A comprehensive set of DnaA-box mutations in the replication origin, oriC, of Escherichia coli

We probed the complex between the replication origin, oriC , and the initiator protein DnaA using different types of mutations in the five binding sites for DnaA, DnaA boxes R1–R4 and M: (i) point mutations in individual DnaA boxes and combinations of them; (ii) replacement of the DnaA boxes by a scrambled 9 bp non-box motif; (iii) positional exchange; and (iv) inversion of the DnaA boxes. For each of the five DnaA boxes we found at least one type of mutation that resulted in a phenotype. This demonstrates that all DnaA boxes in oriC have a function in the initiation process. Most mutants with point mutations retained some origin activity, and the in vitro DnaA-binding capacity of these origins correlated well with their replication proficiency. Inversion or scrambling of DnaA boxes R1 or M inactivated oriC -dependent replication of joint replicons or minichromosomes under all conditions, demonstrating the importance of these sites. In contrast, mutants with inverted or scrambled DnaA boxes R2 or R4 could not replicate in wild-type hosts but gave transformants in host strains with deleted or compromised chromosomal oriC at elevated DnaA concentrations. We conclude that these origins require more DnaA per origin for initiation than does wild-type oriC . Mutants in DnaA box R3 behaved essentially like wild-type oriC , except for those in which the low-affinity box R3 was replaced by the high-affinity box R1. Apparently, initiation is possible without DnaA binding to box R3, but high-affinity DnaA binding to DnaA box R3 upsets the regulation. Taken together, these results demonstrate that there are finely tuned DnaA binding requirements for each of the individual DnaA boxes for optimal build-up of the initiation complex and replication initiation in vivo     

DnaA protein binding to individual DnaA boxes in the Escherichia coli replication origin, oriC.

The formation of nucleoprotein complexes between the Escherichia coli initiator protein DnaA and the replication origin oriC was analysed in vitro by band-shift assays and electron microscopy. DnaA protein binds equally well to linear and supercoiled oriC substrates as revealed by analysis of the binding preference to individual DnaA boxes (9-mer repeats) in oriC, and by a competition band-shift assay. DnaA box R4 (oriC positions 260-268) binds DnaA preferentially and in the oriC context with higher affinity than expected from its binding constant. This effect depends on oriC positions 249 to 274, is enhanced by the wild-type sequence in the DnaA box R3 region, but is not dependent on Dam methylation or the curved DNA segment to the right of oriC. DnaA binds randomly to the DnaA boxes R1, M, R2 and R3 in oriC with no apparent cooperativity: the binding preference of DnaA to these sites was not altered for templates with mutated DnaA box R4. In the oriC context, DnaA box R1 binds DnaA with lower affinity than expected from its binding constant, i.e. the affinity is reduced to approximately that of DnaA box R2. Higher protein concentrations were required to observe binding to DnaA box M, making this low-affinity site a novel candidate for a regulatory dnaA box.     

Rifampicin-resistant initiation of chromosome replication from oriC in ihf mutants

IHF (integration host factor) mutants exhibit asynchronous initiation of chromosome replication from oriC as determined from flow cytometric analysis of cultures where RNA synthesis was inhibited with rifampicin. However, the run-out kinetics of chromosome replication in ihf mutants shows that they continue to produce oriCs for some time in the absence of RNA synthesis resulting in a twofold increase in the oriC per mass ratio. An ihf dnaA double mutant did not exhibit this continued increase of the oriC per mass ratio. This indicates that ihf mutants can initiate replication from oriC in a rifampicin-resistant initiation mode but requires fully functional DnaA protein. The origin per mass ratio, determined by a quantitative Southern blotting technique, showed that the ihf mutants had an origin per mass ratio that was 60% of the wild type although it had a normal DnaA protein concentration. This shows that the initiation mass was substantially higher in the ihf mutants. The oriC per terminus ratio, which was also determined by Southern blotting, was very low in the ihf mutant, although it grew with the same doubling times as the wild-type strain. This indicates that cells lacking IHF replicate their chromosome(s) very fast.     

Mutations in the DnaA binding sites of the replication origin of Escherichia coli.

