Role of remote scaffolding residues in the inhibitory loop pre-organization, flexibility, rigidification and enzyme inhibition of serine protease inhibitors

Canonical serine protease inhibitors interact with cognate enzymes through the P3-P2' region of the inhibitory loop while its scaffold hardly makes any contact. Neighboring scaffolding residues like Arginines or Asparagine shape-up the inhibitory loop and favor the resynthesis of cleaved scissile bond. However, role of remote scaffolding residues, which are not involved in religation, was not properly explored. Crystal structures of two engineered winged bean chymotrypsin inhibitor (WCI) complexed with Bovine trypsin (BPT) namely L65R-WCI:BPT and F64Y/L65R-WCI:BPT show that the inhibitory loop of these engineered inhibitors are recognized and rigidified properly at the enzyme active site like other strong trypsin inhibitors. Chimeric protein ETI(L)-WCI(S), having a loop of Erythrina caffra Trypsin Inhibitor, ETI on the scaffold of WCI, was previously shown to behave like substrate. Non-canonical structure of the inhibitory loop and its flexibility are attributed to the presence of smaller scaffolding residues which cannot act as barrier to the inhibitory loop like in ETI. Double mutant A76R/L115Y-(ETI(L)-WCI(S)), where the barrier is reintroduced on ETI(L)-WCI(S), shows regaining of inhibitory activity. The structure of A76R/L115Y-(ETI(L)-WCI(S)) along with L65R-WCI:BPT and F64Y/L65R-WCI:BPT demonstrate here that the lost canonical conformation of the inhibitory loop is fully restored and loop flexibility is dramatically reduced. Therefore, residues at the inhibitory loop interact with the enzyme playing the primary role in recognition and binding but scaffolding residues having no direct interaction with the enzyme are crucial for rigidification event and the inhibitory potency. B-factor analysis indicates that the amount of inhibitory loop rigidification varies between different inhibitor families.     

Single mutation at P1 of a chymotrypsin inhibitor changes it to a trypsin inhibitor: X-ray structural (2.15 Å) and biochemical basis

Change in specificity, caused by the mutations at P1 site, of the serine protease inhibitors of different families is reported in the literature, but Kunitz (STI) family inhibitors are almost unexplored in this regard. In this paper, we present the crystal structure of a P1 variant of winged bean chymotrypsin inhibitor (WCI) belonging to Kunitz (STI) family, supplemented by biochemical, phylogenetic and docking studies on the mutant. A single mutation (Leu → Arg) at P1 converted WCI to a strong inhibitor of trypsin with an association constant of 4.8 × 10¹⁰ M^?1 which is comparable to other potent trypsin inhibitors of the family. The crystal structure (2.15 Å) of this mutant (L65R) shows that its reactive site loop conformation deviates from that of WCI and adopts a structure similar to that of Erythrina caffra trypsin inhibitor (ETI) belonging to the same family. Mutation induced structural changes have also been propagated in a concerted manner to the neighboring conserved scaffolding residue Asn14, such that the side chain of this residue took an orientation similar to that of ETI and optimized the hydrogen bonds with the loop residues. While docking studies provide information about the accommodation of non-specific residues in the active site groove of trypsin, the basis of the directional alteration of the reactive site loop conformation has been understood through sequence analysis and related phylogenetic studies.     

Spacer Asn determines the fate of Kunitz (STI) inhibitors, as revealed by structural and biochemical studies on WCI mutants

The scaffold of serine protease inhibitors plays a significant role in the process of religation which resists proteolysis of the inhibitor in comparison to a substrate. Although the role of the conserved scaffolding Asn residue was previously implicated in the maintenance of the binding loop conformation of Kunitz (STI) inhibitors, its possible involvement in the prevention of proteolysis is still unexplored. In this paper, we have investigated the specific role of the spacer Asn in the prevention of proteolysis through structural and biochemical studies on the mutants where Asn14 of winged bean chymotrypsin inhibitor (WCI) has been replaced by Gly, Ala, Thr, Leu, and Gln. A residue having no side chain or beta-branching at the 14th position creates deformation and insufficient protrusion of the binding loop, and as a result N14G and N14T lose the ability to recognize proteases. Although the reactive site loop conformation of N14A and N14Q are almost identical to WCI, biochemical results present N14A as a substrate indicating that the methyl group of Ala14 is not suitable to capture the cleaved parts together for religation. The poor inhibitory power of N14L points toward the chemical incompatibility of Leu at the 14th position, although its size is the same as Asn; on the other hand, slight loss of inhibitory potency of N14Q is attributed to the inappropriate placement of the Gln14 polar head, caused by the strained accommodation of its bigger side chain. These observations collectively allow us to conclude that the side chain of spacer Asn fits snugly into the concave space of the reactive site loop cavity and its ND2 atom forms hydrogen bonds with the P2 and P1' carbonyl O at either side of the scissile bond holding the cleaved products together for religation. Through database analysis, we have identified such spacer asparagines in five other families of serine protease inhibitors with a similar disposition of their ND2 atoms, which supports our proposition.     

