Tensile properties of fibroblasts and vascular smooth muscle cells

Tensile properties of fibroblasts (FBs) and vascular smooth muscle cells (VSMCs) of synthetic and contractile phenotypes were studied using a newly developed micro-tensile tester. FBs were obtained from the rabbit patellar tendon. Synthetic and contractile VSMCs were isolated from the rabbit thoracic aorta with an explant and an enzymatic digestion method, respectively. Each cell was attached to the fine tips of a pair of micropipettes with a cell adhesive and, then, stretched at the speed of 6 microm/sec. Load and length were obtained using a cantilever-type load cell and a VDA, respectively.FBs were broken at the load of 0.9 microN and the elongation to failure of 86 microm, and had the stiffness of 0.02 N/m. VSMCs were not broken even at 2.4 microN. The stiffness of synthetic and contractile VSMCs were 0.09 and 0.17 N/m, respectively. Such large different tensile properties among the three cells are attributable to the differences in components and cytoskeletal structures.     

A new determination of the shear modulus of the human erythrocyte membrane using optical tweezers.

Optical tweezers are used to apply calibrated forces to human erythrocytes, via small silica beads bound to their membrane. The shear modulus mu of the membrane is inferred from measurements of the cell deformation in the small strain linear regime. We find the same result mu = 2.5 +/- 0.4 microN/m for both discotic and nearly spherical swollen cells. This value is smaller than the one deduced from micropipettes experiments. However the two methods do not operate in the same deformation regime and are not expected to lead to the same result.     

The Functional Width of the Dentino-Enamel Junction Determined by AFM-Based Nanoscratching

The dentino-enamel junction (DEJ) constitutes a structurally unique interphase uniting two mineralized tissues with very different matrix composition and physical properties. Its excellent biomechanical properties have drawn interest as a biomimetic model for joining dissimilar materials. In order to characterize the functional width of the DEJ, nanoscratching experiments were performed on human third molars. Friction coefficients of enamel, of dentin, and at the DEJ were obtained with a nanoscratch tester attached to an atomic force microscope (AFM). Normal loads in the range of 50 to 600 microN were applied to a spherical diamond indenter (r = 10 microm), which was driven 10 microm across the sample surface, recording the lateral force. Imaging with an AFM facilitated exact positioning of the scratches. The friction coefficient of intertubular dentin was 0.31 +/- 0.05, significantly above the coefficient of enamel of 0.14 +/- 0.02. The increased friction of dentin is attributed to the higher content of organic phases. Scratches performed across the interphase between enamel and dentin showed a sharp monotonic change in the friction coefficient. The average width of the slope between the friction coefficients of dentin and enamel was 2.0 +/- 1.1 microm and is assumed to represent the functional width of the dentino-enamel junction. The effect of the scalloped structure of the DEJ on its functional width as determined by mechanical testing is discussed.     

Characteristics of a membrane reservoir buffering membrane tension.

When membrane-attached beads are pulled vertically by a laser tweezers, a membrane tube of constant diameter (tether) is formed. We found that the force on the bead (tether force) did not depend on tether length over a wide range of tether lengths, which indicates that a previously unidentified reservoir of membrane and not stretch of the plasma membrane provides the tether membrane. Plots of tether force vs. tether length have an initial phase, an elongation phase, and an exponential phase. During the major elongation phase, tether force is constant, buffered by the "membrane reservoir." Finally, there is an abrupt exponential rise in force that brings the tether out of the trap, indicating depletion of the membrane reservoir. In chick embryo fibroblasts and 3T3 fibroblasts, the maximum tether lengths that can be pulled at a velocity of 4 microm/s are 5.1 +/- 0. 3 and 5.0 +/- 0.2 microm, respectively. To examine the importance of the actin cytoskeleton, we treated cells with cytochalasin B or D and found that the tether lengths increased dramatically to 13.8 +/- 0.8 and 12.0 +/- 0.7 microm, respectively. Similarly, treatment of the cells with colchicine and nocodazole results in more than a twofold increase in tether length. We found that elevation of membrane tension (through osmotic pressure, a long-term elevation of tether force, or a number of transitory increases) increased reservoir size over the whole cell. Using a tracking system to hold tether force on the bead constant near its maximal length in the exponential phase, the rate of elongation of the tethers was measured as a function of tether force (membrane tension). The rate of elongation of tethers was linearly dependent on the tether force and reflected an increase in size of the reservoir. Increases in the reservoir caused by tension increases on one side of the cell caused increases in reservoir size on the other side of the cell. Thus, we suggest that cells maintain a plasma membrane reservoir to buffer against changes in membrane tension and that the reservoir is increased with membrane tension or disruption of the cytoskeleton.     