Summary Mutations (base changes) were introduced into the four DnaA binding sites (DnaA boxes) of theEscherichia coli replication origin,oriC. Mutations in a single DnaA box did not impair the ability of these origins to replicate in vivo and in vitro. A combination of mutations in two DnaA boxes, R1 and R4, resulted in slower growth of theoriC plasmid-bearing host cells. DnaA protein interaction with mutant and wild-type DnaA boxes was analyzed by DNase I footprinting. Binding of DnaA protein to a mutated DnaA box R1 was not affected by a mutation in DnaA box R4 and vice versa. Mutations in DnaA boxes R1 and R4 did not modify the ability of the DnaA protein to bind to other DnaA boxes inoriC.     

IHF redistributes bound initiator protein, DnaA, on supercoiled oriC of Escherichia coli

In Escherichia coli, initiation of chromosome replication requires that DnaA binds to R boxes (9-mer repeats) in oriC, the unique chromosomal replication origin. At the time of initiation, integration host factor (IHF) also binds to a specific site in oriC. IHF stimulates open complex formation by DnaA on supercoiled oriC in cell-free replication systems, but it is unclear whether this stimulation involves specific changes in the oriC nucleoprotein complex. Using dimethylsulphate (DMS) footprinting on supercoiled oriC plasmids, we observed that IHF redistributed prebound DnaA, stimulating binding to sites R2, R3 and R5(M), as well as to three previously unidentified non-R sites with consensus sequence (A/T)G(G/C) (A/T)N(G/C)G(A/T)(A/T)(T/C)A. Redistribution was dependent on IHF binding to its cognate site and also required a functional R4 box. By reducing the DnaA level required to separate DNA strands and trigger initiation of DNA replication at each origin, IHF eliminates competition between strong and weak sites for free DnaA and enhances the precision of initiation synchrony during the cell cycle.     

Binding of DnaA protein to a replication enhancer counteracts the inhibition of plasmid R6K gamma origin replication mediated by elevated levels of R6K pi protein.

Replication of the gamma origin of Escherichia coli plasmid R6K requires pi protein, encoded by the R6K pir gene, and many host factors, including DnaA protein. Pi has dual roles, activating replication at low levels and inhibiting replication at high levels. The inhibitory function of pi is counteracted by integration host factor and a specific sequence of the origin called the enhancer. This 106-bp DNA segment contains a binding site for DnaA protein (DnaA box 1). In this study, we mutated this site to determine if it was required for the enhancer's function. Using gamma origin derivative plasmids with the DnaA box 1 altered or deleted, we show that this site is necessary to protect the origin against levels of wild-type pi protein that would otherwise inhibit replication. To show that the base substitutions in DnaA box 1 weakened the binding of DnaA, we developed a new application of the agarose gel retardation assay. This quick and easy assay has broad applicability, as shown in binding studies with DNA fragments carrying a different segment of the R6K origin, the chromosomal origin (oriC), or the pUC origin. The gel retardation assay suggests a stoichiometry of DnaA binding different from that deduced from other assays.     

Loss of Hda activity stimulates replication initiation from I-box, but not R4 mutant origins in Escherichia coli

Initiation of chromosome replication in Escherichia coli is limited by the initiator protein DnaA associated with ATP. Within the replication origin, binding sites for DnaA associated with ATP or ADP (R boxes) and the DnaA^ATP specific sites (I-boxes, τ-boxes and 6-mer sites) are found. We analysed chromosome replication of cells carrying mutations in conserved regions of oriC . Cells carrying mutations in DnaA-boxes I2, I3, R2, R3 and R5 as well as FIS and IHF binding sites resembled wild-type cells with respect to origin concentration. Initiation of replication in these mutants occurred in synchrony or with slight asynchrony only. Furthermore, lack of Hda stimulated initiation in all these mutants. The DnaA^ATP containing complex that leads to initiation can therefore be formed in the absence of several of the origin DnaA binding sites including both DnaA^ATP specific I-boxes. However, competition between I-box mutant and wild-type origins , revealed a positive role of I-boxes on initiation. On the other hand, mutations affecting DnaA-box R4 were found to be compromised for initiation and could not be augmented by an increase in cellular DnaA^ATP/DnaA^ADP ratio. Compared with the sites tested here, R4 therefore seems to contribute to initiation most critically.     

