Ligation-independent cloning of glutathione S-transferase fusion genes for expression in Escherichia coli.

A plasmid vector has been constructed that allows the ligation-independent cloning of cDNAs in any reading frame and directs their synthesis in Escherichia coli as glutathione S-transferase-linked fusion proteins. The cloning procedure does not require restriction enzyme digestion of the target sequence and does not introduce any additional sequences between the thrombin cleavage site and the foreign protein. Extended single-stranded tails complementary between the vector and insert, generated by the (3'----5') exonuclease activity of T4 DNA polymerase, obviate the need for in vitro ligation prior to bacterial transformation. This cloning procedure is rapid and highly efficient, and has been used successfully to construct a series of fusion proteins to investigate the sequence requirements for efficient thrombin cleavage.     

A rapid method for recombination and site-specific mutagenesis by placing homologous ends on DNA using polymerase chain reaction

We have developed a novel polymerase chain reaction (PCR) method that permits the rapid generation of site-specific mutants and recombinant DNA constructs with a minimum number of steps and primers. DNA segments are modified by using amplifying primers that add homologous ends to the polymerase chain reaction product(s). These homologous ends undergo recombination in vivo following transformation of recA-E. coli strains used routinely in cloning. In vivo circularization of PCR products containing plasmid sequences with a selective marker permits the rapid cloning of the desired mutant or recombinant. In the mutagenesis protocol, 7 of the 12 clones contained the product of interest, and 6 of these clones had no detected error (50% of the clones without detected errors). In each of several recombination protocols, at least 50% of the clones tested contained the insert of interest without detected errors.     

Rapid verification of lambda-cDNA clones using mixed-base oligonucleotide as screening probe and sequencing primer

A rapid procedure has been developed for the isolation and verification of cDNA clones isolated from a cDNA library based on lambda vectors. Using information of the partial amino acid sequence of a protein, synthetic mixed-base oligonucleotides are first employed as a screening probe using the plaque hybridization procedure. The cDNA inserts of the clones obtained are then directly amplified by polymerase chain reaction (PCR) using primers flanking the cloning site of the vector. Besides being used for cloning into a plasmid vector, the amplified DNA's are also subjected to nucleotide sequence analysis using the same mixed-base oligonucleotides as sequencing primers. This approach allows sequencing through the region of the known amino acid sequence for direct verification of the authenticity of the clones obtained. This procedure has successfully been used for cloning and partial characterization of the gene coding for a platelet aggregation inhibitor.     

Rapid generation of subclones for DNA sequencing using the reverse cloning procedure

A fast and reliable procedure for generating subclones necessary for sequencing long stretches of DNA has been developed. The reverse cloning procedure involves cloning a fragment of DNA into a single-stranded plasmid or phage vector containing a polycloning region; synthesizing variable lengths of double-stranded DNA using a "Universal Primer"; isolating the double-stranded DNA; and force cloning the double-stranded DNA fragments into a complementary vector with the polycloning region in the reverse orientation. The resulting clones can be sequenced, using the same Universal Primer and T7 DNA polymerase, to provide overlapping DNA sequences. The reverse cloning procedure can be used to construct deletion mutations.     

Rapid Restriction Enzyme-Free Cloning of PCR Products: A High-Throughput Method Applicable for Library Construction

Herein, we describe a novel cloning strategy for PCR-amplified DNA which employs the type IIs restriction endonuclease BsaI to create a linearized vector with four base-long 5′-overhangs, and T4 DNA polymerase treatment of the insert in presence of a single dNTP to create vector-compatible four base-long overhangs. Notably, the insert preparation does not require any restriction enzyme treatment. The BsaI sites in the vector are oriented in such a manner that upon digestion with BsaI, a stuffer sequence along with both BsaI recognition sequences is removed. The sequence of the four base-long overhangs produced by BsaI cleavage were designed to be non-palindromic, non-compatible to each other. Therefore, only ligation of an insert carrying compatible ends allows directional cloning of the insert to the vector to generate a recombinant without recreating the BsaI sites. We also developed rapid protocols for insert preparation and cloning, by which the entire process from PCR to transformation can be completed in 6–8 h and DNA fragments ranging in size from 200 to 2200 bp can be cloned with equal efficiencies. One protocol uses a single tube for insert preparation if amplification is performed using polymerases with low 3′-exonuclease activity. The other protocol is compatible with any thermostable polymerase, including those with high 3′-exonuclease activity, and does not significantly increase the time required for cloning. The suitability of this method for high-throughput cloning was demonstrated by cloning batches of 24 PCR products with nearly 100% efficiency. The cloning strategy is also suitable for high efficiency cloning and was used to construct large libraries comprising more than 10⁸ clones/µg vector. Additionally, based on this strategy, a variety of vectors were constructed for the expression of proteins in E. coli, enabling large number of different clones to be rapidly generated.     