Effect of resistance training on single muscle fiber contractile function in older men.

The purpose of this study was to examine single cell contractile mechanics of skeletal muscle before and after 12 wk of progressive resistance training (PRT) in older men (n = 7; age = 74 +/- 2 yr and weight = 75 +/- 5 kg). Knee extensor PRT was performed 3 days/wk at 80% of one-repetition maximum. Muscle biopsy samples were obtained from the vastus lateralis before and after PRT (pre- and post-PRT, respectively). For analysis, chemically skinned single muscle fibers were studied at 15 degrees C for peak tension [the maximal isometric force (P(o))], unloaded shortening velocity (V(o)), and force-velocity parameters. In this study, a total of 199 (89 pre- and 110 post-PRT) myosin heavy chain (MHC) I and 99 (55 pre- and 44 post-PRT) MHC IIa fibers were reported. Because of the minimal number of hybrid fibers identified post-PRT, direct comparisons were limited to MHC I and IIa fibers. Muscle fiber diameter increased 20% (83 +/- 1 to 100 +/- 1 microm) and 13% (86 +/- 1 to 97 +/- 2 microm) in MHC I and IIa fibers, respectively (P < 0.05). P(o) was higher (P < 0.05) in MHC I (0.58 +/- 0.02 to 0.90 +/- 0.02 mN) and IIa (0.68 +/- 0.02 to 0.85 +/- 0.03 mN) fibers. Muscle fiber V(o) was elevated 75% (MHC I) and 45% (MHC IIa) after PRT (P < 0.05). MHC I and IIa fiber power increased (P < 0.05) from 7.7 +/- 0.5 to 17.6 +/- 0.9 microN. fiber lengths. s(-1) and from 25.5 to 41.1 microN. fiber lengths. s(-1), respectively. These data indicate that PRT in elderly men increases muscle cell size, strength, contractile velocity, and power in both slow- and fast-twitch muscle fibers. However, it appears that these changes are more pronounced in the MHC I muscle fibers.     

Biomechanical interaction between hyphae of two Pythium species (Oomycota) and host tissues

Forces exerted by hyphae of the phytopathogen Pythium graminicola and mammalian pathogen Pythium insidiosum were compared with the mechanical resistance of their hosts' tissues. Hyphal apices of both species exerted a mean force of 2 microN, corresponding to mean pressures of 0.19 microN microm(-2) (or MPa) for P. graminicola, and 0.14 microN microm(-2) for P. insidiosum. Experiments with glass microprobes showed that the epidermis of grass roots resisted penetration until the pressure applied at the probe tip reached 1-12 microN microm(-2). Previously published data show that mammalian skin offers even greater resistance (10-47 microN microm(-2)). Clearly, tissue strength exceeds the pressures exerted by hyphae of these pathogens, verifying that secreted enzymes must play a critical role in reducing the resistance of plant and animal tissues. It is presumed that hyphae are sufficiently powerful to bore through any obstacles remaining after enzyme action.     

Diameter changes in skeletal muscle venules during arterial pressure reduction

Previous studies in skeletal muscle have shown a substantial (>100%) increase in venous vascular resistance with arterial pressure reduction to 40 mmHg, but a microcirculatory study showed no significant venular diameter changes in the horizontal direction during this procedure. To examine the possibility of venular collapse in the vertical direction, a microscope was placed horizontally to view a vertically mounted rat spinotrapezius muscle preparation. We monitored the diameters of venules (mean diameter 73. 8 +/- 37.0 microm, range 13-185 microm) oriented horizontally and vertically with a video system during acute arterial pressure reduction by hemorrhage. Our analysis showed small but significant (P < 0.0001) diameter reductions of 1.0 +/- 2.5 microm and 1.8 +/- 3. 1 microm in horizontally and vertically oriented venules, respectively, upon reduction of arterial pressure from 115.0 +/- 26. 3 to 39.8 +/- 12.3 mmHg. The venular responses were not different after red blood cell aggregation was induced by Dextran 500 infusion. We conclude that diameter changes in venules over this range of arterial pressure reduction are isotropic and would likely increase venous resistance by <10%.     

