Reconstruction of Mycobacterial Dehalogenase Rv2579 by Cumulative Mutagenesis of Haloalkane Dehalogenase LinB

The homology model of protein Rv2579 from Mycobacterium tuberculosis H37Rv was compared with the crystal structure of haloalkane dehalogenase LinB from Sphingomonas paucimobilis UT26, and this analysis revealed that 6 of 19 amino acid residues which form an active site and entrance tunnel are different in LinB and Rv2579. To characterize the effect of replacement of these six amino acid residues, mutations were introduced cumulatively into the six amino acid residues of LinB. The sixfold mutant, which was supposed to have the active site of Rv2579, exhibited haloalkane dehalogenase activity with the haloalkanes tested, confirming that Rv2579 is a member of the haloalkane dehalogenase protein family.     

Identification of the catalytic triad in the haloalkane dehalogenase from Sphingomonas paucimobilis UT26

The haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB) is the enzyme involved in the gamma-hexachlorocyclohexane degradation. This enzyme hydrolyses a broad range of halogenated aliphatic compounds via an alkyl-enzyme intermediate. LinB is believed to belong to the family of alpha/beta-hydrolases which employ a catalytic triad, i.e. nucleophile-histidine-acid, during the catalytic reaction. The position of the catalytic triad within the sequence of LinB was probed by a site-directed mutagenesis. The catalytic triad residues of the haloalkane dehalogenase LinB are proposed to be D108, H272 and E132. The topological location of the catalytic acid (E132) is after the beta-strand six which corresponds to the location of catalytic acid in the pancreatic lipase, but not in the haloalkane dehalogenase of Xanthobacter autotrophicus GJ10 which contains the catalytic acid after the beta-strand seven.     

X-ray crystal structure of Mycobacterium tuberculosis haloalkane dehalogenase Rv2579

Haloalkane dehalogenases are enzymes well known to be important in bioremediation; the organisms from which they are produced are able to clean up toxic organohalides from polluted environments. However, besides being found in such contaminated environments, these enzymes have also been found in root or tissue-colonizing bacterial species. The haloalkane dehalogenase Rv2579 from Mycobacterium tuberculosis H37Rv has been cloned, expressed, purified and its crystal structure determined at high resolution (1.2A). In addition, the crystal structure of the enzyme has been determined in complex with the product from the reaction with 1,3-dibromopropane, i.e. 1,3-propanediol and in complex with the classical substrate of haloalkane dehalogenases, 1,2-dichloroethane. The enzyme is a two-domain protein having a catalytic domain of an alpha/beta hydrolase fold and a cap domain. The active site residues and the halide-stabilizing residues have been identified as Asp109, Glu133, His273, Asn39 and Trp110. Its overall structure is similar to those of other known haloalkane dehalogenases. Its mechanism of action involves an SN2 nucleophilic displacement.     

Catalytic mechanism of the maloalkane dehalogenase LinB from Sphingomonas paucimobilis UT26

Haloalkane dehalogenases are bacterial enzymes capable of carbon-halogen bond cleavage in halogenated compounds. To obtain insights into the mechanism of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB), we studied the steady-state and presteady-state kinetics of the conversion of the substrates 1-chlorohexane, chlorocyclohexane, and bromocyclohexane. The results lead to a proposal of a minimal kinetic mechanism consisting of three main steps: (i) substrate binding, (ii) cleavage of the carbon-halogen bond with simultaneous formation of an alkyl-enzyme intermediate, and (iii) hydrolysis of the alkyl-enzyme intermediate. Release of both products, halide and alcohol, is a fast process that was not included in the reaction mechanism as a distinct step. Comparison of the kinetic mechanism of LinB with that of haloalkane dehalogenase DhlA from Xantobacter autotrophicus GJ10 and the haloalkane dehalogenase DhaA from Rhodococcus rhodochrous NCIMB 13064 shows that the overall mechanisms are similar. The main difference is in the rate-limiting step, which is hydrolysis of the alkylenzyme intermediate in LinB, halide release in DhlA, and liberation of an alcohol in DhaA. The occurrence of different rate-limiting steps for three enzymes that belong to the same protein family indicates that extrapolation of this important catalytic property from one enzyme to another can be misleading even for evolutionary closely related proteins. The differences in the rate-limiting step were related to: (i) number and size of the entrance tunnels, (ii) protein flexibility, and (iii) composition of the halide-stabilizing active site residues based on comparison of protein structures.     

