Dissection of chilling requirement and bloom date QTLs in peach using a whole genome sequencing of sibling trees from an F2 mapping population

Chilling requirement (CR) for floral bud dormancy release is one of the major limiting factors for geographical adaptation of fruiting trees. Using a whole genome sequencing approach (Illumina platform), we explored polymorphism underlying phenotypic differences among individuals in a peach F₂ cross segregating for chilling requirement and bloom date. Allelic configuration of individuals, which represented phenotypic extremes in the cross (300 vs. 1,100 chill hours) allowed reconstruction of low- and high-chill haplotypes within three most significant quantitative trait locus (QTL) intervals on the Prunus G1, G4, and G7. We detected single nucleotide polymorphic sites (SNPs), small deletions and insertions (DIPs), and large structural variants (SVs) associated with low-chill haplotypes and created a prioritized list of candidate genes based on functionally characterized homologs from Arabidopsis thaliana. Two dormancy associated genes PpeDAM5 and PpeDAM6 are the strongest candidate genes for the major QTL signal at the lower end of G1. Also, key functional genes involved in the Polycomb repressive mechanism, cell cycle progression, and hormone regulation were evident as strong candidate genes underlying QTL intervals in this peach cross.     

Meta-analysis of QTL involved in silage quality of maize and comparison with the position of candidate genes

A meta-analysis of quantitative trait loci (QTL) associated with plant digestibility and cell wall composition in maize was carried out using results from 11 different mapping experiments. Statistical methods implemented in “MetaQTL” software were used to build a consensus map, project QTL positions and perform meta-analysis. Fifty-nine QTL for traits associated with digestibility and 150 QTL for traits associated with cell wall composition were included in the analysis. We identified 26 and 42 metaQTL for digestibility and cell wall composition traits, respectively. Fifteen metaQTL with confidence interval (CI) smaller than 10 cM were identified. As expected from trait correlations, 42% of metaQTL for digestibility displayed overlapping CIs with metaQTL for cell wall composition traits. Coincidences were particularly strong on chromosomes 1 and 3. In a second step, 356 genes selected from the MAIZEWALL database as candidates for the cell wall biosynthesis pathway were positioned on our consensus map. Colocalizations between candidate genes and metaQTL positions appeared globally significant based on χ² tests. This study contributed in identifying key chromosomal regions involved in silage quality and potentially associated genes for most of these regions. These genes deserve further investigation, in particular through association mapping.     

Recalculation of 23 mouse HDL QTL datasets improves accuracy and allows for better candidate gene analysis

In the past 15 years, the quantitative trait locus (QTL) mapping approach has been applied to crosses between different inbred mouse strains to identify genetic loci associated with plasma HDL cholesterol levels. Although successful, a disadvantage of this method is low mapping resolution, as often several hundred candidate genes fall within the confidence interval for each locus. Methods have been developed to narrow these loci by combining the data from the different crosses, but they rely on the accurate mapping of the QTL and the treatment of the data in a consistent manner. We collected 23 raw datasets used for the mapping of previously published HDL QTL and reanalyzed the data from each cross using a consistent method and the latest mouse genetic map. By utilizing this approach, we identified novel QTL and QTL that were mapped to the wrong part of chromosomes. Our new HDL QTL map allows for reliable combining of QTL data and candidate gene analysis, which we demonstrate by identifying Grin3a and Etv6, as candidate genes for QTL on chromosomes 4 and 6, respectively. In addition, we were able to narrow a QTL on Chr 19 to five candidates.     

