Destruction of Bacillus licheniformis spores by microwave irradiation

Aims:  To investigate the sporicidal mechanisms of microwave irradiation on Bacillus licheniformis spores.
Methods and Results:  We measured spore viability and the release of DNA and proteins, and performed transmission electron microscopy (TEM). A microwave oven (0·5 kW) was modified to output power at 2·0 kW, which allowed a shorter sterilization cycle. A 2·0 kW microwave treatment at the boiling temperature for 1 min did not kill all spores, but killed most spores. The spore inactivation rate was faster than that of boiling and 0·5 kW microwave oven. In contrast to boiling and 0·5 kW microwave treatments, the 2·0 kW microwave resulted in significant leakage of proteins and DNA from spores due to injury to the spore structure. TEM revealed that 2·0 kW microwave irradiation affected spore cortex hydrolysis and swelling, and ruptured the spore coat and inner membrane.
Conclusions:  These results suggest that 2·0 kW microwave irradiation ruptures the spore coat and inner membrane, and is significantly different from boiling.
Significance and Impact of the Study:  This study provides information on the sporicidal mechanisms of microwave irradiation on B. licheniformis spores.     

PlcR在炭疽芽胞杆菌A16R中的功能研究

炭疽芽胞杆菌(Bacillus anthracis)、蜡样芽胞杆菌(B. cereus)和苏云金芽胞杆菌(B. thuringiensis)均属于蜡样芽胞杆菌群,在遗传学上有很高的相似性。PlcR (Phospholipase C regulator)在蜡样芽胞杆菌中是十分重要的调控因子,但plcR基因在炭疽芽胞杆菌中发生一个无义突变导致在炭疽芽胞杆菌中产生一个截短PlcR蛋白。为了研究plcR基因对炭疽芽胞杆菌功能的影响,文章以蜡样芽胞杆菌CMCC6330基因组为模板,构建重组表达质粒pBE2A-plcR后导入炭疽芽胞杆菌疫苗株A16R中获得重组菌株,对其进行表型分析。结果显示,炭疽芽胞杆菌重组菌株的溶血活性基本没有恢复,但恢复了部分神经鞘磷脂酶活性,表明将蜡样芽胞杆菌的plcR基因导入炭疽芽胞杆菌后,可以直接激活神经鞘磷脂酶活性。     

Identification of strain specific markers in Bacillus anthracis by random amplification of polymorphic DNA

Classification and differentiation of Bacillus anthracis isolates by genetic markers play an important role in anthrax research. We used a PCR based method--Random Amplification of Polymorphic DNA (RAPD)--to identify genetic markers in B. anthracis strains. Twenty-five differential genetic markers were identified which divided the strains into five different groups. Three selected RAPD-markers were cloned and sequenced. The five RAPD-derived genotypes could be defined by integration of these three markers. This system offers a simple non-expensive method to classify B. anthracis strains in laboratories involved in the research of this bacterium.     

2-D reference map of Bacillus anthracis vaccine strain A16R proteins

Bacillus anthracis has always been an important pathogen because it can cause lethal inhalational anthrax, and may be used as a bioweapon or by bioterrorists. In this study, a 2-DE reference map and database of B. anthracis A16R was constructed. In total, 534 spots were processed, and 406 spots representing 299 proteins were identified. Gel-estimated pIs and molecular masses mostly matched well with their theoretical predictions, but some discrepancies also existed. Spot and protein corresponding analysis revealed that post-translational modifications might be common in B. anthracis. Through the MASCOT search, the similarity of B. anthracis, B. cereus and B. thuringiensis was further verified by protein level and a possible annotation error in B. anthracis strain Ames 0581 genome was found. Proteins of energy metabolism, fatty acid and phospholipid metabolism, protein synthesis, and cellular processes represented a large part of the most abundant proteins. At the same time, 27 hypothetical proteins were experimentally proved. There were 28 proteins also identified as spore composition in recently spore-related research, which indicated that they might play some roles in different phases such as growth, sporulation and outgrowth. Maps and information about all identified proteins are available on the Internet at http://www.mpiib-berlin.mpg.de/2D-PAGE and http://www.proteomics.com.cn.     

Inactivation of Bacillus endospores in envelopes by electron beam irradiation

The anthrax incidents in the United States in the fall of 2001 led to the use of electron beam (EB) processing to sanitize the mail for the U.S. Postal Service. This method of sanitization has prompted the need to further investigate the effect of EB irradiation on the destruction of Bacillus endospores. In this study, endospores of an anthrax surrogate, B. atrophaeus, were destroyed to demonstrate the efficacy of EB treatment of such biohazard spores. EB exposures were performed to determine (i) the inactivation of varying B. atrophaeus spore concentrations, (ii) a D10 value (dose required to reduce a population by 1 log10) for the B. atrophaeus spores, (iii) the effects of spore survival at the bottom of a standardized paper envelope stack, and (iv) the maximum temperature received by spores. A maximum temperature of 49.2 degrees C was reached at a lethal dose of approximately 40 kGy, which is a significantly lower temperature than that needed to kill spores by thermal effects alone. A D10 value of 1.53 kGy was determined for the species. A surface EB dose between 25 and 32 kGy produced the appropriate killing dose of EB between 11 and 16 kGy required to inactivate 8 log10 spores, when spore samples were placed at the bottom of a 5.5-cm stack of envelopes.     