Crystal structure of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26

The haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB) is the enzyme involved in the degradation of the important environmental pollutant gamma-hexachlorocyclohexane. The enzyme hydrolyzes a broad range of halogenated cyclic and aliphatic compounds. Here, we present the 1.58 A crystal structure of LinB and the 2.0 A structure of LinB with 1,3-propanediol, a product of debromination of 1,3-dibromopropane, in the active site of the enzyme. The enzyme belongs to the alpha/beta hydrolase family and contains a catalytic triad (Asp108, His272, and Glu132) in the lipase-like topological arrangement previously proposed from mutagenesis experiments. The LinB structure was compared with the structures of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 and from Rhodococcus sp. and the structural features involved in the adaptation toward xenobiotic substrates were identified. The arrangement and composition of the alpha-helices in the cap domain results in the differences in the size and shape of the active-site cavity and the entrance tunnel. This is the major determinant of the substrate specificity of this haloalkane dehalogenase.     

Expression of glycosylated haloalkane dehalogenase LinB in Pichia pastoris

Heterologous expression of the bacterial enzyme haloalkane dehalogenase LinB from Sphingomonas paucimobilis UT26 in methylotrophic yeast Pichia pastoris is reported. The haloalkane dehalogenase gene linB was subcloned into the pPICZalphaA vector and integrated into the genome of P. pastoris. The recombinant LinB secreted from the yeast was purified to homogeneity and biochemically characterized. The deglycosylation experiment and mass spectrometry measurements showed that the recombinant LinB expressed in P. pastoris is glycosylated with a 2.8 kDa size of high mannose core. The specific activity of the glycosylated LinB was 15.6 +/- 3.7 micromol/min/mg of protein with 1,2-dibromoethane and 1.86 +/- 0.36 micromol/min/mg of protein with 1-chlorobutane. Activity and solution structure of the protein produced in P. pastoris is comparable with that of recombinant LinB expressed in Escherichia coli. The melting temperature determined by the circular dichroism (41.7+/-0.3 degrees C for LinB expressed in P. pastoris and 41.8 +/- 0.3 degrees C expressed in E. coli) and thermal stability measured by specific activity to 1-chlorobutane were also similar for two enzymes. Our results show that LinB can be extracellularly expressed in eukaryotic cell and glycosylation had no effect on activity, protein fold and thermal stability of LinB.     

Exploring the structure and activity of haloalkane dehalogenase from Sphingomonas paucimobilis UT26: evidence for product- and water-mediated inhibition

The hydrolysis of haloalkanes to their corresponding alcohols and inorganic halides is catalyzed by alpha/beta-hydrolases called haloalkane dehalogenases. The study of haloalkane dehalogenases is vital for the development of these enzymes if they are to be utilized for bioremediation of organohalide-contaminated industrial waste. We report the kinetic and structural analysis of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB) in complex with each of 1,2-dichloroethane and 1,2-dichloropropane and the reaction product of 1-chlorobutane turnover. Activity studies showed very weak but detectable activity of LinB with 1,2-dichloroethane [0.012 nmol s(-1) (mg of enzyme)(-1)] and 1,2-dichloropropane [0.027 nmol s(-1) (mg of enzyme)(-1)]. These activities are much weaker compared, for example, to the activity of LinB with 1-chlorobutane [68.2 nmol s(-1) (mg of enzyme)(-1)]. Inhibition analysis reveals that both 1,2-dichloroethane and 1,2-dichloropropane act as simple competitive inhibitors of the substrate 1-chlorobutane and that 1,2-dichloroethane binds to LinB with lower affinity than 1,2-dichloropropane. Docking calculations on the enzyme in the absence of active site water molecules and halide ions confirm that these compounds could bind productively. However, when these moieties were included in the calculations, they bound in a manner similar to that observed in the crystal structure. These data provide an explanation for the low activity of LinB with small, chlorinated alkanes and show the importance of active site water molecules and reaction products in molecular docking.     

