A structural and thermodynamic escape mechanism from a drug resistant mutation of the HIV-1 protease

The efficacy of HIV-1 protease inhibition therapies is often compromised by the appearance of mutations in the protease molecule that lower the binding affinity of inhibitors while maintaining viable catalytic activity and substrate affinity. The V82F/I84V double mutation is located within the binding site cavity and affects all protease inhibitors in clinical use. KNI-764, a second-generation inhibitor currently under development, maintains significant potency against this mutation by entropically compensating for enthalpic losses, thus minimizing the loss in binding affinity. KNI-577 differs from KNI-764 by a single functional group critical to the inhibitor response to the protease mutation. This single difference changes the response of the two inhibitors to the mutation by one order of magnitude. Accordingly, a structural understanding of the inhibitor response will provide important guidelines for the design of inhibitors that are less susceptible to mutations conveying drug resistance. The structures of the two compounds bound to the wild type and V82F/I84V HIV-1 protease have been determined by X-ray crystallography at 2.0 A resolution. The presence of two asymmetric functional groups, linked by rotatable bonds to the inhibitor scaffold, allows KNI-764 to adapt to the mutated binding site cavity more readily than KNI-577, with a single asymmetric group. Both inhibitors lose about 2.5 kcal/mol in binding enthalpy when facing the drug-resistant mutant protease; however KNI-764 gains binding entropy while KNI-577 loses binding entropy. The gain in binding entropy by KNI-764 accounts for its low susceptibility to the drug-resistant mutation. The heat capacity change associated with binding becomes more negative when KNI-764 binds to the mutant protease, consistent with increased desolvation. With KNI-577, the opposite effect is observed. Structurally, the crystallographic B factors increase for KNI-764 when it is bound to the drug-resistant mutant. The opposite is observed for KNI-577. Consistent with these observations, it appears that KNI-764 is able to gain binding entropy by a two-fold mechanism: it gains solvation entropy by burying itself deeper within the binding pocket and gains conformational entropy by losing interaction with the protease.     

Overcoming drug resistance in HIV-1 chemotherapy: the binding thermodynamics of Amprenavir and TMC-126 to wild-type and drug-resistant mutants of the HIV-1 protease

Amprenavir is one of six protease inhibitors presently approved for clinical use in the therapeutic treatment of AIDS. Biochemical and clinical studies have shown that, unlike other inhibitors, Amprenavir is severely affected by the protease mutation I50V, located in the flap region of the enzyme. TMC-126 is a second-generation inhibitor, chemically related to Amprenavir, with a reported extremely low susceptibility to existing resistant mutations including I50V. In this paper, we have studied the thermodynamic and molecular origin of the response of these two inhibitors to the I50V mutation and the double active-site mutation V82F/I84V that affects all existing clinical inhibitors. Amprenavir binds to the wild-type HIV-1 protease with high affinity (5.0 x 10(9) M(-1) or 200 pM) in a process equally favored by enthalpic and entropic contributions. The mutations I50V and V82F/I84V lower the binding affinity of Amprenavir by a factor of 147 and 104, respectively. TMC-126, on the other hand, binds to the wild-type protease with extremely high binding affinity (2.6 x 10(11) M(-1) or 3.9 pM) in a process in which enthalpic contributions overpower entropic contributions by almost a factor of 4. The mutations I50V and V82F/I84V lower the binding affinity of TMC-126 by only a factor of 16 and 11, respectively, indicating that the binding affinity of TMC-126 to the drug-resistant mutants is still higher than the affinity of Amprenavir to the wild-type protease. Analysis of the data for TMC-126 and KNI-764, another second-generation inhibitor, indicates that their low susceptibility to mutations is caused by their ability to compensate for the loss of interactions with the mutated target by a more favorable entropy of binding.     