The DnaA box R4 in the minimal oriC is dispensable for initiation of Escherichia coli chromosome replication.

We have developed a genetic system with which to replace oriC+ on the Escherichia coli chromosome with modified oriC sequences constructed on plasmids. Using this system we have demonstrated that chromosomal oriC can tolerate the insertion of a 2 kb fragment at the HindIII site between DnaA boxes R3 and R4, whereas the same insertion completely inactivates cloned oriC. We have further found that although R4 is essential for the origin activity of cloned oriC, cells carrying a deletion of R4 in chromosomal oriC are viable. These results indicate that the oriC sequence necessary for initiation of chromosome replication is different from the so-called minimal oriC that was determined with cloned oriC. Flow cytometric analyses have revealed that these oriC mutations confer the initiation asynchrony phenotype. Introduction of the R4 deletion into a fis::kan mutant, which lacks the DNA bending protein FIS, renders the mutant cells inviable.     

High-affinity binding sites for the initiator protein DnaA on the chromosome of Escherichia coli

The initiator protein DnaA of Escherichia coli binds with unusually high affinity to five regions on the chromosome, in addition to the replication origin, oriC . Using a solid-phase DNA binding assay, in which the DNA binding C-terminal domain of DnaA is bound via a biotin tag to magnetic beads, we could fish only fragments with these six regions from different chromosomal digests. Except for oriC , these fragments contain only one or two consensus DnaA binding sites, DnaA boxes. The distribution of these high-affinity DnaA boxes on the chromosome is random.     

Regulation of chromosomal replication by DnaA protein availability in Escherichia coli: effects of the datA region.

Initiation of chromosomal replication in Escherichia coli is dependent on availability of the initiator protein DnaA. We have introduced into E. coli cells plasmids carrying the chromosomal locus datA, which has a high affinity for DnaA. To be able to monitor oriC initiation as a function of datA copy number, we introduced a minichromosome which only replicates from oriC, using a host cell which replicates its chromosome independently of oriC. Our data show that a moderate increase in datA copy number is accompanied by increased DnaA protein synthesis that allows oriC initiation to occur normally, as measured by minichromosome copy number. As datA gene dosage is increased dnaA expression cannot be further derepressed, and the minichromosome copy number is dramatically reduced. Under these conditions the minichromosome was maintained by integration into the chromosome. These findings suggest that the datA locus plays a significant role in regulating oriC initiation, by its capacity to bind DnaA. They also suggest that auto regulation of the dnaA gene is of minor importance in regulation of chromosome initiation.     

Escherichia coli DnaA protein: specific biochemical defects of mutant DnaAs reduce initiation frequency to suppress a temperature-sensitive dnaX mutation

The Escherichia coli dnaA73, dnaA721, and dnaA71 alleles, which encode A213D, R432L, T435K substitutions, respectively, were originally isolated as extragenic suppressors of a temperature-sensitive dnaX mutant. As the A213D substitution resides in a domain that functions in ATP binding and the R432L and T435K substitutions affect residues that recognize the DnaA box motif, they might be expected to reduce ATP and specific DNA binding, respectively. Therefore, a major objective was to quantify the biochemical defects of the mutant DnaAs to understand how the altered proteins suppress the temperature-sensitive phenotype of a dnaX mutant. A second purpose was to address the paradox that mutant proteins with substitutions of amino acids essential for recognition of the DnaA box motifs within the E. coli replication origin (oriC) may well be inactive in initiation, yet chromosomal dnaA mutants expressing DnaA proteins with the R432L and T435K substitutions are viable at temperatures from 30 to 39 degrees C. We show biochemically that mutant DnaAs carrying R432L and T435K substitutions fail to bind to the DnaA box sequence. The A213D mutant is sevenfold reduced in its affinity for ATP compared to wild-type DnaA, and its affinity for the DnaA box sequence is also reduced. However, the reduced activity of the A213D mutant in oriC plasmid replication appears to arise from a defect in DnaA oligomerization. Although the T435K mutant fails to bind to the DnaA box sequence, other results suggest that DnaA oligomerization stabilizes the binding of the mutant DnaA to oriC to support its partial activity in initiation in vitro. These results support a model that suppression of dnaX occurs by reducing the frequency of initiation to a manageable level for the mutant DnaX so that viability is maintained.     

