High copy display of large proteins on phage for functional selections

We have isolated mutations in the major coat protein P8 of M13 phage that greatly increase the surface display of monomeric or oligomeric proteins. The monomeric protein, human growth hormone (hGH), was fused to the N terminus of P8; libraries of P8 variants were constructed and variants that increased hGH display were selected by binding to the extracellular domain of the hGH receptor. The hGH-P8 fusion protein was found to be extremely tolerant of mutations, and a number of P8 variants were found that increased display to levels that improved detection of the hGH-P8 fusion by almost 100-fold. The increased display likely results from better accommodation of the hGH-P8 fusion protein in the phage coat. Using this high copy display format, it was possible for the first time to detect variants of hGH with very weak affinities for the hGHbp (K(d)>1 microM). The display of a tetrameric protein, streptavidin (approximately 50 kDa), was also increased, suggesting the approach may be general to many proteins. The initial product of a natural or invented selection from a naive library is often a weakly functioning protein. These improvements in high copy display should facilitate the broader goal for selection of proteins with novel functions.     

Comprehensive mutational analysis of the M13 major coat protein: improved scaffolds for C-terminal phage display

A peptide was fused to the C terminus of the M13 bacteriophage major coat protein (P8), and libraries of P8 mutants were screened to select for variants that displayed the peptide with high efficiency. Over 600 variants were sequenced to compile a comprehensive database of P8 sequence diversity compatible with assembly into the wild-type phage coat. The database reveals that, while the alpha-helical P8 molecule was highly tolerant to mutations, certain functional epitopes were required for efficient incorporation. Three hydrophobic epitopes were located approximately equidistantly along the length of the alpha-helix. In addition, a positively charged epitope was required directly opposite the most C-terminal hydrophobic epitope and on the same side as the other two epitopes. Both ends of the protein were highly tolerant to mutations, consistent with the use of P8 as a scaffold for both N and C-terminal phage display. Further rounds of selection were used to enrich for P8 variants that supported higher levels of C-terminal peptide display. The largest improvements in display resulted from mutations around the junction between P8 and the C-terminal linker, and additional mutations in the N-terminal region were selected for further improvements in display. The best P8 variants improved C-terminal display more than 100-fold relative to the wild-type, and these variants could support the simultaneous display of N and C-terminal fusions. These finding provide information on the requirements for filamentous phage coat assembly, and provide improved scaffolds for phage display technology.     

A minimized M13 coat protein defines the requirements for assembly into the bacteriophage particle

The M13 filamentous bacteriophage coat is a symmetric array of several thousand alpha-helical major coat proteins (P8) that surround the DNA core. P8 molecules initially reside in the host membrane and subsequently transition into their role as coat proteins during the phage assembly process. A comprehensive mutational analysis of the 50-residue P8 sequence revealed that only a small subset of the side-chains were necessary for efficient incorporation into a wild-type (wt) coat. In the three-dimensional structure of P8, these side-chains cluster into three functional epitopes: a hydrophobic epitope located near the N terminus and two epitopes (one hydrophobic and the other basic) located near the C terminus on opposite faces of the helix. The results support a model for assembly in which the incorporation of P8 is mediated by intermolecular interactions involving these functional epitopes. In this model, the N-terminal hydrophobic epitope docks with P8 molecules already assembled into the phage particle in the periplasm, and the basic epitope interacts with the acidic DNA backbone in the cytoplasm. These interactions could facilitate the transition of P8 from the membrane into the assembling phage, and the incorporation of a single P8 would be completed by the docking of additional P8 molecules with the second hydrophobic epitope at the C terminus. We constructed a minimized P8 that contained only nine non-Ala side-chains yet retained all three functional epitopes. The minimized P8 assembled into the wt coat almost as efficiently as wt P8, thus defining the minimum requirements for protein incorporation into the filamentous phage coat. The results suggest possible mechanisms of natural viral evolution and establish guidelines for the artificial evolution of improved coat proteins for phage display technology.     

Membrane insertion defects caused by positive charges in the early mature region of protein pIII of filamentous phage fd can be corrected by prlA suppressors.

The filamentous phage coat protein pIII has been used to display a variety of peptides and proteins to allow easy screening for desirable binding properties. We have examined the biological constraints that restrict the expression of short peptides located in the early mature region of pIII, adjacent to the signal sequence cleavage site. Many functionally defective pIII fusion proteins contained several positively charged amino acids in this region. These residues appear to inhibit proper insertion of pIII into the Escherichia coli inner membrane, blocking the assembly and extrusion of phage particles. Suppressor mutations in the prlA (secY) component of the protein export apparatus dramatically alleviate the phage growth defect caused by the positively charged residues. We conclude that insertion of pIII fusion proteins into the inner membrane can occur by a sec gene-dependent mechanism. The suppressor strains should be useful for increasing the diversity of peptides displayed on pIII in phage libraries.     