Thermodynamic dissection of the binding energetics of KNI-272, a potent HIV-1 protease inhibitor

KNI-272 is a powerful HIV-1 protease inhibitor with a reported inhibition constant in the picomolar range. In this paper, a complete experimental dissection of the thermodynamic forces that define the binding affinity of this inhibitor to the wild-type and drug-resistant mutant V82F/184V is presented. Unlike other protease inhibitors, KNI-272 binds to the protease with a favorable binding enthalpy. The origin of the favorable binding enthalpy has been traced to the coupling of the binding reaction to the burial of six water molecules. These bound water molecules, previously identified by NMR studies, optimize the atomic packing at the inhibitor/protein interface enhancing van der Waals and other favorable interactions. These interactions offset the unfavorable enthalpy usually associated with the binding of hydrophobic molecules. The association constant to the drug resistant mutant is 100-500 times weaker. The decrease in binding affinity corresponds to an increase in the Gibbs energy of binding of 3-3.5 kcal/mol, which originates from less favorable enthalpy (1.7 kcal/mol more positive) and entropy changes. Calorimetric binding experiments performed as a function of pH and utilizing buffers with different ionization enthalpies have permitted the dissection of proton linkage effects. According to these experiments, the binding of the inhibitor is linked to the protonation/deprotonation of two groups. In the uncomplexed form these groups have pKs of 6.0 and 4.8, and become 6.6 and 2.9 in the complex. These groups have been identified as one of the aspartates in the catalytic aspartyl dyad in the protease and the isoquinoline nitrogen in the inhibitor molecule. The binding affinity is maximal between pH 5 and pH 6. At those pH values the affinity is close to 6 x 10(10) M(-1) (Kd = 16 pM). Global analysis of the data yield a buffer- and pH-independent binding enthalpy of -6.3 kcal/mol. Under conditions in which the exchange of protons is zero, the Gibbs energy of binding is -14.7 kcal/mol from which a binding entropy of 28 cal/K mol is obtained. Thus, the binding of KNI-272 is both enthalpically and entropically favorable. The structure-based thermodynamic analysis indicates that the allophenylnorstatine nucleus of KNI-272 provides an important scaffold for the design of inhibitors that are less susceptible to resistant mutations.     

Thermodynamic basis of resistance to HIV-1 protease inhibition: calorimetric analysis of the V82F/I84V active site resistant mutant

One of the most serious side effects associated with the therapy of HIV-1 infection is the appearance of viral strains that exhibit resistance to protease inhibitors. The active site mutant V82F/I84V has been shown to lower the binding affinity of protease inhibitors in clinical use. To identify the origin of this effect, we have investigated the binding thermodynamics of the protease inhibitors indinavir, ritonavir, saquinavir, and nelfinavir to the wild-type HIV-1 protease and to the V82F/I84V resistant mutant. The main driving force for the binding of all four inhibitors is a large positive entropy change originating from the burial of a significant hydrophobic surface upon binding. At 25 degrees C, the binding enthalpy is unfavorable for all inhibitors except ritonavir, for which it is slightly favorable (-2.3 kcal/mol). Since the inhibitors are preshaped to the geometry of the binding site, their conformational entropy loss upon binding is small, a property that contributes to their high binding affinity. The V82F/I84V active site mutation lowers the affinity of the inhibitors by making the binding enthalpy more positive and making the entropy change slightly less favorable. The effect on the enthalpy change is, however, the major one. The predominantly enthalpic effect of the V82F/I84V mutation is consistent with the idea that the introduction of the bulkier Phe side chain at position 82 and the Val side chain at position 84 distort the binding site and weaken van der Waals and other favorable interactions with inhibitors preshaped to the wild-type binding site. Another contribution of the V82F/I84V to binding affinity originates from an increase in the energy penalty associated with the conformational change of the protease upon binding. The V82F/I84V mutant is structurally more stable than the wild-type protease by about 1.4 kcal/mol. This effect, however, affects equally the binding affinity of substrate and inhibitors.     

Unique thermodynamic response of tipranavir to human immunodeficiency virus type 1 protease drug resistance mutations