Haloalkane dehalogenase LinB from Sphingomonas paucimobilis UT26: X-ray crystallographic studies of dehalogenation of brominated substrates

The haloalkane dehalogenases are detoxifying enzymes that convert a broad range of halogenated substrates to the corresponding alcohols. Complete crystal structures of haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB), and complexes of LinB with 1,2-propanediol/1-bromopropane-2-ol and 2-bromo-2-propene-1-ol, products of debromination of 1,2-dibromopropane and 2,3-dibromopropene, respectively, were determined from 1.8 A resolution X-ray diffraction data. Published structures of native LinB and its complex with 1,3-propanediol [Marek et al. (2000) Biochemistry 39, 14082-14086] were reexamined. The full and partial debromination of 1,2-dibromopropane and 2,3-dibromopropene, respectively, conformed to the observed general trend that the sp(3)-hybridized carbon is the predominant electrophilic site for the S(N)2 bimolecular nucleophilic substitution in dehalogenation reaction. The 2-bromo-2-propene-1-ol product of 2,3-dibromopropene dehalogenation in crystal was positively identified by the gas chromatography-mass spectroscopy (GC-MS) technique. The 1,2-propanediol and 1-bromopropane-2-ol products of 1,2-dibromopropane dehalogenation in crystal were also supported by the GC-MS identification. Comparison of native LinB with its complexes showed high flexibility of residues 136-157, in particular, Asp146 and Glu147, from the cap domain helices alpha(4) and alpha(5)('). Those residues were shifted mainly in direction toward the ligand molecules in the complex structures. It seems the cap domain moves nearer to the core squeezing substrate into the active center closer to the catalytic triad. This also leads to slight contraction of the whole complex structures. The flexibility detected by crystallographic analysis is in remarkable agreement with flexibility observed by molecular dynamic simulations.     

Exploring the binding sites of the haloalkane dehalogenase DhlA from Xanthobacter autotrophicus GJ10

The catalytic site of haloalkane dehalogenase DhlA is buried more than 10 A from the protein surface. While potential access channels to this site have been reported, the precise mechanism of substrate import and product export is still unconfirmed. We used computational methods to examine surface pockets and their putative roles in ligand access to and from the catalytic site. Computational solvent mapping moves small organic molecule as probes over the protein surface in order to identify energetically favorable sites, that is, regions that tend to bind a variety of molecules. The mapping of three DhlA structures identifies seven such regions, some of which have been previously suggested to be involved in the binding and the import/export of substrates or products. These sites are the active site, the putative entrance of the channel leading to the active site, two pockets that bind Br- ions, a pocket in the slot region, and two additional sites between the main domain and the cap of DhlA. We also performed mapping and free energy analysis of the DhlA structures using the substrate, 1,2-dichloroethane, and halide ions as probes. The findings were compared to crystallographic data and to results obtained by CAVER, a program developed for finding routes from protein clefts and cavities to the surface. Solvent mapping precisely reproduced all three Br- binding sites identified by protein crystallography and the openings to four channels found by CAVER. The analyses suggest that (i) the active site has the highest affinity for the substrate molecule, (ii) the substrate initially binds at the entrance of the main tunnel, (iii) the site Br2, close to the entrance, is likely to serve as an intermediate binding site in product export, (iv) the site Br3, induced in the structure at high concentrations of Br-, could be part of an auxiliary route for product release, and (v) three of the identified sites are likely to be entrances of water-access channels leading to the active site. For comparison, we also mapped haloalkane dehalogenases DhaA and LinB, both of which contain significantly larger and more solvent accessible binding sites than DhlA. The mapping of DhaA and LinB places the majority of probes in the active site, but most of the other six regions consistently identified in DhlA were not observed, suggesting that the more open active site eliminates the need for intermediate binding sites for the collision complex seen in DhlA.     