The actin-based nanomachine at the leading edge of migrating cells.

Two fundamental parameters of the highly dynamic, ultrathin lamellipodia of migrating fibroblasts have been determined-its thickness in living cells (176 +/- 14 nm), by standing-wave fluorescence microscopy, and its F-actin density (1580 +/- 613 microm of F-actin/microm(3)), via image-based photometry. In combination with data from previous studies, we have computed the density of growing actin filament ends at the lamellipodium margin (241 +/- 100/microm) and the maximum force (1.86 +/- 0.83 nN/microm) and pressure (10.5 +/- 4.8 kPa) obtainable via actin assembly. We have used cell deformability measurements (. J. Cell Sci. 44:187-200;. Proc. Natl. Acad. Sci. USA. 79:5327-5331) and an estimate of the force required to stall the polymerization of a single filament (. Proc. Natl. Acad. Sci. USA. 78:5613-5617;. Biophys. J. 65:316-324) to argue that actin assembly alone could drive lamellipodial extension directly.     

Contractility of single human dermal myofibroblasts and fibroblasts

Human dermal myofibroblasts, characterised by the expression of alpha-smooth muscle actin, are part of the granulation tissue and implicated in the generation of contractile forces during normal wound healing and pathological contractures. We have compared the contractile properties of single human dermal fibroblasts and human dermal myofibroblasts by culturing them on flexible silicone elastomers. The flexibility of the silicone substratum permits the contractile forces exerted by the cells to be measured [Fray et al., 1998: Tissue Eng. 4:273-283], without changing their expression of alpha-smooth muscle actin. The mean contractile force produced by myofibroblasts (2.2 microN per cell) was not significantly different from that generated by fibroblasts (2.0 microN per cell) when cultured on a substrata with a low elastomer stiffness. Forces produced by fibroblasts were unaffected by increases in elastomer stiffness, but forces measured for myofibroblasts increased to a mean value of 4.1 microN/cell. This was associated with a higher proportion of myofibroblasts being able to produce wrinkles on elastomers of high stiffness compared to fibroblasts. We discuss the force measurements at the single cell level, for both fibroblast and myofibroblasts, in relation to the proposed role of myofibroblasts in wound healing and pathological contractures.     

Mechanics of solid tissue invasion by the mammalian pathogen Pythium insidiosum.

The relative significance of mechanical penetration versus the action of substrate-degrading enzymes during solid tissue invasion has not been established for any fungal disease. Pythium insidiosum is an oomycete fungus (or stramenopile) that causes a rare, but potentially lethal infection in humans and other mammalian hosts. Experiments with miniature strain gauges showed that single hyphal apices of this pathogen exert forces of up to 6.9 microN, corresponding to maximum pressures of 0.3 microN microm(-2) or MPa. Samples of cutaneous and subcutaneous tissue from fresh human cadavers displayed a mean strength (resistance to needle puncture) of 24 microN microm(-2), and a mean pressure of 30 microN microm(-2) was necessary to penetrate skin strips from slaughtered horses. These experiments demonstrate that P. insidiosum does not exert sufficient pressure to penetrate undamaged skin by mechanics alone, but must effect a decisive reduction in tissue strength by proteinase secretion.     

Cell motility and local viscoelasticity of fibroblasts

Viscoelastic changes of the lamellipodial actin cytoskeleton are a fundamental element of cell motility. Thus, the correlation between the local viscoelastic properties of the lamellipodium (including the transitional region to the cell body) and the speed of lamellipodial extension is studied for normal and malignantly transformed fibroblasts. Using our atomic force microscopy-based microrheology technique, we found different mechanical properties between the lamellipodia of malignantly transformed fibroblasts (H-ras transformed and SV-T2 fibroblasts) and normal fibroblasts (BALB 3T3 fibroblasts). The average elastic constants, K, in the leading edge of SV-T2 fibroblasts (0.48 +/- 0.51 kPa) and of H-ras transformed fibroblasts (0.42 +/- 0.35 kPa) are significantly lower than that of BALB 3T3 fibroblasts (1.01 +/- 0.40 kPa). The analysis of time-lapse phase contrast images shows that the decrease in the elastic constant, K, for malignantly transformed fibroblasts is correlated with the enhanced motility of the lamellipodium. The measured mean speeds are 6.1 +/- 4.5 microm/h for BALB 3T3 fibroblasts, 13.1 +/- 5.2 microm/h for SV-T2 fibroblasts, and 26.2 +/- 11.5 microm/h for H-ras fibroblasts. Furthermore, the elastic constant, K, increases toward the cell body in many instances which coincide with an increase in actin filament density toward the cell body. The correlation between the enhanced motility and the decrease in viscoelastic moduli supports the Elastic Brownian Ratchet model for driving lamellipodia extension.     