The extracellular and cytoplasmic proteomes of the non-virulent Bacillus anthracis strain UM23C1-2

The recently published genome sequence of Bacillus anthracis Ames has facilitated the prediction of proteins associated with the virulence of this bacterium. The aim of this study was to define reference maps for the extracellular and cytoplasmic proteomes of the avirulent B. anthracis strain UM23C1-2 that are useful for physiological studies and the development of improved vaccines. Using 2-DE and subsequent MALDI-TOF-TOF MS, 64 proteins were identified in the extracellular proteome, only 29 of which were predicted to be exported into the culture medium. The latter included chitinases, proteases, nucleotidases, sulfatases, phosphatases and proteins of unknown function. Of the remaining proteins in the culture medium, 18 were predicted to be associated with the cell wall or anchored on the trans side of the cytoplasmic membrane while 17 other proteins lacked identifiable export signals and were predicted to be cytoplasmic proteins. Among the S-layer proteins, Sap and Eag account for 10% of the total extracellular proteome. Many of the proteins are predicted to contribute to the virulence and antigenic signature of B. anthracis. We have also studied the composition of the cytoplasmic proteome, identifying 300 distinct proteins. The most abundant cytoplasmic proteins are primarily those involved in glycolysis, amino acid metabolism, protein translation, protein folding and stress adaptation. The presence of a variety of proteases, peptidases, peptide binding proteins, as well as enzymes required for the metabolism of amino acids, suggests that B. anthracis is adapted to life in a protein-rich environment rather than the soil. We therefore speculate that proteases and peptidases could be useful targets for the development of improved vaccines. In addition, both of these B. anthracis compartment-specific proteomes can be used as reference maps to monitor changes in the production of secreted and cytosolic proteins that occur, for example, during growth in macrophages.     

炭疽芽胞杆菌A16D2株BA2380基因缺失突变株的构建

本课题组早期研究结果表明,炭疽芽胞杆菌BA2380蛋白可能与炭疽芽胞杆菌毒力有关,因而有必要对其功能进行深入研究。选取炭疽芽胞杆菌A16D2株为出发菌株,以其BA2380基因为目的缺失基因,参照A16D2株基因组序列及质粒pSET4s序列,利用软件设计上下游同源臂及抗性基因引物,用本实验室改造的“Golden Gate”克隆方法将3个片段同时连入温敏型穿梭载体pKMBK中(本实验室构建的受体质粒),从而构建基因打靶质粒。将该基因打靶质粒导入炭疽芽胞杆菌A16D2感受态细胞中,利用同源重组原理,筛选获得炭疽芽胞杆菌A16D2 BA2380基因缺失突变株,并对其进行验证。结果验证了本课题组构建的“Golden Gate”克隆体系进行多片段克隆的高效性,也为后续探索其基因功能奠定了基础。     

Virulent spores of Bacillus anthracis and other Bacillus species deposited on solid surfaces have similar sensitivity to chemical decontaminants

AIMS: To compare the relative sensitivity of Bacillus anthracis and spores of other Bacillus spp. deposited on different solid surfaces to inactivation by liquid chemical disinfecting agents. METHODS AND RESULTS: We prepared under similar conditions spores from five different virulent and three attenuated strains of B. anthracis, as well as spores of Bacillus subtilis, Bacillus atrophaeus (previously known as Bacillus globigii), Bacillus cereus, Bacillus thuringiensis and Bacillus megaterium. As spore-surface interactions may bias inactivation experiments, we evaluated the relative binding of different spores to carrier materials. The survival of spores deposited on glass, metallic or polymeric surfaces were quantitatively measured by ASTM standard method E-2414-05 which recovers spores from surfaces by increasing stringency. The number of spores inactivated by each decontaminant was similar and generally within 1 log among the 12 different Bacillus strains tested. This similarity among Bacillus strains and species was observed through a range of sporicidal efficacy on spores deposited on painted metal, polymeric rubber or glass. CONCLUSIONS: The data obtained indicate that the sensitivity of common simulants (B. atrophaeus and B. subtilis), as well as spores of B. cereus, B. thuringiensis, and B. megaterium, to inactivation by products that contain either: peroxide, chlorine or oxidants is similar to that shown by spores from all eight B. anthracis strains studied. SIGNIFICANCE AND IMPACT OF THE STUDY: The comparative results of the present study suggest that decontamination and sterilization data obtained with simulants can be safely extrapolated to virulent spores of B. anthracis. Thus, valid conclusions on sporicidal efficacy could be drawn from safer and less costly experiments employing non-pathogenic spore simulants.     