DnaA boxes are important elements in setting the initiation mass of Escherichia coli

The binding of DnaA protein to its DNA binding sites-DnaA boxes-in the chromosomal oriC region is essential for initiation of chromosome replication. In this report, we show that additional DnaA boxes affect chromosome initiation control, i.e., increase the initiation mass. The cellular DnaA box concentration was increased by introducing pBR322-derived plasmids carrying DnaA boxes from the oriC region into Escherichia coli and by growing the strains at different generation times to obtain different plasmid copy numbers. In fast-growing cells, where the DnaA box plasmid copy number per oriC locus was low, the presence of extra DnaA boxes caused only a moderate increase in the initiation mass. In slowly growing cells, where the DnaA box plasmid copy number per oriC locus was higher, we observed more pronounced increases in the initiation mass. Our data clearly show that the presence of extra DnaA boxes increases the initiation mass, supporting the idea that the initiation mass is determined by the normal complement of DnaA protein binding sites in E. coli cells.     

Identification of the chromosomal replication origin from Thermus thermophilus and its interaction with the replication initiator DnaA

The chromosomal replication origin oriC and the gene encoding the replication initiator protein DnaA from Thermus thermophilus have been identified and cloned into an Escherichia coli vector system. The replication origin is composed of 13 characteristically arranged DnaA boxes, binding sites for the DnaA protein, and an AT-rich stretch, followed by the dnaN gene. The dnaA gene is located upstream of the origin and expresses a typical DnaA protein that follows the division into four domains, as with other members of the DnaA protein family. Here, we report the purification of Thermus-DnaA (Tth-DnaA) and characterize the interaction of the purified protein with the replication origin, with regard to the binding kinetics and stoichiometry of this interaction. Using gel retardation assays, surface plasmon resonance (SPR) and electron microscopy, we show that, unlike the E. coli DnaA, Tth-DnaA does not recognize a single DnaA box, instead a cluster of three tandemly repeated DnaA boxes is the minimal requirement for specific binding. The highest binding affinities are observed with full-length oriC or six clustered, tandemly repeated DnaA boxes. Furthermore, high-affinity DNA-binding of Tth-DnaA is dependent on the presence of ATP. The Thermus DnaA/oriC interaction will be compared with oriC complex formation generated by other DnaA proteins.     

A critical DnaA box directs the cooperative binding of the Escherichia coli DnaA protein to the plasmid RK2 replication origin.

The requirement of DnaA protein binding for plasmid RK2 replication initiation the Escherichia coli was investigated by constructing mutations in the plasmid replication origin that scrambled or deleted each of the four upstream DnaA boxes. Altered origins were analyzed for replication activity in vivo and in vitro and for binding to the E. coli DnaA protein using a gel mobility shift assay and DNase I footprinting. Most strikingly, a mutation in one of the boxes, box 4, abolished replication activity and eliminated stable DnaA protein binding to all four boxes. Unlike DnaA binding to the E. coli origin, oriC, DnaA binding to two of the boxes (boxes 4 and 3) in the RK2 origin, oriV, is cooperative with box 4 acting as the "organizer" for the formation of the DnaA-oriV nucleoprotein complex. Interestingly, the inversion of box 4 also abolished replication activity, but did not result in a loss of binding to the other boxes. However, DnaA binding to this mutant origin was no longer cooperative. These results demonstrate that the sequence, position, and orientation of box 4 are crucial for cooperative DnaA binding and the formation of a nucleoprotein structure that is functional for the initiation of replication.     

Characterization of an autonomously replicating region from the Streptomyces lividans chromosome.