Drug resistance is a major problem affecting the clinical efficacy of antiretroviral agents, including protease inhibitors, in the treatment of infection with human immunodeficiency virus type 1 (HIV-1)/AIDS. Consequently, the elucidation of the mechanisms by which HIV-1 protease inhibitors maintain antiviral activity in the presence of mutations is critical to the development of superior inhibitors. Tipranavir, a nonpeptidic HIV-1 protease inhibitor, has been recently approved for the treatment of HIV infection. Tipranavir inhibits wild-type protease with high potency (K(i) = 19 pM) and demonstrates durable efficacy in the treatment of patients infected with HIV-1 strains containing multiple common mutations associated with resistance. The high potency of tipranavir results from a very large favorable entropy change (-TDeltaS = -14.6 kcal/mol) combined with a favorable, albeit small, enthalpy change (DeltaH = -0.7 kcal/mol, 25 degrees C). Characterization of tipranavir binding to wild-type protease, active site mutants I50V and V82F/I84V, the multidrug-resistant mutant L10I/L33I/M46I/I54V/L63I/V82A/I84V/L90M, and the tipranavir in vitro-selected mutant I13V/V32L/L33F/K45I/V82L/I84V was performed by isothermal titration calorimetry and crystallography. Thermodynamically, the good response of tipranavir arises from a unique behavior: it compensates for entropic losses by actual enthalpic gains or by sustaining minimal enthalpic losses when facing the mutants. The net result is a small loss in binding affinity. Structurally, tipranavir establishes a very strong hydrogen bond network with invariant regions of the protease, which is maintained with the mutants, including catalytic Asp25 and the backbone of Asp29, Asp30, Gly48 and Ile50. Moreover, tipranavir forms hydrogen bonds directly to Ile50, while all other inhibitors do so by being mediated by a water molecule.     

Amplification of the effects of drug resistance mutations by background polymorphisms in HIV-1 protease from African subtypes

The vast majority of HIV-1 infections worldwide are caused by the C and A viral subtypes rather than the B subtype prevalent in the United States and Western Europe. Genomic differences between subtypes give rise to sequence variations in the encoded proteins, including those identified as targets for antiretroviral therapies. In the case of the HIV-1 protease, we reported earlier [Velazquez-Campoy et al. (2001) Proc. Natl. Acad. Sci. U.S.A. 98, 6062-6067] that proteases from the C and A subtypes exhibit a higher biochemical fitness in the presence of widely prescribed protease inhibitors. In this paper we present a complete thermodynamic dissection of the differences between proteases from different subtypes and the effects of the V82F/I84V drug-resistant mutation within the framework of the B, C, and A subtypes. These studies involved four inhibitors in clinical use (indinavir, saquinavir, ritonavir, and nelfinavir) and a second-generation protease inhibitor (KNI-764). Naturally occurring amino acid polymorphisms found in proteases from the C and A subtypes lower the binding affinities of existing clinical inhibitors by factors ranging between 2 and 7.5 which by themselves are not enough to cause drug resistance. The preexisting lower affinity in the C and A subtypes, however, significantly amplifies the effects of the drug-resistant mutation. Relative to the wild-type B subtype protease, the V82F/I84V drug-resistant mutation within the C and A subtypes lowers the binding affinity of inhibitors by factors ranging between 40 and 3000. When the enzyme kinetic properties (k(cat) and K(m)) are included in the analysis, the biochemical fitness of the C and A subtype drug-resistant mutants can be up to 1000-fold higher than that of the wild-type B subtype protease in the presence of the studied inhibitors. From a thermodynamic standpoint, the combined effects of the drug-resistant mutations and the natural amino acid polymorphisms on the Gibbs energy are additive and involve significant alterations in the enthalpy and entropy changes associated with inhibitor binding. At the biochemical level, the combined effects of naturally existing polymorphisms and drug-resistant mutations might have important consequences on the long-term viability of current HIV-1 protease inhibitors.     

The binding of HIV-1 protease inhibitors to human serum proteins

The non-specific binding of a drug to plasma proteins is an important determinant of its biological efficacy since it modulates the availability of the drug to its intended target. In the case of HIV-1 protease inhibitors, binding to human serum albumin (HSA) and alpha(1)-acid glycoprotein (AAG) appears to be an important modulator of drug bioavailability. From a thermodynamic point of view, the issue of drug availability to the desired target can be formulated as a multiple equilibrium problem in which a ligand is able to bind to different proteins or other macromolecules with different binding affinities. Previously, we have measured the binding thermodynamics of HIV-1 protease inhibitors to their target. In this article, the binding energetics of four inhibitors currently in clinical use (saquinavir, indinavir, ritonavir and nelfinavir) and a second-generation inhibitor (KNI-764) to human HSA and AAG has been studied by isothermal titration calorimetry. All inhibitors exhibited a significant affinity for AAG (K(a) approximately 0.5-10 x 10(5) M(-1)) and a relatively low affinity for HSA (K(a) approximately 5-15 x 10(3) M(-1)). It is shown that under conditions that simulate in vivo concentrations of serum proteins, the inhibitor concentrations required to achieve 95% protease inhibition can be up to 10 times higher than those required in the absence of serum proteins. The effect is compounded in patients infected with drug resistant HIV-1 strains that exhibit a lower affinity for protease inhibitors. In these cases the required inhibitor concentrations can be up to 2000 times higher and beyond the solubility limits of the inhibitors.     

