Thermophilic biodesulfurization and its application in oil desulfurization

To reduce the harm caused to the environment by fuel combustion and meet the increasingly stringent emission standards, the sulfur content of fuels should be reduced. Dibenzothiophene, benzothiophene, and their derivatives are sulfur-containing components of fuels that are difficult to desulfurize and can therefore cause great environmental damage. Biodesulfurization is a desulfurization method that has the advantage of being able to remove dibenzothiophene and its derivatives removed easily under conditions that are relatively mild when compared with hydrodesulfurization. This paper introduces the advantages of thermophilic biodesulfurization compared with mesophilic biodesulfurization; analyzes the desulfurization mechanism, including the desulfurization pathways and enzymic systems of desulfurization bacteria; and discusses the application of biodesulfurization in oil desulfurization. The main problems existing in biodesulfurization and possible solutions are also analyzed in this paper. Biological desulfurization is a promising method for desulfurization; accordingly, more studies investigating biodesulfurization of actual oil are needed to enable the industrialized application of biodesulfurization.

     

Comparative analysis of phenotypic and genotypic characteristics of two desulfurizing bacterial strains, Mycobacterium phlei SM120-1 and Mycobacterium phlei GTIS10

AIM: To compare few phenotypic and genotypic characteristics of two desulfurizing bacterial strains, Mycobacterium phlei SM120-1 and Mycobacterium phlei GTIS10. METHODS AND RESULTS: In the present study, dibenzothiophene (DBT) desulfurizing activity, composition of fatty acids of cell membranes, DBT sulfone monoxygenase gene (bdsA) and the selection pressure applied during the growth and enrichment of the bacterial strains M. phlei SM120-1 and M. phlei GTIS10 were compared in our laboratory. The DBT desulfurization activity of M. phlei SM120-1 was found to be 0.17 +/- 0.02 micromol 2-HBP min(-1) (gram dry cell weight)(-1) and that of the bacterial strain M. phlei GTIS10 was 1.09 +/- 0.05 micromol 2-HBP min(-1) (gram dry cell weight)(-1). Fatty acid methyl ester analysis of cell membranes of these two bacterial strains in the presence of light gas oil showed that both the strains had different fatty acid profiles in their cell membranes. Comparison of the full gene sequences of the desulfurization gene bdsA in the two bacterial strains showed significant difference in the bdsA gene sequences. There was a significant difference observed in the selection pressure applied during the growth and enrichment of the two bacterial strains. CONCLUSIONS: The results of the comparative study of the bacterial strains, M. phlei SM120-1 and M. phlei GTIS10 showed that there were considerable differences in the phenotypic and genotypic characteristics of these two strains. SIGNIFICANCE AND IMPACT OF STUDY: The present study would broaden the understanding of biodesulfurization trait at intra-species level.     

Thermophilic Biodesulfurization of Various Heterocyclic Sulfur Compounds and Crude Straight-Run Light Gas Oil Fraction by a Newly Isolated Strain Mycobacterium phlei WU-0103

Various heterocyclic sulfur compounds such as naphtho[2,1-b]thiophene (NTH) and benzo[b]thiophene (BTH) derivatives can be detected in diesel oil, in addition to dibenzothiophene (DBT) derivatives. Mycobacterium phlei WU-0103 was newly isolated as a bacterial strain capable of growing in a medium with NTH as the sulfur source at 50°C. M. phlei WU-0103 could degrade various heterocyclic sulfur compounds, not only NTH and its derivatives but also DBT, BTH, and their derivatives at 45°C. When M. phlei WU-0103 was cultivated with the heterocyclic sulfur compounds such as NTH, NTH 3,3-dioxide, DBT, BTH, and 4,6-dialkylDBTs as sulfur sources, monohydroxy compounds and sulfone compounds corresponding to starting heterocyclic sulfur compounds were detected by gas chromatography–mass spectrometry analysis, suggesting the sulfur-specific desulfurization pathways for heterocyclic sulfur compounds. Moreover, total sulfur content in 12-fold-diluted crude straight-run light gas oil fraction was reduced from 1000 to 475 ppm S, with 52% reduction, by the biodesulfurization treatment at 45°C with growing cells of M. phlei WU-0103. Gas chromatography analysis with a flame photometric detector revealed that most of the resolvable peaks, such as those corresponding to alkylated derivatives of NTH, DBT, and BTH, disappeared after the biodesulfurization treatment. These results indicated that M. phlei WU-0103 may have a good potential as a biocatalyst for practical biodesulfurization of diesel oil.     

Analysis of biodesulfurization of model oil system by the bacterium,strain RIPI-22

The execution of 4S process (sulfur-specific pathway) by growing cells of the newly isolated strain RIPI-22 and its resting cells in both aqueous reaction system and in two-phase system were investigated. The time for maximum desulfurization activity of the strain in resting state and in model oil system (hexadecane containing dibenzothiophene) was 7 h. Using taguchi design procedure the effects of cell density, pH and phase ratio on the desulfurization reaction were studied. The extent of desulfurization was hardly dependent on the pH where as the volume ratio of hydrocarbon-aqueous phase significantly affected the desulfurization activity.On the basis of the determined optimum desulfurizing conditions, the biodesulfurization pattern of DBT was studied and kinetic parameters were calculated.     

A novel enzyme, 2'-hydroxybiphenyl-2-sulfinate desulfinase (DszB), from a dibenzothiophene-desulfurizing bacterium Rhodococcus erythropolis KA2-5-1: gene overexpression and enzyme characterization

Dibenzothiophene (DBT), a model of organic sulfur compound in petroleum, is microbially desulfurized to 2-hydroxybiphenyl (2-HBP), and the gene operon dszABC was required for DBT desulfurization. The final step in the microbial DBT desulfurization is the conversion of 2'-hydroxybiphenyl-2-sulfinate (HBPSi) to 2-HBP catalyzed by DszB. In this study, DszB of a DBT-desulfurizing bacterium Rhodococcus erythropolis KA2-5-1 was overproduced in Escherichia coli by coexpression with chaperonin genes, groEL/groES, at 25 degrees C. The recombinant DszB was purified to homogeneity and characterized. The optimal temperature and pH for DszB activity were 35 degrees C and about 7.5, respectively. The K(m) and k(cat) values for HBPSi were 8.2 microM and 0.123.s(-1), respectively. DszB has only one cysteine residue, and the mutant enzyme completely lost the activity when the cysteine residue was changed to a serine residue. This result together with experiments using inhibitors showed that the cysteine residue contributes to the enzyme activity. DszB was also inhibited by a reaction product, 2-HBP (K(i)=0.25 mM), and its derivatives, but not by the other reaction product, sulfite. The enzyme showed a narrow substrate specificity: only 2-phenylbenzene sulfinate except HBPSi served as a substrate among the aromatic and aliphatic sulfinates or sulfonates tested. DszB was thought to be a novel enzyme (HBPSi desulfinase) in that it could specifically cleave the carbon-sulfur bond of HBPSi to give 2-HBP and sulfite ion without the aid of any other proteinic components and coenzymes.