Single-particle tracking of oriC-GFP fluorescent spots during chromosome segregation in Escherichia coli

DNA regions close to the origin of replication were visualized by the green fluorescent protein (GFP)-Lac repressor/lac operator system. The number of oriC-GFP fluorescent spots per cell and per nucleoid in batch-cultured cells corresponded to the theoretical DNA replication pattern. A similar pattern was observed in cells growing on microscope slides used for time-lapse experiments. The trajectories of 124 oriC-GFP spots were monitored by time-lapse microscopy of 31 cells at time intervals of 1, 2, and 3 min. Spot positions were determined along the short and long axis of cells. The lengthwise movement of spots was corrected for cell elongation. The step sizes of the spots showed a Gaussian distribution with a standard deviation of approximately 110 nm. Plots of the mean square displacement versus time indicated a free diffusion regime for spot movement along the long axis of the cell, with a diffusion coefficient of 4.3+/-2.6x10(-5) microm2/s. Spot movement along the short axis showed confinement in a region of the diameter of the nucleoid ( approximately 800 nm) with an effective diffusion coefficient of 2.9+/-1.7x10(-5) microm2/s. Confidence levels for the mean square displacement analysis were obtained from numerical simulations. We conclude from the analysis that within the experimental accuracy--the limits of which are indicated and discussed--there is no evidence that spot segregation requires any other mechanism than that of cell (length) growth.     

Temperature transition of human hemoglobin at body temperature: effects of calcium

We studied the effects of calcium ion concentration on the temperature dependence of rheological behavior of human red blood cells (RBCs) and concentrated hemoglobin solutions. Our previous study (G. M. Artmann, C. Kelemen, D. Porst, G. Büldt, and S. Chien, 1998, Biophys. J., 75:3179-3183) showed a critical temperature (Tc) of 36.4 +/- 0.3 degrees C at which the RBCs underwent a transition from non-passage to passage through 1.3 microm micropipettes in response to an aspiration pressure of -2.3 kPa. An increase in intracellular Ca2+ concentration by using the ionophore A23187 reduced the passability of intact RBCs through small micropipettes above T(c); the micropipette diameter needed for >90% passage increased to 1.7 microm. Viscometry of concentrated hemoglobin solutions (45 and 50 g/dl) showed a sudden viscosity transition at 36 +/- 1 degrees C (Tc(eta)) at all calcium concentrations investigated. Below Tc(eta), the viscosity value of the concentrated hemoglobin solution at 1.8 mM Ca(2+) was higher than that at other concentrations (0.2 microM, 9 mM, and 18 mM). Above Tc(eta), the viscosity was almost Ca2+ independent. At 1.8 mM Ca2+ and 36 +/- 1 degrees C, the activation energy calculated from the viscometry data showed a strong dependence on the hemoglobin concentration. We propose that the transition of rheological behavior is attributable to a high-to-low viscosity transition mediated by a partial release of the hemoglobin-bound water.     

In situ friction measurement on murine cartilage by atomic force microscopy

Articular cartilage provides a low-friction, wear-resistant surface for the motion of diarthrodial joints. The objective of this study was to develop a method for in situ friction measurement of murine cartilage using a colloidal probe attached to the cantilever of an atomic force microscope. Sliding friction was measured between a chemically functionalized microsphere and the cartilage of the murine femoral head. Friction was measured at normal loads ranging incrementally from 20 to 100 nN with a sliding speed of 40 microm/s and sliding distance of 64 microm. Under these test conditions, hydrostatic pressurization and biphasic load support in the cartilage were minimized, providing frictional measurements that predominantly reflect boundary lubrication properties. Friction coefficients measured on murine tissue (0.25+/-0.11) were similar to those measured on porcine tissue (0.23+/-0.09) and were in general agreement with measurements of boundary friction on cartilage by other researchers. Using the colloidal probe as an indenter, the elastic mechanical properties and surface roughness were measured in the same configuration. Interfacial shear was found to be the principal mechanism of friction generation, with little to no friction resulting from plowing forces, collision forces, or energy losses due to normal deformation. This measurement technique can be applied to future studies of cartilage friction and mechanical properties on genetically altered mice or other small animals.     