A Genome-Wide Association Study of the Maize Hypersensitive Defense Response Identifies Genes That Cluster in Related Pathways

Much remains unknown of molecular events controlling the plant hypersensitive defense response (HR), a rapid localized cell death that limits pathogen spread and is mediated by resistance (R-) genes. Genetic control of the HR is hard to quantify due to its microscopic and rapid nature. Natural modifiers of the ectopic HR phenotype induced by an aberrant auto-active R-gene (Rp1-D21), were mapped in a population of 3,381 recombinant inbred lines from the maize nested association mapping population. Joint linkage analysis was conducted to identify 32 additive but no epistatic quantitative trait loci (QTL) using a linkage map based on more than 7000 single nucleotide polymorphisms (SNPs). Genome-wide association (GWA) analysis of 26.5 million SNPs was conducted after adjusting for background QTL. GWA identified associated SNPs that colocalized with 44 candidate genes. Thirty-six of these genes colocalized within 23 of the 32 QTL identified by joint linkage analysis. The candidate genes included genes predicted to be in involved programmed cell death, defense response, ubiquitination, redox homeostasis, autophagy, calcium signalling, lignin biosynthesis and cell wall modification. Twelve of the candidate genes showed significant differential expression between isogenic lines differing for the presence of Rp1-D21. Low but significant correlations between HR-related traits and several previously-measured disease resistance traits suggested that the genetic control of these traits was substantially, though not entirely, independent. This study provides the first system-wide analysis of natural variation that modulates the HR response in plants.     

Quantitative trait analysis of the development of pulmonary tolerance to inhaled zinc oxide in mice

Background

Individuals may develop tolerance to the induction of adverse pulmonary effects following repeated exposures to inhaled toxicants. Previously, we demonstrated that genetic background plays an important role in the development of pulmonary tolerance to inhaled zinc oxide (ZnO) in inbred mouse strains, as assessed by polymorphonuclear leukocytes (PMNs), macrophages, and total protein in bronchoalveolar lavage (BAL) phenotypes. The BALB/cByJ (CBy) and DBA/2J (D2) strains were identified as tolerant and non-tolerant, respectively. The present study was designed to identify candidate genes that control the development of pulmonary tolerance to inhaled ZnO.

Methods

Genome-wide linkage analyses were performed on a CByD2F2 mouse cohort phenotyped for BAL protein, PMNs, and macrophages following 5 consecutive days of exposure to 1.0 mg/m³ inhaled ZnO for 3 hours/day. A haplotype analysis was carried out to determine the contribution of each quantitative trait locus (QTL) and QTL combination to the overall BAL protein phenotype. Candidate genes were identified within each QTL interval using the positional candidate gene approach.

Results

A significant quantitative trait locus (QTL) on chromosome 1, as well as suggestive QTLs on chromosomes 4 and 5, for the BAL protein phenotype, was established. Suggestive QTLs for the BAL PMN and macrophage phenotypes were also identified on chromosomes 1 and 5, respectively. Analysis of specific haplotypes supports the combined effect of three QTLs in the overall protein phenotype. Toll-like receptor 5 (Tlr5) was identified as an interesting candidate gene within the significant QTL for BAL protein on chromosome 1. Wild-derived Tlr5-mutant MOLF/Ei mice were tolerant to BAL protein following repeated ZnO exposure.

Conclusion

Genetic background is an important influence in the acquisition of pulmonary tolerance to BAL protein, PMNs, and macrophages following ZnO exposure. Promising candidate genes exist within the identified QTL intervals that would be good targets for additional studies, including Tlr5. The implications of tolerance to health risks in humans are numerous, and this study furthers the understanding of gene-environment interactions that are likely to be important factors from person-to-person in regulating the development of pulmonary tolerance to inhaled toxicants.     

Combined genetic and physiological analysis of a locus contributing to quantitative variation

The natural variation of many traits is controlled by multiple genes, individually referred to as quantitative trait loci (QTL), that interact with the environment to determine the ultimate phenotype of any individual. A QTL has yet to be described molecularly, in part because strategies to systematically identify them are underdeveloped and because the subtle nature of QTLs prevents the application of standard methods of gene identification. Therefore, it will be necessary to develop a systematic approach(es) for the identification of QTLs based upon the numerous positional data now being accumulated through molecular marker analyses. We have characterized a QTL by the following three-step approach: (1) identification of a QTL in complex populations, (2) isolation and genetic mapping of this QTL in near-isogenic lines, and (3) identification of a candidate gene using map position and physiological criteria. Using this approach we have characterized a plant height QTL in maize that maps to chromosome 9 near the centromere. Both map position and physiological criteria suggest the gibberillin biosynthesis gene dwarf3 as a candidate gene for this QTL.     

