Stable fluorescent complexes of double-stranded DNA with bis-intercalating asymmetric cyanine dyes: properties and applications.

The synthesis, proof of structure, and the absorption and fluorescence properties of two new unsymmetrical cyanine dyes, thiazole orange dimer (TOTO; 1,1'-(4,4,7,7-tetramethyl-4,7- diazaundecamethylene)-bis-4-[3-methyl-2,3-dihydro-(benzo-1,3-thiaz ole)-2- methylidene]-quinolinium tetraiodide) and oxazole yellow dimer (YOYO; an analogue of TOTO with a benzo-1,3-oxazole in place of the benzo-1,3-thiazole) are reported. TOTO and YOYO are virtually non-fluorescent in solution, but form highly fluorescent complexes with double-stranded DNA (dsDNA), up to a maximum dye to DNA bp ratio of 1:4, with greater than 1000-fold fluorescence enhancement. The dsDNA-TOTO (lambda max 513 nm; lambda maxF 532 nm) and dsDNA-YOYO (lambda max 489 nm; lambda maxF 509 nm) complexes are completely stable to electrophoresis on agarose and acrylamide gels. Mixtures of restriction fragments pre-labeled with ethidium dimer (EthD; lambda maxF 616 nm) and those pre-labeled with either TOTO or YOYO were separated by electrophoresis. Laser excitation at 488 nm and simultaneous confocal fluorescence detection at 620-750 nm (dsDNA-EthD emission) and 500-565 nm (dsDNA-TOTO or dsDNA-YOYO emission) allowed sensitive detection, quantitation, and accurate sizing of restriction fragments ranging from 600 to 24,000 bp. The limit of detection of dsDNA-TOTO and YOYO complexes with a laser-excited confocal fluorescence gel scanner for a band 5-mm wide on a 1-mm thick agarose gel was 4 picograms, about 500-fold lower than attainable by conventional staining with ethidium bromide.     

Electrophoresis of DNA in oriented agarose gels

Oriented agarose gels were prepared by applying an electric field to molten agarose while it was solidifying. Immediately afterwards, DNA samples were applied to the gel and electrophoresed in a constant unidirectional electric field. Regardless of whether the orienting field was applied parallel or perpendicular to the eventual direction of electrophoresis, the mobilities of linear and supercoiled DNA molecules were either faster (80% of the time) or slower (20% of the time) than observed in control, unoriented gels run simultaneously. The difference in mobility in the oriented gel (whether faster or slower) usually increased with increasing DNA molecular weight and increasing voltage applied to orient the agarose matrix. In perpendicularly oriented gels linear DNA fragments traveled in lanes skewed toward the side of the gel; supercoiled DNA molecules traveled in straight lanes. If the orienting voltage was applied parallel to the direction of electrophoresis, both linear and supercoiled DNA molecules migrated in straight lanes. These effects were observed in gels cast from different types of agarose, using various agarose concentrations and two different running buffers, and were observed both with and without ethidium bromide incorporated in the gel. Similar results were observed if the agarose was allowed to solidify first, and the orienting electric field was then applied to the gel for several hours before the DNA samples were added and electrophoresed. The results suggest that the agarose matrix can be oriented by electric fields applied to the gel before and probably during electrophoresis, and that orientation of the matrix affects the mobility and direction of migration of DNA molecules. The skewed lanes observed in the perpendicularly oriented gels suggest that pores or channels can be created in the matrix by application of an electric field. The oriented matrix becomes randomized with time, because DNA fragments in oriented and unoriented gels migrated in straight lanes with identical velocities 24 hours later.     

Practical applications in molecular biology of sensitive fluorescence detection by a laser-excited fluorescence image analyzer.

A new kind of fluorescence image analyzer was developed for a variety of uses, especially in molecular biology. Compounds labeled with fluorescent groups on a gel or nitrocellulose membrane are excited with 532 nm of light from a green laser. The fluorescence emitted passes through light-collecting fibers to a photomultiplier. Imaging data converted from the emitted light are analyzed by a microcomputer and stored on a magnetic optical disk. Dideoxy DNA sequencing was done with the same amount of DNA used for autoradiography, and the sequencing ladders obtained from gel scanning were automatically converted to sequence data by the analyzer. When an agarose gel was analyzed after electrophoresis, DNA stained with ethidium bromide was detected by the analyzer with higher sensitivity rather than by the conventional photographic method. Nylon and nitrocellulose membranes could be read by the analyzer, so blot hybridization experiments can be done without radioisotopes. High-quality computer storage of the imaging data from gel electrophoresis and hybridized membranes, including pulsed-field gels, make it possible to quantify image intensity and to construct many kinds of databases.     