Universal TA cloning

TA cloning is one of the simplest and most efficient methods for the cloning of PCR products. The procedure exploits the terminal transferase activity of certain thermophilic DNA polymerases, including Thermus aquaticus (Taq) polymerase. Taq polymerase has non-template dependent activity which preferentially adds a single adenosine to the 3'-ends of a double stranded DNA molecule, and thus most of the molecules PCR amplified by Taq polymerase possess single 3'-A overhangs. The use of a linearized "T-vector" which has single 3'-T overhangs on both ends allows direct, high-efficiency cloning of PCR products, facilitated by complementarity between the PCR product 3'-A overhangs and vector 3'-T overhangs. The TA cloning method can be easily modified so that the same T-vector can be used to clone any double-stranded DNA fragment, including PCR products amplified by any DNA polymerase, as well as all blunt- and sticky-ended DNA species. This technique is especially useful when compatible restriction sites are not available for the subcloning of DNA fragments from one vector to another. Directional cloning is made possible by appropriate hemi-phosphorylation of both the T-vectors and the inserts. With a single T-vector at hand, any DNA fragment can be cloned without compromising the cloning efficiency. The universal TA cloning method is thus both convenient and labor-saving.     

A noncommercial polymerase chain reaction-based method to approach one hundred percent recombinant clone selection efficiency

Molecular cloning is an important procedure in molecular biology, but this is often a rate-limiting step and can be very time-consuming, possibly due to low ligation efficiency. Here, we describe a simple polymerase chain reaction (PCR)-based strategy to approach 100% selection efficiency. The post-ligation mixture containing the recombinant was subjected to insert-specific primer-mediated PCR amplification using a high-fidelity DNA Pfu polymerase generating a plasmid containing staggered nicks. The PCR mixture was then digested with endonuclease DpnI, which digests the methylated and hemimethylated parental DNA template. The nicked vector was transformed into XL1 blue supercompetent cells where the nicks were repaired, thus amplifying and selecting only the newly amplified recombinant clones.     

A PCR-based method for isolation of genomic DNA flanking a known DNA sequence

We describe a simple PCR-based method for the isolation of genomic DNA that lies adjacent to a known DNA sequence. The method is based on the directional cloning of digested genomic DNA into the multiple cloning site of a pUC-based plasmid to generate a limited genomic library. The library is plated onto a number of selective LA plates which are incubated overnight, and recombinant plasmid DNA is then isolated from resistant colonies pooled from each plate. PCR amplification is performed on the pooled recombinant plasmid DNAs using primers specific for the pUC vector and the known genomic sequence. The combination of efficient directional cloning and bacterial transformation gives relative enrichment for the genomic sequence of interest and generates a simple DNA template, enabling easy amplification by PCR.     