The chromosomal replication origin of the plasmidless derivative (TK21) from Streptomyces lividans 66 has been cloned as an autonomously replicating minichromosome (pSOR1) by using the thiostrepton resistance gene as a selectable marker. pSOR1 could be recovered as a closed circular plasmid which shows high segregational instability. pSOR1 was shown to replicate in Streptomyces coelicolor A3(2) and in S. lividans 66 and hybridized with DNA from several different Streptomyces strains. Physical mapping revealed that oriC is located on a 330-kb AseI fragment of the S. coelicolor A3(2) chromosome. DNA sequence analyses showed that the cloned chromosomal oriC region contains numerous DnaA boxes which are arranged in two clusters. The preferred sequence identified in the oriC region of Escherichia coli and several other bacteria is TTATCCACA. In contrast, in S. lividans, which has a high GC content, the preferred sequence for DnaA boxes appears to be TTGTCCACA.     

The FIS protein fails to block the binding of DnaA protein to oriC, the Escherichia coli chromosomal origin.

The Escherichia coli chromosomal origin contains several bindings sites for factor for inversion stimulation (FIS), a protein originally identified to be required for DNA inversion by the Hin and Gin recombinases. The primary FIS binding site is close to two central DnaA boxes that are bound by DnaA protein to initiate chromosomal replication. Because of the close proximity of this FIS site to the two DnaA boxes, we performed in situ footprinting with 1, 10-phenanthroline-copper of complexes formed with FIS and DnaA protein that were separated by native gel electrophoresis. These studies show that the binding of FIS to the primary FIS site did not block the binding of DnaA protein to DnaA boxes R2 and R3. Also, FIS appeared to be bound more stably to oriC than DnaA protein, as deduced by its reduced rate of dissociation from a restriction fragment containing oriC . Under conditions in which FIS was stably bound to the primary FIS site, it did not inhibit oriC plasmid replication in reconstituted replication systems. Inhibition, observed only at high levels of FIS, was due to absorption by FIS binding of the negative superhelicity of the oriC plasmid that is essential for the initiation process.     

Regulation of the initiation of chromosomal replication in bacteria

The initiation of chromosomal replication occurs only once during the cell cycle in both prokaryotes and eukaryotes. Initiation of chromosome replication is the first and tightly controlled step of a DNA synthesis. Bacterial chromosome replication is initiated at a single origin, oriC, by the initiator protein DnaA, which specifically interacts with 9-bp non-palindromic sequences (DnaA boxes) at oriC. In Escherichia coli, a model organism used to study the mechanism of DNA replication and its regulation, the control of initiation relies on a reduction of the availability and/or activity of the two key elements, DnaA and the oriC region. This review summarizes recent research into the regulatory mechanisms of the initiation of chromosomal replication in bacteria, with emphasis on organisms other than E. coli.     

DnaA Protein of Escherichia coli: oligomerization at the E. coli chromosomal origin is required for initiation and involves specific N-terminal amino acids

Iterated DnaA box sequences within the replication origins of bacteria and prokaryotic plasmids are recognized by the replication initiator, DnaA protein. At the E. coli chromosomal origin, oriC, DnaA is speculated to oligomerize to initiate DNA replication. We developed an assay of oligomer formation at oriC that relies on complementation between two dnaA alleles that are inactive by themselves. One allele is dnaA46; its inactivity at the non-permissive temperature is due to a specific defect in ATP binding. The second allele, T435K, does not support DNA replication because of its inability to bind to DnaA box sequences within oriC. We show that the T435K allele can complement the dnaA46(Ts) allele. The results support a model of oligomer formation in which DnaA box sequences of oriC are bound by DnaA46 to which T435K then binds to form an active complex. Relying on this assay, leucine 5, tryptophan 6 and cysteine 9 in a predicted alpha helix were identified that, when altered, interfere with oligomer formation. Glutamine 8 is additionally needed for oligomer formation on an oriC-containing plasmid, suggesting that the structure of the DnaA-oriC complex at the chromosomal oriC locus is similar but not identical to that assembled on a plasmid. Other evidence suggests that proline 28 of DnaA is involved in the recruitment of DnaB to oriC. These results provide direct evidence that DnaA oligomerization at oriC is required for initiation to occur.