DNA staining in agarose and polyacrylamide gels by methyl green

ABSTRACT

Methyl green (MG) is an inexpensive, nonproprietary, traditional histological stain for cell nuclei. When bound to DNA and upon excitation with orange-red light, it fluoresces brightly in the far red region. We compared MG with ethidium bromide (EtBr), the conventional stain for DNA in gels, and Serva DNA stain G? (SDsG), a proprietary stain marketed as a safer alternative to EtBr for staining of electrophoresed DNA bands in agarose and polyacrylamide gels. DNA-MG fluorescence was recorded and 2.4 μg/ml MG produced crisp images of electrophoresed DNA after incubation for 10 min. Stain solutions were stable and detection limits for faint bands as well as relative densitometric quantitation were equivalent to EtBr. MG, EtBr and SDsG cost 0.0192, 0.024 and 157.5 US cents/test, respectively. MG is an effective stain for visualizing DNA in agarose and polyacrylamide gels. Its major advantages including low cost, comparable quality of staining, storage at room temperature, photo-resistance and low mutagenic profile outweigh its disadvantages such as staining of tracking dye and requirement for a gel documentation system with a red filter.     

High-sensitivity two-color detection of double-stranded DNA with a confocal fluorescence gel scanner using ethidium homodimer and thiazole orange.

Ethidium homodimer (EthD; lambda Fmax 620 nm) at EthD:DNA ratios up to 1 dye:4-5 bp forms stable fluorescent complexes with double-stranded DNA (dsDNA) which can be detected with high sensitivity using a confocal fluorescence gel scanner (Glazer, A.N., Peck, K. & Mathies, R.A. (1990) Proc. Natl. Acad. Sci. U.S.A. 87, 3851-3855). However, on incubation with unlabeled DNA partial migration of EthD takes place from its complex with dsDNA to the unlabeled DNA. It is shown here that this migration is dependent on the fractional occupancy of intercalating sites in the original dsDNA-EthD complex and that there is no detectable transfer from dsDNA-EthD complexes formed at 50 bp: 1 dye. The monointercalator thiazole orange (TO; lambda Fmax 530 nm) forms readily dissociable complexes with dsDNA with a large fluorescence enhancement on binding (Lee, L.G., Chen, C. & Liu, L.A. (1986) Cytometry 7, 508-517). However, a large molar excess of TO does not displace EthD from its complex with dsDNA. When TO and EthD are bound to the same dsDNA molecule, excitation of TO leads to efficient energy transfer from TO to EthD. This observation shows the practicability of 'sensitizing' EthD fluorescence with a second intercalating dye having a very high absorption coefficient and efficient energy transfer characteristics. Electrophoresis on agarose gels, with TO in the buffer, of preformed linearized M13mp18 DNA-EthD complex together with unlabeled linearized pBR322 permits sensitive fluorescence detection in the same lane of pBR322 DNA-TO complex at 530 nm and of M13mp18 DNA-EthD complex at 620 nm. These observations lay the groundwork for the use of stable DNA-dye intercalation complexes carrying hundreds of chromophores in two-color applications such as the physical mapping of chromosomes.     

Evaluation of densitometry data using interactive computer graphics: Application to DNA agarose gels

A method of analyzing DNA agarose gels using interactive computer graphics is described. After electrophoresis in an alkaline agarose gel, DNA is neutralized, stained with ethidium bromide and excited with ultraviolet radiation. The resulting fluorescent distribution on the gel is photographed, and the negative scanned by a digitizing densitometer. The data is subsequently analyzed using a computer program developed to facilitate manipulation and selection of data from the densitometer trace. The method has been applied to determine pyrimidine dimer yields in DNA from human lymphocytes exposed to UV radiation. The technique significantly reduces the time required to analyze such data, while also providing greater accuracy. The method could be easily adapted to assist in similar analyses of other macromolecules such as RNA or proteins.     

Determination of plasmid copy number by fluorescence densitometry

A simple and reliable method for the determination of plasmid copy numbers by direct fluorescence densitometry of ethidium bromide-stained electrophoretic gels was developed. In developing the method, the following parameters were evaluated and controlled: plasmid DNA trapping in the linear chromosomal DNA, staining-destaining kinetics for ethidium bromide, linearity of the fluorescence response, and the effect of the molecular topology of DNA on ethidium bromide binding to DNA in agarose.     

Comparison of ethidium bromide and 4′,6-diamidino-2-phenylindole as quantitative fluorescent stains for DNA in agarose gels

Two methods of quantitative, fluorescent detection of DNA bands in agarose gels separated by electrophoresis were evaluated for sensitivity and linearity of response. Comparisons of ethidium bromide staining with a method using 4′,6-diamidino-2-phenylindole (DAPI) developed in this work showed that DAPI is several times more sensitive than ethidium bromide in conditions of comparable background flourescence. Optimum flourescent staining and detection conditions for DNA bands in agarose gels using DAPI are desctribed, and advantages of this method over other fluorescent detection methods are discussed.     