Biodegradation of 1,2,3-trichloropropane through directed evolution and heterologous expression of a haloalkane dehalogenase gene

Using a combined strategy of random mutagenesis of haloalkane dehalogenase and genetic engineering of a chloropropanol-utilizing bacterium, we constructed an organism that is capable of growth on 1,2,3-trichloropropane (TCP). This highly toxic and recalcitrant compound is a waste product generated from the manufacture of the industrial chemical epichlorohydrin. Attempts to select and enrich bacterial cultures that can degrade TCP from environmental samples have repeatedly been unsuccessful, prohibiting the development of a biological process for groundwater treatment. The critical step in the aerobic degradation of TCP is the initial dehalogenation to 2,3-dichloro-1-propanol. We used random mutagenesis and screening on eosin-methylene blue agar plates to improve the activity on TCP of the haloalkane dehalogenase from Rhodococcus sp. m15-3 (DhaA). A second-generation mutant containing two amino acid substitutions, Cys176Tyr and Tyr273Phe, was nearly eight times more efficient in dehalogenating TCP than wild-type dehalogenase. Molecular modeling of the mutant dehalogenase indicated that the Cys176Tyr mutation has a global effect on the active-site structure, allowing a more productive binding of TCP within the active site, which was further fine tuned by Tyr273Phe. The evolved haloalkane dehalogenase was expressed under control of a constitutive promoter in the 2,3-dichloro-1-propanol-utilizing bacterium Agrobacterium radiobacter AD1, and the resulting strain was able to utilize TCP as the sole carbon and energy source. These results demonstrated that directed evolution of a key catabolic enzyme and its subsequent recruitment by a suitable host organism can be used for the construction of bacteria for the degradation of a toxic and environmentally recalcitrant chemical.     

Comparative studies of genes encoding thermostable L-2-halo acid dehalogenase from Pseudomonas sp. strain YL, other dehalogenases, and two related hypothetical proteins from Escherichia coli.

We have determined the nucleotide sequence of the gene encoding thermostable L-2-halo acid dehalogenase (L-DEX) from the 2-chloroacrylate-utilizable bacterium Pseudomonas sp. strain YL. The open reading frame consists of 696 nucleotides corresponding to 232 amino acid residues. The protein molecular weight was estimated to be 26,179, which was in good agreement with the subunit molecular weight of the enzyme. The gene was efficiently expressed in the recombinant Escherichia coli cells: the amount of L-DEX corresponds to about 49% of the total soluble proteins. The predicted amino acid sequence showed a high level of similarity to those of L-DEXs from other bacterial strains and haloacetate dehalogenase H-2 from Moraxella sp. strain B (38 to 57% identity) but a very low level of similarity to those of haloacetate dehalogenase H-1 from Moraxella sp. strain B (10%) and haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 (12%). By searching the protein amino acid sequence database, we found two E. coli hypothetical proteins similar to the Pseudomonas sp. strain YL L-DEX (21 to 22%).     

Cloning and sequencing of a dehalogenase gene encoding an enzyme with hydrolase activity involved in the degradation of gamma-hexachlorocyclohexane in Pseudomonas paucimobilis.

In Pseudomonas paucimobilis UT26, gamma-hexachlorocyclohexane (gamma-HCH) is converted by two steps of dehydrochlorination to a chemically unstable intermediate, 1,3,4,6-tetrachloro-1,4-cyclohexadiene (1,4-TCDN), which is then metabolized to 2,5-dichloro-2,5-cyclohexadiene-1,4-diol (2,5-DDOL) by two steps of hydrolytic dehalogenation via the chemically unstable intermediate 2,4,5-trichloro-2,5-cyclohexadiene-1-ol (2,4,5-DNOL). To clone a gene encoding the enzyme responsible for the conversion of the chemically unstable intermediates 1,4-TCDN and 2,4,5-DNOL, a genomic library of P. paucimobilis UT26 was constructed in Pseudomonas putida PpY101LA into which the linA gene had been introduced by Tn5. An 8-kb BglII fragment from one of the cosmid clones, which could convert gamma-HCH to 2,5-DDOL, was subcloned, and subsequent deletion analyses revealed that a ca. 1.1-kb region was responsible for the activity. Nucleotide sequence analysis revealed an open reading frame (designated the linB gene) of 885 bp within the region. The deduced amino acid sequence of LinB showed significant similarity to hydrolytic dehalogenase, DhlA (D. B. Janssen, F. Pries, J. van der Ploeg, B. Kazemier, P. Terpstra, and B. Witholt, J. Bacteriol. 171:6791-6799, 1989). The protein product of the linB gene was 32 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Not only 1-chlorobutane but also 1-chlorodecane (C10) and 2-chlorobutane, which are poor substrates for other dehalogenases, were good substrates for LinB, suggesting that LinB may be a member of haloalkane dehalogenases with broad-range specificity for substrates.     

