri-, and tetraglycine; alanine; and alanyl-tetraglycine. Our experiments provided no experimental data for a unique transpeptidase activity associated with PBP2A.     

Sortase enzymes in Gram-positive bacteria

In Gram-positive bacteria proteins are displayed on the cell surface using sortase enzymes. These cysteine transpeptidases join proteins bearing an appropriate sorting signal to strategically positioned amino groups on the cell surface. Working alone, or in concert with other enzymes, sortases either attach proteins to the cross-bridge peptide of the cell wall or they link proteins together to form pili. Because surface proteins play a fundamental role in microbial physiology and are frequently virulence factors, sortase enzymes have been intensely studied since their discovery a little more than a decade ago. Based on their primary sequences and functions sortases can be partitioned into distinct families called class A to F enzymes. Most bacteria elaborate their surfaces using more than one type of sortase that function non-redundantly by recognizing unique sorting signals within their protein substrates. Here we review what is known about the functions of these enzymes and the molecular basis of catalysis. Particular emphasis is placed on 'pilin' specific class C sortases that construct structurally complex pili. Exciting new data have revealed that these enzymes are amazingly promiscuous in the substrates that they can employ and that there is a startling degree of diversity in their mechanism of action. We also review recent data that suggest that sortases are targeted to specific sites on the cell surface where they work with other sortases and accessory factors to properly function.     

Catalytic mechanism of the Streptomyces K15 DD-transpeptidase/penicillin-binding protein probed by site-directed mutagenesis and structural analysis

The Streptomyces K15 penicillin-binding DD-transpeptidase is presumed to be involved in peptide cross-linking during bacterial cell wall peptidoglycan assembly. To gain insight into the catalytic mechanism, the roles of residues Lys38, Ser96, and Cys98, belonging to the structural elements defining the active site cleft, have been investigated by site-directed mutagenesis, biochemical studies, and X-ray diffraction analysis. The Lys38His and Ser96Ala mutations almost completely abolished the penicillin binding and severely impaired the transpeptidase activities while the geometry of the active site was essentially the same as in the wild-type enzyme. It is proposed that Lys38 acts as the catalytic base that abstracts a proton from the active serine Ser35 during nucleophilic attack and that Ser96 is a key intermediate in the proton transfer from the Ogamma of Ser35 to the substrate leaving group nitrogen. The role of these two residues should be conserved among penicillin-binding proteins containing the Ser-Xaa-Asn/Cys sequence in motif 2. Conversion of Cys98 into Asn decreased the transpeptidase activity and increased hydrolysis of the thiolester substrate and the acylation rate with most beta-lactam antibiotics. Cys98 is proposed to play the same role as Asn in motif 2 of other penicilloyl serine transferases in properly positioning the substrate for the catalytic process.     

Cell wall anchor structure of BcpA pili in Bacillus anthracis

Assembly of pili in Gram-positive bacteria and their attachment to the cell wall envelope are mediated by sortases. In Bacillus cereus and its close relative Bacillus anthracis, the major pilin protein BcpA is cleaved between the threonine and the glycine of its C-terminal LPXTG motif sorting signal by the pilin-specific sortase D. The resulting acyl enzyme intermediate is relieved by the nucleophilic attack of the side-chain amino group of lysine within the YPKN motif of another BcpA subunit. Cell wall anchoring of assembled BcpA pili requires sortase A, which also cleaves the LPXTG sorting signal of BcpA between its threonine and glycine residues. We show here that sortases A and D require only the C-terminal sorting signal of BcpA for substrate cleavage. Unlike sortase D, which accepts the YPKN motif as a nucleophile, sortase A forms an amide bond between the BcpA C-terminal carboxyl group of threonine and the side-chain amino group of diaminopimelic acid within the cell wall peptidoglycan of bacilli. These results represent the first demonstration of a cell wall anchor structure for pili, which are deposited by sortase A into the envelope of many different microbes.     

Sortases and the Art of Anchoring Proteins to the Envelopes of Gram-Positive Bacteria

The cell wall envelopes of gram-positive bacteria represent a surface organelle that not only functions as a cytoskeletal element but also promotes interactions between bacteria and their environment. Cell wall peptidoglycan is covalently and noncovalently decorated with teichoic acids, polysaccharides, and proteins. The sum of these molecular decorations provides bacterial envelopes with species- and strain-specific properties that are ultimately responsible for bacterial virulence, interactions with host immune systems, and the development of disease symptoms or successful outcomes of infections. Surface proteins typically carry two topogenic sequences, i.e., N-terminal signal peptides and C-terminal sorting signals. Sortases catalyze a transpeptidation reaction by first cleaving a surface protein substrate at the cell wall sorting signal. The resulting acyl enzyme intermediates between sortases and their substrates are then resolved by the nucleophilic attack of amino groups, typically provided by the cell wall cross bridges of peptidoglycan precursors. The surface protein linked to peptidoglycan is then incorporated into the envelope and displayed on the microbial surface. This review focuses on the mechanisms of surface protein anchoring to the cell wall envelope by sortases and the role that these enzymes play in bacterial physiology and pathogenesis.     