Changes of 5＇ Terminal Nucleotides of PCR Primers Causing Variable T-A Cloning Efficiency

T-A cloning takes advantage of the unpaired adenosyl residue added to the 3＇ terminus of amplified DNAs by Taq and other thermostable DNA polymerase and uses a Ilnearlzed plasmld vector with a protruding 3＇ thymldylate residue at each of Its 3＇ termini to clone polymerase chain reaction （PCR）-derived DNA fragments. It Is a simple, reliable, and efficient Ilgatlon-dependent cloning method for PCR products, but the drawback of variable cloning efficiency occurs during application. In the present work, the relationship between variable T-A cloning efficiency and the different 5＇ end nucleotlde base of primers used In PCR amplification was studied. The results showed that different cloning efficiency was obtained with different primer pairs containing A, T, C and G at the 5＇ terminus respectively. The data shows that when the 5＇ end base of primer pair was adenosyl, more white colonies could be obtained In cloning the corresponding PCR product In comparison with other bases. And the least white colonies were formed when using the primer pair with 5＇ cytldylate end. The gluanylate end primers resulted In almost the same cloning efficiency In the white colonies amount as the thymldylate end primer did, and this efficiency was much lower than that of adenosyl end primers. This presumably is a consequence of variability In 3＇dA addition to PCR products mediated by Taq polymerase. Our results offer instructions for primer design for researchers who choose T-A cloning to clone PCR products.     

Ligase-free subcloning: a versatile method to subclone polymerase chain reaction (PCR) products in a single day.

Often, it is convenient to subclone polymerase chain reaction (PCR) products into a plasmid vector for subsequent replication in bacteria, but conventional subcloning methods often fail. We report a rapid and versatile method to subclone PCR products directionally into a specific site of virtually any plasmid vector. The procedure requires only four primers, does not require DNA ligase, and may be accomplished in a single day. Ligase-free subcloning is performed by incorporating into the PCR primers sequences at the 5' ends that result in PCR products whose 3' ends are complementary to the 3' ends of the recipient linearized plasmid. The PCR product and the linearized plasmid are spliced together in a second PCR reaction in which Taq polymerase extends the complementary overlapping 3' ends (ligation by overlap extension). Denaturation followed by heterologous reannealing and cyclization results in a cyclic recombinant plasmid with two nicks that may be used directly to transform competent Escherichia coli. In our hands, ligase-free subcloning is rapid, and offers many advantages over existing strategies.     

PCR-mediated whole genome amplification of phytoplasmas

A method was developed for genome analysis of phytoplasmas, bacterial plant pathogens that cannot be cultivated in vitro in cell-free media. The procedure includes a CsCl-bisbenzimide gradient buoyant centrifugation followed by polymerase chain reaction (PCR)-mediated whole genome amplification. The latter step involves digestion of the DNA by a restriction enzyme with an A/T-rich recognition sequence. Due to the different A/T content in the DNA of the pathogen and its plant host, the fragments originating from phytoplasma are shorter and are preferentially amplified in the PCR reaction. Products obtained were cloned and screened by dot-blot hybridization. Results showed that about 90% of recombinant clones appeared to harbor phytoplasma specific DNA inserts. Sequencing of randomly selected clones was carried out and comparison with the NCBI database confirmed the bacterial origin for the sequences, which have been assigned a putative function. The origin of the recombinant clones was further confirmed by the generation of specific amplicons from the phytoplasma-infected plant and not from the healthy control, using PCR primers devised from the sequences of the recombinant clones. This method could be used for genome-wide comparisons between phytoplasmas.     

Functional cloning vectors for use in directional cDNA cloning using cohesive ends produced with T4 DNA polymerase.

This paper describes the construction of 'Prime' cloning vectors, which include phage lambda and plasmid vectors useful for functional cloning in oocytes, yeast, and mammalian cells, and their use in a 'Prime' cloning system. The system takes advantage of the very active and precise 3' exonuclease activity of T4 DNA polymerase to produce single-stranded (ss) ends (cut-back) of vector and insert DNA. This results in the highly efficient directional cloning of cDNA and PCR-amplified DNA. The system obviates the need to digest insert DNA with a restriction endonuclease to unveil cloning sites, and thus eliminates the chance of internal digestion of the insert DNA. The cloning of PCR-amplified DNA, which is sometimes difficult, is made routine with this system. The 'Prime' sequence is included in vector cloning sites and cDNA and PCR primers. The 'Prime' sequence was chosen so that the ss sticky ends are nonpalindromic and will hybridize only to the appropriate partners. This makes cloning with the 'Prime' system very efficient, because neither the vector nor insert DNA is lost to unproductive self-hybridization.     

