Automated ‘X‐Y’ robot for peptide synthesis with microwave heating: application to difficult peptide sequences and protein domains

Precise microwave heating has emerged as a valuable method to aid solid‐phase peptide synthesis (SPPS). New methods and reliable protocols, as well as their embodiment in automated instruments, are required to fully use this potential. Here we describe a new automated robotic instrument for SPPS with microwave heating, report protocols for its reliable use and report the application to the synthesis of long sequences, including the β‐amyloid 1‐42 peptide. The instrument is built around a valve‐free robot originally developed for parallel peptide synthesis, where the robotic arm transports reagents instead of pumping reagents via valves. This is the first example of an ‘X‐Y’ robotic microwave‐assisted synthesizer developed for the assembly of long peptides. Although the instrument maintains its capability for parallel synthesis at room temperature, in this paper, we focus on sequential peptide synthesis with microwave heating. With this valve‐free instrument and the protocols developed for its use, fast and efficient syntheses of long and difficult peptide sequences were achieved. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Conventional and microwave‐assisted SPPS approach: a comparative synthesis of PTHrP(1–34)NH2

Attracted by the possibility to optimize time and yield of the synthesis of difficult peptide sequences by MW irradiation, we compared Fmoc/tBu MW‐assisted SPPS of 1–34 N‐terminal fragment of parathyroid hormone‐related peptide (PTHrP) with its conventional SPPS carried out at RT. MWs were applied in both coupling and deprotection steps of SPPS protocol. During the stepwise elongation of the resin‐bound peptide, monitoring was conducted by performing MW‐assisted mini‐cleavages and analyzing them by UPLC‐ESI‐MS. Identification of some deletion sequences was helpful to recognize critical couplings and as such helped to guide the introduction of MW irradiations to these stages. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

O‐Acyl isopeptide method: development of an O‐acyl isodipeptide unit for Boc SPPS and its application to the synthesis of Aβ1‐42 isopeptide

The O‐acyl isopeptide method was developed for the efficient preparation of difficult sequence‐containing peptide. Furthermore, development of the O‐acyl isodipeptide unit for Fmoc chemistry simplified its synthetic procedure by solid‐phase peptide synthesis. Here, we report a novel isodipeptide unit for Boc chemistry, and the unit was successfully applied to the synthesis of amyloid β peptide. Combination of Boc chemistry and the isodipeptide unit would be an effective method for the synthesis of many difficult peptides. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Isopeptide method: development of S‐acyl isopeptide method for the synthesis of difficult sequence‐containing peptides

A novel strategy for a more efficient synthesis of difficult sequence‐containing peptides, the S‐acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac–Val–Val–Cys–Val–Val–NH₂ was synthesized via its water‐soluble S‐acyl isopeptide using an S‐acyl isodipeptide unit, Boc–Cys(Fmoc–Val)–OH. An S‐acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S N intramolecular acyl migration reaction at pH 7.4. Thus, the S‐acyl isopeptide method provides a useful tool in peptide chemistry. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Improved Fmoc‐based solid‐phase synthesis of homologous peptide fragments of human and mouse prion proteins

The synthesis of difficult peptide sequences has been a challenge since the very beginning of SPPS. The self‐assembly of the growing peptide chains has been proposed as one of the causes of this synthetic problem. However, there is an increasing need to obtain peptides and proteins that are prone to aggregate. These peptides and proteins are generally associated with diseases known as amyloidoses. We present an efficient SPPS of two homologous peptide fragments of HuPrP (106–126) and MoPrP105–125 based on the use of the PEGA resin combined with proper coupling approaches. These peptide fragments were also studied by CD and TEM to determine their ability to aggregate. On the basis of these results, we support PEG‐based resins as an efficient synthetic tool to prepare peptide sequences prone to aggregate on‐resin. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of Aβ[1‐42] and its derivatives with improved efficiency

