pH-Dependent Conformational Transitions in Conalbumin (Ovotransferrin), a Metalloproteinase from Hen Egg White

Acid unfolding pathway of conalbumin (CA), a monomeric glycoprotein from hen egg white, has been investigated using far- and near-UV CD spectroscopy, intrinsic fluorescence emission, extrinsic fluorescence probe 1-anilino-8-napthalene sulfonate (ANS) and dynamic light scattering (DLS). We observe pH-dependent changes in secondary and tertiary structure of CA. It has native-like α-helical secondary structure at pH 4.0 but loss structure at pH 3.0. The CA existed exclusively as a pre-molten globule state and molten globule state in solution at pH 4.0 and pH 3.0, respectively. The effect of pH on the conformation and thermostability of CA points toward its heat resistance at neutral pH. DLS results show that MG state existed as compact form in aqueous solutions with hydrodynamic radii of 4.7 nm. Quenching of tryptophan fluorescence by acrylamide further confirmed the accumulation of an intermediate state, partly unfolded, in-between native and unfolded states.     

A conformational switch controlling HIV-1 morphogenesis

Assembly of infectious human immunodeficiency virus type 1 (HIV-1) proceeds in two steps. Initially, an immature virus with a spherical capsid shell consisting of uncleaved Gag polyproteins is formed. Extracellular proteolytic maturation causes rearrangement of the inner virion structure, leading to the conical capsid of the infectious virus. Using an in vitro assembly system, we show that the same HIV-1 Gag-derived protein can form spherical particles, virtually indistinguishable from immature HIV-1 capsids, as well as tubular or conical particles, resembling the mature core. The assembly phenotype could be correlated with differential binding of the protein to monoclonal antibodies recognizing epitopes in the HIV-1 capsid protein (CA), suggesting distinct conformations of this domain. Only tubular and conical particles were observed when the protein lacked spacer peptide SP1 at the C-terminus of CA, indicating that SP1 may act as a molecular switch, whose presence determines spherical capsid formation, while its cleavage leads to maturation.     

Synchrotron radiation solution X-ray scattering study of the pH dependence of the quaternary structure of yeast pyruvate decarboxylase.

The pH dependence of the quaternary structure of pyruvate decarboxylase from yeast was studied in the range 6.2 less than pH less than 8.4. There is an equilibrium with a midpoint around pH 7.5 between tetramers and dimers, and the catalytic activity of the enzyme depends on the volume fraction of tetramer. This equilibrium may provide an additional regulating mechanism besides substrate activation since accumulation of pyruvate would lead to a reduction in pH and hence an increase of the concentration of the catalytically active tetramer. Radiation damage during the X-ray scattering experiments results in a shift of this equilibrium and in the formation of octamers. These effects could be circumvented and analyzed using experimental and data processing methods which can be readily applied to other radiation-sensitive systems. The low-resolution shapes of the dimers and tetramers were determined from the scattering curves using spherical harmonics. The results indicate that a conformational change must occur in the dimers upon formation of the tetramers, in agreement with earlier circular dichroism measurements.     

The leucine rich amelogenin protein (LRAP) adsorbs as monomers or dimers onto surfaces

Amelogenin is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin proteins onto substrates is very important because protein–surface interactions are critical to its function. We have previously used LRAP, a splice variant of amelogenin, as a model protein for the full-length amelogenin in solid-state NMR and neutron reflectivity studies at interfaces. In this work, we examined the adsorption behavior of LRAP in greater detail using model self-assembled monolayers containing COOH, CH₃, and NH₂ end groups as substrates. Dynamic light scattering (DLS) experiments indicated that LRAP in phosphate buffered saline and solutions containing low concentrations of calcium and phosphate consisted of aggregates of nanospheres. Null ellipsometry and atomic force microscopy (AFM) were used to study protein adsorption amounts and quaternary structures on the surfaces. Relatively high amounts of adsorption occurred onto the CH₃ and NH₂ surfaces from both buffer solutions. Adsorption was also promoted onto COOH surfaces only when calcium was present in the solutions suggesting an interaction that involves calcium bridging with the negatively charged C-terminus. The ellipsometry and AFM studies revealed that LRAP adsorbed onto the surfaces as small subnanosphere-sized structures such as monomers or dimers. We propose that the monomers/dimers were present in solution even though they were not detected by DLS or that they adsorbed onto the surfaces by disassembling or “shedding” from the nanospheres that are present in solution. This work reveals the importance of small subnanosphere-sized structures of LRAP at interfaces.     