A novel simple and rapid PCR-based site-directed mutagenesis method

Site-directed mutagenesis (SDM) is a powerful tool for exploring protein structure and function, and several procedures adjusted to specific purposes are still being developed. Herein we describe a straightforward and efficient method with versatile applications for introducing site-specific alterations in any deoxyribonucleic acid (DNA) sequence cloned in a plasmidic expression vector. In this polymerase chain reaction (PCR)-based SDM method, forward and reverse primers are used to amplify the plasmid containing the sequence of interest. The primers are designed so that the desired modifications are introduced at the 5′ end of one of the primers, whereas the other primer starts with the nucleotide at position (−1) of the one to be modified. The PCR is carried out using Pfu DNA polymerase. The blunt-ended PCR-generated DNA fragment is self-ligated and used to transform Escherichia coli. Mutant clones are screened by colony hybridization using the mutagenic primer as probe and the presence of the mutation is confirmed by direct DNA sequencing. This procedure was used efficiently to introduce substitutions, deletions, and insertions in the DNA sequences coding for a recombinant form (scFv) of antibody 107 specific of the human CR3 molecule, the rat α integrin CD11b A-domain and the human CD8β cloned in pPICZαB, pGEX-2T, and CDM8 expression vectors, respectively.     

An Alternative Approach in Gateway® Cloning when the Bacterial Antibiotic Selection Cassettes of the Entry Clone and Destination Vector are the Same

The Gateway^® recombination technology has revolutionized the method of gene cloning for functional analyses and high-throughput ORFeome projects. In general, Gateway cloning is highly efficient because after LR recombination and bacterial transformation, only cells containing the recombinant destination clone are selected on an antibiotic selection plate. However, when the antibiotic resistance gene for bacterial selection is the same in the entry and destination vectors, the direct selection of recombinant destination clones on an antibiotic plate is difficult. Here, we demonstrate an efficient and comprehensive approach to obtain positive destination clones directly on an antibiotic selection plate in this situation. The strategy involves polymerase chain reaction (PCR)-mediated amplification of the entry clone using entry vector-specific primers that bind outside the attL sequences and the subsequent use of this purified PCR product for LR recombination with the destination vector. Our results suggest that cloning of linear DNA fragments into circular destination vectors through LR recombination is an efficient method for inserts up to 7 kb in size. Using this approach, the yield of colony PCR positive destination clones was 100 % for genes of various sizes tested in our experiments.     

Construction of a full-length human T cell leukemia virus type I genome from MT-2 cells containing multiple defective proviruses using overlapping polymerase chain reaction

Human T cell leukemia virus type I (HTLV-I), the etiological agent of adult T cell leukemia, integrates into the host genome as a provirus. Multiple defective copies of the integrated provirus are often present in the host genome. For this reason it is difficult to clone the intact provirus from HTLV-I-infected cells using conventional techniques. Here, we used overlapping polymerase chain reaction (PCR) to construct a full-length provirus of HTLV-I directly from an HTLV-I-transformed cell line, MT-2, which contains multiple defective proviruses. First, four overlapping proviral HTLV-I fragments (1.4-3.9 kb each) were constructed from genomic MT-2 DNA using PCR. Next, the complete HTLV-I proviral DNA (9 kb) was generated from these fragments using asymmetric PCR and cloned into a plasmid vector. 293 T cells transfected with this plasmid produced virus-like particles, and we show that these particles are capable of infecting a human T cell line. We propose that this cloning technique constitutes a powerful tool for constructing infectious molecular clones from cells of patients infected with HTLV-I or other viruses.     