The role of Asn14 in the stability and conformation of the reactive-site loop of winged bean chymotrypsin inhibitor: crystal structures of two point mutants Asn14-->Lys and Asn14-->Asp.

A double-headed chymotrypsin inhibitor, WCI, from winged bean seeds was cloned for structural and biochemical studies. The inhibitor was subjected to two point mutations at a conserved position, Asn14. This residue, known to have a pivotal role in stabilizing the first reactive-site loop (Gln63-Phe68) of the inhibitor, is highly conserved in the sequences of the other members of Kunitz (STI) family as well as in the sequences of Kazal family of serine protease inhibitors. The mutants, N14K and N14D, were subjected to biochemical assay and their characteristics were compared with those of the recombinant inhibitor (rWCI). Crystallographic studies of the recombinant and the mutant proteins are discussed. These studies were primarily aimed at understanding the importance of the protein scaffolding towards the conformational rigidity of the reactive-site loop. Our analysis reveals that, as the Lys14 side chain takes an unusual fold in N14K and the Asp14 side chain in N14D interacts with the loop residues by water-mediated hydrogen bonds, the canonical conformation of the loop has remained effectively intact in both the mutant structures. However, minor alterations such as a 2-fold increase in the inhibitory affinity towards the cognate enzyme were observed.     

Complementation of intramolecular interactions for structural–functional stability of plant serine proteinase inhibitors

Background

Plant protease inhibitors (PIs) constitute a diverse group of proteins capable of inhibiting proteases. Among PIs, serine PIs (SPIs) display stability and conformational restrictions of the reactive site loop by virtue of their compact size, and by the presence of disulfide bonds, hydrogen bonds, and other weak interactions.

Scope of review

The significance of various intramolecular interactions contributing to protein folding mechanism and their role in overall stability and activity of SPIs is discussed here. Furthermore, we have reviewed the effect of variation or manipulation of these interactions on the activity/stability of SPIs.

Major conclusions

The selective gain or loss of disulfide bond(s) in SPIs can be associated with their functional differentiation, which is likely to be compensated by non-covalent interactions (hydrogen bonding or electrostatic interactions). Thus, these intramolecular interactions are collectively responsible for the functional activity of SPIs, through the maintenance of scaffold framework, conformational rigidity and shape complementarities of reactive site loop.

General significance

Structural insight of these interactions will provide an in-depth understanding of kinetic and thermodynamic parameters involved in the folding and stability mechanisms of SPIs. These features can be explored for engineering canonical SPIs for optimizing their overall stability and functionality for various applications.     

Structural insights into the unique inhibitory mechanism of Kunitz type trypsin inhibitor from Cicer arietinum L.

Kunitz-type trypsin inhibitors bind to the active pocket of trypsin causing its inhibition. Plant Kunitz-type inhibitors are thought to be important in defense, especially against insect pests. From sequence analysis of various Kunitz-type inhibitors from plants, we identified CaTI2 from chickpea as a unique variant lacking the functionally important arginine residue corresponding to the soybean trypsin inhibitor (STI) and having a distinct and unique inhibitory loop organization. To further explore the implications of these sequence variations, we obtained the crystal structure of recombinant CaTI2 at 2.8Å resolution. It is evident from the structure that the variations in the inhibitory loop facilitates non-substrate like binding of CaTI2 to trypsin, while the canonical inhibitor STI binds to trypsin in substrate like manner. Our results establish the unique mechanism of trypsin inhibition by CaTI2, which warrant further research into its substrate spectrum. Abbreviations BApNA Nα-Benzoyl-L-arginine 4-nitroanilide

BPT bovine pancreatic trypsin

CaTI2 Cicer arietinum L trypsin inhibitor 2

DrTI Delonix regia Trypsin inhibitor

EcTI Enterolobium contortisiliquum trypsin inhibitor

ETI Erythrina caffra trypsin inhibitor

KTI Kunitz type inhibitor

STI soybean trypsin inhibitor

TKI Tamarindus indica Kunitz inhibitor

Communicated By Ramaswamy H. Sarma     

In silico mutations and molecular dynamics studies on a winged bean chymotrypsin inhibitor protein