从琼脂糖凝胶中高效回收DNA技术的探讨

用两只离心管制成的凝胶过滤装置,从电泳后的琼脂糖凝胶中回收DNA片段的简易方法。它依次包括以下步骤：凝胶过滤装置的制作、凝胶切割、凝胶低温冷冻、低温高速离心、ddH20洗胶、DNA纯化和回收效果检测等。用此方法回收的DNA片段产率高、质量纯,可直接用于分子生物学实验的后续操作,如载体连接、PCR模板获得、DNA探针制备、基因测序等。其优点是：DNA片段的回收率高（90％以上）,质量好;操作简便,耗时短;回收装置简单,成本低廉,可进行商品化开发。     

Automatic reading of DNA sequencing gel autoradiographs using a large format digital scanner.

We have developed a large format digital scanner for several applications in nucleic acid analysis. Here we describe the scanning of autoradiographs of DNA sequencing gels and a set of programs for reading the base sequence. The programs correct distortions in the gel, recognize bands by their characteristic shape and assign bases to bands by weighting band position and intensity. The sequence read in this way is as accurate as that read by an expert.     

Simultaneous electroelution and concentration of DNA fragments from agarose gels

A rapid and inexpensive method for the electroelution of DNA fragments from agarose gels is described. DNA fragments were separated by agarose gel electrophoresis and visualized by staining with ethidium bromide. Selected DNA fragments were placed into electroeluter tubes capped with dialysis membrane and electroeluted into a small volume of buffer using a conventional horizontal gel electrophoresis apparatus. The method successfully eluted and concentrated DNA fragments with molecular weights ranging from 2.7 to 13.9 MDa in 3 h.     

An apparatus for the fluorescence scanning of ethidium bromide-stained gels

An apparatus has been constructed which permits a conventional gel-scanning apparatus to be used for the fluorescence scanning of nucleic acid bands in either agarose or polyacrylamide gels stained with ethidium bromide. The method involves the use of an ultraviolet (uv) light source perpendicular to the plane of the photodetector and a filter system to remove uv light. It is demonstrated that the method yields quantitative results and has a fourfold greater sensitivity than absorbance scanning for agarose gels.     

Analysis of recombinant adenoviruses using an integrated microfluidic chip-based system

The use of recombinant virus for gene therapy requires rigorous quality control methods to ensure that the viral vector preparations are functional and safe. A viral identity test is performed in which the viral payload, or transgene, is PCR amplified, followed by digestion with restriction enzymes that yields a characteristic "fingerprint." These DNA fragments are typically analyzed by agarose gel electrophoresis. The ethidium bromide-stained gels are photographed or scanned and the results are sufficient for a qualitative or semiquantitative identity confirmation of the viral product. We have investigated the use of an integrated microfluidic chip-based system as a new tool in the quality control testing of a recombinant, adenoviral, gene therapy product. The chip-based method was found to be very sensitive, requiring 100-fold less sample and only one-third the time compared to the agarose gel method. The automated data analysis sizes and quantitates the DNA fragments, thus yielding a more thorough, reproducible, sensitive, and rapid analysis.     

An ethidium bromide-agarose plate assay for the nonradioactive detection of cDNA synthesis

Ethidium bromide was used to determine the success of cDNA synthesis reactions. Since ethidium bromide in agarose can be used to quantitate RNA and DNA, conditions under which the greater fluorescence of double-stranded DNA (dsDNA) is utilized were devised to assay dsDNA synthesis from mRNA. Ethidium bromide at 5 micrograms/ml in agarose allowed quantitative detection of cDNA in the range of 0.03 to 0.0015 microgram. Sodium dodecyl sulfate had an adverse effect on the measurement of cDNA. Subsequent cDNA analysis by alkaline gel electrophoresis and staining in 5 micrograms/ml ethidium bromide allowed accurate and rapid sizing of cDNA and required only 0.1-0.05 microgram cDNA.     

Quantification of circular DNA breakage by fluorescence scanning of ethidium bromide-stained horizontal gels: application to the effect of intercalating agents

Direct scanning of the fluorescence of DNA in ethidium bromide-stained agarose gels allowed the quantification of closed and open circular DNA forms. Fluorescence of form I was higher than expected compared to form II. Application of this technique is shown for an intercalating drug treatment of DNA.     

DNA staining in agarose gels with Zn²+-cyclen-pyrene

A pyrene-labeled Zn2+-cyclen complex for the staining of DNA in agarose gels is reported. The metal chelate coordinates reversibly to the DNA phosphate backbone, which induces the formation of pyrene excimers. The typical pyrene excimer emission is used for the detection of the DNA. Staining is limited to agarose gels and is less sensitive than ethidium bromide, but DNA amounts as low as 10 ng and short DNA strands (～300 b.p.) are detectable. Gel extraction as a standard technique in molecular biology was successfully performed after staining with Zn2+-cyclen-pyrene. Cytotoxicity tests on HeLa and V-79 cells reveal that the zinc-cyclen pyrene probe is significant less toxic compared to ethidium bromide.     