Nucleic acid-independent retrovirus assembly can be driven by dimerization

The Gag protein of retroviruses alone can polymerize into regular virus-like particles (VLPs) both in vitro and in vivo. In most circumstances the capsid (CA) and nucleocapsid (NC) domains of Gag as well as some form of nucleic acid are required for this process. The mechanism by which NC-nucleic acid interaction promotes assembly has remained obscure. We show here that while deletion of the NC domain of Rous sarcoma virus Gag abolishes formation and budding of VLPs at the plasma membranes of baculovirus-infected insect cells, replacement of NC with a dimer-forming leucine zipper domain restores budding of spherical particles morphologically similar to wild-type VLPs. The positioning of the dimerization domain appears to be critical for proper assembly, as the insertion of a 5-amino-acid flexible linker upstream of the zipper domain leads to budding of tubular rather than spherical particles. Similar tubular particles are formed when the same linker is inserted upstream of NC. The tubes are morphologically distinct from tubes formed when the p10 domain upstream of CA is deleted. The fact that a foreign dimerization domain can functionally mimic NC suggests that the role of nucleic acid in retroviral assembly is not to serve as a scaffold but rather to promote the formation of Gag dimers, which are critical intermediates in the polymerization of the Gag shell.     

Kinetic study of the self-assembly of brome mosaic virus capsid

The protein of brome mosaic virus can self assemble in-vitro to form empty capsids. In the absence of RNA at pH=7 and 0.5 M KCl there is a dynamic equilibrium between monomers and oligomers. At pH=5 the protein assembles into empty capsids. The kinetics of this assembly, triggered by pH jump from neutral to acidic pH, was investigated by X-ray and light scattering.Cryoelectron microscopy observations suggested that reconstitution is achieved by progressive incorporation of small building units in a spherical shell. This hypothesis has been tested by the analysis of the scattering data in terms of four classes of incomplete capsids represented as spherical shells with holes of different sizes. The time dependence of the population of each class was determined by a least squares analysis of the experimental data. Although the basic polymerizing unit has not been uniquely characterized, the results are compatible with a dimer for this species. The characteristic times for capsid assembly are found to vary as the inverse of the square of the concentration.     

Phage P22 procapsids equilibrate with free coat protein subunits

Assembly of bacteriophage P22 procapsids has long served as a model for assembly of spherical viruses. Historically, assembly of viruses has been viewed as a non-equilibrium process. Recently alternative models have been developed that treat spherical virus assembly as an equilibrium process. Here we have investigated whether P22 procapsid assembly reactions achieve equilibrium or are irreversibly trapped. To assemble a procapsid-like particle in vitro, pure coat protein monomers are mixed with scaffolding protein. We show that free subunits can exchange with assembled structures, indicating that assembly is a reversible, equilibrium process. When empty procapsid shells (procapsids with the scaffolding protein stripped out) were diluted so that the concentration was below the dissociation constant ( approximately 5 microM) for coat protein monomers, free monomers were detected. The released monomers were assembly-competent; when NaCl was added to metastable partial capsids that were aged for an extended period, the released coat subunits were able to rapidly re-distribute from the partial capsids and form whole procapsids. Lastly, radioactive monomeric coat subunits were able to exchange with the subunits from empty procapsid shells. The data presented illustrate that coat protein monomers are able to dissociate from procapsids in an active state, that assembly of procapsids is consistent with reactions at equilibrium and that the reaction follows the law of mass action.     

The structure of bovine IF(1), the regulatory subunit of mitochondrial F-ATPase.