Comparative binding energy analysis of the substrate specificity of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10

Comparative binding energy (COMBINE) analysis was conducted for 18 substrates of the haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 (DhlA): 1-chlorobutane, 1-chlorohexane, dichloromethane, 1,2-dichloroethane, 1,2-dichloropropane, 2-chloroethanol, epichlorohydrine, 2-chloroacetonitrile, 2-chloroacetamide, and their brominated analogues. The purpose of the COMBINE analysis was to identify the amino acid residues determining the substrate specificity of the haloalkane dehalogenase. This knowledge is essential for the tailoring of this enzyme for biotechnological applications. Complexes of the enzyme with these substrates were modeled and then refined by molecular mechanics energy minimization. The intermolecular enzyme-substrate energy was decomposed into residue-wise van der Waals and electrostatic contributions and complemented by surface area dependent and electrostatic desolvation terms. Partial least-squares projection to latent structures analysis was then used to establish relationships between the energy contributions and the experimental apparent dissociation constants. A model containing van der Waals and electrostatic intermolecular interaction energy contributions calculated using the AMBER force field explained 91% (73% cross-validated) of the quantitative variance in the apparent dissociation constants. A model based on van der Waals intermolecular contributions from AMBER and electrostatic interactions derived from the Poisson-Boltzmann equation explained 93% (74% cross-validated) of the quantitative variance. COMBINE models predicted correctly the change in apparent dissociation constants upon single-point mutation of DhlA for six enzyme-substrate complexes. The amino acid residues contributing most significantly to the substrate specificity of DhlA were identified; they include Asp124, Trp125, Phe164, Phe172, Trp175, Phe222, Pro223, and Leu263. These residues are suitable targets for modification by site-directed mutagenesis.     

Degradation of beta-hexachlorocyclohexane by haloalkane dehalogenase LinB from gamma-hexachlorocyclohexane-utilizing bacterium Sphingobium sp. MI1205

The technical formulation of hexachlorocyclohexane (HCH) mainly consists of the insecticidal γ-isomer and noninsecticidal α-, β-, and δ-isomers, among which β-HCH is the most recalcitrant and has caused serious environmental problems. A γ-HCH-utilizing bacterial strain, Sphingobium sp. MI1205, was isolated from soil which had been contaminated with HCH isomers. This strain degraded β-HCH more rapidly than the well-characterized γ-HCH-utilizing strain Sphingobium japonicum UT26. In MI1205, β-HCH was converted to 2,3,5,6-tetrachlorocyclohexane-1,4-diol (TCDL) via 2,3,4,5,6-pentachlorocyclohexanol (PCHL). A haloalkane dehalogenase LinB (LinB_MI) that is 98% identical (seven amino-acid differences among 296 amino acids) to LinB from UT26 (LinB_UT) was identified as an enzyme responsible for the two-step conversion of β-HCH to TCDL. This property of LinB_MI contrasted with that of LinB_UT, which catalyzed only the first step conversion of β-HCH to PCHL. Site-directed mutagenesis and computer modeling suggested that two of the seven different amino acid residues (V134 and H247) forming a catalytic pocket of LinB are important for the binding of PCHL in an orientation suitable for the reaction in LinB_MI. However, mutagenesis also indicated the involvement of other residues for the activity unique to LinB_MI. Sequence analysis revealed that MI1205 possesses the IS6100-flanked cluster that contains two copies of the linB _MI gene. This cluster is identical to the one located on the exogenously isolated plasmid pLB1, suggesting that MI1205 had recruited the linB genes by a horizontal transfer event.     