Sortases and the art of anchoring proteins to the envelopes of gram-positive bacteria.

The cell wall envelopes of gram-positive bacteria represent a surface organelle that not only functions as a cytoskeletal element but also promotes interactions between bacteria and their environment. Cell wall peptidoglycan is covalently and noncovalently decorated with teichoic acids, polysaccharides, and proteins. The sum of these molecular decorations provides bacterial envelopes with species- and strain-specific properties that are ultimately responsible for bacterial virulence, interactions with host immune systems, and the development of disease symptoms or successful outcomes of infections. Surface proteins typically carry two topogenic sequences, i.e., N-terminal signal peptides and C-terminal sorting signals. Sortases catalyze a transpeptidation reaction by first cleaving a surface protein substrate at the cell wall sorting signal. The resulting acyl enzyme intermediates between sortases and their substrates are then resolved by the nucleophilic attack of amino groups, typically provided by the cell wall cross bridges of peptidoglycan precursors. The surface protein linked to peptidoglycan is then incorporated into the envelope and displayed on the microbial surface. This review focuses on the mechanisms of surface protein anchoring to the cell wall envelope by sortases and the role that these enzymes play in bacterial physiology and pathogenesis.     

Functional characterization and localization of a Bacillus subtilis sortase and its substrate and use of this sortase system to covalently anchor a heterologous protein to the B. subtilis cell wall for surface display

Sortases catalyze the covalent anchoring of proteins to the cell surface on Gram-positive bacteria. Bioinformatic analysis suggests the presence of structural genes encoding sortases and their substrates in the Bacillus subtilis genome. In this study, a β-lactamase reporter was fused to the cell wall anchoring domain from a putative sortase substrate, YhcR. Covalent anchoring of this fusion protein to the cell wall was confirmed by using the eight-protease-deficient B. subtilis strain WB800 as the host. Inactivation of yhcS abolished the cell wall anchoring reaction. The amounts of fusion protein anchored to the cell wall were proportional to the levels of YhcS. These data demonstrate that YhcS and YhcR are the sortase and sortase substrate, respectively, in B. subtilis. Furthermore, yhcS is not essential for the survival of B. subtilis under the cultivation condition tested. YhcR fusions were distributed helically in the lateral cell wall. Interestingly, when viewed with an epifluorescence microscope, YhcS also appeared to form short helical arcs. This is the first report to illustrate such distribution of sortases in a rod-shaped bacterium. Models for the spatial distribution of both the sortase and its substrate are discussed. The amount of the reporters displayed on the surface was unambiguously quantified via a unique strategy. Under optimal conditions with the overproduction of YhcS, 47,300 YhcR fusions could be displayed per cell. Displayed reporters were biologically functional and surface accessible. Characterization of the sortase-substrate system allowed the successful development of a YhcR-based covalent surface display system. This system may have various biotechnological applications.     

Distribution of protein A on the surface of Staphylococcus aureus

Surface proteins of Staphylococcus aureus fulfill many important roles during the pathogenesis of human infections and are anchored to the cell wall envelope by sortases. Although the chemical linkage of proteins to cell wall cross bridges is known, the mechanisms whereby polypeptides are distributed on the staphylococcal surface have not been revealed. We show here that protein A, the ligand of immunoglobulin, is unevenly distributed over the staphylococcal surface. Upon removal with trypsin, newly synthesized polypeptide is deposited at two to four discrete foci. During subsequent growth, protein A appears to be slowly distributed from these sites. When viewed through multiple focal planes by laser scanning microscopy, protein A foci are arranged in a circle surrounding the bacterial cell. This pattern of distribution requires the LPXTG sorting signal of protein A as well as sortase A, the transpeptidase that anchors polypeptides to cell wall cross bridges. A model is presented whereby protein A deposition at discrete sites coupled with cell wall synthesis enables distribution of protein A on the staphylococcal surface.     

KDEL-tailed cysteine endopeptidases involved in programmed cell death, intercalation of new cells, and dismantling of extensin scaffolds

KDEL-tailed cysteine endopeptidases are a group of papain-type peptidases found in senescing tissue undergoing programmed cell death (PCD). Their genes have so far been cloned and analyzed in 12 angiosperms. They are synthesized as proenzymes with a C-terminal KDEL endoplasmatic reticulum retention signal, which is removed with the prosequence to activate enzyme activity. We previously identified three genes for KDEL-tailed cysteine endopeptidases (AtCEP1, AtCEP2, AtCEP3) in Arabidopsis thaliana. Transgenic plants of A. thaliana expressing β-glucuronidase (GUS) under the control of the promoters for the three genes were produced and analyzed histochemically. GUS activity was promoter- and tissue-specific GUS activity during seedling, flower, and root development, especially in tissues that collapse during final stages of PCD, and in the course of lateral root formation. KDEL-tailed cysteine endopeptidases are unique in being able to digest the extensins that form the basic scaffold for cell wall formation. The broad substrate specificity is due to the structure of the active site cleft of the KDEL-tailed cysteine endopeptidase that accepts a wide variety of amino acids, including proline and glycosylated hydroxyproline of the hydroxyproline rich glycoproteins of the cell wall.