In mitochondria, the hydrolytic activity of ATP synthase is regulated by an inhibitor protein, IF(1). Its binding to ATP synthase depends on pH, and below neutrality, IF(1) is dimeric and forms a stable complex with the enzyme. At higher pH values, IF(1) forms tetramers and is inactive. In the 2.2 A structure of the bovine IF(1) described here, the four monomers in the asymmetric unit are arranged as a dimer of dimers. Monomers form dimers via an antiparallel alpha-helical coiled coil in the C-terminal region. Dimers are associated into oligomers and form long fibres in the crystal lattice, via coiled-coil interactions in the N-terminal and inhibitory regions (residues 14-47). Therefore, tetramer formation masks the inhibitory region, preventing IF(1) binding to ATP synthase.     

The influence of the effectors of yeast pyruvate decarboxylase (PDC) on the conformation of the dimers and tetramers and their pH-dependent equilibrium

The influence of effectors of yeast pyruvate decarboxylase, phosphate, pyruvamide, thiamin diphosphate and Mg⁺⁺, on the pH-dependent equilibrium between dimers and tetramers was studied by synchrotron radiation X-ray solution scattering. Thiamin diphosphate and phosphate shift the equilibrium to higher pH values without altering the structure of the oligomers. Pyruvamide, a substrate analogue activator, induces a significant change in the structure of the tetramer. By eliminating radiation damage by addition of dithioerythrol to the buffers, the scattering curves could be measured accurately over a large angular range. They were expanded in terms of spherical harmonics to obtain the shapes of the dimers and tetramers with higher resolution than was hitherto possible. This also allowed us to position the dimers, which are centrosymmetric at low resolution, in the tetramers which have 222 symmetry. The results indicate that addition of pyruvamide results in a less compact tetramer owing to structural changes in the dimers and to their displacements.On leave from the Institute of Crystallography, Russian Academy of Sciences, 117333 Moscow, Leninsky pr. 59, Russia Correspondence to: M. H. J. Koch     

Purification and characterization of a vaterite-inducing peptide, pelovaterin, from the eggshells of Pelodiscus sinensis (Chinese soft-shelled turtle)

Proteins play a crucial role in the biomineralization of hard tissues such as eggshells. We report here the purification, characterization, and in vitro mineralization studies of a peptide, pelovaterin, extracted from eggshells of a soft-shelled turtle. It is a glycine-rich peptide with 42 amino acid residues and three disulfide bonds. When tested in vitro, the peptide induced the formation of a metastable vaterite phase. The floret-shaped morphology formed at a lower concentration ( approximately 1 microM) was transformed into spherical particles at higher concentrations (>500 microM). The solution properties of the peptide are investigated by circular dichroism (CD), fluorescence emission spectroscopy, and dynamic light scattering (DLS) experiments. The conformation of pelovaterin changed from an unordered state at a low concentration to a beta-sheet structure at high concentrations. Fluorescence emission studies indicated that the quantum yield is significantly decreased at higher concentrations, accompanied by a blue shift in the emission maximum. At higher concentrations a red-edge excitation shift was observed, indicating the restricted mobility of the peptide. On the basis of these observations, we discuss the presence of a peptide concentration-dependent monomer-multimer equilibrium in solution and its role in controlling the nucleation, growth, and morphology of CaCO(3) crystals. This is the first peptide known to induce the nucleation and stabilization of the vaterite phase in solution.     

pH-dependent conformational change of gastric mucin leads to sol-gel transition

We present dynamic light scattering (DLS) and hydrophobic dye-binding data in an effort to elucidate a molecular mechanism for the ability of gastric mucin to form a gel at low pH, which is crucial to the barrier function of gastric mucus. DLS measurements of dilute mucin solutions were not indicative of intermolecular association, yet there was a steady fall in the measured diffusion coefficient with decreasing pH, suggesting an apparent increase in size. Taken together with the observed rise in depolarized scattering ratio with decreasing pH, these results suggest that gastric mucin undergoes a conformational change from a random coil at pH >/= 4 to an anisotropic, extended conformation at pH < 4. The increased binding of mucin to hydrophobic fluorescent with decreasing pH indicates that the change to an extended conformation is accompanied by exposure of hydrophobic binding sites. In concentrated mucin solutions, the structure factor S(q, t) derived from DLS measurements changed from a stretched exponential decay at pH 7 to a power-law decay at pH 2, which is characteristic of a sol-gel transition. We propose that the conformational change facilitates cross-links among mucin macromolecules through hydrophobic interactions at low pH, which in turn leads to a sol-gel transition when the mucin solution is sufficiently concentrated.     