Comprehensive mutagenesis of the C-terminal domain of the M13 gene-3 minor coat protein: the requirements for assembly into the bacteriophage particle

Filamentous bacteriophage assemble at the host membrane in a non-lytic process; the gene-3 minor coat protein (P3) is required for release from the membrane and subsequently, for recognition and infection of a new host. P3 contains at least three distinct domains: two N-terminal domains that mediate host recognition and infection, and a C-terminal domain (P3-C) that is required for release from the host cell following phage assembly and contributes to the structural stability of the phage particle. A comprehensive mutational analysis of the 150 residue P3-C revealed that only 24 side-chains, located within the last 70 residues of sequence, were necessary for efficient incorporation into a wild-type coat. The results reveal that the requirements for the assembly of P3 into the phage particle are quite lax and involve only a few key side-chains. These findings shed light on the functional and structural requirements for filamentous phage assembly, and they may provide guidelines for the engineering of improved coat proteins as scaffolds for phage display technology.     

Adapter-Directed Display: A Modular Design for Shuttling Display on Phage Surfaces

A novel adapter-directed phage display system was developed with modular features. In this system, the target protein is expressed as a fusion protein consisting of adapter GR1 from the phagemid vector, while the recombinant phage coat protein is expressed as a fusion protein consisting of adapter GR2 in the helper phage vector. Surface display of the target protein is accomplished through specific heterodimerization of GR1 and GR2 adapters, followed by incorporation of the heterodimers into phage particles. A series of engineered helper phages were constructed to facilitate both display valency and formats, based on various phage coat proteins. As the target protein is independent of a specific phage coat protein, this modular system allows the target protein to be displayed on any given phage coat protein and allows various display formats from the same vector without the need for reengineering. Here, we demonstrate the shuttling display of a single-chain Fv antibody on phage surfaces between multivalent and monovalent formats, as well as the shuttling display of an antigen-binding fragment molecule on phage coat proteins pIII, pVII, and pVIII using the same phagemid vectors combined with different helper phage vectors. This adapter-directed display concept has been applied to eukaryotic yeast surface display and to a novel cross-species display that can shuttle between prokaryotic phage and eukaryotic yeast systems.     

Complete amino acid sequence of the coat protein of the Pseudomonas, aeruginosa RNA bacteriophage PP7

As part of a project intending to assess the evolutionary kinship between the RNA coliphages and RNA bacteriophages of other bacterial genera, we have sequenced the coat protein of $\text{Pseudomonas}\text{,}\text{aeruginosa}$ RNA phage PP7. Like the coat proteins of coliphages MS2 and Qβ and of the broad host range RNA phage PRR1, PP7 coat protein (127 residues) is highly hydrophobic, and contains a cluster of basic residues between positions 40 to 60. Minimal mutation distance values were calculated for comparison of PP7 coat protein with each MS2, Qβ and PRR1 coat proteins. Application of the Moore-Goodman criterion to those values, shows that these four RNA bacteriophage coat proteins very likely descent from a common ancestor.     

Dual genetically encoded phage-displayed ligands

M13 bacteriophage display presents polypeptides as fusions to phage coat proteins. Such phage-displayed ligands offer useful reagents for biosensors. Here, we report a modified phage propagation protocol for the consistent and robust display of two different genetically encoded ligands on the major coat protein, P8. The results demonstrate that the phage surface reaches a saturation point for maximum peptide display.     

Display of Ras on filamentous phage through cysteine replacement

Phage display technology has been used in a variety of contexts to understand and manipulate biomolecular interactions between proteins and other biomolecules. In this paper we describe the establishment of a phage display system for elucidation of the interactions between the GTPase Ras and its panel of effectors. It is shown how technical problems associated with phage display of a protein with unpaired cysteines, likely to be caused by the oxidizing environment of the bacterial periplasm into which the protein is directed, can be overcome by cysteine replacement based on functional and structural studies. First, the catalytic domain (residues 1-166) of mammalian H-Ras (Ras) was observed to be displayed on phage in an incorrect conformation not detectable by antibodies recognizing conformational epitopes on Ras. Although truncation of the phage coat protein used as fusion partner (g3p) resulted in minor improvements in the display, Ras was tailored for phage display by cysteine replacement. By replacing the three cysteines at positions 51, 80 and 118 of Ras with the corresponding residues in Saccharomyces cerevisiae RAS1, the resulting fusion-phage is recognized by the conformation-dependent anti-Ras antibodies. Furthermore, display of cysteine-free Ras is demonstrated by GTP-analogue dependent binding to the Ras-binding domain of the Ras-effector Raf1. These data pave the way for analysis of Ras-effector interactions using phage display technology yet demonstrate that phage display of proteins with normally reduced cysteines should be approached with caution.     