Identification of enzymatic and regulatory genes of plant metabolism through QTL analysis in Arabidopsis

The biochemical diversity in the plant kingdom is estimated to well exceed 100,000 distinct compounds (Weckwerth, 2003) and 4000 to 20,000 metabolites per species seem likely (Fernie et al., 2004). In recent years extensive progress has been made towards the identification of enzymes and regulatory genes working in a complex network to generate this large arsenal of metabolites. Genetic loci influencing quantitative traits, e.g. metabolites or biomass, may be mapped to associated molecular markers, a method called quantitative trait locus mapping (QTL mapping), which may facilitate the identification of novel genes in biochemical pathways. Arabidopsis thaliana, as a model organism for seed plants, is a suitable target for metabolic QTL (mQTL) studies due to the availability of highly developed molecular and genetic tools, and the extensive knowledge accumulated on the metabolite profile. While intensely studied, in particular since the availability of its complete sequence, the genome of Arabidopsis still comprises a large proportion of genes with only tentative function based on sequence homology. From a total number of 33,518 genes currently listed (TAIR 9, http://www.arabidopsis.org), only about 25% have direct experimental evidence for their molecular function and biological process, while for more than 30% no biological data are available. Modern metabolomics approaches together with continually extended genomic resources will facilitate the task of assigning functions to those genes. In our previous study we reported on the identification of mQTL (Lisec et al., 2008). In this paper, we summarize the current status of mQTL analyses and causal gene identification in Arabidopsis and present evidence that a candidate gene located within the confidence interval of a fumarate mQTL (AT5G50950) encoding a putative fumarase is likely to be the causal gene of this QTL. The total number of genes molecularly identified based on mQTL studies is still limited, but the advent of multi-parallel analysis techniques for measurement of gene expression, as well as protein and metabolite abundances and for rapid gene identification will assist in the important task of assigning enzymes and regulatory genes to the growing network of known metabolic reactions.     

Genome wide QTL mapping to identify candidate genes for carcass traits in Hanwoo (Korean Cattle)

Meat quality traits are the most economically important traits affecting the beef industry in Korea. We performed a whole genome quantitative trait locus (QTL) mapping study of carcass data in Hanwoo Korean cattle. Two hundred sixty-six Hanwoo steers from 65 sires were genotyped using a 10K Affymetrix SNP chip. The average SNP interval across the bovine genome was 1.5Mb. Associations between each individual SNP and four carcass traits [carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling (MAR)] were assessed using a linear mixed model of each trait. Combined linkage and linkage disequilibrium analysis (LDLA) detected six potential QTL on BTA04, 06, 13, 16, 17, and 23 at the chromosome-wise level (P<0.05). Two MAR QTL were detected at 52.2 cM of BTA06 and 46.04 cM of BTA17. We identified three genes (ARAP2, LOC539460, and LOC511424) in the QTL region of BTA06 and seven genes (RPS14, SCARB1, LOC782103, BRI3BP, AACS, DHX37, and UBC) in the QTL region of BTA17. One significant QTL for CWT was detected at 100 cM on BTA04 and the corresponding QTL region spanned 1.7 cM from 99.7 to 101.4 cM. For EMA QTL, one significant QTL was detected at 3.9 cM of BTA23 and the most likely QTL interval was 1.4 cM, placing 15 candidate genes in the marker bracket. Finally, two QTL for BFT were identified at 68 cM on BTA13 and 24 cM on BTA16. The LPIN3 gene, which is functionally associated with lipodystrophy in humans, is located in the BFT QTL on BTA13. Thus, two potential candidate genes, acetoacetyl-CoA synthetase (AACS) and lipin (LPIN), were detected in QTL regions on BTA17 for MAR and BTA13 for BFT, respectively. In conclusion, LDLA analysis can be used to detect chromosome regions harboring QTL and candidate genes with a low density SNP panel, yielding relatively narrow confidence intervals regarding location.     