Role of the connectivity of secondary structure segments in the folding of alpha(1)-antitrypsin

The native form of serpins (serine protease inhibitors) is metastable, which is critical to their biological functions. Spontaneous conversion from the native form of serpins into a more stable conformation, called the "latent" form, is restricted. To examine whether the connectivity of strand 1 of beta-sheet C to the hydrophobic core is critical to the serpin's preferential folding to the metastable native conformation, we designed a circularly-permuted mutant of alpha(1)-antitrypsin, the prototype serpin, in which strand 1C is disconnected from the hydrophobic core. Conformation of the circular permutant was similar to that of the latent form, as revealed by equilibrium unfolding, limited proteolysis, and spectroscopic properties. Our results support the notion that rapid folding of the hydrophobic core with concomitant incorporation of strand 1C into beta-sheet C traps the serpin molecule into its native metastable conformation.     

Ligand Binding Turns Moth Pheromone-binding Protein into a pH Sensor: EFFECT ON THE ANTHERAEA POLYPHEMUS PBP1 CONFORMATION*

In moths, pheromone-binding proteins (PBPs) are responsible for the transport of the hydrophobic pheromones to the membrane-bound receptors across the aqueous sensillar lymph. We report here that recombinant Antheraea polyphemus PBP1 (ApolPBP1) picks up hydrophobic molecule(s) endogenous to the Escherichia coli expression host that keeps the protein in the “open” (bound) conformation at high pH but switches to the “closed” (free) conformation at low pH. This finding has bearing on the solution structures of undelipidated lepidopteran moth PBPs determined thus far. Picking up a hydrophobic molecule from the host expression system could be a common feature for lipid-binding proteins. Thus, delipidation is critical for bacterially expressed lipid-binding proteins. We have shown for the first time that the delipidated ApolPBP1 exists primarily in the closed form at all pH levels. Thus, current views on the pH-induced conformational switch of PBPs hold true only for the ligand-bound open conformation of the protein. Binding of various ligands to delipidated ApolPBP1 studied by solution NMR revealed that the protein in the closed conformation switches to the open conformation only at or above pH 6.0 with a protein to ligand stoichiometry of ∼1:1. Mutation of His⁷⁰ and His⁹⁵ to alanine drives the equilibrium toward the open conformation even at low pH for the ligand-bound protein by eliminating the histidine-dependent pH-induced conformational switch. Thus, the delipidated double mutant can bind ligand even at low pH in contrast to the wild type protein as revealed by fluorescence competitive displacement assay using 1-aminoanthracene and solution NMR.     

Dynamic light scattering and circular dichroism studies on heat-induced gelation of hard-keratin protein aqueous solutions

Animal hairs consist of aggregates of dead cells filled with keratin protein gel. We succeeded in preparing water-soluble hard-keratin proteins and reconstructing the keratin gels by heat-induced disulfide linkages in vitro. Here, the roles of intermolecular hydrophobic interaction and disulfide bonding between the proteins in the gel were discussed. Water-soluble keratin proteins consisting of mixtures of type I ( approximately 48 kDa) and type II ( approximately 61 kDa) were prepared from wool fibers as S-carboxymethyl alanyl disulfide keratin (CMADK). The gelation was achieved by heating an aqueous solution containing at least 0.8 wt % CMADK at 100 degrees C. CMADK solutions with different urea or N-ethylmaleimide concentrations or pH were exposed to dynamic light scattering (DLS) and circular dichroism (CD). DLS clarified the gelation point of CMADK solutions and provided information on the changes in keratin cluster size. DLS suggested two types of gelation mechanism. One was the regenerated chemical disulfide bonding between keratins from CMAD parts of chains. After the gel formed, this bond became important to maintain the gel structure. The other was the physical assembly due to hydrophobic interaction between alpha-helix parts of keratin chains. This hydrophobic assembly also played an important role during gelation. CD confirmed a conformational change in the keratin protein, resulting heat-induced gelation. CD clarified the relationship between keratin protein conformation and gelation, i.e., a rodlike conformation with many alpha-helix structures was necessary to associate keratin chains and form a gel network.     