Characterization of the haloacid dehalogenase from Xanthobacter autotrophicus GJ10 and sequencing of the dhlB gene.

The haloacid dehalogenase of the 1,2-dichloroethane-utilizing bacterium Xanthobacter autotrophicus GJ10 was purified from a mutant with an eightfold increase in expression of the enzyme. The mutant was obtained by selecting for enhanced resistance to monobromoacetate. The enzyme was purified through (NH4)2SO4 fractionation, DEAE-cellulose chromatography, and hydroxylapatite chromatography. The molecular mass of the protein was 28 kDa as determined with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and 36 kDa as determined with gel filtration on Superose 12 fast protein liquid chromatography. The enzyme was active with 2-halogenated carboxylic acids and converted only the L-isomer of 2-chloropropionic acid with inversion of configuration to produce D-lactate. The activity of the enzyme was not readily influenced by thiol reagents. The gene encoding the haloacid dehalogenase (dhlB) was cloned and could be allocated to a 6.5-kb EcoRI-BglII fragment. Part of this fragment was sequenced, and the dhlB open reading frame was identified by comparison with the N-terminal amino acid sequence of the protein. The gene was found to encode a protein of 27,433 Da that showed considerable homology (60.5 and 61.0% similarity) with the two other haloacid dehalogenases sequenced to date but not with the haloalkane dehalogenase from X. autotrophicus GJ10.     

Halide-stabilizing residues of haloalkane dehalogenases studied by quantum mechanic calculations and site-directed mutagenesis

Haloalkane dehalogenases catalyze cleavage of the carbon-halogen bond in halogenated aliphatic compounds, resulting in the formation of an alcohol, a halide, and a proton as the reaction products. Three structural features of haloalkane dehalogenases are essential for their catalytic performance: (i) a catalytic triad, (ii) an oxyanion hole, and (iii) the halide-stabilizing residues. Halide-stabilizing residues are not structurally conserved among different haloalkane dehalogenases. The level of stabilization of the transition state structure of S(N)2 reaction and halide ion provided by each of the active site residues in the enzymes DhlA, LinB, and DhaA was quantified by quantum mechanic calculations. The residues that significantly stabilize the halide ion were assigned as the primary (essential) or the secondary (less important) halide-stabilizing residues. Site-directed mutagenesis was conducted with LinB enzyme to confirm location of its primary halide-stabilizing residues. Asn38Asp, Asn38Glu, Asn38Phe, Asn38Gln, Trp109Leu, Phe151Leu, Phe151Trp, Phe151Tyr, and Phe169Leu mutants of LinB were constructed, purified, and kinetically characterized. The following active site residues were classified as the primary halide-stabilizing residues: Trp125 and Trp175 of DhlA; Asn38 and Trp109 of LinB; and Asn41 and Trp107 of DhaA. All these residues make a hydrogen bond with the halide ion released from the substrate molecule, and their substitution results in enzymes with significantly modified catalytic properties. The following active site residues were classified as the secondary halide-stabilizing residues: Phe172, Pro223, and Val226 of DhlA; Trp207, Pro208, and Ile211 of LinB; and Phe205, Pro206, and Ile209 of DhaA. The differences in the halide stabilizing residues of three haloalkane dehalogenases are discussed in the light of molecular adaptation of these enzymes to their substrates.     

Modification of activity and specificity of haloalkane dehalogenase from Sphingomonas paucimobilis UT26 by engineering of its entrance tunnel