Efficient identification of phosphatidylserine-binding proteins by ORF phage display

To efficiently elucidate the biological roles of phosphatidylserine (PS), we developed open-reading-frame (ORF) phage display to identify PS-binding proteins. The procedure of phage panning was optimized with a phage clone expressing MFG-E8, a well-known PS-binding protein. Three rounds of phage panning with ORF phage display cDNA library resulted in ∼300-fold enrichment in PS-binding activity. A total of 17 PS-binding phage clones were identified. Unlike phage display with conventional cDNA libraries, all 17 PS-binding clones were ORFs encoding 13 real proteins. Sequence analysis revealed that all identified PS-specific phage clones had dimeric basic amino acid residues. GST fusion proteins were expressed for 3 PS-binding proteins and verified for their binding activity to PS liposomes, but not phosphatidylcholine liposomes. These results elucidated previously unknown PS-binding proteins and demonstrated that ORF phage display is a versatile technology capable of efficiently identifying binding proteins for non-protein molecules like PS.     

The primary structure of the coat protein of the broad-host-range RNA bacteriophage PRR1.

The complete amino acid sequence of the coat protein of RNA bacteriophage PRR1 is presented. After thermolysin digestion, 26 peptides were isolated, covering the complete coat protein chain. Their alignment was established in part using automated Edman degradation on the intact protein, in part with overlapping peptides obtained by enzymic hydrolysis with trypsin, pepsin, subtilisin and Staphylococcus aureus protease, and by chemical cleavage with cyanogen bromide and N-bromosuccinimide. To obtain the final overlaps, a highly hydrophobic, insoluble tryptic peptide was sequenced for seven steps by the currently used manual dansyl-Edman degradation procedure, which was slightly modified for application on insoluble peptides. PRR1 coat protein contains 131 amino acids, corresponding to a molecular weight of 14534. It is highly hydrophobic, and the residues with ionizable side chains are distributed unevenly: acidic residues are absent in the middle third of the sequence, whereas a clustering of basic residues occurs between positions 44 and 62. PRR1 coat protein was compared with the coat proteins of RNA coliphages MS2 and Q beta, and the minimum mutation distance was calculated for both comparisons. It is highly probable that PRR1. Q beta and MS2 share a common ancestor. The basic region present in the three coat proteins is recognized as an essential structural feature of RNA phage coat proteins.     

Phage display of an intracellular carboxylesterase of Bacillus subtilis: comparison of Sec and Tat pathway export capabilities

Using the phage display technology, a protein can be displayed at the surface of bacteriophages as a fusion to one of the phage coat proteins. Here we describe development of this method for fusion of an intracellular carboxylesterase of Bacillus subtilis to the phage minor coat protein g3p. The carboxylesterase gene was cloned in the g3p-based phagemid pCANTAB 5E upstream of the sequence encoding phage g3p and downstream of a signal peptide-encoding sequence. The phage-bound carboxylesterase was correctly folded and fully enzymatically active, as determined from hydrolysis of the naproxen methyl ester with Km values of 0.15 mM and 0.22 mM for the soluble and phage-displayed carboxylesterases, respectively. The signal peptide directs the encoded fusion protein to the cell membrane of Escherichia coli, where phage particles are assembled. In this study, we assessed the effects of several signal peptides, both Sec dependent and Tat dependent, on the translocation of the carboxylesterase in order to optimize the phage display of this enzyme normally restricted to the cytoplasm. Functional display of Bacillus carboxylesterase NA could be achieved when Sec-dependent signal peptides were used. Although a Tat-dependent signal peptide could direct carboxylesterase translocation across the inner membrane of E. coli, proper assembly into phage particles did not seem to occur.     

Single amino acid substitutions globally suppress the folding defects of temperature-sensitive folding mutants of phage P22 coat protein.