Comparative analysis of virulence factors secreted by Bacillus anthracis Sterne at host body temperature

Aims: For the analysis of virulence factors produced and secreted by Bacillus anthracis vegetative cells during mammalian host infection, we evaluated the secretome of B. anthracis Sterne exposed to host‐specific factors specifically to host body temperature. Methods and Results: We employed a comparative proteomics‐based approach to analyse the proteins secreted by B. anthracis Sterne under host‐specific body temperature conditions. A total of 17 proteins encoded on a single chromosome and the pXO1 plasmid were identified by peptide mass fingerprinting. Multiple algorithms were used to predict the secretion mechanisms of the detected proteins in B. anthracis. Conclusions: Several putative virulence factors and known factors responsible for sporulation were differentially regulated, including CodY, pXO1‐130 and BA1952, revealing insights into temperature cues in the B. anthracis secretome. Significance and Impact of the Study: This study identified temperature‐regulated proteins. Further studies aimed at understanding the physical and functional roles of these proteins in infection and control by elevated temperatures will contribute to detection, diagnostics and prophylaxis.     

Identification and characterization of Bacillus anthracis by multiplex PCR analysis of sequences on plasmids pXO1 and pXO2 and chromosomal DNA

Abstract Bacillus anthracis can be identified on the basis of the detection of virulence factor genes located on two plasmids, pXO1 and pXO2. Thus isolates lacking both pXO1 and pXO2 are indistinguishable from closely related B. cereus group bacteria. We developed a multiplex PCR assay for characterization of B. anthracis isolates, and simultaneous confirmation of the species identity independent of plasmid content. The assay amplifies lef, cya, pag (pXO1) and cap (pXO2) genes, and a B. anthracis specific chromosomal marker, giving an easy-to-read profile. This system unambiguously identified virulent (pXO1⁺/2⁺) and avirulent (pXO1⁺/2⁻, pXO1⁻/2⁺ and pXO1⁻/2⁻) strains of B. anthracis and distinguished 'anthrax-like' strains from other B. cereus group bacteria.     

Development of a rapid and sensitive immunoassay for detection and subsequent recovery of Bacillus anthracis spores in environmental samples

Bacillus anthracis is considered a major threat as an agent of bioterrorism. B. anthracis spores are readily dispersed as aerosols, are very persistent, and are resistant to normal disinfection treatments. Immunoassays have been developed to rapidly detect B. anthracis spores at high concentrations. However, detection of B. anthracis spores at lower concentrations is problematic due to the fact that closely related Bacillus species (e.g., B. thuringiensis) can cross-react with anti-B. anthracis antibodies, resulting in false positive detections. Subsequent polymerase chain reaction (PCR) analysis is required to differentiate virulent strains. We report here on a protocol for the rapid, sensitive detection of B. anthracis spore using the Integrating Waveguide Biosensor followed by a method for the rapid release and germination of immunocaptured spores. A detection limit of ca. 10³ spores was achieved by incubating spores simultaneously with capture and detection antibodies (“liquid-phase” assay) prior to capture on capillary tubes/waveguides. Subsequent incubation with BHI broth directly in capillary tubes allowed for rapid germination, outgrowth, and release of spores, resulting in vegetative cells for PCR analysis.     

体外筛选炭疽芽孢适配子

用SELEX技术 ,寻获炭疽芽孢适配子 ,研究其亲和功能及是否作为炭疽芽孢的检测分子。化学合成长度为 35mer的随机DNA库 ,以炭疽杆菌疫苗株A .16R芽孢为靶标进行 18轮的筛选 ,筛选产物克隆、测序 ,利用生物素 亲和素 辣根过氧化物酶显色系统判断适配子与芽孢的结合活性 ;计算机软件分析测序适配子保守序列和二级结构 ;以兔抗炭疽芽孢抗体为捕获分子 ,适配子为检测分子混合夹心法检测炭疽芽孢。第 18轮筛选的适配子与芽孢结合后A值比第 1轮的提高了 3733 .33 %以上 ;测序 79个序列中 ,A值最高为 1.2 0 ,最低为 0 .2 0 ;混合夹心法检测表明 ,适配子量为 16 μg ,芽孢为 4× 10 7个时 ,显色信号强度最强。结果提示 ,其 5′端茎环及发夹结构是与芽孢结合的基础 ,远程高级结构对其结合功能有一定的影响 ;寡核苷酸适配子可以作为炭疽芽孢的检测分子     