It has been proved that the principal component of senile plaques is aggregates of β‐amyloid peptide (Aβ) in cases of one of the most common forms of age‐related neurodegenerative disorders, Alzheimer's disease (AD). Although the synthetic methods for the synthesis of Aβ peptides have been developed since their first syntheses, Aβ[1‐42] is still problematic to prepare. The highly hydrophobic composition of Aβ[1‐42] results in aggregation between resin‐bound peptide chains or intrachain aggregation which leads to a decrease in the rates of deprotection and repetitive incomplete coupling reactions during 9‐flurenylmethoxycarbonyl (Fmoc) synthesis. In order to avoid aggregation and/or disrupt internal aggregation during stepwise Fmoc solid phase synthesis and to improve the quality of crude products, several attempts have been made. Since highly pure Aβ peptides in large quantities are used in biological experiments, we wanted to develop a method for a rational synthesis of human Aβ[1‐42] with high purity and adequate yield. This paper reports a convenient methodology with a novel solvent system for the synthesis of Aβ[1‐42], its N‐terminally truncated derivatives Aβ[4‐42] and Aβ[5‐42], and Aβ[1‐42] labeled with 7‐amino‐4‐methyl‐3‐coumarinylacetic acid (AMCA) at the N‐terminus using Fmoc strategy. The use of 10% anisole in Dimethylformamide/Dichloromethane (DMF/DCM) can substantially improve the purity and yield of crude Aβ[1‐42] and has been shown to be an optimal coupling condition for the synthesis of Aβ[1‐42]. Anisole is a cheap and simple aid in the synthesis of ‘difficult sequences’ where other solvents are less successful in the prevention of aggregation during the synthesis. Copyright © 2006 European Peptide Society and John Wiley & Sons, Ltd.     

High‐molecular‐weight poly(Gly‐Val‐Gly‐Val‐Pro) synthesis through microwave irradiation

In this study, we synthesized a polypeptide from its pentapeptide unit using microwave irradiation. Effective methods for polypeptide synthesis from unit peptides have not been reported. Here, we used a key elastin peptide, H‐GlyValGlyValPro‐OH (GVGVP), as the monomer peptide. It is difficult to obtain poly(Gly‐Val‐Gly‐Val‐Pro) (poly(GVGVP)) from the pentapeptide unit of elastin, GVGVP, via polycondensation. Poly(GVGVP) prepared from genetically recombinant Escherichia coli is a well‐known temperature‐sensitive polypeptide, and this temperature sensitivity is known as the lower critical solution temperature. When microwave irradiation was performed in the presence of various additives, the pentapeptide (GVGVP) polycondensation reaction proceeded smoothly, resulting in a product with a high molecular weight in a relatively good yield. The reaction conditions, like microwave irradiation, coupling agents, and solvents, were optimized to increase the reaction efficiency. The product exhibited a molecular weight greater than Mr 7000. Further, the product could be synthesized on a gram scale. The synthesized polypeptide exhibited a temperature sensitivity that was similar to that of poly(GVGVP) prepared from genetically recombinant E. coli. Therefore, this technique offers a facile and quick approach to prepare polypeptides in large amounts. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

A simple protocol for combinatorial cyclic depsipeptide libraries sequencing by matrix‐assisted laser desorption/ionisation mass spectrometry

Short cyclic peptides have a great interest in therapeutic, diagnostic and affinity chromatography applications. The screening of ‘one‐bead‐one‐peptide’ combinatorial libraries combined with mass spectrometry (MS) is an excellent tool to find peptides with affinity for any target protein. The fragmentation patterns of cyclic peptides are quite more complex than those of their linear counterparts, and the elucidation of the resulting tandem mass spectra is rather more difficult. Here, we propose a simple protocol for combinatorial cyclic libraries synthesis and ring opening before MS analysis. In this strategy, 4‐hydroxymethylbenzoic acid, which forms a benzyl ester with the first amino acid, was used as the linker. A glycolamidic ester group was incorporated after the combinatorial positions by adding glycolic acid. The library synthesis protocol consisted in the following: (i) incorporation of Fmoc‐Asp[2‐phenylisopropyl (OPp)]‐OH to Ala‐Gly‐oxymethylbenzamide‐ChemMatrix, (ii) synthesis of the combinatorial library, (iii) assembly of a glycolic acid, (iv) couple of an Ala residue in the N‐terminal, (v) removal of OPp, (vi) peptide cyclisation through side chain Asp and N‐Ala amino terminus and (vii) removal of side chain protecting groups. In order to simultaneously open the ring and release each peptide, benzyl and glycolamidic esters were cleaved with ammonia. Peptide sequences could be deduced from the tandem mass spectra of each single bead evaluated. The strategy herein proposed is suitable for the preparation of one‐bead‐one‐cyclic depsipeptide libraries that can be easily open for its sequencing by matrix‐assisted laser desorption/ionisation MS. It employs techniques and reagents frequently used in a broad range of laboratories without special expertise in organic synthesis. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Investigation of peptide thioester formation via N→Se acyl transfer