Structural comparison of three different haloalkane dehalogenases suggested that substrate specificity of these bacterial enzymes could be significantly influenced by the size and shape of their entrance tunnels. The surface residue leucine 177 positioned at the tunnel opening of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26 was selected for modification based on structural and phylogenetic analysis; the residue partially blocks the entrance tunnel, and it is the most variable pocket residue in haloalkane dehalogenase-like proteins with nine substitutions in 14 proteins. Mutant genes coding for proteins carrying all possible substitutions in position 177 were constructed by site-directed mutagenesis and heterologously expressed in Escherichia coli. In total, 15 active protein variants were obtained, suggesting a relatively high tolerance of the site for the introduction of mutations. Purified protein variants were kinetically characterized by determination of specific activities with 12 halogenated substrates and steady-state kinetic parameters with two substrates. The effect of mutation on the enzyme activities varied dramatically with the structure of the substrates, suggesting that extrapolation of one substrate to another may be misleading and that a systematic characterization of the protein variants with a number of substrates is essential. Multivariate analysis of activity data revealed that catalytic activity of mutant enzymes generally increased with the introduction of small and nonpolar amino acid in position 177. This result is consistent with the phylogenetic analysis showing that glycine and alanine are the most commonly occurring amino acids in this position among haloalkane dehalogenases. The study demonstrates the advantages of using rational engineering to develop enzymes with modified catalytic properties and substrate specificities. The strategy of using site-directed mutagenesis to modify a specific entrance tunnel residue identified by structural and phylogenetic analyses, rather than combinatorial screening, generated a high percentage of viable mutants.     

Crystal structure of haloalkane dehalogenase LinB from Sphingomonas paucimobilis UT26 at 0.95 A resolution: dynamics of catalytic residues

We present the structure of LinB, a 33-kDa haloalkane dehalogenase from Sphingomonas paucimobilis UT26, at 0.95 A resolution. The data have allowed us to directly observe the anisotropic motions of the catalytic residues. In particular, the side-chain of the catalytic nucleophile, Asp108, displays a high degree of disorder. It has been modeled in two conformations, one similar to that observed previously (conformation A) and one strained (conformation B) that approached the catalytic base (His272). The strain in conformation B was mainly in the C(alpha)-C(beta)-C(gamma) angle (126 degrees ) that deviated by 13.4 degrees from the "ideal" bond angle of 112.6 degrees. On the basis of these observations, we propose a role for the charge state of the catalytic histidine in determining the geometry of the catalytic residues. We hypothesized that double-protonation of the catalytic base (His272) reduces the distance between the side-chain of this residue and that of the Asp108. The results of molecular dynamics simulations were consistent with the structural data showing that protonation of the His272 side-chain nitrogen atoms does indeed reduce the distance between the side-chains of the residues in question, although the simulations failed to demonstrate the same degree of strain in the Asp108 C(alpha)-C(beta)-C(gamma) angle. Instead, the changes in the molecular dynamics structures were distributed over several bond and dihedral angles. Quantum mechanics calculations on LinB with 1-chloro-2,2-dimethylpropane as a substrate were performed to determine which active site conformations and protonation states were most likely to result in catalysis. It was shown that His272 singly protonated at N(delta)(1) and Asp108 in conformation A gave the most exothermic reaction (DeltaH = -22 kcal/mol). With His272 doubly protonated at N(delta)(1) and N(epsilon)(2), the reactions were only slightly exothermic or were endothermic. In all calculations starting with Asp108 in conformation B, the Asp108 C(alpha)-C(beta)-C(gamma) angle changed during the reaction and the Asp108 moved to conformation A. The results presented here indicate that the positions of the catalytic residues and charge state of the catalytic base are important for determining reaction energetics in LinB.     

Enantioselectivity of haloalkane dehalogenase LinB on the degradation of 1,2-dichloropropane: A QM/MM study

The hydrolysis dechlorination mechanism of a chiral organochlorine pollutant, 1,2-dichloropropane (DCP), catalyzed by haloalkane dehalogenase LinB has been investigated by using a combined quantum mechanics/molecular mechanics method. LinB was confirmed to be enantioselective towards the catabolism of the racemic mixture. Based on the S_N2 nucleophilic substitution mechanism, the dechlorination process was identified as the rate-determining step in LinB-catalyzed degradation of 1,2-dichloropropane, the Boltzmann-weighted average potential barrier of which is 18.8 kcal/mol for the (R)-isomer and 24.0 kcal/mol for the (S)-isomer. A particular water molecule near (S)-DCP in the reaction system can strongly disturb the dechlorination process, which can account for the enantioselectivity of LinB. Further electrostatic influence analysis indicates that proper mutation of Gly37 may improve the catalytic efficiency of LinB towards DCP.