The amino acid sequence of a polypeptide defines both the folding pathway and the final three-dimensional structure of a protein. Eighteen amino acid substitutions have been identified in bacteriophage P22 coat protein that are defective in folding and cause their folding intermediates to be substrates for GroEL and GroES. These temperature-sensitive folding (tsf) substitutions identify amino acids that are critical for directing the folding of coat protein. Additional amino acid residues that are critical to the folding process of P22 coat protein were identified by isolating second site suppressors of the tsf coat proteins. Suppressor substitutions isolated from the phage carrying the tsf coat protein substitutions included global suppressors, which are substitutions capable of alleviating the folding defects of numerous tsf coat protein mutants. In addition, potential global and site-specific suppressors were isolated, as well as a group of same site amino acid substitutions that had a less severe phenotype than the tsf parent. The global suppressors were located at positions 163, 166, and 170 in the coat protein sequence and were 8-190 amino acid residues away from the tsf parent. Although the folding of coat proteins with tsf amino acid substitutions was improved by the global suppressor substitutions, GroEL remained necessary for folding. Therefore, we believe that the global suppressor sites identify a region that is critical to the folding of coat protein.     

Design, construction and function of a multicopy display vector using fusions to the major coat protein of bacteriophage M13.

Incorporation of numerous copies of a heterologous protein (bovine pancreatic trypsin inhibitor; BPTI) fused to the mature major coat protein (gene VIII product; VIII) of bacteriophage M13 has been demonstrated. Optimization of the promoter, signal peptide and host bacterial strain allowed for the construction of a working vector consisting of the M13 genome, into which was cloned a synthetic gene composed of a lac (or tac) promoter, and sequences encoding the bacterial alkaline phosphatase signal peptide, mature BPTI and the mature coat protein. Processing of the BPTI-VIII fusion protein and its incorporation into the bacteriophage were found to be maximal in a host bacterial strain containing a prlA/secY mutation. Functional protein is displayed on the surface of M13 phage, as judged by specific interactions with antiserum, anhydrotrypsin, and trypsin. Such display vectors can be used for epitope mapping, production of artificial vaccines and the screening of diverse libraries of proteins or peptides having affinity for a chosen ligand. The VIII display phage system has practical advantages over the III display phage system in that many more copies of the fusion protein can be displayed per phage particle and the presence of the VII fusion protein has little or no effect on the infectivity of the resulting bacteriophage.     

Engineering M13 for phage display

Phage display is achieved by fusing polypeptide libraries to phage coat proteins. The resulting phage particles display the polypeptides on their surfaces and they also contain the encoding DNA. Library members with particular functions can be isolated with simple selections and polypeptide sequences can be decoded from the encapsulated DNA. The technology's success depends on the efficiency with which polypeptides can be displayed on the phage surface, and significant progress has been made in engineering M13 bacteriophage coat proteins as improved phage display platforms. Functional display has been achieved with all five M13 coat proteins, with both N- and C-terminal fusions. Also, coat protein mutants have been designed and selected to improve the efficiency of heterologous protein display, and in the extreme case, completely artificial coat proteins have been evolved specifically as display platforms. These studies demonstrate that the M13 phage coat is extremely malleable, and this property can be used to engineer the phage particle specifically for phage display. These improvements expand the utility of phage display as a powerful tool in modern biotechnology.     

Efficient display of two enzymes on filamentous phage using an improved signal sequence

Directed protein-evolution strategies generally make use of a link between a protein and the encoding DNA. In phage-display technology, this link is provided by fusion of the protein with a coat protein that is incorporated into the phage particle containing the DNA. Optimization of this link can be achieved by adjusting the signal sequence of the fusion. In a previous study, directed evolution of signal sequences for optimal display of the Taq DNA polymerase I Stoffel fragment on phage yielded signal peptides with a 50-fold higher incorporation of fusion proteins in phage particles. In this article, we show that for one of the selected signal sequences, improved display on phage can be generalized to other proteins, such as adenylate cyclases from Escherichia coli and Bordetella pertussis, and that this is highly dependent on short sequences at the C-terminus of the signal peptide. Further, the display of two enzymes on phage has been achieved and may provide a strategy for directing coevolution of the two proteins. These findings should be useful for display of large and cytoplasmic proteins on filamentous phage.     