Dynamic light scattering investigations of RecA self-assembly and interactions with single strand DNA

Dynamic light scattering (DLS) measurements were performed on self-assembled solutions of RecA as a function of assembly time under strand exchange ionic strength conditions (10 mM MgCl2, 65 mM NaCl, 10 mM Tris-HCl, pH = 7.5, 1 mM DTT, 3-4 microM RecA) in the absence of ATP. These measurements yield distributions of the translational diffusion coefficients of the changing populations of assembling protein species. Interpretations of results of DLS measurements are made in terms of model hydrodynamic calculations that indicate, under the solution conditions employed, the smallest fundamental quaternary subunit of RecA is a hexamer in a toroidal or lock-washer configuration. Interactions of M13mp19 circular single strand DNA (ssDNA) with RecA assembled to different stages were also investigated. Additions of ssDNA to self-assembled solutions of RecA acts to dissociate the associated structures into hexamer subunits. However, the effect of ssDNA on assembled RecA is highly dependent on the RecA self-assembly state. The longer the assembly time, the less reversible the self-assembled structures of RecA become. Binding isotherms of titrated mixtures of ssDNA with RecA self-assembled to various stages were also determined. Evaluated dissociation constants of RecA/ssDNA complexes were found to increase with increases of the associated state of RecA. These results strongly suggest that, under the solvent conditions employed, the active ssDNA binding form of RecA is a hexamer.     

Structure and dimerization of translation initiation factor aIF5B in solution

Translation initiation factor 5B (IF5B) is required for initiation of protein synthesis. The solution structure of archaeal IF5B (aIF5B) was analysed by small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) and was indicated to be in both monomeric and dimeric form. Sedimentation equilibrium (SE) analytical ultracentrifugation (AUC) of aIF5B indicated that aIF5B forms irreversible dimers in solution but only to a maximum of 5.0-6.8% dimer. Sedimentation velocity (SV) AUC at higher speed also indicated the presence of two species, and the sedimentation coefficients s(20,w)(0) were determined to be 3.64 and 5.51±0.29 S for monomer and dimer, respectively. The atomic resolution (crystallographic) structure of aIF5B (Roll-Mecak et al. [6]) was used to model monomer and dimer, and theoretical sedimentation coefficients for these models were computed (3.89 and 5.63 S, respectively) in good agreement with the sedimentation coefficients obtained from SV analysis. Thus, the structure of aIF5B in solution must be very similar to the atomic resolution structure of aIF5B. SAXS data were acquired in the same buffer with the addition of 2% glycerol to inhibit dimerization, and the resultant monomeric aIF5B in solution did indeed adopt a structure very similar to the one reported earlier for the protein in crystalline form. The p(r) function indicated an elongated conformation supported by a radius of gyration of 37.5±0.2 ? and a maximum dimension of ~130 ?. The effects of glycerol on the formation of dimers are discussed. This new model of aIF5B in solution shows that there are universal structural differences between aIF5B and the homologous protein IF2 from Escherichia coli.     

Role of the Rous sarcoma virus p10 domain in shape determination of gag virus-like particles assembled in vitro and within Escherichia coli