Winged bean chymotrypsin inhibitor (WCI) has an intruding residue Asn14 that plays a crucial role in stabilizing the reactive site loop conformation. This residue is found to be conserved in the Kunitz (STI) family of serine protease inhibitors. To understand the contribution of this scaffolding residue on the stability of the reactive site loop, it was mutated in silico to Gly, Ala, Ser, Thr, Leu and Val and molecular dynamics (MD) simulations were carried out on the mutants. The results of MD simulations reveal the conformational variability and range of motions possible for the reactive site loop of different mutants. The N-terminus side of the scissile bond, which is close to a beta-barrel, is conformationally less variable, while the C-terminus side, which is relatively far from any such secondary structural element, is more variable and needs stability through hydrogen-bonding interactions. The simulated structures of WCI and the mutants were docked in the peptide-binding groove of the cognate enzyme chymotrypsin and the ability to form standard hydrogen-bonding interactions at P3, P1 and P2' residues were compared. The results of the MD simulations coupled with docking studies indicate that hydrophobic residues like Leu and Val at the 14th position are disruptive for the integrity of the reactive site loop, whereas a residue like Thr, which can stabilize the C-terminus side of the scissile bond, can be predicted at this position. However, the size and charge of the Asn residue made it most suitable for the best maintenance of the integrity of the reactive site loop, explaining its conserved nature in the family.     

Coevolution of Antibody Stability and Vκ CDR-L3 Canonical Structure

Antibodies recognize antigens through six hypervariable loops, five of which have a limited set of conformations known as canonical structures. For κ light chains, the majority of CDR-L3 [the third hypervariable loop of the light chain variable domain (V_L)] adopts the type 1 canonical structure (CS1), with a cis-proline at position 95. Here, we present the design and structural studies of the monoclonal antibody mAb15 and related mutants that contained a series of progressively germline mutations only in the heavy chain variable domain (V_H) that ultimately led to an increase of more than 11 °C in the melting temperature (T_m) of the antigen-binding fragment (Fab). The all-trans CDR-L3 structure in the wild type is significantly different from any known CDR-L3 canonical structures. In the thermally stable mutants, the L94^L-S95^L peptide bond adopts an energetically unfavorable non-X-proline cis conformation, but the overall CDR-L3 loop converted to CS1. The stabilized V_H appears to function as a specific molecular chaperone that facilitated the trans-cis isomerization of S95^L. Thus, it is plausible that proline is the evolutionary choice to maintain overall structure and stability for V_L. These results provide new insights into the evolution of CS1 and suggest a potential molecular switch mechanism at position 95 that links CDR-L3 structural diversity and antibody stability and will have implications for antibody engineering.     

Bh3 induced conformational changes in Bcl‐Xl revealed by crystal structure and comparative analysis

Apoptosis or programmed cell death is a regulatory process in cells in response to stimuli perturbing physiological conditions. The Bcl‐2 family of proteins plays an important role in regulating homeostasis during apoptosis. In the process, the molecular interactions among the three members of this family, the pro‐apoptotic, anti‐apoptotic and BH3‐only proteins at the mitochondrial outer membrane define the fate of a cell. Here, we report the crystal structures of the human anti‐apoptotic protein Bcl‐X_L in complex with BH3‐only BID^BH3 and BIM^BH3 peptides determined at 2.0 Å and 1.5 Å resolution, respectively. The BH3 peptides bind to the canonical hydrophobic pocket in Bcl‐X_L and adopt an alpha helical conformation in the bound form. Despite a similar structural fold, a comparison with other BH3 complexes revealed structural differences due to their sequence variations. In the Bcl‐X_L‐BID^BH3 complex we observed a large pocket, in comparison with other BH3 complexes, lined by residues from helices α1, α2, α3, and α5 located adjacent to the canonical hydrophobic pocket. These results suggest that there are differences in the mode of interactions by the BH3 peptides that may translate into functional differences in apoptotic regulation. Proteins 2015; 83:1262–1272. © 2015 Wiley Periodicals, Inc.     