Native chemical ligation is widely used for the convergent synthesis of proteins. The peptide thioesters required for this process can be challenging to produce, particularly when using Fmoc‐based solid‐phase peptide synthesis. We have previously reported a route to peptide thioesters, following Fmoc solid‐phase peptide synthesis, via an N→S acyl shift that is initiated by the presence of a C‐terminal cysteine residue, under mildly acidic conditions. Under typical reaction conditions, we occasionally observed significant thioester hydrolysis as a consequence of long reaction times (~48 h) and sought to accelerate the reaction. Here, we present a faster route to peptide thioesters, by replacing the C‐terminal cysteine residue with selenocysteine and initiating thioester formation via an N→Se acyl shift. This modification allows thioester formation to take place at lower temperatures and on shorter time scales. We also demonstrate how application of this strategy also accelerates peptide cyclization, when a linear precursor is furnished with an N‐terminal cysteine and C‐terminal selenocysteine. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of stable C‐linked ferrocenyl amino acids and their use in solution‐phase peptide synthesis

Incorporation of ferrocenyl group to peptides is an efficient method to alter their hydrophobicity. Ferrocenyl group can also act as an electrochemical probe when incorporated onto functional peptides. Most often, ferrocene is incorporated onto peptides post‐synthesis via amide, ester or triazole linkages. Stable amino acids containing ferrocene as a C‐linked side chain are potentially useful building units for the synthesis of ferrocene‐containing peptides. We report here an efficient route to synthesize ferrocene‐containing amino acids that are stable and can be used in peptide synthesis. Coupling of 2‐ferrocenyl‐1,3‐dithiane and iodides derived from aspartic acid or glutamic acid using n‐butyllithium leads to the incorporation of a ferrocenyl unit to the δ‐position or ε‐position of an α‐amino acid. The reduction or hydrolysis of the dithiane group yields an alkyl or an oxo derivative. The usability of the synthesized amino acids is demonstrated by incorporating one of the amino acids in both C‐terminus and N‐terminus of tripeptides in solution phase. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Thiocarbamate‐linked peptides by chemoselective peptide ligation

Peptide chemical ligation chemistries, which allow the chemoselective coupling of unprotected peptide fragments, are useful tools for synthesizing native polypeptides or unnatural peptide‐based macromolecules. We show here that the phenylthiocarbonyl group can be easily introduced into peptides on α or ε amino groups using phenylthiochloroformate and standard solid‐phase method. It reacts chemoselectively with cysteinyl peptides to give an alkylthiocarbamate bond. S,N‐shift of the alkylaminocarbonyl group from the Cys side chain to the α‐amino group did not occur. The method was used for linking two peptide chains through their N‐termini, for the synthesis of a cyclic peptide or for the synthesis of di‐ or tetravalent multiple antigenic peptides (MAPs). Thiocarbamate ligation is thus complementary to thioether, thioester or disulfide ligation methods. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

A novel solid phase approach to Aia‐containing peptides

A strategy was developed to directly assemble 4‐amino‐1,2,4,5‐tetrahydro‐indolo[2,3‐c]‐azepin‐3‐ones on solid‐phase‐supported peptide sequences. Fmoc‐ and Boc‐based strategies were investigated. The Fmoc‐strategy approach strongly depends on the peptide sequence being synthesized while the Boc‐based synthesis leads to excellent results for all the selected peptide analogs. The method was applied to prepare Aia‐analogs of several bioactive peptides containing one or more Trp‐residues which were shown to be important for biological recognition. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

A general strategy for the bacterial expression of amyloidogenic peptides using BCL‐XL‐1/2 fusions

Biophysical studies on amyloidogenic and aggregation‐prone peptides often require large quantities of material. However, solid‐phase synthesis, handling, and purification of peptides often present challenges on these scales. Recombinant expression is an attractive alternative because of its low cost, the ability to isotopically label the peptides, and access to sequences exceeding ～50 residues. However, expression systems that seek to solubilize amyloidogenic peptides suffer from low yields, difficult optimizations, and isolation challenges. We present a general strategy for expressing and isolating amyloidogenic peptides in Escherichia coli by fusion to a polypeptide that drives the expression of attached peptides into bacterial inclusion bodies. This scheme minimizes toxicity during bacterial growth and enables the processing and handling of the peptides in denaturing solutions. Immobilized metal affinity chromatography, reverse phase HPLC, and cyanogen bromide cleavage are used to isolate the peptide, followed by further reverse phase HPLC, which yields milligram quantities of the purified peptide. We demonstrate that driving the peptides into inclusion bodies using fusion to BCL‐XL‐1/2 is a general strategy for their expression and isolation, as exemplified by the production of 11 peptides species.     