Structural and thermodynamic basis for the binding of TMC114, a next-generation human immunodeficiency virus type 1 protease inhibitor

TMC114, a newly designed human immunodeficiency virus type 1 (HIV-1) protease inhibitor, is extremely potent against both wild-type (wt) and multidrug-resistant (MDR) viruses in vitro as well as in vivo. Although chemically similar to amprenavir (APV), the potency of TMC114 is substantially greater. To examine the basis for this potency, we solved crystal structures of TMC114 complexed with wt HIV-1 protease and TMC114 and APV complexed with an MDR (L63P, V82T, and I84V) protease variant. In addition, we determined the corresponding binding thermodynamics by isothermal titration calorimetry. TMC114 binds approximately 2 orders of magnitude more tightly to the wt enzyme (K(d) = 4.5 x 10(-12) M) than APV (K(d) = 3.9 x 10(-10) M). Our X-ray data (resolution ranging from 2.2 to 1.2 A) reveal strong interactions between the bis-tetrahydrofuranyl urethane moiety of TMC114 and main-chain atoms of D29 and D30. These interactions appear largely responsible for TMC114's very favorable binding enthalpy to the wt protease (-12.1 kcal/mol). However, TMC114 binding to the MDR HIV-1 protease is reduced by a factor of 13.3, whereas the APV binding constant is reduced only by a factor of 5.1. However, even with the reduction in binding affinity to the MDR HIV protease, TMC114 still binds with an affinity that is more than 1.5 orders of magnitude tighter than the first-generation inhibitors. Both APV and TMC114 fit predominantly within the substrate envelope, a property that may be associated with decreased susceptibility to drug-resistant mutations relative to that of first-generation inhibitors. Overall, TMC114's potency against MDR viruses is likely a combination of its extremely high affinity and close fit within the substrate envelope.     

HIV-1 protease inhibitors: enthalpic versus entropic optimization of the binding affinity

Existing experimental as well as computational screening methods select potential ligands or drug candidates on the basis of binding affinity. Since the binding affinity is a function of the enthalpy (DeltaH) and entropy (DeltaS) changes, it is apparent that improved binding can be achieved in different ways: by optimizing DeltaH, DeltaS, or a combination of both. However, the behavior of enthalpically or entropically optimized inhibitors is fundamentally different, including their response to mutations that may elicit drug resistance. In the design of HIV-1 protease inhibitors, high binding affinity has usually been achieved by preshaping lead compounds to the geometry of the binding site and by incorporating a high degree of hydrophobicity. The thermodynamic consequence of that approach is that the binding affinity of the resulting inhibitors becomes entropically favorable but enthalpically unfavorable. Specifically, the resulting high binding affinity is due to an increased solvation entropy (hydrophobic effect) combined with a reduced loss of conformational entropy of the inhibitor upon binding (structural rigidity). Here we report that tripeptide inhibitors derived from the transframe region of Gag-Pol (Glu-Asp-Leu and Glu-Asp-Phe) bind to the HIV-1 protease with a favorable enthalpy change. This behavior is qualitatively different from that of known inhibitors and points to new strategies for inhibitor design. Since the binding affinities of enthalpically favorable and enthalpically unfavorable inhibitors have opposite temperature dependence, it is possible to design fast screening protocols that simultaneously select inhibitors on the basis of affinity and enthalpy.     

Structure-activity and structure-metabolism relationships of HIV protease inhibitors containing the 3-hydroxy-2-methylbenzoyl-allophenylnorstatine structure

A series of peptidomimetic human immunodeficiency virus (HIV) protease inhibitors containing substituted all-phenylnorstatine [APNS: (2S,3S)-3-amino-2-hydroxy-4-phenylbutyric acid] were designed and synthesized. From the structure-metabolism relationship of this type of HIV protease inhibitors, the compounds having para substitution of the phenyl ring of Apns and/or 2,6-disubstitution of the P2' benzylamine were found to be able to avoid the P2 phenol glucuronidation that occurs with SM-319777 (formerly named JE-2147, KNI-764); one of the main metabolic pathways of SM-319777. These new analogues, such as SM-322377, had more desirable pharmacokinetic profiles and more potent antiviral activity against not only wild type HIV-1 but also the multi-drug-resistant HIV-1 than SM-319777.     