A new friction tester of the flexor tendon.

We have developed a new device to measure the friction force and calculate the friction coefficient between a rabbit flexor tendon, a pulley and a proximal phalanx. The flexor digitorum fibularis tendon of a rabbit was taken intact with the proximal phalanx, and tendon pulleys were attached to both ends of the bone. Both ends of the tendon were clamped to acrylic plates and connected to stainless-steel plates equipped with strain gauges. A pretension of 1.96 N was applied so as not to loosen the tendon. The proximal phalanx was fixed to an acrylic plate on the actuator, which gave 8 mm of transfer to the acrylic plate at a speed of 2 mm/s. The interface between the tendon and the surrounded tissue created the friction force, when the load was applied on the distal pulley. The friction force could be obtained from the difference between the tension of both ends of the tendon, which was measured with strain gauges and sampled with a personal computer. The friction force and the friction coefficient were calculated from the measured force and the applied load. The load and the pre-loading time, which was defined as loading duration before gliding, were varied in order to observe the change of the friction coefficient. The friction coefficient was not affected by the load and increased with the pre-loading time. The value of mu(s) ranged from 0.027 to 0.111 (0.072 +/- 0.023), and that of (mu)d ranged from 0.010 to 0.069 (0.039 +/- 0.014) (pre-loading time was 5 s). Our method will allow for the examination of various surgical treatments and lubricants. Moreover, it can be applied to other tissues of any animals with similar structures to the rabbit's digitorum.     

Mechanical and failure properties of single attached cells under compression

Eukaryotic cells are continuously subjected to mechanical forces under normal physiological conditions. These forces and associated cellular deformations induce a variety of biological processes. The degree of deformation depends on the mechanical properties of the cell. As most cells are anchorage dependent for normal functioning, it is important to study the mechanical properties of cells in their attached configuration. The goal of the present study was to obtain the mechanical and failure properties of attached cells. Individual, attached C2C12 mouse myoblasts were subjected to unconfined compression experiments using a recently developed loading device. The device allows global compression of the cell until cell rupture and simultaneously measures the associated forces. Cell bursting was characterized by a typical reduction in the force, referred to as the bursting force. Mean bursting forces were calculated as 8.7+/-2.5 microN at an axial strain of 72+/-4%. Visualization of the cell using confocal microscopy revealed that cell bursting was preceded by the formation of bulges at the cell membrane, which eventually led to rupturing of the cell membrane. Finite element calculations were performed to simulate the obtained force-deformation curves. A finite element mesh was built for each cell to account for its specific geometrical features. Using an axisymmetric approximation of the cell geometry, and a Neo-Hookean constitutive model, excellent agreement between predicted and measured force-deformation curves was obtained, yielding an average Young's modulus of 1.14+/-0.32 kPa.     

Light- and electron-microscope description of Kudoa paralichthys n. sp. (Myxozoa,Myxosporea) from the brain of cultured olive flounder Paralichthys olivaceus in Korea

A new Myxosporea, Kudoa paralichthys n. sp., is described from the brain of cultured olive flounder Paralichthys olivaceus in South Korea. Mature spores were quadrate in apical view, measuring 5.19 +/- 0.54 microm in length, 8.23 +/- 0.50 microm in width, and 6.87 +/- 0.45 microm in thickness. Four valves were equal in size, each with 1 polar capsule. Polar capsules were pyriform in shape, measuring 2.2 +/- 0.22 microm in length and 1.2 +/- 0.14 microm in breadth. The sporoplasm consisted of a larger outer cell completely surrounding a smaller inner one, and had cytoplasmic projections. The junctions of shell valves were L-shaped. The sutural planes converged at the anterior ends of the spores and were associated with 4 small apex prominences in the central meeting point of the spores.     