Detection of selection signatures within candidate regions underlying trypanotolerance in outbred cattle populations

Breeding indigenous African taurine cattle tolerant to trypanosomosis is a straightforward approach to control costs generated by this disease. A recent study identified quantitative trait loci (QTL) underlying trypanotolerance traits in experimental crosses between tolerant N'Dama and susceptible Boran zebu cattle. As trypanotolerance is thought to result from local adaptation of indigenous cattle breeds, we propose an alternative and complementary approach to study the genetic architecture of this trait, based on the identification of selection signatures within QTL or candidate genes. A panel of 92 microsatellite markers was genotyped on 509 cattle belonging to four West African trypanotolerant taurine breeds and 10 trypanosusceptible European or African cattle breeds. Some of these markers were located within previously identified QTL regions or candidate genes, while others were chosen in regions assumed to be neutral. A detailed analysis of the genetic structure of these different breeds was carried out to confirm a priori grouping of populations based on previous data. Tests based on the comparison of the observed heterozygosities and variances in microsatellite allelic size among trypanotolerant and trypanosusceptible breeds led to the identification of two significantly less variable microsatellite markers. BM4440, one of these two outlier loci, is located within the confidence interval of a previously described QTL underlying a trypanotolerance-related trait.
Detection of selection signatures appears to be a straightforward approach for unravelling the molecular determinism of trypanosomosis pathogenesis. We expect that a whole genome approach will help confirm these results and achieve a higher resolving power.     

Quantitative Trait Locus Mapping and Candidate Gene Analysis for Plant Architecture Traits Using Whole Genome Re-Sequencing in Rice

Plant breeders have focused on improving plant architecture as an effective means to increase crop yield. Here, we identify the main-effect quantitative trait loci (QTLs) for plant shape-related traits in rice (Oryza sativa) and find candidate genes by applying whole genome re-sequencing of two parental cultivars using next-generation sequencing. To identify QTLs influencing plant shape, we analyzed six traits: plant height, tiller number, panicle diameter, panicle length, flag leaf length, and flag leaf width. We performed QTL analysis with 178 F₇ recombinant in-bred lines (RILs) from a cross of japonica rice line ‘SNUSG1’ and indica rice line ‘Milyang23’. Using 131 molecular markers, including 28 insertion/deletion markers, we identified 11 main- and 16 minor-effect QTLs for the six traits with a threshold LOD value > 2.8. Our sequence analysis identified fifty-four candidate genes for the main-effect QTLs. By further comparison of coding sequences and meta-expression profiles between japonica and indica rice varieties, we finally chose 15 strong candidate genes for the 11 main-effect QTLs. Our study shows that the whole-genome sequence data substantially enhanced the efficiency of polymorphic marker development for QTL fine-mapping and the identification of possible candidate genes. This yields useful genetic resources for breeding high-yielding rice cultivars with improved plant architecture.     

High-resolution mapping of genes involved in plant stage-specific partial resistance of barley to leaf rust

Partial resistance quantitative trait loci (QTLs) Rphq11 and rphq16 against Puccinia hordei isolate 1.2.1 were previously mapped in seedlings of the mapping populations Steptoe/Morex and Oregon Wolfe Barleys, respectively. In this study, QTL mapping was performed at adult plant stage for the two mapping populations challenged with the same rust isolate. The results suggest that Rphq11 and rphq16 are effective only at seedling stage, and not at adult plant stage. The cloning of several genes responsible for partial resistance of barley to P. hordei will allow elucidation of the molecular basis of this type of plant defence. A map-based cloning approach requires to fine-map the QTL in a narrow genetic window. In this study, Rphq11 and rphq16 were fine-mapped using an approach aiming at speeding up the development of plant material and simplifying its evaluation. The plant materials for fine-mapping were identified from early plant materials developed to produce QTL-NILs. The material was first selected to carry the targeted QTL in heterozygous condition and susceptibility alleles at other resistance QTLs in homozygous condition. This strategy took four to five generations to obtain fixed QTL recombinants (i.e., homozygous resistant at the Rphq11 or rphq16 QTL alleles, homozygous susceptible at the non-targeted QTL alleles). In less than 2 years, Rphq11 was fine-mapped into a 0.2-cM genetic interval and a 1.4-cM genetic interval for rphq16. The strongest candidate gene for Rphq11 is a phospholipid hydroperoxide glutathione peroxidase. Thus far, no candidate gene was identified for rphq16.     