Thermodynamic rules for the design of high affinity HIV-1 protease inhibitors with adaptability to mutations and high selectivity towards unwanted targets

Protease inhibitors are key components in the chemotherapy of HIV-1 infection. However, the long term efficacy of antiretroviral therapies is hampered by issues of patient compliance often associated with the presence of severe side effects, and above all by the appearance of drug resistance. The development of new protease inhibitors with high potency, low susceptibility to mutations and minimal affinity for unwanted targets is an urgent goal. The engineering of these adaptive inhibitors requires identification of the critical determinants of affinity, adaptability, and selectivity. Analysis of the binding database for existing clinical and experimental inhibitors has allowed us to address the following questions in a quantitative fashion: (1) Is there an optimal binding affinity? Or, are the highest affinity inhibitors necessarily the best inhibitors? (2) What is the dependence of optimal affinity on adaptability and selectivity? (3) What are the determinants of adaptability to mutations associated with drug resistance? (4) How selectivity against unwanted targets can be improved? It is shown that the optimal affinity is a function of the effective target concentration and the desired adaptability and selectivity factors. Furthermore, knowledge of the enthalpic and entropic contributions to the binding affinity to the wild type provides a way of anticipating the response of an inhibitor to mutations associated with drug resistance, and therefore, a valuable guideline for optimization.     

Multidrug resistance to HIV-1 protease inhibition requires cooperative coupling between distal mutations

The appearance of viral strains that are resistant to protease inhibitors is one of the most serious problems in the chemotherapy of HIV-1/AIDS. The most pervasive drug-resistant mutants are those that affect all inhibitors in clinical use. In this paper, we have characterized a multiple-drug-resistant mutant of the HIV-1 protease that affects indinavir, nelfinavir, saquinavir, ritonavir, amprenavir, and lopinavir. This mutant (MDR-HM) contains six amino acid mutations (L10I/M46I/I54V/V82A/I84V/L90M) located within and outside the active site of the enzyme. Microcalorimetric and enzyme kinetic measurements indicate that this mutant lowers the affinity of all inhibitors by 2-3 orders of magnitude. By comparison, the multiiple-drug-resistant mutant only increased the K(m) of the substrate by a factor of 2, indicating that the substrate is able to adapt to the changes caused by the mutations and maintain its binding affinity. To understand the origin of resistance, three submutants containing mutations in specific regions were also studied, i.e., the active site (V82A/I84V), flap region (M46I/I54V), and dimerization region (L10I/L90M). None of these sets of mutations by themselves lowered the affinity of inhibitors by more than 1 order of magnitude, and additionally, the sum of the effects of each set of mutations did not add up to the overall effect, indicating the presence of cooperative effects. A mutant containing only the four active site mutations (V82A/I84V/M46I/I54V) only showed a small cooperative effect, suggesting that the mutations at the dimer interface (L10I/L90M) play a major role in eliciting a cooperative response. These studies demonstrate that cooperative interactions contribute an average of 1.2 +/- 0.7 kcal/mol to the overall resistance, most of the cooperative effect (0.8 +/- 0.7 kcal/mol) being mediated by the mutations at the dimerization interface. Not all inhibitors in clinical use are affected the same by long-range cooperative interactions between mutations. These interactions can amplify the effects of individual mutations by factors ranging between 2 and 40 depending on the inhibitor. Dissection of the energetics of drug resistance into enthalpic and entropic components provides a quantitative account of the inhibitor response and a set of thermodynamic guidelines for the design of inhibitors with a lower susceptibility to this type of mutations.     

Synthesis and antiviral property of allophenylnorstatine-based HIV protease inhibitors incorporating D-cysteine derivatives as P2/P3 moieties

We designed several HIV protease inhibitors with various d-cysteine derivatives as P(2)/P(3) moieties based on the structure of clinical drug candidate, KNI-764. Herein, we report their synthesis, HIV protease inhibitory activity, HIV IIIB cell inhibitory activity, cellular toxicity, and inhibitory activity against drug-resistant HIV strains. KNI-1931 showed distinct selectivity against HIV proteases and high potency against drug-resistant strains, surpassing those of Ritonavir and Nelfinavir.     