Improving membrane binding as a design strategy for amphipathic peptide hormones: 2‐helix variants of PYY3‐36

It has been hypothesized that amphipathic peptides might bind to membranes prior to activating their cognate receptors, but this has proven difficult to test. The peptide hormone PYY3‐36 is believed to perform its appetite‐suppressing actions through binding to hypothalamic Y2 receptors. It has been proposed that PYY3‐36 via its amphipathic α‐helix binds to the plasma membrane prior to receptor docking. Here, our aim was to study the implication of this hypothesis using new analogs of PYY3‐36. We first studied membrane binding of PYY3‐36. Next, we designed a series of PYY3‐36 analogs to increase membrane‐binding affinity by substituting the N‐terminal segment with a de novo designed α‐helical, amphipathic sequence. These 2‐helix variants of PYY3‐36 were assembled by solid‐phase peptide synthesis. Pharmacological studies demonstrated that even though the native peptide sequence was radically changed, highly active Y2 receptor agonists were generated. A potent analog, with a Kd of 4 nM for membranes, was structurally characterized by NMR in the membrane‐bound state, which clearly showed that it formed the expected 2‐helix. The topology of the peptide–micelle association was studied by paramagnetic relaxation enhancement using a spin label, which confirmed that the hydrophobic residues bound to the membrane. Our studies further support the hypothesis that PYY3‐36 associates with the membrane and indicate that this can be used in the design of novel molecules with high receptor binding potency. These observations are likely to be generally important for peptide hormones and biopharmaceutical drugs derived from them. This new 2‐helix variant of PYY3‐36 will be useful as a tool compound for studying peptide–membrane interactions. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Optimization of solid-phase synthesis of difficult peptide sequences via comparison between different improved approaches

Summary. Different approaches are applied to avoid the strong aggregation of the difficult peptide sequences, which is considered as the main reason for incomplete acylation and deprotection reactions hindering the synthesis of these sequences. Temporary protection of amide nitrogen of peptide bond using 2-hydroxy-4-methoxybenzyl (Hmb) and 2,4,6-timethoxybenzyl (Tmob) amino acid derivatives, introduction of D-Ala or Pro residues in the peptide chain sequences and utilization of microwave energy are proved to be useful methods in the enhancement of solubility and in the hindrance of the aggregation during the solid-phase synthesis of oligoalanine. Oligoalanine is chosen to demonstrate the difficult sequences and to compare the efficiencies of these methods.     

Fmoc‐based peptide thioester synthesis with self‐purifying effect: heading to native chemical ligation in parallel formats

The chemical synthesis of proteins has facilitated functional studies of proteins due to the site‐specific incorporation of post‐translational modifications, labels, and non‐proteinogenic amino acids. Moreover, native chemical ligation provides facile access to proteins by chemical means. However, the application of the native chemical ligation reaction in the synthesis of parallel formats such as protein arrays has been complicated because of the often cumbersome and time‐consuming synthesis of the required peptide thioesters. An Fmoc‐based peptide thioester synthesis with self‐purification on the sulfonamide ‘safety‐catch’ linker widens this bottleneck because HPLC purification can be avoided. The method is based on an on‐resin cyclization–thiolysis reaction sequence. A macrocyclization via the N‐terminus of the full‐length peptide followed by a thiolytic C‐terminal ring opening allows selective detachment of the truncation products and the full‐length peptide. A brief overview of the chemical aspects of this method is provided including the optimization steps and the automation process. Furthermore, the application of the cyclization–thiolysis approach combined with the native chemical ligation reaction in the parallel synthesis of a library of 16 SH3‐domain variants of SHO1 in yeast is described, demonstrating the value of this new technique for the chemical synthesis of protein arrays. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and characterization of β‐peptide helices as transmembrane domains in lipid model membranes

Aggregation, orientation and dynamics of transmembrane helices are of relevance for protein function and transmembrane signaling. To explore the interactions of transmembrane helices and the interdependence of peptide structure and lipid composition of the membranes, β‐peptides were explored as model transmembrane domains. Various hydrophobic β‐peptide sequences were synthesized by solid phase peptide synthesis. Conformational analyses of β‐peptide helices were performed in organic solvents (methanol and 2,2,2‐trifluoroethanol) and in large unilamellar liposomes (dimyristoylphosphatidylcholine, dipalmitoylphosphatidylcholine and dioleoylphosphatidylcholine) indicating 12‐ and 14‐helix conformations, depending on β³‐amino acid sequences. The intrinsic tryptophan fluorescence of β³‐homotryptophan units inserted in the center or near the end of the sequence was used to verify the membrane insertion of the β‐peptides. A characteristic blue shift with peripheral β³‐homotryptophan compared with β‐peptides with central tryptophan served as indication for a transmembrane orientation of the β‐peptides within the lipid bilayer. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of lucifensin by native chemical ligation and characteristics of its isomer having different disulfide bridge pattern