QTL mapping of potato chip color and tuber traits within an autotetraploid family

Cultivated potato (Solanum tuberosum L.) is a highly heterozygous autotetraploid crop species, and this creates challenges for traditional line development and molecular breeding. Recent availability of a single-nucleotide polymorphism (SNP) array with 8303 features and software packages for linkage and association mapping in autotetraploid species present new opportunities for the identification of genomic regions that contribute to high-value traits in cultivated potato. A biparental tetraploid potato population was evaluated across three field seasons and storage trials in order to identify quantitative trait loci (QTL) for multiple tuber traits including fried chip color after 5.5–7.2 °C storage. Tetra-allelic dosage information was used to construct a genetic linkage map that covered 1041 cM and contained 2095 SNP markers with a median marker interval of 0.4 cM. A total of 41 QTL were identified for flower color, tuber yield, tuber number per plant, tuber weight, tuber size, and chip color after various storage regimes. Moderate effect QTL for chip color at 3 months were identified that co-localized with candidate genes vacuolar invertase (VInv), invertase inhibitor (INH2), and apoplastic invertase (Inv _ap -b). A separate QTL for chip color after 6 months of storage was identified in the short arm of chromosome 2, and this locus may contribute to variation in senescent sweetening resistance. QTL for tuber weight, length, and width co-localized with a known QTL for plant maturity on chromosome 5. Genome-wide association mapping using a polyploid model detected the tuber size QTL and identified a number of candidate SNPs, but was unable to detect markers significantly associated with chip color.     

Analysis of genetic factors that control shoot mineral concentrations in rapeseed (Brassica napus) in different boron environments

Mineral nutrients are essential for plant cell function, and understanding the genetic and physiological basis of mineral concentration is therefore important for the development of nutrient-efficient crop varieties that can cope with a shortage of mineral resources. In the present study, we investigated the profiles of B, Ca, Fe, Cu, Mg, P and Zn concentrations in shoots and analyzed the genetic variation in a rapeseed (Brassica napus) double haploid population at normal and deficient boron (B) levels in hydroponic conditions. Significant correlations between the concentrations of different minerals, such as Ca and Mg, Ca and P, and Cu and Fe, existed in both B environments. A total of 35 quantitative trait loci (QTL) and 74 epistatic interaction pairs for mineral concentrations were identified by whole genome analysis of QTL and epistatic interactions. The individual phenotypic contributions of the QTL ranged from 4.4% to 19.0%, and the total percentage of genetic variance that was due to QTL and epistatic interactions varied from 10.4% to 82.4%. Most of these QTL corresponded specifically to one of the two B conditions except for one stable main-effect P-QTL across the B environments. Three QTL for Ca and Mg were found to co-localize under normal B condition. These results revealed that genetic factors control mineral homeostasis in plants and multigenes involving ion transport are required to regulate mineral balance in plants under conditions of diverse nutrient stress. In addition, 26 genes involved in ion uptake and transport in Arabidopsis thaliana were in silico mapped onto the QTL intervals of B. napus by comparative genomic analysis. These candidate orthologous genes in B. napus allowed the selection of genes involved in the controlling mineral concentration that may account for the identified QTL.     