Cysteine residues in the transmembrane regions of M13 procoat protein suggest that oligomeric coat proteins assemble onto phage progeny

The M13 phage assembles in the inner membrane of Escherichia coli. During maturation, about 2,700 copies of the major coat protein move from the membrane onto a single-stranded phage DNA molecule that extrudes out of the cell. The major coat protein is synthesized as a precursor, termed procoat protein, and inserts into the membrane via a Sec-independent pathway. It is processed by a leader peptidase from its leader (signal) peptide before it is assembled onto the phage DNA. The transmembrane regions of the procoat protein play an important role in all these processes. Using cysteine mutants with mutations in the transmembrane regions of the procoat and coat proteins, we investigated which of the residues are involved in multimer formation, interaction with the leader peptidase, and formation of M13 progeny particles. We found that most single cysteine residues do not interfere with the membrane insertion, processing, and assembly of the phage. Treatment of the cells with copper phenanthroline showed that the cysteine residues were readily engaged in dimer and multimer formation. This suggests that the coat proteins assemble into multimers before they proceed onto the nascent phage particles. In addition, we found that when a cysteine is located in the leader peptide at the -6 position, processing of the mutant procoat protein and of other exported proteins is affected. This inhibition of the leader peptidase results in death of the cell and shows that there are distinct amino acid residues in the M13 procoat protein involved at specific steps of the phage assembly process.     

The molecular basis for genetic polymorphism of human deoxyribonuclease II (DNase II): a single nucleotide substitution in the promoter region of human DNase II changes the promoter activity

We report that, contrary to common belief, polypeptides fused to the carboxy-terminus of the M13 gene-3 minor coat protein are functionally displayed on the phage surface. In a phagemid display system, carboxy-terminal fusion through optimized linker sequences resulted in display levels comparable to those achieved with conventional amino-terminal fusions. These findings are of considerable importance to phage display technology because they enable investigations not suited to amino-terminal display, including the study of protein–protein interactions requiring free carboxy-termini, functional cDNA cloning efforts, and the display of intracellular proteins.     

Redesign of a four-helix bundle protein by phage display coupled with proteolysis and structural characterization by NMR and X-ray crystallography

To test whether it is practical to use phage display coupled with proteolysis for protein design, we used this approach to convert a partially unfolded four-helix bundle protein, apocytochrome b(562), to a stably folded four-helix bundle protein. Four residues expected to form a hydrophobic core were mutated. One residue was changed to Trp to provide a fluorescence probe for studying the protein's physical properties and to partially fill the void left by the heme. The other three positions were randomly mutated. In addition, another residue in the region to be redesigned was substituted with Arg to provide a specific cutting site for protease Arg-c. This library of mutants was displayed on the surface of phage and challenged with protease Arg-c to select stably folded proteins. The consensus sequence that emerged from the selection included hydrophobic residues at only one of the three positions and non-hydrophobic residues at the other two. Nevertheless, the selected proteins were thermodynamically very stable. The structure of a selected protein was characterized using multi-dimensional NMR. All four helices were formed in the structure. Further, site-directed mutagenesis was used to change one of the two non-hydrophobic residues to a hydrophobic residue, which increased the stability of the protein, indicating that the selection result was not based solely on the protein's global stability and that local structural characteristics may also govern the selection. This conclusion is supported by the crystal structure of another mutant that has two hydrophobic residues substituted for the two non-hydrophobic residues. These results suggest that the hydrophobic interactions in the core are not sufficient to dictate the selection and that the location of the cutting site of the protease also influences the selection of structures.     

Structural characterization of bacteriophage M13 solubilization by amphiphiles

The structural properties of bacteriophage M13 during disassembly were studied in different membrane model systems, composed of a homologue series of the detergents sodium octyl sulfate, sodium decyl sulfate, and sodium dodecyl sulfate. The structural changes during phage disruption were monitored by spin-labeled electron spin resonance (ESR) and circular dichroism spectroscopy. For the purpose of ESR spectroscopy the major coat protein mutants V31C and G38C were site-directed spin labeled in the intact phage particle. These mutants were selected because the mutated sites are located in the hydrophobic part of the protein, and provide good reporting locations for phage integrity. All amphiphiles studied were capable of phage disruption. However, no significant phage disruption was detected below the critical micelle concentration of the amphiphile used. Based on this finding and the linear dependence of phage disruption by amphiphiles on the phage concentration, it is suggested that the solubilization of the proteins of the phage coat by amphiphiles starts with an attachment to and penetration of amphiphile molecules into the phage particle. The amphiphile concentration in the phage increases in proportion to the amphiphile concentration in the aqueous phase. Incorporation of the amphiphile in the phage particle is accompanied with a change in local mobility of the spin-labeled part of the coat protein and its secondary structure. With increasing the amphiphile concentration in the phage particle, a concentration is reached where the concentration of the amphiphile in the aqueous phase is around its critical micelle concentration. A further increase in amphiphile concentration results in massive phage disruption. Phage disruption by amphiphiles appears to be dependent on the phage coat mutations. It is concluded that phage disruption is dependent on a hydrophobic effect, since phage solubilization could significantly be increased by keeping the hydrophilic part of the amphiphile constant, while increasing its hydrophobic part.