Generation and regulation of microtubule network asymmetry to drive cell polarity

Microtubules control cell architecture by serving as a scaffold for intracellular transport, signaling, and organelle positioning. Microtubules are intrinsically polarized, and their orientation, density, and post-translational modifications both respond and contribute to cell polarity. Animal cells that can rapidly reorient their polarity axis, such as fibroblasts, immune cells, and cancer cells, contain radially organized microtubule arrays anchored at the centrosome and the Golgi apparatus, whereas stably polarized cells often acquire non-centrosomal microtubule networks attached to the cell cortex, nucleus, or other structures. Microtubule density, longevity, and post-translational modifications strongly depend on the dynamics of their plus ends. Factors controlling microtubule plus-end dynamics are often part of cortical assemblies that integrate cytoskeletal organization, cell adhesion, and secretion and are subject to microtubule-dependent feedback regulation. Finally, microtubules can mechanically contribute to cell asymmetry by promoting cell elongation, a property that might be important for cells with dense microtubule arrays growing in soft environments.     

Myogenic and vasoconstrictor responsiveness of skeletal muscle arterioles is diminished by hindlimb unloading.

The purpose of the present study was to determine whether hindlimb unloading of rats alters vasoconstrictor and myogenic responsiveness of skeletal muscle arterioles. After either 2 wk of hindlimb unloading (HU) or cage control (C), second-order arterioles were isolated from the white portion of gastrocnemius (WG; C: n = 9, HU: n = 10) or soleus (Sol; C: n = 9, HU: n = 10) muscles and cannulated with two micropipettes connected to reservoir systems for in vitro study. Intraluminal pressure was set at 60 cmH2O. The arterioles were exposed to step changes in intraluminal pressure ranging from 20 to 140 cmH2O to determine myogenic responsiveness and to KCl (10-100 mM) and norepinephrine (10(-9)-10(-4) M) to determine vasoconstrictor responsiveness. Although maximal diameter of WG arterioles was not different between C (185 +/- 12 microm) and HU (191 +/- 14 microm) rats, WG arterioles from HU rats developed less spontaneous tone (C: 33 +/- 5%, HU 20 +/-3%), were unable to maintain myogenic tone at pressures from 140 to 100 cmH2O, and were less sensitive to the vasoconstrictor effects of KCl and norepinephrine (as indicated by a higher agonist concentration that produced 50% of maximal vasoconstrictor response). In contrast, maximal diameter of Sol arterioles from HU rats (117 +/- 12 microm) was smaller than that in C rats (148 +/- 14 microm). However, the development of spontaneous tone (C: 30 +/- 4%, HU: 36 +/- 5%), myogenic activity, and the responsiveness to vasoconstrictor agonists were not different between Sol arterioles from C and HU rats. These results indicate that hindlimb unloading diminishes the myogenic autoregulatory and contractile responsiveness of arterioles from muscle composed of type IIB fibers and suggest that the compromised ability to elevate vascular resistance after exposure to microgravity may be related to these vascular alterations. In addition, hindlimb unloading appears to induce vascular remodeling of arterioles from muscle composed of type I fibers, as indicated by the decrease in maximal diameter of arterioles from Sol muscle.     

Single cell mechanics of rat cardiomyocytes under isometric, unloaded, and physiologically loaded conditions

One of the most salient characteristics of the heart is its ability to adjust work output to external load. To examine whether a single cardiomyocyte preparation retains this property, we measured the contractile function of a single rat cardiomyocyte under a wide range of loading conditions using a force-length measurement system implemented with adaptive control. A pair of carbon fibers was used to clamp the cardiomyocyte, attached to each end under a microscope. One fiber was stiff, serving as a mechanical anchor, while the bending motion of the compliant fiber was monitored for force-length measurement. Furthermore, by controlling the position of the compliant fiber using a piezoelectric translator based on adaptive control, we could change load dynamically during contractions. Under unloaded conditions, maximal shortening velocity was 106 +/- 8.9 microm/s (n = 13 cells), and, under isometric conditions, peak developed force reached 5,720 nN (41.6 +/- 5.6 mN/mm(2); n = 17 cells). When we simulated physiological working conditions consisting of an isometric contraction, followed by shortening and relaxation, the average work output was 828 +/- 123 J/m(3) (n = 20 cells). The top left corners of tension-length loops obtained under all of these conditions approximate a line, analogous to the end-systolic pressure-volume relation of the ventricle. All of the functional characteristics described were analogous to those established by studies using papillary muscle or trabeculae preparations. In conclusion, the present results confirmed the fact that each myocyte forms the functional basis for ventricular function and that single cell mechanics can be a link between subcellular events and ventricular mechanics.