Induction of opsonic antibodies to the gamma-D-glutamic acid capsule of Bacillus anthracis by immunization with a synthetic peptide-carrier protein conjugate

The capsule of Bacillus anthracis, a polymer of gamma-D-glutamic acid, functions as a virulence determinant and is a poor immunogen. In this study we show that antibodies reactive with the B. anthracis capsule can be elicited in mice by immunization with a conjugate consisting of a synthetic gamma-D-glutamic acid nonamer peptide (gamma-D-glu9) covalently coupled to keyhole limpet hemocyanin. The serum response to gamma-D-glu9 was comprised primarily of IgG antibodies that recognized an epitope requiring a minimum of four gamma-linked D-glutamic acid residues. Antibodies to (gamma-D-glu9) bound to the surface of encapsulated B. anthracis cells and mediated opsonophagoctosis. These findings suggest that anti-capsular antibodies could mediate the clearance of vegetative B. anthracis cells in vivo. Thus, inclusion of an immunogenic capsular component as well as protective antigen in new anthrax vaccines would generate immune responses targeting both the bacteremic and toxigenic aspects of anthrax infection and thus may increase protective efficacy.     

Spin labelling of Bacillus anthracis endospores: a model for in vivo tracking by EPR imaging

Anthrax is caused by the gram-negative bacterium, Bacillus anthracis. Infection by this microbe results from delivery of the endospore form of the bacillus through direct contact, either topical or inhalation. With regard to the latter route of administration, it is proposed that endospores of B. anthracis enter the lungs and are phagocytized by host alveolar macrophages. Thereafter, it is unclear as to how endospores travel to distal loci and what tissues are the targets. Herein, this study describes the spin labelling of endospores through two different approaches with various aminoxyls. Indeed, after exposure to RAW 264.7 cells, these aminoxyl-containing endospores were phagocytized, as demonstrated by EPR spectroscopy of the infected macrophage, thus providing a potential tool for EPR imaging in animals.     

A combined immunomagnetic separation and lateral flow method for a sensitive on-site detection of Bacillus anthracis spores – assessment in water and dairy products

Aim:  Combination of immunomagnetic separation (IMS) and lateral flow device (LFD) assays for the development of a sensitive, rapid, on-site methodology that enables concentration and detection of Bacillus anthracis spores in complex samples.
Methods and Results:  The data presents the development of an optimized, 30 min, IMS assay, with about 95% capture of B. anthracis spores from different dairy products ( n  = 38). No cross reactivity was detected with typical milk flora and some closely related Bacilli. To enable direct application of the IMS captured spores on the LFD, spores were eluted from the bead–spore complex utilizing 95% (v/v) formamide-10 mmol l⁻¹ EDTA for 30 s in a microwave oven. Detached spores were analysed on LFD enabling detection within 10 min. The combined IMS–LFD methodology (40 min) demonstrates a 60-fold improvement in sensitivity, relative to samples that were applied directly on the LFD without the IMS concentrating step.
Conclusions:  The IMS–LFD method is a powerful platform, combining rapidity, specificity and efficiency for concentrating and detecting B. anthracis from water and milk contaminated samples.
Significant and Impact of the Study:  The combination of IMS and LFD enhances the sensitivity and flexibility of B. anthracis spore detection from complex samples. This method can potentially be extended to other toxins and micro-organisms in a variety of matrices.     

The resistance of Bacillus atrophaeus spores to the bactericidal activity of peracetic acid is influenced by both the nature of the solid substrates and the mode of contamination

Aims: To evaluate the impact of the mode of contamination in relation with the nature of solid substrates on the resistance of spores of Bacillus atrophaeus ‐selected as surrogates of Bacillus anthracis‐ to a disinfectant, peracetic acid. Methods and Results: Six materials confronted in urban and military environments were selected for their different structural and physicochemical properties. In parallel, two modes of contamination were examined, i.e. deposition and immersion. Deposition was used to simulate contamination by an aerosol and immersion by an extended contact with liquids. A pronounced difference in the biocontamination levels and spatial organization of spores was observed depending on the mode of contamination and the nature of the solid substrate considered, with consequences on decontamination. Contamination by immersion led to lower efficiency of peracetic acid decontamination than contamination by deposition. Infiltration of spores into porous materials after immersion is one reason. In contrast, the deposition mode aggregates cells at the surface of materials, explaining the similar disinfecting behaviour of porous and nonporous substrates when considering this inoculation route. Conclusions: The inoculation route was shown to be as influential a parameter as material characteristics (porosity and wettability) for decontamination efficacy. Significance and Impact of the Study: These results provide comparative information for the decontamination of B. atrophaeus spores in function of the mode of contamination and the nature of solid substrates.