Factors affecting redox potential and differential sensitivity of SoxR to redox‐active compounds

SoxR is a [2Fe‐2S]‐containing sensor‐regulator, which is activated through oxidation by redox‐active compounds (RACs). SoxRs show differential sensitivity to RACs, partly due to different redox potentials, such that Escherichia coli (Ec) SoxR with lower potential respond to broader range of RACs than Streptomyces coelicolor (Sc) SoxR. In S. coelicolor, the RACs that do not activate ScSoxR did not inhibit growth, suggesting that ScSoxR is tuned to respond to growth‐inhibitory RACs. Based on sequence comparison and mutation studies, two critical amino acids around the [2Fe‐2S] binding site were proposed as key determinants of sensitivity. ScSoxR‐like mutation (R127L/P131V) in EcSoxR changed its sensitivity profile as ScSoxR, whereas EcSoxR‐like mutation (L126R/V130P) in ScSoxR caused relaxed response. In accordance, the redox potentials of EcSoxR^R127L/P131V and ScSoxR^L126R/V130P were estimated to be ?192 ± 8 mV and ?273 ± 10 mV, respectively, approaching that of ScSoxR (?185 mV) and EcSoxR (?290 mV). Molecular dynamics simulations revealed that the R127L and P131V substitutions in EcSoxR caused more electropositive environment around [2Fe‐2S], making it harder to get oxidized. This reveals a mechanism to modulate redox‐potential in [Fe‐S]‐containing sensors by point mutations and to evolve a sensor with differential sensitivity to achieve optimal cellular physiology.     

Directed Evolution of Canonical Loops and Their Swapping between Unrelated Serine Proteinase Inhibitors Disprove the Interscaffolding Additivity Model

Reversible serine proteinase inhibitors comprise 18 unrelated families. Each family has a distinct representative structure but contains a surface loop that adopts the same, canonical conformation in the enzyme–inhibitor complex. The Laskowski mechanism universally applies for the action of all canonical inhibitors independent of their scaffold, but it has two nontrivial extrapolations. Intrascaffolding additivity states that all enzyme-contacting loop residues act independently of each other, while interscaffolding additivity claims that these residues act independently of the scaffold. These theories have great importance for engineering proteinase inhibitors but have not been comprehensively challenged. Therefore, we tested the interscaffolding additivity theory by hard-randomizing all enzyme-contacting canonical loop positions of a Kazal- and a Pacifastin-scaffold inhibitor, displaying the variants on M13 phage, and selecting the libraries on trypsin and chymotrypsin. Directed evolution delivered different patterns on both scaffolds against both enzymes, which contradicts interscaffolding additivity. To quantitatively assess the extent of non-additivity, we measured the affinities of the optimal binding loop variants and their binding loop-swapped versions. While optimal variants have picomolar affinities, swapping the evolved loops results in up to 200,000-fold affinity loss. To decipher the underlying causes, we characterized the stability, overall structure and dynamics of the inhibitors with differential scanning calorimetry, circular dichroism and NMR spectroscopy and molecular dynamic simulations. These studies revealed that the foreign loop destabilizes the lower-stability Pacifastin scaffold, while the higher-stability Kazal scaffold distorts the foreign loop. Our findings disprove interscaffolding additivity and show that loop and scaffold form one integrated unit that needs to be coevolved to provide high-affinity inhibition.     

The pinholin of lambdoid phage 21: control of lysis by membrane depolarization

The phage 21 holin, S²¹, forms small membrane holes that depolarize the membrane and is designated as a pinholin, as opposed to large-hole-forming holins, like S^λ. Pinholins require secreted SAR endolysins, a pairing that may represent an intermediate in the evolution of canonical holin-endolysin systems.     

Schindleria elongata,a new species of paedomorphic gobioid from the Red Sea (Teleostei: Schindleriidae)

A new species of paedomorphic gobioid, Schindleria elongata, from the Red Sea, is described on the basis of five specimens. The new species is characterized by its lack of body pigmentation; the body depth at pectoral‐fin origin 4–5% of standard length (L_S) and at anal‐fin origin 5–7% L_S; the predorsal length 66–70% L_S; pre‐anal length 66–71% L_S; dorsal‐fin rays 13 or 14; anal‐fin rays 10 or 11; first dorsal‐fin ray at myomere 20 or 21; first anal‐fin ray below second to fourth dorsal‐fin rays; myomeres 19 or 20 + 13 or 14 = 33 or 34 total; premaxillae and dentaries with small teeth; gas bladder located posteriorly at 56–60% L_S; males with a rod‐like, flexible urogenital papilla lacking lobes, projections or accessory papillae, with distal half tapering to a broad, angular point and usually posteriorly directed. A key to the species of Schindleriidae is presented.     