Plasmid vector for cloning in Streptococcus pneumoniae and strategies for enrichment for recombinant plasmids

A new plasmid, pLS101, was constructed for use as a vector for cloning in Streptococcus pneumoniae. This plasmid carries two selectable genes, tet and malM, each of which contains two or more restriction sites for cloning. Insertional inactivation of the malM gene allowed direct selection of TcRMal- clones containing recombinant plasmids. Other means of enriching a recipient population for cells containing recombinant plasmids were examined. The effect of removing vector terminal phosphate in attempts to clone heterogeneous DNA fragments, such as those from chromosomal DNA, was to abolish recombinant plasmid establishment altogether, presumably because donor DNA processing during entry into the cell prevented establishment of the hemiligated molecule. However, with homogeneous DNA fragments, such as those from plasmid or viral DNA, vector phosphate removal allowed enrichment for recombinant plasmids. In the cloning of heterogeneous DNA that was homologous to the recipient chromosome (i.e. chromosomal DNA from S. pneumoniae), recovery of recombinant plasmids could be enriched tenfold (relative to the regenerated vector) by the process of chromosomal facilitation of plasmid establishment. This involved an additional passage of the mixed plasmids in which interaction with the chromosome of plasmids containing chromosomal DNA inserts (i.e. recombinant plasmids) increased their frequency of establishment relative to the vector plasmid. An overall strategy for cloning in S. pneumoniae, depending on the nature of the fragment to be cloned, is proposed.     

用寡核苷酸本身作为PCR引物检测其重组DNA

以待检测的寡核苷酸本身作为一个引物,加上两个载体特异引物,组成两对PCR引物。含待检测寡核苷酸片段的重组DNA用这两对引物可分别扩增出两个大小不同的片段,而载体DNA只有一对引物（即载体特异引物）可扩增出一个较小的片段。     

Optimal Cloning of PCR Fragments by Homologous Recombination in Escherichia coli

PCR fragments and linear vectors containing overlapping ends are easily assembled into a propagative plasmid by homologous recombination in Escherichia coli. Although this gap-repair cloning approach is straightforward, its existence is virtually unknown to most molecular biologists. To popularize this method, we tested critical parameters influencing the efficiency of PCR fragments cloning into PCR-amplified vectors by homologous recombination in the widely used E. coli strain DH5α. We found that the number of positive colonies after transformation increases with the length of overlap between the PCR fragment and linear vector. For most practical purposes, a 20 bp identity already ensures high-cloning yields. With an insert to vector ratio of 2:1, higher colony forming numbers are obtained when the amount of vector is in the range of 100 to 250 ng. An undesirable cloning background of empty vectors can be minimized during vector PCR amplification by applying a reduced amount of plasmid template or by using primers in which the 5′ termini are separated by a large gap. DpnI digestion of the plasmid template after PCR is also effective to decrease the background of negative colonies. We tested these optimized cloning parameters during the assembly of five independent DNA constructs and obtained 94% positive clones out of 100 colonies probed. We further demonstrated the efficient and simultaneous cloning of two PCR fragments into a vector. These results support the idea that homologous recombination in E. coli might be one of the most effective methods for cloning one or two PCR fragments. For its simplicity and high efficiency, we believe that recombinational cloning in E. coli has a great potential to become a routine procedure in most molecular biology-oriented laboratories.     

应用PCR技术定向引入DNA小片段的策略

描述一种应用PCR技术定向引入DNA小片段和特异酶切位点的方法。为了获得m2/loxp66EGFPloxp71基因片段。根据EGFP基因序列,设计一对特异引物,上、下游引物分别引入m2/loxp66、loxp71序列和Xhol、Mlu1酶切位点。以pEGFPN1质粒为模板,采用PCR扩增以合成DNA双链,插入到克隆载体pMD18T。对重组子测序结果表明,实现了DNA小片段和酶切位点的定向引入。     

用PCR直接筛选和鉴定虎纹捕鸟蛛毒素Ⅰ的重组阳性克隆

以合成的两段插入序列为上、下游引物用PCR法直接筛选插入有虎纹捕鸟蛛毒素Ⅰ（HWTX－Ⅰ）cDNA的重组阳性克隆。并用PCR法快速鉴定重组体中插入片段的正、反连接方向,扩增用引物是以位于克隆位点上游的一段载体序列上游引物,以插入序列为下游引物。对100个单克隆进行了上述两次PCR筛选鉴定,选取2个有靶片段插入并且为正向连接的重组子进行测序,其结果证实了插入片段及其方向的正确性。