The antimicrobial 40‐amino‐acid‐peptide lucifensin was synthesized by native chemical ligation (NCL) using N‐acylbenzimidazolinone (Nbz) as a linker group. NCL is a method in which a peptide bond between two discreet peptide chains is created. This method has been applied to the synthesis of long peptides and proteins when solid‐phase synthesis is imcompatible. Two models of ligation were developed: [15 + 25] Ala‐Cys and [19 + 21] His‐Cys. The [19 + 21] His‐Cys method gives lower yield because of the lower stability of 18‐peptide‐His‐Nbz‐CONH₂ peptide, as suggested by density functional theory calculation. Acetamidomethyl‐deprotection and subsequent oxidation of the ligated linear lucifensin gave a mixture of lucifensin isomers, which differed in the location of their disulfide bridges only. The dominant isomer showed unnatural pairing of cysteines [C1?6], [C3?5], and [C2?4], which limits its ability to form α‐helical structure. The activity of isomeric lucifensin toward Bacillus subtilis, Staphylococcus aureus, and Micrococcus luteus was lower than that of the natural lucifensin. The desired product native lucifensin was prepared from this isomer using a one‐pot reduction with dithiotreitol and subsequent air oxidation in slightly alkaline medium. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Overexpression of CupB5 activates alginate overproduction in Pseudomonas aeruginosa by a novel AlgW‐dependent mechanism

In Pseudomonas aeruginosa, alginate overproduction, also known as mucoidy, is negatively regulated by the transmembrane protein MucA, which sequesters the alternative sigma factor AlgU. MucA is degraded via a proteolysis pathway that frees AlgU from sequestration, activating alginate biosynthesis. Initiation of this pathway normally requires two signals: peptide sequences in unassembled outer‐membrane proteins (OMPs) activate the AlgW protease, and unassembled lipopolysaccharides bind periplasmic MucB, releasing MucA and facilitating its proteolysis by activated AlgW. To search for novel alginate regulators, we screened a transposon library in the non‐mucoid reference strain PAO1, and identified a mutant that confers mucoidy through overexpression of a protein encoded by the c haperone‐u sher p athway gene cupB5. CupB5‐dependent mucoidy occurs through the AlgU pathway and can be reversed by overexpression of MucA or MucB. In the presence of activating OMP peptides, peptides corresponding to a region of CupB5 needed for mucoidy further stimulated AlgW cleavage of MucA in vitro. Moreover, the CupB5 peptide allowed OMP‐activated AlgW cleavage of MucA in the presence of the MucB inhibitor. These results support a novel mechanism for conversion to mucoidy in which the proteolytic activity of AlgW and its ability to compete with MucB for MucA is mediated by independent peptide signals.     

Chemically synthesized peptide libraries as a new source of BBB shuttles. Use of mass spectrometry for peptide identification

The blood–brain barrier (BBB) is a biological barrier that protects the brain from neurotoxic agents and regulates the influx and efflux of molecules required for its correct function. This stringent regulation hampers the passage of brain parenchyma‐targeting drugs across the BBB. BBB shuttles have been proposed as a way to overcome this hurdle because these peptides can not only cross the BBB but also carry molecules which would otherwise be unable to cross the barrier unaided. Here we developed a new high‐throughput screening methodology to identify new peptide BBB shuttles in a broadly unexplored chemical space. By introducing d‐ amino acids, this approach screens only protease‐resistant peptides. This methodology combines combinatorial chemistry for peptide library synthesis, in vitro models mimicking the BBB for library evaluation and state‐of‐the‐art mass spectrometry techniques to identify those peptides able to cross the in vitro assays. BBB shuttle synthesis was performed by the mix‐and‐split technique to generate a library based on the following: Ac‐d‐ Arg‐XXXXX‐NH₂, where X were: d‐ Ala (a), d‐ Arg (r), d‐ Ile (i), d‐ Glu (e), d‐ Ser (s), d‐ Trp (w) or d‐ Pro (p). The assays used comprised the in vitro cell‐based BBB assay (mimicking both active and passive transport) and the PAMPA (mimicking only passive diffusion). The identification of candidates was determined using a two‐step mass spectrometry approach combining LTQ‐Orbitrap and Q‐trap mass spectrometers. Identified sequences were postulated to cross the BBB models. We hypothesized that some sequences cross the BBB through passive diffusion mechanisms and others through other mechanisms, including paracellular flux and active transport. These results provide a new set of BBB shuttle peptide families. Furthermore, the methodology described is proposed as a consistent approach to search for protease‐resistant therapeutic peptides. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.