Lack of synergy for inhibitors targeting a multi-drug-resistant HIV-1 protease

The three-dimensional structures of indinavir and three newly synthesized indinavir analogs in complex with a multi-drug-resistant variant (L63P, V82T, I84V) of HIV-1 protease were determined to approximately 2.2 A resolution. Two of the three analogs have only a single modification of indinavir, and their binding affinities to the variant HIV-1 protease are enhanced over that of indinavir. However, when both modifications were combined into a single compound, the binding affinity to the protease variant was reduced. On close examination, the structural rearrangements in the protease that occur in the tightest binding inhibitor complex are mutually exclusive with the structural rearrangements seen in the second tightest inhibitor complex. This occurs as adaptations in the S1 pocket of one monomer propagate through the dimer and affect the conformation of the S1 loop near P81 of the other monomer. Therefore, structural rearrangements that occur within the protease when it binds to an inhibitor with a single modification must be accounted for in the design of inhibitors with multiple modifications. This consideration is necessary to develop inhibitors that bind sufficiently tightly to drug-resistant variants of HIV-1 protease to potentially become the next generation of therapeutic agents.     

Amino acid substitutions in Gag protein at non-cleavage sites are indispensable for the development of a high multitude of HIV-1 resistance against protease inhibitors.

Amino acid substitutions in human immunodeficiency virus type 1 (HIV-1) Gag cleavage sites have been identified in HIV-1 isolated from patients with AIDS failing chemotherapy containing protease inhibitors (PIs). However, a number of highly PI-resistant HIV-1 variants lack cleavage site amino acid substitutions. In this study we identified multiple novel amino acid substitutions including L75R, H219Q, V390D/V390A, R409K, and E468K in the Gag protein at non-cleavage sites in common among HIV-1 variants selected against the following four PIs: amprenavir, JE-2147, KNI-272, and UIC-94003. Analyses of replication profiles of various mutant clones including competitive HIV-1 replication assays demonstrated that these mutations were indispensable for HIV-1 replication in the presence of PIs. When some of these mutations were reverted to wild type amino acids, such HIV-1 clones failed to replicate. However, virtually the same Gag cleavage pattern was seen, indicating that the mutations affected Gag protein functions but not their cleavage sensitivity to protease. These data strongly suggest that non-cleavage site amino acid substitutions in the Gag protein recover the reduced replicative fitness of HIV-1 caused by mutations in the viral protease and may open a new avenue for designing PIs that resist the emergence of PI-resistant HIV-1.     

X-ray crystal structures of human immunodeficiency virus type 1 protease mutants complexed with atazanavir

Atazanavir, which is marketed as REYATAZ, is the first human immunodeficiency virus type 1 (HIV-1) protease inhibitor approved for once-daily administration. As previously reported, atazanavir offers improved inhibitory profiles against several common variants of HIV-1 protease over those of the other peptidomimetic inhibitors currently on the market. This work describes the X-ray crystal structures of complexes of atazanavir with two HIV-1 protease variants, namely, (i) an enzyme optimized for resistance to autolysis and oxidation, referred to as the cleavage-resistant mutant (CRM); and (ii) the M46I/V82F/I84V/L90M mutant of the CRM enzyme, which is resistant to all approved HIV-1 protease inhibitors, referred to as the inhibitor-resistant mutant. In these two complexes, atazanavir adopts distinct bound conformations in response to the V82F substitution, which may explain why this substitution, at least in isolation, has yet to be selected in vitro or in the clinic. Because of its nearly symmetrical chemical structure, atazanavir is able to make several analogous contacts with each monomer of the biological dimer.     

Drug resistance mutations can effect dimer stability of HIV-1 protease at neutral pH.

The monomer-dimer equilibrium for the human immunodeficiency virus type 1 (HIV-1) protease has been investigated under physiological conditions. Dimer dissociation at pH 7.0 was correlated with a loss in beta-sheet structure and a lower degree of ANS binding. An autolysis-resistant mutant, Q7K/L33I/L63I, was used to facilitate sedimentation equilibrium studies at neutral pH where the wild-type enzyme is typically unstable in the absence of bound inhibitor. The dimer dissociation constant (KD) of the triple mutant was 5.8 microM at pH 7.0 and was below the limit of measurement (approximately 100 nM) at pH 4.5. Similar studies using the catalytically inactive D25N mutant yielded a KD value of 1.0 microM at pH 7.0. These values differ significantly from a previously reported value of 23 nM obtained indirectly from inhibitor binding measurements (Darke et al., 1994). We show that the discrepancy may result from the thermodynamic linkage between the monomer-dimer and inhibitor binding equilibria. Under conditions where a significant degree of monomer is present, both substrates and competitive inhibitors will shift the equilibrium toward the dimer, resulting in apparent increases in dimer stability and decreases in ligand binding affinity. Sedimentation equilibrium studies were also carried out on several drug-resistant HIV-1 protease mutants: V82F, V82F/I84V, V82T/I84V, and L90M. All four mutants exhibited reduced dimer stability relative to the autolysis-resistant mutant at pH 7.0. Our results indicate that reductions in drug affinity may be due to the combined effects of mutations on both dimer stability and inhibitor binding.     