The Skp1‐like protein SSK1 is required for cross‐pollen compatibility in S‐RNase‐based self‐incompatibility

The self‐incompatibility (SI) response occurs widely in flowering plants as a means of preventing self‐fertilization. In these self/non‐self discrimination systems, plant pistils reject self or genetically related pollen. In the Solanaceae, Plantaginaceae and Rosaceae, pistil‐secreted S‐RNases enter the pollen tube and function as cytotoxins to specifically arrest self‐pollen tube growth. Recent studies have revealed that the S‐locus F‐box (SLF) protein controls the pollen expression of SI in these families. However, the precise role of SLF remains largely unknown. Here we report that PhSSK1 (Petunia hybrida SLF‐interacting Skp1‐like1), an equivalent of AhSSK1 of Antirrhinum hispanicum, is expressed specifically in pollen and acts as an adaptor in an SCF(Skp1‐Cullin1‐F‐box)^SLF complex, indicating that this pollen‐specific SSK1‐SLF interaction occurs in both Petunia and Antirrhinum, two species from the Solanaceae and Plantaginaceae, respectively. Substantial reduction of PhSSK1 in pollen reduced cross‐pollen compatibility (CPC) in the S‐RNase‐based SI response, suggesting that the pollen S determinant contributes to inhibiting rather than protecting the S‐RNase activity, at least in solanaceous plants. Furthermore, our results provide an example that a specific Skp1‐like protein other than the known conserved ones can be recruited into a canonical SCF complex as an adaptor.     

Gain‐of‐function mutations cluster in distinct regions associated with the signalling pathway in the PAS domain of the aerotaxis receptor,Aer

The Aer receptor monitors internal energy (redox) levels in Escherichia coli with an FAD‐containing PAS domain. Here, we randomly mutagenized the region encoding residues 14–119 of the PAS domain and found 72 aerotaxis‐defective mutants, 24 of which were gain‐of‐function, signal‐on mutants. The mutations were mapped onto an Aer homology model based on the structure of the PAS–FAD domain in NifL from Azotobacter vinlandii. Signal‐on lesions clustered in the FAD binding pocket, the β‐scaffolding and in the N‐cap loop. We suggest that the signal‐on lesions mimic the ‘signal‐on’ state of the PAS domain, and therefore may be markers for the signal‐in and signal‐out regions of this domain. We propose that the reduction of FAD rearranges the FAD binding pocket in a way that repositions the β‐scaffolding and the N‐cap loop. The resulting conformational changes are likely to be conveyed directly to the HAMP domain, and on to the kinase control module. In support of this hypothesis, we demonstrated disulphide band formation between cysteines substituted at residues N98C or I114C in the PAS β‐scaffold and residue Q248C in the HAMP AS‐2 helix.     

Structure of the RNA‐directed RNA Polymerase from the cystovirus ϕ12

We have determined the structure of P2, the self‐priming RdRp from cystovirus ?12 in two crystal forms (A, B) at resolutions of 1.7 Å and 2.1 Å. Form A contains Mg²⁺ bound at a site that deviates from the canonical noncatalytic position seen in form B. These structures provide insight into the temperature sensitivity of a ts‐mutant. However, the tunnel through which template ssRNA accesses the active site is partially occluded by a flexible loop; this feature, along with suboptimal positioning of other structural elements that prevent the formation of a stable initiation complex, indicate an inactive conformation in crystallo. Proteins 2013; 81:1479–1484. © 2013 Wiley Periodicals, Inc.     

Heterochiral Ala/(αMe)Aze sequential oligopeptides: Synthesis and conformational study

α‐Amino acid residues with a ?,ψ constrained conformation are known to significantly bias the peptide backbone 3D structure. An intriguing member of this class of compounds is (αMe)Aze, characterized by an N^α‐alkylated four‐membered ring and C^α‐methylation. We have already reported that (S)‐(αMe)Aze, when followed by (S)‐Ala in the homochiral dipeptide sequential motif ‐(S)‐(αMe)Aze‐(S)‐Ala‐, tends to generate the unprecedented γ‐bend ribbon conformation, as formation of a regular, fully intramolecularly H‐bonded γ‐helix is precluded, due to the occurrence of a tertiary amide bond every two residues. In this work, we have expanded this study to the preparation and 3D structural analysis of the heterochiral (S)‐Ala/(R)‐(αMe)Aze sequential peptides from dimer to hexamer. Our conformational results show that members of this series may fold in type‐II β‐turns or in γ‐turns depending on the experimental conditions.     