Quantitative assay of deoxyribonuclease activity after isoelectric focusing in polyacrylamide gels: pH control and effects of enzyme diffusion

A method for the quantitative assay of nuclease activity in crude cell lysates after isoelectric focusing (IEF) in polyacrylamide slab gels is described. After IEF, an agarose overlay gel containing DNA is placed on the IEF gel and the nuclease activity quantified by the loss of ethidium bromide fluorescence of the DNA. With this method a linear response was obtained for 1 to 10 ng of DNase I. Various methods of pH equilibration after IEF were also evaluated. The use of a high buffer concentration in the overlay gel is recommended to control the pH during the enzyme reaction. An analytical solution for the diffusion of enzymes from the IEF gel to the overlay gel is also presented and an equation that may be used to choose optimum times for transfer of the enzyme from the IEF gel to the overlay gel is given.     

DNA Staining in Agarose Gels with ZN2+-Cyclen-Pyrene

A pyrene-labeled Zn²⁺-cyclen complex for the staining of DNA in agarose gels is reported. The metal chelate coordinates reversibly to the DNA phosphate backbone, which induces the formation of pyrene excimers. The typical pyrene excimer emission is used for the detection of the DNA. Staining is limited to agarose gels and is less sensitive than ethidium bromide, but DNA amounts as low as 10 ng and short DNA strands (～300 b.p.) are detectable. Gel extraction as a standard technique in molecular biology was successfully performed after staining with Zn²⁺-cyclen-pyrene. Cytotoxicity tests on HeLa and V-79 cells reveal that the zinc-cyclen pyrene probe is significant less toxic compared to ethidium bromide.     

Orientation of DNA in agarose gels.

An orientation of the lambda DNA during the electrophoresis in agarose gels was measured by a microscopic linear dichroism technique. The method involved staining the DNA with the dye ethidium bromide and measuring under the microscope the polarization properties of the fluorescence field around the electrophoretic band containing the nucleic acid. It was first established that the fluorescence properties of the ethidium bromide-DNA complex were the same in agarose gel and in a solution. Then the linear dichroism method was used to measure the dichroism of the absorption dipole of EB dye bound to lambda DNA. In a typical experiment the orientation of two-tenth of a picogram (2 x 10(-13)g) of DNA was measured. When the electric field was turned on, the dichroism developed rapidly and assumed a steady state value which increased with the strength of the field and with the size of DNA. A linear dichroism equation related the measured dichroism of fluorescence to the mean orientation of the absorption dipole of ethidium bromide and to an extent to which the orientation of this dipole deviated from the mean. The observed development of dichroism in the presence of an electric field was interpreted as an alignment of DNA along the direction of the field. The increase in the steady state value of dichroism with the rise in the strength of the field and with the increase of the size of DNA was interpreted as a better alignment of DNA along the direction of the field and as a smaller deviation from its mean orientation.     

Rapid method for detecting SNPs on agarose gels and its application in candidate gene mapping

TILLING (Targeting Induced Local Lesions IN Genomes) exploits the fact that CEL I endonuclease cleaves heteroduplexes at positions of single nucleotide or small indel mismatches. To detect single nucleotide polymorphisms (SNPs) across a population, DNA pools are created and a target locus under query is PCR-amplified and subjected to heteroduplex formation, followed by CEL I cleavage. Currently, the common method used to detect cleaved products is by polyacrylamide gel electrophoresis using a high-throughput genotyping platform. Exact SNPs are then determined by sequencing. We sought to simplify the detection of CEL I-cleaved products on conventional agarose gels to make the technique more accessible to collaborating partners in developing countries where access to instrumentation could be limiting. Here, we used a panel of stress-related genes to evaluate SNP detection across 48 rice genotypes by contrasting them individually against IR64 and Nipponbare. SNP detection calls corresponded perfectly with those obtained from the Li-Cor genotypers. We were able to detect SNPs in pools of eight DNA templates, suggesting that the agarose gel system could be used to screen for SNPs with comparable throughput as that of the Li-Cor genotypers and showed that the throughput can be increased by analyzing larger amplicons (∼3 kb). The agarose method offers a significant advantage by alleviating the need for labeled primers. We further demonstrated that the agarose method can be effectively used in gene mapping, an application particularly useful for parental lines with low levels of polymorphism. The lower cost and simplicity of the technique make it possible for broader applications of SNP-based markers for germplasm characterization and mapping studies.