Nine Crystal Structures Determine the Substrate Envelope of the MDR HIV-1 Protease

Under drug selection pressure, emerging mutations render HIV-1 protease drug resistant, leading to the therapy failure in anti-HIV treatment. It is known that nine substrate cleavage site peptides bind to wild type (WT) HIV-1 protease in a conserved pattern. However, how the multidrug-resistant (MDR) HIV-1 protease binds to the substrate cleavage site peptides is yet to be determined. MDR769 HIV-1 protease (resistant mutations at residues 10, 36, 46, 54, 62, 63, 71, 82, 84, and 90) was selected for present study to understand the binding to its natural substrates. MDR769 HIV-1 protease was co-crystallized with nine substrate cleavage site hepta-peptides. Crystallographic studies show that MDR769 HIV-1 protease has an expanded substrate envelope with wide open flaps. Furthermore, ligand binding energy calculations indicate weaker binding in MDR769 HIV-1 protease-substrate complexes. These results help in designing the next generation of HIV-1 protease inhibitors by targeting the MDR HIV-1 protease.     

The effect of inhibitor binding on the structural stability and cooperativity of the HIV-1 protease.

The effects of the peptide inhibitor acetyl pepstatin on the structural stability of the HIV-1 protease have been measured by high sensitivity calorimetric techniques. At 25 degrees C and pH 3.6, acetyl pepstatin binds to HIV-1 protease with an affinity of 1.6 x 10(7 )M-1 and an enthalpy of 7.3 +/- 0.5 kcal/mol, indicating that binding is not favored enthalpically and that the favorable Gibbs energy originates from a large positive entropy. Since the binding of acetyl pepstatin is associated with a negative change in heat capacity (-450 cal/K*mol) the association reaction becomes enthalpically favored at temperatures higher than 40 degrees C. The presence of the inhibitor stabilizes the dimeric structure of the protease in a fashion that can be quantitatively described by a set of thermodynamic linkage equations. The combination of titration and differential scanning calorimetry provides an accurate way of determining binding constants for high affinity inhibitors that cannot be determined by titration calorimetry alone. A structure-based thermodynamic analysis of the binding process indicates that the stabilization effect is not distributed uniformly throughout the protease molecule. The binding of the inhibitor selectively stabilizes those conformational states in which the binding site is formed, triggering a redistribution of the state probabilities in the ensemble of conformations populated under native conditions. As a result, the stability constants for individual residues do not exhibit the same change in magnitude upon inhibitor binding. Residues in certain areas of the protein are affected significantly whereas residues in other areas are not affected at all. In particular, inhibitor binding has a significant effect on those regions that define the binding site, especially the flap region which becomes structurally stable as a result of the additional binding free energy. The induced stabilization propagates to regions not in direct contact with the inhibitor, particularly to the strand between residues Pro9 and Ala22 and the helix between Arg87 and Gly94. On the other hand, the stability of the strand between Asp60 and Leu76 is not significantly affected by inhibitor binding. The structural distribution of binding effects define cooperative pathways within the protease molecule. Proteins 1999;36:147-156.     

Synthesis and activity of tetrapeptidic HTLV-I protease inhibitors possessing different P3-cap moieties

The causative agent behind adult T-cell leukemia and tropical spastic paraparesis/HTLV-I-associated myelopathy is the human T-cell leukemia virus type 1 (HTLV-I). Tetrapeptidic HTLV-I protease inhibitors were designed on a previously reported potent inhibitor KNI-10516, with modifications at the P(3)-cap moieties. All the inhibitors showed high HIV-1 protease inhibitory activity (over 98% inhibition at 50nM) and most exhibited highly potent inhibition against HTLV-I protease (IC(50) values were less than 100nM).