Purified retrovirus Gag proteins can assemble in vitro into virus-like particles (VLPs) in the presence of RNA. It was shown previously that a Rous sarcoma virus Gag protein missing only the protease domain forms spherical particles resembling immature virions lacking a membrane but that a similar protein missing the p10 domain forms tubular particles. Thus, p10 plays a role in spherical particle formation. To further study this shape-determining function, we dissected the p10 domain by mutagenesis and examined VLPs assembled within Escherichia coli or assembled in vitro from purified proteins. The results identified a minimal contiguous segment of 25 amino acid residues at the C terminus of p10 that is sufficient to restore efficient spherical assembly to a p10 deletion mutant. Random and site-directed mutations were introduced into this segment of polypeptide, and the shapes of particles formed in E. coli were examined in crude extracts by electron microscopy. Three phenotypes were observed: tubular morphology, spherical morphology, or no regular structure. While the particle morphology visualized in crude extracts generally was the same as that visualized for purified proteins, some tubular mutants scored as spherical when tested as purified proteins, suggesting that a cellular factor may also play a role in shape determination. We also examined the assembly properties of smaller Gag proteins consisting of the capsid protein-nucleocapsid protein (CA-NC) domains with short N-terminal extensions or deletions. Addition of one or three residues allowed CA-NC to form spheres instead of tubes in vitro, but the efficiency of assembly was extremely low. Deletion of the N-terminal residue(s) abrogated assembly. Taken together, these results imply that the N terminus of CA and the adjacent upstream 25 residues play an important role in the polymerization of the Gag protein.     

Structural mechanics of the pH-dependent activity of beta-carbonic anhydrase from Mycobacterium tuberculosis

Carbonic anhydrases catalyze the reversible hydration of carbon dioxide to form bicarbonate, a reaction required for many functions, including carbon assimilation and pH homeostasis. Carbonic anhydrases are divided into at least three classes and are believed to share a zinc-hydroxide mechanism for carbon dioxide hydration. beta-carbonic anhydrases are broadly spread among the domains of life, and existing structures from different organisms show two distinct active site setups, one with three protein coordinations to the zinc (accessible) and the other with four (blocked). The latter is believed to be inconsistent with the zinc-hydroxide mechanism. The Mycobacterium tuberculosis Rv3588c gene, shown to be required for in vivo growth of the pathogen, encodes a beta-carbonic anhydrase with a steep pH dependence of its activity, being active at pH 8.4 but not at pH 7.5. We have recently solved the structure of this protein, which was a dimeric protein with a blocked active site. Here we present the structure of the thiocyanate complexed protein in a different crystal form. The protein now forms distinct tetramers and shows large structural changes, including a carboxylate shift yielding the accessible active site. This structure demonstrated for the first time that a beta-carbonic anhydrase can switch between the two states. A pH-dependent dimer to tetramer equilibrium was also demonstrated by dynamic light scattering measurements. The data presented here, therefore, suggest a carboxylate shift on/off switch for the enzyme, which may, in turn, be controlled by a dimer-to-tetramer equilibrium.     

A Two-Pronged Structural Analysis of Retroviral Maturation Indicates that Core Formation Proceeds by a Disassembly-Reassembly Pathway Rather than a Displacive Transition

Retrovirus maturation involves sequential cleavages of the Gag polyprotein, initially arrayed in a spherical shell, leading to formation of capsids with polyhedral or conical morphology. Evidence suggests that capsids assemble de novo inside maturing virions from dissociated capsid (CA) protein, but the possibility persists of a displacive pathway in which the CA shell remains assembled but is remodeled. Inhibition of the final cleavage between CA and spacer peptide SP1/SP blocks the production of mature capsids. We investigated whether retention of SP might render CA assembly incompetent by testing the ability of Rous sarcoma virus (RSV) CA-SP to assemble in vitro into icosahedral capsids. Capsids were indeed assembled and were indistinguishable from those formed by CA alone, indicating that SP was disordered. We also used cryo-electron tomography to characterize HIV-1 particles produced in the presence of maturation inhibitor PF-46396 or with the cleavage-blocking CA5 mutation. Inhibitor-treated virions have a shell that resembles the CA layer of the immature Gag shell but is less complete. Some CA protein is generated but usually not enough for a mature core to assemble. We propose that inhibitors like PF-46396 bind to the Gag lattice where they deny the protease access to the CA-SP1 cleavage site and prevent the release of CA. CA5 particles, which exhibit no cleavage at the CA-SP1 site, have spheroidal shells with relatively thin walls. It appears that this lattice progresses displacively toward a mature-like state but produces neither conical cores nor infectious virions. These observations support the disassembly-reassembly pathway for core formation.