Comparative genetic analysis of a wheat seed dormancy QTL with rice and <Emphasis Type="Italic">Brachypodium</Emphasis> identifies candidate genes for ABA perception and calcium signaling

Wheat preharvest sprouting (PHS) occurs when seed germinates on the plant before harvest resulting in reduced grain quality. In wheat, PHS susceptibility is correlated with low levels of seed dormancy. A previous mapping of quantitative trait loci (QTL) revealed a major PHS/seed dormancy QTL, QPhs.cnl-2B.1, located on wheat chromosome 2B. A comparative genetic study with the related grass species rice (Oryza sativa L.) and Brachypodium distachyon at the homologous region to the QPhs.cnl-2B.1 interval was used to identify the candidate genes for marker development and subsequent fine mapping. Expressed sequence tags and a comparative mapping were used to design 278 primer pairs, of which 22 produced polymorphic amplicons that mapped to the group 2 chromosomes. Fourteen mapped to chromosome 2B, and ten were located in the QTL interval. A comparative analysis revealed good macrocollinearity between the PHS interval and 3 million base pair (mb) region on rice chromosomes 7 and 3, and a 2.7-mb region on Brachypodium Bd1. The comparative intervals in rice were found to contain three previously identified rice seed dormancy QTL. Further analyses of the interval in rice identified genes that are known to play a role in seed dormancy, including a homologue for the putative Arabidopsis ABA receptor ABAR/GUN5. Additional candidate genes involved in calcium signaling were identified and were placed in a functional protein association network that includes additional proteins critical for ABA signaling and germination. This study provides promising candidate genes for seed dormancy in both wheat and rice as well as excellent molecular markers for further comparative and fine mapping.     

A directed search around caprine candidate loci provided evidence for microsatellites linkage to growth and cashmere yield in Rayini goats

Four genomic regions located on goat chromosomes 1, 2, 5 and 13 previously reported as significant DNA regions harboring quantitative trait loci (QTL) for growth and fleece traits in goat were considered as candidate genomic regions. The objective of conducting this study was to determine whether there is evidence for association of growth traits and cashmere yield in native Iranian Rayini goats with markers flanking these candidate regions. One hundred and twenty kids from 6 Rayini bucks (20 half-sib offspring per buck) were used in the present study. The six bucks and their offspring were genotyped for eight microsatellite markers flanking the candidate intervals. Body weights recorded on the kids were birth weight (BW0), weaning weight (BW3) and weight at 6 months of age (BW6). Average daily gains from birth to weaning and weaning to 6 months of age were computed based on the values obtained for BW0, BW3 and BW6. Cashmere yield was also recorded for the kids at the first, second and third year of age. QTL analysis in the candidate intervals was conducted using the least squared regression interval mapping approach. Linkage analysis indicated significant QTL for growth traits on goat chromosomes 1, 2 and 5 (chromosome-wide significance of P < 0.01). Three of the candidate regions located on chromosomes 2, 5 and 13 were linked to cashmere yield. QTL effect ranged from 0.8 to 4.3 in units of residual standard deviation for different traits and families.     

玉米叶形相关性状的Meta-QTL及候选基因分析

叶长、叶宽、叶面积及叶夹角不仅影响玉米(Zea mays)光合效率, 也是株型的重要构成因素。通过对620个叶形QTL进行整合, 构建不同遗传背景下的叶形QTL整合图谱, 利用元分析发掘出22个叶长、22个叶宽、12个叶面积以及17个叶夹角mQTL; 进一步运用生物信息学手段, 确定44个与叶片发育密切相关的候选基因。分析发现, 仅有NAL7-like、YABBY6- like和GRF2等13个基因位于mQTL区间内, 而玉米中已克隆的KNOTTED1、AN3/GIF1、rgd1/lbl1、mwp1及SRL2-like、HYL1-like和CYCB2;4-like等水稻(Oryza sativa)和拟南芥(Arabidopsis thaliana)叶形同源基因位于未被整合的QTL内; 对44个候选基因在叶片长、宽、厚发育过程中基部-末端、中央-边缘、远轴-近轴的调控机理进行归纳分析, 发现玉米中仅有少数几个候选基因被报道, 揭示了叶形发育的部分分子机理。因此, 对玉米叶形相关mQTL/QTL及基因进行全面深入的分析, 不仅有助于增加对其遗传结构的了解, 发掘更多候选基因, 阐明叶形发育和形成的分子机制, 还可为耐密理想株型的分子标记辅助选择提供依据。