The asymmetric trimeric architecture of [2Fe-2S] IscU: implications for its scaffolding during iron-sulfur cluster biosynthesis

IscU is a key component of the ISC machinery and is involved in the biogenesis of iron-sulfur (Fe-S) proteins. IscU serves as a scaffold for assembly of a nascent Fe-S cluster prior to its delivery to an apo protein. Here, we report the first crystal structure of IscU with a bound [2Fe-2S] cluster from the hyperthermophilic bacterium Aquifex aeolicus, determined at a resolution of 2.3 Å, using multiwavelength anomalous diffraction of the cluster. The holo IscU formed a novel asymmetric trimer that harbored only one [2Fe-2S] cluster. One iron atom of the cluster was coordinated by the S^γ atom of Cys36 and the N^ε atom of His106, and the other was coordinated by the S^γ atoms of Cys63 and Cys107 on the surface of just one of the protomers. However, the cluster was buried inside the trimer between the neighboring protomers. The three protomers were conformationally distinct from one another and associated around a noncrystallographic pseudo-3-fold axis. The three flexible loop regions carrying the ligand-binding residues (Cys36, Cys63, His106 and Cys107) and the N-terminal α1 helices were positioned at the interfaces and underwent substantial conformational rearrangement, which stabilized the association of the asymmetric trimer. This unique trimeric A. aeolicus holo-IscU architecture was clearly distinct from other known monomeric apo-IscU/SufU structures, indicating that asymmetric trimer organization, as well as its association/dissociation, would be involved in the scaffolding function of IscU.     

Ab initio structure prediction of the antibody hypervariable H3 loop

Antibodies have the capability of binding a wide range of antigens due to the diversity of the six loops constituting the complementarity determining region (CDR). Among the six loops, the H3 loop is the most diverse in structure, length, and sequence identity. Prediction of the three‐dimensional structures of antibodies, especially the CDR loops, is an important step in the computational design and engineering of novel antibodies for improved affinity and specificity. Although it has been demonstrated that the conformation of the five non‐H3 loops can be accurately predicted by comparing their sequences against databases of canonical loop conformations, no such connection has been established for H3 loops. In this work, we present the results for ab initio structure prediction of the H3 loop using conformational sampling and energy calculations with the program Prime on a dataset of 53 loops ranging in length from 4 to 22 residues. When the prediction is performed in the crystal environment and including symmetry mates, the median backbone root mean square deviation (RMSD) is 0.5 Å to the crystal structure, with 91% of cases having an RMSD of less than 2.0 Å. When the prediction is performed in a noncrystallographic environment, where the scaffold is constructed by swapping the H3 loops between homologous antibodies, 70% of cases have an RMSD below 2.0 Å. These results show promise for ab initio loop predictions applied to modeling of antibodies. © 2012 Wiley Periodicals, Inc.     

Crystal Structure of the HEAT Domain from the Pre-mRNA Processing Factor Symplekin

The majority of eukaryotic pre-mRNAs are processed by 3′-end cleavage and polyadenylation, although in metazoa the replication-dependent histone mRNAs are processed by 3′-end cleavage but not polyadenylation. The macromolecular complex responsible for processing both canonical and histone pre-mRNAs contains the ∼ 1160-residue protein Symplekin. Secondary-structural prediction algorithms identified putative HEAT domains in the 300 N-terminal residues of all Symplekins of known sequence. The structure and dynamics of this domain were investigated to begin elucidating the role Symplekin plays in mRNA maturation. The crystal structure of the Drosophila melanogaster Symplekin HEAT domain was determined to 2.4 Å resolution with single-wavelength anomalous dispersion phasing methods. The structure exhibits five canonical HEAT repeats along with an extended 31-amino-acid loop (loop 8) between the fourth and fifth repeat that is conserved within closely related Symplekin sequences. Molecular dynamics simulations of this domain show that the presence of loop 8 dampens correlated and anticorrelated motion in the HEAT domain, therefore providing a neutral surface for potential protein-protein interactions. HEAT domains are often employed for such macromolecular contacts. The Symplekin HEAT region not only structurally aligns with several established scaffolding proteins, but also has been reported to contact proteins essential for regulating 3′-end processing. Together, these data support the conclusion that the Symplekin HEAT domain serves as a scaffold for protein-protein interactions essential to the mRNA maturation process.